{"title":"Speakers","description":null,"products":[{"product_id":"gravity-wzp65-warzone-series-6-5-inch-pro-midrange-coaxial-loud-speaker-4-ohms-with-600-watt-max-1-speaker-corrugated-speaker-surround-with-oversize-magnet-motor-structure","title":"WARZONE WZP65 6.5\" Pro Midrange Coaxial Speaker","description":"\u003cp\u003eThe WARZONE WZP65 is a 6.5-inch pro midrange coaxial loudspeaker intended for car-audio systems that need dedicated vocal and instrument-range output. Its 4-ohm nominal impedance supports use with compatible aftermarket amplification. The speaker is sold as a single unit for custom installations, replacement applications, or multi-speaker builds.\u003c\/p\u003e\u003cp\u003eThis model is rated for up to 600 watts maximum power and has a listed frequency response of 90 Hz to 22 kHz. That range places its focus on midrange presence while extending into upper-frequency detail through its coaxial design. A listed 95 dB sensitivity can help it produce useful output with appropriately matched amplifier power.\u003c\/p\u003e\u003cp\u003eThe WZP65 uses a 1.5-inch voice coil and a 20-ounce magnet. Its oversized magnet motor structure is intended to support the driver during higher-output use. A corrugated surround is also part of the speaker design.\u003c\/p\u003e\u003cp\u003eFor listeners building a high-output system, the WZP65 can be used for front-stage, door-panel, kick-panel, or custom-panel midrange duty where physical fitment allows. Its 6.5-inch format is common in aftermarket car-audio locations, but actual vehicle fitment should always be measured. Because its listed low-frequency limit is 90 Hz, pairing it with a subwoofer can help cover deeper bass frequencies.\u003c\/p\u003e\u003cp\u003eThe WZP65 is a passive speaker, so it needs a compatible amplified audio signal and proper speaker wiring. Match the amplifier to the speaker's 4-ohm load and set crossover points thoughtfully for the application. Confirm available mounting depth and cutout space before beginning an installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Design:\u003c\/strong\u003e Combines midrange and high-frequency reproduction in one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600W Maximum Power:\u003c\/strong\u003e Supports use in appropriately configured higher-output audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Nominal Impedance:\u003c\/strong\u003e Works with amplifiers designed for a 4-ohm speaker load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90 Hz–22 kHz Response:\u003c\/strong\u003e Covers midrange content and extends into upper frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20-Ounce Magnet:\u003c\/strong\u003e Provides the magnetic motor structure specified for this driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrugated Surround:\u003c\/strong\u003e Forms part of the driver suspension and speaker construction.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZP65 is built around a paper cone, corrugated surround, 1.5-inch voice coil, and oversized magnet motor structure. Its coaxial layout places the high-frequency driver within the main 6.5-inch speaker assembly. The listed mounting style is flush mount, with a nominal basket diameter of 7.13 inches.\u003c\/p\u003e\u003cp\u003eVerify a mounting depth of at least 3.58 inches and a cutout near the listed 5.71-inch diameter before installation. Use secure mounting hardware and correctly polarized speaker wiring, then pair the speaker with a compatible 4-ohm amplifier channel. For a fuller system, use suitable crossover settings and add a subwoofer for frequencies below the WZP65's stated response range.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":43915363778751,"sku":"704129655669","price":39.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/91BKy8c-jCL.jpg?v=1734558113"},{"product_id":"gravity-wzp69-warzone-series-6x9-inch-4-ohm-pro-midrange-coaxial-loud-corrugated-surround-speaker-4-ohms-with-800w-max-1-speaker-car-audio-high-standard-reliability-testing","title":"WARZONE WZP69 6x9\" Pro Midrange Coaxial Speaker","description":"\u003cp\u003eThe WARZONE WZP69 is a 6 x 9-inch pro midrange coaxial speaker designed for car-audio systems that need strong, clear vocal and instrument reproduction. Its 4-ohm design supports use with compatible aftermarket amplification and speaker wiring. The speaker is intended for enthusiasts building or upgrading a vehicle sound system with dedicated midrange coverage.\u003c\/p\u003e\u003cp\u003eWith a stated 800-watt maximum power rating and 95 dB sensitivity, the WZP69 is built to deliver assertive output from an appropriately matched system. Its stated 85 Hz to 22 kHz frequency response covers a broad midrange-to-high-frequency range. The coaxial configuration helps consolidate that coverage into a single 6 x 9-inch speaker location.\u003c\/p\u003e\u003cp\u003eThe WZP69 uses a corrugated surround and an oversized magnet motor structure to support its pro-audio-oriented construction. A 25-ounce high-energy magnet is specified for the speaker. These components are intended to provide stable operation in demanding mobile-audio installations.\u003c\/p\u003e\u003cp\u003eThis speaker is a practical option for systems using 6 x 9-inch mounting locations or custom speaker panels. Its 4-ohm impedance should be matched with an amplifier or head-unit channel rated to operate at 4 ohms. Because the listed 800-watt figure is a maximum rating, amplifier selection should be based on confirmed continuous-power specifications where available.\u003c\/p\u003e\u003cp\u003eFor a more complete system, the WZP69 can be used alongside dedicated low-frequency speakers or subwoofers for bass support. Its stated frequency range begins at 85 Hz, so system tuning and crossover choices should reflect the vehicle, installation position, and other speakers in use. Verify cutout dimensions and mounting clearance before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 x 9-Inch Pro Speaker:\u003c\/strong\u003e Fits applications designed for 6 x 9-inch car-audio drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoaxial Design:\u003c\/strong\u003e Combines midrange-oriented coverage in one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e800W Maximum Power:\u003c\/strong\u003e Supports high-output system designs with proper matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible 4-ohm amplifier or receiver channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e95 dB Sensitivity:\u003c\/strong\u003e Helps produce strong output from available amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25-Ounce Magnet:\u003c\/strong\u003e Supports the speaker's oversized magnet motor structure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZP69 features a corrugated speaker surround, 25-ounce high-energy magnet, and oversized magnet motor structure. Its pro midrange coaxial format is designed for vehicle audio use and is listed as having undergone high-standard reliability testing. The nominal basket measures 9.29 by 6.56 inches.\u003c\/p\u003e\u003cp\u003eConfirm the 8.82 by 6.04-inch mounting opening and 4.21-inch mounting-depth requirement before purchasing. Connect it to a compatible 4-ohm speaker channel, observe amplifier and crossover manufacturer guidance, and ensure the installation location has adequate rear clearance. The product is listed as one speaker, so a left-and-right installation requires two units.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":43915376230591,"sku":"704129655676","price":42.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/813NWV_zzaL.jpg?v=1735599764"},{"product_id":"gravity-warzone-series-8-inch-pro-midrange-coaxial-loud-speaker-4-ohms-with-800w-max-1-speaker-wzp80-corrugated-speaker-surround-with-oversize-magnet-motor-structure","title":"Gravity WZP80 8\" Warzone Coaxial Midrange Speaker","description":"\u003cp\u003eThe Gravity WZP80 is an 8-inch PRO midrange coaxial car speaker designed for vehicle audio installations that need a dedicated midrange driver. It is sold as one speaker and uses a 4-ohm nominal impedance. Its published specifications make it appropriate for custom door, rear-deck, kick-panel, or fabricated speaker-location upgrades when mounting space permits.\u003c\/p\u003e\u003cp\u003eThis speaker addresses the need for an 8-inch driver with a stated 80Hz-22kHz frequency response and 95dB sensitivity. It is intended for listeners building or expanding a multi-speaker car audio system rather than replacing a compact factory speaker without measuring first. The coaxial format keeps the driver assembly consolidated in one mounting location.\u003c\/p\u003e\u003cp\u003eGravity rates the WZP80 at up to 800 watts maximum power handling. The stated 4-ohm impedance should be matched with an amplifier or audio system designed to operate safely at a 4-ohm speaker load. Because no RMS power rating is published for this model, amplifier matching should not be based on an assumed continuous-power figure.\u003c\/p\u003e\u003cp\u003eThe WZP80 uses a corrugated speaker surround and an oversize magnet motor structure. Its magnet is specified at 25 ounces. These published construction details support the speaker's PRO midrange-oriented design while preserving the specified 8-inch mounting format.\u003c\/p\u003e\u003cp\u003eFor system planning, the WZP80 requires a 7.32-inch mounting opening and 4.13 inches of mounting-depth clearance. Its nominal basket diameter is 8.82 inches, so surrounding trim and grille clearance should also be checked before installation. It can be used as part of a larger system with compatible amplification and additional speakers selected for the desired overall frequency coverage.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch PRO Midrange:\u003c\/strong\u003e Provides an 8-inch driver format for vehicle audio upgrades requiring a larger midrange speaker location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoaxial Configuration:\u003c\/strong\u003e Consolidates the speaker assembly into a single mounting position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e800W Maximum Handling:\u003c\/strong\u003e Published maximum power-handling rating for system planning and amplifier selection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with audio equipment designed to drive a 4-ohm speaker load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e95dB Sensitivity:\u003c\/strong\u003e Published sensitivity specification for comparing this driver with compatible speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrugated Surround:\u003c\/strong\u003e Uses a corrugated surround with an oversize magnet motor structure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZP80 is built around a corrugated speaker surround, a 25-ounce magnet, and an oversize magnet motor structure. Its nominal basket diameter is 8.82 inches. The model is specified as an 8-inch PRO midrange coaxial car speaker.\u003c\/p\u003e\u003cp\u003eConfirm a 7.32-inch mounting diameter and at least 4.13 inches of mounting depth at the selected location before cutting or fastening anything. Match the speaker to a compatible 4-ohm amplifier channel or audio system, and use appropriate wiring and installation hardware for the vehicle. The published product information identifies one speaker; it does not confirm included grilles, mounting hardware, or wiring accessories.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":43915379900607,"sku":"704129655683","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/91ZJ8z_Qb3L.jpg?v=1734558722"},{"product_id":"gravity-1x-wz6g-warzone-series-6-5-inch-500-watts-maximum-power-handling-mid-range-coaxial-car-audio-loud-speaker-4-ohms-impedance-with-92db-sensitivity","title":"WARZONE WZ6G 6.5\" Pro Midrange Car Speaker","description":"\u003cp\u003eThe WARZONE WZ6G is a 6.5-inch pro midrange car speaker designed to replace or supplement factory speakers in an amplified vehicle-audio system. It focuses on the vocal and instrument range, helping bring more presence and definition to music than many basic factory speaker setups. Its 4-ohm impedance supports use with compatible car-audio amplification.\u003c\/p\u003e\u003cp\u003eThis speaker is intended for listeners building a louder, more direct midrange presentation in doors, kick panels, custom speaker pods, or similar vehicle locations. With a published 60 Hz to 8 kHz frequency response, it covers a broad portion of the midrange spectrum. It is a practical option for systems that use separate tweeters or subwoofers to cover frequencies outside its operating range.\u003c\/p\u003e\u003cp\u003eThe WZ6G is rated for 500 watts maximum peak power per speaker and uses a 30-ounce magnet. Its 92 dB sensitivity specification can help it produce useful output with appropriate amplifier power. As with any speaker upgrade, clean power and correct filtering are important for dependable performance.\u003c\/p\u003e\u003cp\u003eA corrugated speaker surround and oversized magnet motor structure are part of the WZ6G design. These construction details support the driver’s intended high-output midrange role while retaining a conventional 6.5-inch installation format. The published mounting measurements make it easier to compare the speaker against available space before installation.\u003c\/p\u003e\u003cp\u003eThe WZ6G works well as part of a component-style car-audio upgrade rather than as a complete full-range system on its own. Pair it with a suitable 4-ohm amplifier channel, proper crossover settings, and complementary tweeters or bass reinforcement as needed for the desired system balance. One WZ6G speaker is listed in the package contents.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Midrange Driver:\u003c\/strong\u003e Fits many common custom and replacement speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W Maximum Peak Handling:\u003c\/strong\u003e Supports use in amplified car-audio applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches many conventional car-audio amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92 dB Sensitivity:\u003c\/strong\u003e Helps support efficient output with compatible power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60 Hz–8 kHz Response:\u003c\/strong\u003e Covers a broad midrange frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-Ounce Magnet:\u003c\/strong\u003e Uses a substantial magnet motor structure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ6G uses a corrugated speaker surround and an oversized magnet motor structure. Its nominal basket diameter is 7.13 inches, while the listed mounting diameter is 5.71 inches. This design is intended for a pro-style midrange role in a vehicle-audio installation.\u003c\/p\u003e\u003cp\u003eConfirm that the mounting location provides at least 3.58 inches of depth and accepts the 5.71-inch mounting diameter before cutting or modifying panels. Wire the speaker to a compatible 4-ohm amplifier channel and use appropriate crossover settings for a midrange driver. The package listing identifies one WZ6G speaker; mounting hardware and other accessories are not documented.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":43915381866687,"sku":"0637740963861","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71InnucmarL.jpg?v=1735599519"},{"product_id":"gravity-1x-wz40twbk-1200-watts-maximum-power-handling-warzone-series-heavy-duty-titanium-super-tweeter-loud-speaker-4-ohms-black-frame-2nd-gen","title":"WARZONE WZ40TW-BK 1\" Titanium Super Bullet Tweeter","description":"\u003cp\u003eThe WARZONE WZ40TW-BK is a 1-inch super bullet tweeter designed to add dedicated high-frequency output to a car-audio system. It is intended for installations where stock speakers or midrange drivers do not provide enough upper-range detail and presence. The tweeter uses a 4-ohm design and is rated for up to 1200 watts maximum power handling per tweeter.\u003c\/p\u003e\u003cp\u003eThis model is suited to enthusiasts building or expanding a multi-speaker system with separate midrange and high-frequency drivers. Its super-tweeter format focuses on the upper frequencies that help vocals, percussion, and musical detail remain audible alongside bass-heavy playback. It can be used as part of an upgrade from factory speakers or alongside aftermarket pro-audio-style midrange drivers.\u003c\/p\u003e\u003cp\u003eThe WZ40TW-BK is described as producing a crisp and bright high-frequency character. Its bullet-style center dust cover is designed to protect the voice coil while supporting direct high-frequency projection. This presentation can help bring definition to systems that need more treble output.\u003c\/p\u003e\u003cp\u003eGravity's Warzone-series design uses an aluminum frame and aluminum diaphragm construction. Aluminum is specified for its light, rigid properties in high-frequency reproduction. A built-in capacitor filter is included to limit unwanted lower-frequency content reaching the tweeter.\u003c\/p\u003e\u003cp\u003eThe WZ40TW-BK has a nominal 4-ohm impedance, while product information also states it can be used with 8-ohm systems. It is a wired car-audio speaker component rather than a standalone powered speaker. Pair it with correctly configured amplification, suitable crossover strategy, and compatible midrange or full-range speakers for a balanced system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Super Bullet Format:\u003c\/strong\u003e Compact high-frequency driver for dedicated treble reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1200W Maximum Rating:\u003c\/strong\u003e Specified maximum power handling per tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Designed for common car-audio amplifier configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Capacitor Filter:\u003c\/strong\u003e Helps reduce lower-frequency content sent to the tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Frame And Diaphragm:\u003c\/strong\u003e Lightweight, rigid materials for high-frequency operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBullet Dust Cover:\u003c\/strong\u003e Protects the voice-coil area in the tweeter assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ40TW-BK uses a black Warzone-series super-bullet form factor with an aluminum frame and diaphragm. Its 1-inch driver format and bullet dust cover give it the compact, forward-projecting profile commonly used in custom car-audio speaker panels. The listed mounting depth is 3.58 inches, so verify available clearance before selecting a mounting location.\u003c\/p\u003e\u003cp\u003eInstall the tweeter in a secure location aimed appropriately for the vehicle's layout, such as a custom door panel, dash panel, kick panel, or rear deck application where space permits. Wire it as a passive high-frequency component and retain the built-in capacitor filter; no numeric crossover point is confirmed in available product information. Confirm amplifier stability, polarity, mounting clearance, and the quantity included with the specific listing before installation.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":43915385864383,"sku":"850048061064","price":14.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/pixelcut-export_3ef56ae7-65ee-4aa2-9c71-d1f0ea98bea7.png?v=1735681153"},{"product_id":"1x-gravity-wz50tw-1500w-heavy-duty-titanium-super-tweeter-loud-speaker-4-ohms-for-car-van-atv-motorcycle-and-competition-black","title":"WARZONE WZ50TW 1\" Titanium Super Bullet Tweeter","description":"\u003cp\u003eThe WARZONE WZ50TW is a 1-inch super bullet tweeter designed to add focused high-frequency output to a vehicle audio system. It is intended for listeners who want more presence and detail from cymbals, vocals, synthesizers, and other upper-frequency content. Its compact format makes it a practical addition to custom car, van, ATV, and motorcycle audio installations.\u003c\/p\u003e\u003cp\u003eThis is a 4-ohm high-frequency driver with a published 1,500-watt maximum power rating and a listed 750-watt RMS rating. The WZ50TW is made for systems where a dedicated tweeter is needed to complement midrange speakers, full-range speakers, or high-output bass systems. Its super bullet profile helps project upper frequencies clearly in louder environments.\u003c\/p\u003e\u003cp\u003eA built-in capacitor filter is included to limit low-frequency content reaching the tweeter. This simplifies integration compared with a driver that has no included high-pass protection, though proper system setup and gain matching remain important. The published design is also described as usable with 8-ohm systems.\u003c\/p\u003e\u003cp\u003eThe WZ50TW is identified as a titanium super tweeter and uses an aluminum frame and diaphragm in published product descriptions. The rigid metal construction is intended to support a crisp, direct high-frequency character. A bullet-shaped dust cover protects the voice-coil area and is part of the driver’s distinctive super bullet design.\u003c\/p\u003e\u003cp\u003eFor an upgrade path, the WZ50TW works best as part of a properly crossed-over multi-speaker system rather than as a replacement for a full-range speaker. It can be used in front-stage, rear-fill, outdoor-power-sports, or custom high-output installations where additional treble output is desired. Select amplification and system tuning carefully to suit the tweeter’s 4-ohm load and high-frequency role.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Super Bullet Format:\u003c\/strong\u003e Compact dedicated tweeter design for high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,500W Maximum Power:\u003c\/strong\u003e Published peak-handling rating for high-output audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches many common car-audio amplifier configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Capacitor Filter:\u003c\/strong\u003e Helps block lower frequencies from the tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Frame And Diaphragm:\u003c\/strong\u003e Published metal construction supports a direct, crisp presentation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBullet Dust Cover:\u003c\/strong\u003e Protects the voice-coil area within the super tweeter assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ50TW uses a heavy-duty super bullet layout with a published aluminum frame and diaphragm, plus a protective bullet dust cover. It is sold as a titanium super tweeter in product identification, while product descriptions also specify the aluminum construction. The listed mounting depth is 3.58 inches, so verify available space before choosing a mounting location.\u003c\/p\u003e\u003cp\u003eWire the WZ50TW with correct polarity and use its built-in capacitor filter as supplied. Install it only in a system configured for dedicated high-frequency drivers, and set amplifier gain conservatively to avoid overpowering the tweeter. Confirm the final impedance of the complete speaker arrangement before connecting it to an amplifier.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":43915397955775,"sku":"7789591816626","price":22.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/pixelcut-export_373dc0a3-d72d-4473-981c-284222dde3bb.png?v=1736892185"},{"product_id":"warzone-wz20tw-2-88-inch-super-tweeter-speaker-4-ohm-500w-max-power-105db-sensitivity-titanium-diaphragm-ccaw-voice-coil-for-pro-car-audio","title":"Warzone WZ20TW 2.88\" Super Tweeter Speakers (Pair)","description":"\u003cp\u003eThe Warzone WZ20TW is a pair of compact 2.88-inch super tweeters intended to add high-frequency detail to a car-audio speaker system. They are designed for installations where larger speakers handle midrange and bass while dedicated tweeters reproduce upper-frequency content. Each tweeter has a 4-ohm nominal impedance for use with compatible car-audio amplification.\u003c\/p\u003e\u003cp\u003eThis pair is rated for up to 1,000 watts total maximum power, or 500 watts maximum per tweeter. A 105 dB sensitivity rating indicates that the tweeters are designed for efficient output when correctly integrated into an audio system. Their stated 2.5 kHz to 20 kHz frequency range focuses on the upper portion of the audible spectrum.