{"title":"Pioneer","description":null,"products":[{"product_id":"pioneer-ts-a1371f","title":"Pioneer TS-A1371F 5.25\" 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Pioneer TS-A1371F is a pair of 5.25-inch, 3-way coaxial car speakers designed for upgrading worn or limited factory speakers. Its compact format suits vehicles that use a 5.25-inch speaker location, subject to checking the mounting depth and cutout requirements. With a 4-ohm nominal impedance, these speakers are intended for standard automotive audio systems.\u003c\/p\u003e\u003cp\u003eThis A-Series model combines a woofer, midrange, and tweeter in each speaker to cover bass, vocal, and treble ranges from one mounting location. The 5.25-inch woofer uses a carbon- and mica-reinforced IMPP cone, while a cellulose-fiber midrange and PET hard-dome tweeter handle upper frequencies. This coaxial arrangement provides a practical way to add more defined frequency coverage without separate component-speaker placement.\u003c\/p\u003e\u003cp\u003eRated for 50 watts nominal power handling and 300 watts maximum power, the TS-A1371F is suited to systems that are matched appropriately for its 4-ohm load. Pioneer specifies a 44 Hz to 52 kHz frequency response and 89 dB sensitivity at 1W\/1m. Those specifications make it a sensible option for everyday music listening from a factory or aftermarket head unit, or an appropriately matched amplifier.\u003c\/p\u003e\u003cp\u003ePioneer's Open \u0026amp; Smooth sound concept is part of the A-Series design, focusing on broad sound dispersion for listening positions that are not directly in front of the speakers. The carbon- and mica-reinforced IMPP woofer cone is paired with a ferrite magnet structure. Together with the dedicated midrange and tweeter elements, the design is intended to maintain clear reproduction across the speaker's rated range.\u003c\/p\u003e\u003cp\u003eThe TS-A1371F can be used as a direct-size replacement where vehicle dimensions allow, or as part of a staged system upgrade with an aftermarket receiver or amplifier. Its 4.75-inch cutout requirement and 2.125-inch mounting depth should be compared with the vehicle's speaker opening before purchase. Speaker grilles are included for installations where the mounting location does not already provide protection.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer, midrange, and tweeter elements in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5.25-Inch Woofer:\u003c\/strong\u003e Fits many compact factory speaker locations after fitment verification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W Nominal Handling:\u003c\/strong\u003e Supports appropriately matched factory or aftermarket audio power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon \u0026amp; Mica IMPP Cone:\u003c\/strong\u003e Provides a rigid woofer diaphragm construction for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePET Hard-Dome Tweeter:\u003c\/strong\u003e Handles high-frequency detail within the coaxial speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen \u0026amp; Smooth Design:\u003c\/strong\u003e Supports broad sound dispersion for off-axis vehicle listening.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-A1371F uses a carbon- and mica-reinforced injection-molded polypropylene woofer cone, a cellulose-fiber midrange cone, and an 11 mm PET hard-dome tweeter. Pioneer specifies ferrite magnets and an included speaker grille. Each speaker measures 156 mm by 73 mm overall and weighs 0.70 kg.\u003c\/p\u003e\u003cp\u003eVerify the vehicle's opening, mounting pattern, and available clearance before installation. The required cutout is 121 mm (4.75 inches), and mounting depth is 54 mm (2.125 inches). Connect the speakers to a compatible 4-ohm car-audio channel, observe polarity, and match amplification to the 50-watt nominal power specification.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809476567231,"sku":"TS-A1371F","price":51.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61FF0h0PivL.jpg?v=1783109823"},{"product_id":"pioneer-ts-a1601c","title":"Pioneer TS-A1601C 6.5\" 2-Way Component Speakers","description":"\u003cp\u003eThe Pioneer TS-A1601C is a 6.5-inch, 2-way component speaker system designed to replace factory door speakers with separate woofers and tweeters. It provides a practical upgrade path for vehicles whose original speakers lack clarity, detail, or low-frequency presence. The set is rated for 80 watts RMS and 350 watts maximum power.\u003c\/p\u003e\u003cp\u003eThis component system is suited to listeners who want more focused front-stage sound than a coaxial speaker layout can provide. The separate 20 mm tweeters can be positioned independently from the 6.5-inch woofers to better suit the vehicle's interior layout. Its 4-ohm nominal impedance supports use with compatible factory radios or aftermarket amplification.\u003c\/p\u003e\u003cp\u003eThe TS-A1601C is engineered for a broad stated frequency response of 33 Hz to 58 kHz and a 90 dB sensitivity rating. Its carbon- and mica-reinforced IMPP woofer cone is designed for responsive bass reproduction, while the PEI hard-dome tweeter handles upper-frequency detail. An integrated in-line crossover network separates the woofer and tweeter frequency ranges.\u003c\/p\u003e\u003cp\u003ePioneer's Open \u0026amp; Smooth sound concept is intended to support smooth response and wide sound dispersion in automotive installations, where speaker placement is often off-axis. This matters in doors and dashboards, where speakers may not point directly toward the listener. The component layout helps create a more deliberate installation than a conventional full-range replacement speaker.\u003c\/p\u003e\u003cp\u003eMulti-fit woofer adapters are included to broaden mounting flexibility, and the kit also includes tweeter mounting provisions for surface, flush, and selected original-equipment locations. Confirm the vehicle's available space, mounting depth, cutout size, and wiring requirements before installation. The TS-A1601C can serve as a front-speaker upgrade in a factory-replacement system or as part of a more developed amplified system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Component System:\u003c\/strong\u003e Separate woofers and tweeters support flexible front-stage placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80W RMS Handling:\u003c\/strong\u003e Supports compatible factory or aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e350W Maximum Power:\u003c\/strong\u003e Provides headroom for dynamic musical peaks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon\/Mica IMPP Woofer:\u003c\/strong\u003e Reinforced cone supports responsive bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20mm PEI Dome Tweeter:\u003c\/strong\u003e Handles upper-frequency detail with a hard-dome design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Fit Adapters:\u003c\/strong\u003e Included adapters expand woofer mounting options.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe system uses 6.5-inch carbon- and mica-reinforced injection-molded polypropylene woofer cones with elastic-polymer surrounds. Its 20 mm polyetherimide hard-dome tweeters are separate from the woofers, allowing their location to be chosen according to the vehicle and installation goals. Speaker grilles are not included.\u003c\/p\u003e\u003cp\u003eVerify the 144 mm cutout requirement and 59 mm woofer mounting depth before ordering, as vehicle fitment is not guaranteed by size alone. Use the supplied crossover network with the component speakers, and follow polarity and connection guidance in the installation manual. The included adapters and tweeter mounting hardware can help accommodate different door and factory tweeter locations, but professional installation may be useful where vehicle-specific brackets or wiring adapters are required.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809476632767,"sku":"TS-A1601C","price":75.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61VXP77phVL.jpg?v=1783109826"},{"product_id":"pioneer-ts-a1671f","title":"Pioneer TS-A1671F 6.5\" 3-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Pioneer TS-A1671F is a pair of 6.5-inch, 3-way coaxial car speakers designed as a practical upgrade from worn or limited factory door speakers. Its full-range coaxial layout combines woofer, midrange, and tweeter drivers in each speaker, helping simplify an installation while covering a broad listening range. Multi-Fit installation adapters are included to support more flexible mounting in compatible vehicles.\u003c\/p\u003e\u003cp\u003eThese A-Series speakers are intended for drivers who want clearer everyday music playback without moving to a separate-component speaker system. With 70 watts nominal power handling, 320 watts maximum power handling, and a 4-ohm nominal impedance, they can be used in an appropriately matched factory-replacement or amplified system. Confirm vehicle opening dimensions, mounting depth, and wiring before purchase.\u003c\/p\u003e\u003cp\u003eThe TS-A1671F uses a 6.5-inch carbon- and mica-reinforced IMPP woofer cone with an elastic polymer surround. This construction is designed to provide controlled low-frequency output and durability in an automotive environment. A 42 mm midrange and 11 mm PET hard-dome tweeter handle upper-frequency detail within the coaxial assembly.\u003c\/p\u003e\u003cp\u003ePioneer rates the TS-A1671F for a 37 Hz to 31 kHz frequency response and 91 dB sensitivity at 1 watt\/1 meter. Those specifications support a balanced full-range presentation with useful output from modest power. The speaker also incorporates Pioneer’s Open \u0026amp; Smooth sound concept, focused on smooth driver transition and broad in-car sound staging.\u003c\/p\u003e\u003cp\u003eAs an upgrade path, these speakers can replace compatible 6.5-inch factory locations and can also be paired with a 4-ohm-capable aftermarket amplifier within their nominal power rating. Included grilles provide an option for custom or exposed installations where a vehicle does not retain an OEM speaker grille. They are also compatible with Pioneer’s CarSoundFit listening simulator app.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial System:\u003c\/strong\u003e Integrates woofer, midrange, and tweeter drivers in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70W Nominal Power:\u003c\/strong\u003e Supports use with appropriately matched factory or amplified systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon\/Mica IMPP Woofer:\u003c\/strong\u003e Reinforced cone construction supports controlled bass response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e42 mm Midrange:\u003c\/strong\u003e Adds dedicated coverage for important vocal and instrument frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e11 mm PET Tweeter:\u003c\/strong\u003e Handles upper-frequency detail with a hard-dome design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Fit Adapters:\u003c\/strong\u003e Included adapters add mounting flexibility for compatible vehicle locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-A1671F uses an iron pressed-plate woofer basket, ferrite woofer magnet, elastic polymer surround, and carbon- and mica-reinforced injection-molded polypropylene woofer cone. Its midrange uses a cellulose-fiber diaphragm, while the tweeter is an 11 mm PET hard dome. Copper voice-coil wire and a glass-imide voice-coil bobbin are also specified.\u003c\/p\u003e\u003cp\u003eVerify that the vehicle has a compatible 6.5-inch speaker location, a 144 mm cutout, and at least 48 mm of mounting depth before installation. Use the supplied Multi-Fit adapters only where they match the vehicle mounting location, and ensure the speaker terminals and wiring cannot contact vehicle metal. For amplified systems, use a 4-ohm-compatible amplifier and set gain conservatively to avoid speaker distortion.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809476731071,"sku":"TS-A1671F","price":51.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71DMk8zqErL.jpg?v=1783109832"},{"product_id":"pioneer-ts-a1681f","title":"Pioneer TS-A1681F 6.5\" 4-Way Coaxial Speakers","description":"\u003cp\u003eThe Pioneer TS-A1681F is a pair of 6.5-inch, 4-way coaxial car speakers designed for replacing compatible factory speakers. Its all-in-one coaxial layout combines a woofer, midrange, tweeter, and super tweeter in each speaker. This makes it a practical option for drivers seeking fuller frequency coverage from a factory-style speaker location.\u003c\/p\u003e\u003cp\u003eWith 80 watts RMS continuous power handling and 350 watts maximum music power, the TS-A1681F is suited to systems using a factory radio or an appropriately matched aftermarket amplifier. Its 4-ohm nominal impedance is common for aftermarket car-speaker installations. A 91 dB sensitivity rating helps it produce useful output without requiring unusually high input power.\u003c\/p\u003e\u003cp\u003ePioneer rates the TS-A1681F for a 35 Hz to 29 kHz frequency response at -20 dB. The 6.5-inch carbon- and mica-reinforced IMPP woofer is intended to provide responsive low-frequency performance, while the PEI midrange and PET dome high-frequency drivers handle upper frequencies. The result is a full-range coaxial design that can cover bass, midrange, treble, and upper-treble duties from one mounting position.\u003c\/p\u003e\u003cp\u003eThe speaker uses Pioneer's Open \u0026amp; Smooth sound concept, which is designed for smooth response and broad dispersion in off-axis vehicle listening positions. An optimized symmetrical motor design with a large magnet supports the woofer assembly. These engineering elements are intended to suit the challenging acoustics of door, rear-deck, and other factory speaker locations.\u003c\/p\u003e\u003cp\u003ePioneer includes Multi-Fit adapters to expand mounting flexibility in compatible vehicles. The speakers have a 5-5\/8-inch cutout requirement and a 2-3\/8-inch mounting depth, so vehicle-specific clearance should be verified before installation. They can serve as a straightforward full-range upgrade in a stock system or as part of a larger system built around an aftermarket receiver or amplifier.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Way Coaxial System:\u003c\/strong\u003e Combines woofer, midrange, tweeter, and super tweeter drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80W RMS Handling:\u003c\/strong\u003e Supports continuous power handling of 80 watts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e350W Maximum Power:\u003c\/strong\u003e Provides 350 watts maximum music power handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon-Mica IMPP Woofer:\u003c\/strong\u003e Uses a reinforced 6.5-inch polypropylene woofer cone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePET Dome High Frequencies:\u003c\/strong\u003e Includes 11 mm tweeter and super tweeter drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Fit Adapters:\u003c\/strong\u003e Included adapters broaden mounting options in compatible vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-A1681F uses a carbon- and mica-reinforced injection-molded polypropylene woofer cone, an elastic-polymer woofer surround, and a ferrite woofer magnet. Its 42 mm PEI cone midrange is paired with 11 mm PET hard-dome tweeter and super tweeter drivers. Grilles are included to provide a finished appearance where exposed-speaker installation is appropriate.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's available mounting depth, cutout size, mounting-hole pattern, and factory grille clearance before purchase. The speaker requires a 144 mm (5-5\/8-inch) cutout and 59 mm (2-3\/8-inch) mounting depth. Use the included Multi-Fit adapters where suitable, and connect the speakers to audio equipment designed for 4-ohm speaker loads.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809476763839,"sku":"TS-A1681F","price":62.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71AJEjaek3L.jpg?v=1783109835"},{"product_id":"pioneer-ts-a2500lb","title":"Pioneer TS-A2500LB 10\" Shallow-Mount Loaded Subwoofer","description":"\u003cp\u003eThe Pioneer TS-A2500LB is a 10-inch shallow-mount loaded subwoofer enclosure designed to add low-frequency output where installation depth is limited. Its compact sealed enclosure helps make bass reinforcement practical in many trunks, cargo areas, and standard- or extended-cab pickup applications. Because the driver is already installed in its enclosure, it avoids the need to select and build a separate subwoofer box.\u003c\/p\u003e\u003cp\u003eThis is a passive subwoofer system, so it is intended to connect to a separate external amplifier rather than directly to a head unit's speaker outputs. With 300 watts RMS power handling and a 2-ohm single voice coil, it is suited to a properly matched mono amplifier channel. Pioneer recommends using an amplifier with continuous RMS output below the subwoofer's 300-watt nominal input rating.\u003c\/p\u003e\u003cp\u003eThe TS-A2500LB uses a glass-fiber- and mica-reinforced injection-molded polypropylene cone, commonly called IMPP, to provide a rigid diaphragm for bass reproduction. A rubber surround and aramid-fiber dual-spider design support controlled cone movement. The sealed enclosure design is intended for a compact installation and a controlled bass character.\u003c\/p\u003e\u003cp\u003eIts low-profile cabinet measures 20.875 inches wide, 11.750 inches high, and 5.875 inches deep, allowing placement where a conventional deep subwoofer enclosure may not fit. The enclosure can be installed upright, flat with the driver facing upward, or in a down-firing arrangement. Removable feet and cushions support those different placement options.\u003c\/p\u003e\u003cp\u003eThe TS-A2500LB can be used as the bass foundation of an A-Series speaker upgrade or added to another car audio system that has an appropriate amplifier and subwoofer signal path. Pioneer specifies a 2-ohm nominal impedance, so amplifier compatibility should be checked before installation. A low-pass filter is recommended, with Pioneer identifying 80 Hz at 12 dB per octave as an effective setting.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-Loaded Sealed Enclosure:\u003c\/strong\u003e Includes the installed 10-inch subwoofer and enclosure for a simplified bass upgrade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Handling:\u003c\/strong\u003e Supports use with a suitably matched external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Single Voice Coil:\u003c\/strong\u003e Provides a fixed 2-ohm nominal load for compatible amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced IMPP Cone:\u003c\/strong\u003e Uses glass-fiber and mica reinforcement for cone rigidity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow Cabinet:\u003c\/strong\u003e The 5.875-inch-deep enclosure helps fit restricted spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Orientation:\u003c\/strong\u003e Can be mounted upright, upward-firing, or down-firing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-A2500LB combines a carpeted enclosure with an embroidered Pioneer logo, a fully covered steel mesh grille, and a 10-inch woofer using a reinforced IMPP cone. Its rubber surround, aramid-fiber dual-spider design, stamped-steel basket, and ferrite magnet are part of the subwoofer construction. The carpeted surface is intended to resist slipping and protect surrounding surfaces from scratches.\u003c\/p\u003e\u003cp\u003eConnect this passive enclosure to an external amplifier using speaker cable thicker than AWG 18; speaker wire is not supplied. Pioneer recommends a low-pass filter at 80 Hz with a 12 dB-per-octave slope, and the enclosure should be securely mounted using the included hardware as appropriate for the vehicle. Four threaded feet, four adhesive cushions, two angle brackets, and eight mounting screws are included for installation flexibility.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809476796607,"sku":"TS-A2500LB","price":141.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/819XjtCjCoL.jpg?v=1783109838"},{"product_id":"pioneer-ts-a2500ls4","title":"Pioneer TS-A2500LS4 10\" Shallow-Mount Subwoofer","description":"\u003cp\u003eThe Pioneer TS-A2500LS4 is a 10-inch shallow-mount component subwoofer designed to add low-frequency output where conventional deep subwoofers may not fit. Its compact 87 mm mounting depth supports installations in space-limited locations such as behind seats or in slim custom enclosures. This passive subwoofer requires an external amplifier and enclosure for operation. It is a practical choice for vehicle owners building a bass upgrade without dedicating a large amount of cabin or cargo space.\u003c\/p\u003e\u003cp\u003eWith 300 watts RMS power handling and 1,200 watts maximum music power handling, the TS-A2500LS4 is intended for systems matched to a properly configured amplifier. Its single 4-ohm voice coil provides a straightforward load for compatible mono or bridged amplifier channels. The 85 dB sensitivity rating and 20 Hz to 900 Hz frequency response describe its operating characteristics. Careful amplifier gain adjustment and crossover setup are important for clean integration with full-range speakers.\u003c\/p\u003e\u003cp\u003eThe woofer uses a glass-fiber and mica-reinforced injection-molded polypropylene cone. This rigid cone construction is paired with a rubber surround to support controlled cone movement during bass reproduction. A double-reinforced spider helps stabilize the moving assembly. Together, these components are designed for the demands of compact subwoofer installation.\u003c\/p\u003e\u003cp\u003eThe TS-A2500LS4 is part of Pioneer’s A-Series lineup and is designed to complement Pioneer A-Series full-range speakers. It can be used in a dedicated subwoofer system with an aftermarket amplifier, appropriate power wiring, and a low-pass crossover. The single-voice-coil design makes system planning simpler than multi-coil wiring configurations. It is suitable for listeners seeking added bass presence while retaining useful vehicle space.\u003c\/p\u003e\u003cp\u003eInstallation flexibility is a central part of this model’s design. The subwoofer has a 230 mm cutout requirement, a 267 mm overall diameter, and a 103 mm overall height. Pioneer provides sealed and ported enclosure guidance, including a recommended 17.0-liter enclosure volume. Confirm available clearance, enclosure volume, amplifier compatibility, and wiring before beginning installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow-Mount Profile:\u003c\/strong\u003e The 87 mm mounting depth helps accommodate compact enclosure locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Handling:\u003c\/strong\u003e Supports amplifier matching based on continuous power, not peak power alone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 4-Ohm Voice Coil:\u003c\/strong\u003e Provides a simple, consistent impedance load for compatible amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced IMPP Cone:\u003c\/strong\u003e Glass-fiber and mica reinforcement adds rigidity to the polypropylene cone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Reinforced Spider:\u003c\/strong\u003e Helps support controlled movement of the woofer assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Enclosure Options:\u003c\/strong\u003e Manufacturer guidance is provided for sealed and ported enclosures.