Warzone WZ-8MTB 8" Marine Tower Speakers

The Warzone WZ-8MTB is a pair of 8-inch enclosed tower speakers designed for open-air vehicle and marine audio installations. It provides a practical audio solution for wakeboard towers, UTV roll cages, golf carts, and Jeep-style roof-rack setups where conventional interior speakers are less effective. Integrated RGB grille-ring lighting adds a visual accent for nighttime use.

Built as a matched pair, the WZ-8MTB combines an 8-inch woofer and dome tweeter in each enclosure. The system is rated at 500 watts RMS and 1000 watts maximum per pair at 4 ohms. Its 90 dB sensitivity and 60 Hz to 20 kHz frequency response are specified for clear playback in outdoor environments with wind, water, and vehicle noise.

Each woofer uses an injection polypropylene cone with a rubber-edge surround. A 1.5-inch Kapton voice coil and 30 oz high-density flux ferrite magnet support the low- and mid-frequency section. The design is intended to deliver the durability and output needed for exposed tower or cage mounting locations.

A 38 mm dome tweeter handles upper-frequency detail alongside the 8-inch woofer. The tweeter uses a 1-inch KSV voice coil. Together, the driver arrangement gives the speaker pair a full-range sound character suitable for music playback outside the cabin.

The WZ-8MTB can be used as part of a 12V marine or powersports audio upgrade with a compatible amplifier and RGB lighting connection. It is suited to installations that need speakers mounted above or outside the main seating area. Mounting clamps are included to support tower, roll-cage, and roof-rack installation applications.

Key Features

• Matched 8-Inch Speaker Pair: Two enclosed speakers provide a coordinated left and right tower-audio setup.
• 500W RMS Per Pair: Handles up to 500 watts RMS and 1000 watts maximum per pair.
• 4-Ohm Impedance: Works with an amplifier designed to support a 4-ohm speaker load.
• RGB Grille-Ring Lighting: Integrated 12V lighting offers 12 color modes for added visual customization.
• Polypropylene Woofer: Injection polypropylene cones and rubber-edge surrounds support outdoor-oriented speaker use.
• Included Mounting Clamps: Clamps support installation on compatible towers, cages, and roof racks.

Design & Installation

The WZ-8MTB uses black enclosed speaker housings with an 8-inch injection polypropylene woofer, rubber-edge surround, ferrite magnet, and dome tweeter in each unit. Its woofer uses a 1.5-inch Kapton voice coil, while the tweeter uses a 1-inch KSV voice coil. The integrated RGB grille-ring lighting is designed for a 12V electrical system.

For installation, mount the pair to a compatible wakeboard tower, roll cage, or roof rack using the included clamps. Connect the speakers to a compatible 4-ohm amplifier and wire the RGB lighting to an appropriate 12V lighting connection. Confirm mounting-surface fitment, clamp compatibility, amplifier capability, and wiring requirements before installation.