{"title":"New Arrivals","description":null,"products":[{"product_id":"memphis-mjp1222","title":"Memphis MJP1222 12\" Dual 2-Ohm MOJO Pro Subwoofer","description":"\u003cp\u003eThe Memphis MJP1222 is a 12-inch MOJO Pro car subwoofer with dual 2-ohm voice coils. It is intended for systems that need substantial low-frequency output while retaining practical enclosure options. With a 750-watt RMS rating, it is suited to a properly matched external subwoofer amplifier.\u003c\/p\u003e\u003cp\u003eThis model is designed for listeners building an SPL-focused bass system in a car or truck. Its rigid paper cone, foam surround, and progressive spider support controlled cone movement under demanding use. The result is a purpose-built woofer for bass-heavy music and high-output system upgrades.\u003c\/p\u003e\u003cp\u003eMemphis equips the MJP1222 with DVVC Direct Vent Voice Coil Cooling and cross-drilled front-plate venting. These features are designed to help manage voice-coil heat during operation. An aluminum shorting ring is also used to reduce inductance.\u003c\/p\u003e\u003cp\u003eThe dual 2-ohm voice-coil configuration gives installers wiring flexibility. The coils can be wired for either a 1-ohm parallel load or a 4-ohm series load, provided the amplifier is compatible with the selected final impedance. This makes the subwoofer adaptable to a range of mono amplifier setups.\u003c\/p\u003e\u003cp\u003eFor enclosure planning, Memphis specifies 1.5 cubic feet gross for one sealed subwoofer or 2.5 cubic feet gross for one vented subwoofer. The 6.23-inch mounting depth and 11.34-inch cutout diameter should be checked against the enclosure before installation. It is a component subwoofer, so an enclosure, amplifier, wiring, and installation hardware are needed separately.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Supports 1-ohm parallel or 4-ohm series wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e750 Watts RMS:\u003c\/strong\u003e Handles continuous power in a properly matched system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVVC Cooling:\u003c\/strong\u003e Direct vent voice-coil cooling helps manage operating heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Shorting Ring:\u003c\/strong\u003e Reduces inductance as specified by Memphis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid Paper Cone:\u003c\/strong\u003e Provides a durable cone structure for bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiecast Basket:\u003c\/strong\u003e Creates a rigid foundation for the moving assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJP1222 uses a rigid paper cone, double-stitched foam surround, progressive spider, diecast basket, and single-sided compression terminals. Its 2.5-inch voice coil works with a 120-ounce magnet assembly. Cross-drilled front-plate venting and DVVC cooling are integrated into the subwoofer design.\u003c\/p\u003e\u003cp\u003eUse an enclosure that meets the published gross-volume recommendations and confirm the 11.34-inch cutout and 6.23-inch mounting-depth requirements before cutting. Match the amplifier to the 750-watt RMS rating and wire the dual 2-ohm coils only to an amplifier rated for the final 1-ohm or 4-ohm load. A suitable enclosure, amplifier, power wiring, speaker wire, and mounting hardware are required for a complete installation.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843352486079,"sku":"MJP1222","price":131.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71IzotZT3eL.jpg?v=1783901591"},{"product_id":"memphis-mjp1244","title":"Memphis MJP1244 12\" Dual 4-Ohm MOJO Pro Subwoofer","description":"\u003cp\u003eThe Memphis MJP1244 is a 12-inch MOJO Pro car subwoofer designed for systems that need substantial low-frequency output from a conventional enclosure format. Its dual 4-ohm voice coil configuration gives installers wiring flexibility while supporting a single-subwoofer bass upgrade. With 750 watts RMS power handling, it is intended for use with a properly matched external amplifier.\u003c\/p\u003e\u003cp\u003eThis subwoofer is aimed at listeners building an SPL-oriented car audio system who want strong, forceful bass without moving to an unusually large or specialized enclosure. The rigid paper cone, double-stitched foam surround, and progressive spider are designed to support controlled cone movement. Its 85.68 dB sensitivity and 36.7 Hz resonant frequency provide a foundation for enclosure-based bass tuning.\u003c\/p\u003e\u003cp\u003eMemphis uses DVVC Direct Vent Voice Coil Cooling and cross-drilled front-plate venting to help manage heat around the 2.5-inch voice coil. An aluminum shorting ring is used to reduce inductance. These engineering details support stable operation when the subwoofer is used within its rated power range.\u003c\/p\u003e\u003cp\u003eThe MJP1244 uses dual 4-ohm voice coils that can be wired to a 2-ohm parallel load or an 8-ohm series load. This makes it suitable for pairing with mono amplifiers that are stable at the selected final impedance. Confirm the amplifier's rated output at the chosen load before wiring the subwoofer.\u003c\/p\u003e\u003cp\u003eFor enclosure planning, Memphis recommends a 1.5 cubic-foot sealed box or a 2.5 cubic-foot vented box for one MJP1244. The vented recommendation uses a 5 by 5 inch port measuring 27 inches long and is tuned to 36 Hz. Its 6.23-inch mounting depth and 11.34-inch cutout diameter should be checked against the enclosure before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils\u003c\/strong\u003e Enables 2-ohm parallel or 8-ohm series wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e750W RMS Handling\u003c\/strong\u003e Supports properly matched high-power mono amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVVC Cooling\u003c\/strong\u003e Direct venting helps manage voice-coil heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5-Inch Voice Coil\u003c\/strong\u003e Provides a substantial thermal and mechanical platform.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid Paper Cone\u003c\/strong\u003e Supports responsive bass output and cone stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiecast Basket\u003c\/strong\u003e Provides a rigid mounting structure for the motor.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJP1244 combines a rigid paper cone, double-stitched foam surround, progressive spider, diecast basket, aluminum shorting ring, and single-sided compression terminals. Its 120-ounce magnet and 2.5-inch voice coil are paired with cross-drilled front-plate venting and DVVC cooling. The design is intended for high-SPL car audio applications while retaining compatibility with traditional subwoofer enclosures.\u003c\/p\u003e\u003cp\u003eInstall the subwoofer in a strong, sealed enclosure with at least 6.23 inches of mounting-depth clearance and an 11.34-inch cutout. Wire both 4-ohm voice coils correctly for either a 2-ohm parallel or 8-ohm series final load, then select an amplifier that is rated appropriately at that impedance. For a single-subwoofer system, use Memphis's recommended 1.5 cubic-foot sealed or 2.5 cubic-foot vented enclosure volume as the starting point.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843352518847,"sku":"MJP1244","price":131.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71dVc1Ecy7L.jpg?v=1783901594"},{"product_id":"memphis-mjpt25","title":"Memphis MJPT25 1\" MOJO Pro Bullet Tweeters","description":"\u003cp\u003eThe Memphis MJPT25 is a pair of 1-inch MOJO Pro bullet tweeters designed to add dedicated high-frequency output to a vehicle audio system. They are suited to systems that need more vocal presence, cymbal detail, and upper-frequency projection than factory speakers can provide. With a 4-ohm load and high 105 dB sensitivity, these tweeters are intended for high-output aftermarket applications.\u003c\/p\u003e\u003cp\u003eEach MJPT25 tweeter is rated for 100 watts RMS and 200 watts peak power handling. This power capability makes the pair appropriate for use with a properly matched external amplifier or a high-powered multi-channel system. Their 1,500-20,000 Hz frequency response focuses performance on the upper midrange and treble range.\u003c\/p\u003e\u003cp\u003eThe tweeters use aluminum dome diaphragms and a neodymium magnet motor structure. A billet phase plug is incorporated into the bullet-style design. This construction supports a compact high-efficiency format for installations where strong high-frequency output is a priority.\u003c\/p\u003e\u003cp\u003eThe MJPT25 uses a rear-mount threaded body design that allows the mounting surface to be secured between the threaded trim ring and mounting collar. Its compact 1-inch, 25 mm driver size works well in custom panels, doors, dash locations, motorcycle fairings, and other suitable speaker pods. A 1.69-inch mounting cutout is specified for installation.\u003c\/p\u003e\u003cp\u003eFor system integration, the included capacitors provide a basic first-order high-pass filter when another crossover is not being used. This helps protect the tweeters from low-frequency content that they are not designed to reproduce. Pair the MJPT25 with compatible midrange speakers, an appropriate crossover strategy, and amplifier power matched to its RMS rating.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Aluminum Dome:\u003c\/strong\u003e Provides dedicated high-frequency reproduction in a compact format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W RMS Rating:\u003c\/strong\u003e Supports use in properly matched amplified systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e105 dB Sensitivity:\u003c\/strong\u003e Delivers strong output with efficient power use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Fits many aftermarket amplifier and crossover configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBillet Phase Plug:\u003c\/strong\u003e Forms part of the durable bullet-tweeter design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreaded Rear Mount:\u003c\/strong\u003e Simplifies secure mounting through a prepared panel.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJPT25 combines an aluminum dome, billet phase plug, neodymium magnet, and gold-plated compression terminals in a compact bullet-tweeter assembly. Its threaded body, trim ring, and mounting collar are designed to secure the tweeter from the rear of the mounting surface. Grilles are not included.\u003c\/p\u003e\u003cp\u003ePlan for a 1.69-inch cutout and approximately 1.5 inches of mounting depth, while confirming clearance behind the mounting panel before drilling. Connect speaker wiring to the compression terminals, observing polarity, and use the included inline capacitor on the positive lead if no other suitable high-pass crossover is installed. The terminals accept up to 16-gauge speaker wire.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843352551615,"sku":"MJPT25","price":89.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81kUsCMVeyL.jpg?v=1783901597"},{"product_id":"memphis-mjp6","title":"MEMPHIS MJP6 6.5\" MOJO Pro Midrange Speaker","description":"\u003cp\u003eThe MEMPHIS MJP6 is a single 6.5-inch MOJO Pro midrange speaker designed for high-output car audio, motorcycle, and powersports systems. It gives an upgrade path for systems that need stronger, more efficient midrange output than typical factory speakers provide. Its 4-ohm design makes it suitable for use with compatible aftermarket amplification.\u003c\/p\u003e\u003cp\u003eThis speaker is intended for listeners building systems around powerful bass while maintaining clear, forward midrange presence. With 125 watts RMS power handling and 100 dB sensitivity, it is built to produce substantial output from an appropriately matched amplifier. It can be used as a dedicated midrange driver or in compact installations where a versatile woofer-style driver is needed.\u003c\/p\u003e\u003cp\u003eThe MJP6 uses a rigid paper cone and accordion-style cloth surround to support controlled cone movement at higher output levels. Its aluminum dust cap helps protect the center of the driver, while the water-resistant construction expands its use beyond conventional in-car locations. The published frequency range is 95 Hz to 12,000 Hz, so it is best considered a focused midrange or midbass-style driver rather than a full-range speaker.\u003c\/p\u003e\u003cp\u003eA neodymium magnet assembly helps keep the MJP6 compact while supporting its high-efficiency design. The speaker uses spring-post terminals that accept up to 12-gauge speaker wire for straightforward amplifier connections. A mesh grille is included to help protect the driver in exposed mounting locations.\u003c\/p\u003e\u003cp\u003eThe MJP6 is sold individually, allowing system builders to purchase the quantity needed for doors, kick panels, fairings, side-by-sides, or custom panels. No crossover is included, so crossover selection and tuning should match the rest of the system. Pair it with appropriate high-frequency drivers, low-frequency reinforcement, and an amplifier stable at 4 ohms for a balanced multi-speaker installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e125W RMS Handling:\u003c\/strong\u003e Supports use with a properly matched aftermarket amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 dB Sensitivity:\u003c\/strong\u003e Helps deliver strong output from available amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible 4-ohm amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccordion Cloth Surround:\u003c\/strong\u003e Supports cone movement during higher-output playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Resistant Construction:\u003c\/strong\u003e Suits vehicle and powersports installation environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Mesh Grille:\u003c\/strong\u003e Adds driver protection in exposed mounting positions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJP6 combines a rigid paper cone, aluminum dust cap, accordion cloth surround, and neodymium magnet structure. Its water-resistant construction and supplied mesh grille make it practical for installations where the speaker may be more exposed than a typical enclosed door location. The speaker is supplied as one individual driver.\u003c\/p\u003e\u003cp\u003eConfirm available mounting clearance before installation: the required cutout is approximately 5.6 inches and mounting depth is approximately 2.75 inches. Connect the spring-post terminals with speaker wire up to 12 gauge, observe polarity, and use external crossover settings appropriate to the system because no crossover is included. For best integration, use it with amplification that supports a 4-ohm load and power levels appropriate for its 125-watt RMS rating.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843352584383,"sku":"MJP6","price":65.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81VlARSE7YL.jpg?v=1783901600"},{"product_id":"memphis-mjp8","title":"Memphis MJP8 8\" MOJO Pro Water-Resistant Midrange Speaker","description":"\u003cp\u003eThe Memphis MJP8 is an 8-inch high-efficiency MOJO Pro midrange speaker designed for high-output automotive and powersports audio systems. It is sold individually and is intended to reproduce the midrange frequencies that give vocals, guitars, horns, and percussion their presence in a larger sound system. Its 4-ohm design makes it suitable for use with a compatible external amplifier.\u003c\/p\u003e\u003cp\u003eWith 200 watts RMS power handling and 102 dB sensitivity, the MJP8 is built for systems that need substantial acoustic output without requiring excessive amplifier power. It is a practical choice for custom door panels, motorcycle fairings, side-by-side enclosures, and other installations where space and output both matter. The speaker is designed as a dedicated midrange\/woofer rather than a full-range replacement speaker.\u003c\/p\u003e\u003cp\u003eThe MOJO Pro design uses a neodymium magnet motor to reduce motor size and weight while supporting efficient performance. A rigid paper cone and pleated accordion-style cloth surround are used to support controlled movement and durability. The billet aluminum phase plug helps support upper-midrange dispersion, making the speaker easier to integrate with separate tweeters.\u003c\/p\u003e\u003cp\u003eMemphis gives the MJP8 a water-resistant design for applications exposed to changing weather and outdoor conditions. That makes it appropriate for compatible motorcycle and powersports installations as well as conventional car-audio builds. A mesh grille is included to help protect the driver in exposed mounting locations.\u003c\/p\u003e\u003cp\u003eFor a complete system, pair the MJP8 with an amplifier matched to its 200-watt RMS rating at 4 ohms, appropriate high-pass filtering, and separate tweeters for upper-frequency reproduction. Its 92 Hz to 10,000 Hz frequency response supports its role as a high-output midrange driver. Installers should confirm available mounting depth and cutout clearance before fitting it into a vehicle panel or enclosure.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Midrange Driver\u003c\/strong\u003e Delivers focused midrange output for high-output systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200-Watt RMS Handling\u003c\/strong\u003e Supports use with a properly matched external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e102 dB Sensitivity\u003c\/strong\u003e Produces strong output from available amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Magnet Motor\u003c\/strong\u003e Provides efficient performance in a compact motor design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Resistant Construction\u003c\/strong\u003e Suits compatible motorcycle and powersports applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMesh Grille Included\u003c\/strong\u003e Adds driver protection for exposed speaker installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJP8 combines a rigid paper cone, pleated cloth surround, billet aluminum phase plug, neodymium magnet motor, and cast aluminum basket. These components support the speaker's high-efficiency pro-audio-oriented design. Its included mesh grille provides added physical protection when the driver is installed in an exposed location.\u003c\/p\u003e\u003cp\u003eMount the speaker in a rigid panel or enclosure with sufficient clearance for its 3.23-inch mounting depth and approximately 7.125-inch cutout. Use a compatible 4-ohm amplifier and set crossover points appropriately for a dedicated midrange driver; separate tweeters and bass speakers may be needed for full-system frequency coverage. The MJP8 is sold individually, so order the quantity required for the intended installation.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843352617151,"sku":"MJP8","price":91.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/91fLtKdcQ6L.jpg?v=1783901603"},{"product_id":"memphis-mjp6c","title":"Memphis MJP6C 6.5\" MOJO Pro Component Speaker System","description":"\u003cp\u003eThe Memphis MJP6C is a 6.5-inch, two-way component speaker system designed for high-output vehicle audio upgrades. It separates midrange and high-frequency reproduction into dedicated woofers and tweeters, with passive crossovers to direct the appropriate frequencies to each driver. This makes it a practical choice for listeners replacing basic full-range speakers with a more focused component layout.