\u003c\/p\u003e\u003cp\u003eA titanium diaphragm is used for the high-frequency radiating surface, while the voice coil uses CCAW construction. These materials are specified for the WZ20TW and form the core of its compact super-tweeter design. The result is a purpose-built driver for adding treble presence rather than replacing a full-range speaker.\u003c\/p\u003e\u003cp\u003eThe WZ20TW uses a compact 25 mm x 5 mm magnet, also listed as 0.98 x 0.20 inches. This small magnet assembly can be useful where mounting space is limited. The speakers are wired, passive drivers and need an appropriate audio signal and system configuration.\u003c\/p\u003e\u003cp\u003eUse the WZ20TW pair as part of a properly balanced multi-speaker car-audio system. Match the system to the 4-ohm impedance and use suitable high-frequency filtering or crossover settings for tweeter operation. Because these are dedicated tweeters, they are most appropriate alongside midrange, coaxial, or component speakers that cover lower frequencies.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.88-Inch Super Tweeters:\u003c\/strong\u003e Compact drivers dedicated to high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair Configuration:\u003c\/strong\u003e Includes two WZ20TW tweeters for stereo installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches many compatible car-audio amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e105 dB Sensitivity:\u003c\/strong\u003e Supports efficient output from a compatible system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium Diaphragms:\u003c\/strong\u003e Specified diaphragm material for high-frequency operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coils:\u003c\/strong\u003e Uses copper-clad aluminum wire voice-coil construction.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ20TW is a wired, passive dynamic tweeter with a titanium diaphragm, CCAW voice coil, and compact 25 mm x 5 mm magnet. Its 2.88-inch size supports placement in compact custom panels or other appropriate tweeter locations. The pair is intended for car-audio use and is listed with car mounting.\u003c\/p\u003e\u003cp\u003eConfirm that the amplifier or crossover can work with a 4-ohm tweeter load before wiring. Install the pair as high-frequency drivers in a balanced system, using appropriate crossover protection rather than sending low-frequency bass content to the tweeters. Mounting hardware, crossover components, and wiring details are not confirmed in the available product information, so verify package contents and installation needs before purchase.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":43915451072703,"sku":"783501154464","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/pixelcut-export_1_aec8b97f-594b-4014-b422-8599e1438af1.png?v=1734563962"},{"product_id":"warzone-wz25tw-2-93-inch-super-tweeter-speaker-4-ohm-550w-max-power-106db-sensitivity-titanium-diaphragm-ccaw-voice-coil-for-pro-car-audio","title":"Warzone WZ25TW 2.93\" Super Tweeter Speakers","description":"\u003cp\u003eThe Warzone WZ25TW is a pair of 2.93-inch super tweeters designed to add dedicated high-frequency output to a car-audio system. They are intended for listeners building or upgrading a system that needs clearer upper-frequency detail beyond what larger speakers may reproduce. Each tweeter uses a 4-ohm nominal impedance for compatibility with appropriately matched car-audio amplification.\u003c\/p\u003e\u003cp\u003eThis pair is suited to custom car-audio installations where separate tweeters are being added to complement midrange speakers, coaxials, or a broader multi-speaker setup. The WZ25TW has a stated 3 kHz to 20 kHz frequency range, covering the upper part of the audible spectrum. Its 106 dB sensitivity rating indicates it is designed for efficient output when correctly integrated into a system.\u003c\/p\u003e\u003cp\u003eWarzone specifies up to 550 watts maximum power per tweeter, or 1100 watts total maximum power for the pair. Maximum power is not an RMS rating, so amplifier selection should be based on careful system matching rather than the maximum figure alone. Proper gain setting is important when adding high-sensitivity tweeters to an existing system.\u003c\/p\u003e\u003cp\u003eA titanium diaphragm is used for the sound-producing element, while the voice coil is specified as CCAW. This material combination is intended for a compact tweeter design focused on high-frequency reproduction. The compact magnet is listed at 0.98 inches by 0.28 inches.\u003c\/p\u003e\u003cp\u003eThe WZ25TW is a wired, car-mount tweeter pair that can be used as part of a vehicle audio upgrade. Its compact 2.93-inch format can suit installations with limited space, subject to confirming the available mounting location. For a balanced result, pair it with compatible speakers, amplification, and frequency filtering appropriate for a tweeter.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.93-Inch Super Tweeters:\u003c\/strong\u003e Compact dedicated tweeters for high-frequency system support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches compatible 4-ohm car-audio amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e106 dB Sensitivity:\u003c\/strong\u003e Supports efficient output in a properly matched system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium Diaphragm:\u003c\/strong\u003e Provides the specified diaphragm material for treble reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Uses a CCAW voice-coil construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e550W Maximum Each:\u003c\/strong\u003e Rated at 1100W total maximum power per pair.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ25TW uses a compact 2.93-inch tweeter layout with a titanium diaphragm and CCAW voice coil. Its magnet dimensions are listed as 0.98 inches by 0.28 inches. The pair is designed for wired connection and car mounting.\u003c\/p\u003e\u003cp\u003eConfirm that the intended mounting location accommodates the tweeter and its mounting tabs before installation. Connect each tweeter only to a compatible 4-ohm audio channel or system configuration, and use appropriate high-frequency filtering for tweeter operation. Set amplifier gain conservatively and integrate the pair with the rest of the system to maintain balanced output.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":43919131181247,"sku":"783501154471","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/pixelcut-export_23a9c81b-091f-453c-ad48-cd9248ce4c57.png?v=1734640049"},{"product_id":"warzone-wz30tw-2-94-inch-super-tweeter-speaker-4-ohm-650w-max-power-103db-sensitivity-titanium-diaphragm-ccaw-voice-coil-for-pro-car-audio","title":"WARZONE WZ30TW 2.94-Inch Super Tweeter Speakers","description":"\u003cp\u003eThe WARZONE WZ30TW is a 2.94-inch super tweeter pair intended to add high-frequency detail to a pro car-audio speaker system. It is designed for systems that need dedicated treble reproduction beyond what larger midrange or midbass drivers typically provide. Each tweeter has a 4-ohm nominal impedance for use with compatible passive car-audio amplification.\u003c\/p\u003e\u003cp\u003eThis pair is suited to installers and enthusiasts building multi-driver systems where clear upper-frequency output is a priority. Its specified 103 dB sensitivity indicates efficient output relative to input power. The stated 3 kHz to 20 kHz frequency range focuses the WZ30TW on the upper midrange and treble region.\u003c\/p\u003e\u003cp\u003eThe WZ30TW uses a titanium diaphragm and a CCAW voice coil. These are the listed core components responsible for producing its high-frequency output. The compact 2.94-inch format helps it fit where a larger horn or compression-style driver may not be practical.\u003c\/p\u003e\u003cp\u003ePower handling is listed as 650 watts maximum per tweeter, or 1,300 watts total maximum for the pair. This is a maximum-power figure rather than a confirmed RMS rating, so amplifier selection should not be based on an assumed RMS specification. Proper level setting and high-pass filtering are important when integrating any dedicated tweeter into a system.\u003c\/p\u003e\u003cp\u003eFor a complete upgrade, the WZ30TW pair can be combined with compatible midrange speakers, amplification, and an appropriately designed crossover network. Its 4-ohm nominal impedance should be considered when planning channel loading and wiring. The listed magnet dimensions of 0.98 by 0.28 inch support compact placement options, subject to verifying the available mounting space in the vehicle.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.94-Inch Super Tweeters:\u003c\/strong\u003e Compact dedicated drivers for high-frequency system reinforcement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Nominal Impedance:\u003c\/strong\u003e Matches amplifiers and crossover networks designed for 4-ohm loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e103 dB Sensitivity:\u003c\/strong\u003e Supports efficient output in compatible car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium Diaphragms:\u003c\/strong\u003e Listed diaphragm material for high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coils:\u003c\/strong\u003e Uses copper-clad aluminum wire voice-coil construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair Power Rating:\u003c\/strong\u003e Rated at 1,300 watts total maximum for two tweeters.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ30TW is built around a titanium diaphragm and CCAW voice coil in a compact super-tweeter format. Its listed magnet measures 0.98 inch by 0.28 inch. The pair is intended for car-audio use and is specified with a 4-ohm nominal impedance.\u003c\/p\u003e\u003cp\u003eUse the pair with a compatible 4-ohm-capable amplifier channel arrangement and an appropriately designed high-pass crossover or filter. Mount only after confirming available space and routing speaker wiring securely. Because no RMS rating, mounting cutout, mounting depth, crossover component, or hardware list is confirmed, verify those details before final installation.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":43919212871871,"sku":"0783501154488","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/pixelcut-export_354f0936-371c-49b5-9c34-8f57dcef528b.png?v=1734641270"},{"product_id":"warzone-wz35tw-3-8-inch-super-tweeter-speaker-4-ohm-850w-max-power-104db-sensitivity-pen-diaphragm-aluminum-voice-coil-for-pro-car-audio","title":"Warzone WZ35TW 3.8\" Super Tweeter Speakers","description":"\u003cp\u003eThe Warzone WZ35TW is a pair of 3.8-inch super tweeters intended for adding high-frequency output to a pro car-audio system. Each tweeter has a 4-ohm nominal impedance and is specified for up to 850 watts maximum power. Together, the pair is rated at 1700 watts total maximum power.\u003c\/p\u003e\u003cp\u003eThis set is suited to installers and listeners building systems that need dedicated high-frequency reproduction. Its published 1.5 kHz to 20 kHz frequency range focuses on upper-midrange and treble content rather than bass duties. The 104 dB sensitivity rating indicates an efficient design intended to deliver strong output from the available amplifier power.\u003c\/p\u003e\u003cp\u003eThe WZ35TW uses a PEN diaphragm and an aluminum round-wire voice coil. These specified materials form the moving assembly responsible for reproducing the speaker's high-frequency range. A 13-ounce magnet is specified for each tweeter design.\u003c\/p\u003e\u003cp\u003eFor a system upgrade, these super tweeters can complement woofers, midrange speakers, or other drivers that handle lower frequencies. Their 4-ohm nominal impedance should be matched to an amplifier and crossover arrangement designed for that load. Proper frequency filtering is important when integrating high-frequency drivers into a multi-speaker system.\u003c\/p\u003e\u003cp\u003eThe package is sold as a pair, making it appropriate for left- and right-channel placement in a vehicle. Before installation, confirm available mounting space because published cutout, mounting-depth, and terminal details were not confirmed. Configure the system carefully to stay within the published maximum-power specification.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.8-Inch Format:\u003c\/strong\u003e Compact super-tweeter size for dedicated high-frequency system coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair Configuration:\u003c\/strong\u003e Includes two WZ35TW super tweeters for stereo installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches amplifiers and crossover networks designed for 4-ohm drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e850W Maximum Power:\u003c\/strong\u003e Each tweeter is rated for up to 850 watts maximum.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e104 dB Sensitivity:\u003c\/strong\u003e Efficient output specification for high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEN And Aluminum Construction:\u003c\/strong\u003e PEN diaphragm and aluminum round-wire voice coil materials.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ35TW combines a PEN diaphragm with an aluminum round-wire voice coil and a 13-ounce magnet. These are the published construction details for this 3.8-inch, 4-ohm super tweeter. Its specified operating range extends from 1.5 kHz to 20 kHz.\u003c\/p\u003e\u003cp\u003eInstall the pair as left- and right-channel high-frequency drivers in a compatible car-audio system. Use amplification and crossover filtering appropriate for 4-ohm tweeters, and avoid assigning bass reproduction to these drivers. Verify physical mounting dimensions, wiring requirements, and included mounting hardware with the seller before beginning installation, as those details were not confirmed.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":43919364653247,"sku":"783501154495","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/pixelcut-export_1_d86a6221-2d1e-48a9-9129-650151b38148.png?v=1734641767"},{"product_id":"warzone-wz37tw-3-71-inch-super-tweeter-speaker-4-ohm-1000w-max-power-105db-sensitivity-titanium-diaphragm-ccaw-voice-coil-for-pro-car-audio","title":"WARZONE WZ37TW 3.71\" Super Tweeter Speakers","description":"\u003cp\u003eThe WARZONE WZ37TW is a pair of 3.71-inch super tweeters intended to add high-frequency output to a pro car-audio system. It is designed for listeners building a more detailed top end than typical full-range speakers alone can provide. Each tweeter uses a 4-ohm nominal impedance for integration with compatible car-audio amplification.\u003c\/p\u003e\u003cp\u003eThis model is specified with up to 1,000 watts maximum power per tweeter, or 2,000 watts total maximum power for the pair. Its 105 dB sensitivity rating indicates efficient output from relatively modest amplifier power. The stated 2 kHz to 20 kHz frequency range focuses the WZ37TW on upper-midrange and treble reproduction.\u003c\/p\u003e\u003cp\u003eA titanium diaphragm is used for the moving high-frequency element. The voice coil is made from CCAW, or copper-clad aluminum wire. These materials are specified as part of the tweeter's sound-reproduction and durability design.\u003c\/p\u003e\u003cp\u003eThe WZ37TW is suited to custom systems that use dedicated midrange, midbass, or full-range speakers below it. It can be used as part of a multi-way front stage, door-panel build, dash installation, or other car-audio layout where high-frequency coverage is needed. Proper system tuning is important so the tweeters are operated only within an appropriate frequency range.\u003c\/p\u003e\u003cp\u003eSold as a pair, these super tweeters provide matched left- and right-channel components for a stereo installation. Their compact 3.71-inch size supports installations where space is limited. Verify available mounting space, amplifier compatibility, and crossover configuration before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair of Super Tweeters:\u003c\/strong\u003e Includes two matching WZ37TW high-frequency speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.71-Inch Size:\u003c\/strong\u003e Compact format for custom car-audio speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches compatible 4-ohm amplifier channels and crossover networks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e105 dB Sensitivity:\u003c\/strong\u003e Supports efficient high-frequency output in a properly matched system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium Diaphragm:\u003c\/strong\u003e Provides the specified diaphragm material for treble reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Uses copper-clad aluminum wire in the voice-coil construction.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ37TW combines a titanium diaphragm with a CCAW voice coil in a compact super-tweeter assembly. It is specified with a 3.71-inch speaker size, and the listed magnet dimensions are 1.30 x 0.39 x 0.28 inches. The design is intended for pro car-audio applications requiring dedicated high-frequency drivers.\u003c\/p\u003e\u003cp\u003eInstall the pair in matched left- and right-channel locations with adequate clearance and secure mounting hardware appropriate to the vehicle or enclosure. Use a compatible amplifier and configure a suitable high-pass crossover so low-frequency content is not sent to the tweeters. Confirm polarity, impedance load, available space, and wiring requirements before final assembly.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":43919414132927,"sku":"0783501154501","price":18.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/pixelcut-export_740e7dac-7a7f-426d-a66d-b223a5f7719d.png?v=1734642547"},{"product_id":"warzone-wz45tw-1-7-inch-super-tweeter-speaker-4-ohm-1500w-max-power-106db-sensitivity-titanium-diaphragm-ccaw-voice-coil-for-pro-car-audio","title":"Warzone WZ45TW 1.7\" Super Tweeter Speakers (Pair)","description":"\u003cp\u003eThe Warzone WZ45TW is a pair of 1.7-inch super tweeters designed to add dedicated high-frequency output to a car-audio system. Their listed 3 kHz to 20 kHz frequency range targets the upper portion of the audible spectrum rather than bass reproduction. This makes them suited to systems that need additional treble detail alongside compatible midrange, midbass, or subwoofer components.\u003c\/p\u003e\u003cp\u003eEach WZ45TW is specified at 4 ohms and carries a listed maximum\/peak power rating of 1500 watts. The pair is marketed with a combined 3000-watt total maximum power figure. A 106 dB sensitivity rating is also listed for efficient high-frequency output when the speakers are properly matched to the rest of the system.\u003c\/p\u003e\u003cp\u003eA titanium diaphragm is used for the moving high-frequency element, while the voice coil uses CCAW construction. The listed voice-coil diameter is 25.4 mm. This combination is intended for the quick, focused response expected from a dedicated super tweeter.\u003c\/p\u003e\u003cp\u003eThe WZ45TW uses a ferrite magnet structure with a listed magnet size of 25 mm by 7 mm. Its compact driver format can be useful where space for larger high-frequency components is limited. The listing identifies the design as a super bullet tweeter, providing a concentrated form factor for custom car-audio installations.\u003c\/p\u003e\u003cp\u003eThis package includes two WZ45TW tweeters and is intended for pro car-audio applications. Listing imagery identifies a crossover component as included, with a 2.2 µF, 250 V capacitor shown. For a balanced result, integrate the pair with appropriate system filtering, amplifier setup, and speakers that cover the lower frequency ranges.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.7-Inch Super Tweeters:\u003c\/strong\u003e Compact dedicated drivers for adding upper-frequency output to a car-audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Nominal Impedance:\u003c\/strong\u003e Designed for use with compatible 4-ohm-capable amplification and crossover arrangements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1500W Maximum Per Tweeter:\u003c\/strong\u003e Each tweeter carries a listed 1500-watt maximum\/peak power figure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e106 dB Sensitivity:\u003c\/strong\u003e The listed sensitivity supports strong output from a compact high-frequency driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium Diaphragm:\u003c\/strong\u003e A titanium diaphragm is specified for high-frequency sound reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Crossover Component:\u003c\/strong\u003e The package imagery identifies an included crossover capacitor for filtering unwanted frequencies.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ45TW combines a titanium diaphragm, CCAW voice coil, and ferrite magnet motor structure. Its 25.4 mm voice coil and 25 mm by 7 mm magnet are listed specifications. The bullet-style housing is compact and purpose-built for dedicated high-frequency placement.\u003c\/p\u003e\u003cp\u003eConfirm available mounting clearance before installation, as the manufacturer does not provide confirmed cutout-diameter or mounting-depth data. Wire each tweeter only in a system configured for its 4-ohm nominal impedance, and use suitable filtering for its stated 3 kHz to 20 kHz operating range. The included crossover component should be installed according to the system plan and verified before applying power.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":43919504867519,"sku":"0783501154518","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/pixelcut-export_76d6dc45-9ebb-4e44-8a6d-f8cfe535052b.png?v=1734643101"},{"product_id":"warzone-wz60tw-4-02-inch-super-tweeter-speaker-4-ohm-1600w-max-power-105db-sensitivity-titanium-diaphragm-ccaw-voice-coil-for-pro-car-audio","title":"Warzone WZ60TW 4.02\" Super Tweeter","description":"\u003cp\u003eThe Warzone WZ60TW is a 4.02-inch super tweeter designed to add high-frequency output to a car-audio system. It is intended for systems that need dedicated treble reproduction above the range typically handled by larger midrange speakers or subwoofers. With a 4-ohm nominal impedance, it is suited to compatible car-audio amplification and speaker configurations.\u003c\/p\u003e\u003cp\u003eThis model is rated for up to 1600 watts maximum power and has a listed sensitivity of 105 dB. Its specified 2 kHz to 20 kHz frequency range focuses on upper-midrange and high-frequency detail. That makes it appropriate for listeners building a multi-speaker system with separate drivers for bass, midrange, and treble.\u003c\/p\u003e\u003cp\u003eA titanium diaphragm is used for the sound-producing element, while the voice coil uses CCAW construction. These materials are specified as part of the WZ60TW's driver design. The tweeter also uses a 12.3-ounce magnet assembly.\u003c\/p\u003e\u003cp\u003eThe WZ60TW is a purpose-built car-audio tweeter rather than a full-range replacement speaker. It can be used in custom speaker panels, door builds, dash installations, or other vehicle-specific locations where its physical fit and aiming can be planned. Its 4.02-inch stated size should be checked against the available mounting area before installation.\u003c\/p\u003e\u003cp\u003eFor a balanced system, pair the WZ60TW with compatible midrange speakers and bass speakers that cover frequencies below its operating range. Use appropriate filtering and amplification matched to the system design, and follow the amplifier or crossover manufacturer's wiring guidance. Exact mounting depth, cutout dimensions, RMS power handling, and included-installation hardware are not specified in the confirmed product information.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.02-Inch Super Tweeter:\u003c\/strong\u003e Adds dedicated high-frequency reproduction to a car-audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Supports use with compatible 4-ohm speaker channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1600W Maximum Power:\u003c\/strong\u003e Listed maximum-power capacity for the individual tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e105 dB Sensitivity:\u003c\/strong\u003e Indicates high output efficiency from the driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium Diaphragm:\u003c\/strong\u003e Forms the specified high-frequency driver diaphragm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Uses copper-clad aluminum wire in the voice coil.