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-A2500LS4 combines a glass-fiber and mica-reinforced IMPP cone, rubber surround, ferrite magnet, Kapton voice-coil bobbin, copper voice-coil wire, ABS dust cap, and steel basket. Its compact chassis measures 267 mm in diameter and 103 mm in overall height. The subwoofer uses push terminals and a single voice coil. A trim ring and six mounting screws are shown in the installation documentation.\u003c\/p\u003e\u003cp\u003eMount the subwoofer in a rigid enclosure with a 230 mm cutout and at least 87 mm of mounting-depth clearance. For a sealed installation, Pioneer specifies 17.0 liters as the recommended enclosure volume, with a stated range of 9.9 to 19.8 liters. For a ported enclosure, Pioneer specifies 17.0 liters with one 76 mm by 191 mm port; use a compatible external amplifier, set an appropriate low-pass crossover, and verify polarity before final assembly.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809476862143,"sku":"TS-A2500LS4","price":109.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61UWjQ--vQL.jpg?v=1783109842"},{"product_id":"pioneer-ts-a3000ls4","title":"Pioneer TS-A3000LS4 12\" Shallow-Mount Subwoofer","description":"\u003cp\u003eThe Pioneer TS-A3000LS4 is a 12-inch shallow-mount component subwoofer designed for vehicle audio systems where installation depth is limited. Its low-profile design helps make room for bass in trucks, coupes, sedans, and other applications that cannot accommodate a conventional deep subwoofer. It is a passive subwoofer, so it requires an external amplifier and a properly designed enclosure.\u003c\/p\u003e\u003cp\u003eWith 400 watts RMS power handling and 1,500 watts maximum power handling, the TS-A3000LS4 is intended for a moderate-power bass upgrade. Its 4-ohm single voice coil provides a straightforward load for a compatible mono or bridged amplifier. The rated frequency response extends from 20 Hz to 1 kHz, supporting low-frequency reproduction in a complete speaker system.\u003c\/p\u003e\u003cp\u003eThe woofer uses Pioneer’s Glass Fiber and Mica Reinforced IMPP composite cone. This cone is paired with a rubber surround and an aramid-fiber dual-spider design to support controlled cone movement. A ferrite magnet motor and extended voice-coil structure support the shallow mounting profile.\u003c\/p\u003e\u003cp\u003eAt just 3.5 inches of mounting depth, this subwoofer is made for installations where enclosure space and clearance are important considerations. Pioneer specifies a 0.8 cubic-foot sealed enclosure as the recommended enclosure volume. The compact depth can be useful for custom enclosures behind seats or in limited cargo areas.\u003c\/p\u003e\u003cp\u003eThe TS-A3000LS4 fits into a system built around an aftermarket head unit, amplifier, enclosure, and full-range speakers. Its 88 dB sensitivity rating and 4-ohm configuration help simplify amplifier selection when power is matched appropriately. It can also be paired with other Pioneer A-Series speakers as part of a coordinated vehicle audio upgrade.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow-Mount 12-Inch Design:\u003c\/strong\u003e Uses a 3.5-inch mounting depth for installations with limited available space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400W RMS Power Handling:\u003c\/strong\u003e Supports continuous amplifier power up to its 400-watt nominal rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Single Voice Coil:\u003c\/strong\u003e Provides a simple, fixed impedance load for a compatible external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced IMPP Cone:\u003c\/strong\u003e Glass fiber and mica reinforcement adds rigidity to the polypropylene composite cone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Spider Suspension:\u003c\/strong\u003e Aramid-fiber dual spiders help maintain controlled woofer movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed-Enclosure Recommendation:\u003c\/strong\u003e Designed around a recommended 0.8 cubic-foot sealed enclosure volume.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-A3000LS4 combines a Glass Fiber and Mica Reinforced IMPP composite cone with a rubber surround, aramid-fiber dual-spider suspension, and ferrite magnet. Its shallow basket profile measures 318 mm in overall diameter and 109 mm in overall depth. The speaker uses 8-AWG push terminals and accepts an optional Pioneer UD-12GL grille, sold separately.\u003c\/p\u003e\u003cp\u003ePlan for an approximately 11-1\/8-inch cutout and 3.5 inches of mounting depth, while allowing extra clearance for wiring and cone movement. Pioneer recommends a 0.8 cubic-foot sealed enclosure; the product information also identifies a 0.5 to 1.0 cubic-foot small-enclosure range. Use a compatible external amplifier rated appropriately for a 4-ohm subwoofer, and have the enclosure, amplifier wiring, and installation hardware ready before installation.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809476894911,"sku":"TS-A3000LS4","price":116.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/613gsf42F0L.jpg?v=1783109845"},{"product_id":"pioneer-ts-a301d4","title":"Pioneer TS-A301D4 12\" Dual 4-Ohm Car Subwoofer","description":"\u003cp\u003eThe Pioneer TS-A301D4 is a 12-inch component car subwoofer designed to add low-frequency output to a compatible vehicle audio system. Its dual 4-ohm voice coils provide flexible wiring options for installers building a single-subwoofer or multi-subwoofer setup. It is intended for use with an external amplifier and a properly sized enclosure.\u003c\/p\u003e\u003cp\u003eWith 500 watts RMS continuous power handling and 1,600 watts maximum music power, this subwoofer is suited to systems that need a dedicated bass driver rather than relying on full-range speakers alone. Its specified frequency response extends from 20 Hz to 1.6 kHz, covering the low-bass range commonly assigned to a subwoofer. A 92 dB sensitivity rating helps it produce useful output with appropriately matched amplification.\u003c\/p\u003e\u003cp\u003eThe TS-A301D4 uses a two-piece Honeycomb IMPP composite cone structure with a rigid drive cone. This construction is designed to retain cone rigidity while helping control distortion at higher output levels. A dual-layer, fiber-reinforced elastic polymer surround and red spider support stable, linear cone movement.\u003c\/p\u003e\u003cp\u003ePioneer equips this model with a 90-ounce double-stacked magnet assembly and a long voice coil on an aluminum bobbin. The reinforced steel basket is designed to support the motor assembly and maintain accurate cone motion. Its enclosed lower basket structure also helps limit unnecessary vibration that can affect bass reproduction.\u003c\/p\u003e\u003cp\u003eThis subwoofer works well as part of a system upgrade with an external mono amplifier, suitable subwoofer wiring, and a dedicated sealed or ported enclosure. Pioneer lists a 1.25-cubic-foot sealed enclosure as the recommended volume, while a 1.5-cubic-foot ported enclosure is the recommended vented option. Check amplifier load capability, enclosure clearance, and the 11-1\/8-inch cutout requirement before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Inch Subwoofer:\u003c\/strong\u003e Adds dedicated bass capability to a vehicle audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Handling:\u003c\/strong\u003e Supports continuous power in properly matched amplified systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Allow multiple wiring configurations for compatible amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHoneycomb IMPP Cone:\u003c\/strong\u003e Provides a rigid composite cone structure for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90-Ounce Double-Stack Magnet:\u003c\/strong\u003e Supplies the motor strength behind the woofer assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced Steel Basket:\u003c\/strong\u003e Helps support the motor and reduce unwanted vibration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-A301D4 combines a Honeycomb IMPP composite cone, rigid drive cone, dual-layer fiber-reinforced elastic polymer surround, red spider, aluminum-bobbin voice coil, and reinforced steel basket. Its 90-ounce double-stacked magnet is paired with a firmly enclosed lower basket section. These elements are engineered to support controlled excursion and durable operation in a car-audio enclosure.\u003c\/p\u003e\u003cp\u003eInstall the subwoofer in a dedicated enclosure with an 11-1\/8-inch cutout and at least 6-1\/8 inches of mounting-depth clearance. Pioneer specifies 1.25 cubic feet for a recommended sealed enclosure or 1.5 cubic feet for a recommended ported enclosure using one 3-inch-diameter by 6.5-inch-long port. Both voice coils must be connected to the amplifier; select series, parallel, or stereo wiring only after confirming the amplifier's supported impedance load.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809476927679,"sku":"TS-A301D4","price":80.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61nqJQgqPIL.jpg?v=1783109848"},{"product_id":"pioneer-ts-a301tw","title":"Pioneer TS-A301TW 0.75\" Component Dome Tweeters","description":"\u003cp\u003eThe Pioneer TS-A301TW is a pair of 20 mm component dome tweeters designed to add dedicated high-frequency reproduction to a car audio system. They are suited to listeners who want clearer treble detail than a full-range factory speaker location may provide. An included inline high-pass network is specified for use with the tweeters to help direct appropriate frequencies to the drivers.\u003c\/p\u003e\u003cp\u003eEach tweeter uses a polyetherimide (PEI) hard-dome diaphragm and a neodymium magnet. This combination is designed for controlled high-frequency output in a compact package. With a stated frequency response extending from 1.8 kHz to 58 kHz, the TS-A301TW is intended to reproduce upper-midrange and treble information.\u003c\/p\u003e\u003cp\u003eThe TS-A301TW is rated for 100 watts RMS and 450 watts maximum music power, with ratings specified as equivalent to 4 ohms. Its 90 dB sensitivity rating is measured at 1 watt\/1 meter. The nominal impedance is 6 ohms, so amplifier and speaker-system compatibility should be considered before installation.\u003c\/p\u003e\u003cp\u003eThese tweeters are a practical add-on for systems that need more high-frequency presence from the front stage. They can complement compatible midrange or full-range speakers when installed with the supplied network. The 3,800 Hz crossover frequency helps define where the dedicated tweeter begins its intended operating range.\u003c\/p\u003e\u003cp\u003ePioneer includes Multi-Fit installation adapters to support different mounting approaches and applicable original-equipment tweeter locations. The package also includes mounting hardware, brackets, wire adapters, and inline networks. This makes the TS-A301TW well suited to a component-style upgrade where vehicle space and mounting depth have been checked in advance.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 mm PEI Dome:\u003c\/strong\u003e A hard-dome tweeter diaphragm handles detailed upper frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W RMS Rating:\u003c\/strong\u003e Supports systems with appropriately matched amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e450W Maximum Power:\u003c\/strong\u003e Provides a stated maximum music-power handling figure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.8 kHz–58 kHz Response:\u003c\/strong\u003e Covers upper-midrange and high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInline High-Pass Network:\u003c\/strong\u003e Helps route suitable frequencies to each tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Fit Adapters:\u003c\/strong\u003e Supports flexible mounting in compatible vehicle locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-A301TW uses a 20 mm PEI hard-dome diaphragm paired with a neodymium magnet. Each tweeter has a compact 50 mm outside diameter and a stated 16 mm mounting depth. No speaker grilles are included.\u003c\/p\u003e\u003cp\u003eUse the included inline high-pass network; Pioneer cautions against operating the tweeter independently of its specified network. Confirm the available mounting space, 38 mm cutout requirement, and vehicle-specific wiring before installation. The supplied adapters, brackets, wire adapters, foam gaskets, covers, clips, and screws support several installation arrangements.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809476960447,"sku":"TS-A301TW","price":31.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61xPVAGOIUL.jpg?v=1783109851"},{"product_id":"pioneer-ts-a30s4","title":"Pioneer TS-A30S4 12\" Component Subwoofer","description":"\u003cp\u003eThe Pioneer TS-A30S4 is a 12-inch passive component subwoofer designed to add dedicated low-frequency output to a car audio system. It is intended for listeners who want more bass presence than factory speakers or full-range aftermarket speakers can provide on their own. Because it is a passive subwoofer, it requires a separate compatible external amplifier and enclosure.\u003c\/p\u003e\u003cp\u003eWith 400 watts RMS power handling and 1,400 watts maximum power handling, the TS-A30S4 is suited to systems built around a properly matched mono or bridged amplifier. Its single 4-ohm voice coil provides a straightforward load for compatible amplification. The 87 dB sensitivity rating and 22 Hz to 1.6 kHz frequency range support use as a dedicated bass driver.\u003c\/p\u003e\u003cp\u003eThe woofer uses Pioneer’s glass-fiber and mica-reinforced injection-molded polypropylene cone. This rigid composite cone is paired with an elastic polymer\/butyl-rubber surround and a polycotton spider assembly. Together, these components are designed to support controlled cone movement during bass playback.\u003c\/p\u003e\u003cp\u003eThe TS-A30S4 is part of Pioneer’s A-Series range and can be paired with A-Series full-range speakers as part of a coordinated vehicle upgrade. It provides the low-end foundation while the main speakers handle midrange and high-frequency detail. An amplifier with appropriate crossover settings helps direct bass frequencies to the subwoofer.\u003c\/p\u003e\u003cp\u003eInstallation flexibility comes from support for sealed or vented enclosures. Pioneer specifies a 1.25 cubic foot sealed enclosure or a 1.5 cubic foot vented enclosure, allowing the system to be tailored for available space and enclosure preference. Confirm cutout, mounting depth, enclosure volume, and amplifier compatibility before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Inch Component Subwoofer:\u003c\/strong\u003e Adds dedicated bass output to a custom car audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400W RMS Handling:\u003c\/strong\u003e Supports amplifier matching around its continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 4-Ohm Voice Coil:\u003c\/strong\u003e Provides straightforward wiring with compatible external amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIMPP Composite Cone:\u003c\/strong\u003e Uses glass-fiber and mica-reinforced polypropylene construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e22 Hz–1.6 kHz Range:\u003c\/strong\u003e Covers low bass through upper bass frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Or Vented Compatibility:\u003c\/strong\u003e Supports manufacturer-specified enclosure options for system planning.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-A30S4 combines a glass-fiber and mica-reinforced IMPP cone with a ferrite magnet, elastic polymer\/butyl-rubber surround, and polycotton spider. Its single voice coil uses an aluminum bobbin, while push terminals provide the speaker-wire connection. The driver has a 318 mm outside diameter and a 281 mm cutout requirement.\u003c\/p\u003e\u003cp\u003ePlan for a 136 mm mounting depth behind the mounting surface and use the supplied gasket when installing the driver. A sealed enclosure of 35.4 L (1.25 cu. ft.) or a vented enclosure of 42.5 L (1.5 cu. ft.) is recommended. Use an external amplifier compatible with a 4-ohm load, set gain carefully, and apply a suitable low-pass crossover for subwoofer duty.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809476993215,"sku":"TS-A30S4","price":52.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71q4-gjlLbL.jpg?v=1783109854"},{"product_id":"pioneer-ts-a4671f","title":"Pioneer TS-A4671F 4\" x 6\" 4-Way Coaxial Speakers","description":"\u003cp\u003eThe Pioneer TS-A4671F is a pair of 4\" x 6\" four-way coaxial car speakers designed to replace compatible factory speakers. It provides a practical upgrade path for vehicles whose original speakers sound worn, limited, or unclear. Its 4-ohm design works with many factory and aftermarket car stereos, subject to vehicle fitment and wiring compatibility.\u003c\/p\u003e\u003cp\u003eEach speaker combines a 4\" x 6\" woofer, 42 mm midrange, 11 mm tweeter, and 11 mm super tweeter in one coaxial assembly. This multi-driver layout is intended to distribute low, middle, and high frequency reproduction among dedicated drivers. The result is a broad stated frequency response from 34 Hz to 49 kHz.\u003c\/p\u003e\u003cp\u003eThe TS-A4671F is rated for 30 watts RMS and up to 210 watts maximum power handling. Its 88 dB sensitivity rating supports use with modest-power factory radios while leaving room for a properly matched external amplifier. The nominal 4-ohm impedance is a common match for car-audio speaker outputs.\u003c\/p\u003e\u003cp\u003ePioneer uses a carbon- and mica-reinforced injection-molded polypropylene woofer cone to balance low mass with rigidity. A cellulose-fiber cone serves the midrange, while PET hard-dome drivers handle the tweeter and super-tweeter duties. The A-Series Open \u0026amp; Smooth concept is designed to support a more consistent off-axis response in vehicle interiors.\u003c\/p\u003e\u003cp\u003eThese speakers are suited to a stock-location replacement where a 4\" x 6\" opening is available and mounting clearance has been verified. They can be used with a factory head unit or as part of a larger system that adds an amplifier and compatible source unit. Confirm the cutout, mounting depth, terminal clearance, and vehicle-specific mounting pattern before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Way Coaxial Layout:\u003c\/strong\u003e Integrates woofer, midrange, tweeter, and super tweeter drivers in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30W RMS Handling:\u003c\/strong\u003e Supports everyday use with factory radios or matched amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e210W Maximum Power:\u003c\/strong\u003e Provides short-term peak power handling capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon\/Mica IMPP Woofer:\u003c\/strong\u003e Uses a reinforced polypropylene cone for controlled cone movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen \u0026amp; Smooth Design:\u003c\/strong\u003e Supports more consistent off-axis response in vehicle interiors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches the common impedance used by many car audio systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-A4671F uses an iron-plate pressed basket, a carbon- and mica-reinforced IMPP woofer cone, a cellulose-fiber midrange diaphragm, and PET hard-dome high-frequency drivers. Its woofer uses a ferrite magnet, while the tweeter assembly uses neodymium magnet material. Additional construction details include an aramid-fiber damper, rolled rubber-coated cloth surround, glass-imide voice-coil bobbin, and copper-clad aluminum voice-coil wire.\u003c\/p\u003e\u003cp\u003eVerify that the vehicle accepts a 4\" x 6\" speaker with a 95 x 153 mm cutout and 42 mm mounting depth. Connect the speakers to compatible 4-ohm speaker outputs and ensure the leads and terminals cannot contact metal. The package includes mounting-related accessories, but vehicle-specific adapters or wiring harnesses may still be needed depending on the application.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809477025983,"sku":"TS-A4671F","price":51.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61aosgsexAL.jpg?v=1783109857"},{"product_id":"pioneer-ts-a6881f","title":"Pioneer TS-A6881F 6\" x 8\" 4-Way Coaxial Speakers","description":"\u003cp\u003eThe Pioneer TS-A6881F is a pair of 6 x 8-inch coaxial car speakers designed as a practical replacement for factory-installed door or rear-deck speakers. Its four-way layout combines a large woofer with dedicated midrange, tweeter, and super tweeter drivers in each speaker assembly. This design gives an installer a full-range speaker solution without separately mounting external crossover components or tweeters.\u003c\/p\u003e\u003cp\u003eWith 80 watts RMS continuous power handling and 350 watts maximum music power, the TS-A6881F is suited to factory radios as well as appropriately matched aftermarket amplification. Its 4-ohm nominal impedance is common in automotive audio systems, helping it integrate with many compatible head units and amplifiers. The 90 dB sensitivity rating supports useful output from modest power levels.\u003c\/p\u003e\u003cp\u003eThe speaker uses a carbon- and mica-reinforced IMPP woofer cone, a material selected for rigidity and low weight. A 42 mm cellulose-fiber midrange helps cover the middle frequencies, while PET hard-dome high-frequency drivers handle upper detail. The stated 30 Hz to 32 kHz frequency response provides broad full-range coverage for everyday music listening.\u003c\/p\u003e\u003cp\u003eAs a coaxial four-way design, the TS-A6881F places multiple driver elements together in one 6 x 8-inch speaker location. This can simplify an upgrade where the vehicle has limited room for separate component speakers. Pioneer also lists its Open \u0026amp; Smooth sound concept and CarSoundFit compatibility for this A-Series model.\u003c\/p\u003e\u003cp\u003eThe TS-A6881F is intended for vehicles that can accommodate its 6 x 8-inch frame and mounting requirements. Before ordering, compare the vehicle's factory speaker opening, 133 x 191 mm cutout requirement, and available mounting depth with the speaker's measurements. For a complete system upgrade, it can be paired with compatible source electronics, wiring adapters, and amplification selected for its 4-ohm load and 80-watt RMS rating.