\u003c\/p\u003e\u003cp\u003eThe set includes two MJP6 midrange woofers, two MJPT25 bullet tweeters, and two passive crossover networks. Its 4-ohm design is intended for use with compatible aftermarket amplification or a suitable speaker channel. Mesh woofer grilles are also included for installations where the woofers need added physical protection.\u003c\/p\u003e\u003cp\u003eEach MJP6 woofer uses a die-cast aluminum basket, neodymium magnet, accordion-style cloth surround, and billet phase plug. The combination is intended to support efficient midrange output while keeping the driver assembly compact. The MJPT25 tweeters use 25mm aluminum bullet-dome diaphragms for dedicated high-frequency reproduction.\u003c\/p\u003e\u003cp\u003eMemphis lists the MJP6C with treated water-resistant construction, expanding its potential use beyond conventional car-door installations. It can be considered for motorcycle fairings, side-by-sides, Jeeps, and other vehicle applications where exposure to the elements may be a concern. Proper enclosure, mounting location, and wiring protection remain important for long-term installation reliability.\u003c\/p\u003e\u003cp\u003eThe MJP6C fits well in a system built around an external amplifier and subwoofer, where the front-stage speakers can concentrate on mids and highs. Its included passive crossovers simplify the connection between each woofer, tweeter, and amplifier channel. Before purchase, confirm available mounting depth, cutout size, tweeter location, and vehicle-specific installation hardware requirements.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Component Set:\u003c\/strong\u003e Includes two woofers, two tweeters, and two crossovers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch MJP6 Woofers:\u003c\/strong\u003e Dedicated midrange drivers for component-system installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25mm Bullet Tweeters:\u003c\/strong\u003e Separate aluminum tweeters reproduce upper-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Crossovers:\u003c\/strong\u003e Directs appropriate frequencies to each speaker driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Magnets:\u003c\/strong\u003e Provide strong motor performance in a compact format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMesh Woofer Grilles:\u003c\/strong\u003e Add protection for exposed woofer installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJP6C woofers use die-cast aluminum baskets, neodymium magnets, cloth surrounds, and billet phase plugs. The system also uses aluminum bullet-dome tweeters and treated water-resistant construction. These materials support a durable, purpose-built component-speaker design for vehicle audio applications.\u003c\/p\u003e\u003cp\u003eMount each woofer in a location that accommodates its 2.75-inch top-mount depth and approximately 5.625-inch cutout requirement. Connect each woofer and tweeter through its supplied passive crossover rather than wiring the tweeter directly to a full-range amplifier output. Verify polarity, secure all crossover connections, and use vehicle-specific mounting adapters or wiring harnesses when required.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843352715455,"sku":"MJP6C","price":194.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/913yB3KKDWL.jpg?v=1783901607"},{"product_id":"memphis-mxa602slb","title":"Memphis MXA602SLB 6.5\" Marine LED Speakers","description":"\u003cp\u003eThe Memphis MXA602SLB is a pair of 6.5-inch marine-grade coaxial speakers designed for boats, side-by-sides, and other exposed vehicle applications. It provides a practical replacement path for factory speakers where moisture, sunlight, and outdoor conditions are part of regular use. The speakers combine a compact 6.5-inch format with a fixed black grille and integrated blue LED accent lighting.\u003c\/p\u003e\u003cp\u003eWith a published 40-watt RMS and 80-watt peak power rating, the MXA602SLB is intended for moderate-power marine and powersports audio systems. Its 85 dB sensitivity supports use with an appropriately matched source unit or amplifier. The 4-ohm design is a common fit for mobile-audio speaker channels.\u003c\/p\u003e\u003cp\u003eMemphis specifies a UV-resistant finish along with water and element resistance for this model. These details help make it suitable for installations exposed to sun, spray, dust, and changing weather conditions. The permanent grille protects the speaker face while maintaining a finished black appearance.\u003c\/p\u003e\u003cp\u003eAn injection-molded poly cone forms the core of the speaker design. This material choice is suited to an application where durability and environmental resistance are important considerations. The coaxial, 2-way configuration places the sound-producing elements in one mounting location for a straightforward speaker upgrade.\u003c\/p\u003e\u003cp\u003eIntegrated blue LED lighting adds visual accent illumination behind the grille. The MXA602SLB can be used as part of a marine or powersports system with compatible amplification and source equipment. Its 5.67-inch mounting-hole requirement and 2.91-inch mounting depth should be checked against the available mounting surface before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Construction:\u003c\/strong\u003e Built for boat and powersports applications exposed to outdoor conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40W RMS Power:\u003c\/strong\u003e Supports appropriately matched moderate-power audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Blue LEDs:\u003c\/strong\u003e Adds blue accent lighting through the fixed grille.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInjection-Molded Poly Cone:\u003c\/strong\u003e Provides a durable cone design for exposed installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Finish:\u003c\/strong\u003e Helps the exterior withstand regular sun exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePermanent Black Grille:\u003c\/strong\u003e Protects the speaker face without a separate grille installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MXA602SLB uses an injection-molded poly cone, UV-resistant finish, water- and element-resistant construction, and a permanent protective black grille. Its integrated blue LED illumination is built into the speaker\/grille assembly. Memphis rates the magnet at 10 ounces and specifies a 2.91-inch mounting depth.\u003c\/p\u003e\u003cp\u003eConfirm that the installation location accepts a 5.67-inch mounting hole, 6.69-inch screw-hole pitch, and 2.91 inches of rear clearance. Match the speakers to a 4-ohm source or amplifier channel that is suitable for their published 40-watt RMS rating. Plan wiring for both the audio connection and the integrated LED lighting, and follow the supplied documentation for final installation details.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843352748223,"sku":"MXA602SLB","price":53.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81OP8ua1l2L.jpg?v=1783901611"},{"product_id":"memphis-mxa602slw","title":"Memphis MXA602SLW 6.5\" Marine Coaxial Speakers","description":"\u003cp\u003eThe Memphis MXA602SLW is a pair of 6.5-inch marine-grade coaxial speakers designed for boats, side-by-sides, and other vehicles exposed to outdoor conditions. It provides a direct speaker-upgrade option where weather resistance and compact mounting depth are important. The white grille design suits installations that need a light-colored finish.\u003c\/p\u003e\u003cp\u003eEach speaker is rated for 40 watts RMS and 80 watts peak power at 4 ohms. The pair is intended for systems using conventional full-range speaker outputs or appropriately matched amplification. Its 85 dB sensitivity specification helps shoppers compare it with other marine and powersports speaker options.\u003c\/p\u003e\u003cp\u003eThe coaxial layout combines a polypropylene woofer cone with a PEI dome tweeter in one speaker assembly. A rubber surround supports the woofer, while the tweeter uses a neodymium magnet. This construction gives the system dedicated high-frequency reproduction without requiring a separate tweeter mounting location.\u003c\/p\u003e\u003cp\u003eMXA602SLW speakers use a UV-resistant finish and are specified as water- and element-resistant. Their permanent white protective grilles help shield the speaker assemblies in exposed installations. Integrated blue LED illumination adds an accent-lighting element behind the grilles.\u003c\/p\u003e\u003cp\u003eFor an upgrade path, this pair can replace compatible 6.5-inch speaker locations in marine, powersports, and outdoor vehicle applications. Confirm the mounting cutout, mounting depth, and screw-hole pattern before purchase. The speakers are supplied as a pair with white grilles.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Construction:\u003c\/strong\u003e UV, water, and element resistance support exposed installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue LED Illumination:\u003c\/strong\u003e Integrated lighting adds a blue grille accent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Injection-molded cone provides a durable diaphragm material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Dedicated 1-inch tweeter handles high-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePermanent White Grille:\u003c\/strong\u003e Protective grille is included with each speaker.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MXA602SLW uses an injection-molded polypropylene cone, rubber surround, PEI dome tweeter, and a white protective grille. Its UV-resistant finish and water- and element-resistant construction are intended for marine and powersports environments. The 10-ounce magnet and integrated blue LED lighting are part of the speaker assembly.\u003c\/p\u003e\u003cp\u003eVerify that the mounting location provides at least 2.91 inches of depth and accepts the 5.67-inch mounting cutout before installation. The speaker uses a 4-ohm load and is rated for up to 40 watts RMS per speaker, so match it with compatible source-unit or amplifier channels. Check the 6.69-inch screw-hole pitch and plan the LED connections as part of the installation.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843352780991,"sku":"MXA602SLW","price":53.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71ab-7ewcHL.jpg?v=1783901613"},{"product_id":"memphis-prx10","title":"Memphis PRX10 1\" PEI Dome Car Tweeters with Crossovers","description":"\u003cp\u003eThe Memphis PRX10 is a pair of 1-inch car audio dome tweeters designed to add high-frequency detail to a factory or aftermarket sound system. They are intended for vehicles where existing speakers lack clarity in vocals, cymbals, and other upper-frequency information. With a compact format and multiple mounting options, they can be used in many dash, door, sail-panel, or custom-install locations.\u003c\/p\u003e\u003cp\u003eThese tweeters use PEI dome diaphragms and are rated for 50 watts RMS and 100 watts peak power. Their 4-ohm impedance supports integration with many common car audio amplifiers and speaker systems. The 3,200-20,000 Hz frequency response focuses performance on the upper range where tweeters are most effective.\u003c\/p\u003e\u003cp\u003eA multi-direction pivot tweeter system allows the listening angle to be adjusted after installation. This can help direct high frequencies toward the listening area instead of firing away from occupants. The result is a more deliberate installation approach when replacing factory tweeters or building a component-style system.\u003c\/p\u003e\u003cp\u003eThe PRX10 package includes separate external crossovers to route appropriate frequencies to the tweeters. This helps protect the tweeters from lower-frequency content that they are not designed to reproduce. The included quick-slide wire connections and mounting hardware support a cleaner installation process.\u003c\/p\u003e\u003cp\u003eThese Memphis Power Reference tweeters are suited to listeners upgrading dull or damaged factory high-frequency drivers, as well as installers adding dedicated tweeters to a compatible speaker system. Flush-mount and angled surface-mount hardware allow placement choices based on the vehicle and desired aiming position. They can be paired with compatible full-range speakers and an appropriately configured amplifier or factory system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch PEI Dome:\u003c\/strong\u003e Produces dedicated high-frequency output in a compact format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS Handling:\u003c\/strong\u003e Supports systems with up to 50 watts RMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Integrates with many car audio speaker circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Crossovers:\u003c\/strong\u003e Direct appropriate frequencies to the tweeters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePivoting Tweeter Design:\u003c\/strong\u003e Allows aiming toward the listening area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Mounting Options:\u003c\/strong\u003e Includes flush and angled surface-mount hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX10 uses a 1-inch PEI dome tweeter design with a compact 0.75-inch listed mounting depth and a 0.75-ounce magnet. Its pivoting assembly is designed to make aiming more flexible than a fixed-position tweeter. The package includes flush-mount housings, retaining rings, and angled surface-mount housings for different installation approaches.\u003c\/p\u003e\u003cp\u003eFor installation, mount the tweeters high in the vehicle when practical and aim them toward the listeners for more direct high-frequency delivery. Connect each tweeter through its included crossover rather than wiring it directly to a full-range output. Confirm available mounting depth, cutout space, wiring polarity, and system power before installation; factory locations may require vehicle-specific adaptation.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843352846527,"sku":"PRX10","price":44.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71UFtq4ewTL.jpg?v=1783901619"},{"product_id":"memphis-prx27","title":"Memphis PRX27 2.75\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Memphis PRX27 is a pair of compact 2.75-inch car speakers designed for replacing small factory speakers in compatible dash or other OEM locations. Their compact format addresses vehicles that use uncommon small speaker openings where larger aftermarket speakers will not fit. They are intended for car, truck, SUV, and van applications.\u003c\/p\u003e\u003cp\u003eEach PRX27 speaker is rated for 15 watts RMS and 30 watts peak power at 4 ohms. With an 85 dB sensitivity rating and a 221-12,000 Hz frequency response, these speakers are suited to modest-power factory-radio or appropriately matched amplified systems. Their small drivers are focused on upper-bass, midrange, and high-frequency support rather than deep bass production.\u003c\/p\u003e\u003cp\u003eThe speakers use a paper cone and foam surround, combining low moving mass with a straightforward factory-replacement design. A PEI dome tweeter with a pivot mounting arrangement is listed for the Power Reference design. This 2-way configuration helps add detail and presence in small speaker locations.\u003c\/p\u003e\u003cp\u003eThe PRX27 belongs to Memphis Audio's Power Reference series and is sold as a pair. It can be used to replace worn or blown small OEM speakers when the vehicle's opening, mounting pattern, and available depth are compatible. Verify the factory wiring arrangement and impedance requirements before installation, especially in vehicles with factory amplification.\u003c\/p\u003e\u003cp\u003eWith a 2-5\/8-inch cutout requirement and a listed top-mount depth of 1-3\/8 inch, the PRX27 is designed for shallow small-speaker locations. Factory grilles may be reused where applicable because separate grilles are not included. Mounting hardware and wire caps are listed among the included accessories.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact 2.75-Inch Size:\u003c\/strong\u003e Fits compatible small factory speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Combines a small driver and tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-Watt RMS Rating:\u003c\/strong\u003e Matches modest-power audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaper Cone:\u003c\/strong\u003e Provides a lightweight driver diaphragm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoam Surround:\u003c\/strong\u003e Supports controlled cone movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible car audio outputs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX27 uses a black finish with a paper cone and foam surround. Memphis documentation for the Power Reference design also identifies a polyurethane surround, PEI dome tweeter, and pivot tweeter mount; confirm the physical configuration of the supplied speakers before planning a custom installation. No illumination, damping kit, or separate speaker grilles are included.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 2.75-inch speaker, a 2-5\/8-inch cutout, and the required mounting depth before ordering. The pair includes mounting screws, mounting clips, and wire caps, but no external crossovers are included. Use the existing factory grille only when clearance and fitment are appropriate, and avoid overpowering the 15-watt RMS rating per speaker.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843353206975,"sku":"PRX27","price":24.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71IYRdvS8aL.jpg?v=1783901622"},{"product_id":"memphis-prx410","title":"Memphis PRX410 4x10\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Memphis PRX410 is a pair of 4x10-inch, 2-way coaxial car speakers designed as a direct-size upgrade for many factory speaker locations. It gives drivers a practical way to replace aging OEM speakers while retaining a compact 4x10-inch footprint. With 50 watts RMS power handling per speaker, the pair is suited to factory-radio upgrades or moderate-power aftermarket systems.\u003c\/p\u003e\u003cp\u003eThese speakers combine a full-range woofer and a centrally mounted tweeter in one assembly. The graphite-reinforced polypropylene cone is designed to reproduce midrange and upper-bass information, while the PEI dome tweeter handles higher frequencies. This coaxial layout helps simplify installation where a separate component-speaker system is not needed.\u003c\/p\u003e\u003cp\u003eThe PRX410 uses a multi-direction pivot tweeter system, allowing the tweeter to be aimed toward the listening area when installation space permits. This can help tailor high-frequency direction in dash, rear-deck, or other factory 4x10-inch locations. An integrated 6 dB tweeter crossover supports proper signal routing to the tweeter.