{"title":"Component Speakers","description":null,"products":[{"product_id":"stx-audio-650c-6-5-inch-2-way-car-audio-component-speakers-system-6-1-2-inches","title":"STX Audio STX-650C 6.5\" 2-Way Component Speakers","description":"\u003cp\u003eThe STX Audio STX-650C is a 6.5-inch, 2-way car audio component speaker system designed as an upgrade from factory-installed speakers. It uses separate woofers, tweeters, and crossover networks to divide the audio signal between the drivers. This format is suited to vehicles with compatible 6.5-inch door or rear-deck speaker locations and separate tweeter mounting provisions.\u003c\/p\u003e\u003cp\u003eThe system is rated at 90 watts RMS per speaker, or 180 watts RMS for the pair. Published marketplace information also lists 325 watts maximum per speaker and 650 watts maximum for the pair. Its 4-ohm impedance is commonly compatible with aftermarket multichannel amplifiers and many factory speaker circuits.\u003c\/p\u003e\u003cp\u003eThe STX-650C combines a polypropylene-based woofer design with 1-inch balanced-dome tweeters. Published listings describe an IMPP cone with a carbon-fiber finish and butyl rubber surround, while also identifying an injection-molded polypropylene woofer and treated woven-cloth surround. Because these material descriptions vary between available listings, confirm the contents and finish of the specific package before installation.\u003c\/p\u003e\u003cp\u003eA separate 2-way crossover network is included in the published product details to route appropriate frequency ranges to the woofer and tweeter. The crossover is described as having a 12 dB-per-octave roll-off and ferro-fluid cooling. Surface- and flush-mount hardware is listed for the tweeters, offering flexibility when choosing their final location.\u003c\/p\u003e\u003cp\u003eThis component set can be used with a factory head unit or paired with a multichannel amplifier as part of a larger vehicle-audio upgrade. One listing recommends an amplifier rated at least 700 watts to maximize the system, though amplifier selection should also be based on stable power output at the speakers' 4-ohm load. Match mounting dimensions, wiring routes, crossover placement, and vehicle-specific adapters before purchasing.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Component System:\u003c\/strong\u003e Separate drivers and crossovers support a more flexible installation layout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e180-Watt RMS Pair Rating:\u003c\/strong\u003e Provides a published continuous-power rating for amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Fits common aftermarket car-audio amplifier configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Dome Tweeters:\u003c\/strong\u003e Dedicated high-frequency drivers handle upper-range reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded 2-Way Crossovers:\u003c\/strong\u003e Direct frequencies to the appropriate woofer and tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Tweeter Mounting:\u003c\/strong\u003e Included hardware supports surface or flush installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003ePublished product details identify a 6.5-inch woofer with a polypropylene-based cone construction and a 1-inch balanced-dome tweeter. The system is also listed with aluminum voice coils, an 8-ounce magnet, ferro-fluid cooling, and transparent 2-way crossover housings. Marketplace descriptions differ on certain woofer-cone and surround materials, so package contents should be verified before ordering.\u003c\/p\u003e\u003cp\u003eInstall the woofers in compatible 6.5-inch speaker openings and mount the tweeters using the supplied surface- or flush-mount hardware where appropriate. Place each crossover in a protected, dry location and wire it between the amplifier or head-unit output and its corresponding woofer and tweeter. Verify vehicle fitment, polarity, mounting depth, and available space for the crossover modules before beginning installation.\u003c\/p\u003e","brand":"STX AUDIO","offers":[{"title":"Default Title","offer_id":45613581828287,"sku":"783501106265","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/818lqBWgnWL.jpg?v=1777933275"},{"product_id":"audio360-ad6525m-ultra-6-5-midrange-speaker-650w-max-power-325w-rms-dual-voice-coil-press-paper-cone-ideal-for-car-audio-systems","title":"AUDIO360 ADS6525M 6.5\" Dual Voice Coil Midrange Speaker","description":"\u003cp\u003eThe AUDIO360 ADS6525M is a 6.5-inch car-audio midrange speaker designed to bring vocal and instrumental detail into a custom vehicle sound system. It is intended for listeners building or upgrading systems that need dedicated midrange output rather than a full-range replacement speaker. Its compact 6.5-inch format supports use in many door-panel and custom-pod applications where a focused midrange driver is desired.