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Way Coaxial System:\u003c\/strong\u003e Combines woofer, midrange, tweeter, and super tweeter elements in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80W RMS Power Handling:\u003c\/strong\u003e Supports continuous power handling for compatible factory or aftermarket systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e350W Maximum Music Power:\u003c\/strong\u003e Provides additional short-term power-handling capacity during dynamic musical passages.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon\/Mica IMPP Woofer:\u003c\/strong\u003e Uses a reinforced polypropylene cone for the 6 x 8-inch woofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePET High-Frequency Drivers:\u003c\/strong\u003e Hard-dome tweeter and super tweeter elements reproduce upper-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches the nominal impedance commonly used by car audio equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-A6881F uses a carbon- and mica-reinforced injection-molded polypropylene woofer cone, elastic-polymer surround, and ferrite magnet. Its 42 mm midrange uses a cellulose-fiber cone, while the tweeter and super tweeter use PET hard domes. The speakers are supplied as a pair and do not include protective grilles.\u003c\/p\u003e\u003cp\u003eConfirm fitment before installation by measuring the factory opening and available depth. Pioneer specifies a 133 x 191 mm cutout and 62 mm mounting depth; the manual also identifies eight included 4 x 25 mm mounting screws. Connect each speaker to a compatible 4-ohm car-audio channel, observe polarity, and ensure speaker leads and terminals cannot contact vehicle metal.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809477058751,"sku":"TS-A6881F","price":51.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61m9nozPB2L.jpg?v=1783109860"},{"product_id":"pioneer-ts-a6961f","title":"Pioneer TS-A6961F 6x9\" 4-Way Coaxial Speakers","description":"\u003cp\u003eThe Pioneer TS-A6961F is a pair of 6 x 9-inch A-Series four-way coaxial car speakers designed as a direct full-range speaker upgrade. They combine a woofer, midrange, tweeter, and super tweeter in each speaker assembly to cover a broad range of music detail. This format is well suited to replacing worn factory 6 x 9-inch speakers while retaining a straightforward installation approach.\u003c\/p\u003e\u003cp\u003eWith 90 watts RMS and 450 watts maximum power handling, the TS-A6961F can work with a compatible factory or aftermarket head unit and can also be paired with appropriately matched external amplification. Its 4-ohm nominal impedance is common for car audio speaker systems. The 92 dB sensitivity rating supports useful output from moderate-power sources.\u003c\/p\u003e\u003cp\u003eThe speaker uses a carbon- and mica-reinforced IMPP woofer cone for its low-frequency section, paired with a cellulose-fiber cone midrange. An 18 mm PET hard-dome tweeter and 11 mm PET hard-dome super tweeter handle upper-frequency reproduction. Together, the four-way coaxial layout is intended to provide full-range sound from a single mounting location.\u003c\/p\u003e\u003cp\u003ePioneer's Open \u0026amp; Smooth sound concept is designed to support a more consistent transition between the midrange and high-frequency drivers in automotive listening positions. This is useful in vehicle cabins, where speakers are commonly mounted off-axis from the listener. The published frequency response spans 29 Hz to 28 kHz at -20 dB.\u003c\/p\u003e\u003cp\u003eFor an upgrade path, the TS-A6961F can serve as a replacement for compatible 6 x 9-inch door, rear-deck, or cargo-area speaker locations. Pioneer includes Multi-Fit adapters to broaden mounting flexibility, along with speaker grilles. Confirm the vehicle's opening, mounting depth, wiring, and factory mounting provisions before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Way Coaxial System:\u003c\/strong\u003e Combines woofer, midrange, tweeter, and super tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90W RMS Handling:\u003c\/strong\u003e Supports amplifier matching based on continuous power capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon\/Mica IMPP Woofer:\u003c\/strong\u003e Reinforced polypropylene cone handles the woofer frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePET Hard-Dome Highs:\u003c\/strong\u003e Separate tweeter and super tweeter reproduce upper-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e29 Hz–28 kHz Response:\u003c\/strong\u003e Covers a broad published frequency range at -20 dB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Fit Adapters Included:\u003c\/strong\u003e Helps accommodate compatible mounting locations and installation layouts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-A6961F uses a metal basket, carbon- and mica-reinforced injected molded polypropylene woofer cone, elastic polymer rolled surround, and poly cotton aramid damper. Its midrange uses a cellulose-fiber diaphragm, while the high-frequency drivers use PET hard domes. Ferrite magnets are used for the woofer and midrange sections, and the voice coil uses glass imide material with copper wire.\u003c\/p\u003e\u003cp\u003eThese speakers require a compatible 6 x 9-inch location with sufficient clearance for the 2-7\/8-inch mounting depth and approximately 8-3\/4 x 6-inch cutout. Use the included Multi-Fit adapters only where they suit the vehicle's mounting arrangement, and connect speaker wiring to the lug-type terminals with correct polarity. Check fitment in the specific vehicle before purchase, including door-panel, window-track, grille, and mounting-depth clearance.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809477288127,"sku":"TS-A6961F","price":51.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71FZjl29MhL.jpg?v=1783109863"},{"product_id":"pioneer-ts-a6991f","title":"Pioneer TS-A6991F 6x9\" 5-Way Coaxial Speakers","description":"\u003cp\u003eThe Pioneer TS-A6991F is a pair of 6 x 9-inch A-Series Plus coaxial car speakers designed to replace compatible factory speakers with a fuller, more detailed sound. Its 5-way layout combines a large woofer, dedicated midrange, tweeter, and two super tweeters in each speaker. This makes it a practical option for drivers seeking an all-in-one full-range speaker upgrade without adding separate external crossover networks.\u003c\/p\u003e\u003cp\u003eEach TS-A6991F speaker handles up to 120 watts RMS and 700 watts maximum power for use with compatible factory or aftermarket audio systems. With a 4-ohm nominal impedance and 92 dB sensitivity rating, the pair is designed for broad compatibility with common car-audio amplification. The 29 Hz to 33 kHz frequency response covers low bass through extended high-frequency detail.\u003c\/p\u003e\u003cp\u003eThe 6 x 9-inch woofer uses Pioneer’s carbon- and mica-reinforced IMPP cone construction, supported by an elastic polymer surround. This combination is intended to provide a rigid yet responsive woofer foundation for midbass and lower-frequency reproduction. A ferrite magnet motor structure and pressed iron basket support the woofer assembly.\u003c\/p\u003e\u003cp\u003eA 57 mm PEI film-cone midrange complements the woofer, while the upper-frequency section uses 18 mm, 11 mm, and 9 mm PET hard-dome drivers. Pioneer’s Open \u0026amp; Smooth sound concept is intended to support a smooth transition among the speaker drivers and consistent off-axis response in vehicle interiors. That makes the design well suited to common door, rear-deck, and parcel-shelf locations where speakers may not point directly at listeners.\u003c\/p\u003e\u003cp\u003eThe TS-A6991F can serve as a direct full-range upgrade in a compatible 6 x 9-inch mounting location or as part of a larger system with an aftermarket receiver, amplifier, and subwoofer. Its included grilles and mounting hardware support custom-install applications, while the 153 x 222 mm cutout requirement and 86 mm mounting depth should be checked before purchase. Confirm vehicle-specific fitment, mounting clearance, and factory wiring requirements before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer, midrange, tweeter, and two super tweeters in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120W RMS Power Handling:\u003c\/strong\u003e Supports substantial continuous power in a compatible car-audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e700W Maximum Power:\u003c\/strong\u003e Provides additional peak-power capability for dynamic music passages.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon\/Mica IMPP Woofer Cone:\u003c\/strong\u003e Creates a rigid woofer platform for full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple PET Dome High-Frequency Array:\u003c\/strong\u003e Uses 18 mm, 11 mm, and 9 mm dome drivers for upper-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92 dB Sensitivity:\u003c\/strong\u003e Helps the speakers produce strong output from compatible power sources.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-A6991F uses a carbon- and mica-reinforced injection-molded polypropylene woofer cone, elastic polymer surround, ferrite magnet, and pressed iron basket. Its 5-way coaxial architecture places the 57 mm PEI midrange and PET dome high-frequency drivers over the 6 x 9-inch woofer. Protective speaker grilles are included for installations where the speaker face is exposed.\u003c\/p\u003e\u003cp\u003eVerify the vehicle opening against the 153 x 222 mm cutout requirement and allow for the 86 mm mounting depth before ordering. The package includes two speakers, two mounting brackets, two grilles, speaker-wire leads, and mounting screws. Use compatible wiring and a 4-ohm-capable receiver or amplifier, and compare the source’s continuous output with the speakers’ 120-watt RMS rating.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809477320895,"sku":"TS-A6991F","price":80.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61gGG4rk2sL.jpg?v=1783109866"},{"product_id":"pioneer-ts-a6991fh","title":"Pioneer TS-A6991FH 6x9\" 5-Way Coaxial Speakers","description":"\u003cp\u003eThe Pioneer TS-A6991FH is a pair of 6 x 9-inch, 5-way coaxial car speakers designed for vehicles that use this common oval speaker size. It provides an upgrade path for worn, damaged, or basic factory speakers while keeping the installation focused on a full-range coaxial design. Each speaker combines a woofer, midrange, tweeter, and two super tweeters in one assembly.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for listeners who want broader frequency coverage from a factory-location replacement without adding separate component speakers. Their 4-ohm nominal impedance is suited to compatible automotive audio systems. Before purchase, verify both the vehicle's mounting opening and available depth.\u003c\/p\u003e\u003cp\u003eThe TS-A6991FH is rated for 150 watts RMS continuous power handling and 750 watts maximum music power. Its 93 dB sensitivity rating helps it produce useful output from a compatible car stereo or amplifier. For amplified systems, use an amplifier setup appropriate for the speaker's 4-ohm load and continuous-power rating.\u003c\/p\u003e\u003cp\u003ePioneer uses a carbon- and mica-reinforced IMPP cone for the 6 x 9-inch woofer, a material combination intended to support responsive bass reproduction. A 57 mm PEI cone midrange handles part of the vocal and mid-frequency range. The high-frequency section uses one 18 mm PET hard-dome tweeter plus 11 mm and 9 mm PET hard-dome super tweeters.\u003c\/p\u003e\u003cp\u003eThe coaxial 5-way layout keeps all drivers in a single speaker frame, making it practical for many rear-deck, door, or cargo-area speaker locations that accept 6 x 9-inch speakers. Pioneer lists a 29 Hz to 31 kHz frequency response and an 85.7 mm mounting depth. The pair can be used as a direct speaker replacement or as part of a larger system with a compatible receiver and amplifier.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-Way Coaxial System:\u003c\/strong\u003e Integrates five driver sections in each speaker for full-range playback from one mounting location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W RMS Handling:\u003c\/strong\u003e Supports up to 150 watts of continuous power handling for each listed speaker system specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon\/Mica IMPP Woofer:\u003c\/strong\u003e Uses a reinforced 6 x 9-inch cone designed for responsive low-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Midrange Cone:\u003c\/strong\u003e The 57 mm midrange supports clear reproduction through the vocal range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple PET Dome Tweeters:\u003c\/strong\u003e An 18 mm tweeter and 11 mm and 9 mm super tweeters cover high-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Design:\u003c\/strong\u003e Matches the nominal impedance commonly used by compatible automotive speaker outputs and amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-A6991FH uses a 6 x 9-inch carbon- and mica-reinforced IMPP woofer cone, a PEI midrange cone, and PET hard-dome high-frequency drivers. Its integrated coaxial construction places the midrange and high-frequency drivers over the woofer assembly. Pioneer also specifies an optimized symmetrical motor design with a large magnet.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 6 x 9-inch speaker, with a 6 x 8-3\/4-inch cutout and at least 3-3\/8 inches of mounting depth. Connect the speaker leads securely and ensure the terminals and leads cannot contact metal vehicle surfaces. The supplied documentation lists mounting hardware and speaker-wire leads; use vehicle-specific adapters or harnesses when required for a clean installation.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809477353663,"sku":"TS-A6991FH","price":91.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71y5K8_a4lL.jpg?v=1783109869"},{"product_id":"pioneer-ts-a709","title":"Pioneer TS-A709 2.75\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Pioneer TS-A709 is a pair of compact 2.75-inch, 2-way coaxial car speakers designed for select factory speaker locations and small custom installations. They provide a practical replacement path when an original small-format speaker has become weak, damaged, or lacks detail. Each speaker combines a woofer and centrally mounted dome tweeter in one compact assembly.\u003c\/p\u003e\u003cp\u003eThese speakers are suited to drivers upgrading compatible dash, corner, or other small OEM locations while retaining a conventional 4-ohm car-audio load. Pioneer rates the TS-A709 at 100 watts nominal power and 450 watts maximum power when used with its packaged in-line crossover network. Fitment should always be confirmed by measuring the opening, available depth, and mounting-tab clearance in the vehicle.\u003c\/p\u003e\u003cp\u003eThe sound design emphasizes broad high-frequency extension and clear upper-range reproduction from a small speaker footprint. Its specified response is 101 Hz to 34 kHz without the filter, or 850 Hz to 34 kHz with the packaged in-line crossover network. Because of its compact diameter and filtered operating range, it is most appropriately used where the vehicle or system provides lower-frequency support from larger speakers or a subwoofer.\u003c\/p\u003e\u003cp\u003eA carbon- and mica-reinforced injected-molded polypropylene cone forms the woofer section, while a 16 mm polyetherimide hard-dome tweeter handles higher frequencies. The speaker also uses a rubber rolled surround, aramid-fiber damper, ferrite magnet, and copper-wound single voice coil. These material choices support use in the temperature and vibration conditions found in vehicle interiors.\u003c\/p\u003e\u003cp\u003eThe TS-A709 belongs to Pioneer's A-Series and uses the brand's OPEN \u0026amp; SMOOTH sound-design approach. Its compact round format, 2.5-inch cutout requirement, and 1.25-inch mounting depth can make it useful for compatible OEM replacement locations. For a balanced system, pair it with properly matched full-range door or rear speakers and retain the supplied in-line crossover arrangement.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Layout:\u003c\/strong\u003e Combines woofer and dome tweeter in one compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon\/Mica IMPP Cone:\u003c\/strong\u003e Reinforced polypropylene cone supports responsive operation in automotive environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 mm PEI Dome Tweeter:\u003c\/strong\u003e Handles high frequencies with a hard-dome polyetherimide diaphragm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn-Line High-Pass Crossover:\u003c\/strong\u003e Packaged network supports the specified filtered operating range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Nominal Impedance:\u003c\/strong\u003e Matches the common impedance used by many car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact OEM-Style Fitment:\u003c\/strong\u003e 2.5-inch cutout and 1.25-inch mounting depth suit compatible locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-A709 uses a round metal basket with a custom-fit basket design, carbon- and mica-reinforced IMPP cone, rolled rubber surround, aramid-fiber damper, ferrite magnet, and glass-imide voice-coil former. Its tweeter is a 16 mm PEI dome design. The speakers use lug-style terminals and a single copper-wound voice coil.\u003c\/p\u003e\u003cp\u003eVerify a 2.5-inch cutout, 1.25-inch mounting depth, mounting-tab space, and 4-ohm system compatibility before installation. Use the packaged in-line crossover network as specified, observe speaker polarity, and ensure the speaker terminals cannot contact vehicle metal. These speakers are best used as replacements in compatible small speaker locations or as part of a system supported by larger speakers for lower frequencies.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809477386431,"sku":"TS-A709","price":45.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61CIdTYSITL.jpg?v=1783109872"},{"product_id":"pioneer-ts-b351pro","title":"Pioneer TS-B351PRO 3.5\" Bullet Tweeters","description":"\u003cp\u003eThe Pioneer TS-B351PRO is a pair of 3.5-inch bullet tweeters designed to add focused high-frequency output to a car-audio system. It is built for listeners assembling high-sensitivity systems where clear upper-frequency reproduction is needed alongside mid-bass drivers and subwoofers. With a 3,000 Hz to 22,000 Hz frequency response, it is intended to handle the upper range rather than full-range or bass duties.\u003c\/p\u003e\u003cp\u003ePart of Pioneer’s P.R.O. Series, the TS-B351PRO is suited to open-show and high-SPL-oriented installations. Its 100 dB sensitivity rating helps it produce substantial output from available amplifier power. The 4-ohm nominal impedance makes it suitable for use with compatible car-audio amplification and crossover arrangements.\u003c\/p\u003e\u003cp\u003eThe tweeter uses a titanium diaphragm in a horn-style bullet design. This combination is designed for direct, efficient high-frequency projection in systems that need to remain audible at elevated listening levels. Pioneer rates the pair at 150 watts nominal power handling and 300 watts maximum power handling.\u003c\/p\u003e\u003cp\u003eAn aluminum die-cast chassis supports the tweeter assembly, while a ferrite magnet provides the motor structure. The field-serviceable tweeter unit can be repaired using Pioneer’s compatible replacement diaphragm repair kit. This makes the TS-B351PRO a practical choice for systems where serviceability is important.\u003c\/p\u003e\u003cp\u003eThese tweeters work best as part of a properly filtered multi-speaker setup, not as standalone speakers. Pioneer specifies a 3,000 Hz crossover frequency and instructs installers to use the specified network. Pair them with appropriately crossed-over mid-bass speakers, a compatible amplifier, and secure mounting hardware for a balanced system upgrade.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5-Inch Bullet Tweeters:\u003c\/strong\u003e Focused high-frequency drivers for multi-speaker car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium Diaphragms:\u003c\/strong\u003e Provide a durable diaphragm material for upper-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W Nominal Handling:\u003c\/strong\u003e Supports amplified systems with appropriate crossover protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 dB Sensitivity:\u003c\/strong\u003e Helps deliver strong output with available amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches many compatible car-audio amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField-Serviceable Design:\u003c\/strong\u003e Allows replacement of the tweeter diaphragm assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-B351PRO combines a titanium tweeter diaphragm with an aluminum die-cast chassis and ferrite magnet. Its bullet-style, horn-oriented layout is made for efficient high-frequency output, and the chassis is designed to provide a rigid mounting structure. No speaker grilles are included.\u003c\/p\u003e\u003cp\u003eConfirm fitment before installation: each tweeter requires a 3-inch cutout and 1-3\/4-inch mounting depth, with a 4-inch outer diameter. Mounting screws are included, but the system must use the specified crossover network; Pioneer cautions against operating the speaker independently. Secure the capacitor body and lead wire after wiring, and keep capacitor leads away from metal parts.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809477419199,"sku":"TS-B351PRO","price":45.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71YaxsnbEYL.jpg?v=1783109875"},{"product_id":"pioneer-ts-g1320s","title":"Pioneer TS-G1320S 5.25\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Pioneer TS-G1320S is a pair of 5.25-inch coaxial car speakers designed to replace worn or limited factory speakers in compatible vehicle locations. Its 2-way layout combines a woofer and tweeter in each speaker, helping cover bass, vocal, and treble duties from one compact mounting position. It is a practical option for drivers seeking a straightforward OEM-style speaker replacement with clear everyday sound.\u003c\/p\u003e\u003cp\u003eWith 35 watts nominal power handling and a 4-ohm impedance, the TS-G1320S is suited to many conventional car-audio speaker circuits. Its 88 dB sensitivity helps it produce useful output from modest power, including compatible factory or aftermarket head-unit amplification. A 250-watt maximum music-power rating provides additional short-term power-handling headroom.\u003c\/p\u003e\u003cp\u003eThe 5.25-inch woofer uses Pioneer’s mica-reinforced Injected Molded Polypropylene (IMPP) cone. This lightweight, rigid cone construction is intended to support responsive midrange and bass reproduction while helping control distortion. A Conex damper and Pioneer P.F.S.S. spider support cone movement during playback.