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ60TW combines a titanium diaphragm, CCAW voice coil, and 12.3-ounce magnet assembly in a compact super-tweeter format. Its published 4.02-inch size is useful for planning a custom installation, but the manufacturer information confirmed for this model does not state a mounting cutout or mounting depth. Measure the intended mounting location and confirm clearance before cutting or fabricating a panel.\u003c\/p\u003e\u003cp\u003eConnect the WZ60TW only to a compatible car-audio setup and use a properly configured high-pass crossover or equivalent system filtering to keep lower frequencies out of the tweeter's operating range. Match amplifier configuration to the 4-ohm nominal impedance and avoid treating the 1600-watt maximum rating as an RMS rating. Installation accessories, wiring, crossover components, and mounting hardware should be confirmed with the seller or installer because they are not identified in the confirmed product details.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":43919580561599,"sku":"783501154525","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/pixelcut-export_1_5b08a7b0-ae7e-4b84-bd6f-252ff57291b3.png?v=1734643595"},{"product_id":"warzone-wz80tw-4-81-inch-super-tweeter-speaker-4-ohm-1800w-max-power-103db-sensitivity-titanium-diaphragm-ccaw-voice-coil-for-pro-car-audio","title":"Warzone WZ80TW 4.81-Inch Super Tweeter","description":"\u003cp\u003eThe Warzone WZ80TW is a 4.81-inch super tweeter designed to add dedicated high-frequency output to a car-audio system. It is suited to listeners building or upgrading systems that need more presence and detail in the upper-frequency range. With a 4-ohm nominal impedance, it is intended for use in compatible wired car-audio installations.\u003c\/p\u003e\u003cp\u003eThis tweeter is specified with a 103 dB sensitivity rating, allowing it to produce substantial output from relatively modest amplifier power. Its character is aimed at clear, forward high-frequency reproduction for systems where larger midrange drivers, subwoofers, or full-range speakers need added treble support. It is a focused high-frequency driver rather than a replacement for a complete speaker system.\u003c\/p\u003e\u003cp\u003eThe WZ80TW carries a stated maximum power rating of 1800 watts. Because no RMS power specification is published, amplifier selection should be based on careful system tuning rather than the maximum rating alone. Proper level matching helps keep the tweeter balanced with the rest of the system.\u003c\/p\u003e\u003cp\u003eA titanium diaphragm is used for the sound-producing element, while the voice coil uses CCAW construction. These materials are specified as part of the driver design and support the tweeter's intended high-frequency role. The listed 20.3-ounce magnet adds substantial motor assembly mass for a compact super-tweeter format.\u003c\/p\u003e\u003cp\u003eThe WZ80TW can be used as part of a custom car-audio upgrade where dedicated high-frequency drivers are desired. Pair it with appropriately selected midrange, midbass, or subwoofer components to cover the rest of the audible range. A suitable high-pass crossover or other system filtering should be used to protect a tweeter during installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.81-Inch Format:\u003c\/strong\u003e Compact super-tweeter size for custom car-audio installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Designed for compatible 4-ohm speaker amplification systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1800W Maximum Rating:\u003c\/strong\u003e Published maximum-power specification for system planning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e103 dB Sensitivity:\u003c\/strong\u003e High sensitivity supports strong high-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium Diaphragm:\u003c\/strong\u003e Purpose-built diaphragm material for tweeter reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Copper-clad aluminum wire voice-coil construction.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ80TW uses a titanium diaphragm, CCAW voice coil, and a listed 20.3-ounce magnet. Its 4.81-inch speaker size makes it a dedicated high-frequency component for installations that use separate drivers instead of relying on a single full-range speaker. The published retail package measures 6.0 x 5.0 x 4.0 inches.\u003c\/p\u003e\u003cp\u003eInstall the tweeter in a location that supports clear forward sound while keeping it safely secured. Connect it through a compatible wired 4-ohm car-audio system and use appropriate high-pass filtering or crossover protection; crossover specifications are not published for this model. Confirm the available mounting space before purchase, as cutout diameter and mounting depth are not published.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":43919636529343,"sku":"0783501154532","price":26.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/pixelcut-export_1_08965c32-6382-4a7a-9a50-684098aeae5d.png?v=1736892838"},{"product_id":"stxaudio-stx-700tw-4-03-inch-super-tweeter-speaker-4-ohm-1500w-max-power-105db-sensitivity-titanium-diaphragm-ccaw-voice-coil-for-pro-car-audio","title":"STX Audio STX-700TW 4.03\" Super Tweeter","description":"\u003cp\u003eThe STX Audio STX-700TW is a 4.03-inch super tweeter designed to add upper-frequency output to a car-audio speaker system. It is intended for listeners building systems that need dedicated high-frequency reproduction beyond what larger midrange or full-range drivers typically provide. Its published frequency response spans 2 kHz to 20 kHz.\u003c\/p\u003e\u003cp\u003eThis is a 4-ohm, wired tweeter with a published maximum power rating of 1,500 watts and a sensitivity rating of 105 dB. Those specifications position it for high-output vehicle-audio applications where efficient high-frequency output is important. An RMS power rating is not published in the available product information.\u003c\/p\u003e\u003cp\u003eThe STX-700TW uses a titanium diaphragm and a CCAW voice coil. Titanium is the stated diaphragm material, while the copper-clad aluminum wire voice coil is specified as part of the driver construction. The listed magnet weight is 12.3 ounces.\u003c\/p\u003e\u003cp\u003eAs a dedicated super tweeter, the STX-700TW is suited to complementing compatible midrange speakers, woofers, or subwoofers in a multi-driver system. Its 2 kHz to 20 kHz stated operating range focuses on the upper portion of the audible spectrum rather than bass reproduction. The 105 dB sensitivity specification indicates an efficient driver relative to the input signal.\u003c\/p\u003e\u003cp\u003eThe available product data identifies this as a single 4.03-inch driver for car-audio use. It can be considered for custom door-panel, dash, pillar, or enclosure applications only after confirming the actual mounting surface and clearances. Published information does not provide vehicle-specific fitment, cutout diameter, mounting depth, RMS power handling, or crossover details.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.03-Inch Super Tweeter:\u003c\/strong\u003e Adds a dedicated high-frequency driver to a multi-speaker car-audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 kHz–20 kHz Response:\u003c\/strong\u003e Covers the published upper-frequency operating range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Supports use with compatible 4-ohm speaker channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e105 dB Sensitivity:\u003c\/strong\u003e Indicates efficient output from the driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium Diaphragm:\u003c\/strong\u003e Uses titanium as the stated diaphragm material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Uses a copper-clad aluminum wire voice coil.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe STX-700TW combines a titanium diaphragm, CCAW voice coil, and a listed 12.3-ounce magnet assembly. It is a compact, wired dynamic-driver tweeter intended for car-audio systems. The published unit size is 4.03 inches, or approximately 10.2 cm.\u003c\/p\u003e\u003cp\u003eMatch the tweeter to a compatible 4-ohm channel and configure the system so it receives the appropriate high-frequency signal. Confirm mounting depth, cutout requirements, terminal access, protection method, and supplied hardware before installation, as these details are not published in the available specifications. A crossover is not listed as included, so verify all required signal-management components for the planned system.\u003c\/p\u003e","brand":"STX AUDIO","offers":[{"title":"Default Title","offer_id":44163207758015,"sku":"783501154457","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/pixelcut-export_3_4eb93f0b-8940-481d-b1e8-b80e7b7a4e62.jpg?v=1760384087"},{"product_id":"warzone-wz65ps-6-5-inch-mid-range-driver-speaker-1000w-max-4-ohms-20oz-magnet-aluminum-dome-tweeter-and-steel-basket-for-car-audio-2-speakers","title":"Warzone WZ65PS 6.5\" Mid-Range Speakers with Dome Tweeters","description":"\u003cp\u003eThe Warzone WZ65PS is a 6.5-inch car-audio speaker set designed to add strong midrange output and extended high-frequency detail to an upgraded vehicle sound system. Each set combines a mid-range driver with a dome tweeter, helping cover the vocal, instrument, and upper-frequency range that factory speakers may reproduce less clearly. It is intended for car-audio enthusiasts replacing worn speakers or building a more dedicated amplified system.\u003c\/p\u003e\u003cp\u003eWith a stated 4-ohm impedance, the WZ65PS is suited to common car-audio amplifier configurations. Its published power handling is 320 watts rated and 1000 watts maximum, so amplifier matching should be based on the rated-power specification rather than the peak figure. The stated 90 dB sensitivity supports efficient output when installed and tuned appropriately.\u003c\/p\u003e\u003cp\u003eThe speaker uses a black foaming paper cone with a cloth edge to reproduce the midrange portion of the music spectrum. Its stated frequency response is 100 Hz to 20 kHz, covering midbass through treble rather than the lowest sub-bass frequencies. For full-range systems, it can be paired with a subwoofer and suitable crossover settings for lower bass duties.\u003c\/p\u003e\u003cp\u003eA 20-ounce strontium magnet and 1.5-inch voice coil support the mid-range driver's motor and thermal structure. The integrated 50 mm aluminum dome tweeter uses a neodymium magnet and is intended to add high-frequency definition. Together, these elements create a speaker format aimed at systems that need both vocal presence and treble coverage from a 6.5-inch mounting location.\u003c\/p\u003e\u003cp\u003eThe WZ65PS has a red steel basket intended to provide a rigid mounting structure in a car-audio installation. It is sold as a two-speaker set, making it suitable for a left\/right front-stage or rear-fill upgrade where vehicle fitment permits. Confirm available mounting depth, mounting-hole pattern, wiring, amplifier output, and crossover strategy before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Speaker Format:\u003c\/strong\u003e Fits applications designed for 6.5-inch car-audio speakers, subject to vehicle-specific fitment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e320W Rated Power:\u003c\/strong\u003e Provides a meaningful rating for matching an external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with many conventional car-audio amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 Hz-20 kHz Response:\u003c\/strong\u003e Covers midrange and treble frequencies for system upgrades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Dome Tweeter:\u003c\/strong\u003e Adds dedicated high-frequency reproduction to the speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel Basket Construction:\u003c\/strong\u003e Supplies a durable mounting frame for vehicle installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ65PS combines a red steel basket, black foaming paper cone, cloth edge, 20-ounce strontium magnet, and a 1.5-inch voice coil. A 50 mm aluminum dome tweeter with a neodymium magnet is incorporated for high-frequency output. These materials and components are specified for a durable car-audio speaker assembly with separate midrange and treble elements.\u003c\/p\u003e\u003cp\u003eUse the WZ65PS only where a 6.5-inch speaker can be securely mounted and where clearance is confirmed before cutting or drilling. Match the speakers to an amplifier compatible with a 4-ohm load, and use appropriate filtering to protect them from bass below their stated response range. The package is listed as containing two speakers; vehicle-specific mounting adapters, wiring, grilles, amplifiers, and crossovers should be confirmed separately before purchase.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":44329022324927,"sku":"B0DT7T2DP2","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81eTeciP0rL.jpg?v=1749682715"},{"product_id":"warzone-wz652mtg-6-5-inch-marine-box-speaker-with-rgb-led-lighting-700w-max-4-ohms-gray-injection-cone-with-rubber-edge-and-neodymium-magnet-2-speakers","title":"Warzone WZ652MTG 6.5\" Marine Box Speakers with RGB","description":"\u003cp\u003eThe Warzone WZ652MTG is a pair of 6.5-inch marine box speakers designed for audio systems used around boats, patios, RVs, and other outdoor-oriented installations. Each set combines full-range speaker playback with integrated RGB LED illumination for systems where sound and visual presentation both matter. The speakers use a 4-ohm design for compatibility with appropriately matched car or marine audio amplification.\u003c\/p\u003e\u003cp\u003eWith a listed 700-watt maximum power rating and 300-watt rated power rating, the WZ652MTG is intended for systems that need substantial output from compact 6.5-inch speakers. Its published 50 Hz to 20 kHz frequency response covers bass, midrange, and high-frequency program material within the stated range. An 88 dB sensitivity rating provides a useful reference when matching the speakers with an amplifier.\u003c\/p\u003e\u003cp\u003eThe gray polypropylene injection cone and rubber edge are selected for an outdoor and marine-style speaker design. A black plastic basket supports the driver assembly, while the gray cone finish gives the pair a coordinated appearance for visible installations. These details make the WZ652MTG suitable for applications where conventional interior car-speaker styling is not the goal.\u003c\/p\u003e\u003cp\u003eA 38 mm dome tweeter handles high-frequency reproduction, complementing the 6.5-inch main driver. The listed 1-inch voice coil and 12-ounce strontium magnet are part of the speaker motor and driver construction. Together, these components define the published acoustic configuration without requiring a separate tweeter installation.\u003c\/p\u003e\u003cp\u003eRGB LED lighting adds an accent feature for marine, powersports, and outdoor entertainment systems. The WZ652MTG is supplied as two speakers, making it a practical starting point for a stereo pair or a matching expansion within a larger system. Pair it with a compatible 4-ohm-capable amplifier and plan the speaker and lighting wiring before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Marine Box Format:\u003c\/strong\u003e Compact speaker size for marine and outdoor-oriented audio installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB LED Lighting:\u003c\/strong\u003e Adds illuminated color accents to a visible speaker installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Supports matching with compatible car or marine amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e38 mm Dome Tweeter:\u003c\/strong\u003e Provides dedicated high-frequency reproduction within each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Gray injection cone is paired with a rubber edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair Included:\u003c\/strong\u003e Package contains two matching WZ652MTG speakers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ652MTG uses a gray polypropylene injection cone, rubber edge, black plastic basket, 1-inch voice coil, and 12-ounce strontium magnet. Its visible gray finish and integrated RGB lighting suit installations where the speakers are intended to be seen as part of the system. The speaker is specified as a marine box model, though no IP rating or water-ingress rating is confirmed.\u003c\/p\u003e\u003cp\u003eUse the speakers with amplification that is stable at 4 ohms and power-match from the amplifier's rated output rather than its peak figure. Confirm available mounting space, mounting hardware, wiring routes, and the required RGB-lighting connections before cutting or drilling, because mounting dimensions and lighting-control details are not confirmed. The pair can be used as a left\/right stereo set or added to a compatible multi-speaker outdoor audio system.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":44329025175743,"sku":"B0DTBRW328","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81YKfPE7JpL.jpg?v=1749683521"},{"product_id":"warzone-wz652mtk-6-5-inch-marine-box-speaker-with-rgb-led-lighting-700w-max-4-ohms-black-injection-cone-with-rubber-edge-and-neodymium-magnet-2-speakers","title":"Warzone WZ652MTK 6.5\" Marine Box Speakers with RGB","description":"\u003cp\u003eThe Warzone WZ652MTK is a pair of 6.5-inch marine box speakers designed for boat, RV, and outdoor audio installations. Each pair combines full-range speaker playback with integrated RGB LED lighting for systems that need both sound and visual accent lighting. They are intended for shoppers upgrading an existing marine or outdoor sound system with a compact speaker pair.\u003c\/p\u003e\u003cp\u003eThe WZ652MTK is rated for up to 700 watts maximum power and 300 watts rated power. Its 4-ohm nominal impedance is suited to compatible marine, powersports, or car-audio amplification. With a listed 50Hz-20kHz frequency response and 88dB sensitivity, it is designed to cover bass, midrange, and high-frequency content in a single speaker assembly.\u003c\/p\u003e\u003cp\u003eA 38mm dome tweeter is integrated to handle high-frequency detail, while the 6.5-inch driver uses a 1-inch voice coil. The speaker is also listed with a 12-ounce strontium magnet. These components support a two-way-style listening experience from each enclosed speaker.\u003c\/p\u003e\u003cp\u003eIntegrated multi-color RGB LED lighting adds a visual element to the installation. An external RGB controller is required for lighting control and is not included. This makes the speakers a practical fit for systems already using compatible RGB lighting control hardware.\u003c\/p\u003e\u003cp\u003eThe WZ652MTK uses a black plastic basket, polypropylene injection cone, and rubber edge construction described for marine and outdoor use. The pair can be used as part of a larger audio upgrade alongside a compatible source unit, amplifier, speaker wiring, and RGB controller. Confirm available mounting space, amplifier compatibility, and lighting-control requirements before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Marine Box Format:\u003c\/strong\u003e Compact speaker pair for marine and outdoor audio installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e700W Maximum Power:\u003c\/strong\u003e Handles up to 700 watts maximum power per the listing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Designed for use with compatible audio amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated RGB LEDs:\u003c\/strong\u003e Adds multi-color lighting to the speaker installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e38mm Dome Tweeter:\u003c\/strong\u003e Provides dedicated high-frequency reproduction within each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber-Edge Cone Assembly:\u003c\/strong\u003e Uses a polypropylene injection cone with a rubber edge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ652MTK combines a black plastic basket with a polypropylene injection cone and rubber edge. Its listed 12-ounce strontium magnet, 1-inch voice coil, and 38mm dome tweeter are housed in a marine box speaker design. The package is listed as containing two speakers.\u003c\/p\u003e\u003cp\u003eUse these speakers with a compatible 4-ohm audio system and match the amplifier setup to the product's stated power ratings. RGB lighting requires an external controller, which is not included, so plan for compatible lighting-control hardware separately. Check mounting location clearance and complete speaker and lighting wiring before final mounting.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":44329025503423,"sku":"B0DTBZD2SM","price":169.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81vIeZw6_CL.jpg?v=1749683632"},{"product_id":"warzone-wz652mtw-6-5-inch-marine-box-speaker-with-rgb-led-lighting-700w-max-4-ohms-white-injection-cone-with-rubber-edge-and-neodymium-magnet-2-speakers","title":"Warzone WZ652MTW 6.5\" Marine Box Speakers with RGB LEDs","description":"\u003cp\u003eThe Warzone WZ652MTW is a pair of 6.5-inch marine box speakers designed to add full-range audio to boat, RV, patio, and outdoor sound systems. Its enclosed-box format provides a surface-mount speaker option where conventional in-panel speaker installation may not be practical. RGB LED lighting adds an illuminated visual element to the installation.\u003c\/p\u003e\u003cp\u003eEach set is specified for up to 700 watts maximum power and 300 watts rated power, with a 4-ohm impedance. The speakers cover a stated 50Hz to 20kHz frequency range and have an 88dB sensitivity rating. This combination is intended to reproduce bass, midrange, and treble from a compatible amplified audio system.\u003c\/p\u003e\u003cp\u003eThe WZ652MTW uses a white polypropylene injection cone with a rubber edge. This cone-and-surround arrangement is paired with a black plastic basket for an outdoor-oriented speaker design. The white speaker finish suits marine and exterior installations where a lighter appearance is preferred.\u003c\/p\u003e\u003cp\u003eSound reproduction is supported by a 1-inch voice coil, a 12-ounce strontium magnet, and a 38mm dome tweeter. The dome tweeter is designed to handle high-frequency content while the 6.5-inch driver covers the main listening range. Together, the components make this a two-way-style marine speaker solution with integrated lighting.\u003c\/p\u003e\u003cp\u003eUse the WZ652MTW as a pair for a new marine audio installation or as an upgrade to an existing amplified outdoor system. Its 4-ohm specification should be matched to an amplifier or receiver that supports 4-ohm speakers. Confirm available mounting space, wiring routing, and RGB-lighting connection requirements before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Marine Box Format:\u003c\/strong\u003e Provides a surface-mount speaker option for marine and outdoor installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair of Speakers:\u003c\/strong\u003e Includes two matching white marine box speakers for stereo-system use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e700W Maximum Power:\u003c\/strong\u003e Supports higher-output amplified audio systems within its stated ratings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB LED Lighting:\u003c\/strong\u003e Adds illuminated visual styling to the speaker installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone and Rubber Edge:\u003c\/strong\u003e Combines a white injection cone with a flexible rubber surround.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e38mm Dome Tweeter:\u003c\/strong\u003e Handles high-frequency detail alongside the 6.5-inch main driver.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ652MTW combines a white polypropylene injection cone, rubber edge, black plastic basket, 12-ounce strontium magnet, and 1-inch voice coil. Its marine box configuration places the driver and tweeter in a self-contained speaker housing rather than requiring a conventional door or panel cutout. Integrated RGB LEDs provide a visual feature in addition to the audio hardware.