\u003c\/p\u003e\u003cp\u003eWith 325 watts RMS power handling and 650 watts maximum power handling, the ADS6525M is made for amplified car-audio setups with appropriate power matching. The driver is positioned for clear, assertive midrange reproduction at higher listening levels. Matching amplifier output carefully to the RMS rating is the practical way to use its stated power capability.\u003c\/p\u003e\u003cp\u003eA dual voice coil design with a stated 4-ohm configuration provides wiring flexibility when planning a multi-speaker installation. This can be useful in systems where the amplifier, speaker count, and final load need to be considered together. Confirm the final wiring load with the amplifier manufacturer before installation.\u003c\/p\u003e\u003cp\u003eThe speaker uses a black press-paper cone and cloth-edge suspension. This combination is specified to keep the moving assembly lightweight while supporting controlled midrange reproduction. An oversized motor structure is also part of the driver design for its intended high-output car-audio role.\u003c\/p\u003e\u003cp\u003eA robust steel basket provides the mounting structure for the ADS6525M. The speaker is suited to door panels, custom speaker pods, and performance-oriented car-audio builds where a dedicated midrange driver is part of the system plan. Because it is a midrange speaker, system design should account for the other drivers and crossover strategy needed for the desired overall frequency coverage.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e325W RMS Handling:\u003c\/strong\u003e Supports use with a suitably matched amplified system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e650W Maximum Power:\u003c\/strong\u003e Provides a stated short-term maximum power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Midrange Format:\u003c\/strong\u003e Fits applications designed for a 6.5-inch driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Voice Coil Design:\u003c\/strong\u003e Offers flexibility when planning speaker wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress-Paper Cone:\u003c\/strong\u003e Uses a lightweight black paper-cone construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel Basket Structure:\u003c\/strong\u003e Provides a robust frame for mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ADS6525M combines a black press-paper cone, cloth-edge suspension, oversized motor structure, and steel basket. These confirmed construction elements support its role as a dedicated midrange driver in a vehicle audio system. The speaker is finished in black.\u003c\/p\u003e\u003cp\u003eVerify vehicle mounting clearance, mounting-hole dimensions, and electrical compatibility before ordering, as cutout and mounting-depth measurements are not confirmed. The speaker is described for door panels, custom pods, and competition-oriented systems; use wiring appropriate for its dual voice coil configuration and confirm the final impedance load against the amplifier's specifications. For a balanced system, plan the remaining frequency ranges with compatible drivers and suitable crossover settings.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":45692202975423,"sku":"783501184409","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71cC_WIyWzL.jpg?v=1780693937"},{"product_id":"kenwood-kfc-4675c","title":"Kenwood KFC-4675C 4\" x 6\" 2-Way Car Speakers","description":"\u003cp\u003eThe Kenwood KFC-4675C is a pair of 4 x 6-inch, 2-way car speakers designed to replace worn or limited factory speakers in compatible vehicle locations. Its compact oval format suits vehicles that use 4 x 6-inch speaker openings. The speakers use a 4-ohm nominal impedance for use with compatible car audio systems.\u003c\/p\u003e\u003cp\u003eThis model is intended for drivers seeking a straightforward factory-speaker replacement without changing to a larger speaker size. A 20-watt RMS rated input and 90 dB\/W at 1 m sensitivity make it appropriate for modest-power factory radios or carefully matched amplification. It can also be used as part of a broader speaker refresh when matching vehicle fitment is confirmed.