\u003c\/p\u003e\u003cp\u003eWith a 4-ohm impedance and 89 dB sensitivity, the PRX410 is compatible with many conventional car-audio speaker applications. Its 120 Hz to 20 kHz listed frequency response focuses it on clear vocal, instrument, and high-frequency reproduction. For a system that needs deeper low bass, it can be paired with a dedicated subwoofer.\u003c\/p\u003e\u003cp\u003eThe Power Reference Series design balances factory-location fitment with upgrade-oriented materials and adjustable treble dispersion. A 13-ounce magnet supports the speaker motor structure, while the butyl rubber surround is intended for durability during regular use. Included grilles provide an option for custom or exposed speaker installations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4x10-Inch Coaxial Format:\u003c\/strong\u003e Fits many factory-style 4x10-inch speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS Power Handling:\u003c\/strong\u003e Supports moderate aftermarket amplifier or radio power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Reproduces high-frequency detail in a compact assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePivoting Tweeter System:\u003c\/strong\u003e Allows directional adjustment of high-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated 6 dB Crossover:\u003c\/strong\u003e Directs high frequencies to the tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with many factory and aftermarket systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX410 uses a graphite-reinforced polypropylene cone, a butyl rubber surround, and a PEI dome tweeter. Its black Power Reference styling keeps the appearance understated when used behind factory panels or with the included grilles. The 2-way coaxial construction places the woofer and tweeter in one speaker frame.\u003c\/p\u003e\u003cp\u003eConfirm both the vehicle's factory opening and available mounting clearance before ordering. Memphis lists a 2.5-inch mounting depth; the speaker should be wired with correct polarity and powered within its 50-watt RMS rating. The pivot tweeter may be aimed toward the listening position where panel clearance allows, and a subwoofer can be added if deeper bass is desired.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843353272511,"sku":"PRX410","price":68.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/819g6CaNenL.jpg?v=1783901625"},{"product_id":"memphis-prx46","title":"Memphis PRX46 4x6\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Memphis PRX46 is a pair of 4x6-inch, 2-way coaxial car speakers designed for replacing or upgrading compatible factory speaker locations. Its compact format helps address the limited space often found in dash, door, or rear-deck 4x6-inch applications. Each speaker combines a woofer and tweeter in one assembly for straightforward full-range speaker replacement.\u003c\/p\u003e\u003cp\u003eWith 30 watts RMS and 60 watts peak handling per speaker, the PRX46 is suited to modest-power car audio systems. Its 4-ohm impedance supports use with compatible factory or aftermarket audio equipment. The 86 dB sensitivity rating and 125 Hz to 20 kHz frequency response define its published operating specifications.\u003c\/p\u003e\u003cp\u003eThe speaker uses a polypropylene woofer cone with a polyurethane surround. This material combination is intended to provide a durable moving assembly for midrange and upper-bass reproduction. A PEI dome tweeter handles higher-frequency content within the coaxial design.\u003c\/p\u003e\u003cp\u003eA multi-direction pivot tweeter system lets the installer aim the tweeter during installation. This can be useful when the speaker location is off-axis from the listening position. The integrated 6 dB tweeter crossover is designed to direct appropriate frequencies to the tweeter.\u003c\/p\u003e\u003cp\u003eThe PRX46 is part of the Memphis Audio Power Reference speaker line and can be used as a focused factory-speaker replacement or as one part of a broader vehicle audio upgrade. Its 2.125-inch mounting depth should be checked against the available depth behind the intended mounting surface. Installation hardware and short speaker leads are included, while grilles are not included.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4x6-Inch Coaxial Format:\u003c\/strong\u003e Combines woofer and tweeter in a compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30W RMS Per Speaker:\u003c\/strong\u003e Supports compatible moderate-power factory or aftermarket systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePivoting PEI Dome Tweeter:\u003c\/strong\u003e Allows high-frequency output to be aimed during installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Provides a durable cone material for full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolyurethane Surround:\u003c\/strong\u003e Supports controlled cone movement and durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated 6 dB Crossover:\u003c\/strong\u003e Routes high-frequency content to the tweeter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX46 uses a black-on-black M-Cone appearance, a polypropylene woofer cone, polyurethane surround, PEI dome tweeter, and an 11-ounce magnet. Its 2-way coaxial layout places the tweeter within the woofer assembly, reducing the need for separately mounted external tweeters. Grilles are not included.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's 4x6-inch speaker opening, mounting pattern, and available 2.125-inch mounting depth before ordering. The package includes two speakers, two 12-inch speaker leads, eight 1-inch screws, eight speed clips, and a user manual. For amplified systems, match the amplifier setup appropriately to the speakers' 4-ohm impedance and 30-watt RMS-per-speaker rating.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843353436351,"sku":"PRX46","price":50.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/715Vhu4JaIL.jpg?v=1783901628"},{"product_id":"memphis-prx6902","title":"Memphis PRX6902 6x9\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Memphis PRX6902 is a pair of 6x9-inch, 2-way coaxial car speakers from the Power Reference series. It is designed to replace compatible factory speakers with a full-range speaker solution that combines a woofer and tweeter in each location. This makes it a practical option for vehicles that use 6x9-inch speaker positions and need an audio-system refresh.\u003c\/p\u003e\u003cp\u003eEach speaker handles up to 60 watts RMS and 120 watts peak at a 4-ohm impedance. With 90 dB sensitivity and a 55 Hz to 20 kHz frequency response, the PRX6902 is suited to factory-radio upgrades as well as modest aftermarket amplification. Its 2-way configuration covers bass, midrange, and treble from a single coaxial assembly.\u003c\/p\u003e\u003cp\u003eThe woofer uses a polypropylene cone with a polyurethane surround. This material combination is intended to provide controlled cone movement while supporting regular in-vehicle use. A PEI dome tweeter handles high-frequency reproduction and is mounted within the coaxial speaker assembly.\u003c\/p\u003e\u003cp\u003eMemphis equips the PRX6902 with a pivot-mount, multi-direction tweeter system. The tweeter can be aimed to help tailor high-frequency direction for the installation location. An integrated 6 dB tweeter crossover is also specified to manage the transition to the tweeter.\u003c\/p\u003e\u003cp\u003eThese speakers fit naturally into a straightforward front- or rear-speaker replacement plan, and they can also be used as part of a larger system with a separate subwoofer for deeper bass. Verify available mounting depth, mounting-hole pattern, and vehicle-specific adapter needs before installation. The pair includes protective grilles and installation hardware for applications where those parts are needed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Handling:\u003c\/strong\u003e Supports continuous power up to 60 watts each.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Reproduces high frequencies through a dome design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePivot Tweeter System:\u003c\/strong\u003e Allows tweeter direction to be adjusted after mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides the woofer diaphragm material for full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated 6 dB Crossover:\u003c\/strong\u003e Directs high frequencies to the tweeter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX6902 uses a black Power Reference design with a polypropylene woofer cone, polyurethane surround, PEI dome tweeter, and 14-ounce magnet. Each speaker is a 4-ohm, 2-way coaxial unit with a specified 3-inch mounting depth. Protective grilles are included, and retailer package documentation identifies black steel-mesh grilles with plastic frames.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 6x9-inch speaker and has adequate depth behind the mounting surface before ordering. The package is listed with two speakers, two 12-inch speaker leads, two grilles, eight 1-3\/8-inch screws, and eight speed clips. Use vehicle-specific mounting adapters or wiring harnesses when the factory opening or connector differs from the included hardware.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843353469119,"sku":"PRX6902","price":70.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81wLgswXRPL.jpg?v=1783901631"},{"product_id":"memphis-prx6903","title":"Memphis PRX6903 6x9\" 3-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Memphis PRX6903 is a pair of 6x9-inch, 3-way coaxial car speakers designed as a direct-size audio upgrade for compatible factory speaker locations. It combines woofer, midrange, and tweeter elements into each speaker to provide full-range playback from a single mounting position. This makes it a practical option for replacing worn or limited factory 6x9 speakers.\u003c\/p\u003e\u003cp\u003eWith 60 watts RMS and 120 watts peak power handling per speaker, the PRX6903 is suited to systems that need a moderate-power full-range speaker. Its 90 dB sensitivity supports efficient operation in a variety of car-audio installations. The 4-ohm design is compatible with common aftermarket speaker outputs.\u003c\/p\u003e\u003cp\u003eThe 3-way coaxial layout is intended to bring midrange and high-frequency detail into the same location as the 6x9 woofer. A PEI dome tweeter handles the upper frequencies, while the multi-direction pivot tweeter system allows the tweeter angle to be adjusted for the installation. This can help direct high-frequency sound toward the listening area where space permits.\u003c\/p\u003e\u003cp\u003eMemphis uses a polyurethane surround and stealthy black-on-black M-Cone design for the PRX6903. The surround supports cone movement while contributing to the speaker's durable construction. Its integrated appearance suits installations where the speaker may be visible behind a grille or rear deck opening.\u003c\/p\u003e\u003cp\u003eThe PRX6903 fits into a system upgrade path for vehicles that use 6x9-inch speakers and have sufficient mounting clearance. It can be used as a replacement pair or matched with other compatible full-range speakers in a larger system. Grilles, speaker leads, mounting hardware, and a user manual are included for installation flexibility.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Size:\u003c\/strong\u003e Fits compatible 6x9-inch factory or custom speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Combines woofer, midrange, and tweeter elements in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Handling:\u003c\/strong\u003e Supports 60 watts RMS and 120 watts peak per speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Provides high-frequency reproduction within the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePivoting Tweeter System:\u003c\/strong\u003e Allows tweeter direction to be adjusted during installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Grilles:\u003c\/strong\u003e Adds protection and installation flexibility where speakers are exposed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX6903 uses a polyurethane surround, PEI dome tweeter, and black-on-black M-Cone design. Each speaker has a 14-ounce magnet and a 3-inch mounting depth. The pair is supplied with two grilles for installations that require visible speaker protection.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 6x9-inch speaker and provides at least 3 inches of mounting depth before installation. Match the speakers to a compatible 4-ohm source or amplifier and avoid exceeding their 60-watt RMS rating per speaker. The package includes two 12-inch speaker leads, eight screws, eight speed clips, and a user manual; vehicle-specific mounting adapters or wiring interfaces may still be needed depending on the vehicle.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843353501887,"sku":"PRX6903","price":74.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81BQIsBDF9L.jpg?v=1783901634"},{"product_id":"memphis-prx602","title":"Memphis PRX602 6.5\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Memphis PRX602 is a pair of 6.5-inch, 2-way coaxial car speakers designed as a straightforward replacement or upgrade for many factory speaker locations. They combine a woofer and tweeter in each speaker, allowing installation without separate external crossover networks. This makes them suitable for drivers replacing worn factory speakers or building an entry-level aftermarket audio system.\u003c\/p\u003e\u003cp\u003eEach PRX602 speaker is rated to handle 50 watts RMS and 100 watts peak power at 4 ohms. That power range works with many factory radios while also providing a sensible match for a modest aftermarket amplifier. With 88 dB sensitivity, the speakers are intended for everyday in-car listening rather than high-power competition systems.\u003c\/p\u003e\u003cp\u003eThe coaxial design uses a graphite-reinforced polypropylene cone for the woofer and a PEI dome tweeter for high frequencies. Its pivoting tweeter can be aimed toward the listening area to help tailor high-frequency direction in installations where the speakers are mounted low in doors or off-axis. An integrated 6 dB tweeter crossover is included within the speaker assembly.\u003c\/p\u003e\u003cp\u003eMemphis specifies a butyl rubber surround and a 10-ounce magnet structure for this model. The black speaker design is intended to blend into factory-style locations, and protective grilles are included for custom or exposed installations. The specified frequency response is 100 Hz to 20 kHz.\u003c\/p\u003e\u003cp\u003eThe PRX602 can serve as front or rear full-range speakers in a compatible vehicle, provided the mounting dimensions and speaker fitment are verified first. They are sold as a pair, so two pairs may be used for vehicles with four compatible speaker locations. For amplified systems, choose an amplifier whose clean per-channel output is appropriate for the speakers' 50-watt RMS rating.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each speaker for simplified replacement installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS Handling:\u003c\/strong\u003e Supports moderate factory-radio or aftermarket-amplifier power levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePivoting PEI Tweeter:\u003c\/strong\u003e Lets the installer direct treble toward the listening position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated 6 dB Crossover:\u003c\/strong\u003e Filters the tweeter within the coaxial speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGraphite-Reinforced Polypropylene Cone:\u003c\/strong\u003e Provides the woofer cone material specified for this model.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Speaker Grilles:\u003c\/strong\u003e Adds protection for installations with exposed speaker faces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX602 uses a graphite-reinforced polypropylene woofer cone, butyl rubber surround, PEI dome tweeter, and 10-ounce magnet structure. Its black finish and coaxial layout provide a clean appearance in replacement or custom speaker locations. The tweeter is mounted centrally and uses a multi-direction pivot system.\u003c\/p\u003e\u003cp\u003eVerify vehicle-specific fitment before purchase, including the 4-7\/8-inch cutout requirement and available mounting clearance. The listed top-mount depth is 2-1\/4 inches, while the bottom-mount depth is 2-11\/16 inches. The package includes two speakers, two grilles, mounting hardware, speaker leads, and a mounting template; adapters or vehicle-specific harnesses may still be required for a factory installation.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843353534655,"sku":"PRX602","price":51.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81EByFiD29L.jpg?v=1783901637"},{"product_id":"memphis-prx824v2","title":"Memphis PRX824V2 8\" Selectable-Impedance Subwoofer","description":"\u003cp\u003eThe Memphis PRX824V2 is an 8-inch car audio subwoofer for systems that need added low-frequency output without requiring a large driver. It is suited to compact custom enclosures and factory-subwoofer replacement projects where mounting space is limited. Its 200-watt RMS power rating makes it appropriate for amplification matched to its continuous power capability.\u003c\/p\u003e\u003cp\u003eA FLEX selectable-impedance terminal lets the installer configure the woofer for either 2-ohm or 4-ohm operation. This provides flexibility when matching an amplifier or planning a later move to a multi-subwoofer system. The impedance selection is made at the subwoofer using the Memphis FLEX plug terminal.\u003c\/p\u003e\u003cp\u003eThe PRX824V2 uses a black polypropylene cone and stitched butyl-rubber surround to support controlled cone movement. A reinforced spider, woven tinsel leads, and an improved suspension and coil design are part of its construction. Its 84 dB sensitivity rating is specified at both selectable impedance settings.\u003c\/p\u003e\u003cp\u003eMemphis DVVC Direct Voice Coil Cooling technology is designed to help manage voice-coil heat during use. The subwoofer also uses a 1.5-inch high-temperature voice-coil former. These features support dependable operation when the woofer is installed and powered within its published ratings.\u003c\/p\u003e\u003cp\u003eFor enclosure planning, Memphis specifies 0.45 cubic feet sealed for one subwoofer or 0.70 cubic feet vented for one subwoofer. The compact 3.89-inch mounting depth and 6.92-inch cutout diameter can help when fitting the driver into space-conscious installations. Select the enclosure style, amplifier output, and final impedance according to the requirements of the complete audio system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFLEX Selectable Impedance:\u003c\/strong\u003e Choose 2-ohm or 4-ohm operation at the terminal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200W RMS Handling:\u003c\/strong\u003e Supports amplifier matching up to its continuous rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVVC Cooling:\u003c\/strong\u003e Helps manage heat around the voice coil.