\u003c\/p\u003e\u003cp\u003eInstall the pair in locations that allow secure mounting and safe routing for speaker and lighting connections. Connect each 4-ohm speaker to a compatible amplifier or receiver, observing correct polarity. Verify the mounting surface, available clearance, wiring needs, and RGB-lighting setup details before final installation.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":44329026126015,"sku":"B0DTBRNXW1","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/717ua8YfWRL.jpg?v=1749683730"},{"product_id":"warzone-wz65mg-6-5-inch-2-way-marine-speaker-550w-max-4-ohms-12oz-magnet-gray-injection-cone-with-rubber-edge-for-boats-and-outdoor-audio-pair","title":"WARZONE WZ65MG 6.5\" 2-Way Marine Speakers","description":"\u003cp\u003eThe WARZONE WZ65MG is a pair of 6.5-inch, 2-way marine speakers designed for boat and outdoor audio installations. They offer a weather-conscious alternative to standard car speakers where exposure to moisture and changing conditions is a concern. Their 4-ohm design supports use with compatible marine or outdoor audio amplifiers.\u003c\/p\u003e\u003cp\u003eThis speaker set is intended for boat owners and outdoor-audio users looking to replace or add full-range speakers in a 6.5-inch location. The listed 60Hz-20kHz frequency response is suited to reproducing bass, vocals, and treble across a broad listening range. A stated sensitivity of 88dB provides a useful reference when planning amplifier power and expected output.\u003c\/p\u003e\u003cp\u003eWARZONE lists the WZ65MG with 550W maximum power and 180W rated power. These ratings should be considered alongside the capabilities of the connected amplifier and the installation environment. Proper gain adjustment helps keep the system operating cleanly at higher listening levels.\u003c\/p\u003e\u003cp\u003eThe speaker uses a gray polypropylene injection cone paired with a rubber edge. This material combination is specified for durability while supporting controlled cone movement during playback. A 12-ounce strontium magnet and 1-inch voice coil are part of the speaker motor assembly.\u003c\/p\u003e\u003cp\u003eFor a complete marine or patio system, the WZ65MG can be paired with a compatible 4-ohm amplifier, source unit, and appropriately protected wiring. It is supplied as a pair, allowing installation in two speaker locations. Confirm the vehicle or panel cutout, mounting clearance, and wiring requirements before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch 2-Way Design:\u003c\/strong\u003e Provides a compact full-range speaker option for marine and outdoor installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e550W Maximum Power:\u003c\/strong\u003e Supports higher-output system planning when paired with a suitable amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e180W Rated Power:\u003c\/strong\u003e Gives a continuous-power reference for amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible 4-ohm marine or outdoor audio amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone and Rubber Edge:\u003c\/strong\u003e Combines a gray injection cone with a durable rubber surround.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Resistant Construction:\u003c\/strong\u003e Designed for boat and open-air audio environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ65MG uses a gray polypropylene injection cone with a rubber edge, along with a 12-ounce strontium magnet and 1-inch voice coil. Its water-resistant design is intended for marine and outdoor applications. No IP rating or corrosion-test standard is confirmed in the available product information.\u003c\/p\u003e\u003cp\u003eInstall the pair only in locations that accept 6.5-inch speakers after verifying cutout size and mounting depth, which are not specified by the available listing. Connect each speaker to a compatible 4-ohm amplifier channel and use wiring and connections appropriate for the installation environment. Mounting hardware, grilles, and wiring details should be confirmed with the seller before purchase.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":44329028026559,"sku":"B0DT573PVW","price":57.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71b0rECANtL.jpg?v=1749683866"},{"product_id":"warzone-wz65mk-6-5-inch-2-way-marine-speaker-550w-max-4-ohms-12oz-magnet-black-injection-cone-with-rubber-edge-for-boats-and-outdoor-audio-2-speakers","title":"Warzone WZ65MK 6.5\" 2-Way Marine Speakers","description":"\u003cp\u003eThe Warzone WZ65MK is a pair of 6.5-inch 2-way marine speakers designed for boat and outdoor audio installations. They provide a practical replacement or upgrade option where conventional indoor speakers may not be suitable for open-air use. Their 4-ohm design supports use with compatible marine, car-audio, or outdoor audio systems.\u003c\/p\u003e\u003cp\u003eWith a listed maximum power rating of 550 watts and a rated power figure of 180 watts, the WZ65MK is intended for systems that need substantial output capability. Its stated 60Hz-20kHz frequency response covers bass, midrange, and high-frequency content for full-range playback. An 88dB sensitivity rating is listed for the speaker design.\u003c\/p\u003e\u003cp\u003eThe speaker uses a polypropylene injection cone with a rubber edge. This material combination is intended to support cone durability and controlled movement in outdoor-oriented applications. The black cone presentation gives the pair a clean, understated appearance for marine and recreational installations.\u003c\/p\u003e\u003cp\u003eA 12-ounce strontium magnet and 1-inch, or 25mm, voice coil form the stated motor and voice-coil assembly. These components support the speaker's full-range 2-way design and its published power-handling figures. The WZ65MK is specified with a 4-ohm impedance for compatibility with appropriately rated audio equipment.\u003c\/p\u003e\u003cp\u003eWater-resistant construction makes these speakers suited to boats and other exposed audio locations where moisture can be a consideration. They can be used as part of a new marine system or as replacement speakers in an existing compatible installation. Confirm the available mounting location and the amplifier or receiver's 4-ohm compatibility before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch 2-Way Design:\u003c\/strong\u003e Provides a compact full-range speaker format for marine and outdoor systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e550W Maximum Power:\u003c\/strong\u003e Listed maximum power capability supports higher-output system planning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e180W Rated Power:\u003c\/strong\u003e Provides a published rated-power reference for equipment matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with audio equipment designed to support 4-ohm speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Injection Cone:\u003c\/strong\u003e Uses a durable cone material suited to outdoor-oriented applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Resistant Construction:\u003c\/strong\u003e Helps suit the speakers to marine and open-air installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ65MK uses a black polypropylene injection cone with a rubber edge, paired with a 12-ounce strontium magnet and a 1-inch voice coil. Its water-resistant marine-oriented construction is intended for boat and outdoor audio use. The speakers are supplied as a two-speaker set.\u003c\/p\u003e\u003cp\u003eInstall the pair only in locations that accept 6.5-inch speakers and verify the cutout, mounting depth, and fastener requirements before making modifications, as those dimensions are not confirmed in the available product information. Connect each speaker to compatible 4-ohm-capable equipment and follow the installation guidance supplied with the audio system. These speakers are suited to marine, patio, and other open-air audio applications where water-resistant speaker construction is preferred.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":44329028649151,"sku":"B0DT7TYF74","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71l1CM_8mjL.jpg?v=1749684009"},{"product_id":"warzone-wz65mw-6-5-inch-2-way-marine-speaker-550w-max-4-ohms-12oz-magnet-white-injection-cone-with-rubber-edge-for-boats-and-outdoor-audio-2-speakers","title":"Warzone WZ65MW 6.5\" 2-Way Marine Speakers","description":"\u003cp\u003eThe Warzone WZ65MW is a pair of 6.5-inch, 2-way marine speakers designed for boat and outdoor audio installations. They provide a weather-conscious speaker option for replacing worn factory speakers or adding sound to open-air systems. Their 4-ohm impedance supports use with compatible marine and car-audio amplification.\u003c\/p\u003e\u003cp\u003eRated at 180 watts with a stated 550-watt maximum power figure, the WZ65MW is intended for systems that need clear full-range playback in exposed environments. Its specified 60 Hz to 20 kHz frequency response covers bass, midrange, and high-frequency content. An 88 dB sensitivity rating helps the speakers produce useful output with an appropriately matched amplifier.\u003c\/p\u003e\u003cp\u003eThe speaker uses a polypropylene injection cone with a rubber edge to combine lightweight cone construction with a flexible surround. This material combination is suited to installations where humidity and outdoor exposure are considerations. The visible white-cone presentation also fits many marine interiors and exterior audio layouts.\u003c\/p\u003e\u003cp\u003eA 12-ounce strontium magnet and 1-inch (25 mm) voice coil form the motor assembly specified for this model. The WZ65MW is a 2-way coaxial design, placing its full-range drivers together for a compact installation. This makes it practical where a separate tweeter and crossover installation is not desired.\u003c\/p\u003e\u003cp\u003eSold as a two-speaker set, the WZ65MW can be used as a pair for a boat cockpit, RV, patio, or other outdoor-oriented audio zone. It is a suitable consideration for listeners building a system around compatible 4-ohm speaker channels. For stronger output and cleaner playback at higher volume, match the speakers with amplification that is appropriate for their rated power handling.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch 2-Way Design:\u003c\/strong\u003e Combines full-range drivers in a compact speaker format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e180W Rated Power:\u003c\/strong\u003e Supports systems requiring substantial speaker power handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e550W Maximum Power:\u003c\/strong\u003e Provides the manufacturer-listed peak power capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible car and marine audio amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Uses an injection-molded cone with a rubber edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Resistant Construction:\u003c\/strong\u003e Intended for marine and outdoor-oriented installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ65MW uses a white polypropylene injection cone, rubber surround, 12-ounce strontium magnet, and 1-inch voice coil. Its water-resistant marine-oriented construction is designed for installations exposed to outdoor conditions. The speaker is supplied as a matched pair.\u003c\/p\u003e\u003cp\u003eConfirm the available mounting opening, mounting depth, and clearance behind the mounting surface before installation, as those dimensions were not confirmed in the available product data. Wire each speaker to a compatible 4-ohm channel and use an amplifier or receiver whose output is suitable for the stated 180-watt rated power. These speakers are intended for boats, RVs, and outdoor audio locations where a 6.5-inch coaxial marine speaker is appropriate.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":44329030025407,"sku":"B0DT7MKY6B","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/7162AL_bcHL.jpg?v=1749684235"},{"product_id":"warzone-wz65pi-6-5-inch-mid-range-driver-speaker-1000w-max-4-ohms-25oz-flux-ferrite-magnet-aluminum-dome-tweeter-for-car-audio-systems-2-speakers","title":"Warzone WZ65Pi 6.5\" Mid-Range Driver Speaker Pair","description":"\u003cp\u003eThe Warzone WZ65Pi is a pair of 6.5-inch mid-range driver speakers with integrated aluminum dome tweeters for car-audio systems. It is intended for listeners building an upgraded system that needs dedicated midrange presence and extended high-frequency output. Each pair is specified with a 4-ohm impedance for use with compatible car-audio amplification.\u003c\/p\u003e\u003cp\u003eWith a listed 320-watt rated power handling and 1000-watt peak rating, the WZ65Pi is designed for high-output installations. Its specified 90 dB sensitivity supports efficient output when paired with an appropriately matched amplifier. The stated 110 Hz to 20 kHz frequency response targets upper-bass, midrange, and treble reproduction rather than deep sub-bass duty.\u003c\/p\u003e\u003cp\u003eThe speaker uses a black press-paper cone with a cloth edge to reproduce the midrange portion of the audio signal. A 50 mm aluminum dome tweeter handles the upper-frequency range. This combination is suited to systems seeking clear vocals, instruments, and high-frequency detail from a compact 6.5-inch format.\u003c\/p\u003e\u003cp\u003eA black steel basket provides the structural foundation for the driver assembly. The motor system is listed with a 25-ounce high-density-flux ferrite magnet and a neodymium magnet. These specified materials support the speaker's purpose as a high-output car-audio mid-range and driver solution.\u003c\/p\u003e\u003cp\u003eThe WZ65Pi can be considered for replacement or custom-install locations that accept 6.5-inch speakers, subject to confirming the vehicle's opening, mounting depth, and wiring requirements. Its 4-ohm load should be matched to an amplifier channel rated to operate safely at 4 ohms. For systems requiring low bass, pair it with a properly selected subwoofer rather than relying on this driver for sub-bass reproduction.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Driver Format:\u003c\/strong\u003e Fits applications designed around a common 6.5-inch speaker size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e320W Rated Power:\u003c\/strong\u003e Provides a published continuous-style rated power figure for amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1000W Peak Power:\u003c\/strong\u003e Lists short-duration peak power handling for the speaker pair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible car-audio amplifier channels designed for 4-ohm loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 mm Aluminum Dome Tweeter:\u003c\/strong\u003e Adds dedicated high-frequency reproduction above the midrange driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFerrite Magnet System:\u003c\/strong\u003e Uses a listed 25-ounce high-density-flux ferrite magnet assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ65Pi combines a black steel basket with a black press-paper cone and cloth edge. Its listed magnet system includes a 25-ounce high-density-flux ferrite magnet and a neodymium magnet, while the high-frequency section uses a 50 mm aluminum dome tweeter. The design is intended for car-audio installations where a mid-range driver and tweeter are desired in one speaker assembly.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's speaker opening, mounting depth, terminal clearance, and mounting-hole pattern before installation, as vehicle-specific fitment measurements are not published. Connect each speaker only to a compatible 4-ohm amplifier channel and use appropriate crossover settings to avoid sending sub-bass frequencies below its published 110 Hz lower response limit. The available listing information identifies a two-speaker package, but does not confirm included mounting hardware, grilles, wiring, or a warranty.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":44329031139519,"sku":"B0DT7VZVMG","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71WTSC63ogL.jpg?v=1749684409"},{"product_id":"warzone-wz69mk-6x9-inch-2-way-marine-speaker-1200w-max-4-ohms-20oz-magnet-black-injection-cone-with-rubber-edge-for-boats-and-outdoor-audio-2-speakers","title":"Warzone WZ69MK 6x9-Inch 2-Way Marine Speakers","description":"\u003cp\u003eThe Warzone WZ69MK is a pair of 6x9-inch, 2-way marine speakers designed for boats and outdoor audio installations. It provides a weather-resistant speaker option for replacing worn factory speakers or adding sound to a marine, patio, or RV system. The pair uses a 4-ohm impedance for connection to compatible car or marine audio equipment.\u003c\/p\u003e\u003cp\u003eIts stated 50Hz-20kHz frequency response is intended to cover bass, midrange, and high-frequency content from a single speaker location. With a listed sensitivity of 90dB, the WZ69MK is designed to produce usable output in open-air environments where background noise can be a factor. The 2-way layout supports a balanced presentation without requiring separate component speaker mounting.\u003c\/p\u003e\u003cp\u003eThe WZ69MK is rated at up to 1200 watts maximum power, with a listed rated-power figure of 420 watts. Use an amplifier or receiver that is compatible with 4-ohm speakers and set gain carefully to suit the system. Power ratings should be considered alongside the capabilities of the connected source and amplifier.\u003c\/p\u003e\u003cp\u003eA black polypropylene injection cone and rubber edge form the main moving assembly. The rubber edge is designed to support cone movement while the polypropylene cone provides a durable diaphragm material for outdoor use. A 20-ounce strontium magnet and 1.2-inch voice coil are part of the speaker motor system.\u003c\/p\u003e\u003cp\u003eFor marine and exterior applications, the speakers use a black plastic basket and weather-resistant construction. The product is described for exposure associated with water, salt, and UV conditions, making it suited to appropriately protected speaker locations on boats and outdoor systems. The package is listed as a two-speaker set for a matched left\/right installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Speaker Size:\u003c\/strong\u003e Fits systems designed for nominal 6x9-inch speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Design:\u003c\/strong\u003e Covers a broad range of music frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible marine and car audio equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1200W Maximum Power:\u003c\/strong\u003e Supports higher-output system designs when properly matched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Uses a durable black injection cone with rubber edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Oriented Construction:\u003c\/strong\u003e Weather-resistant materials suit boat and outdoor installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ69MK combines a black polypropylene injection cone, rubber edge, black plastic basket, 20-ounce strontium magnet, and 1.2-inch voice coil. Its materials and construction are described for weather-resistant use, including marine and outdoor environments. The black finish gives the pair a coordinated appearance for installations where exposed speakers are visible.\u003c\/p\u003e\u003cp\u003eConfirm the available mounting opening, mounting depth, grille clearance, and screw pattern before installation, as specific cutout and depth measurements are not published in the confirmed product information. Wire each speaker to a compatible 4-ohm amplifier or receiver while observing polarity, then set amplifier gain conservatively. The pair can be used for boat panels, RV installations, or protected outdoor audio locations.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":44329033498815,"sku":"B0DT7TGHWR","price":74.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71cGkQOgBXL.jpg?v=1749684476"},{"product_id":"warzone-wz69si-6x9-inch-mid-range-driver-speaker-1200w-max-4-ohms-30oz-magnet-black-steel-basket-with-aluminum-dome-tweeter-for-car-audio-single","title":"Warzone WZ69Si 6x9\" Midrange Speaker with Tweeter","description":"\u003cp\u003eThe Warzone WZ69Si is a single 6x9-inch car-audio midrange speaker with an integrated aluminum dome tweeter. It is intended for listeners building or upgrading a vehicle sound system that needs dedicated midrange presence and extended high-frequency output. Its 4-ohm impedance supports use with compatible car-audio amplification.\u003c\/p\u003e\u003cp\u003eRated at 320 watts with a stated 1,200-watt peak-power handling figure, the WZ69Si is designed for amplified systems rather than low-power factory-radio operation alone. The speaker covers a published 90 Hz to 20 kHz frequency range. This makes it suited to applications where vocal, instrument, and treble detail are important parts of the system balance.\u003c\/p\u003e\u003cp\u003eA 50 mm aluminum dome tweeter is included to reproduce upper-frequency detail alongside the main driver. The combined design offers a compact way to add midrange and high-frequency coverage in a 6x9-inch speaker location. For full-range systems, a separate subwoofer may still be used to handle the lowest bass frequencies below the speaker's stated response range.\u003c\/p\u003e\u003cp\u003eThe WZ69Si uses a 30-ounce high-density-flux ferrite magnet and a 1.5-inch (38 mm) voice coil. These components support the speaker's stated power handling and are paired with a 92 dB sensitivity rating. The published specifications position it for custom car-audio installations using an appropriately matched amplifier.\u003c\/p\u003e\u003cp\u003eIts steel basket, press-paper cone, and cloth edge combine traditional speaker materials in a purpose-built automotive format. The black finish helps it blend into many custom door-panel, rear-deck, or fabricated speaker installations. Verify available mounting clearance, cutout dimensions, and vehicle-specific fitment before purchase, as those measurements are not published for this model.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Format:\u003c\/strong\u003e Fits applications designed for a 6x9-inch speaker footprint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e320W Rated Power:\u003c\/strong\u003e Supports use in appropriately amplified car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with amplifiers rated for 4-ohm speaker loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 mm Aluminum Dome Tweeter:\u003c\/strong\u003e Adds dedicated high-frequency reproduction to the speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFerrite Magnet:\u003c\/strong\u003e Uses a 30-ounce high-density-flux ferrite magnet system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90 Hz–20 kHz Response:\u003c\/strong\u003e Covers the published midrange and high-frequency operating range.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ69Si is built around a black steel basket, black press-paper cone, cloth edge, and ferrite magnet assembly. Its 1.5-inch voice coil and aluminum dome tweeter are integrated into a single 6x9-inch speaker unit. The unit is specified as a non-waterproof car-audio speaker.\u003c\/p\u003e\u003cp\u003eUse this speaker in a properly sized 6x9-inch mounting location with sufficient rear clearance and a compatible 4-ohm amplifier channel. Match amplifier gain and crossover settings carefully to the system and avoid exceeding the speaker's rated 320-watt power specification. The product is sold as a single speaker; confirm any needed mounting hardware, wiring, grilles, and installation accessories separately.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":44329039954111,"sku":"B0DT84XHXT","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71THhDOWMAL.jpg?v=1749684580"},{"product_id":"warzone-wz80si-8-inch-mid-range-driver-speaker-750w-max-4-ohms-30oz-magnet-black-steel-basket-with-aluminum-dome-tweeter-for-car-audio-single","title":"Warzone WZ80Si 8\" Mid-Range Speaker with Tweeter","description":"\u003cp\u003eThe Warzone WZ80Si is an 8-inch car-audio mid-range speaker with an integrated aluminum dome tweeter. It is intended for systems that need dedicated midrange presence along with high-frequency output from a single speaker assembly. The 4-ohm design is suited to use with compatible car-audio amplification.