\u003c\/p\u003e\u003cp\u003eThe 2-way design combines an injection polypropylene cone woofer with a 1-inch PEI balanced-dome high-frequency driver. The woofer handles the main range of music playback while the separate dome driver extends high-frequency reproduction. Kenwood specifies a 50 Hz to 25 kHz frequency response.\u003c\/p\u003e\u003cp\u003eA steel basket and ferrite magnet provide the speaker's core structure, while the black finish maintains a discreet installed appearance. The 4 x 6-inch woofer format is built around a compact footprint for factory-style mounting locations. Its 1-5\/8-inch mounting depth should be checked against available door, dash, or rear-deck clearance before installation.\u003c\/p\u003e\u003cp\u003eThe KFC-4675C is sold as a pair, making it suitable for replacing two factory speaker positions at once. It is a full-range speaker solution rather than a subwoofer, so low-bass output will depend on the vehicle, installation location, and the rest of the audio system. For an accurate fit, compare the vehicle's opening, mounting depth, mounting pattern, and wiring connection with the speaker dimensions before purchase.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 x 6-Inch Format:\u003c\/strong\u003e Fits compatible oval factory speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Design:\u003c\/strong\u003e Separates woofer and high-frequency driver duties.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInjection PP Woofer:\u003c\/strong\u003e Uses a polypropylene cone diaphragm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch PEI Balanced Dome:\u003c\/strong\u003e Handles high-frequency playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches many conventional car audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90 dB Sensitivity:\u003c\/strong\u003e Supports output from modest-power sources.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-4675C uses an injection polypropylene woofer cone, a 1-inch PEI balanced-dome driver, a black steel basket, and a ferrite magnet. The speaker measures 6-1\/4 inches wide by 4 inches high and 3-1\/16 inches deep without a grille. Kenwood specifies a 1-5\/8-inch mounting depth.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 4 x 6-inch speaker and has sufficient mounting depth before installation. The package is listed with two speakers, speaker-wire lengths, self-tapping screws, and speed clips; vehicle-specific brackets, adapters, or harnesses may still be needed depending on the application. Use an amplifier or receiver compatible with a 4-ohm speaker load and the 20-watt RMS rated input.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":45766406701247,"sku":"KFC-4675C","price":46.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/51-OwTyrvKL.jpg?v=1782245956"},{"product_id":"kenwood-kfc-p710ps","title":"Kenwood KFC-P710PS 6.5\" Component Speaker System","description":"\u003cp\u003eThe Kenwood KFC-P710PS is a 6-1\/2-inch component speaker system designed for vehicle audio upgrades that separate woofer and tweeter placement. It uses oversized 160 mm woofers alongside separate 1-inch tweeters and supplied in-line passive networks. This layout gives installers flexibility to position high-frequency drivers closer to the listening area while retaining dedicated woofers in the doors or other suitable locations.\u003c\/p\u003e\u003cp\u003eWith 80 watts RMS power handling and a 4-ohm nominal impedance, this set is suited to compatible aftermarket amplification or a properly matched factory-system upgrade. Its 280-watt peak power rating provides an additional short-term handling reference. The 86 dB sensitivity specification and 63 Hz to 24 kHz frequency response describe its operating range and efficiency rating.\u003c\/p\u003e\u003cp\u003eThe woofer uses an injection polypropylene cone with Kenwood's Diamond Array Pattern diaphragm design. A rubber surround, black steel basket, and ferrite woofer magnet support the driver assembly. The separate 25 mm soft-dome tweeter uses a neodymium magnet.\u003c\/p\u003e\u003cp\u003eA 4,900 Hz crossover frequency divides the signal between the woofer and tweeter through the included passive network. Using the supplied network is required by the installation instructions. This makes the KFC-P710PS a practical choice for a two-way component front-stage installation where separate tweeter mounting is desired.\u003c\/p\u003e\u003cp\u003eFitment should be confirmed before purchase, especially in vehicles with limited door-panel or window-clearance space. The woofer requires a 4-15\/16-inch cutout and 2-3\/16-inch mounting depth. Supplied grilles and multiple tweeter mounting accessories support custom, flush, free, and certain GM-style installation approaches.