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides a durable cone for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStitched Butyl Surround:\u003c\/strong\u003e Supports controlled movement and long-term durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact 8-Inch Format:\u003c\/strong\u003e Fits installations with limited mounting depth.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX824V2 combines a black-on-black polypropylene cone with a stitched butyl-rubber surround, reinforced spider, woven tinsel leads, and a single-stacked ferrite motor structure. Its 1.5-inch high-temperature copper voice coil uses a high-temperature TIL former. The driver has a 33-ounce magnet and an 8.63-inch outside frame diameter.\u003c\/p\u003e\u003cp\u003eConfirm that the installation location accepts the 6.92-inch cutout, 8.63-inch frame diameter, and 3.89-inch mounting depth before cutting a panel or choosing an enclosure. Set the FLEX plug for the intended 2-ohm or 4-ohm load before connecting speaker wire, and use an amplifier whose stable load and RMS output are appropriate for the selected configuration. Memphis publishes sealed and vented enclosure recommendations for both single- and dual-subwoofer systems.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843353600191,"sku":"PRX824V2","price":60.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71n18LhwV5L.jpg?v=1783901641"},{"product_id":"memphis-prx60","title":"Memphis PRX60 6.5\" Oversized 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Memphis PRX60 is a pair of 6.5-inch oversized, 2-way coaxial car speakers from the Power Reference line. It is designed as a practical replacement or upgrade for compatible factory speaker locations. The coaxial layout combines a woofer and tweeter in each speaker for a compact full-range installation.\u003c\/p\u003e\u003cp\u003eThese speakers suit listeners replacing worn factory drivers or building a modest audio-system upgrade without moving to separate component speakers. Each speaker is rated for 50 watts RMS and 100 watts peak power at 4 ohms. Their 88 dB sensitivity supports use with appropriately matched factory or aftermarket amplification.\u003c\/p\u003e\u003cp\u003eThe PRX60 uses a polypropylene woofer cone with a polyurethane surround, paired with a PEI dome tweeter. This material combination is intended to provide a durable moving assembly for everyday vehicle use. The speaker’s published frequency response is 73 Hz to 20 kHz.\u003c\/p\u003e\u003cp\u003eA multi-direction pivot tweeter system allows the high-frequency driver to be aimed after installation. This can help direct upper-frequency output toward the listening area when the speakers are installed low in doors or other off-axis factory locations. An integrated 6 dB tweeter crossover is included within the coaxial design.\u003c\/p\u003e\u003cp\u003eThe oversized 6.5-inch format fits many common speaker positions, but vehicle fitment should always be checked against the mounting dimensions before purchase. The PRX60 has a 2.5-inch listed mounting depth and a 5-9\/16-inch cutout requirement. It is supplied as a pair with grilles and installation hardware for a more complete replacement-speaker package.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter functions in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS Handling:\u003c\/strong\u003e Supports properly matched factory or aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Handles high-frequency reproduction in the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePivot Tweeter System:\u003c\/strong\u003e Lets installers aim the tweeter after mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated 6 dB Crossover:\u003c\/strong\u003e Filters the tweeter within each speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOversized 6.5-Inch Fitment:\u003c\/strong\u003e Suits many compatible factory speaker locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX60 uses a graphite-reinforced polypropylene cone design, polyurethane surround, PEI dome tweeter, and 10-ounce magnet structure. Its black-on-black M-Cone appearance keeps the presentation understated behind factory grilles or when using the included grilles. The speakers are built as conventional 4-ohm coaxial replacements rather than separate woofer-and-tweeter component sets.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle’s available mounting depth, cutout diameter, and mounting-hole pattern before installation. The published top-mount depth is 2-9\/16 inches, bottom-mount depth is 2-3\/4 inches, and cutout diameter is 5-9\/16 inches. Connect each speaker with correct positive and negative polarity, use an audio source or amplifier compatible with a 4-ohm load, and set amplifier gain appropriately for the 50-watt RMS rating.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843353632959,"sku":"PRX60","price":46.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/812z0aLlUbL.jpg?v=1783901644"},{"product_id":"memphis-srx1044v","title":"Memphis SRX1044V 10\" Dual 4-Ohm Subwoofer","description":"\u003cp\u003eThe Memphis SRX1044V is a 10-inch Street Reference car subwoofer designed to add low-frequency output to an aftermarket audio system. Its dual 4-ohm voice coils provide wiring flexibility for matching a compatible mono or multi-channel amplifier. It is intended for listeners who want a compact subwoofer option with a 300-watt RMS power rating.\u003c\/p\u003e\u003cp\u003eThis subwoofer uses a polypropylene cone and rubber surround to support controlled bass reproduction in daily-driving systems. The progressive poly cotton spider helps manage cone movement during operation. Its sound character and final output will depend on enclosure design, amplifier setup, and vehicle acoustics.\u003c\/p\u003e\u003cp\u003eThe SRX1044V is optimized for use in either sealed or ported enclosures, allowing installers to select the enclosure style that suits their system goals. A sealed enclosure is commonly chosen for a more compact installation, while a ported enclosure can be selected when enclosure space and system design allow. Memphis lists both enclosure types as compatible with this model.\u003c\/p\u003e\u003cp\u003eAn anodized aluminum voice-coil former is used as part of the motor assembly to support heat handling under rated use. The subwoofer also has 12 AWG compression terminals for secure speaker-wire connections. Its stamped steel frame provides a rigid mounting platform inside a properly built enclosure.\u003c\/p\u003e\u003cp\u003eWith dual 4-ohm voice coils, the SRX1044V can be wired for a 2-ohm or 8-ohm final load when used as a single subwoofer. This makes it useful when matching an amplifier's stable impedance range or planning a multi-subwoofer system. Proper gain setting, enclosure construction, and amplifier compatibility remain important for dependable performance.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Subwoofer:\u003c\/strong\u003e Fits systems designed around a standard 10-inch bass driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Handling:\u003c\/strong\u003e Supports amplifier matching around its continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Enables 2-ohm or 8-ohm single-sub wiring configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides a durable cone material for vehicle installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed or Ported Compatibility:\u003c\/strong\u003e Supports different enclosure approaches and installation goals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 AWG Compression Terminals:\u003c\/strong\u003e Provide secure connections for appropriately sized speaker wire.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe SRX1044V combines a polypropylene cone, rubber surround, progressive poly cotton spider, anodized aluminum voice-coil former, and stamped steel frame. These materials support the subwoofer's physical durability and controlled operation in an enclosed vehicle audio installation. The dual voice-coil design gives the installer more flexibility than a single-voice-coil subwoofer when selecting a final impedance load.\u003c\/p\u003e\u003cp\u003eConfirm the enclosure has at least the required mounting clearance and a cutout sized for this subwoofer before installation. Memphis specifies a 4.48-inch mounting depth and 9.17-inch cutout diameter; use a rigid sealed or ported enclosure and securely fasten the driver. Wire both voice coils correctly, verify the resulting impedance is compatible with the amplifier, and set amplifier gain to avoid clipping.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843353665727,"sku":"SRX1044V","price":46.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81sGttpEn7L_52209b7f-dd18-4bc5-b7fd-87d649b53c9f.jpg?v=1783901647"},{"product_id":"memphis-srxe12sa","title":"Memphis SRXE12SA 12\" Powered Vented Subwoofer","description":"\u003cp\u003eThe Memphis SRXE12SA is a self-powered 12-inch bass system that combines a subwoofer, ported enclosure, and amplifier in one vehicle-ready package. It is designed for drivers who want to add low-frequency output without separately selecting a subwoofer enclosure and matching amplifier. The integrated amplifier supplies 300 watts RMS to the included SRX woofer.\u003c\/p\u003e\u003cp\u003eA front-ported enclosure gives the SRXE12SA an output-focused bass character while keeping the installation centered around one compact assembly. Its adjustable low-pass filter lets the subwoofer blend with a vehicle's full-range speakers by limiting the frequencies sent to the enclosure. A variable bass boost and selectable phase control provide additional setup flexibility.\u003c\/p\u003e\u003cp\u003eThe SRXE12SA can work with aftermarket and factory-style audio systems through its RCA and high-level input options. Its input-mode switch selects low-level RCA or high-level speaker input, while the DC\/REM switch supports DC-offset sensing through the high-level input or a conventional remote-turn-on connection. This makes it suitable for a range of source-unit configurations.\u003c\/p\u003e\u003cp\u003eIntegrated RGB illumination adds a customizable visual accent to the front of the enclosure. The onboard RGB control cycles through seven preset colors, and an external RGB port supports optional controller-based color control. A supplied bass-level remote gives the driver a convenient way to adjust subwoofer output from the listening position.\u003c\/p\u003e\u003cp\u003eThis powered enclosure is a practical upgrade path for a vehicle that needs dedicated bass while retaining its existing speakers and source unit. The built-in amplifier eliminates the need to mount a separate subwoofer amplifier, but the system still requires proper power, ground, signal, and turn-on connections. Its removable power terminal can also simplify disconnecting the enclosure when cargo space is needed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated 300W RMS Amplifier:\u003c\/strong\u003e Powers the included 12-inch SRX subwoofer without a separate external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Ported Enclosure:\u003c\/strong\u003e Uses a front vent to support strong bass output from the all-in-one enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA And High-Level Inputs:\u003c\/strong\u003e Connects to source units with line-level outputs or speaker-level outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Low-Pass Filter:\u003c\/strong\u003e Sets the subwoofer crossover point from 50Hz to 200Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB LED Illumination:\u003c\/strong\u003e Select from seven preset colors or connect an optional external RGB controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Bass-Level Remote:\u003c\/strong\u003e Lets you adjust bass output from a convenient remote control location.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe SRXE12SA uses a carpeted, embroidered enclosure with a front-ported design, integrated amplifier, and front-panel RGB lighting. Its single 12-inch woofer is installed in the enclosure, so there is no separate box-building or subwoofer-mounting step. A removable power terminal supports easier enclosure removal when access to the cargo area is required.\u003c\/p\u003e\u003cp\u003eInstall the enclosure in a secure location with adequate clearance for its dimensions and wiring connections. Connect its +12V lead directly to the vehicle battery, use an equally sized ground wire to a clean chassis-ground point, and install a circuit breaker or fuse within 18 inches of the battery. Choose either RCA or high-level input, select DC sensing or remote turn-on as appropriate for the source unit, then set gain, crossover, phase, and bass boost carefully to suit the system.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843353698495,"sku":"SRXE12SA","price":201.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61CnlUP8OSL.jpg?v=1783901649"},{"product_id":"memphis-prx1224","title":"Memphis PRX1224 12\" Selectable-Impedance Subwoofer","description":"\u003cp\u003eThe Memphis PRX1224 is a 12-inch component car subwoofer designed to add controlled low-frequency output to a custom vehicle audio system. It is intended for use with an external amplifier and a properly sized sealed or ported enclosure. Its selectable 2-ohm or 4-ohm configuration helps simplify impedance matching when planning a single-subwoofer system or a future multi-subwoofer upgrade.\u003c\/p\u003e\u003cp\u003eWith a 300-watt RMS power rating and 600-watt peak rating, the PRX1224 is suited to moderate-power bass systems where dependable daily listening is the goal. Its 30-150 Hz frequency-response rating covers the bass range commonly handled by a dedicated subwoofer. A 12-inch driver format gives installers flexibility for trunk, hatch, and larger under-seat enclosure designs where mounting depth permits.\u003c\/p\u003e\u003cp\u003eThe selectable-impedance terminal arrangement uses included jumper wires to present either a 2-ohm or 4-ohm load to the amplifier. This lets the installer adapt the subwoofer to the amplifier's supported load without changing the driver. The rated power handling remains 300 watts RMS in either impedance setting.\u003c\/p\u003e\u003cp\u003eMemphis equips the PRX1224 with DVVC Direct Voice Coil Cooling technology, a high-temperature TIL voice-coil former, and improved suspension and coil design. These elements are intended to support consistent operation under sustained bass playback. The driver also uses woven tinsel leads and a reinforced spider shoulder as part of its moving assembly.\u003c\/p\u003e\u003cp\u003eA black-on-black polypropylene cone and double-stitched butyl rubber surround give the subwoofer a purposeful, durable appearance. The PRX1224 can be used in a 1.25-cubic-foot sealed enclosure for a compact, controlled system or a 2.75-cubic-foot ported enclosure for a larger enclosure design. It is a component subwoofer, so an amplifier, enclosure, wiring, and installation hardware must be selected separately.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable 2Ω or 4Ω Load:\u003c\/strong\u003e Included jumpers let installers match the subwoofer to compatible amplifier loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Handling:\u003c\/strong\u003e Supports amplifier matching around its continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVVC Cooling:\u003c\/strong\u003e Direct Voice Coil Cooling helps manage heat during extended bass playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Inch Driver:\u003c\/strong\u003e Provides dedicated low-frequency reproduction for custom vehicle audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Black-on-black cone construction supports a clean, coordinated appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eButyl Rubber Surround:\u003c\/strong\u003e Double-stitched surround supports controlled cone movement and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX1224 combines a black polypropylene cone with a double-stitched butyl rubber surround, reinforced spider shoulder, woven tinsel leads, and a high-temperature TIL voice-coil former. Its 60-ounce magnet and 2-inch voice-coil diameter support the driver architecture. A rubber trim ring\/gasket is installed on the subwoofer, while a grille is not included.\u003c\/p\u003e\u003cp\u003ePlan for an approximately 5.5-inch top-mount depth and an 11-inch cutout. Use the included jumper wires to configure the driver for either 2 ohms or 4 ohms before connecting it to an amplifier, and confirm that the amplifier is stable at the chosen impedance. Memphis lists 1.25 cubic feet as the ideal sealed enclosure volume and 2.75 cubic feet as the ideal ported enclosure volume.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843353731263,"sku":"PRX1224","price":79.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81JNBHJAxsS.jpg?v=1783901653"},{"product_id":"memphis-prx4","title":"Memphis PRX4 4\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Memphis PRX4 is a pair of 4-inch 2-way coaxial car speakers designed to replace small factory speakers with a more capable full-range solution. It combines a woofer and tweeter in each speaker, helping simplify an upgrade where space is limited. The PRX4 is intended for vehicles that use 4-inch round speaker locations.\u003c\/p\u003e\u003cp\u003eWith 20 watts RMS and 40 watts peak power handling per speaker, the PRX4 is suited to factory-radio upgrades and modest amplified systems. Its 4-ohm impedance supports common aftermarket and factory-style speaker wiring applications. An 86 dB sensitivity rating and a stated 187 Hz to 20 kHz frequency response define its operating range.\u003c\/p\u003e\u003cp\u003eA graphite-reinforced polypropylene cone handles the midrange and upper-bass duties, while the PEI dome tweeter handles high frequencies. The result is a compact coaxial speaker format that covers the main frequency range without requiring separate component tweeters. A butyl rubber surround supports cone movement and durability.\u003c\/p\u003e\u003cp\u003eThe PRX4 uses Memphis Audio's multi-direction pivot tweeter system, allowing the tweeter angle to be adjusted toward the listening area when installation space permits. This can help tailor high-frequency direction in door, dash, or rear-deck locations. An integrated 6 dB crossover is included for the tweeter.\u003c\/p\u003e\u003cp\u003eThese speakers work well as a direct replacement starting point in a broader audio upgrade. They can be paired with a compatible low-power four-channel amplifier or used with an appropriately rated head unit. Confirm the vehicle's speaker opening, mounting depth, and connector requirements before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each compact speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20W RMS Handling:\u003c\/strong\u003e Matches modest factory-radio and amplifier power levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Reproduces high frequencies through an integrated tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePivot Tweeter System:\u003c\/strong\u003e Allows high-frequency direction to be adjusted after mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGraphite-Reinforced Cone:\u003c\/strong\u003e Provides a rigid polypropylene woofer diaphragm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated 6 dB Crossover:\u003c\/strong\u003e Directs appropriate frequencies to the tweeter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX4 uses a graphite-reinforced polypropylene woofer cone, butyl rubber surround, PEI dome tweeter, and an 8-ounce magnet structure. Its coaxial layout places the tweeter over the woofer to keep the package compact. Speaker grilles are included for installations where the vehicle does not provide factory protection.