\u003c\/p\u003e\u003cp\u003eRated at 300 watts with a listed 750-watt maximum power handling figure, the WZ80Si is built for higher-output aftermarket speaker installations. Its stated 92 dB sensitivity supports efficient output when it is installed and powered appropriately. The listed 85 Hz to 20 kHz frequency range places its emphasis on midrange and upper-frequency reproduction.\u003c\/p\u003e\u003cp\u003eThe speaker uses a black pressed-paper cone with a cloth edge, combining conventional cone materials with a cloth surround treatment. A black steel basket provides the structural frame for the driver. The integrated 50 mm aluminum dome tweeter is designed to extend the speaker's high-frequency coverage.\u003c\/p\u003e\u003cp\u003eAt the motor assembly, the WZ80Si uses a 30-ounce high-density ferrite magnet and a 1.5-inch Kapton voice coil. These confirmed construction details are useful when comparing it with other 8-inch car-audio drivers. The speaker is sold as a single unit rather than a pair.\u003c\/p\u003e\u003cp\u003eThe WZ80Si can be considered for door-mounted custom builds or replacement projects where an 8-inch speaker location and compatible 4-ohm amplification are available. Confirm physical clearance, mounting-hole pattern, and wiring requirements in the vehicle before purchase. No crossover, wiring kit, grille, or amplifier is specified in the confirmed product information.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Speaker:\u003c\/strong\u003e Fits applications designed for an 8-inch car-audio driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W Rated Power:\u003c\/strong\u003e Supports higher-output amplified system designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible 4-ohm car-audio amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 mm Aluminum Tweeter:\u003c\/strong\u003e Adds integrated high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFerrite Magnet:\u003c\/strong\u003e Uses a listed 30-ounce high-density ferrite motor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel Basket:\u003c\/strong\u003e Provides a durable structural frame for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ80Si combines a black steel basket, black pressed-paper cone, cloth edge, ferrite magnet, and Kapton voice coil. Its speaker assembly includes the aluminum dome tweeter, so the midrange driver and high-frequency element are integrated into one unit. The listed item dimensions are approximately 8 by 8 by 5 inches.\u003c\/p\u003e\u003cp\u003eUse the WZ80Si in a location that accepts an 8-inch, door-mount speaker and verify depth, cutout, terminal access, and mounting-hole compatibility before installation. Connect it to an amplifier or system that is compatible with its 4-ohm impedance, following the amplifier and vehicle wiring instructions. Because included installation hardware and accessories are not specified, confirm the contents with the seller before planning the installation.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":44329043525823,"sku":"B0DT7VMWJC","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71zlnK6onhL.jpg?v=1749684663"},{"product_id":"warzone-2x-wz37pti-3-5-inch-super-mid-range-speaker-pair-4-ohm-200w-max-60w-rms-max-90db-sensitivity-ferrite-magnet-glass-fiber-cone-with-rubber-edge-for-pro-car-audio","title":"WARZONE WZ-37PTI 3.5\" Super Midrange Speaker Pair","description":"\u003cp\u003eThe WARZONE WZ-37PTI is a pair of compact 3.5-inch super midrange speakers designed for car-audio installations where space is limited. They focus on the midrange frequencies that carry much of the detail in vocals, instruments, and spoken content. Their 4-ohm design makes them suitable for systems built around compatible car-audio amplification.\u003c\/p\u003e\u003cp\u003eThis speaker pair is intended for listeners upgrading factory locations or adding dedicated midrange drivers to a custom system. With a 60-watt RMS total system rating and 200-watt maximum system rating, the pair is suited to appropriately matched power. Its 90 dB sensitivity supports useful output without requiring excessive amplifier power.\u003c\/p\u003e\u003cp\u003eThe WZ-37PTI uses a glass fiber cone with a rubber edge to support controlled midrange reproduction and everyday durability. A 1-inch aluminum voice coil works with the 10-ounce ferrite magnet motor assembly. The specified 100 Hz to 20 kHz frequency response covers a broad range for a compact midrange driver.\u003c\/p\u003e\u003cp\u003eIts small mounting footprint helps address installations with shallow or restricted speaker locations. The speaker measures 3.36 inches in overall diameter, with a 3.1-inch cutout requirement and 1.66-inch mounting depth. Check the vehicle panel, grille clearance, and mounting surface before installation.\u003c\/p\u003e\u003cp\u003eFor a balanced system, use the WZ-37PTI pair alongside properly selected tweeters, larger midbass drivers, or a subwoofer as needed. Amplifier output, crossover settings, and installation quality will affect final performance. These speakers are a practical option when a compact dedicated midrange pair is needed in a 4-ohm car-audio system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5-Inch Midrange Pair:\u003c\/strong\u003e Compact drivers for space-conscious vehicle installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Designed for compatible 4-ohm car-audio amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS System Rating:\u003c\/strong\u003e Helps guide appropriate amplifier power matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90 dB Sensitivity:\u003c\/strong\u003e Supports efficient output from modest compatible power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass Fiber Cone:\u003c\/strong\u003e Provides a rigid diaphragm for midrange reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFerrite Motor Assembly:\u003c\/strong\u003e Uses a 10-ounce ferrite magnet and aluminum voice coil.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ-37PTI combines a glass fiber cone, rubber edge, 1-inch aluminum voice coil, and 10-ounce ferrite magnet. These materials form the driver assembly used for its stated 100 Hz to 20 kHz response range. The compact round format is intended for installations where larger speakers cannot be accommodated.\u003c\/p\u003e\u003cp\u003eConfirm a 3.1-inch cutout, 1.66-inch mounting depth, and adequate clearance around the 3.36-inch overall diameter before ordering. Use secure mounting and appropriate wiring for the connected amplifier or audio system. Match amplifier gain and crossover settings carefully to the speaker pair's published power handling and intended midrange role.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":45613513736383,"sku":"783501184218","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71o9LFh8VeL.jpg?v=1777926433"},{"product_id":"warzone-2x-wz40pti-4-inch-super-coaxial-speaker-pair-4-ohm-350w-max-80w-rms-90db-sensitivity-ferrite-magnet-woofer-pei-dome-tweeter-for-pro-car-audio","title":"Warzone WZ40PTi 4\" 2-Way Coaxial Speaker Pair","description":"\u003cp\u003eThe Warzone WZ40PTi is a pair of 4-inch, 2-way coaxial car speakers designed for compact speaker locations and general audio-system upgrades. Each pair combines a woofer and tweeter in a single speaker assembly, helping add full-range sound where installation space is limited. Its 4-ohm nominal impedance is suited to many common car-audio speaker applications.\u003c\/p\u003e\u003cp\u003eThis speaker pair is intended for listeners who need a compact replacement or upgrade option without moving to separate component speakers. The coaxial layout places the high-frequency driver over the woofer, allowing mids and highs to come from one mounting location. A 90 dB sensitivity rating supports efficient output with appropriately matched power.\u003c\/p\u003e\u003cp\u003eWarzone rates the WZ40PTi pair at 80 watts RMS system power and 350 watts maximum system power. Its stated 100 Hz to 20 kHz frequency-response range focuses the design on midrange and high-frequency reproduction rather than deep sub-bass. For low-frequency extension, it can be paired with larger speakers or a dedicated subwoofer in a broader system.\u003c\/p\u003e\u003cp\u003eThe woofer uses a glass-fiber cone and a 10-ounce ferrite magnet, while the integrated 44 mm PEI dome tweeter uses an Ndfeb magnet. A specified 5 kHz crossover point divides the signal between the woofer and tweeter. These materials and the 2-way configuration provide a compact approach to reproducing vocal, instrument, and treble detail.\u003c\/p\u003e\u003cp\u003eWith a 3.74-inch cutout requirement and 1.66-inch mounting depth, the WZ40PTi is made for installations with limited rear clearance. The listed 2.18-inch overall height should also be checked against factory grilles, panels, and trim. It is a practical choice for vehicles or custom builds that can accommodate a 4-inch-class coaxial speaker pair.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Inch Coaxial Pair:\u003c\/strong\u003e Combines woofer and tweeter in each compact speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Design:\u003c\/strong\u003e Separates midrange and high-frequency reproduction within one assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80W RMS System Rating:\u003c\/strong\u003e Supports power matching for the complete speaker pair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass-Fiber Woofer Cone:\u003c\/strong\u003e Provides the specified cone material for the midrange driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e44 mm PEI Dome Tweeter:\u003c\/strong\u003e Handles high frequencies through an integrated tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow Mounting Depth:\u003c\/strong\u003e Requires only 1.66 inches of installation depth.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ40PTi uses a glass-fiber woofer cone, a 10-ounce ferrite woofer magnet, and a PEI dome tweeter with an Ndfeb magnet. Its coaxial construction keeps both drivers in a single 4-inch-class speaker format. The integrated crossover is specified at 5 kHz.\u003c\/p\u003e\u003cp\u003eBefore ordering, compare the vehicle or enclosure opening with the 3.74-inch cutout diameter and verify at least 1.66 inches of mounting depth behind the speaker. Also allow for the listed 2.18-inch overall height when retaining an existing grille or panel. The package is listed with two speakers, mounting hardware, and a user manual or installation guide; use appropriately matched 4-ohm channels and observe the 80-watt RMS system rating.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":45613514064063,"sku":"783501184225","price":44.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/813DaqphmeL.jpg?v=1777926495"},{"product_id":"warzone-2x-wz46pti-4x6-inch-super-coaxial-speaker-pair-4-ohm-380w-max-100w-rms-90db-sensitivity-ferrite-woofer-pei-dome-tweeter-for-pro-car-audio","title":"Warzone WZ46PTi 4x6\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Warzone WZ46PTi is a pair of 4x6-inch two-way coaxial car speakers designed for compact factory-speaker replacement locations. It combines a woofer and tweeter in each speaker, allowing a single mounting position to reproduce midrange and high-frequency detail. This format is suited to vehicle audio upgrades where space and mounting depth are limited.\u003c\/p\u003e\u003cp\u003eWith a 4-ohm nominal impedance, the WZ46PTi is intended for use with compatible car stereo speaker outputs or an appropriately matched amplifier. The pair is rated for 100 watts RMS total system power and 380 watts maximum total system power. Its 90 dB sensitivity specification supports useful output from modest-power systems when installed and powered correctly.\u003c\/p\u003e\u003cp\u003eThe speaker uses a glass-fiber woofer cone supported by a 10-ounce ferrite woofer magnet. This woofer construction is paired with a 44 mm PEI dome tweeter using an NdFeB magnet. The two-way arrangement is specified with a 5 kHz tweeter crossover point.\u003c\/p\u003e\u003cp\u003eWarzone lists an 85 Hz to 20 kHz frequency response for the WZ46PTi. Its sound profile is designed to cover the upper bass, midrange, and treble range handled by a compact coaxial speaker. For deeper low-frequency output, it can be used as part of a broader system that adds a properly matched subwoofer.\u003c\/p\u003e\u003cp\u003eInstallation dimensions are important for 4x6-inch speaker replacements because factory openings vary by vehicle. The listed cutout measures 3.26 by 5.52 inches, while mounting depth is 1.66 inches and overall height is 2.45 inches. Confirm the vehicle opening, clearance behind the mounting surface, wiring polarity, and mounting-hole pattern before purchase.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4x6-Inch Coaxial Format:\u003c\/strong\u003e Combines woofer and tweeter in each compact speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Design:\u003c\/strong\u003e Separates woofer and tweeter frequency duties within each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W RMS System Rating:\u003c\/strong\u003e Supports power matching with compatible audio equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass-Fiber Woofer Cone:\u003c\/strong\u003e Provides the specified woofer diaphragm material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e44 mm PEI Dome Tweeter:\u003c\/strong\u003e Handles high-frequency reproduction in the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Mounting Depth:\u003c\/strong\u003e A 1.66-inch depth helps with space-conscious installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ46PTi uses a glass-fiber woofer cone, a 10-ounce ferrite woofer magnet, and a PEI dome tweeter with an NdFeB magnet. Its integrated coaxial layout places the tweeter over the woofer, reducing the space required compared with separate component speakers. The specified 5 kHz crossover directs higher frequencies to the tweeter.\u003c\/p\u003e\u003cp\u003eUse the WZ46PTi where the vehicle accepts a 4x6-inch speaker and where the listed 3.26 by 5.52-inch cutout, 1.66-inch mounting depth, and 2.45-inch overall height can be accommodated. Match the speakers with a 4-ohm-compatible source unit or amplifier and observe correct positive and negative terminal polarity. The available product information confirms a speaker pair, but does not confirm included grilles, wiring adapters, or mounting hardware.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":45613514227903,"sku":"783501184270","price":44.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/916ur7hZZFL.jpg?v=1777926536"},{"product_id":"warzone-2x-wz52pti-5-inch-super-coaxial-speaker-pair-4-ohm-380w-max-100w-rms-90db-sensitivity-ferrite-woofer-pei-dome-tweeter-for-pro-car-audio","title":"Warzone WZ-52PTI 5\" Coaxial Speaker Pair","description":"\u003cp\u003eThe Warzone WZ-52PTI is a pair of 5-inch two-way coaxial car speakers designed for compact factory-speaker replacement locations. It combines a woofer and tweeter in each speaker assembly, helping simplify an upgrade where separate component speakers are not required. The pair uses a 4-ohm design for compatibility with many conventional car-audio speaker circuits.\u003c\/p\u003e\u003cp\u003eThis speaker set is intended for listeners seeking clearer midrange and high-frequency reproduction from a small-format vehicle speaker. Its published 80 Hz to 20 kHz frequency response covers much of the audible range, while the 90 dB sensitivity specification supports efficient output from an appropriately matched system. Bass below the speaker's usable range may require a dedicated subwoofer for a fuller low-frequency system.\u003c\/p\u003e\u003cp\u003eThe WZ-52PTI is rated at 100 watts RMS total system power and 380 watts maximum total system power. These ratings should be considered when selecting a compatible amplifier or evaluating an existing amplified system. Proper gain setting remains important to avoid audible distortion and potential speaker damage.\u003c\/p\u003e\u003cp\u003eEach speaker uses a glass-fiber woofer cone with a rubber surround, pairing rigidity with surround compliance for everyday automotive use. A 44 mm PEI dome tweeter is mounted concentrically and uses an NdFeB magnet. The specified 5 kHz crossover point divides the woofer and tweeter operating ranges within the coaxial design.\u003c\/p\u003e\u003cp\u003eFor installation planning, the published 4.53-inch cutout diameter, 1.85-inch mounting depth, and 2.6-inch overall height should be checked against the vehicle's speaker opening and available clearance. The 5-inch format can suit select door, dash, or rear-deck locations, but vehicle fitment varies by make and model. Use appropriate mounting hardware, secure wiring, and polarity-correct connections as part of the installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Layout:\u003c\/strong\u003e Integrates woofer and tweeter in each speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W RMS System Rating:\u003c\/strong\u003e Provides a published continuous-power reference for amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Fits many standard car-audio speaker circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass-Fiber Woofer Cone:\u003c\/strong\u003e Forms the woofer diaphragm for midrange and lower-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e44 mm PEI Dome Tweeter:\u003c\/strong\u003e Handles high-frequency reproduction within the coaxial design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Mounting Profile:\u003c\/strong\u003e Uses a 4.53-inch cutout and 1.85-inch mounting depth.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ-52PTI combines a glass-fiber woofer cone, rubber surround, 10-ounce ferrite woofer magnet, and PEI dome tweeter. Its tweeter uses an NdFeB magnet, while the coaxial arrangement places the high-frequency driver over the woofer. The published crossover frequency is 5 kHz.\u003c\/p\u003e\u003cp\u003eBefore purchase, measure the vehicle opening, mounting depth, and clearance around the grille or panel against the published 4.53-inch cutout, 1.85-inch depth, and 2.6-inch overall height. Connect each speaker with correct polarity and use secure mounting points to prevent vibration. For amplified systems, select power conservatively around the published total-system RMS rating and set amplifier gain carefully.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":45613514293439,"sku":"783501184232","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81FvJIUoWTL.jpg?v=1777926558"},{"product_id":"warzone-2x-wz68pti-6x8-inch-super-coaxial-speaker-pair-4-ohm-480w-max-160w-rms-92db-sensitivity-ferrite-woofer-pei-dome-tweeter-for-pro-car-audio","title":"Warzone WZ68PTi 6x8\" Coaxial Speaker Pair","description":"\u003cp\u003eThe Warzone WZ68PTi is a pair of 6x8-inch coaxial car speakers designed for replacing compatible factory speakers or building a straightforward aftermarket audio upgrade. Its 4-ohm design suits common automotive speaker applications where a 6x8-inch mounting location is available. The pair combines a woofer and tweeter in each speaker, helping simplify installation compared with separate-component speaker systems.\u003c\/p\u003e\u003cp\u003eWith a stated 160-watt RMS system rating and 480-watt maximum system rating, these speakers are intended for systems that need stronger output than basic replacement speakers. The 92dB sensitivity specification supports efficient sound production from an appropriate car-audio source or amplifier. Their stated 52Hz–20kHz frequency response covers bass, midrange, and treble ranges handled by the coaxial design.\u003c\/p\u003e\u003cp\u003eA glass-fiber woofer cone forms the foundation of the WZ68PTi's midrange and lower-frequency reproduction. A 50mm PEI dome tweeter is mounted concentrically to handle upper frequencies, keeping both drivers aligned within the same speaker assembly. The specified 4.5kHz crossover point divides the signal between the woofer and tweeter.\u003c\/p\u003e\u003cp\u003eThe woofer uses a 15-ounce ferrite magnet, while the tweeter uses an NdFeB magnet in a circuit-driven design. These materials and the two-way layout give the speaker pair a purpose-built structure for full-range automotive listening. The speaker is specified as a coaxial model, so it can be used where a compact, all-in-one speaker solution is preferred.\u003c\/p\u003e\u003cp\u003eBefore purchase, compare the vehicle's available speaker opening and behind-panel clearance with the published cutout and mounting-depth measurements. The WZ68PTi has a 5.12 by 7.31-inch cutout requirement and a 2.36-inch mounting depth. It is a practical option for compatible 6x8-inch locations when matched with suitable wiring, mounting hardware, and power delivery.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x8-Inch Coaxial Pair:\u003c\/strong\u003e Provides two full-range speakers for compatible vehicle locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Driver Layout:\u003c\/strong\u003e Combines a woofer and dome tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e160W RMS System Rating:\u003c\/strong\u003e Supports use in appropriately matched aftermarket audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass-Fiber Woofer Cone:\u003c\/strong\u003e Forms the speaker's primary midrange and low-frequency driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50mm PEI Dome Tweeter:\u003c\/strong\u003e Handles high-frequency detail within the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.5kHz Crossover:\u003c\/strong\u003e Directs frequencies between the woofer and tweeter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ68PTi uses a glass-fiber woofer cone, a 50mm PEI dome tweeter, and separate magnet systems for its woofer and tweeter sections. The woofer is specified with a 15-ounce ferrite magnet, while the tweeter uses an NdFeB magnet. Its coaxial construction places both drivers in one integrated 6x8-inch speaker assembly.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 6x8-inch speaker and check the 5.12 by 7.31-inch cutout, 5.79 by 8.03-inch overall dimensions, and 2.36-inch mounting depth before installation. Use vehicle-appropriate adapters or mounting hardware only if required by the application, as included accessories are not confirmed. Match the speakers to a compatible 4-ohm audio system and avoid exceeding the stated power ratings.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":45613514621119,"sku":"783501184263","price":58.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81A1jeV4nqL.jpg?v=1777926607"},{"product_id":"warzone-2x-wz69pti-6x9-inch-super-coaxial-speaker-pair-4-ohm-650w-max-200w-rms-92db-sensitivity-ferrite-woofer-pei-dome-tweeter-for-pro-car-audio","title":"Warzone WZ69PTi 6x9\" Two-Way Coaxial Speakers","description":"\u003cp\u003eThe Warzone WZ69PTi is a pair of 6x9-inch coaxial car speakers designed to replace or upgrade factory door or rear-deck speakers. Its 4-ohm design is suited to common aftermarket and factory-style car-audio applications where a full-range speaker is needed. The pair combines woofer and tweeter elements in each speaker to provide a compact, integrated solution.\u003c\/p\u003e\u003cp\u003eWith 650 watts maximum and 200 watts RMS system power handling, the WZ69PTi is intended for systems that need more output capability than basic replacement speakers. Its 92 dB sensitivity supports efficient operation from a compatible head unit or external amplifier. Matching amplifier output to the RMS rating is the practical approach for system planning.\u003c\/p\u003e\u003cp\u003eThe two-way coaxial arrangement uses a glass-fiber woofer cone for the lower and middle frequency range, paired with a 50 mm PEI dome tweeter for upper-frequency reproduction. A built-in 4 kHz crossover divides the signal between the drivers. This integrated layout helps keep installation straightforward while retaining dedicated high-frequency reproduction.