\u003c\/p\u003e\u003cp\u003eFor upper frequencies, each speaker uses a 30 mm PET hard-dome balanced tweeter. The coaxial arrangement places the tweeter in the center of the woofer, allowing both drivers to install through one speaker opening. The specified 33 Hz to 24 kHz frequency response provides broad coverage for full-range music playback.\u003c\/p\u003e\u003cp\u003eThe TS-G1320S is designed with a shallow 1.75-inch mounting depth for use in a wide range of vehicle speaker locations. It requires a 4.75-inch cutout, so vehicle-specific fitment and clearance behind the mounting surface should be checked before purchase. It can serve as a direct factory-speaker replacement or as part of a basic system upgrade paired with a compatible 4-ohm source or amplifier.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoaxial 2-Way Design:\u003c\/strong\u003e Integrates woofer and tweeter in each speaker for full-range sound from one mounting location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e35W Nominal Power:\u003c\/strong\u003e Matches modest-power factory and aftermarket audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250W Maximum Music Power:\u003c\/strong\u003e Provides short-term power-handling capacity for dynamic listening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMica-Reinforced IMPP Cone:\u003c\/strong\u003e Uses a lightweight, rigid woofer cone designed to help reduce distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30 mm PET Dome Tweeter:\u003c\/strong\u003e Reproduces high-frequency detail from a centered coaxial tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eP.F.S.S. Spider:\u003c\/strong\u003e Supports controlled cone movement for more linear sound reproduction.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-G1320S uses a mica-reinforced IMPP woofer cone, PET hard-dome tweeter, Conex damper, and Pioneer Progressive Flex Suspension System spider. Its 129 mm woofer frame and 110 g magnet are built into a compact coaxial assembly. The speaker’s balanced-dome tweeter is centrally mounted to keep the design compact.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle has a compatible 5.25-inch speaker position, a 4.75-inch cutout, and at least 1.75 inches of mounting depth. Use the supplied mounting hardware as applicable, maintain correct speaker polarity, and prevent the speaker leads or terminals from touching vehicle metal. For amplified systems, use a compatible 4-ohm channel and avoid distortion or sustained operation beyond the speaker’s nominal power rating.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809477583039,"sku":"TS-G1320S","price":34.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71d62s8R4dL.jpg?v=1783109888"},{"product_id":"pioneer-ts-g1620f","title":"Pioneer TS-G1620F 6.5\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Pioneer TS-G1620F is a pair of 6.5-inch, 2-way coaxial car speakers designed to replace worn or underperforming factory door or rear-deck speakers. Its 4-ohm design and 40-watt nominal power rating make it suitable for many factory and aftermarket car stereos. The shallow mounting profile helps address installations where door-panel clearance is limited.\u003c\/p\u003e\u003cp\u003eA coaxial layout places the balanced-dome tweeter over the woofer, allowing a single speaker location to reproduce both midrange\/bass and high-frequency information. This provides a practical full-range upgrade without adding separate tweeter mounting locations. It is a straightforward option for restoring clear music playback in common 6.5-inch speaker positions.\u003c\/p\u003e\u003cp\u003eThe woofer uses Pioneer’s mica-reinforced injection-molded polypropylene cone. This lightweight cone construction is paired with a rubber-coated cloth surround and a Conex damper to support controlled cone movement. Pioneer also uses its Progressive Flex Suspension System spider to help manage vibration during playback.\u003c\/p\u003e\u003cp\u003eFor high frequencies, the TS-G1620F uses a 30 mm PET balanced-dome tweeter. The speaker is rated at 89 dB sensitivity and covers a specified 31 Hz to 18 kHz frequency response range. Its 300-watt maximum music-power rating and 40-watt nominal rating are specified per speaker.\u003c\/p\u003e\u003cp\u003eThe TS-G1620F works well as a basic replacement or as part of a modest car-audio refresh built around a compatible 4-ohm head unit or amplifier. It is supplied as a pair and includes grilles for installations where the speakers are exposed. Confirm the vehicle’s cutout, mounting depth, mounting-hole pattern, and connector needs before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter output in one speaker location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40W Nominal Power:\u003c\/strong\u003e Matches well with modest factory or aftermarket power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W Maximum Music Power:\u003c\/strong\u003e Provides short-term power-handling capacity per speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMica-Reinforced IMPP Cone:\u003c\/strong\u003e Supports low weight and controlled woofer response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30 mm PET Tweeter:\u003c\/strong\u003e Adds dedicated high-frequency reproduction from a balanced dome.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eP.F.S.S. Spider:\u003c\/strong\u003e Helps control cone movement and vibration during playback.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-G1620F uses a mica-reinforced IMPP woofer cone, rubber-coated cloth surround, ferrite magnet, and PET balanced-dome tweeter. Its grille combines steel netting with heat-resistant resin, and the speaker uses a shallow-depth configuration intended for vehicle locations with limited rear clearance. The coaxial construction keeps the woofer and tweeter integrated in one assembly.\u003c\/p\u003e\u003cp\u003eCheck for a 5-inch cutout and approximately 1-5\/8 inches of mounting depth before purchase, while also verifying clearance for cone movement, window mechanisms, and door-panel components. Use the supplied hardware as appropriate, keep terminals and leads from contacting metal, and follow the vehicle and stereo manuals for connection guidance. Adapter brackets or vehicle-specific harnesses may be needed depending on the factory mounting location and connector.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809477615807,"sku":"TS-G1620F","price":39.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81t9FVtEIvL.jpg?v=1783109891"},{"product_id":"pioneer-ts-g4620s","title":"Pioneer TS-G4620S 4\" x 6\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Pioneer TS-G4620S is a pair of 4\" x 6\" two-way coaxial car speakers designed to replace worn or limited factory speakers. Its compact oval format fits many common vehicle speaker locations while providing a straightforward path to refreshed sound. With a 4-ohm nominal impedance and 30-watt nominal power handling, it is suited to systems using factory or modest aftermarket amplification.\u003c\/p\u003e\u003cp\u003eEach speaker combines a 4\" x 6\" woofer and centrally mounted balanced-dome tweeter in one coaxial assembly. This two-way layout covers low, midrange, and high-frequency content through a single mounting location. The result is a practical upgrade for listeners seeking clearer everyday music playback without converting the vehicle to a separate-component system.\u003c\/p\u003e\u003cp\u003eA mica-reinforced Injected Molded Polypropylene (IMPP) woofer cone forms the foundation of the TS-G4620S design. The lightweight cone construction is paired with Pioneer's Progressive Flex Suspension System spider and a Conex damper. Together, these components support controlled cone movement and dependable operation within the speaker's rated power range.\u003c\/p\u003e\u003cp\u003eThe 30 mm PET hard-dome balanced-dome tweeter is intended to handle upper-frequency detail, while the speaker's specified response extends from 35 Hz to 22 kHz. Its 89 dB sensitivity rating helps it produce useful output from lower-powered car-stereo channels. This makes the pair a sensible option for restoring front or rear factory locations where space and available power are limited.\u003c\/p\u003e\u003cp\u003eInstallation-oriented details include a shallow 1-5\/8\" mounting depth and a 153 mm x 95 mm cutout reference. The package includes mounting hardware and short wire extensions to support typical replacement work. Vehicle fit should still be confirmed by checking the factory opening, available depth, mounting-hole layout, and connector requirements before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4\" x 6\" Coaxial Format:\u003c\/strong\u003e Combines woofer and tweeter in one compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Design:\u003c\/strong\u003e Separates broad frequency duties between woofer and tweeter drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-Watt Nominal Rating:\u003c\/strong\u003e Matches moderate-power factory and aftermarket audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMica-Reinforced IMPP Cone:\u003c\/strong\u003e Provides a lightweight woofer cone construction for everyday playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30 mm PET Dome Tweeter:\u003c\/strong\u003e Reproduces high-frequency information through a balanced-dome design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow Mounting Depth:\u003c\/strong\u003e Helps accommodate vehicle locations with limited clearance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-G4620S uses a 95 mm x 153 mm woofer, mica-reinforced IMPP cone, 110 g woofer magnet, and 30 mm balanced-dome tweeter. Pioneer also specifies a Conex damper and its P.F.S.S. spider as parts of the speaker construction. Each speaker weighs 0.37 kg including accessory parts.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 4\" x 6\" speaker and allows approximately 1-5\/8\" of mounting depth before ordering. The included mounting adapters, screws, nuts, washers, and 30 cm wire extensions can assist with installation, but vehicle-specific brackets or wiring adapters may still be needed. Connect the speakers to channels compatible with a 4-ohm load, observe polarity, and keep terminals and leads from contacting metal vehicle parts.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809477648575,"sku":"TS-G4620S","price":35.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61w7bMsXVUL.jpg?v=1783109894"},{"product_id":"pioneer-ts-g6820s","title":"Pioneer TS-G6820S 6x8\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Pioneer TS-G6820S is a pair of 6 x 8-inch, 2-way coaxial car speakers made for replacing worn factory speakers or upgrading a compatible OEM audio system. Its 4-ohm design, 40-watt nominal power handling, and 92 dB sensitivity make it suited to many standard car stereo applications. The shallow 2-1\/2-inch mounting depth supports installation where available door or rear-deck space is limited.\u003c\/p\u003e\u003cp\u003eThese speakers use a coaxial layout that places the tweeter within the woofer assembly, helping provide full-range playback from a single factory-style speaker location. A mica-reinforced Injected Molded Polypropylene (IMPP) cone handles the main midrange and bass frequencies. The result is a practical replacement format for listeners who want clearer everyday music reproduction without changing the vehicle's speaker locations.\u003c\/p\u003e\u003cp\u003eThe TS-G6820S has a frequency response of 72 Hz to 14 kHz, covering much of the range used for vocals, instruments, and upper-frequency detail. Its 30 mm PET hard-dome tweeter is designed to reproduce the higher frequencies, while the 6 x 8-inch woofer supplies the lower and middle range. This configuration is intended for balanced sound from a compact, direct-replacement speaker system.\u003c\/p\u003e\u003cp\u003ePioneer uses a mica-reinforced IMPP cone to combine low mass with rigidity, supporting sensitivity and helping control cone distortion. The speaker also incorporates a Conex damper and Pioneer Progressive Flex Suspension System (P.F.S.S.) spider. These suspension and damping elements support controlled cone movement during playback.\u003c\/p\u003e\u003cp\u003eWith 250 watts maximum power handling and 40 watts nominal power handling, the TS-G6820S can be used with a compatible factory radio or a properly matched aftermarket amplifier. It is a pair of coaxial speakers rather than a separate-component system, so no external crossover is specified. Confirm the vehicle's speaker opening, mounting depth, mounting pattern, and wiring connection before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 x 8-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter functions in each speaker for factory-location upgrades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40W Nominal Power:\u003c\/strong\u003e Provides a practical power rating for compatible OEM and aftermarket systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250W Maximum Power:\u003c\/strong\u003e Supports short-term dynamic musical peaks within the speaker's rated limits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMica-Reinforced IMPP Cone:\u003c\/strong\u003e Uses a lightweight, rigid woofer cone material for controlled playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30 mm PET Tweeter:\u003c\/strong\u003e Handles upper-frequency detail with a hard-dome tweeter design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eP.F.S.S. Spider:\u003c\/strong\u003e Supports the voice-coil assembly and helps manage cone movement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-G6820S uses a 6 x 8-inch mica-reinforced IMPP woofer cone, a PET hard-dome tweeter, and a ferrite magnet structure. Its coaxial architecture keeps the system compact by integrating the tweeter with the woofer assembly. The speakers have a black finish and a 2-1\/2-inch mounting depth.\u003c\/p\u003e\u003cp\u003eCheck that the vehicle accepts a 6 x 8-inch speaker and verify the 7-1\/2 x 5-1\/4-inch cutout requirement along with available mounting depth before ordering. The package includes two speakers, wire extensions, mounting hardware, screws, foam packing, and warranty paperwork. Use the supplied hardware as appropriate, and follow vehicle-specific wiring polarity and mounting guidance for installation.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809477714111,"sku":"TS-G6820S","price":34.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71GBVBjwCGL.jpg?v=1783109897"},{"product_id":"pioneer-ts-g6930f","title":"Pioneer TS-G6930F 6 x 9\" 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Pioneer TS-G6930F is a pair of 6 x 9-inch, 3-way coaxial car speakers designed to replace or upgrade factory-installed full-range speakers. It combines a woofer, midrange driver, and dome tweeter in each speaker assembly to cover a broad range of musical detail. With a 4-ohm impedance and 90 dB sensitivity rating, it is suited to many conventional car audio speaker applications.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for drivers looking to refresh worn factory speakers while retaining a straightforward coaxial layout. The 45-watt nominal power rating provides a practical match point when selecting a compatible head unit or amplifier. Their 400-watt maximum power specification describes short-term power capability rather than continuous operating power.\u003c\/p\u003e\u003cp\u003eThe TS-G6930F uses a mica-reinforced IMPP™ polypropylene woofer cone, a material chosen for a rigid, lightweight diaphragm. Pioneer pairs it with a Conex damper and its P.F.S.S. spider design. Together, these construction elements support controlled cone movement and durable everyday use.\u003c\/p\u003e\u003cp\u003eA 48 mm cellulose-fiber cone midrange and 11 mm PET hard-dome tweeter are integrated into the coaxial design. This three-way arrangement separates bass, midrange, and treble reproduction among dedicated drivers. The specified frequency response is 32 Hz to 32 kHz.\u003c\/p\u003e\u003cp\u003eThe TS-G6930F is a practical option for compatible front-door, rear-deck, or rear-door 6 x 9-inch locations. Its 2-3\/4-inch mounting depth can help where installation space is limited, but vehicle fitment should always be measured before purchase. Speaker grilles are included for installations that require them.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer, midrange, and tweeter drivers in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e45W Nominal Power:\u003c\/strong\u003e Provides a realistic continuous-power reference for system matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400W Maximum Power:\u003c\/strong\u003e Supports short-term dynamic musical peaks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMica-Reinforced IMPP™ Cone:\u003c\/strong\u003e Uses a rigid, lightweight polypropylene composite woofer diaphragm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90 dB Sensitivity:\u003c\/strong\u003e Helps produce useful output from modest power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32 Hz–32 kHz Response:\u003c\/strong\u003e Covers low bass through extended high-frequency content.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-G6930F uses a ferrite magnet system, mica-reinforced IMPP™ woofer cone, cellulose-fiber midrange cone, and PET hard-dome tweeter. Pioneer also specifies a Conex damper and patented P.F.S.S. spider. The included grilles use steel mesh and heat-resistant resin construction.\u003c\/p\u003e\u003cp\u003eBefore installation, verify the available cutout area, mounting depth, and clearance behind the mounting surface. The specified cutout is 8-3\/4 x 6 inches, with a 2-3\/4-inch mounting depth. Use the included mounting hardware and connection wires where appropriate, and confirm that the connected radio or amplifier is compatible with 4-ohm speakers.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809477746879,"sku":"TS-G6930F","price":40.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/618nY-F6D2L.jpg?v=1783109900"},{"product_id":"pioneer-ts-t110","title":"Pioneer TS-T110 7\/8\" Hard Dome Tweeters","description":"\u003cp\u003eThe Pioneer TS-T110 is a pair of compact 7\/8-inch hard dome tweeters made to add dedicated high-frequency output to a car audio system. They are suited to replacing worn factory tweeters or supplementing a system that lacks upper-frequency detail. With a 4-ohm nominal impedance and 40-watt nominal power handling, they are designed for use with compatible car audio amplification.\u003c\/p\u003e\u003cp\u003eThese tweeters cover a 2,500 Hz to 30,000 Hz frequency range, focusing on the upper range of music where vocal detail, cymbals, strings, and ambient information are heard. Their 90 dB sensitivity rating supports clear output from modest power. The result is a focused high-frequency addition rather than a full-range speaker replacement.\u003c\/p\u003e\u003cp\u003ePioneer specifies a 22 mm PPTA hard dome tweeter design with a lightweight polyimide diaphragm and a uniquely shaped wave guide. This engineering is intended to support wide dispersion from a small mounting footprint. A heat-resistant voice coil, magnetic fluid, and strontium magnet are also listed in the original product specifications.\u003c\/p\u003e\u003cp\u003eThe TS-T110 includes high-pass filtering at 7,000 Hz with a 6 dB-per-octave slope to protect the tweeters from lower-frequency content. This makes the pair appropriate for use as dedicated high-frequency drivers in a properly configured speaker system. Match them with compatible front speakers and an audio source or amplifier that supports the system's impedance and power requirements.\u003c\/p\u003e\u003cp\u003eFlexible flush- and surface-mount options help the TS-T110 fit common door-panel, dash-corner, and trim-panel locations. Its 2-inch mounting-hole requirement and 3\/4-inch mounting depth should be checked against the selected installation point before purchase. Proper placement, secure mounting, and correct polarity are important for balanced stereo imaging and reliable operation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e22 mm Hard Dome:\u003c\/strong\u003e Compact 7\/8-inch tweeters handle dedicated high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120W Maximum Power:\u003c\/strong\u003e Rated for 120 watts maximum and 40 watts nominal power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2,500–30,000 Hz Response:\u003c\/strong\u003e Covers the upper-frequency range for added detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90 dB Sensitivity:\u003c\/strong\u003e Supports clear output with compatible low-to-moderate power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In High-Pass Filtering:\u003c\/strong\u003e 7,000 Hz, 6 dB-per-octave filtering limits low-frequency content.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Mounting Choices:\u003c\/strong\u003e Supports flush or surface mounting for installation flexibility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-T110 uses a compact 22 mm PPTA hard dome design with a heat-resistant voice coil, magnetic fluid, and a 22 g strontium magnet. Pioneer also specifies a lightweight polyimide tweeter diaphragm and uniquely shaped wave guide. The assembly has a metal-mesh and heat-resistant-resin grille construction listed in the original specifications.\u003c\/p\u003e\u003cp\u003eFor flush installation, allow for a 2-inch mounting hole, 3\/4-inch mounting depth, and approximately 3\/8-inch protrusion. Surface mounting is also supported, with the original installation guide showing door-side and dashboard-corner placement examples. Use the specified high-pass-filtered connection arrangement, observe positive and negative polarity, and verify available panel depth before cutting or drilling.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809477779647,"sku":"TS-T110","price":31.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61B6JAgIYJL.jpg?v=1783109903"},{"product_id":"pioneer-ts-a25s4","title":"Pioneer TS-A25S4 10\" Single 4-Ohm Car Subwoofer","description":"\u003cp\u003eThe Pioneer TS-A25S4 is a 10-inch passive car subwoofer designed to add low-frequency output to an amplified vehicle audio system. It is intended for listeners who want more bass impact than full-range door or rear-deck speakers can provide. Its single 4-ohm voice coil supports straightforward amplifier matching and wiring in compatible installations.\u003c\/p\u003e\u003cp\u003eWith a 350-watt RMS power rating and 1,200-watt maximum power rating, the TS-A25S4 is built for a properly matched external amplifier rather than direct connection to a head unit. The subwoofer uses an IMPP composite cone reinforced with carbon and mica to support rigidity during bass reproduction. Its published frequency range extends from 22 Hz to 1.4 kHz.