\u003c\/p\u003e\u003cp\u003eCheck available clearance against the listed 1.75-inch mounting depth and verify the approximately 3.69-inch cutout requirement before ordering. Vehicle-specific mounting brackets, wiring adapters, or hardware may be needed depending on the factory location. Match each speaker to an amplifier or radio channel appropriate for a 4-ohm speaker with 20 watts RMS handling.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843353764031,"sku":"PRX4","price":33.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/1_b0cf863e-779c-4d14-845f-1f26e6eb8322.jpg?v=1783901656"},{"product_id":"memphis-ms69","title":"Memphis MS69 6x9\" Convertible Car Speaker Set","description":"\u003cp\u003eThe Memphis MS69 is a 6x9-inch MSeries convertible car speaker set designed for vehicle owners who want an upgrade path beyond a fixed coaxial speaker layout. Its removable, multi-mount tweeter allows the system to be used in a conventional coaxial configuration or arranged as a component-style installation. This flexibility helps accommodate vehicles with limited factory speaker locations as well as custom door, dash, or panel installations.\u003c\/p\u003e\u003cp\u003eWith a 75-watt RMS and 150-watt peak power rating, the MS69 is suited to systems using an aftermarket head unit or a properly matched external amplifier. Its 91 dB sensitivity supports efficient output from available power. The speaker is intended for listeners seeking accurate, full-range reproduction from a 6x9-inch format.\u003c\/p\u003e\u003cp\u003eA carbon fiber cone forms the foundation of the woofer design, combining low moving mass with a durable construction. The rubber surround is designed to support controlled cone movement over time. Together, these materials support a clear, composed presentation through the speaker's operating range.\u003c\/p\u003e\u003cp\u003eThe center-mounted tweeter can swivel when the MS69 is configured as a coaxial speaker, allowing its output to be aimed more effectively toward the listening area. For a component-style layout, the tweeter can be removed and a phase plug installed in its place. This gives installers more freedom to position high frequencies where they work best in the vehicle.\u003c\/p\u003e\u003cp\u003eExternal passive crossovers divide the signal between the woofer and tweeter, while the MClip mounting solution provides a practical way to secure a crossover near the speaker or elsewhere in the installation. The crossover includes a selectable 0 dB or -3 dB tweeter setting for basic high-frequency level adjustment. A grille is included for installations where added driver protection or a finished appearance is needed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConvertible Speaker Design:\u003c\/strong\u003e Supports coaxial or component-style system layouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Mount Tweeter:\u003c\/strong\u003e Allows flexible tweeter placement for custom installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwivel Tweeter:\u003c\/strong\u003e Helps aim highs in coaxial speaker installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon Fiber Cone:\u003c\/strong\u003e Provides a lightweight, durable woofer diaphragm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Passive Crossovers:\u003c\/strong\u003e Direct frequencies to the appropriate speaker drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMClip Crossover Mounting:\u003c\/strong\u003e Provides a removable crossover mounting method.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MS69 uses a 6x9-inch carbon fiber woofer cone, rubber surround, removable tweeter assembly, external passive crossover network, and 13-ounce magnet. Its included grille can be used where the speaker is not fully protected by a factory panel or grille. The design supports either a center-mounted coaxial tweeter arrangement or a separated component-style layout.\u003c\/p\u003e\u003cp\u003eBefore purchase, confirm that the vehicle accepts a 6x9-inch speaker and provides at least 3 inches of mounting depth. In coaxial use, the tweeter remains mounted at the center of the woofer and can be aimed; in component use, remove the tweeter, install the phase plug, and mount the tweeter separately. Connect the external crossover between the amplifier or radio output and the woofer\/tweeter, then use the MClip system or another secure location for crossover mounting.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843353796799,"sku":"MS69","price":138.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/1_98bce7b5-bce8-4c60-91a2-f92a3627270f.jpg?v=1783901659"},{"product_id":"memphis-mx400-4","title":"MEMPHIS MX400-4 4-Channel Powersports Amplifier","description":"\u003cp\u003eThe Memphis MX400-4 is a compact four-channel powersports amplifier designed to add clean, flexible amplification where space is limited. It is built for side-by-side, ATV, motorcycle, and similar off-road audio installations that need more output than a source unit can provide. Its weather-resistant construction helps support dependable installation in exposed vehicle environments.\u003c\/p\u003e\u003cp\u003eWith 75 watts RMS per channel at 4 ohms or 100 watts RMS per channel at 2 ohms, the MX400-4 can power front and rear speakers from one compact chassis. It can also be bridged to two channels at 200 watts RMS each into 4 ohms. This makes it useful for full-range speaker systems, or for systems that need a more focused two-channel configuration.\u003c\/p\u003e\u003cp\u003eThe amplifier uses efficient Class D technology and has a 10 Hz to 20 kHz frequency response for full-range system use. Independent front and rear sensitivity controls allow the amplifier to be matched to the output level of the source unit. A selectable 2-channel or 4-channel input mode can simplify wiring when the source provides only one pair of audio outputs.\u003c\/p\u003e\u003cp\u003eIts IP66-rated chassis, conformal-coated circuit board, and sealed connectors are engineered for resistance to dust, water spray, and the elements. A protective top cover shields the tuning controls while keeping them accessible after installation. The compact chassis is especially practical for tight mounting locations common in powersports vehicles.\u003c\/p\u003e\u003cp\u003eThe MX400-4 accepts both low-level RCA and speaker-level input signals, helping it integrate with aftermarket or factory-style source units. Fixed 80 Hz high-pass and low-pass crossover options help direct the appropriate frequency range to connected speakers. Pair it with properly matched speakers, a suitable 8-gauge amplifier wiring kit, and a fused power connection for a complete powersports audio upgrade.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Output:\u003c\/strong\u003e Powers up to four speakers from one compact amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D Design:\u003c\/strong\u003e Provides efficient full-range amplification for powersports systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP66-Rated Chassis:\u003c\/strong\u003e Helps resist dust, water spray, and outdoor conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConformal-Coated Board:\u003c\/strong\u003e Adds protection for internal electronics in exposed installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixed 80 Hz Crossovers:\u003c\/strong\u003e Supports high-pass, low-pass, or full-range channel setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- And Low-Level Inputs:\u003c\/strong\u003e Connects with RCA-equipped or speaker-level source units.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MX400-4 uses a compact weather-resistant chassis with sealed connectors, a conformal-coated circuit board, and a protective cover over its top-mounted controls. These details support use in powersports applications where vibration, dust, and water exposure are common considerations. Its status LED indicates normal operation or protection status.\u003c\/p\u003e\u003cp\u003eMount the amplifier in a secure location with practical access to the control cover and adequate cable routing. The recommended Memphis 8GKIT wiring kit is specified for installation, while an 8-gauge power and ground connection with a 40A fuse is recommended. Use the included input harness that matches the source signal type, select 2-channel or 4-channel input mode as needed, and set each channel pair to high-pass, low-pass, or full-range operation.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843353862335,"sku":"MX400-4","price":152.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/MX400.4-5.jpg?v=1783904500"},{"product_id":"memphis-viv68dsp","title":"Memphis VIV68DSP 6-In\/8-Out Digital Sound Processor","description":"\u003cp\u003eThe Memphis VIV68DSP is a 6-input, 8-output digital sound processor for building a more precisely tuned vehicle audio system. It accepts factory-style speaker-level signals as well as RCA, optical, and Bluetooth audio sources. Its processing tools help shape a system’s signal before it reaches external amplifiers.\u003c\/p\u003e\u003cp\u003eThis processor is intended for enthusiasts upgrading a factory or aftermarket system that needs more control than a head unit alone can provide. Signal sensing, input summing, and adjustable channel routing support integration into a range of system layouts. Eight low-level output channels provide flexibility for active front stages, rear speakers, and subwoofer channels.\u003c\/p\u003e\u003cp\u003eThe VIV68DSP gives each output channel an independent 31-band equalizer, crossover filtering, phase selection, and time alignment. This lets the installer balance tonal response, define speaker operating ranges, and align arrival times at the listening position. The result is a more deliberate, system-specific tuning approach rather than one global adjustment.\u003c\/p\u003e\u003cp\u003eIts app-based control platform works with PC, iOS, and Android devices, while wireless connectivity supports control and audio streaming. Crossover selection includes Butterworth, Linkwitz-Riley, and Bessel filter characteristics, with adjustable frequency, slope, and output settings. Six preset memories make it practical to save tuned configurations for later recall.\u003c\/p\u003e\u003cp\u003eThe VIV68DSP fits between the source unit and external amplifiers in a multi-amplifier upgrade path. It can retain an OEM radio through its six-channel high-level input capability or work with aftermarket RCA and optical sources. A wired remote connection supports preset recall and level control, with channels 7 and 8 assigned by default for remote subwoofer-level control.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 Inputs, 8 Outputs:\u003c\/strong\u003e Supports flexible routing for complex amplified audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e31-Band EQ Per Channel:\u003c\/strong\u003e Allows detailed tonal adjustment on every output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndependent Crossovers:\u003c\/strong\u003e Sets high-pass or low-pass filtering per channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTime Alignment:\u003c\/strong\u003e Adjusts output delay for a more coherent listening position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Source Inputs:\u003c\/strong\u003e Accommodates high-level, RCA, optical, and Bluetooth sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApp-Based Tuning:\u003c\/strong\u003e Provides setup control from PC, iOS, or Android devices.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VIV68DSP uses a connection layout with six speaker-level inputs, six RCA inputs, an optical input, eight RCA outputs, power terminals, a remote-control connector, Bluetooth antenna connection, PC control port, and RGB LED output. Its output channels are individually configurable through the DSP software. Ground-isolation jumpers are provided and should only be adjusted with power switched off.\u003c\/p\u003e\u003cp\u003eInstall the processor between the source unit and external amplifiers, using the input type appropriate for the vehicle’s radio or audio source. It requires a DC 8.5V to 16.5V supply, ground, and either a 12V remote trigger or signal sensing at inputs 1 and 2; the manual specifies an in-line 3A fuse on the +12V line. For system tuning, disable amplifier crossover and bass-boost processing where possible so the DSP can manage equalization and crossover duties.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843353993407,"sku":"VIV68DSP","price":256.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/viv68dsp-lr.jpg?v=1783904385"},{"product_id":"memphis-se210","title":"Memphis SE210 Dual 10\" Ported Subwoofer Enclosure With Amplifier","description":"\u003cp\u003eThe Memphis SE210 is an all-in-one bass package built around a dual 10-inch loaded enclosure and a matched SE2000.1DF mono amplifier. It provides a straightforward way to add dedicated low-frequency output to a vehicle audio system without selecting each major bass component separately. The package is designed for shoppers who want a compact, pre-matched starting point for a trunk or cargo-area bass upgrade.\u003c\/p\u003e\u003cp\u003eIts ported enclosure design is intended to emphasize bass output, while the two Street Edge woofers use polypropylene cones and rubber surrounds. Each woofer incorporates a 1.5-inch copper voice coil and Direct Vent Voice Coil Cooling. Together, these features support a focused low-end addition for music that benefits from more impact and depth.\u003c\/p\u003e\u003cp\u003eThe enclosure is internally wired to a 1-ohm total load at its spring-post terminals. Memphis lists the package at 500 watts RMS and 1,000 watts peak at 1 ohm, with alternate published RMS\/peak ratings at 2 and 4 ohms. The included mono amplifier is matched to the enclosure package and includes adjustable bass-management controls.\u003c\/p\u003e\u003cp\u003eThe SE210 is suited to drivers upgrading a factory or aftermarket audio system that can provide an RCA-level signal to the amplifier. Its included remote level control gives the driver a convenient way to adjust bass level from the listening position. A separate amplifier wiring kit, fuse, and speaker wire are needed to complete installation.\u003c\/p\u003e\u003cp\u003eFor a practical system build, the SE210 combines the loaded enclosure, amplifier, and remote control in one package while leaving source-unit integration and vehicle-specific installation parts flexible. The enclosure can be used in a trunk, hatch, or cargo area where its dimensions allow adequate clearance and amplifier ventilation. It is a focused bass solution for systems where a separate full-range speaker upgrade may be added later.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 10-Inch Woofers:\u003c\/strong\u003e Two loaded Street Edge subwoofers provide dedicated bass reinforcement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorted Enclosure:\u003c\/strong\u003e Vented cabinet design supports strong bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Mono Amplifier:\u003c\/strong\u003e SE2000.1DF amplifier is supplied as part of the package.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Internal Wiring:\u003c\/strong\u003e Enclosure terminals present a 1-ohm total load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCopper Voice Coils:\u003c\/strong\u003e 1.5-inch copper coils support the woofer motor design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Level Control:\u003c\/strong\u003e Included remote allows convenient bass-level adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe SE210 enclosure is constructed from MDF and finished in gray carpet with Custom Street Edge embroidery. Its woofers use polypropylene cones, rubber surrounds, 27-ounce magnets, and Direct Vent Voice Coil Cooling. A single set of spring-post terminals provides the enclosure connection point.\u003c\/p\u003e\u003cp\u003eMount the enclosure securely in a suitable cargo area, leaving room around the amplifier for ventilation and access to controls. Installation requires power, ground, turn-on, signal, and speaker connections; a 4-gauge amplifier wiring kit and a 60-amp fuse are recommended, while wiring, fuse, and installation hardware are not included. Use the amplifier's gain, low-pass, subsonic, bass-boost, and phase controls during setup to integrate the bass package with the rest of the system.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843354026175,"sku":"SE210","price":176.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/se210-lr.jpg?v=1783904444"},{"product_id":"memphis-mjme6d1tv2","title":"MEMPHIS MJME6D1TV2 Dual 6.5\" 1-Ohm Loaded Truck Enclosure","description":"\u003cp\u003eThe Memphis MJME6D1TV2 is a loaded, thin-profile truck enclosure with two 6.5-inch MOJO Mini subwoofers. It is designed to add substantial low-frequency reinforcement where conventional subwoofer boxes may take up too much cabin space. Its behind-seat-oriented shape makes it a practical option for many single-cab trucks and other space-conscious vehicle builds.\u003c\/p\u003e\u003cp\u003eThis enclosure is intended for listeners who want a complete bass enclosure rather than assembling separate subwoofers and a custom box. The dual-driver, ported configuration is prewired to a 1-ohm final impedance for use with a compatible external amplifier. With 1,400 watts RMS total power handling, it is suited to systems built around a high-output mono amplifier.\u003c\/p\u003e\u003cp\u003eThe ported enclosure design supports strong low-frequency output while the compact wedge profile helps preserve usable interior space. Memphis specifies a 48-150 Hz frequency response and 82 dB sensitivity for the loaded system. This gives the enclosure a focused role as the dedicated bass foundation in a full-range vehicle audio system.\u003c\/p\u003e\u003cp\u003eMOJO Mini driver engineering includes fiberglass-reinforced cones, V-Groove high-excursion rubber surrounds, and vented cast-aluminum baskets. The 4-layer wound copper voice coils use Memphis DVVC Direct Vent Voice Coil Cooling to help manage heat during extended playback. An aluminum heat sink further supports thermal dissipation around the subwoofer assembly.\u003c\/p\u003e\u003cp\u003eThe MJME6D1TV2 comes loaded and wired, simplifying the subwoofer portion of a truck audio upgrade. Pair it with an amplifier designed to operate safely at a 1-ohm load and match amplifier output appropriately to the enclosure's 1,400-watt RMS rating. Its carpet-wrapped exterior also gives the installation a finished appearance without requiring a separate custom enclosure.