\u003c\/p\u003e\u003cp\u003eThe WZ69PTi has a stated frequency response of 52 Hz to 20 kHz and uses a 20-ounce ferrite magnet structure. These specifications make it suitable for listeners seeking a broad full-range response from a 6x9-inch speaker location. It can be used as part of a front-stage, rear-fill, or full speaker replacement upgrade, depending on vehicle fitment and system design.\u003c\/p\u003e\u003cp\u003eBefore installation, confirm the vehicle's factory opening, mounting depth, and panel clearance. The speaker's listed frame dimensions, cutout requirements, and 3.15-inch mounting depth provide useful fitment references. Because this is a passive speaker pair, it requires connection to compatible speaker-level amplifier or receiver outputs.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer and tweeter drivers in each 6x9-inch speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200W RMS System Handling:\u003c\/strong\u003e Supports amplifier matching based on the pair's continuous-power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass-Fiber Woofer Cone:\u003c\/strong\u003e Provides the primary low- and mid-frequency driver surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 mm PEI Dome Tweeter:\u003c\/strong\u003e Handles high-frequency detail within the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 kHz Built-In Crossover:\u003c\/strong\u003e Directs appropriate frequencies to the woofer and tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92 dB Sensitivity:\u003c\/strong\u003e Helps produce usable output with compatible car-audio power.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ69PTi uses a glass-fiber woofer cone, PEI dome tweeter, and ferrite magnet assembly. Its coaxial architecture places the high-frequency driver within the woofer assembly, allowing both drivers to fit within a conventional 6x9-inch speaker footprint. The passive design does not include onboard amplification.\u003c\/p\u003e\u003cp\u003eVerify the 4.65 by 6.62-inch cutout, 6.45 by 9.33-inch overall frame size, and 3.15-inch mounting depth against the vehicle before purchase. Connect each speaker to a compatible 4-ohm speaker channel and observe polarity during wiring. For amplified systems, select amplifier power with the 200-watt RMS system rating in mind rather than the maximum-power figure.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":45613514784959,"sku":"783501184256","price":64.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81kvgM_FCfL.jpg?v=1777926641"},{"product_id":"warzone-wz-e652-6-5-coaxial-car-speakers-650w-max-power-4-ohm-full-range-audio-pei-dome-tweeter-shallow-mount-design-oem-fit-perfect-for-cars-trucks-suvs","title":"Warzone WZ-E652 6.5\" Coaxial Car Speakers","description":"\u003cp\u003eThe Warzone WZ-E652 is a 6.5-inch coaxial car speaker designed as a full-range replacement or upgrade for compatible factory door and panel locations. It combines a woofer and tweeter in one speaker assembly to simplify installation where a standard 6.5-inch opening is available. Its 4-ohm design is intended for conventional automotive speaker applications.\u003c\/p\u003e\u003cp\u003eThis model is aimed at drivers who want to replace worn factory speakers or build a more capable everyday car audio system. The listed 650-watt maximum and 325-watt RMS power ratings support use in systems matched appropriately for the speaker's power handling. Its stated 68Hz–20kHz frequency response covers bass, midrange, and high-frequency content within a single coaxial speaker format.\u003c\/p\u003e\u003cp\u003eThe WZ-E652 uses a 1.2-inch woofer voice coil with a 2-inch PEI dome tweeter. This coaxial layout places high-frequency reproduction at the center of the woofer assembly, helping keep the installation compact. A listed 4.5kHz crossover point divides the woofer and tweeter frequency ranges.\u003c\/p\u003e\u003cp\u003eA ferrite magnet structure provides the motor assembly for the speaker. The shallow 2.88-inch mounting depth is useful for vehicles with limited clearance behind the speaker location. Its 5.52-inch cutout requirement can suit many factory-style 6.5-inch openings, though vehicle-specific fitment should always be checked before purchase.\u003c\/p\u003e\u003cp\u003eThese speakers can be used in compatible cars, trucks, and SUVs as part of a factory-speaker replacement or a broader audio upgrade. Confirm the vehicle's mounting depth, opening diameter, mounting pattern, and wiring requirements before installation. For amplified systems, match the amplifier configuration to the speaker's 4-ohm impedance and listed power rating.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Format:\u003c\/strong\u003e Combines woofer and tweeter in a compact full-range speaker design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e650W Maximum Power:\u003c\/strong\u003e Listed maximum power handling for higher-output car audio applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e325W RMS Rating:\u003c\/strong\u003e Listed continuous power rating for system-matching reference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Supports common automotive speaker wiring configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Uses a 2-inch PEI dome tweeter for high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow Mounting Profile:\u003c\/strong\u003e 2.88-inch mounting depth helps fit tighter speaker locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ-E652 uses a coaxial architecture with a 1.2-inch woofer voice coil, 2-inch PEI dome tweeter, and ferrite magnet structure. This layout integrates the high-frequency driver into the woofer assembly while retaining a conventional 6.5-inch car-speaker footprint. The specified frequency response is 68Hz–20kHz, with a 4.5kHz crossover point.\u003c\/p\u003e\u003cp\u003eVerify the available mounting depth and speaker-opening dimensions before installation. The listed cutout diameter is 5.52 inches and mounting depth is 2.88 inches; mounting-hole patterns and factory connector compatibility are not specified. Use appropriate vehicle-specific mounting hardware or adapters when needed, and confirm amplifier or head-unit compatibility with a 4-ohm speaker load.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":45613517537471,"sku":"783501186939","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71pjb22fsKL.jpg?v=1777926749"},{"product_id":"warzone-wz-e693-6x9-coaxial-car-speakers-950w-max-power-4-ohm-full-range-audio-pei-dome-tweeter-shallow-mount-design-perfect-for-oem-replacement","title":"Warzone WZ-E693 6x9\" Coaxial Car Speakers","description":"\u003cp\u003eThe Warzone WZ-E693 is a 6x9-inch coaxial car-speaker model designed for full-range vehicle audio reproduction. It is intended for drivers replacing factory 6x9 speakers or building an aftermarket system around conventional speaker locations. Its 4-ohm impedance supports use with compatible car stereos or external amplification.\u003c\/p\u003e\u003cp\u003eThis model is specified at 950 watts maximum power and 475 watts RMS power. Its stated 52 Hz–20 kHz frequency response is designed to cover bass, midrange, and high-frequency content through a single coaxial speaker assembly. The 4 kHz crossover point is intended to divide frequencies between the woofer and integrated tweeter.\u003c\/p\u003e\u003cp\u003eA 2.3-inch PEI dome tweeter is integrated into the speaker design for high-frequency reproduction. The woofer uses a 1.2-inch voice coil, while a ferrite magnet is specified for the motor structure. Together, these components make the WZ-E693 a full-range coaxial alternative to basic factory speakers.\u003c\/p\u003e\u003cp\u003eThe WZ-E693 is designed around a shallow 3.66-inch mounting depth for installations where rear-deck or door-panel clearance is limited. Its listed overall dimensions are 6.45 by 9.33 inches, with a 5.95 by 8.52-inch cutout requirement. Vehicle-specific fitment should still be checked before purchase because factory brackets, grilles, and mounting patterns vary.\u003c\/p\u003e\u003cp\u003eFor an OEM-replacement-style upgrade, the WZ-E693 can be paired with a compatible 4-ohm head unit or amplifier. Matching the system's available power and confirming mounting depth are important before installation. It is suited to systems seeking 6x9 coaxial speakers with an integrated tweeter rather than separate component speakers.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter functions in one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Supports compatibility with typical 4-ohm mobile-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e950W Maximum Power:\u003c\/strong\u003e Provides the stated maximum power-handling specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e475W RMS Rating:\u003c\/strong\u003e Lists continuous power handling for system matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Uses a 2.3-inch PEI dome for high-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow 3.66-Inch Depth:\u003c\/strong\u003e Helps fit locations with limited mounting clearance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ-E693 uses a coaxial layout with a 1.2-inch woofer voice coil, 2.3-inch PEI dome tweeter, and ferrite magnet. This arrangement places the high-frequency driver within the 6x9 speaker assembly, reducing the need for a separate tweeter location. The published frequency response is 52 Hz to 20 kHz, with a 4 kHz crossover point.\u003c\/p\u003e\u003cp\u003eBefore installation, compare the vehicle's available opening with the listed 5.95 by 8.52-inch cutout size and verify that 3.66 inches of mounting depth is available. Confirm the factory mounting pattern, terminal connection method, and grille clearance, as these details are vehicle dependent. Use the speakers with compatible 4-ohm wiring and audio equipment, and match amplifier power carefully to the published ratings.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":45613517603007,"sku":"783501186953","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71u3xODreRL.jpg?v=1777926769"},{"product_id":"gravity-wzl8-8-midrange-bullet-loud-speaker-1000w-peak-power-4-ohm-impedance-106-db-sensitivity-car-audio-speaker-high-energy-ndfeb-magnet-aluminium-basket","title":"WARZONE WZL8 8\" Midrange Bullet Speaker","description":"\u003cp\u003eThe WARZONE WZL8 is an 8-inch car-audio midrange bullet speaker made to add strong vocal and instrument presence to a vehicle sound system. It is intended for listeners building a louder, more forward-sounding setup than typical factory speakers provide. Its 4-ohm design supports integration with compatible car-audio amplification and speaker systems.\u003c\/p\u003e\u003cp\u003eThis speaker is designed to cover midrange and high-frequency content, helping voices, guitars, horns, and percussion remain distinct during higher-output playback. Its published frequency response extends from 90 Hz to 80,000 Hz, so it is best used as part of a system that includes appropriate bass reinforcement when low-frequency output is desired. The 106 dB sensitivity rating indicates efficient output from the available amplifier power.\u003c\/p\u003e\u003cp\u003eThe WZL8 is rated for up to 1000 watts of peak power handling. Peak power is a short-duration rating rather than a continuous amplifier-matching specification, so amplifier selection should be based on verified continuous output and careful gain adjustment. A properly filtered signal is important when using a dedicated midrange speaker in a multi-speaker system.\u003c\/p\u003e\u003cp\u003eIts high-temperature TIL voice coil is paired with a high-energy NdFeB magnet assembly. These published components are intended to support stable operation in a demanding car-audio environment. An aluminum basket provides a rigid mounting structure for the speaker assembly.\u003c\/p\u003e\u003cp\u003eThe WZL8 fits well in custom door panels, kick panels, speaker pods, and other installations designed for 8-inch midrange drivers. It is a wired speaker and requires an external amplifier or other compatible amplified audio source. Confirm available mounting clearance, signal processing, and impedance compatibility before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Midrange Format:\u003c\/strong\u003e Provides a larger driver platform for dedicated vocal and midrange output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1000W Peak Handling:\u003c\/strong\u003e Supports short-duration high-output playback when properly amplified.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e106 dB Sensitivity:\u003c\/strong\u003e Helps produce strong output with compatible amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with car-audio amplifiers designed for 4-ohm speaker loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90 Hz–80 kHz Response:\u003c\/strong\u003e Covers published midrange and extended high-frequency operating range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNdFeB Magnet And Aluminum Basket:\u003c\/strong\u003e Combines a high-energy magnet with a rigid speaker frame.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZL8 uses an aluminum basket, a high-energy NdFeB magnet, and a high-temperature TIL voice coil. Its bullet-style midrange configuration is designed for a direct, projected sound character in vehicle audio systems. The speaker is listed as a wired, car-mount audio driver.\u003c\/p\u003e\u003cp\u003eInstall the speaker in a securely reinforced 8-inch mounting location with sufficient rear clearance and protection from water exposure. Use an external amplifier or compatible powered source rated to operate safely with a 4-ohm load, and use crossover filtering appropriate for a midrange driver. Verify the physical opening and mounting depth against the speaker itself before cutting any vehicle panel.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":45613525729471,"sku":"B08R1368BB","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71Cbzp_AfVL.jpg?v=1777927653"},{"product_id":"warzone-wzs17rgb-600w-bluetooth-soundbar-custom-rgb-lighting-4-speaker-configuration-compact-design-for-utv-atv-car-marine","title":"WARZONE WZS17RGB 17\" Bluetooth RGB Soundbar","description":"\u003cp\u003eThe WARZONE WZS17RGB is a compact 17.3-inch amplified soundbar designed to add music playback and customizable lighting to powersports and vehicle applications. It combines four speakers, Bluetooth streaming, and wired source connections in one enclosure for installations where space is limited. Its 10-16V operating range supports use in 12V electrical systems.\u003c\/p\u003e\u003cp\u003eThis soundbar is suited to UTV, ATV, car, truck, and marine applications where a traditional multi-component audio installation may not be practical. Built-in amplification eliminates the need for a separate external amplifier for the soundbar itself. Bluetooth 5.0 lets compatible devices stream music wirelessly from up to 33 feet away.\u003c\/p\u003e\u003cp\u003eThe WZS17RGB uses two 3-inch full-range drivers with two 1-inch PEI dome tweeters. This four-speaker configuration is specified for a 45Hz-22kHz frequency response, helping cover low, mid, and high-frequency content in a compact format. Output is rated at 300W RMS and up to 600W maximum.\u003c\/p\u003e\u003cp\u003eIntegrated RGB lighting adds a visual element to the installation without requiring a separate lighting controller. Multiple lighting modes are available, with adjustable brightness and speed settings. The included RF remote provides control without requiring direct line-of-sight to the soundbar.\u003c\/p\u003e\u003cp\u003eFor system flexibility, the WZS17RGB includes USB and line-in source connections alongside an RCA output. It can serve as a self-contained audio solution or as part of a larger vehicle audio setup. The compact enclosure is intended for applications that need an all-in-one soundbar rather than separate speakers and amplifier components.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Amplifier:\u003c\/strong\u003e Built-in amplification powers the soundbar without a separate external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Speaker Configuration:\u003c\/strong\u003e Two full-range drivers and two dome tweeters support broad-frequency playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth 5.0:\u003c\/strong\u003e Stream audio wirelessly from a compatible device up to 33 feet away.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated RGB Lighting:\u003c\/strong\u003e Adjustable lighting modes, brightness, and speed personalize the installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF Remote Control:\u003c\/strong\u003e Manage audio and lighting functions from up to 25 feet away.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired System Connections:\u003c\/strong\u003e USB, line-in, and RCA output expand source and integration options.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZS17RGB uses a slim 17.3-inch soundbar enclosure that consolidates its amplifier, speaker array, Bluetooth receiver, lighting system, and connections into one compact unit. Its speaker complement includes two 3-inch full-range drivers and two 1-inch PEI dome tweeters. The integrated RGB lighting is designed to complement vehicle and powersports installations.\u003c\/p\u003e\u003cp\u003eInstall the soundbar in a suitable location for its 17.3-inch enclosure and connect it to a 10-16V power system. Use Bluetooth for wireless playback, or connect compatible sources through USB or line-in; the RCA output can be used for system integration. The RF remote can be used to adjust volume, EQ settings, track functions, and lighting controls from up to 25 feet away.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":45613525860543,"sku":"783501184676","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81YwCxKiTWL.jpg?v=1777927692"},{"product_id":"warzone-wzs25rgb-800w-24-soundbar-with-rgb-lighting-bluetooth-6-speaker-setup-for-utv-atv-marine-compact-design","title":"Warzone WZS25RGB 24\" RGB Bluetooth UTV Soundbar","description":"\u003cp\u003eThe Warzone WZS25RGB is a compact powered soundbar designed to bring music playback and integrated lighting to UTVs, ATVs, trucks, and marine-oriented installations. Its all-in-one format combines amplification, six speakers, Bluetooth streaming, and source connections in a single 24-inch enclosure. It is suited to riders and vehicle owners who want a straightforward audio upgrade without building a separate component system.\u003c\/p\u003e\u003cp\u003eFour 3-inch full-range drivers and two 1-inch PEI dome tweeters provide the soundbar's six-speaker arrangement. This configuration is intended to cover detailed midrange and high-frequency playback, while the stated 45 Hz to 22 kHz frequency response supports broad music playback. The built-in amplifier is rated at 400 watts RMS and 800 watts maximum power.\u003c\/p\u003e\u003cp\u003eBluetooth 5.0 lets compatible devices stream wirelessly to the soundbar from up to 33 feet away under stated conditions. For wired and stored-media options, the WZS25RGB also provides USB playback and a Line-In connection. An RCA output is available for integration with compatible external audio equipment.\u003c\/p\u003e\u003cp\u003eIntegrated RGB lighting adds a visual element to the installation, with multiple lighting modes and adjustable brightness and speed. The included RF remote can control volume, EQ settings, track selection, and lighting functions without requiring line of sight. Its stated operating range is up to 25 feet.\u003c\/p\u003e\u003cp\u003eThe WZS25RGB is intended for 12-volt electrical systems and accepts a stated operating range of 10 to 16 volts. Its compact 24-inch form factor is useful where roll-cage or vehicle-space constraints limit the size of the audio system. It can serve as a self-contained audio solution or as a foundation for a system using its RCA output.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e400W RMS Amplifier:\u003c\/strong\u003e Built-in amplification powers the soundbar without a separate external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix-Speaker Layout:\u003c\/strong\u003e Four full-range drivers and two dome tweeters handle music playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth 5.0:\u003c\/strong\u003e Stream audio wirelessly from compatible Bluetooth devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB Lighting:\u003c\/strong\u003e Adjustable lighting modes, brightness, and speed personalize the installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Source Options:\u003c\/strong\u003e USB playback and Line-In support more ways to play audio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF Remote Control:\u003c\/strong\u003e Adjust audio and lighting functions from up to 25 feet away.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZS25RGB uses a compact 24-inch soundbar layout with integrated speakers, amplification, connectivity, and RGB lighting. Available product information identifies the driver arrangement and PEI dome tweeter material, but does not specify the enclosure material or an ingress-protection rating. Its single-enclosure design helps keep an installation visually tidy while consolidating core audio functions.\u003c\/p\u003e\u003cp\u003eConnect the soundbar to a compatible 12-volt power system operating within its stated 10 to 16 volt range, then mount it in a location appropriate for the vehicle and its available space. Pair a Bluetooth device for wireless playback, use USB or Line-In for alternate sources, and use the RCA output only with compatible external equipment. Confirm mounting location, clearance, wiring protection, and vehicle-specific fitment before installation.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":45613525926079,"sku":"783501184683","price":219.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/818Kzi6vvXL.jpg?v=1777927720"},{"product_id":"warzone-wzs37rgb-37-soundbar-with-bluetooth-1600w-power-10-speaker-system-custom-rgb-lighting-remote-control-perfect-for-utv-atv-car-truck-marine","title":"Warzone WZS37RGB 37\" Bluetooth RGB Soundbar","description":"\u003cp\u003eThe Warzone WZS37RGB is a 37-inch amplified soundbar designed to add full-range music playback to UTVs, ATVs, cars, trucks, and compatible marine applications. It combines onboard amplification, multiple speaker drivers, Bluetooth streaming, and RGB lighting in one compact enclosure. This format helps simplify an audio upgrade where installing separate speakers and an amplifier may be impractical.\u003c\/p\u003e\u003cp\u003eWith a rated 800 watts RMS and 1,600 watts maximum output, the WZS37RGB is intended for louder open-air listening environments. Its 10-speaker array uses eight 3-inch full-range drivers alongside two 1-inch PEI dome tweeters. The specified 45 Hz to 22 kHz frequency response supports bass presence along with detailed upper-frequency playback.\u003c\/p\u003e\u003cp\u003eBluetooth 5.0 provides wireless music streaming from compatible devices, with A2DP support and a stated operating range of up to 33 feet. USB and line-in connections provide additional ways to connect a music source. An RCA output is also provided for system expansion or integration with compatible equipment.\u003c\/p\u003e\u003cp\u003eBuilt-in RGB lighting adds customizable visual styling to the installation. Multiple color modes and adjustable brightness allow the lighting to be tailored for a vehicle interior, trail setup, or marine installation. The included RF remote lets the user access volume, EQ, track, and lighting controls from up to 25 feet away.\u003c\/p\u003e\u003cp\u003eThe WZS37RGB is designed for 10-16V vehicle electrical systems and has a compact 37.2-inch overall length. It is suited to installations where a single soundbar can serve as the main audio source. For expanded systems, its RCA output can be used with compatible downstream audio equipment.