\u003c\/p\u003e\u003cp\u003eThe A-Series design uses an elastic polymer surround and polycotton spider to support controlled cone movement. Pioneer also specifies a specially designed voice coil for increased power handling. These elements help the subwoofer serve as the bass foundation of an A-Series speaker upgrade.\u003c\/p\u003e\u003cp\u003eThis is a component subwoofer, so an enclosure and external amplification are required for operation. It can be installed in either a sealed or vented enclosure, letting installers choose a more compact sealed alignment or the larger recommended vented alignment. Its 4-ohm single-voice-coil configuration is suited to amplifiers rated to operate at a 4-ohm speaker load.\u003c\/p\u003e\u003cp\u003eThe TS-A25S4 is a practical choice for a custom trunk, hatch, or enclosure-based bass upgrade where mounting depth and box volume can be planned in advance. Pioneer specifies a 0.8-cubic-foot sealed enclosure or a 1.1-cubic-foot vented enclosure. Verify cutout, mounting depth, enclosure displacement, and amplifier compatibility before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Subwoofer:\u003c\/strong\u003e Adds dedicated low-frequency output to a car audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e350W RMS Handling:\u003c\/strong\u003e Supports matching with an appropriately rated external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Single Voice Coil:\u003c\/strong\u003e Provides a simple fixed-impedance wiring configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIMPP Composite Cone:\u003c\/strong\u003e Uses carbon- and mica-reinforced polypropylene for cone rigidity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Or Vented Compatible:\u003c\/strong\u003e Supports Pioneer-recommended enclosure alignment options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e85 dB Sensitivity:\u003c\/strong\u003e Published efficiency rating at 1 watt and 1 meter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-A25S4 combines a carbon- and mica-reinforced injected molded polypropylene cone with an elastic polymer surround and polycotton spider. Its single voice coil design uses a 4-ohm nominal impedance, while the subwoofer motor uses a magnet specified at 1,300 g. The driver is part of Pioneer’s A-Series component subwoofer range and is compatible with Pioneer CarSoundFit resources.\u003c\/p\u003e\u003cp\u003eInstall the subwoofer in a properly built enclosure with the recommended internal volume: 0.8 cubic feet sealed or 1.1 cubic feet vented. Pioneer lists a 9-inch cutout and publishes mounting-depth information; confirm physical clearance at the intended mounting location before cutting. Connect it to a compatible external amplifier, observe polarity, and configure amplifier gain and low-pass filtering appropriately for the rest of the audio system.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809477845183,"sku":"TS-A25S4","price":44.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71LELzjj9ZL.jpg?v=1783109909"},{"product_id":"pioneer-dmh-wt5000nex","title":"Pioneer DMH-WT5000NEX 9\" Single DIN Digital Media Receiver","description":"\u003cp\u003eThe Pioneer DMH-WT5000NEX is a 1-DIN digital media receiver built for drivers who want a large touchscreen without needing a conventional double-DIN opening. Its 9.0-inch floating capacitive display mounts in front of the radio location, bringing modern smartphone control and media access to a wide range of compatible vehicles. It is a practical upgrade for replacing an older factory radio or adding a larger interface to a custom installation.\u003c\/p\u003e\u003cp\u003eWireless and wired Apple CarPlay and Android Auto place compatible phone navigation, calling, messaging, music, and voice-control functions on the receiver's display. Built-in Bluetooth supports hands-free calling and wireless audio, while dual-phone connection adds convenience for shared vehicles. Wi-Fi tethering and hotspot capability support its connected feature set.\u003c\/p\u003e\u003cp\u003eThe DMH-WT5000NEX combines its touchscreen interface with built-in HD Radio, RDS, and SiriusXM readiness for drivers who use both broadcast and streaming sources. USB playback supports a broad selection of music, video, and image file types. A rear USB connection also provides direct control for compatible iPhone models.\u003c\/p\u003e\u003cp\u003eFor system tuning, Pioneer equips this receiver with a built-in dual-core 48-bit DSP\/DAC, 13-band graphic equalizer, time alignment, selectable crossover functions, and subwoofer control. Its 4-volt, 6-channel RCA preouts provide a clean connection point for external amplifiers. The built-in four-channel amplifier can power compatible speakers directly while supporting a staged upgrade path.\u003c\/p\u003e\u003cp\u003eCamera and vehicle-integration provisions help the receiver fit into a more complete in-car system. It includes a dedicated backup-camera input, an additional A\/V or second-camera input, and parking-assist lines. Compatibility with iDatalink Maestro, Metra Axxess, and optional steering-wheel-control adapters can help retain supported vehicle functions when matched with the appropriate installation hardware.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e9-Inch Floating Display:\u003c\/strong\u003e WSVGA capacitive touchscreen fits ahead of a 1-DIN chassis location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless Smartphone Integration:\u003c\/strong\u003e Supports wired or wireless Apple CarPlay and Android Auto connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In HD Radio:\u003c\/strong\u003e Provides HD Radio reception, RDS, artist experience, and multicasting support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced Audio Tuning:\u003c\/strong\u003e Dual-core DSP\/DAC, 13-band EQ, crossover controls, and time alignment tailor the system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera Expandability:\u003c\/strong\u003e Dedicated backup-camera and secondary A\/V or camera inputs support added visibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Expansion:\u003c\/strong\u003e Six-channel 4-volt RCA preouts support connections to external amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DMH-WT5000NEX uses a fixed-face, floating-screen design with a 9.0-inch 1024 x 600 capacitive display and a compact 1-DIN chassis. Its screen arrangement is intended to sit in front of the radio opening rather than inside a traditional double-DIN cavity. The interface supports multiple display languages, and the included microphone supports Bluetooth hands-free calling.\u003c\/p\u003e\u003cp\u003eConfirm dash clearance, screen position, chassis depth, and possible interference with climate controls or vents before purchase. Installation requires vehicle-specific wiring and mounting hardware as applicable; steering-wheel-control retention requires a separately sold adapter. For expanded functionality, connect compatible cameras, a SiriusXM tuner sold separately, external amplifiers through the RCA preouts, and supported iDatalink Maestro or Metra Axxess interfaces.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809477877951,"sku":"DMH-WT5000NEX","price":648.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61WKAIyEcRL.jpg?v=1783109912"},{"product_id":"pioneer-ts-a301s4","title":"Pioneer TS-A301S4 12\" Champion Series Subwoofer","description":"\u003cp\u003eThe Pioneer TS-A301S4 is a 12-inch component car subwoofer designed to add low-frequency bass to an amplified vehicle audio system. Its single 4-ohm voice coil configuration makes it suited to systems built around a compatible mono or bridged amplifier channel. It is intended for listeners who want stronger bass extension than full-range door or rear-deck speakers can provide.\u003c\/p\u003e\u003cp\u003eThis Champion Series model is rated for 500 watts RMS continuous power handling and 1,600 watts maximum music power. Its 20 Hz to 1.6 kHz frequency response supports dedicated low-frequency reproduction when paired with an appropriate crossover and amplifier setup. With 92 dB sensitivity measured in-car at 1 watt input, it is built to produce useful output from a properly matched system.\u003c\/p\u003e\u003cp\u003eThe TS-A301S4 uses a two-piece Honeycomb IMPP composite cone structure with a rigid drive cone. Pioneer specifies carbon- and mica-reinforced injection-molded polypropylene for the cone material, combining rigidity with controlled operation. A dual-layer fiber-reinforced elastic polymer surround and red spider help support stable, linear cone travel.\u003c\/p\u003e\u003cp\u003eA double-stacked 90-ounce magnet assembly and long voice coil on an aluminum bobbin are designed to manage power and heat during operation. The steel basket is optimized to support the motor assembly while helping maintain accurate cone motion. Its enclosed basket bottom is designed to reduce unwanted vibration that can affect bass output.\u003c\/p\u003e\u003cp\u003eThis subwoofer can be used in either a sealed or vented enclosure, allowing the installation to be tailored to available cargo space and bass preferences. Pioneer lists a 1.25-cubic-foot sealed enclosure recommendation and a 1.5-cubic-foot vented enclosure recommendation. It is a practical upgrade for a complete system with an external amplifier, enclosure, power wiring, signal connection, and low-pass filtering.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching based on continuous power rather than peak ratings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 4-Ohm Voice Coil:\u003c\/strong\u003e Provides a straightforward impedance load for compatible amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Inch Honeycomb IMPP Cone:\u003c\/strong\u003e Uses a rigid composite cone structure for low-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Layer Polymer Surround:\u003c\/strong\u003e Helps control cone movement during bass-heavy playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Stacked 90-Ounce Magnet:\u003c\/strong\u003e Supports the motor assembly for sustained subwoofer operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed or Vented Enclosure Support:\u003c\/strong\u003e Offers enclosure options for different installation goals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-A301S4 combines a carbon- and mica-reinforced IMPP cone, dual-layer fiber-reinforced elastic polymer surround, aluminum voice-coil bobbin, and reinforced steel basket. Its 90-ounce double-stacked magnet assembly is paired with a long voice coil and a closed lower basket structure. These elements are engineered to support controlled cone movement and reduce unnecessary vibration.\u003c\/p\u003e\u003cp\u003eConfirm space for the 11.125-inch cutout and 6.125-inch mounting depth before selecting an enclosure or mounting location. Pioneer recommends a 1.25-cubic-foot sealed enclosure or a 1.5-cubic-foot vented enclosure; the listed vented design uses a 3-inch-diameter, 6.5-inch-long port. Use a compatible amplifier and set crossover, gain, wiring, and enclosure construction appropriately; Pioneer recommends amplifier RMS output below the subwoofer's nominal power rating.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809477943487,"sku":"TS-A301S4","price":75.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61nqJQgqPIL_b5790a28-a810-44aa-8215-dc622dd06b1a.jpg?v=1783109915"},{"product_id":"pioneer-sxv300v1","title":"Pioneer SXV300V1 SiriusXM Satellite Radio Vehicle Tuner","description":"\u003cp\u003eThe Pioneer SXV300V1 SiriusXM Satellite Radio Vehicle Tuner adds SiriusXM satellite-radio capability to a compatible SiriusXM-Ready car stereo. It is designed for vehicles whose existing or aftermarket receiver has the SiriusXM-Ready logo and dedicated tuner connection. The compact tuner integrates behind the dash, allowing the head unit to control channel selection, information display, and supported SiriusXM features.\u003c\/p\u003e\u003cp\u003eThis tuner is intended for drivers who want satellite-delivered music, sports, news, talk, and comedy without adding a separate dashboard radio. It connects directly to a compatible receiver through its attached SiriusXM-Connect cable, while the included magnetic-mount antenna receives the satellite signal outside the vehicle. SiriusXM service activation and a subscription are required for programming access.\u003c\/p\u003e\u003cp\u003eAudio playback and user-interface behavior are handled through the connected SiriusXM-Ready head unit, making the SXV300V1 a clean integration component rather than a standalone receiver. Supported head units can provide live-program pause, rewind, and replay functions for up to 60 minutes. TuneStart support can also allow eligible songs on favorite channels to begin from the start.\u003c\/p\u003e\u003cp\u003eThe tuner supports SiriusXM display features available through compatible receivers, including album artwork, channel logos, and screen backgrounds on compatible color displays. It can also work with supported alert functions for favorite songs, artists, and sports teams. Feature availability depends on the connected head unit and SiriusXM subscription.\u003c\/p\u003e\u003cp\u003eAs an upgrade path, the SXV300V1 is a practical fit when installing a SiriusXM-Ready Pioneer or other compatible aftermarket stereo in a vehicle that does not already have a dedicated tuner. Its 25.6-inch integrated interface lead and 23-foot antenna cable support concealed routing behind the dash and across the vehicle exterior. The included antenna and tuner provide the core hardware needed to add SiriusXM reception to a compatible system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSiriusXM-Ready Integration:\u003c\/strong\u003e Connects directly to compatible car stereos with a dedicated SiriusXM-Ready input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLive Content Control:\u003c\/strong\u003e Supports pause, rewind, and replay of up to 60 minutes of live programming on compatible receivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuneStart Support:\u003c\/strong\u003e Lets compatible head units restart eligible songs from the beginning on favorite channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor Display Compatibility:\u003c\/strong\u003e Enables album artwork, channel logos, and backgrounds on compatible color-screen head units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFavorite Alerts:\u003c\/strong\u003e Supports alerts for selected songs, artists, and sports teams through compatible receivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic-Mount Antenna:\u003c\/strong\u003e Includes an exterior antenna with a 23-foot cable for vehicle installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe SXV300V1 uses a compact black tuner module sized to hide behind the radio or beneath the dashboard. Its integrated SiriusXM-Connect pigtail reduces the number of separate connections at the head unit, while molded underside brackets allow the module to be secured with wire ties. The included magnetic-mount antenna uses a right-angle SMB connector and is intended for exterior vehicle placement.\u003c\/p\u003e\u003cp\u003eConfirm that the stereo displays the official SiriusXM-Ready logo before purchase, then connect the tuner to the receiver's dedicated SiriusXM input with the receiver powered off. Mount the antenna outside the vehicle on a horizontal surface with a clear view of the sky, route its cable away from sharp edges and moving parts, and secure the tuner behind the dash or under the dash. Professional installation is appropriate when head-unit removal, cable routing, or antenna placement is outside the installer's comfort level.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809477976255,"sku":"SXV300V1","price":44.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/51eDuIa_Z4L.jpg?v=1783109917"},{"product_id":"pioneer-dmh-2000nex","title":"Pioneer DMH-2000NEX 6.8\" Double DIN Digital Media Receiver","description":"\u003cp\u003eThe Pioneer DMH-2000NEX is a double-DIN digital media receiver designed to bring current smartphone connectivity and touchscreen control to compatible vehicles. Its 6.8-inch capacitive WVGA display provides a central interface for music, calls, navigation apps, radio, and supported media. It is a practical upgrade for drivers replacing a factory radio or older aftermarket receiver without adding a CD or DVD player.\u003c\/p\u003e\u003cp\u003eWired Apple CarPlay and wired Android Auto place supported phone apps on the in-dash display while keeping familiar voice-control options available. Built-in Bluetooth supports hands-free calling and wireless audio streaming, while the rear USB connection handles phone integration and compatible media devices. The receiver also includes HD Radio and is SiriusXM-ready when paired with a compatible tuner sold separately.\u003c\/p\u003e\u003cp\u003eFor sound tailoring, the DMH-2000NEX uses a built-in MOSFET amplifier, 13-band graphic equalizer, selectable loudness, bass boost, listening-position adjustment, and time alignment. Its audio controls support both Standard Mode and Network Mode crossover configurations. Six-channel, 4-volt RCA preouts provide a clean path for adding external amplifiers and a subwoofer system.\u003c\/p\u003e\u003cp\u003eThe receiver uses an ARM Cortex-based system-on-chip with an N13 coprocessor and 1 GB of DDR2 internal memory for its touchscreen interface and media functions. QuickSwipe access buttons and configurable shortcut keys are intended to reduce menu steps for common actions. The fixed-face design combines a capacitive touchscreen with a compact L-shaped chassis for dashboard integration.\u003c\/p\u003e\u003cp\u003eThe DMH-2000NEX can serve as the command center of a staged audio or convenience upgrade. A dedicated rear-camera input supports the addition of a compatible backup camera and parking assist lines, while iDatalink Maestro compatibility can support retained vehicle features in compatible applications. Vehicle-specific mounting hardware, wiring adapters, steering-wheel-control interfaces, cameras, amplifiers, and satellite-radio hardware may be required separately depending on the installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Smartphone Integration:\u003c\/strong\u003e Supports wired Apple CarPlay and wired Android Auto through the rear USB connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.8-Inch Capacitive Display:\u003c\/strong\u003e WVGA touchscreen provides direct control of compatible apps, sources, and receiver settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Bluetooth:\u003c\/strong\u003e Enables hands-free calling, wireless music streaming, and connection registration for up to five phones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Band Audio Tuning:\u003c\/strong\u003e Graphic EQ, crossover controls, time alignment, and subwoofer adjustment help tailor system sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera-Ready Input:\u003c\/strong\u003e A dedicated backup-camera input supports an optional rear-view camera and parking assist lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Expansion:\u003c\/strong\u003e Six-channel 4-volt RCA preouts, HD Radio, SiriusXM readiness, and Maestro compatibility support further upgrades.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DMH-2000NEX has a fixed-face, 2-DIN L-shaped chassis with a 6.8-inch, 16:9 capacitive TFT display. Its LED-backlit screen supports brightness, dimmer, illumination timer, and color-customization settings. The chassis measures 7 inches wide by 3-7\/8 inches high by 4-7\/8 inches deep, with a compact 1\/8-inch nose depth beyond the chassis face.\u003c\/p\u003e\u003cp\u003eConfirm double-DIN dash opening, mounting depth, trim-panel requirements, and vehicle electronics compatibility before installation. The included harnesses, USB extension, microphone, GPS antenna, and installation hardware support the receiver itself, but most vehicles require a vehicle-specific dash kit and wiring interface. Use the rear USB connection for CarPlay or Android Auto, add a compatible camera for reverse-view capability, and use the 4-volt preouts when integrating external amplification.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809478041791,"sku":"DMH-2000NEX","price":336.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61KYRXURw5L.jpg?v=1783109920"},{"product_id":"pioneer-dmh-w3000nex","title":"Pioneer DMH-W3000NEX 6.8\" Double DIN Digital Media Receiver","description":"\u003cp\u003eThe Pioneer DMH-W3000NEX is a 6.8-inch touchscreen digital media receiver for vehicles that accept a double-DIN installation. It modernizes an existing dash with smartphone-focused control, Bluetooth calling and streaming, USB media playback, and radio reception. Its L-shaped 2-DIN chassis is designed to provide installation flexibility while retaining a conventional in-dash form factor.\u003c\/p\u003e\u003cp\u003eThis receiver is suited to drivers who want Apple CarPlay or Android Auto access without needing to plug in every trip. Both platforms support wired USB and wireless connections with compatible phones, making it easier to use navigation, music, calls, messages, and voice control through the vehicle display. Built-in Wi-Fi and Bluetooth support the wireless smartphone experience.\u003c\/p\u003e\u003cp\u003eFor audio system upgrades, the DMH-W3000NEX includes a MOSFET four-channel amplifier, six-channel 4-volt RCA preouts, a 13-band graphic equalizer, and built-in DSP. Standard and network speaker modes provide useful configuration options for conventional front\/rear speaker systems or more advanced active systems. Adjustable crossover, time-alignment, speaker-level, and subwoofer controls help tailor the system to the vehicle and installed equipment.\u003c\/p\u003e\u003cp\u003eThe 6.8-inch WVGA capacitive touchscreen uses an 800 x 480 TFT active-matrix display. A quick-access navigation bar is intended to make switching between smartphone interfaces and receiver settings more direct. USB playback supports a broad range of audio, video, and image files for drivers who keep media on compatible storage devices.\u003c\/p\u003e\u003cp\u003eThe receiver can serve as the central control point for a larger aftermarket system. It provides a dedicated backup-camera input with adjustable parking-assist guidelines, is SiriusXM-ready with a separately sold tuner and subscription, and supports steering-wheel-control integration with a separately sold adapter. An optional iDatalink Maestro module can add supported vehicle-information and vehicle-feature integration when matched to the vehicle.