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6-1\/2-Inch Component System:\u003c\/strong\u003e Separate woofers and tweeters allow more flexible speaker placement than a coaxial design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80W RMS Handling:\u003c\/strong\u003e Supports amplifier matching up to the manufacturer's CEA-rated continuous power specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInjection PP Woofer Cone:\u003c\/strong\u003e The polypropylene woofer diaphragm is paired with a rubber surround and steel basket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Soft-Dome Tweeter:\u003c\/strong\u003e A separate 25 mm tweeter is included for high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive In-Line Networks:\u003c\/strong\u003e Included crossover networks direct the appropriate frequency range to each driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Tweeter Mounts:\u003c\/strong\u003e Flush, free, and GM mounting accessories provide installation options.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-P710PS combines an injection polypropylene woofer cone, rubber surround, black steel basket, and ferrite woofer magnet. Its 1-inch soft-dome tweeter uses a neodymium magnet. The woofer has an oversized 160 mm frame size, while the included grilles provide a finished appearance where exposed mounting is appropriate.\u003c\/p\u003e\u003cp\u003eConfirm the 4-15\/16-inch cutout diameter, 2-3\/16-inch mounting depth, and clearance behind the mounting surface before installation. Speaker wire is not supplied; Kenwood recommends 12-22 AWG speaker wire terminated with female spade connectors. Connect the woofer and tweeter through the supplied passive crossover network, and use the included mounting hardware and tweeter brackets as appropriate for the vehicle.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":45766487441599,"sku":"KFC-P710PS","price":77.68,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/91MjlxJkeGL_7f070f7c-6b80-4168-bc8a-5ba29016a216.jpg?v=1782247704"},{"product_id":"rockford-fosgate-r152-s","title":"Rockford Fosgate R152-S 5.25\" 2-Way Component Speakers","description":"\u003cp\u003eThe Rockford Fosgate Prime R152-S is a 5.25-inch, 2-way component speaker system designed for replacing factory vehicle speakers. It separates the woofer and tweeter so installers can place high frequencies higher in the cabin when suitable mounting locations are available. The set is intended for vehicles that use 5.25-inch speaker locations and need a compact component upgrade.\u003c\/p\u003e\u003cp\u003eEach side is rated for 40 watts RMS and 80 watts maximum power handling at a nominal 4-ohm impedance. With a 58 Hz to 20 kHz frequency response, the system covers midrange and treble duties while leaving the deepest bass to larger speakers or a subwoofer when used in a full system. Its 85 dB sensitivity supports use with compatible factory or aftermarket amplification.\u003c\/p\u003e\u003cp\u003eThe R152-S uses Mica-injected polypropylene woofer cones with foam surrounds. This material combination is paired with a stamped steel basket to provide a practical, lightweight foundation for daily-use car audio installations. The separate Mylar balanced-dome tweeters are designed to reproduce upper-frequency detail.\u003c\/p\u003e\u003cp\u003eAn in-line tweeter crossover simplifies the component-system wiring layout by filtering high frequencies for the tweeters. The specified tweeter high-pass crossover point is 12 kHz at 6 dB per octave. This approach allows the woofers and tweeters to work together without requiring a separate external crossover box.\u003c\/p\u003e\u003cp\u003eThe kit is suited to front-door or other compatible factory-replacement locations where separate tweeter placement is desired. Its 4.76-inch woofer cutout requirement and 1.91-inch woofer mounting depth should be checked against the vehicle before purchase. Grilles, tweeter mounting pieces, and installation hardware are included for a more complete installation package.