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Speaker Array:\u003c\/strong\u003e Eight full-range drivers and two dome tweeters provide broad sound coverage from one enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e800W RMS Power:\u003c\/strong\u003e Built-in amplification supports high-output playback for open-air vehicle environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth 5.0 Streaming:\u003c\/strong\u003e Stream compatible audio wirelessly with A2DP support and a stated 33-foot range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom RGB Lighting:\u003c\/strong\u003e Multiple color modes and adjustable brightness personalize the soundbar's appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Source Connections:\u003c\/strong\u003e USB and line-in inputs support wired playback options beyond Bluetooth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF Remote Control:\u003c\/strong\u003e Adjust audio, tracks, EQ, and lighting from up to 25 feet away.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZS37RGB uses a compact 37.2-inch soundbar format intended for vehicle and marine-oriented audio installations. Its integrated speaker array, amplifier, wireless receiver, source connections, lighting, and controls reduce the number of separate components required. The durable, compact design is intended for UTV, ATV, car, truck, and marine use.\u003c\/p\u003e\u003cp\u003eConfirm that the planned mounting location can accommodate the 37.2-inch soundbar before installation. Connect it to a compatible 10-16V electrical system and position it for clear sound projection while protecting wiring from pinch points and moving components. Use Bluetooth, USB, or line-in for source playback, and use the RCA output only with compatible external audio equipment.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":45613526417599,"sku":"783501184690","price":349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71E5zD-HD_L.jpg?v=1777927741"},{"product_id":"audio360-ad36tw-4-inch-super-tweeter-speaker-4-ohm-1800w-max-power-105db-sensitivity-titanium-diaphragm-ccaw-voice-coil-for-pro-car-audio","title":"Audio360 AD36TW 4-Inch Super Tweeter Speaker","description":"\u003cp\u003eThe AUDIO360 AD36TW is a 4-inch super tweeter designed to add high-frequency detail to a car-audio system. It is a 4-ohm speaker with a published frequency range of 2 kHz to 20 kHz. This makes it suited to systems that need a dedicated driver for upper-frequency reproduction alongside midrange speakers and subwoofers.\u003c\/p\u003e\u003cp\u003eWith a published sensitivity of 105 dB, the AD36TW is intended for applications where efficient high-frequency output is important. Its 1,800-watt maximum-power specification identifies it as a pro-car-audio-oriented component, while no RMS power rating is published. Match the speaker with compatible amplification and system tuning rather than selecting equipment from maximum-power figures alone.\u003c\/p\u003e\u003cp\u003eThe AD36TW uses a titanium diaphragm and a CCAW voice coil. Titanium is specified for the diaphragm material, while CCAW refers to copper-clad aluminum wire in the voice coil. These published construction details distinguish the driver from basic paper- or polymer-diaphragm tweeters.\u003c\/p\u003e\u003cp\u003eThis super tweeter is a practical choice for enthusiasts building a multi-driver setup that needs more presence in the upper frequencies. Its 4-ohm nominal impedance allows it to be considered for amplifiers or passive networks designed for 4-ohm speaker loads. The published 2 kHz to 20 kHz range provides a useful starting point when planning system crossover points.\u003c\/p\u003e\u003cp\u003eThe 12.3-ounce magnet specification supports the AD36TW's dedicated high-frequency-driver design. Use it as part of a properly configured car-audio system rather than as a full-range replacement speaker. Because published mounting measurements and included accessories are not available, confirm physical fitment and installation hardware before purchase.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Inch Super Tweeter:\u003c\/strong\u003e Adds a dedicated high-frequency driver to compatible car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Nominal Impedance:\u003c\/strong\u003e Supports matching with compatible 4-ohm amplifier or crossover channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,800W Maximum Power:\u003c\/strong\u003e Published maximum-power handling for pro-car-audio system planning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e105 dB Sensitivity:\u003c\/strong\u003e Indicates efficient output from the rated speaker input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium Diaphragm:\u003c\/strong\u003e Uses a titanium diaphragm for high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Features a copper-clad aluminum wire voice coil.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD36TW combines a titanium diaphragm, CCAW voice coil, and a published 12.3-ounce magnet. It is specified as a 4-inch tweeter with a 4-ohm nominal impedance. The design is focused on reproducing the upper portion of a multi-speaker car-audio system's frequency range.\u003c\/p\u003e\u003cp\u003eInstall the AD36TW only with equipment appropriate for a 4-ohm tweeter and configure the system so the speaker is used within its published 2 kHz to 20 kHz range. An appropriate crossover or high-pass arrangement should be selected as part of the overall system design; no crossover is specified as included. Verify available mounting depth, cutout requirements, wiring hardware, and package contents with the seller or installer before installation.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":45613552566463,"sku":"783501154389","price":37.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61UsGYKeH-L.jpg?v=1777929998"},{"product_id":"audio360-ad43tw-4-72-inch-full-led-super-tweeter-speaker-4-ohm-2000w-max-power-106db-sensitivity-phenolic-diaphragm-ccaw-voice-coil-for-pro-marine-audio","title":"Audio360 AD43TW 4.72\" LED Super Tweeter","description":"\u003cp\u003eThe Audio360 AD43TW is a 4.72-inch super tweeter designed to add focused high-frequency output to car and marine audio systems. It is intended for listeners building systems that need more treble presence, detail, and projection than conventional full-range speakers alone provide. Its 4-ohm nominal impedance supports integration with appropriately matched external amplification.\u003c\/p\u003e\u003cp\u003eCovering a stated 2 kHz to 18 kHz frequency range, the AD43TW is built to reproduce the upper-frequency information that helps instruments, vocals, and percussion remain distinct in a high-output system. Its 106 dB sensitivity rating indicates efficient output from relatively modest amplifier power. The result is a forward, detailed high-frequency character suited to custom audio installations.\u003c\/p\u003e\u003cp\u003eThe AD43TW uses a phenolic diaphragm and a CCAW voice coil. This material combination is specified for durable operation and responsive high-frequency reproduction. A 16.9-ounce magnet supports the tweeter assembly for stable performance.\u003c\/p\u003e\u003cp\u003eFull LED lighting is integrated into the design, adding a visual element for installations where appearance is part of the build. The lighting offers different lighting options according to the product listing. This makes the AD43TW a practical fit for custom vehicle and marine setups that combine audio upgrades with illuminated trim.\u003c\/p\u003e\u003cp\u003eUse the AD43TW as part of a properly designed multi-speaker system, rather than as a replacement for midrange or bass drivers. Pair it with compatible amplification and suitable high-frequency filtering to keep the tweeter operating within its stated frequency range. Its compact 4.72-inch format can suit custom panels, pods, and other dedicated tweeter locations where installation space allows.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.72-Inch Super Tweeter:\u003c\/strong\u003e Adds dedicated high-frequency output in a compact speaker format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2,000W Maximum Power:\u003c\/strong\u003e Provides stated peak power-handling capacity for high-output systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Supports use with compatible car or marine amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e106 dB Sensitivity:\u003c\/strong\u003e Helps produce efficient and prominent treble output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhenolic Diaphragm:\u003c\/strong\u003e Provides the specified durable diaphragm construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull LED Lighting:\u003c\/strong\u003e Adds illuminated styling with different lighting options.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD43TW combines a phenolic diaphragm, CCAW voice coil, and 16.9-ounce magnet in a compact super-tweeter design. Its full LED treatment gives it a distinct appearance for visible custom installations. The product is specified for car and marine audio use.\u003c\/p\u003e\u003cp\u003eConfirm the available mounting space before installation; the product is listed as 4.72 inches, while the overall packaged\/product dimensions are listed as 5 x 5 x 5 inches. Connect it only to an amplifier configuration compatible with a 4-ohm speaker load, and use appropriate crossover or high-pass protection for a super tweeter. Plan LED wiring separately from speaker wiring and follow the supplied product instructions where available.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":45613552631999,"sku":"783501154396","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61G2qkQsifL.jpg?v=1777930016"},{"product_id":"audio360-ad44tw-3-93-inch-super-tweeter-speaker-4-ohm-2200w-max-power-106db-sensitivity-pei-diaphragm-ccar-voice-coil-for-pro-car-audio","title":"Audio360 AD44TW 3.93\" Super Tweeter Speakers","description":"\u003cp\u003eThe Audio360 AD44TW is a 3.93-inch super tweeter pair designed to add dedicated high-frequency output to a car-audio system. It is suited to builds that need more presence and detail in the upper-frequency range than full-range speakers alone can provide. With a 4-ohm nominal impedance, the pair is intended for use in wired automotive audio installations.\u003c\/p\u003e\u003cp\u003eEach AD44TW is rated for up to 2200 watts maximum power, for a listed 4400-watt total maximum power rating for the pair. Its 106 dB sensitivity specification supports strong output from comparatively modest amplifier power when the system is set up correctly. The stated 1.5 kHz to 20 kHz frequency range focuses this driver on upper midrange and treble reproduction.\u003c\/p\u003e\u003cp\u003eA PEI diaphragm is used for the moving high-frequency element, while the voice coil is specified as CCAR. This material combination is intended to support consistent high-frequency reproduction in a car-audio environment. The 13-ounce magnet specification contributes to the driver assembly's structure and stability.\u003c\/p\u003e\u003cp\u003eThe AD44TW is a practical choice for enthusiasts building a louder, more detailed multi-speaker system. It can complement dedicated midrange drivers, coaxial speakers, and a properly configured amplifier system. Because it is a super tweeter, it is best used as part of a frequency-managed setup rather than as a stand-alone full-range speaker.\u003c\/p\u003e\u003cp\u003eFor a matched left-and-right installation, this listing includes two AD44TW super tweeters. Their compact 3.93-inch size can suit custom panels, doors, pillars, or other suitable locations when adequate mounting space is available. Final output and tonal balance depend on proper crossover selection, amplifier matching, and careful level setting.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.93-Inch Super Tweeters:\u003c\/strong\u003e Compact drivers dedicated to upper-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Fits common car-audio amplifier and crossover configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2200W Maximum Per Tweeter:\u003c\/strong\u003e Supports high-output system planning when properly configured.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e106 dB Sensitivity:\u003c\/strong\u003e Helps the tweeters produce strong output efficiently.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Diaphragm:\u003c\/strong\u003e Provides the specified diaphragm material for treble reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Ounce Magnet:\u003c\/strong\u003e Adds mass to the driver motor assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD44TW uses a PEI diaphragm and a CCAR voice coil in a compact super-tweeter format. Each driver is specified with a 13-ounce magnet and a 3.93-inch speaker size. The black, wired design is intended for automotive audio use.\u003c\/p\u003e\u003cp\u003eInstall the pair in a secure location with appropriate clearance for the mounting arrangement and wiring. Use a suitable high-pass crossover or other frequency-management method to keep low-frequency content out of the tweeters, and match the amplifier and crossover to the 4-ohm load. Confirm polarity between left and right speakers, then set gain conservatively to integrate their output with the rest of the system.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":45613552664767,"sku":"783501154402","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61-6n0lWlnL.jpg?v=1777930036"},{"product_id":"audio360-ad48tw-5-49-x-4-72-inch-super-tweeter-speaker-4-ohm-2500w-max-power-107db-sensitivity-phenolic-diaphragm-ccaw-voice-coil-for-pro-car-and-marine-audio","title":"Audio360 AD48TW 5.49\" Super Tweeter","description":"\u003cp\u003eThe Audio360 AD48TW is a high-frequency super tweeter designed to add upper-range detail to a car or marine audio system. It is intended for listeners building systems that need dedicated treble reproduction beyond what larger speakers or subwoofers provide. The requested configuration includes two AD48TW tweeters for left- and right-channel use.\u003c\/p\u003e\u003cp\u003eEach AD48TW is rated at 4 ohms and listed with 2,500 watts maximum power handling, for 5,000 watts total maximum handling across the pair. Its 107 dB sensitivity rating indicates efficient output from comparatively modest amplifier power. The stated 2 kHz to 20 kHz frequency range focuses the driver on upper-midrange and high-frequency duties.\u003c\/p\u003e\u003cp\u003eA phenolic diaphragm is used for the sound-producing element, while the voice coil uses CCAW construction. These materials are part of the driver design specified for this model. A 15.2-ounce magnet is also listed for each tweeter.\u003c\/p\u003e\u003cp\u003eThe AD48TW is suited to systems using separate low-, mid-, and high-frequency drivers rather than as a replacement for a full-range speaker. It can complement midrange speakers and subwoofers by handling the upper portion of the audible frequency range. Its wired connection format makes it appropriate for conventional amplified car-audio speaker wiring.\u003c\/p\u003e\u003cp\u003eThis model is listed for car and marine audio applications, giving installers flexibility when selecting a high-frequency driver for a vehicle or boat system. Proper system matching remains important because the 4-ohm load must be compatible with the amplifier channel and crossover arrangement. The product is listed as a super tweeter, so it should be integrated as part of a multi-driver system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Tweeter Design:\u003c\/strong\u003e Adds dedicated high-frequency output to a multi-speaker audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with amplifier channels designed for 4-ohm speaker loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e107 dB Sensitivity:\u003c\/strong\u003e Supports efficient high-frequency output with appropriate system power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 kHz–20 kHz Response:\u003c\/strong\u003e Covers upper-midrange and treble frequencies specified for the driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhenolic Diaphragm:\u003c\/strong\u003e Uses the specified phenolic material for the diaphragm assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Features a copper-clad aluminum wire voice coil design.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD48TW uses a phenolic diaphragm, CCAW voice coil, and a listed 15.2-ounce magnet. Its published overall size is 5.49 by 4.72 inches, placing it in the large-format super-tweeter category. The model is specified as a wired dynamic-driver tweeter for automotive and marine-oriented audio applications.\u003c\/p\u003e\u003cp\u003eMount the pair where their high-frequency output can be directed toward the listening area and where the 5.49 by 4.72-inch footprint can be accommodated. Connect each tweeter to an amplifier or speaker circuit compatible with a 4-ohm load, and use an appropriate crossover or high-pass arrangement so the driver operates within its listed 2 kHz to 20 kHz frequency range. Confirm available mounting clearance and system wiring before installation.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":45613552697535,"sku":"783501154419","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61FX_9_-5SL.jpg?v=1777930052"},{"product_id":"audio360-ad6510p-6-5-inch-4-way-coaxial-car-speaker-650w-max-power-92db-sensitivity-4-ohm-impedance-perfect-for-custom-installations","title":"Audio360 AD6510P 6.5\" 4-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Audio360 AD6510P is a 6.5-inch 4-way coaxial car speaker designed for vehicle audio upgrades where space and straightforward fitment matter. Its compact format is suited to many door-panel, rear-deck, and custom speaker locations that accept a 6.5-inch driver. It is intended for listeners who want to replace factory speakers or build out an aftermarket sound system.\u003c\/p\u003e\u003cp\u003eThis model combines a 4-way coaxial layout with a 4-ohm nominal impedance for use with compatible aftermarket head units and amplifiers. The 92 dB sensitivity rating supports efficient output from modest-power sources while remaining suitable for amplified systems. Its sound character is aimed at strong midbass presence and clear everyday playback.\u003c\/p\u003e\u003cp\u003eThe AD6510P is rated at 650 watts maximum power and 325 watts RMS per speaker. These published ratings make proper amplifier gain setting especially important for reliable operation. Match the system carefully and avoid driving the speakers into audible distortion.\u003c\/p\u003e\u003cp\u003eAn injection-molded cone and rubber edge form the core of the speaker's woofer assembly. This material combination is designed to provide a durable moving surface while helping control cone movement. The coaxial construction keeps the multi-driver arrangement in a single speaker location, which can simplify an upgrade where separate tweeter mounting is not planned.\u003c\/p\u003e\u003cp\u003eWith a stated 2.76-inch mounting depth and 5.63-inch cutout diameter, the AD6510P can be considered for installations with limited rear clearance. Verify the vehicle's factory opening, available depth, mounting-hole pattern, and window or mechanism clearance before purchase. It can serve as part of a front- or rear-speaker upgrade when paired with compatible wiring and source equipment.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Format:\u003c\/strong\u003e Fits many common vehicle speaker locations and custom panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Way Design:\u003c\/strong\u003e Combines multiple drivers into one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e650W Maximum Power:\u003c\/strong\u003e Provides published headroom for compatible amplified systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e325W RMS Rating:\u003c\/strong\u003e Helps guide amplifier matching and gain adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92 dB Sensitivity:\u003c\/strong\u003e Supports efficient output with compatible source power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with many aftermarket head units and amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD6510P uses an injection-molded cone with a rubber edge for a durable speaker assembly. Its 4-way coaxial design places the speaker elements together in a compact footprint. This makes it practical for installations that do not have separate locations for dedicated tweeters.\u003c\/p\u003e\u003cp\u003eConfirm that your vehicle supports a 5.63-inch cutout and at least 2.76 inches of mounting depth before installation. Use appropriate vehicle-specific brackets or adapters when required, and check clearance behind the speaker before fastening it in place. For amplified use, set gains conservatively and use compatible 4-ohm-capable equipment.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":45613555712191,"sku":"783501184393","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71FgnYTL49L.jpg?v=1777930169"},{"product_id":"audio360-ad6915p-6x9-4-way-coaxial-car-speakers-1000w-max-power-high-efficiency-output-perfect-for-factory-upgrades","title":"AUDIO360 AD6915P 6x9\" 4-Way Coaxial Car Speakers","description":"\u003cp\u003eThe AUDIO360 AD6915P is a 6x9-inch 4-way coaxial car speaker designed for factory-location upgrades in vehicles with compatible 6x9 mounting positions. It provides an all-in-one speaker configuration for replacing worn or underperforming door or rear-deck speakers. Its 4-ohm design supports use with many aftermarket head units and amplifiers.\u003c\/p\u003e\u003cp\u003eThis model is intended for drivers who want fuller output and stronger midbass from a factory-sized speaker location. The stated 92 dB sensitivity helps it produce substantial output from available amplifier power. It is suited to everyday listening systems as well as custom car-audio installations using 6x9 speaker locations.\u003c\/p\u003e\u003cp\u003eThe AD6915P is rated at 1000 watts maximum power and 500 watts RMS. Proper power matching remains important, so amplifier output and gain settings should be selected carefully for the speaker system. A compatible amplifier can help provide controlled output when higher volume is desired.\u003c\/p\u003e\u003cp\u003eAn injection-molded cone and rubber surround form the speaker's primary moving assembly. This construction is intended to support cone control and durability during regular vehicle use. The coaxial layout places multiple drivers within the 6x9 speaker format for broad sound coverage from a single mounting location.\u003c\/p\u003e\u003cp\u003eWith a 3.54-inch mounting depth and an 8.58 x 5.87-inch cutout requirement, the AD6915P should be measured against the vehicle's available space before purchase. It can be used in compatible doors, rear decks, or custom panels. Vehicle-specific mounting adapters, wiring harnesses, or hardware may be needed depending on the installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Format:\u003c\/strong\u003e Fits compatible factory-size speaker locations and custom panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Way Coaxial Design:\u003c\/strong\u003e Combines multiple drivers within one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1000W Maximum Power:\u003c\/strong\u003e Provides stated high-output power-handling capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Rating:\u003c\/strong\u003e Supports power matching with compatible amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92 dB Sensitivity:\u003c\/strong\u003e Helps deliver strong output from available power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with many aftermarket radios and amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD6915P uses an injection-molded cone with a rubber surround. These materials are specified to support cone control and long-term durability. Its 4-way coaxial construction consolidates the speaker elements into a single 6x9-inch assembly.\u003c\/p\u003e\u003cp\u003eConfirm both the 3.54-inch mounting depth and 8.58 x 5.87-inch cutout dimensions against the intended location before installation. Use vehicle-appropriate brackets, wiring adapters, and mounting hardware where required; their inclusion is not confirmed. For amplified systems, match the amplifier configuration to the 4-ohm speaker load and set gains conservatively.