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless Smartphone Integration:\u003c\/strong\u003e Supports wired or wireless Apple CarPlay and Android Auto with compatible phones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.8-Inch Capacitive Touchscreen:\u003c\/strong\u003e Provides responsive control with WVGA 800 x 480 resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Bluetooth:\u003c\/strong\u003e Enables hands-free calling, audio streaming, and dual-phone connection capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced Audio Tuning:\u003c\/strong\u003e Includes DSP, a 13-band EQ, crossover controls, and time alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Volt RCA Preouts:\u003c\/strong\u003e Six-channel preouts support connection to external amplifiers and subwoofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackup Camera Ready:\u003c\/strong\u003e Accepts an optional rear-view camera and offers adjustable parking-assist guidelines.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DMH-W3000NEX uses a fixed-face, 6.8-inch capacitive touchscreen with a 2-DIN L-shaped chassis. Its display is a TFT active-matrix panel with LED backlighting, and the receiver has a compact 125 mm chassis depth. Physical volume controls and touchscreen controls provide access to core functions.\u003c\/p\u003e\u003cp\u003eConfirm dash opening, chassis depth, and vehicle-specific mounting requirements before purchase. Installation requires appropriate vehicle wiring integration, and steering-wheel controls require a compatible separately sold adapter; a rear-view camera, SiriusXM tuner, and iDatalink Maestro module are also optional accessories. Pioneer recommends installation by trained mobile-electronics personnel, particularly when integrating factory vehicle systems, a camera, or external amplifiers.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809478074559,"sku":"DMH-W3000NEX","price":363.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61Tb3ngjChL.jpg?v=1783109924"},{"product_id":"pioneer-mvh-s322bt","title":"Pioneer MVH-S322BT Single DIN Digital Media Receiver","description":"\u003cp\u003eThe Pioneer MVH-S322BT is a Single DIN digital media receiver for drivers who want modern smartphone connectivity in a compact dashboard format. It combines AM\/FM radio, Bluetooth audio and calling, front USB playback, and a front 3.5 mm auxiliary input. Its shallow 3-7\/8-inch chassis depth can be useful when installing in vehicles with limited radio-cavity space.\u003c\/p\u003e\u003cp\u003eThis receiver is designed for music libraries and streaming rather than disc playback. It supports MP3, WMA, AAC, FLAC, and WAV files from compatible USB devices, while Bluetooth provides a wireless option for music and calls. A supplied external microphone supports hands-free calling and voice-control functions.\u003c\/p\u003e\u003cp\u003eSound adjustment is a central part of the MVH-S322BT design. Its built-in MOSFET amplifier supplies up to 50 watts by four channels of maximum power, with a 13-band graphic equalizer, adjustable high- and low-pass filters, subwoofer control, and manual time alignment. Advanced Sound Retriever and Sound Retriever Air modes are also available to tailor playback from compressed sources.\u003c\/p\u003e\u003cp\u003ePioneer Smart Sync expands control through a compatible iPhone or Android device connected by USB or Bluetooth. The app can provide app-based source and sound controls, including access to a 31-band EQ setting. Amazon Alexa functionality is available when paired through Pioneer Smart Sync and the Alexa app.\u003c\/p\u003e\u003cp\u003eFor a system that may grow over time, the MVH-S322BT includes two pairs of 4-volt RCA preamp outputs. Its configurable rear speaker and RCA-output modes support common full-range and subwoofer system layouts. This makes it a practical foundation for a four-speaker system, a powered subwoofer, or external amplifiers.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth 4.0 Connectivity:\u003c\/strong\u003e Stream audio, make hands-free calls, and connect compatible devices wirelessly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront USB Input:\u003c\/strong\u003e Plays compatible digital music files and provides up to 1.5A charging output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Band Graphic EQ:\u003c\/strong\u003e Lets you refine tonal balance for your speakers and vehicle acoustics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePioneer Smart Sync:\u003c\/strong\u003e Adds app-based control and access to a 31-band EQ setting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4V RCA Preouts:\u003c\/strong\u003e Two pairs of preamp outputs support external amplifiers or subwoofer systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Crossovers:\u003c\/strong\u003e High-pass and low-pass filters help divide frequencies between speakers and subwoofers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MVH-S322BT uses a compact Single DIN chassis with a detachable faceplate, rotary volume control, LED backlighting, and a two-line VA LCD display. Brightness is adjustable from 1 to 10, with clock-synchronized or manual dimming settings. The front panel places the USB port and 3.5 mm stereo auxiliary input within easy reach.\u003c\/p\u003e\u003cp\u003eInstallation requires a compatible Single DIN dashboard opening and adequate clearance for the 97 mm chassis depth. The package includes a wiring harness, mounting sleeve, trim ring, microphone, mounting hardware, removal tools, and related brackets; vehicle-specific dash kits, wiring interfaces, antenna adapters, and steering-wheel-control adapters may be needed depending on the vehicle. Configure the rear speaker\/RCA-output mode during setup to match a full-range or subwoofer system layout.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809478303935,"sku":"MVH-S322BT","price":129.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61ajyMWDRGL.jpg?v=1783109935"},{"product_id":"pioneer-gm-dx871","title":"Pioneer GM-DX871 Class D Mono Subwoofer Amplifier","description":"\u003cp\u003eThe Pioneer GM-DX871 is a Class D mono amplifier designed to add dedicated subwoofer power to a vehicle audio system. It provides a single amplified channel for bass reproduction and supports loads from 1 to 8 ohms. It is suited to systems that need a compact amplifier for one subwoofer or a parallel-wired pair of subwoofers.\u003c\/p\u003e\u003cp\u003eWith continuous output ratings of 300 watts RMS at 4 ohms, 500 watts RMS at 2 ohms, and 800 watts RMS at 1 ohm, the GM-DX871 offers flexible power matching for compatible subwoofers. Its Class D design is intended to deliver substantial bass power in a relatively compact chassis. The amplifier is CTA-2006 compliant for its published power ratings.\u003c\/p\u003e\u003cp\u003eA variable low-pass filter lets the installer select a cutoff point from 40 Hz to 240 Hz. This helps keep low-frequency duties focused on the subwoofer while allowing the bass blend to be tailored to the vehicle and speaker system. The filter uses a -12 dB\/octave slope.\u003c\/p\u003e\u003cp\u003eThe GM-DX871 supports both RCA-level and speaker-level signal connections. Its supplied speaker-input wire with RCA pin cord can help integrate the amplifier with factory radios that do not provide RCA preamp outputs. Automatic input-signal detection selects between RCA-level and speaker-level input modes.\u003c\/p\u003e\u003cp\u003eA wired bass boost remote is included for convenient adjustment from the listening position. The remote controls bass boost from 0 to 18 dB at 50 Hz, while the amplifier's gain controls support a range of source-output levels. Gold-plated RCA terminals and high-current electronic components support its role as a dedicated bass amplifier in an upgraded car audio system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMono Class D Design:\u003c\/strong\u003e Delivers dedicated power for a subwoofer system in a compact amplifier format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e800W RMS at 1 Ohm:\u003c\/strong\u003e Supports high-output compatible subwoofer configurations at 14.4 volts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Low-Pass Filter:\u003c\/strong\u003e Adjusts the bass cutoff frequency from 40 Hz to 240 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Bass Remote:\u003c\/strong\u003e Allows accessible adjustment of bass boost from the front seat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker-Level Input:\u003c\/strong\u003e Enables connection to many factory radios without RCA outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection Monitoring:\u003c\/strong\u003e Helps protect the amplifier during overheating, DC output, or speaker short conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GM-DX871 uses a compact chassis measuring 252 mm wide, 60 mm high, and 215 mm deep. It incorporates high-current electronic components, gold-plated RCA terminals, a POWER\/PROTECT status indicator, gain control, and low-pass filter control. The protection system indicates abnormal conditions through the POWER\/PROTECT indicator and can mute or shut down output when necessary.\u003c\/p\u003e\u003cp\u003eUse properly sized power and ground wiring, with the same gauge for both; Pioneer specifies 6 AWG for runs under 3.6 m and 4 AWG for runs under 6.4 m. A separately sold 100 A fuse should be installed within 30 cm of the battery's positive terminal, and speaker wire should be 8 to 16 AWG. Mount the amplifier securely in a ventilated location, keep it clear of carpeting, and match the connected subwoofer configuration to the amplifier's 1 to 8 ohm allowable load range.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809478631615,"sku":"GM-DX871","price":139.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/611QlbB2r5L.jpg?v=1783109950"},{"product_id":"pioneer-gm-dx874","title":"Pioneer GM-DX874 4-Channel Class-D Car Amplifier","description":"\u003cp\u003eThe Pioneer GM-DX874 is a bridgeable four-channel car amplifier designed to add clean, configurable power to an upgraded vehicle audio system. It can drive front and rear speakers independently, or be configured for two- or three-channel applications including a bridged subwoofer channel. This makes it a practical choice for listeners building a full-range system now or planning a staged upgrade.\u003c\/p\u003e\u003cp\u003eIts continuous output is rated at 100 watts RMS per channel at 4 ohms, 150 watts RMS per channel at 2 ohms, and 300 watts RMS per bridged pair at 4 ohms. The wide 10 Hz to 50 kHz frequency response supports full-range speaker systems and high-resolution playback-capable sources. Class-D operation helps deliver this power from a compact chassis that is easier to place than many conventional amplifiers.\u003c\/p\u003e\u003cp\u003eSeparate variable high-pass and low-pass filtering lets the GM-DX874 be matched to speakers or subwoofers. Both crossover ranges adjust from 40 Hz to 500 Hz with a 12 dB\/octave slope. This helps remove unnecessary low bass from smaller speakers or limit a subwoofer channel to low-frequency content.\u003c\/p\u003e\u003cp\u003eThe amplifier accepts RCA-level and speaker-level signals, allowing it to work with many aftermarket receivers as well as compatible factory-radio systems. Automatic signal sensing can turn the amplifier on when it detects a speaker-level input signal, though a system remote wire may be needed with some head units. A two-channel\/four-channel input selector provides additional flexibility when planning system wiring.\u003c\/p\u003e\u003cp\u003eFor bass-focused channel B setups, the included wired bass boost remote adjusts 50 Hz boost from 0 dB to 18 dB. Gold-plated RCA connections, audio film capacitors, and a low-impedance output-filter coil support the amplifier's signal path. Built-in protection monitors abnormal conditions and can mute or shut down output if overheating, DC output, or a speaker-wire short is detected.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Class-D Amplification:\u003c\/strong\u003e Powers four speakers or supports bridged system configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W RMS Per Channel:\u003c\/strong\u003e Delivers rated continuous power at 4-ohm stereo loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable HPF And LPF:\u003c\/strong\u003e Adjusts crossover points from 40 Hz to 500 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Resolution Frequency Range:\u003c\/strong\u003e Extends from 10 Hz to 50 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker-Level Input:\u003c\/strong\u003e Connects to compatible factory-radio speaker outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Bass Boost Remote:\u003c\/strong\u003e Adjusts channel B bass boost from 0 dB to 18 dB.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GM-DX874 uses a compact 252 mm × 60 mm × 215 mm chassis and weighs 2.5 kg without wiring leads. Its connection layout includes RCA inputs for channels A and B, an RCA pass-through output from channel A, block-style power and speaker terminals, and a POWER\/PROTECT indicator. The amplifier incorporates gold-plated RCA connections and a protection system for temperature, DC-output, and short-circuit conditions.\u003c\/p\u003e\u003cp\u003eInstall it in a rigid, well-ventilated location with clearance above the chassis; do not cover it with carpet or a floor mat. The amplifier is intended for 12 V negative-ground vehicles and requires separately sold battery, ground, signal, and fuse components; Pioneer specifies an 80 A external battery-line fuse within 30 cm of the positive battery terminal. Use 8 AWG to 16 AWG speaker wire, match speaker impedance to the selected configuration, and set gain and crossover controls after wiring is complete.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809478762687,"sku":"GM-DX874","price":156.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61nQcSz1iqL.jpg?v=1783109953"},{"product_id":"pioneer-gm-dx971","title":"Pioneer GM-DX971 Class D Mono Subwoofer Amplifier","description":"\u003cp\u003eThe Pioneer GM-DX971 is a mono Class D amplifier designed to add dedicated subwoofer power to a car audio system. It is built for systems that need stronger low-frequency output than a receiver or full-range amplifier can provide alone. With a stable operating range down to 1 ohm, it offers multiple wiring and power-matching options for compatible subwoofers.\u003c\/p\u003e\u003cp\u003eThis amplifier is intended for listeners building a focused bass section in a factory or aftermarket audio system. Its output is rated at 500 watts RMS at 4 ohms, 800 watts RMS at 2 ohms, and 1,200 watts RMS at 1 ohm. A variable low-pass filter helps keep upper frequencies out of the subwoofer channel for a more controlled bass blend.\u003c\/p\u003e\u003cp\u003eClass D amplification helps the GM-DX971 deliver substantial subwoofer power from a compact chassis. The amplifier covers a 10 Hz to 240 Hz frequency response and includes a 50 Hz bass-boost circuit adjustable from 0 dB to 18 dB. A wired bass remote lets the driver adjust bass boost level from an accessible location.\u003c\/p\u003e\u003cp\u003eThe GM-DX971 supports both RCA-level and speaker-level signal connections. Its supplied speaker input wire with RCA pin cord can connect to speaker outputs from a factory radio, and the amplifier can automatically turn on from speaker-level signal with compatible head units. Gold-plated RCA terminals and a high-current circuit design support reliable signal and power connections.\u003c\/p\u003e\u003cp\u003eFor a complete bass upgrade, pair the GM-DX971 with subwoofer wiring that produces a final load between 1 and 8 ohms. Pioneer specifies suitable subwoofer nominal-power minimums of 500 watts at 4 ohms, 800 watts at 2 ohms, or 1,200 watts at 1 ohm. Built-in protection monitors abnormal operating conditions, while the compact dimensions help fit the amplifier in a range of vehicle installations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Channel Class D Design:\u003c\/strong\u003e Delivers dedicated mono amplification for a subwoofer system in a compact format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,200W RMS at 1 Ohm:\u003c\/strong\u003e Provides its highest continuous output into a properly wired 1-ohm load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Low-Pass Filter:\u003c\/strong\u003e Adjusts the subwoofer cutoff point from 40 Hz to 240 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Bass Remote:\u003c\/strong\u003e Lets you adjust 50 Hz bass boost from the driver’s seat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA and Speaker-Level Inputs:\u003c\/strong\u003e Works with aftermarket receivers and many factory-radio installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection Circuitry:\u003c\/strong\u003e Helps protect the amplifier during overheating, DC output, and speaker-wire shorts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GM-DX971 uses a compact 11-7\/8-inch-wide chassis with a heat-dissipation-focused structure and Pioneer Total Vibration Control design. Gold-plated RCA terminals are used for the signal connections, and the amplifier includes a POWER\/PROTECT status indicator. Three 40-amp onboard fuses are installed in the amplifier.\u003c\/p\u003e\u003cp\u003eMount the amplifier on a flat, rigid surface with open space above it for ventilation; do not cover it with carpet or a floor mat. The manual specifies a separately sold 150-amp battery-line fuse and equal-size battery and ground wiring, with 6 AWG recommended below 11 ft. 10 in. and 4 AWG below 20 ft. 12 in. Set gain and low-pass filtering to match the source unit and subwoofer system, and keep the final speaker load between 1 and 8 ohms.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809478795455,"sku":"GM-DX971","price":253.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61MiN94o2bL.jpg?v=1783109956"},{"product_id":"pioneer-gm-dx975","title":"Pioneer GM-DX975 5-Channel Class-D Car Amplifier","description":"\u003cp\u003eThe Pioneer GM-DX975 is a five-channel Class-D car amplifier designed to power front speakers, rear speakers, and a subwoofer from one compact chassis. It is suited to drivers building a complete amplified audio system without adding separate full-range and mono amplifiers. Its five-channel layout provides dedicated amplification for a four-speaker system plus bass reinforcement.\u003c\/p\u003e\u003cp\u003eAt 4 ohms, the GM-DX975 delivers 75 watts RMS to each of four full-range channels and 350 watts RMS to its subwoofer channel. The subwoofer channel can provide up to 600 watts RMS at 2 ohms, while the full-range channels can be bridged for a three-channel configuration. This flexibility supports conventional front-and-rear speaker systems as well as systems focused on amplified front components and a subwoofer.\u003c\/p\u003e\u003cp\u003eClass-D amplification helps deliver substantial output in a compact format suited to space-conscious vehicle installations. The full-range channels extend to 50 kHz and the amplifier is Hi-Res Audio Certified, making it appropriate for systems intended to preserve extended high-frequency playback. Gold-plated RCA terminals and high-grade electronic components support dependable signal connections within a properly installed system.\u003c\/p\u003e\u003cp\u003eBuilt-in crossover controls allow the system to be tailored to the speakers and subwoofer being used. The A\/B channels offer selectable high-pass or low-pass filtering from 40 Hz to 500 Hz, while the subwoofer channel includes an adjustable low-pass filter in the same range. A selectable subwoofer low-pass slope and bass boost control add further tuning options for bass integration.\u003c\/p\u003e\u003cp\u003eThe GM-DX975 can accept RCA-level signals or speaker-level signals from a compatible factory or aftermarket stereo. Its speaker-level input can automatically turn the amplifier on when it detects a head-unit speaker signal, though this function may not work with every head unit. A wired bass boost remote is included for convenient adjustment of subwoofer bass boost from the listening position.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive-Channel Layout:\u003c\/strong\u003e Powers four full-range speaker channels and one dedicated subwoofer channel from a single amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass-D Amplification:\u003c\/strong\u003e Provides efficient amplified power in a compact chassis for vehicle audio installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi-Res Audio Certified:\u003c\/strong\u003e Full-range response extends to 50 kHz for compatible high-resolution audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Power Configuration:\u003c\/strong\u003e Supports five-channel operation or three-channel operation with bridged full-range channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Crossovers:\u003c\/strong\u003e Adjustable high-pass and low-pass filters help match output to speakers and subwoofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Bass Remote:\u003c\/strong\u003e Lets the listener adjust subwoofer bass boost from an accessible mounted location.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GM-DX975 uses a compact 302 mm-wide chassis with high-grade electronic components and gold-plated RCA terminals. Its layout includes gain controls, filter controls, input-selection switches, power\/protection indication, speaker-level input, and a connection for the wired bass boost remote. The protection system monitors abnormal conditions including output shorts, DC voltage at the speaker output, and excessive internal temperature.\u003c\/p\u003e\u003cp\u003eInstall the amplifier on a rigid surface with adequate ventilation above the chassis, and do not cover it with carpet or a floor mat. It requires a 12-volt negative-ground vehicle electrical system, with separately sold battery and ground wiring sized for the installation length; speaker and subwoofer wire should be 12 to 16 AWG. Use RCA inputs with an aftermarket receiver or the supplied-style speaker-input connection method with compatible factory speaker outputs, but do not connect both input types at the same time.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809478828223,"sku":"GM-DX975","price":303.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61nNIJ0ctFL.jpg?v=1783109959"},{"product_id":"pioneer-gm-me400x4","title":"Pioneer GM-ME400X4 4-Channel Marine Amplifier","description":"\u003cp\u003eThe Pioneer GM-ME400X4 is a four-channel Class D marine amplifier built to add dedicated power to a boat audio system. It supplies clean amplification for marine speakers while allowing flexible four-, three-, or two-channel system layouts. It is intended for 12-volt, negative-ground boat electrical systems.\u003c\/p\u003e\u003cp\u003eAt 4 ohms, the amplifier delivers 75 watts RMS to each of its four channels, providing a practical match for many marine speaker systems. It can also deliver higher output into lower impedance loads when the speaker system is designed accordingly. For bridged applications, it can power two channels at up to 300 watts RMS each into 2 ohms.