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 6.5-Inch MOJO Mini Subwoofers:\u003c\/strong\u003e Provides a compact, preloaded bass solution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Final Impedance:\u003c\/strong\u003e Ready for a compatible 1-ohm-stable amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,400W RMS Handling:\u003c\/strong\u003e Supports high-power mono amplifier system designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorted Truck Enclosure:\u003c\/strong\u003e Helps produce strong bass from a slim footprint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVVC Cooling:\u003c\/strong\u003e Direct voice-coil ventilation helps manage operating heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBehind-Seat Profile:\u003c\/strong\u003e Designed for many truck and tight-space installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe enclosure has a carpet-wrapped exterior and a ported wedge-shaped cabinet design. Its subwoofers use vented cast-aluminum baskets, fiberglass-reinforced cones, V-Groove rubber surrounds, 4-layer copper voice coils, and heat-dissipating aluminum components. The overall design is intended to balance durability, thermal management, and limited-depth vehicle placement.\u003c\/p\u003e\u003cp\u003eMeasure the available installation area before ordering, especially width, height, top depth, and bottom depth behind the seat. Connect the enclosure's spring-post terminals with speaker wire up to 10 AWG, then use an external amplifier that is rated for a 1-ohm load. Two mounting brackets and associated hardware are included to help secure the enclosure; use a solid mounting surface and follow safe vehicle-audio wiring practices.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843354058943,"sku":"MJME6D1TV2","price":279.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/MJME6D1TV2-4-LR.jpg?v=1783904417"},{"product_id":"memphis-mjme6d1tv2-1","title":"Memphis MJME6D1TV2 Dual 6.5\" Ported Truck Subwoofer","description":"\u003cp\u003eThe Memphis Audio MJME6D1TV2 is a loaded, ported truck-style subwoofer enclosure with two 6.5-inch MOJO Mini subwoofers. It is designed for adding bass where conventional large enclosures may not fit, especially behind the seat of many single-cab trucks. The enclosure presents one 1-ohm final load at its spring-post input terminals.\u003c\/p\u003e\u003cp\u003eThis model is intended for vehicle owners building a compact bass system without separately selecting and installing an enclosure and pair of woofers. Its thin-profile shape is made for space-limited locations, while the ported cabinet is tuned for strong low-frequency output. The loaded design also simplifies the physical speaker-and-box portion of a subwoofer upgrade.\u003c\/p\u003e\u003cp\u003eWith 1,400 watts RMS and 2,800 watts peak power handling for the complete enclosure, the MJME6D1TV2 is suited to an appropriately matched external amplifier. Its stated frequency response is 48-150 Hz, focusing its role on bass reproduction rather than full-range playback. The two drivers are wired in parallel to provide the enclosure's 1-ohm final impedance.\u003c\/p\u003e\u003cp\u003eMOJO Mini driver construction includes fiberglass-reinforced cones, stitched foam surrounds, vented cast-aluminum baskets, and 4-layer wound copper voice coils. Memphis DVVC Direct Vent Voice Coil Cooling and aluminum heat-sink elements are incorporated to help manage heat during demanding playback. These features support the enclosure's compact, high-power design.\u003c\/p\u003e\u003cp\u003eThe carpet-wrapped cabinet gives the installation a finished appearance while helping protect the enclosure surface from everyday scuffs. Its 36.1-inch width, 14.2-inch height, 3.5-inch top depth, and 7.5-inch bottom depth should be measured against the intended vehicle location before purchase. Use it with a compatible amplifier, suitable power wiring, and a secure mounting plan for a complete bass upgrade.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 6.5-Inch MOJO Mini Drivers:\u003c\/strong\u003e Two compact subwoofers share one loaded enclosure for space-conscious bass installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorted Truck Enclosure:\u003c\/strong\u003e The vented cabinet design is intended for higher-output bass performance in a shallow profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Final Impedance:\u003c\/strong\u003e The two 2-ohm drivers are factory wired in parallel at the enclosure terminals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,400-Watt RMS Handling:\u003c\/strong\u003e Supports use with an external amplifier matched to the enclosure's continuous rating and impedance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVVC Cooling System:\u003c\/strong\u003e Direct voice-coil venting and aluminum heat-sink elements help manage operating heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarpet-Wrapped Finish:\u003c\/strong\u003e The finished exterior is designed for a clean appearance in truck and custom vehicle installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJME6D1TV2 uses a ported, carpet-wrapped enclosure loaded with two MOJO Mini subwoofers. Driver details include fiberglass-reinforced cones, stitched foam surrounds, vented cast-aluminum baskets, and 4-layer wound copper voice coils. The enclosure is a thin-profile truck-box design with a 3.5-inch top depth and 7.5-inch bottom depth.\u003c\/p\u003e\u003cp\u003eConfirm available mounting space before installation, particularly the 36.1-inch width and 14.2-inch height. Connect an amplifier that is designed to operate at the enclosure's 1-ohm final impedance, using speaker wire up to 10 AWG at the single spring-post terminal set. The included mounting brackets and hardware can be used to secure the enclosure; no amplifier is included with the listed package contents.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843354615999,"sku":"MJME6D1TV2","price":279.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/719J9nRz31L.jpg?v=1783901922"},{"product_id":"memphis-mx400-5","title":"Memphis MX400-4 4-Channel Powersports Amplifier","description":"\u003cp\u003eThe Memphis MX400-4 is a compact four-channel powersports amplifier designed to add dedicated amplification to compatible off-road, side-by-side, and marine-style audio systems. It provides four amplified channels for full-range speakers, helping a system achieve stronger output than a source unit can typically supply on its own. Its compact housing supports installations where available mounting space is limited.\u003c\/p\u003e\u003cp\u003eThis amplifier is intended for riders and installers building or expanding a powersports audio system with multiple speakers. It delivers 75 watts RMS per channel at 4 ohms or 100 watts RMS per channel at 2 ohms, making it suitable for matching with compatible full-range speakers. It can also be bridged to provide two 200-watt RMS channels at 4 ohms.\u003c\/p\u003e\u003cp\u003eThe MX400-4 is built for applications exposed to water, dust, and changing outdoor conditions. Its IP66-rated water and element resistance, conformal-coated circuit board, and sealed connectors support use in demanding powersports environments. A protective cover over the top-mounted controls helps keep the tuning area shielded while maintaining access during setup.\u003c\/p\u003e\u003cp\u003eFor system tuning, the amplifier includes a fixed 80 Hz crossover and supports both high-level and low-level input compatibility. Its 2\/4-input switch can simplify signal routing when connecting compatible audio sources. The 10 Hz to 20 kHz frequency response allows the amplifier to cover the normal full-range signal spectrum used by compatible speaker systems.\u003c\/p\u003e\u003cp\u003eThe MX400-4 fits naturally into a staged powersports upgrade, whether powering four speakers directly or operating as a bridged two-channel amplifier. It is specified for use with Memphis' recommended 8GKIT amplifier wiring kit. Proper speaker impedance, secure mounting, and protected power wiring are important for a reliable installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Output:\u003c\/strong\u003e Powers up to four compatible full-range speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W x 4 RMS at 4 Ohms:\u003c\/strong\u003e Provides continuous power for properly matched speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Stable Operation:\u003c\/strong\u003e Delivers 100W x 4 RMS at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Channels:\u003c\/strong\u003e Supports 200W x 2 RMS at 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP66 Resistance:\u003c\/strong\u003e Helps protect the amplifier from water and elements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixed 80 Hz Crossover:\u003c\/strong\u003e Provides a defined crossover point for system setup.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MX400-4 uses a compact chassis measuring 8.75 by 3.25 by 1.75 inches. Its conformal-coated board, sealed connectors, and protected top-mounted controls are designed for powersports applications where exposure resistance and packaging flexibility matter. The amplifier carries an IP66 water- and element-resistance rating.\u003c\/p\u003e\u003cp\u003eInstall the amplifier in a secure location with appropriate ventilation and protected wiring paths. Use compatible high-level or low-level source connections, match speakers to supported 2- or 4-ohm operation, and use the recommended 8GKIT wiring kit. When bridging channels, use a 4-ohm speaker load per bridged channel pair and follow the manufacturer wiring guidance.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843354648767,"sku":"MX400-4","price":152.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/511a5T0gkzL_6bebbb3e-67ad-401a-b648-014095ba2745.jpg?v=1783901925"},{"product_id":"memphis-prx5-1","title":"Memphis PRX5 5.25\" Speakers + PRX60C 6.5\" Components","description":"\u003cp\u003eThis speaker package combines Memphis Audio PRX5 5.25-inch coaxial speakers with the PRX60C 6.5-inch oversized component speaker set. It is intended for vehicles that use these two speaker sizes and need an upgrade from factory-installed speakers. The package provides separate front-stage component hardware alongside a pair of compact coaxial speakers for additional factory-location replacement options.\u003c\/p\u003e\u003cp\u003eThe PRX60C is a 2-way component system with separate 6.5-inch mids, separate 1-inch poly dome tweeters, and external crossovers. Separating the tweeters from the midrange drivers allows the installer to place high frequencies independently of the door speakers where the vehicle layout permits. The PRX5 is a 2-way coaxial design, combining its PEI dome tweeter and woofer in each 5.25-inch speaker.\u003c\/p\u003e\u003cp\u003eBoth speaker models use a 4-ohm nominal impedance for compatibility with typical car-audio speaker channels. The PRX60C is rated at 50 watts RMS and 100 watts peak, while each PRX5 is rated at 30 watts RMS and 60 watts peak. Their respective 88 dB and 87 dB sensitivity ratings make them practical choices for factory-radio replacement systems or appropriately power-matched aftermarket amplification.\u003c\/p\u003e\u003cp\u003eThe PRX5 uses a graphite-reinforced polypropylene cone, butyl rubber surround, and a pivoting tweeter arrangement. Its integrated 6 dB tweeter crossover is built into the coaxial speaker design. The PRX60C uses a polypropylene cone, butyl rubber surround, separate poly dome tweeters, and separate crossovers for a more configurable component installation.\u003c\/p\u003e\u003cp\u003eThis package works well for an installer planning a mixed-size system across compatible factory locations. Confirm the vehicle's speaker openings, mounting depth, and wiring requirements before purchase, because speaker size alone does not guarantee direct fitment. The included grilles can be useful for custom or exposed installations, while factory door-panel installations may use the vehicle's original grilles instead.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixed-Size Speaker Package:\u003c\/strong\u003e Combines 6.5-inch components with 5.25-inch coaxial speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePRX60C Component Set:\u003c\/strong\u003e Includes separate mids, tweeters, and external crossovers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePRX5 Pivot Tweeters:\u003c\/strong\u003e Allows high-frequency direction to be adjusted during installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches common car-audio speaker-channel configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eButyl Rubber Surrounds:\u003c\/strong\u003e Used on both listed speaker models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Grilles:\u003c\/strong\u003e Both PRX5 and PRX60C specifications list grilles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX5 coaxial speakers use graphite-reinforced polypropylene cones, PEI dome tweeters, integrated 6 dB tweeter crossovers, and butyl rubber surrounds. The PRX60C component set uses polypropylene midrange cones, butyl rubber surrounds, separate poly dome multi-mount tweeters, and separate crossover networks. Both models are part of Memphis Audio's Power Reference speaker line.\u003c\/p\u003e\u003cp\u003eVerify the mounting location before installation: the PRX5 has a listed mounting depth of 2.125 inches, while the PRX60C has a listed mounting depth of 2.5 inches. Install the PRX60C tweeters and crossovers securely, route wiring away from moving mechanisms and sharp edges, and observe speaker polarity. Match each speaker channel to its 4-ohm load and RMS rating rather than relying on peak-power figures.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843354681535,"sku":"PRX5","price":45.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81zHEBdcAuL.jpg?v=1783901928"},{"product_id":"memphis-prx60c-1","title":"Memphis PRX60C 6.5\" Component Speaker System","description":"\u003cp\u003eThe Memphis PRX60C is a 6.5-inch oversized, two-way component speaker system designed to replace factory door speakers with a more configurable front-stage upgrade. It combines separate woofers, separate tweeters, and external crossover networks rather than placing every driver in one speaker basket. This layout is suited to vehicles with dedicated tweeter locations or installations where the tweeters can be mounted separately.\u003c\/p\u003e\u003cp\u003eThis system is intended for listeners upgrading common OEM speaker locations while retaining a conventional 4-ohm speaker load. Each set is rated for 50 watts RMS and 100 watts peak power handling, making power matching straightforward when selecting an aftermarket amplifier or compatible head-unit power. The 88 dB sensitivity rating and component layout support a practical daily-driver audio upgrade.\u003c\/p\u003e\u003cp\u003eThe PRX60C uses polypropylene woofer cones and butyl rubber surrounds for the midrange drivers. Separate 1-inch poly dome tweeters handle high-frequency reproduction, while the included external crossovers direct the appropriate signal range to each driver. Separating the tweeters from the woofers allows more flexibility when aiming and positioning the high-frequency drivers.\u003c\/p\u003e\u003cp\u003eMemphis supplies multi-mount tweeter hardware so the tweeters may be installed in flush, surface, or angled surface-mount configurations. This is useful when factory sail panels, dash locations, or custom panels determine where the tweeters can be placed. The woofers have a 2.5-inch mounting depth, so installation should begin with a check of door-panel and window-clearance space.\u003c\/p\u003e\u003cp\u003eThe PRX60C can serve as a front-speaker upgrade in a factory-system refresh or as part of a larger amplified system. Its included crossovers, wiring leads, mounting hardware, and grilles provide the core pieces needed for speaker installation, although vehicle-specific adapters or harnesses may still be required. Confirm the vehicle's speaker opening, mounting depth, wiring polarity, and available tweeter location before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component Design:\u003c\/strong\u003e Separate woofers and tweeters allow more flexible speaker placement than coaxial designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Crossovers:\u003c\/strong\u003e Included passive networks route appropriate frequencies to the woofer and tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Poly Dome Tweeters:\u003c\/strong\u003e Separate tweeters can be positioned for the desired installation layout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cones:\u003c\/strong\u003e Lightweight cones provide the primary midrange and midbass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eButyl Rubber Surrounds:\u003c\/strong\u003e Durable surrounds support controlled woofer movement in automotive use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Load:\u003c\/strong\u003e Compatible with typical car-audio speaker channels designed for 4-ohm speakers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX60C includes two oversized 6.5-inch woofers, two 1-inch tweeters, and two external crossover networks. The woofer design uses polypropylene cones, butyl rubber surrounds, and 10-ounce magnets. Included grilles provide an option for custom or exposed speaker installations.\u003c\/p\u003e\u003cp\u003eMeasure the factory opening against the 5.557-inch woofer cutout requirement and verify the 2.5-inch top-mount depth before mounting. Connect each amplifier or radio channel to its crossover input, then connect the crossover's woofer and tweeter outputs to their respective drivers. The tweeters can be flush-mounted, surface-mounted, or installed in angled surface-mount housings; use the supplied template and hardware where appropriate.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843354714303,"sku":"PRX60C","price":99.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/811YRYkw3SL.jpg?v=1783901931"},{"product_id":"memphis-se210-1","title":"Memphis SE210 Dual 10\" Ported Bass Package With Amplifier","description":"\u003cp\u003eThe Memphis SE210 is a complete bass package built around a dual 10-inch loaded enclosure and a matching SE2000.1DF mono amplifier. It is designed for vehicle owners who want to add dedicated low-frequency output without selecting separate subwoofers, enclosure, and amplifier components. The package brings together the primary bass components in a coordinated system.\u003c\/p\u003e\u003cp\u003eIts ported enclosure is intended to support strong bass output from the two Street Edge 10-inch subwoofers. Polypropylene cones and rubber surrounds provide the woofer assembly, while the enclosure is finished with Custom Street Edge embroidery. This makes the SE210 a practical choice for adding bass reinforcement to a factory or aftermarket audio system.\u003c\/p\u003e\u003cp\u003eEach included woofer uses a 1.5-inch copper voice coil and a 27-ounce magnet. Memphis Direct Vent Voice Coil Cooling technology is used to help manage voice-coil heat during operation. The dual-subwoofer assembly is rated at 400 watts RMS and 800 watts peak power.