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":45613555744959,"sku":"783501184386","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81C2zDpDq9L.jpg?v=1777930186"},{"product_id":"stx-audio-mx65-2g-6-5-inch-2-way-rgb-led-marine-coaxial-speakers-350w-max-4-ohms-water-resistant-with-remote-control-for-rgb-illumination-2-speakers","title":"STX Audio MX65-2G 6.5\" RGB LED Marine Speakers","description":"\u003cp\u003eThe STX Audio MX65-2G is a pair of 6.5-inch marine coaxial speakers designed to add audio and RGB illumination to a boat or other water-exposed audio installation. Their water-resistant construction addresses the need for speakers suited to environments where moisture and splashes are a concern. The package includes two speakers for a matched left\/right installation.\u003c\/p\u003e\u003cp\u003eEach speaker uses a 2-way coaxial layout, combining the system’s drivers into a single 6.5-inch speaker assembly. This format is well suited to installations where space is limited and a conventional round marine speaker location is available. The speakers present a 4-ohm load for compatibility with appropriately matched audio equipment.\u003c\/p\u003e\u003cp\u003eThe MX65-2G is rated for up to 350 watts maximum power handling. It is intended for listeners who want a compact marine speaker upgrade with both music playback and integrated accent lighting. Because no RMS rating is confirmed, amplifier selection should be based on the equipment manufacturer’s guidance and careful gain setup.\u003c\/p\u003e\u003cp\u003eIntegrated RGB LED illumination gives the speakers a visual element in addition to their audio role. A remote control is included for operating the RGB illumination, allowing lighting adjustments without changing the audio source. This makes the pair suitable for marine audio systems where coordinated lighting is part of the installation plan.\u003c\/p\u003e\u003cp\u003eUse the MX65-2G as a stereo pair in a marine audio system with a compatible 4-ohm amplifier or receiver. Their 6.5-inch nominal size can suit many common speaker locations, but mounting dimensions have not been confirmed and should be checked before installation. The water-resistant design makes them a practical option where conventional indoor speakers are not appropriate.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Speaker Size:\u003c\/strong\u003e Fits installations designed around a common round marine-speaker format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Combines the speaker system into one compact assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e350W Maximum Handling:\u003c\/strong\u003e Supports higher-output marine audio system applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with audio equipment designed for 4-ohm speaker loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB LED Illumination:\u003c\/strong\u003e Adds adjustable lighting to the speaker installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Remote Control:\u003c\/strong\u003e Provides control of the RGB illumination functions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MX65-2G uses a water-resistant marine-oriented design with integrated RGB LED illumination. It is sold as a pair of 6.5-inch, 2-way coaxial speakers for matched stereo placement. Specific cone, surround, basket, magnet, and IP-rating details are not confirmed.\u003c\/p\u003e\u003cp\u003eBefore installation, verify the mounting cutout, mounting depth, grille clearance, and wiring access at the intended location, as exact mounting dimensions are not confirmed. Connect the speakers to equipment compatible with a 4-ohm load and route the RGB illumination wiring according to the supplied instructions. Set amplifier gain conservatively to avoid stressing the speakers.\u003c\/p\u003e","brand":"STX AUDIO","offers":[{"title":"Default Title","offer_id":45613581107391,"sku":"783501155560","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71FWB0m9MhL.jpg?v=1777933049"},{"product_id":"stx-audio-mx65-2w-6-5-inch-2-way-rgb-led-marine-coaxial-speakers-350w-max-4-ohms-water-resistant-with-remote-control-for-rgb-illumination-2-speakers","title":"STX Audio MX65-2W 6.5\" RGB LED Marine Coaxial Speakers","description":"\u003cp\u003eThe STX Audio MX65-2W is a pair of 6.5-inch marine coaxial speakers designed to add audio and RGB illumination to boats and other water-exposed recreational installations. Its 2-way coaxial layout combines the speaker elements into each assembly, helping simplify a compact speaker upgrade. The white presentation and integrated RGB LED lighting suit installations where a coordinated marine-audio appearance is desired.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for shoppers replacing or adding 6.5-inch speakers in a marine audio system. Their 4-ohm nominal impedance supports use with audio equipment designed for 4-ohm speakers. Confirm available mounting clearance, wiring, and amplifier or receiver compatibility before installation.\u003c\/p\u003e\u003cp\u003eThe MX65-2W is rated for up to 350 watts maximum power and is sold as a two-speaker set. This makes it suitable for left- and right-channel use in a stereo system. For system matching, use the amplifier or receiver manufacturer’s guidance and avoid treating the maximum-power figure as a continuous-power rating.\u003c\/p\u003e\u003cp\u003eIntegrated RGB LED illumination provides a visual accent around the speakers, while the included remote control is intended for RGB lighting operation. The lighting function lets users tailor the appearance of a compatible installation without changing the speaker pair. Audio wiring and RGB-lighting connections should be planned separately during setup.\u003c\/p\u003e\u003cp\u003eWater-resistant construction makes the pair appropriate for marine-oriented applications where speakers may encounter moisture. They can be used as part of a boat-audio refresh or alongside a compatible 4-ohm amplifier, receiver, and RGB lighting wiring arrangement. Because the published information does not provide mounting dimensions or continuous-power handling, verify those requirements against the physical installation and connected equipment.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Size:\u003c\/strong\u003e Fits applications designed around 6.5-inch speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Combines speaker elements within each speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB LED Illumination:\u003c\/strong\u003e Adds selectable decorative lighting to the speaker installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Control Included:\u003c\/strong\u003e Provides control for the RGB illumination function.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches audio systems designed for 4-ohm speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Resistant Construction:\u003c\/strong\u003e Suits marine-oriented installations exposed to moisture.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MX65-2W uses a white marine-style presentation with integrated RGB LED illumination. It is described as water-resistant rather than as an immersion-rated product, so installation location and exposure should be considered carefully. The pair configuration provides two matching speakers for a stereo installation.\u003c\/p\u003e\u003cp\u003eVerify that the mounting location accepts a 6.5-inch speaker and has sufficient depth and clearance before cutting or fastening anything. Connect the audio terminals to a compatible 4-ohm-capable amplifier or receiver, then connect the RGB lighting system according to its supplied instructions. Use appropriately protected marine-grade wiring and secure connections for installations exposed to moisture and vibration.\u003c\/p\u003e","brand":"STX AUDIO","offers":[{"title":"Default Title","offer_id":45613581435071,"sku":"783501155577","price":72.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71TsFCB786L.jpg?v=1777933189"},{"product_id":"stxaudio-stx-55tw-3-4-inch-super-tweeter-speaker-4-ohm-800w-max-power-105db-sensitivity-titanium-diaphragm-ccaw-voice-coil-for-pro-car-audio","title":"STX Audio STX-55TW 3.4\" Super Tweeter","description":"\u003cp\u003eThe STX Audio STX-55TW is a 3.4-inch super tweeter designed to add dedicated high-frequency output to a car or pro-audio speaker system. It is intended for systems that need more presence and definition in the upper-frequency range than full-range speakers alone may provide. Its 4-ohm nominal impedance supports integration with compatible car-audio amplification and speaker networks.\u003c\/p\u003e\u003cp\u003eThis tweeter is aimed at enthusiasts building custom vehicle audio systems, including high-output setups that need a separate driver for treble detail. The listed 105 dB sensitivity supports efficient output from relatively modest amplifier power. Its stated frequency range of 2 kHz to 18 kHz focuses its role on upper-midrange and high-frequency reproduction.\u003c\/p\u003e\u003cp\u003eA titanium diaphragm is used for the moving diaphragm, paired with a CCAW voice coil. This combination is intended for the fast, controlled operation required of a high-frequency driver. The STX-55TW is rated for up to 800 watts maximum power handling; an RMS power rating is not confirmed.\u003c\/p\u003e\u003cp\u003eThe compact 3.4-inch format is suited to custom panels, speaker pods, and other locations where a dedicated tweeter can be positioned toward the listening area. It can complement midrange speakers or other drivers in a multi-way system rather than replace them. Proper frequency division is important because this is a super tweeter, not a full-range speaker.\u003c\/p\u003e\u003cp\u003eFor system upgrades, the STX-55TW can be used where clearer cymbals, vocal articulation, and upper-frequency detail are desired. Its listed 7.9-ounce magnet supports the driver assembly, while its metallic appearance coordinates with many custom-install applications. The standard STX-55TW listing is for one tweeter; separate paired listings are also sold under different package SKUs.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.4-Inch Super Tweeter:\u003c\/strong\u003e Adds a dedicated high-frequency driver to a multi-speaker audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches many compatible car-audio amplifiers and speaker networks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e105 dB Sensitivity:\u003c\/strong\u003e Supports efficient high-frequency output in high-output system designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium Diaphragm:\u003c\/strong\u003e Provides a rigid diaphragm material for treble reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Uses copper-clad aluminum wire in the voice-coil assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e800W Maximum Rating:\u003c\/strong\u003e Indicates the listed maximum power-handling specification, not RMS power.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe STX-55TW uses a titanium diaphragm and CCAW voice coil in a compact super-tweeter format. It has a listed metallic finish and a 7.9-ounce magnet. Product-listing dimensions are 2.5 x 4 x 4 inches, with a listed item weight of 0.66 kg.\u003c\/p\u003e\u003cp\u003eInstall the tweeter in a secure location aimed appropriately for the listening area, using a mounting arrangement suited to the vehicle or custom panel. Connect it by wire with correct polarity and pair it with a compatible amplifier or speaker circuit. Because no included crossover specifications are confirmed, use an appropriately selected high-pass crossover or active crossover setup to protect the tweeter from low-frequency content.\u003c\/p\u003e","brand":"STX AUDIO","offers":[{"title":"Default Title","offer_id":45613581467839,"sku":"783501154426","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71gwgEtmXAL.jpg?v=1777933213"},{"product_id":"stxaudio-stx-580tw-2-94-inch-super-tweeter-speaker-4-ohm-500w-max-power-103db-sensitivity-titanium-diaphragm-ccaw-voice-coil-for-pro-car-audio","title":"STXAudio STX-580TW 2.94\" Super Tweeter","description":"\u003cp\u003eThe STXAudio STX-580TW is a 2.94-inch super tweeter designed to add dedicated high-frequency output to a car-audio or professional audio speaker system. It is intended for listeners building a more detailed top end than a full-range or factory speaker setup can provide alone. With a 4-ohm nominal impedance, it is suited to systems using compatible external amplification or speaker channels.\u003c\/p\u003e\u003cp\u003eThis super tweeter is specified for a 3 kHz to 20 kHz frequency range, covering upper-frequency material such as vocal presence, percussion detail, and instrument overtones. Its 103 dB sensitivity rating indicates efficient output relative to input power. The result is a focused high-frequency driver meant to complement midrange and bass drivers rather than replace them.\u003c\/p\u003e\u003cp\u003eThe STX-580TW carries a 500-watt maximum power rating. Because a maximum rating is not the same as continuous RMS power handling, amplifier matching should be based on the amplifier's clean output, system crossover settings, and the complete speaker system. This approach helps keep the tweeter operating within an appropriate filtered frequency range.\u003c\/p\u003e\u003cp\u003eA titanium diaphragm is used for the high-frequency radiating surface, while the voice coil uses CCAW construction. These confirmed design details support a lightweight moving assembly for upper-frequency reproduction. The compact 2.94-inch format is useful where installation space is limited.\u003c\/p\u003e\u003cp\u003eThe STX-580TW is a practical addition for custom car-audio builds that need a dedicated high-frequency driver. It can be integrated with compatible mids, woofers, and an appropriately configured crossover or high-pass filter. Confirm available mounting space, system impedance, and amplifier configuration before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.94-Inch Super Tweeter:\u003c\/strong\u003e Compact high-frequency driver format for custom audio installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W Maximum Power:\u003c\/strong\u003e Supports systems designed for substantial peak power capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches many common car-audio amplifier and speaker configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e103 dB Sensitivity:\u003c\/strong\u003e Provides efficient output from a relatively compact driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium Diaphragm:\u003c\/strong\u003e Uses a lightweight, rigid diaphragm material for treble reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Uses copper-clad aluminum wire in the voice-coil construction.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe STX-580TW uses a compact super-tweeter layout with a titanium diaphragm and CCAW voice coil. Its 2.94-inch size helps it fit into installations where larger high-frequency drivers may not be practical. The product is specified as a super tweeter, so it is intended to work as part of a multi-driver system.\u003c\/p\u003e\u003cp\u003eInstall the tweeter securely in a location that preserves clearance and directs high-frequency output toward the listening area. Use a compatible 4-ohm amplifier channel or speaker network, and protect the driver with an appropriate high-pass crossover setting; no crossover frequency or included crossover is confirmed. Verify the mounting method, supplied accessories, and wiring requirements with the selling source before beginning the installation.\u003c\/p\u003e","brand":"STX AUDIO","offers":[{"title":"Default Title","offer_id":45613581598911,"sku":"783501154433","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71ncqmA20RL.jpg?v=1777933232"},{"product_id":"stxaudio-stx-600tw-3-71-inch-super-tweeter-speaker-4-ohm-1000w-max-power-105db-sensitivity-titanium-diaphragm-ccaw-voice-coil-for-pro-car-audio","title":"STX Audio STX-600TW 3.71\" Super Tweeter","description":"\u003cp\u003eThe STX Audio STX-600TW is a 3.71-inch super tweeter designed to add dedicated high-frequency output to a car audio system. It is intended for listeners building systems that need clearer treble presence alongside larger midrange speakers, subwoofers, or high-output bass sections. Its 4-ohm nominal impedance supports use with compatible car-audio amplification.\u003c\/p\u003e\u003cp\u003eThis model is built for the upper-frequency range, with a published frequency response of 2 kHz to 20 kHz. That makes it suited to reproducing details such as cymbals, vocal articulation, and other upper-register information that may be less prominent in bass-focused systems. The listed 105 dB sensitivity indicates efficient output relative to the power applied.\u003c\/p\u003e\u003cp\u003eA titanium diaphragm is used for the moving high-frequency element, while the voice coil is specified as CCAW, or copper-clad aluminum wire. These materials are identified in the published product information and are central to the STX-600TW's driver construction. The speaker is rated at up to 1000 watts maximum power handling.\u003c\/p\u003e\u003cp\u003eThe compact super-tweeter format makes the STX-600TW an option for custom car-audio installations where a dedicated treble driver is desired without using a full-size coaxial speaker. It can complement a system with separate mids and bass drivers by concentrating on the published 2 kHz to 20 kHz range. Proper system tuning remains important because this is a specialized high-frequency speaker rather than a full-range driver.\u003c\/p\u003e\u003cp\u003eFor an upgrade path, the STX-600TW is most appropriate in a properly designed multi-speaker system using compatible amplification and filtering. Its 4-ohm load should be matched to an amplifier channel that supports that impedance. Verify enclosure, mounting, crossover, and wiring requirements with the rest of the system before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.71-Inch Super Tweeter:\u003c\/strong\u003e Provides a compact dedicated driver for high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Nominal Impedance:\u003c\/strong\u003e Works with compatible 4-ohm car-audio amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1000W Maximum Rating:\u003c\/strong\u003e Published maximum power-handling specification for system matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e105 dB Sensitivity:\u003c\/strong\u003e Supports efficient high-frequency output with compatible amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium Diaphragm:\u003c\/strong\u003e Uses a titanium diaphragm for the high-frequency driver assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Uses copper-clad aluminum wire in the voice-coil construction.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe STX-600TW combines a titanium diaphragm with a CCAW voice coil in a compact 3.71-inch super-tweeter format. Published product information lists a compact magnet size of 1.30 x 0.39 x 0.28 inches. Its design is focused on dedicated high-frequency reproduction rather than full-range playback.\u003c\/p\u003e\u003cp\u003eMount the tweeters securely in a location that supports their 3.71-inch form factor and directs high-frequency sound toward the listening area. Use a compatible 4-ohm amplifier channel and an appropriate crossover or high-pass filter so the driver is used within its published 2 kHz to 20 kHz frequency range. Set amplifier gain conservatively and follow the instructions for the amplifier and any external crossover used in the installation.\u003c\/p\u003e","brand":"STX AUDIO","offers":[{"title":"Default Title","offer_id":45613581697215,"sku":"783501154440","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/716enupN6_L.jpg?v=1777933250"},{"product_id":"stx-audio-650c-6-5-inch-2-way-car-audio-component-speakers-system-6-1-2-inches","title":"STX Audio STX-650C 6.5\" 2-Way Component Speakers","description":"\u003cp\u003eThe STX Audio STX-650C is a 6.5-inch, 2-way car audio component speaker system designed as an upgrade from factory-installed speakers. It uses separate woofers, tweeters, and crossover networks to divide the audio signal between the drivers. This format is suited to vehicles with compatible 6.5-inch door or rear-deck speaker locations and separate tweeter mounting provisions.\u003c\/p\u003e\u003cp\u003eThe system is rated at 90 watts RMS per speaker, or 180 watts RMS for the pair. Published marketplace information also lists 325 watts maximum per speaker and 650 watts maximum for the pair. Its 4-ohm impedance is commonly compatible with aftermarket multichannel amplifiers and many factory speaker circuits.\u003c\/p\u003e\u003cp\u003eThe STX-650C combines a polypropylene-based woofer design with 1-inch balanced-dome tweeters. Published listings describe an IMPP cone with a carbon-fiber finish and butyl rubber surround, while also identifying an injection-molded polypropylene woofer and treated woven-cloth surround. Because these material descriptions vary between available listings, confirm the contents and finish of the specific package before installation.\u003c\/p\u003e\u003cp\u003eA separate 2-way crossover network is included in the published product details to route appropriate frequency ranges to the woofer and tweeter. The crossover is described as having a 12 dB-per-octave roll-off and ferro-fluid cooling. Surface- and flush-mount hardware is listed for the tweeters, offering flexibility when choosing their final location.\u003c\/p\u003e\u003cp\u003eThis component set can be used with a factory head unit or paired with a multichannel amplifier as part of a larger vehicle-audio upgrade. One listing recommends an amplifier rated at least 700 watts to maximize the system, though amplifier selection should also be based on stable power output at the speakers' 4-ohm load. Match mounting dimensions, wiring routes, crossover placement, and vehicle-specific adapters before purchasing.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Component System:\u003c\/strong\u003e Separate drivers and crossovers support a more flexible installation layout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e180-Watt RMS Pair Rating:\u003c\/strong\u003e Provides a published continuous-power rating for amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Fits common aftermarket car-audio amplifier configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Dome Tweeters:\u003c\/strong\u003e Dedicated high-frequency drivers handle upper-range reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded 2-Way Crossovers:\u003c\/strong\u003e Direct frequencies to the appropriate woofer and tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Tweeter Mounting:\u003c\/strong\u003e Included hardware supports surface or flush installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003ePublished product details identify a 6.5-inch woofer with a polypropylene-based cone construction and a 1-inch balanced-dome tweeter. The system is also listed with aluminum voice coils, an 8-ounce magnet, ferro-fluid cooling, and transparent 2-way crossover housings. Marketplace descriptions differ on certain woofer-cone and surround materials, so package contents should be verified before ordering.\u003c\/p\u003e\u003cp\u003eInstall the woofers in compatible 6.5-inch speaker openings and mount the tweeters using the supplied surface- or flush-mount hardware where appropriate. Place each crossover in a protected, dry location and wire it between the amplifier or head-unit output and its corresponding woofer and tweeter. Verify vehicle fitment, polarity, mounting depth, and available space for the crossover modules before beginning installation.\u003c\/p\u003e","brand":"STX AUDIO","offers":[{"title":"Default Title","offer_id":45613581828287,"sku":"783501106265","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/818lqBWgnWL.jpg?v=1777933275"}],"url":"https:\/\/nsidistributor.com\/collections\/speakers.oembed?page=3","provider":"NSI Audio Distributing","version":"1.0","type":"link"}