\u003c\/p\u003e\u003cp\u003eIts Class D amplifier design helps keep the chassis compact while providing multi-channel output for speakers, subwoofers, or a mixed system. Independent Channel A and Channel B gain and crossover controls allow the amplifier to be adjusted for separate speaker zones or different driver types. The selectable 2-channel or 4-channel input mode also accommodates source units with different numbers of preamp outputs.\u003c\/p\u003e\u003cp\u003eMarine-focused details include a conformal-coated circuit board and supplied covers for the panel and fuses. These measures help protect connection and control areas, but the amplifier is not submersible and must be installed in a dry, well-ventilated location. Its protection system monitors abnormal conditions including overheating, DC at the speaker outputs, and speaker-wire shorts.\u003c\/p\u003e\u003cp\u003eThe GM-ME400X4 can be used to run four full-range speakers, a stereo pair plus a bridged subwoofer channel, or two bridged channels where impedance requirements are observed. Variable high-pass and low-pass filters help tailor the amplified signal to the connected speakers or subwoofers. RCA-level and speaker-level input capability supports upgrades with a wide range of marine source units.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Class D Design:\u003c\/strong\u003e Powers multiple marine speakers from a compact amplifier chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Per Channel:\u003c\/strong\u003e Delivers rated output at 4 ohms across four channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Channel Pairs:\u003c\/strong\u003e Supports higher-power two-channel or mixed-system configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable HPF And LPF:\u003c\/strong\u003e Lets you tailor frequency output for speakers or subwoofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA And Speaker-Level Inputs:\u003c\/strong\u003e Works with preamp-equipped and factory-style source outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Oriented Protection:\u003c\/strong\u003e Uses a conformal-coated PCB and supplied protective covers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GM-ME400X4 uses a compact chassis measuring 252 x 60 x 215 mm and weighs 2.4 kg without wiring leads. It has block-type speaker terminals, a negative-ground electrical design, and two installed 30-amp fuses. The conformal-coated circuit board is intended for marine use, while the supplied panel and fuse covers help shield the control and fuse areas.\u003c\/p\u003e\u003cp\u003eInstall the amplifier on a flat surface in a dry, ventilated area away from direct water exposure, extreme heat, and high humidity. It requires separately sold power, ground, signal, and remote wiring as applicable, plus a separately sold 60-amp battery-line fuse. Use the variable HPF for full-range speakers, LPF for subwoofers, and observe the amplifier's impedance limits when wiring bridged channels.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809478860991,"sku":"GM-ME400X4","price":174.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/1_b20b9bf1-c0d4-42d9-89d3-16ba2b0ace60.jpg?v=1783109962"},{"product_id":"pioneer-dmh-wt6000nex","title":"Pioneer DMH-WT6000NEX 10.1\" Single DIN Multimedia Receiver","description":"\u003cp\u003eThe Pioneer DMH-WT6000NEX is a Single DIN digital multimedia receiver designed for vehicles that need a large, modern touchscreen without converting the dash to a Double DIN opening. Its 10.1-inch floating HD display places key entertainment, communication, navigation, and camera functions within easy view. It is a practical upgrade for drivers replacing a factory radio or adding smartphone-focused media control to an existing audio system.\u003c\/p\u003e\u003cp\u003eWired and wireless Apple CarPlay and Android Auto let compatible phones bring familiar navigation, calling, messaging, and music apps to the receiver’s touchscreen. Built-in Bluetooth also supports hands-free calling and wireless audio streaming. The receiver is suited to commuters and road-trip drivers who want less cable dependence while retaining wired connection options.\u003c\/p\u003e\u003cp\u003eFor everyday listening, the DMH-WT6000NEX combines built-in HD Radio with SiriusXM readiness and USB media playback. Its internal amplifier is rated for 22 watts RMS per channel into 4 ohms under the stated test conditions, while 4-volt preouts support the addition of external amplifiers. A 13-band graphic equalizer, selectable crossover settings, time alignment, and speaker-level adjustment provide useful tuning tools for factory-replacement and amplified systems.\u003c\/p\u003e\u003cp\u003eThe floating touchscreen uses a 1280 x 720 RGB display and capacitive touch operation. Pioneer’s Luminous Bar adds visual status and navigation-related lighting functions, while split-screen operation can show multiple functions at once. The PxLink companion app supports home-screen customization, notifications, and wireless firmware updates when used with a compatible smartphone.\u003c\/p\u003e\u003cp\u003eCamera expandability helps make this receiver part of a more complete vehicle upgrade. It supports a back-up camera input and a second camera input, with selectable video-signal settings and adjustable parking-assist guidelines for the rear camera. Compatibility with iDatalink Maestro and Metra Axxess interfaces can also help retain or display select vehicle information and controls when paired with the appropriate vehicle-specific hardware.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10.1-Inch Floating HD Display:\u003c\/strong\u003e A large capacitive touchscreen mounts in front of the radio opening for clear, accessible control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless Smartphone Integration:\u003c\/strong\u003e Supports wired or wireless Apple CarPlay and Android Auto with compatible smartphones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In HD Radio:\u003c\/strong\u003e Receives compatible digital AM\/FM broadcasts alongside standard radio listening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced Audio Tuning:\u003c\/strong\u003e A 13-band EQ, crossovers, time alignment, and 4-volt preouts support system tuning and expansion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Camera Capability:\u003c\/strong\u003e Connect a rear camera and second camera for added visibility and selectable viewing options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePxLink Connectivity:\u003c\/strong\u003e Use the companion app for home-screen customization, notifications, and wireless firmware updates.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DMH-WT6000NEX uses a separate 1-DIN chassis and floating 10.1-inch monitor assembly. The screen has a 16:9 capacitive TFT active-matrix display, and its adjustable floating arrangement is intended to position the monitor ahead of the factory radio location. The Luminous Bar is integrated below the display for additional visual feedback.\u003c\/p\u003e\u003cp\u003eVerify both Single DIN mounting compatibility and adequate dash clearance for the floating monitor before purchase. Professional installation is recommended because vehicle-specific wiring harnesses, antenna adapters, steering-wheel-control interfaces, dash kits, camera wiring, and iDatalink or Metra modules may be required depending on the vehicle. The included GPS antenna should be installed and connected for wireless Apple CarPlay operation.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809478893759,"sku":"DMH-WT6000NEX","price":823.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61Gk7X0fgiL.jpg?v=1783109965"},{"product_id":"pioneer-avh-1550nex","title":"Pioneer AVH-1550NEX 6.2\" Double DIN CarPlay DVD Receiver","description":"\u003cp\u003eThe Pioneer AVH-1550NEX is a double-DIN DVD multimedia receiver designed to bring touchscreen control, smartphone access, and expanded audio adjustment to a compatible vehicle. Its 6.2-inch widescreen display provides a central interface for music, calls, camera viewing, and supported mobile apps. It is a practical upgrade for drivers replacing a factory radio with a system that supports modern phone connectivity while retaining a traditional disc drive.\u003c\/p\u003e\u003cp\u003eWired Apple CarPlay places compatible iPhone functions on the receiver display for navigation, calling, messaging, and music control through an in-dash interface. Built-in Bluetooth supports hands-free calling and wireless audio streaming, while WebLink offers access to supported smartphone applications through a USB connection. Alexa voice-control compatibility adds another supported voice-command option when used with a compatible mobile device and app setup.\u003c\/p\u003e\u003cp\u003eThe AVH-1550NEX combines its internal four-channel amplifier with 4-volt front, rear, and subwoofer preamp outputs for flexible system planning. Its 13-band graphic equalizer, crossover controls, time alignment, and subwoofer adjustment tools help tailor the system to the vehicle and installed speakers. This makes it suitable for a straightforward speaker replacement as well as a system using external amplifiers and a subwoofer.\u003c\/p\u003e\u003cp\u003eFor entertainment, the receiver plays CD, DVD, USB, Bluetooth audio, AM\/FM radio, and compatible connected-device content. MIXTRAX adds an automated music-mix presentation with visual effects for supported audio playback. The built-in tuner also supports RDS information, and SiriusXM capability is available with a compatible optional tuner and subscription.\u003c\/p\u003e\u003cp\u003eThe AVH-1550NEX is designed as a system hub rather than just a radio replacement. It includes rear USB, AV, auxiliary, camera, video-output, and preamp connections to support accessories and future expansion. Compatibility with iDatalink Maestro, where applicable and with the required module, can help integrate select factory vehicle features and information screens.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.2-Inch Touchscreen:\u003c\/strong\u003e Widescreen TFT display provides direct control of audio, video, settings, and supported apps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Apple CarPlay:\u003c\/strong\u003e Connect a compatible iPhone by USB for in-dash access to supported CarPlay functions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth 4.1:\u003c\/strong\u003e Supports hands-free calling, phone-book access, and wireless music streaming from compatible devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Volt Six-Channel Preouts:\u003c\/strong\u003e Front, rear, and subwoofer outputs support external amplifiers and a more expandable audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVD And USB Playback:\u003c\/strong\u003e Plays compatible discs and USB media, including common audio, video, and image formats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Camera Inputs:\u003c\/strong\u003e Supports a rear camera plus a second compatible camera input for added visibility options.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AVH-1550NEX uses a 6.2-inch, 16:9 TFT active-matrix touchscreen within a standard double-DIN chassis. Its chassis measures 178 mm wide by 100 mm high by 164 mm deep, with a 171 mm by 97 mm nose section. Pioneer specifies the physical dimensions and display construction, but does not publish a material composition for the receiver housing.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a double-DIN radio and plan for the appropriate vehicle-specific dash kit, wiring harness, antenna adapter, and steering-wheel-control interface if needed. Apple CarPlay requires a wired USB connection to a compatible iPhone, while camera, SiriusXM, iDatalink Maestro, and external-amplifier functions require their respective compatible accessories or modules. Connect the parking-brake lead correctly; several setup and video functions are intended for use only when the vehicle is safely parked.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809478926527,"sku":"AVH-1550NEX","price":390.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71k4J2Vz0dL.jpg?v=1783109968"},{"product_id":"pioneer-avh-240ex","title":"Pioneer AVH-240EX 6.2\" Double DIN DVD Receiver","description":"\u003cp\u003eThe Pioneer AVH-240EX is a Double DIN DVD RDS receiver designed for vehicles that need a touchscreen-based upgrade with disc playback, Bluetooth connectivity, and camera expandability. Its 6.2-inch WVGA resistive touchscreen brings radio, USB media, compatible smartphone functions, and auxiliary sources into one dashboard component. It is suited to drivers replacing a factory radio while retaining straightforward physical media playback.\u003c\/p\u003e\u003cp\u003eBuilt-in Bluetooth supports hands-free calling and wireless audio streaming from compatible devices. The receiver can register up to five phones and includes an external microphone for calling. USB playback, AUX input, AM\/FM radio, and DVD\/CD capability provide multiple options for everyday listening and viewing while parked.\u003c\/p\u003e\u003cp\u003eFor sound adjustment, the AVH-240EX uses a built-in MOSFET four-channel amplifier, 13-band graphic equalizer, DSP, and high-pass and low-pass crossover controls. Its audio settings allow the system to be tailored for factory speakers or an upgraded speaker-and-subwoofer system. Three preout sections provide front, rear, and subwoofer signal connections for external amplification.\u003c\/p\u003e\u003cp\u003eThe fixed 6.2-inch display uses an LED backlight, 800 x 480 resolution, and a 16:9 aspect ratio. It supports a PAL\/NTSC-compatible video display and includes brightness, dimmer, and display-off functions. The receiver also provides a dedicated rear-view camera input and an RCA video output for an additional rear-seat display.\u003c\/p\u003e\u003cp\u003eSmartphone integration includes WebLink 2.0, Siri Eyes Free for compatible iPhones, and Amazon Alexa functionality when paired with the Pioneer Vozsis app. It supports USB playback of common audio, image, and video formats, including FLAC and WAV audio. This makes the AVH-240EX a practical centerpiece for a Double DIN multimedia system with optional camera and amplifier expansion.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.2-Inch WVGA Touchscreen:\u003c\/strong\u003e Provides touchscreen control in a standard Double DIN chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVD And CD Playback:\u003c\/strong\u003e Plays supported DVD-Video, Video CD, CD, and recordable disc media.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Bluetooth:\u003c\/strong\u003e Enables compatible hands-free calling and wireless audio streaming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Band Graphic Equalizer:\u003c\/strong\u003e Allows detailed tonal adjustment for the vehicle acoustic environment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree Preout Sections:\u003c\/strong\u003e Supports front, rear, and subwoofer connections for external amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Camera Input:\u003c\/strong\u003e Accepts a dedicated compatible rear-view camera connection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AVH-240EX uses a fixed-face Double DIN design with a resistive touchscreen, LED backlight, and integrated DVD mechanism. Its chassis measures 7 inches wide by 3-7\/8 inches high by 6-3\/8 inches deep, while the nose section measures 6-3\/4 inches wide by 3-7\/8 inches high by 1\/8 inch deep. The unit has a negative-ground electrical system and is intended for 12-volt vehicle electrical systems.\u003c\/p\u003e\u003cp\u003eVerify Double DIN dash fitment, mounting depth, and the vehicle-specific harness and dash-kit requirements before purchase. The parking-brake lead must be connected correctly, and rear-camera integration may require a separate adapter depending on the vehicle. Remove the two transport screws before installing the receiver so its disc mechanism can operate correctly.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809478959295,"sku":"AVH-240EX","price":191.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61Os9pJMxML.jpg?v=1783109971"},{"product_id":"pioneer-avh-241ex","title":"Pioneer AVH-241EX 6.2\" Double DIN DVD Receiver","description":"\u003cp\u003eThe Pioneer AVH-241EX is a double-DIN multimedia receiver for drivers who want touchscreen control, CD\/DVD playback, Bluetooth calling, and conventional AM\/FM radio in one dashboard unit. Its 6.2-inch resistive touchscreen provides a compact, straightforward interface for music, video, phone functions, and compatible connected apps. It is designed as an upgrade for vehicles with a compatible double-DIN radio opening.\u003c\/p\u003e\u003cp\u003eBuilt-in Bluetooth supports hands-free calling and wireless audio streaming, helping keep a paired phone accessible without handling it while driving. The included external microphone supports the hands-free calling system. Bluetooth audio, USB media, AUX input, and disc playback give the receiver several practical source options.\u003c\/p\u003e\u003cp\u003eThe AVH-241EX uses a built-in MOSFET amplifier rated at 14 watts RMS x 4 channels under CTA-2006 testing, with 50 watts x 4 maximum output. Its 13-band graphic equalizer, high-pass and low-pass filters, subwoofer control, bass boost, and built-in DSP provide useful tools for tailoring sound to factory or upgraded speakers. Five channels of 2-volt RCA preamp outputs also support adding external amplification.\u003c\/p\u003e\u003cp\u003eFor media playback, the receiver handles CDs, DVDs, USB audio, and a broad selection of supported compressed audio and video files. USB audio compatibility includes MP3, WMA, AAC, WAV, and FLAC files, including FLAC files up to 192 kHz\/24-bit. The built-in DVD drive supports common CD, DVD, Video CD, and recordable disc formats for vehicles where physical media remains important.\u003c\/p\u003e\u003cp\u003eA dedicated rear camera input allows the AVH-241EX to display a compatible backup camera when reversing, making it suitable for a safety-focused system upgrade. WebLink 2.0 and Pioneer Vozsis compatibility add app-based smartphone functionality, including Amazon Alexa capability through the applicable paired apps. This receiver is a practical foundation for a conventional multimedia system with external amplifiers, a subwoofer, and a rear-view camera.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.2-Inch Resistive Touchscreen:\u003c\/strong\u003e Provides direct control of audio, video, phone, and system settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCD\/DVD Playback:\u003c\/strong\u003e Plays music CDs, DVD-Video, Video CDs, and supported recordable discs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth 4.2:\u003c\/strong\u003e Supports hands-free calling and wireless music streaming from compatible devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Band Equalizer:\u003c\/strong\u003e Allows detailed tonal adjustment for vehicle acoustics and speaker preferences.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-Channel RCA Preouts:\u003c\/strong\u003e Provides 2-volt outputs for adding external amplifiers and a subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackup Camera Input:\u003c\/strong\u003e Accepts a compatible rear-view camera for reverse-view display.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AVH-241EX uses a fixed-face double-DIN chassis with a 6.2-inch, 16:9 TFT active-matrix LCD display and LED backlight. Its screen resolution is 800 x 480 pixels, and the resistive touch panel is designed for direct touch operation. Brightness control, automatic or manual dimming, display-off mode, and a fixed blue illumination color support integration into a wide range of interiors.\u003c\/p\u003e\u003cp\u003eVerify dash opening, chassis depth, and vehicle-specific wiring requirements before installation; the chassis measures 7 x 3-7\/8 x 6-3\/8 inches. A vehicle-specific dash kit, wiring harness, antenna adapter, steering-wheel-control adapter, and backup camera may be needed depending on the vehicle and desired functions. Remove the two transport screws before installation so the DVD mechanism can operate, connect the included microphone in a suitable position, and leave space behind the unit for ventilation.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809478992063,"sku":"AVH-241EX","price":198.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/612a7c2gX3L.jpg?v=1783109974"},{"product_id":"pioneer-dmh-241ex","title":"Pioneer DMH-241EX 6.2\" Double DIN Digital Media Receiver","description":"\u003cp\u003eThe Pioneer DMH-241EX is a Double DIN digital media receiver built for drivers who want touchscreen control, Bluetooth connectivity, and USB media playback without adding a disc player. Its 6.2-inch resistive touchscreen brings source selection, radio controls, audio settings, and connected-device functions into a compact in-dash format. It is designed for vehicles with a compatible Double DIN radio opening and appropriate installation hardware.\u003c\/p\u003e\u003cp\u003eBuilt-in Bluetooth supports hands-free phone calls and wireless audio streaming, helping keep commonly used phone functions accessible through the receiver. The included external microphone supports clearer call pickup when installed near the driver. Up to five phones can be registered to the receiver for shared-vehicle convenience.\u003c\/p\u003e\u003cp\u003eFor music playback, the DMH-241EX supports USB storage devices and a broad selection of audio formats, including high-resolution FLAC and WAV files. Its 24-bit digital-to-analog converter, built-in DSP, 13-band graphic equalizer, loudness settings, and HPF\/LPF crossover controls provide practical tuning tools for factory-replacement and aftermarket speaker systems. The internal four-channel MOSFET amplifier is suited to directly powering compatible 4- to 8-ohm vehicle speakers.\u003c\/p\u003e\u003cp\u003eThe receiver is also ready for a rear-view camera through its dedicated camera input. When properly wired to the vehicle reverse signal and a compatible camera, the display can automatically switch to the rear camera view when reverse is selected. A rear video output is also provided for a separately installed rear-seat display.\u003c\/p\u003e\u003cp\u003eFor system expansion, the DMH-241EX provides front, rear, and subwoofer RCA preamp outputs with 2-volt output. This allows connection to external amplifiers while retaining onboard audio controls and subwoofer adjustment. WebLink 2.0 and Pioneer Vozsis compatibility add smartphone-based features, including Amazon Alexa capability when used with the compatible apps.