\u003c\/p\u003e\u003cp\u003eThe included SE2000.1DF mono amplifier provides selectable power capability based on the connected impedance load. It is rated for up to 500 watts RMS and 1,000 watts peak at 1 ohm, with lower power ratings at 2 and 4 ohms. Its frequency response, low-pass crossover, and subsonic filter are designed specifically for subwoofer-duty use.\u003c\/p\u003e\u003cp\u003eThe SE210 is suited to trunk, cargo-area, or behind-seat installations where its enclosure dimensions fit securely. It can be used with an aftermarket receiver or a factory system when the appropriate signal integration is added. A separate amplifier wiring kit and enclosure-to-amplifier speaker wire are required for installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 10-Inch Subwoofers:\u003c\/strong\u003e Two loaded Street Edge woofers provide dedicated bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorted Enclosure:\u003c\/strong\u003e The enclosure is ported to support efficient bass performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Mono Amplifier:\u003c\/strong\u003e A SE2000.1DF amplifier is supplied with the package.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cones:\u003c\/strong\u003e SE-branded polypropylene cones form each woofer diaphragm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVVC Cooling:\u003c\/strong\u003e Direct Vent Voice Coil Cooling helps manage voice-coil heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Level Control:\u003c\/strong\u003e A wired remote level control is included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe enclosure uses heavy-duty MDF construction and carpet covering with Custom Street Edge embroidery. Its two woofers use rubber surrounds, 1.5-inch copper voice coils, and 27-ounce magnets. The ported cabinet measures 24.6 inches wide by 11 inches high, with 8.7-inch top depth and 10.6-inch bottom depth.\u003c\/p\u003e\u003cp\u003eMount the enclosure securely in a suitable vehicle cargo area and mount the amplifier where it has adequate ventilation. The package includes the enclosure, amplifier, remote level control, remote cable, mounting screws, and amplifier fuses, but it does not include an amplifier wiring kit or speaker wire between the amplifier and enclosure. A 4-gauge power and ground wiring kit with a 60-amp fuse is recommended for installation.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843354747071,"sku":"SE210","price":176.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/1_8b63d5fc-b5e4-473c-b919-979a5ecb672a.jpg?v=1783901934"},{"product_id":"memphis-srxs1044v","title":"Memphis SRXS1044V 10\" Dual 4Ω Shallow-Mount Subwoofer","description":"\u003cp\u003eThe Memphis SRXS1044V is a 10-inch shallow-mount car subwoofer designed to add low-frequency output where installation depth is limited. Its 3.3-inch mounting depth helps it fit applications that cannot accommodate a conventional full-depth woofer. The dual 4-ohm voice-coil design provides flexibility when planning a compatible amplifier and wiring layout.\u003c\/p\u003e\u003cp\u003eThis Street Reference shallow subwoofer is intended for vehicle audio upgrades that need bass reinforcement without taking up excessive space. It is suitable for compact trunks, behind-seat locations, and custom enclosures where depth is a primary concern. The driver is rated for 250 watts RMS and 500 watts peak power handling.\u003c\/p\u003e\u003cp\u003eA polypropylene cone and rubber surround form the primary moving assembly. These materials are paired with a progressive poly-cotton spider intended to support controlled cone movement. Memphis also uses a sub-cone design intended to improve efficiency.\u003c\/p\u003e\u003cp\u003eThe SRXS1044V works with either sealed or ported enclosures, allowing the enclosure design to be selected around available space and preferred system goals. A sealed enclosure can be chosen for a compact installation, while a ported design can be used when the enclosure is engineered specifically for the driver. Proper enclosure construction and amplifier setup remain important for reliable operation.\u003c\/p\u003e\u003cp\u003eAn anodized aluminum voice-coil former and stamped-steel frame support the subwoofer's shallow-format construction. The speaker uses 12 AWG compression terminals for its connections. It can serve as a single-driver bass upgrade or as part of a larger multi-subwoofer system when impedance and amplifier capability are matched correctly.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow-Mount Profile:\u003c\/strong\u003e A 3.3-inch mounting depth supports tight installation locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4Ω Voice Coils:\u003c\/strong\u003e Supports flexible system wiring and amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250W RMS Handling:\u003c\/strong\u003e Designed for compatible moderate-power subwoofer amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides a durable cone material for mobile-audio use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Or Ported Ready:\u003c\/strong\u003e Accommodates either enclosure approach when properly designed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 AWG Compression Terminals:\u003c\/strong\u003e Provides secure speaker-wire connection points.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe SRXS1044V combines a polypropylene cone, rubber surround, progressive poly-cotton spider, anodized aluminum voice-coil former, and stamped-steel frame. Its shallow architecture is designed to reduce required mounting depth while retaining a 10-inch woofer format. The listed 40-ounce magnet and 2-inch voice-coil diameter are part of its compact driver design.\u003c\/p\u003e\u003cp\u003eConfirm that the mounting location has at least 3.3 inches of mounting depth and accommodates the 9.22-inch cutout diameter before installation. Use an enclosure designed for this driver, choose sealed or ported construction as appropriate, and pair it with an amplifier whose output and impedance capability match the final voice-coil wiring. A compatible grille option is the Memphis PRXG10; it is sold separately.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843384893631,"sku":"SRXS1044V","price":26.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/SRXS1044V-1200-7.jpg?v=1783903907"},{"product_id":"memphis-mb1024","title":"Memphis MB1024 10\" Selectable-Impedance Subwoofer","description":"\u003cp\u003eThe Memphis MB1024 is a 10-inch car audio subwoofer designed for systems that need meaningful low-frequency output while retaining installation flexibility. Its selectable impedance design allows the same subwoofer to be configured for either 2-ohm or 4-ohm operation. This makes it a practical choice for replacing an existing woofer or planning a system around a compatible mono amplifier.\u003c\/p\u003e\u003cp\u003eWith a 500-watt RMS power rating and 1,000-watt peak rating, the MB1024 is intended for a properly matched amplified subwoofer system. It is suited to listeners who want fuller bass response than factory speakers can provide. The 10-inch format can fit where larger subwoofers may not be practical, provided enclosure and mounting-clearance requirements are met.\u003c\/p\u003e\u003cp\u003eMemphis FLEX selectable impedance technology is the defining feature of this model. It gives installers the option to configure the subwoofer for 2-ohm or 4-ohm use, helping align the woofer with an amplifier's stable operating load. Sensitivity is rated at 84.6 dB in the 2-ohm configuration and 85.3 dB in the 4-ohm configuration.\u003c\/p\u003e\u003cp\u003eThe MB1024 uses an ultra-light aluminum voice coil, a 2-inch four-layer triple voice coil design, and DVVC direct vented voice coil cooling. These elements support power handling and help manage heat during operation. Woven tinsel leads and a polypropylene dust cap complete the working assembly.\u003c\/p\u003e\u003cp\u003eA double-stitched V-Groove folded surround is used to support increased excursion while preserving effective cone area. Memphis provides sealed and vented enclosure recommendations for single- and dual-subwoofer applications. Pair the MB1024 with a suitable enclosure, correctly configured amplifier, and appropriately sized wiring for a focused bass upgrade.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFLEX Selectable Impedance:\u003c\/strong\u003e Choose 2-ohm or 4-ohm operation to suit a compatible amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Handling:\u003c\/strong\u003e Supports properly matched amplified bass systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Driver:\u003c\/strong\u003e Provides a compact format for vehicle subwoofer installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Voice Coil:\u003c\/strong\u003e Supports sensitivity and output with low moving mass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVVC Cooling:\u003c\/strong\u003e Direct venting helps manage voice-coil heat during operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFolded V-Groove Surround:\u003c\/strong\u003e Supports excursion while retaining effective surface area.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MB1024 combines a polypropylene dust cap, woven tinsel leads, ultra-light aluminum voice coil, and double-stitched V-Groove folded surround. Its 2-inch, four-layer triple voice coil and 60-ounce magnet are matched with DVVC direct vented voice coil cooling. The subwoofer has a 10.16-inch outside frame diameter, a 9.17-inch cutout requirement, and a 5.14-inch mounting depth.\u003c\/p\u003e\u003cp\u003eConfirm that the enclosure has at least the required cutout diameter and mounting depth before installation. Memphis recommends a 1.0-cubic-foot sealed enclosure for one subwoofer or a 1.5-cubic-foot gross vented enclosure tuned to 38 Hz; dual-subwoofer recommendations are also available. Configure the selectable impedance setting to match an amplifier that is designed to operate safely at the chosen load.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843384926399,"sku":"MB1024","price":100.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/MB10-7_1000.jpg?v=1783903910"},{"product_id":"pioneer-kmr-m300bt","title":"KENWOOD KMR-M300BT 3-Inch Gauge-Style Marine Receiver","description":"\u003cp\u003eThe KENWOOD KMR-M300BT is a compact digital media receiver designed for boats, UTVs, golf carts, and other applications that use a 3-inch gauge-style opening. It provides AM\/FM and weather-band reception, Bluetooth audio streaming, USB playback, and built-in four-channel amplification without using a CD mechanism. Its compact format helps bring modern source and system-control options to locations where a conventional DIN receiver may not fit.\u003c\/p\u003e\u003cp\u003eThis receiver is intended for installations exposed to moisture, dust, vibration, sunlight, and salt-air conditions. Its faceplate is rated IP66 and the body is rated IPX4, while the circuit board uses conformal coating for improved moisture resistance. The unit also incorporates salt-spray, UV-resistance, and vibration-focused durability measures for outdoor-powered-sports and marine use.\u003c\/p\u003e\u003cp\u003eA built-in amplifier supplies up to 19 watts RMS per channel at 4 ohms or 28 watts RMS per channel at 2 ohms. The 13-band graphic equalizer lets users adjust tonal balance across low, midrange, and high-frequency bands. Independent subwoofer level control is available when the subwoofer RCA output is connected to an external amplifier and subwoofer.\u003c\/p\u003e\u003cp\u003eBluetooth 5.0 supports wireless music playback using A2DP and AVRCP profiles, while the rear USB connection supports compatible mass-storage devices and charging up to 1.5A. USB playback supports MP3, WMA, AAC, and FLAC files, including FLAC files up to 24-bit\/48 kHz. The 2.7-inch color TFT display and variable-color button illumination provide clear source and setting access in a compact dashboard footprint.\u003c\/p\u003e\u003cp\u003eThe KMR-M300BT can serve as the control center for a larger marine audio system. Front, rear, and subwoofer 2.0-volt RCA preouts support external amplification, while a rear camera input can display an optional camera feed. It is SiriusXM-ready with compatible optional hardware and subscription, and it supports the optional KENWOOD KCA-RC35MR wired marine remote for control from additional locations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Focused Protection:\u003c\/strong\u003e IP66 faceplate and IPX4 body ratings support exposed installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Four-Channel Amplifier:\u003c\/strong\u003e Drives compatible 2- to 8-ohm speakers directly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth 5.0 Streaming:\u003c\/strong\u003e Plays music wirelessly from one connected Bluetooth device.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear USB Input:\u003c\/strong\u003e Supports music playback and provides 5V\/1.5A charging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAM\/FM And Weather Band:\u003c\/strong\u003e Adds broadcast radio and USA\/Canada weather-band reception.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Expansion Outputs:\u003c\/strong\u003e Front, rear, and subwoofer preouts support external amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KMR-M300BT uses a round gauge-style chassis with a 2.7-inch color TFT display, LED backlighting, and variable-color illumination. Its faceplate carries an IP66 rating, while the body is IPX4 rated. The design also uses conformal-coated circuit boards and is described by KENWOOD as salt-spray, UV, and vibration resistant.\u003c\/p\u003e\u003cp\u003eInstallation requires a 77 mm (3-inch) circular mounting hole and adequate rear clearance for the chassis, wiring harness, USB lead, antenna, RCA connections, and optional accessories. The unit operates from a 12V DC battery system and uses a 20A fuse. Connect speakers rated from 2 to 8 ohms, use the rear RCA outputs when adding external amplification, and add compatible optional SiriusXM, camera, or KCA-RC35MR remote components as needed.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":45846019801279,"sku":"KMR-M300BT","price":213.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61F8JtLz-xL.jpg?v=1783970106"},{"product_id":"hertz-cp5-1k","title":"Hertz CP 5.1K 5-Channel Car Amplifier","description":"\u003cp\u003eThe Hertz CP 5.1K is a compact five-channel Class D car amplifier designed to power front and rear speakers plus a subwoofer from one chassis. It provides a practical upgrade path for systems that need more output, cleaner control, and dedicated bass amplification without using separate amplifiers. Its selectable five- or three-channel operating configurations support a range of active and bridged system layouts.\u003c\/p\u003e\u003cp\u003eThis amplifier is suited to listeners building a full aftermarket audio system or improving a factory-source setup. It accepts both low-level preamp signals and speaker-level inputs, making it compatible with many aftermarket and factory head units. Automatic remote turn-on from compatible BTL speaker-level radio outputs can simplify integration when a conventional remote lead is unavailable.\u003c\/p\u003e\u003cp\u003eThe CP 5.1K delivers 80 watts RMS to each full-range channel at 4 ohms and 330 watts RMS to the subwoofer channel at 4 ohms. At 2 ohms in five-channel mode, it is rated for 130 watts RMS per full-range channel and 510 watts RMS for the subwoofer channel. This distribution gives a speaker system and subwoofer dedicated power from a single amplifier.\u003c\/p\u003e\u003cp\u003eHertz equips the CP 5.1K with adjustable front, rear, and subwoofer crossover controls for matching the amplifier to the speakers in the vehicle. The subwoofer channel includes a 50 Hz bass boost, a fixed 25 Hz subsonic high-pass filter, and optional remote level control capability. Hi-Res Audio certification and a wide full-range bandwidth support detailed playback in compatible systems.\u003c\/p\u003e\u003cp\u003eThe compact aluminum die-cast chassis is intended for installations where available amplifier space is limited. A full-range front pre-out allows signal pass-through to an additional amplifier if the system is expanded later. With its included input and output harnesses, the CP 5.1K is configured for organized integration into multi-speaker systems.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive-Channel Design:\u003c\/strong\u003e Powers four speakers and one subwoofer from one amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D Amplification:\u003c\/strong\u003e Delivers efficient power in a compact chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi-Res Audio Certified:\u003c\/strong\u003e Supports extended full-range frequency response for detailed playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-In And Speaker-In:\u003c\/strong\u003e Connects to aftermarket or compatible factory audio sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Crossovers:\u003c\/strong\u003e Helps match frequency ranges to connected speakers and subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Sub Level Remote:\u003c\/strong\u003e Enables convenient subwoofer-level adjustment from the driver seat.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CP 5.1K uses an aluminum die-cast casing with a low-profile, compact footprint. Its Class D output stage is designed for efficient operation, while the covered control and connection area keeps the installation layout clean. The amplifier weighs 2.27 kg (5 lb).\u003c\/p\u003e\u003cp\u003eMount the amplifier on a solid surface with ventilation and leave access to the adjustment controls and wiring connections. Use the supplied harnesses for speaker-level input, preamp input, speaker output, and remote input\/output connections as needed. Match connected speakers and subwoofer to the stated minimum impedance requirements, set the crossover controls for the system layout, and use the optional Hertz HRC 02 when in-cabin subwoofer-level adjustment is desired.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":45846019965119,"sku":"CP5-1K","price":411.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/51MJ0TgWRJL_81b6ebbf-62d3-4411-93fa-a8b5f2765abf.jpg?v=1783970112"},{"product_id":"jbl-jblrallybar2blk","title":"JBL RALLYBAR 2 21\" Bluetooth Outdoor Vehicle Soundbar","description":"\u003cp\u003eThe JBL RALLYBAR 2 is a powered 21-inch Bluetooth soundbar designed for UTVs, golf carts, boats, and other recreational vehicles. It combines speakers, amplification, source connectivity, lighting, and mounting hardware in one weather-resistant assembly. This makes it a practical audio upgrade for vehicles where a conventional component system may be difficult to install.\u003c\/p\u003e\u003cp\u003eIts built-in Class-D amplifier delivers 150 watts RMS and up to 300 watts peak power. Four 2.75-inch woofers, two 1-inch tweeters, and dual racetrack passive radiators are used to cover a 45 Hz to 20 kHz frequency range. AI Sound Boost automatically adjusts the audio signal in real time to help maintain clear playback at higher listening levels.\u003c\/p\u003e\u003cp\u003eThe RALLYBAR 2 supports Bluetooth 5.4 streaming, USB music playback, and RCA input for integration with a compatible source unit. When more than one source is connected, USB has priority over Bluetooth, while Bluetooth has priority over RCA input. RCA gain settings support 2V, 4V, and 6V source outputs for more appropriate matching with compatible audio equipment.\u003c\/p\u003e\u003cp\u003eBuilt for exposed installations, the soundbar carries an IP67 water- and dust-resistance rating and operates from a 9 to 16V DC electrical system. Dynamic RGB lighting and onboard map lights add useful illumination and visual customization for evening rides. Bottom-panel controls allow access to lighting functions without requiring a separate controller.\u003c\/p\u003e\u003cp\u003eThe included mounting system is designed for flexible placement on compatible vehicle bars or poles. Two RALLYBAR 2 soundbars can be paired for true stereo, while Auracast connectivity allows compatible JBL speakers to be linked for expanded playback. With Bluetooth, USB, RCA input, and multi-speaker options, it can serve as either a self-contained system or part of a larger recreational-vehicle audio setup.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W RMS Class-D Amplifier:\u003c\/strong\u003e Built-in amplification eliminates the need for a separate external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 Protection:\u003c\/strong\u003e Helps protect the soundbar from dust and water exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAI Sound Boost:\u003c\/strong\u003e Automatically fine-tunes playback in real time for clearer high-output sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth, USB, and RCA Inputs:\u003c\/strong\u003e Provides multiple ways to play music from compatible sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuracast Multi-Speaker Connectivity:\u003c\/strong\u003e Links with compatible JBL speakers for expanded sound coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic RGB Lighting:\u003c\/strong\u003e Adds selectable lighting effects and onboard map-light functions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe RALLYBAR 2 uses an integrated speaker-and-amplifier design with four woofers, two tweeters, and two racetrack passive radiators. Its compact enclosure measures 21-5\/32 inches long and weighs 9.66 pounds. The IP67-rated construction is intended for recreational vehicle environments where dust, mud, and water exposure are considerations.\u003c\/p\u003e\u003cp\u003eInstallation uses the included cleats, C-clamps, rubber strips, hardware, safety cables, and 12-foot power\/ground harness. The mounting system supports top or back mounting, with four cleat positions available for each side of the RALLYBAR 2. Connect the soundbar to a 9-16V DC system with the specified 25A fuse arrangement, then select Bluetooth, USB, or RCA input for playback.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45846581412031,"sku":"JBLRALLYBAR2BLK","price":550.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71_sI6wpyoL.jpg?v=1783980907"},{"product_id":"jbl-jblrallybars2wht","title":"JBL RALLYBAR S2 21\" Outdoor Vehicle Bluetooth Soundbar","description":"\u003cp\u003eThe JBL RALLYBAR S2 is a 21-inch powered Bluetooth soundbar designed for UTVs, golf carts, boats, and other recreational vehicles. It provides a self-contained audio solution for vehicles that need music playback without installing separate speakers and an external amplifier. The Ghost White finish suits compatible outdoor and marine-style installations.\u003c\/p\u003e\u003cp\u003eA built-in Class-D amplifier delivers 150 watts RMS and up to 300 watts peak, while the speaker array combines four 2.75-inch woofers, two 1-inch tweeters, and two racetrack passive radiators. Its specified 45 Hz–20 kHz frequency response supports full-range music playback in an open-air environment. AI Sound Boost continuously adjusts the audio signal in real time.\u003c\/p\u003e\u003cp\u003eThe RALLYBAR S2 is built for exposed installations with an IP67 water- and dust-resistance rating. It operates from a 9–16 VDC electrical system and includes a 12-foot, 12 AWG power\/ground harness. A 25A maximum current draw specification helps installers plan power wiring and circuit protection.\u003c\/p\u003e\u003cp\u003eBluetooth 5.4 provides wireless streaming, while USB disk playback and RCA input add wired and local-media options. The soundbar automatically prioritizes sources in this order: USB disk, Bluetooth, then RCA input. RCA input gain settings of 2V, 4V, and 6V help match the soundbar to different source-unit output levels.\u003c\/p\u003e\u003cp\u003eFor system expansion, two RALLYBAR S2 soundbars can be paired for true stereo playback. It can also connect wirelessly with JBL Auracast-enabled speakers for larger multi-speaker setups. RGB lighting and map-light functions add utility and visual customization alongside the audio system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W RMS Class-D Amplifier:\u003c\/strong\u003e Built-in amplification powers the soundbar without a separate external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 Protection:\u003c\/strong\u003e Helps protect the soundbar against dust and water exposure in outdoor vehicle use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAI Sound Boost:\u003c\/strong\u003e Automatically adjusts audio processing in real time during playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuracast Multi-Speaker Connection:\u003c\/strong\u003e Supports stereo pairing and wireless expansion with compatible JBL speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth, USB, and RCA Playback:\u003c\/strong\u003e Accommodates wireless streaming, USB media, and RCA-connected audio sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Mounting System:\u003c\/strong\u003e Top and rear cleat positions support multiple installation configurations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe RALLYBAR S2 uses an integrated, weather-resistant soundbar design with a Ghost White exterior, internal amplification, passive radiators, RGB lighting, and map-light controls. Its IP67 rating is intended for outdoor recreational-vehicle environments where dust and water exposure are concerns. At 9.48 pounds, it is nearly 1 kg lighter than the prior-generation model according to JBL.\u003c\/p\u003e\u003cp\u003eThe included cleats, C-clamps, rubber strips, security cables, hardware, and 12-foot power\/ground harness support pole-mounted installations. Included clamp and rubber-strip combinations accommodate 1.5-inch, 1.75-inch, and 2-inch poles, while four cleat locations per side allow top or rear mounting arrangements. Connect the harness to a 9–16 VDC vehicle electrical system, use the supplied 25A fused power connection, and select Bluetooth, USB disk, or RCA input for playback.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45846581444799,"sku":"JBLRALLYBARS2WHT","price":428.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71G0JkGnsxL.jpg?v=1783980910"},{"product_id":"jbl-jblrallybarxl2blk","title":"JBL RALLYBAR XL2 35\" Outdoor Vehicle Soundbar","description":"\u003cp\u003eThe JBL RALLYBAR XL2 is a powered 35-inch outdoor vehicle soundbar designed for UTVs, golf carts, boats, and similar recreational vehicles. It combines amplification, speakers, passive radiators, lighting, and mounting hardware in one weather-resistant assembly. This makes it a practical audio upgrade where conventional in-cabin speakers or separate component systems are not appropriate.\u003c\/p\u003e\u003cp\u003eIts built-in Class-D amplifier is rated at 300 watts RMS and drives eight 2.75-inch woofers, two 1-inch tweeters, and four racetrack passive radiators. The system is engineered to produce broad-range sound with substantial low-frequency support from a compact overhead-bar format. AI Sound Boost automatically adjusts audio processing in real time to help maintain clear playback as volume and content change.\u003c\/p\u003e\u003cp\u003eFor outdoor use, the RALLYBAR XL2 carries an IP67 water- and dust-resistance rating. Its operating voltage range of 9 to 16 VDC supports installation on compatible vehicle electrical systems, while the included 10 AWG power\/ground harness is 12 feet long. A 40A fuse is specified for the XL2 power connection.\u003c\/p\u003e\u003cp\u003eMusic can be played through Bluetooth, a USB storage device, or an RCA input. The soundbar automatically prioritizes sources in the order of USB, Bluetooth, then RCA input. RCA input gain can be set for 2V, 4V, or 6V source levels to better match a compatible head unit or audio source.\u003c\/p\u003e\u003cp\u003eThe RALLYBAR XL2 is also suited to expandable recreational-vehicle audio systems. Two XL2 soundbars can be paired for true stereo, and Auracast connectivity supports wireless linking with compatible JBL speakers. Dynamic RGB lighting and map lights add useful visual functionality without requiring a separate lighting accessory.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Class-D Amplifier:\u003c\/strong\u003e Built-in amplification eliminates the need for a separate external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e35-Inch Multi-Driver Array:\u003c\/strong\u003e Eight woofers, two tweeters, and four passive radiators create full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 Protection:\u003c\/strong\u003e Water- and dust-resistant construction supports exposed recreational-vehicle installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAI Sound Boost:\u003c\/strong\u003e Real-time processing helps optimize audio output as music plays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuracast Connectivity:\u003c\/strong\u003e Link compatible JBL speakers or pair two XL2 units for stereo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB And Map Lighting:\u003c\/strong\u003e Built-in lighting includes selectable RGB patterns and map-light brightness settings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe RALLYBAR XL2 uses an integrated soundbar layout measuring 35-11\/32 inches wide, 5 inches deep, and 4-5\/8 inches high. It weighs 16.75 pounds and includes a protective grille structure, LED lighting, bottom-panel controls, and a rotatable JBL logo badge. Its mounting system provides top- and back-mount positioning options, with eight cleat positions for the XL2.\u003c\/p\u003e\u003cp\u003eFor installation, mount the soundbar securely to a suitable 1.5-, 1.75-, or 2-inch vehicle pole using the supplied cleats, C-clamps, and rubber strips. Connect the included 12-foot, 10 AWG power\/ground harness to a compatible 9-16VDC electrical system and use the specified 40A fuse arrangement. Bluetooth is the simplest source connection, while USB playback and RCA input allow integration with stored music or a compatible audio source.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45846581477567,"sku":"JBLRALLYBARXL2BLK","price":734.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71Y9muIIPJL.jpg?v=1783980914"},{"product_id":"jbl-jblrallybarxl2wht","title":"JBL RALLYBAR XL2 35\" Outdoor Vehicle Bluetooth Soundbar","description":"\u003cp\u003eThe JBL RALLYBAR XL2 is a 35-inch powered Bluetooth soundbar designed for UTVs, golf carts, boats, and other recreational vehicles. It provides an all-in-one audio solution where conventional enclosed-car speakers are not practical. The Ghost White finish gives compatible open-air vehicles a clean, integrated appearance.\u003c\/p\u003e\u003cp\u003eA built-in 300W RMS Class-D amplifier powers an array of eight 2.75-inch woofers, two 1-inch tweeters, and four racetrack passive radiators. This integrated design eliminates the need to match the soundbar to a separate external amplifier. Its 45Hz-20kHz frequency response is suited to full-range music playback in open outdoor environments.\u003c\/p\u003e\u003cp\u003eThe RALLYBAR XL2 uses JBL AI Sound Boost to fine-tune playback in real time. Dynamic LED lighting can respond to music, with controls located on the bottom panel for adjusting the lighting mood. It is designed to add both sound and visual presence without requiring a separate lighting system.\u003c\/p\u003e\u003cp\u003eIts IP67-rated construction is intended for outdoor vehicle use where dust, rain, mud, and water exposure are concerns. The soundbar operates from a 9-16V DC electrical system and includes a 12-foot 10 AWG power\/ground harness. A lighter build than the prior generation helps make handling and installation more manageable.\u003c\/p\u003e\u003cp\u003eBluetooth 5.4, USB media playback, and RCA input provide several ways to connect music sources. USB has priority over Bluetooth, while Bluetooth has priority over RCA input when multiple sources are connected. For larger setups, two RALLYBAR XL2 soundbars can be paired for true stereo, or the system can connect with JBL Auracast-enabled speakers.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Class-D Amplifier:\u003c\/strong\u003e Built-in amplification simplifies system design and eliminates the need for a separate amp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e35-Inch Full-Range Array:\u003c\/strong\u003e Eight woofers, two tweeters, and passive radiators deliver broad, open-air coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 Protection:\u003c\/strong\u003e Helps protect the soundbar against dust and water exposure in recreational vehicle use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuracast Connectivity:\u003c\/strong\u003e Pair two XL2 soundbars for stereo or link compatible JBL Auracast-enabled speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAI Sound Boost:\u003c\/strong\u003e Automatically adjusts audio processing in real time during playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic LED Lighting:\u003c\/strong\u003e Beat-responsive lighting and bottom-panel controls add visual customization.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe RALLYBAR XL2 combines a 35-inch soundbar format with integrated amplification, LED lighting, and a multi-driver speaker array. Its IP67 rating supports use on exposed recreational vehicles, while the Ghost White colorway complements light-colored UTV, golf cart, and marine installations. At 16.75 pounds, it is nearly 2 kg lighter than the previous-generation RALLYBAR XL.\u003c\/p\u003e\u003cp\u003eInstall the soundbar using the included mount cleats, clamps, rubber strips, straps, and hardware as appropriate for the vehicle's mounting surface or tube diameter. Connect the included 12-foot 10 AWG harness to a compatible 9-16V DC electrical system, then select Bluetooth, USB, or RCA as the music source. RCA input supports 2V, 4V, and 6V gain settings for integration with compatible source equipment.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45846581510335,"sku":"JBLRALLYBARXL2WHT","price":734.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71fXJrgYuFL.jpg?v=1783980917"},{"product_id":"voxx-2103l","title":"Avital 2103L 1-Way Keyless Entry System with Two Remotes","description":"\u003cp\u003eThe Avital 2103L is a 1-way automotive keyless-entry system designed to add remote locking and unlocking convenience to a vehicle. It replaces the Avital 2101L and includes a control module with two 4-button transmitters. The system is intended for professional installation in automotive electrical systems.\u003c\/p\u003e\u003cp\u003eThis kit is suited to drivers who want remote door-control functions in a vehicle that does not already have them or needs an updated keyless-entry solution. Avital specifies that it can be used with virtually any vehicle, including vehicles without factory power door locks. Vehicle-specific wiring and hardware requirements should be verified by a qualified installer.\u003c\/p\u003e\u003cp\u003eIts operating character is straightforward and command-focused, using 1-way remotes for lock, unlock, panic, and auxiliary-control functions. The remotes use internal antennas and transmit LEDs to indicate when a command is being sent. Transmission range is listed at up to 1\/4 mile under suitable conditions.\u003c\/p\u003e\u003cp\u003eThe 2103L combines remote keyless entry with ignition-controlled door-lock capability and flashing parking-light confirmation. A panic\/car-locator function can activate the siren and parking lights, while temporary audible lock and unlock confirmation can be selected from the remote. Two auxiliary outputs allow compatible optional vehicle functions to be integrated by the installer.\u003c\/p\u003e\u003cp\u003eAs part of a vehicle convenience upgrade, the 2103L can provide remote access functions without adding a remote-start feature. Auxiliary output 1 can be configured for an optional function such as trunk release, while auxiliary output 2 supports another installer-configured function. The included remotes are Avital part number 7147LS replacements when additional transmitters are needed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo 4-Button Remotes:\u003c\/strong\u003e Includes two 1-way Avital 7147LS transmitters for everyday vehicle control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Keyless Entry:\u003c\/strong\u003e Lets you lock and unlock compatible vehicle doors remotely.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/4-Mile Range:\u003c\/strong\u003e Provides listed transmission range of up to 1,320 feet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanic Car Locator:\u003c\/strong\u003e Activates the siren and parking lights for attention or location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition-Controlled Locks:\u003c\/strong\u003e Supports automatic door-lock operation tied to ignition status.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Auxiliary Outputs:\u003c\/strong\u003e Allows compatible optional functions such as trunk release.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe 2103L is a compact black keyless-entry kit with a control module and two handheld 4-button transmitters. Each transmitter includes an internal antenna and a transmit LED. The listed product package measures 5 x 4 x 3 inches and weighs 0.85 pound.\u003c\/p\u003e\u003cp\u003eProfessional installation is required because the system must be integrated with the vehicle's electrical, door-lock, parking-light, and optional auxiliary circuits. An installer should confirm vehicle-specific lock configuration and determine whether additional hardware is needed for the desired functions. After installation, the owner should receive the two remotes and an Owner's Quick Reference Card.\u003c\/p\u003e","brand":"VOXX","offers":[{"title":"Default Title","offer_id":45863337427135,"sku":"2103L","price":47.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61ItGa_NBfL.jpg?v=1784236506"}],"url":"https:\/\/nsidistributor.com\/collections\/new-arrivals.oembed?page=2","provider":"NSI Audio Distributing","version":"1.0","type":"link"}