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.2-Inch Touchscreen:\u003c\/strong\u003e Resistive touchscreen control gives the dash a clear, centralized interface for media and settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Connectivity:\u003c\/strong\u003e Stream music wirelessly and place hands-free calls using the included external microphone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB High-Resolution Audio:\u003c\/strong\u003e Plays FLAC and WAV files, including supported high-resolution content, from USB storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Band Equalizer:\u003c\/strong\u003e Fine-tune tonal balance with a customizable graphic EQ, DSP, loudness, and crossover controls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackup Camera Input:\u003c\/strong\u003e Add a compatible rear-view camera for reverse-view display functionality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive-Channel Preouts:\u003c\/strong\u003e Front, rear, and subwoofer preamp outputs support expansion with external amplification.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DMH-241EX uses a fixed-face Double DIN chassis with a 6.2-inch 16:9 resistive touchscreen and physical front-panel controls. Its compact chassis measures approximately 7 inches wide by 3-7\/8 inches high by 4-3\/8 inches deep, helping it fit installations where rear clearance is limited. The screen and fixed-face layout are intended for conventional in-dash mounting rather than detachable-face security use.\u003c\/p\u003e\u003cp\u003eInstallation requires a vehicle-specific dash kit and wiring interface when needed for the vehicle, plus antenna and steering-wheel-control adapters where applicable. The receiver includes a wiring harness, preout\/AV harness, microphone, remote control, and mounting screws; a backup camera, RCA cables, mini-jack AV cable, and steering-wheel-control adapter are separate items where required. Confirm dashboard opening, mounting depth, factory-camera retention requirements, and vehicle wiring compatibility before installation.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809479123135,"sku":"DMH-241EX","price":171.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61xjYATUXbL.jpg?v=1783109980"},{"product_id":"pioneer-dmh-w4600nex","title":"Pioneer DMH-W4600NEX 6.8\" Double-DIN Digital Media Receiver","description":"\u003cp\u003eThe Pioneer DMH-W4600NEX is a Double-DIN digital media receiver built to modernize a vehicle's dashboard with touchscreen control, smartphone integration, Bluetooth calling, and HD Radio. Its 6.8-inch WVGA capacitive touchscreen provides a familiar interface for music, navigation apps, calls, and compatible media. The short-chassis design helps address installations where behind-dash space is limited.\u003c\/p\u003e\u003cp\u003eThis receiver is designed for drivers who want wired or wireless Apple CarPlay and Android Auto without relying on a factory infotainment system. It supports voice control functions and has Amazon Alexa built in for compatible voice-enabled use. Built-in Wi-Fi supports tethering and hotspot connectivity, while the included microphone supports hands-free Bluetooth calling.\u003c\/p\u003e\u003cp\u003eFor audio tuning, the DMH-W4600NEX combines a built-in MOSFET amplifier with a 13-band graphic equalizer, 24-bit DAC, manual time alignment, and selectable crossover settings. Its sound controls include bass boost, loudness settings, Dynamic Bass Enhancer, listening-position selection, and subwoofer control. The result is a flexible platform for dialing in factory-replacement speakers or a more developed amplified system.\u003c\/p\u003e\u003cp\u003eThe receiver includes six channels of 4-volt RCA preamp outputs for connecting external amplifiers, plus a dedicated backup-camera input and RCA video output. It is SiriusXM-ready with a separately sold tuner and includes built-in HD Radio with RDS, Artist Experience, and multicasting support. USB media playback supports a wide selection of audio, video, and image formats for locally stored content.\u003c\/p\u003e\u003cp\u003eVehicle-integration support includes compatibility with iDatalink Maestro RR and RR2 modules as well as Metra Axxess interfaces. It is also steering-wheel-control ready when used with a separately sold adapter. This makes the DMH-W4600NEX a practical upgrade path for vehicles needing smartphone connectivity, camera support, and expanded audio-system control.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.8-Inch Capacitive Touchscreen:\u003c\/strong\u003e Provides responsive touchscreen operation in a compact Double-DIN format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless Smartphone Integration:\u003c\/strong\u003e Supports Apple CarPlay and Android Auto through wireless or wired USB connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort Chassis:\u003c\/strong\u003e Helps simplify installation in dashboards with limited rear mounting depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Band Graphic Equalizer:\u003c\/strong\u003e Lets you make detailed tonal adjustments for your vehicle and speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Volt RCA Preouts:\u003c\/strong\u003e Supplies six preamp channels for adding external amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated Camera Input:\u003c\/strong\u003e Accepts a backup camera and supports parking-assist lines.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DMH-W4600NEX uses a fixed-face, short-chassis Double-DIN layout centered around a 6.8-inch 16:9 WVGA capacitive touchscreen. Its control design combines touchscreen access with a built-in Bluetooth system, external GPS antenna support, and rear-panel connections for system expansion. Multi-language display support includes English, French, Spanish, Portuguese, and Simplified Chinese.\u003c\/p\u003e\u003cp\u003eConfirm Double-DIN dash compatibility and select the correct vehicle-specific dash kit, wiring harness, and antenna adapter before installation. A separately sold interface may be needed to retain factory steering-wheel controls or vehicle data functions, while SiriusXM requires a separately sold tuner. For the most complete setup, connect the included microphone, USB lead, optional backup camera, and external amplifiers or integration modules as needed.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809479155903,"sku":"DMH-W4600NEX","price":562.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/515OeFQ_6qL.jpg?v=1783109983"},{"product_id":"pioneer-dmh-w4660nex","title":"Pioneer DMH-W4660NEX 6.8\" Double DIN Multimedia Receiver","description":"\u003cp\u003eThe Pioneer DMH-W4660NEX is a double DIN digital multimedia receiver designed to update an in-dash system with a 6.8-inch capacitive touchscreen and modern smartphone integration. It gives drivers a central interface for compatible phone-based navigation, calls, messages, and music instead of relying on a factory radio with limited connectivity. Wireless and wired Apple CarPlay and Android Auto support offer flexible connection options for compatible devices.\u003c\/p\u003e\u003cp\u003eThis receiver is suited to drivers building a practical daily-use infotainment upgrade, whether replacing an older factory stereo or adding a touchscreen to a compatible double DIN dashboard. Built-in Bluetooth supports hands-free calling and wireless audio streaming, while dual-phone connection helps accommodate more than one regular driver. Amazon Alexa Built-in adds another voice-control option when connected and configured for use.\u003c\/p\u003e\u003cp\u003eFor audio systems, the DMH-W4660NEX combines a built-in four-channel MOSFET amplifier with six-channel, 4-volt RCA preamp outputs. Its 13-band graphic equalizer, DSP, manual time alignment, crossover controls, subwoofer control, and listening-position selector provide useful tools for tuning a factory-speaker system or an expanded amplified system. The receiver supports standard and network crossover modes for different system configurations.\u003c\/p\u003e\u003cp\u003eThe 6.8-inch WVGA capacitive display is paired with a short-chassis double DIN design for installations where behind-dash depth matters. Built-in HD Radio provides terrestrial radio reception, while SiriusXM readiness supports an optional compatible tuner. USB media playback supports a wide selection of audio, video, and image file formats, including high-resolution WAV, FLAC, and DSD audio playback.\u003c\/p\u003e\u003cp\u003eThe DMH-W4660NEX can serve as the control center for a broader vehicle upgrade. It provides a dedicated backup-camera input plus an A\/V or second-camera input, and it includes parking-assist line support. Compatibility with iDatalink Maestro, Metra Axxess, and separately sold steering-wheel-control adapters can help retain or add supported vehicle integration features when matched to the vehicle and installation hardware.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless Smartphone Integration:\u003c\/strong\u003e Supports both wired and wireless Apple CarPlay and Android Auto for compatible phones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.8-Inch Capacitive Display:\u003c\/strong\u003e The WVGA touchscreen provides a responsive interface for media, settings, and supported smartphone apps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Volt RCA Preouts:\u003c\/strong\u003e Six-channel preamp outputs provide a connection path for external amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Audio Tuning:\u003c\/strong\u003e A 13-band EQ, DSP, time alignment, crossovers, and subwoofer control help tailor system response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera-Ready Inputs:\u003c\/strong\u003e Supports a dedicated backup camera and an additional A\/V or second-camera input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHD Radio And SiriusXM Readiness:\u003c\/strong\u003e Includes HD Radio and supports SiriusXM with a separately sold compatible tuner.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DMH-W4660NEX uses a fixed-face, short-chassis 2-DIN layout with a 6.8-inch 16:9 WVGA capacitive touchscreen. Its display-focused design omits a detachable faceplate and includes a supplied remote control and external microphone. The rear connection layout provides speaker wiring, RCA preouts, USB-C, camera, A\/V, and integration connections for a flexible system layout.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a double DIN receiver and verify dashboard opening and available depth before purchase; the listed chassis dimensions are 7 inches wide by 3-7\/8 inches high by 3-3\/8 inches deep. Vehicle-specific mounting hardware, wiring interfaces, antenna adapters, steering-wheel-control adapters, cameras, amplifiers, and a SiriusXM tuner may be needed depending on the vehicle and desired functions. For retained factory features or camera integration, use a compatible iDatalink Maestro or Metra Axxess interface where applicable and follow the receiver and vehicle-interface installation instructions.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809479188671,"sku":"DMH-W4660NEX","price":579.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61Zl5JwCojL.jpg?v=1783109986"},{"product_id":"pioneer-ts-a878","title":"Pioneer TS-A878 3.5\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Pioneer TS-A878 is a pair of compact 3.5-inch, 2-way coaxial car speakers designed for factory-speaker replacement in vehicles with limited mounting space. It is suited to drivers who want clearer sound from dash, rear-panel, or other small speaker locations without changing the rest of the audio system. The custom-fit design is intended for select GM, Ford, and Volkswagen applications, subject to measurement and vehicle-specific fitment verification.\u003c\/p\u003e\u003cp\u003eIts coaxial layout places a PEI hard-dome tweeter over the woofer, allowing a single speaker location to cover both midrange and high-frequency content. This arrangement helps provide direct, intelligible vocals and defined treble from compact factory locations. With a 60 Hz to 28 kHz frequency range, the TS-A878 is focused on full-range support rather than deep-bass duty.\u003c\/p\u003e\u003cp\u003eThe 3.5-inch carbon- and graphite-reinforced IMPP cone is made for rigidity in a compact driver, while the PEI dome tweeter is designed for smooth high-frequency reproduction. The speaker has a 4-ohm nominal impedance for use with typical car-audio speaker outputs. Its 88 dB sensitivity supports use with modest-power factory or aftermarket head units.\u003c\/p\u003e\u003cp\u003ePower handling is rated at 60 watts maximum per pair and 15 watts nominal per speaker when used with the included in-line filter. This makes the TS-A878 a sensible match for factory radio power or conservatively matched aftermarket amplification. It should be paired with appropriate high-pass filtering when system tuning allows, especially when high output is desired.\u003c\/p\u003e\u003cp\u003eFor a balanced upgrade, the TS-A878 can be used to replace small factory speakers while larger door speakers or a subwoofer handle more of the midbass and low bass. Its compact 1-3\/8-inch mounting depth helps where clearance behind the mounting surface is limited. Confirm cutout size, depth, mounting tabs, and connector compatibility before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in one compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Sound Reproduction:\u003c\/strong\u003e Separates high-frequency duties from the main cone for clearer detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon-Graphite IMPP Cone:\u003c\/strong\u003e Reinforced cone construction supports rigidity in a small driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Hard-Dome Tweeter:\u003c\/strong\u003e Provides controlled, smooth high-frequency output from the center-mounted tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with conventional car-radio and compatible amplifier speaker outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom-Fit Basket:\u003c\/strong\u003e Designed for select GM, Ford, and Volkswagen speaker locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-A878 uses a carbon- and graphite-reinforced IMPP woofer cone with a 26 mm polyetherimide hard-dome tweeter. Its compact coaxial construction places both drivers in a single round speaker chassis, and the black finish integrates discreetly into many factory locations. The speaker pair is supplied without grilles.\u003c\/p\u003e\u003cp\u003eVerify the 3-inch cutout requirement and 1-3\/8-inch mounting depth before ordering, since vehicle fitment guides are reference tools rather than guarantees. Use the included mounting hardware and speaker connection cables as applicable, maintain correct positive and negative polarity, and use the included in-line filters. These speakers are appropriate for direct replacement on a compatible head unit or for use on a conservatively power-matched amplified channel.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809479254207,"sku":"TS-A878","price":35.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61jSAo3B3CL.jpg?v=1783109992"},{"product_id":"pioneer-ts-f1034r","title":"Pioneer TS-F1034R 4\" 2-Way Car Speakers","description":"\u003cp\u003eThe Pioneer TS-F1034R is a compact 4-inch, 2-way car speaker designed for replacing worn factory speakers or building a straightforward vehicle-audio upgrade. Its 10 cm format is suited to locations where a larger speaker cannot be accommodated. The speaker uses a 4-ohm design for compatibility with common car-audio speaker circuits.\u003c\/p\u003e\u003cp\u003eWith 20 watts RMS power handling and 150 watts maximum music power, the TS-F1034R is intended for modest-power systems. Its 86 dB sensitivity supports use with many factory or aftermarket head units when correctly matched. The specified 45 Hz to 18 kHz frequency response covers a broad portion of the audible music range.\u003c\/p\u003e\u003cp\u003eThis is a 2-way coaxial-style speaker design, combining a woofer and tweeter arrangement in one compact assembly. A 10 cm IMPP composite-cone woofer handles the lower and midrange frequencies. A 30 mm silver PET film dome tweeter is incorporated to reproduce higher-frequency detail.\u003c\/p\u003e\u003cp\u003ePioneer specifies an IMPP, or injection-molded polypropylene, composite cone for the woofer. This material is selected for a balance of low weight and rigidity in a car-speaker application. The TS-F1034R also uses a copper voice coil and a single blended-fabric damper.\u003c\/p\u003e\u003cp\u003eA shallow basket helps the TS-F1034R fit in space-limited factory speaker locations. Its 43 mm mounting depth and 102 mm cutout requirement provide useful starting points for fitment planning. Confirm the vehicle's available depth, mounting pattern, and connector arrangement before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 cm \/ 4-inch Size:\u003c\/strong\u003e Fits many compact factory-speaker locations where space is limited.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Speaker Design:\u003c\/strong\u003e Combines woofer and tweeter functions in one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIMPP Composite Cone:\u003c\/strong\u003e Uses injection-molded polypropylene composite material for the woofer cone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30 mm PET Dome Tweeter:\u003c\/strong\u003e Adds dedicated high-frequency reproduction within the two-way design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 W RMS Handling:\u003c\/strong\u003e Matches modest-power factory and aftermarket audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow 43 mm Depth:\u003c\/strong\u003e Helps accommodate installations with limited mounting clearance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-F1034R uses a round, shallow-basket speaker design with a 10 cm IMPP composite-cone woofer. Its integrated 30 mm silver PET film dome tweeter, copper voice coil, and single blended-fabric damper are part of the speaker's two-way construction. The 4-ohm voice-coil configuration is appropriate for typical automotive speaker wiring.\u003c\/p\u003e\u003cp\u003ePlan for a 102 mm cutout diameter and 43 mm mounting depth, then verify those measurements against the vehicle before purchasing or drilling. Check that the factory opening, mounting holes, door-panel clearance, and wiring connector are compatible; vehicle-specific adapters may be needed depending on the application. Use correct polarity and secure mounting hardware to help avoid vibration and inconsistent output.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809479319743,"sku":"TS-F1034R","price":18.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/57_a287d01c-70ab-43df-b35f-cf9857f0084d.jpg?v=1783109995"},{"product_id":"pioneer-ts-a6971f","title":"Pioneer TS-A6971F 6x9\" 4-Way Coaxial Speakers","description":"\u003cp\u003eThe Pioneer TS-A6971F is a pair of 6 x 9-inch A-Series Plus coaxial car speakers designed to replace compatible factory speakers. Its four-way layout combines a woofer, midrange, tweeter, and super tweeter in each speaker assembly. This makes it a practical option for drivers seeking a more complete frequency range from a direct speaker upgrade.\u003c\/p\u003e\u003cp\u003eThese speakers are rated for 100 watts RMS and 600 watts maximum power handling per pair. With 92 dB sensitivity, they are designed to produce useful output from many factory radios while also accommodating an appropriately matched external amplifier. The 4-ohm nominal impedance is common for automotive speaker systems.\u003c\/p\u003e\u003cp\u003eThe TS-A6971F uses a carbon- and mica-reinforced IMPP woofer cone for its 6 x 9-inch low-frequency driver. A 57 mm PEI cone midrange handles a dedicated portion of the vocal and instrument range. An 18 mm PET hard-dome tweeter and 11 mm PET hard-dome super tweeter extend high-frequency reproduction.\u003c\/p\u003e\u003cp\u003ePioneer specifies a 29 Hz to 33 kHz frequency response and its Open \u0026amp; Smooth sound concept for this A-Series model. The speaker design is intended to support a broad, balanced presentation across bass, midrange, and treble regions. It is suited to everyday music listening in compatible door, rear-deck, or other factory 6 x 9-inch locations.\u003c\/p\u003e\u003cp\u003eMulti-Fit installation adapters are included to broaden mounting flexibility in applicable vehicles. The speakers also include grilles, although vehicle-specific fitment should be verified before installation. For a complete upgrade, confirm available mounting depth, cutout dimensions, factory wiring connections, and the power capability of the radio or amplifier being used.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Way Coaxial System:\u003c\/strong\u003e Integrates four driver elements to cover bass, midrange, and treble frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W RMS Handling:\u003c\/strong\u003e Supports amplifier matching based on continuous power capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600W Maximum Power:\u003c\/strong\u003e Provides a stated maximum music-power handling specification for the pair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon\/Mica IMPP Woofer:\u003c\/strong\u003e Uses a reinforced polypropylene cone for the 6 x 9-inch woofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated High-Frequency Drivers:\u003c\/strong\u003e Includes separate PET dome tweeter and super tweeter elements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Fit Adapters Included:\u003c\/strong\u003e Helps adapt mounting for compatible vehicle speaker locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-A6971F is built around a 6 x 9-inch carbon- and mica-reinforced injection-molded polypropylene woofer cone, supported by a ferrite magnet. Its coaxial structure places the 57 mm PEI midrange, 18 mm PET tweeter, and 11 mm PET super tweeter within the same speaker assembly. This arrangement keeps the multi-driver system contained in a conventional 6 x 9-inch speaker format.\u003c\/p\u003e\u003cp\u003eBefore purchase, compare the vehicle opening with the 153 x 222 mm cutout requirement and confirm mounting depth clearance. Use the included Multi-Fit adapters only where they suit the vehicle's mounting pattern, and follow the vehicle and source-unit wiring guidance for polarity and secure connections. Grilles are included for installations where the speakers will be exposed rather than retained behind factory panels.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45823010996415,"sku":"TS-A6971F","price":69.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81yl_fdfmrL.jpg?v=1783376106"}],"url":"https:\/\/nsidistributor.com\/collections\/pioneer.oembed?page=2","provider":"NSI Audio Distributing","version":"1.0","type":"link"}