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5.25-Inch Component System:\u003c\/strong\u003e Separate woofers and tweeters support flexible speaker placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40-Watt RMS Rating:\u003c\/strong\u003e Handles up to 40 watts RMS per side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMica-Injected Polypropylene Cone:\u003c\/strong\u003e Provides the woofer's cone construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMylar Balanced-Dome Tweeters:\u003c\/strong\u003e Reproduce high-frequency information with separate mounting options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn-Line Crossover:\u003c\/strong\u003e Filters the tweeter signal without a separate crossover box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Installation Parts:\u003c\/strong\u003e Includes grilles, mounts, trim rings, and mounting hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe R152-S combines Mica-injected polypropylene woofer cones, foam surrounds, and stamped steel baskets. The component set includes 13 mm Mylar balanced-dome tweeters, while the woofer uses a 1.0-inch voice coil. Grilles and trim rings are included with the system.\u003c\/p\u003e\u003cp\u003eConfirm the available mounting depth, 4.76-inch woofer cutout, and vehicle-specific speaker fitment before installation. The woofers have a 1.91-inch mounting depth, while the tweeters have a 1.06-inch mounting depth. The included tweeter hardware supports flush, surface, and angle mounting; use the in-line crossovers when wiring the tweeters.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768042545343,"sku":"R152-S","price":55.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71SlW8fDrkL.jpg?v=1782270395"},{"product_id":"rockford-fosgate-r1675s","title":"Rockford Fosgate R1675-S 6.75\" Component Speakers","description":"\u003cp\u003eThe Rockford Fosgate Prime R1675-S is a 6.75-inch, 2-way component speaker system designed as a factory-speaker replacement for compatible vehicle locations. It separates the woofer and tweeter so the tweeters can be positioned independently from the midrange drivers. This makes it a practical choice for vehicle owners replacing aging or basic factory speakers while retaining a conventional car-audio layout.\u003c\/p\u003e\u003cp\u003eEach system includes dedicated 6.75-inch woofers and separate 1-inch nominal tweeters. The woofers handle the main midrange and lower-frequency duties, while the tweeters reproduce upper frequencies through their integrated high-pass crossover design. With a 55 Hz to 20 kHz frequency response, the system is intended for full-range music playback in a properly matched vehicle installation.\u003c\/p\u003e\u003cp\u003eThe R1675-S is rated for 40 watts RMS and 80 watts maximum power handling. Its 4-ohm nominal impedance suits many aftermarket car-audio amplifiers and compatible factory or aftermarket radio systems. Use an amplifier or source unit that is appropriate for the speaker's continuous RMS rating and impedance.\u003c\/p\u003e\u003cp\u003eRockford Fosgate uses mica-injected polypropylene woofer cones with foam surrounds in this Prime component system. The woofers use stamped steel baskets, while the tweeters use Mylar balanced-dome diaphragms. These materials support a straightforward replacement-speaker design without adding unnecessary complexity to the installation.\u003c\/p\u003e\u003cp\u003eThe separate tweeters can be flush, surface, or angle mounted, giving installers options for aiming high frequencies toward the listening area. An in-line tweeter crossover simplifies the component connection layout. The R1675-S can be used as part of a front-stage upgrade and paired with compatible rear speakers, an amplifier, or a subwoofer system as desired.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Component Design:\u003c\/strong\u003e Separate woofers and tweeters allow flexible tweeter placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40W RMS Handling:\u003c\/strong\u003e Supports continuous power up to 40 watts RMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMica Polypropylene Cone:\u003c\/strong\u003e Woofer cone material supports full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMylar Dome Tweeters:\u003c\/strong\u003e Balanced-dome tweeters handle upper-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn-Line Crossover:\u003c\/strong\u003e Tweeter high-pass crossover helps simplify system wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Tweeter Mounts:\u003c\/strong\u003e Supports flush, surface, and angle mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe R1675-S combines mica-injected polypropylene woofer cones, foam surrounds, stamped steel baskets, and Mylar balanced-dome tweeters. Grilles or trim rings are included for the woofers. Its CEA-2031-compliant power handling is rated at 40 watts RMS and 80 watts maximum.\u003c\/p\u003e\u003cp\u003eConfirm vehicle fitment before installation using the 5.81-inch woofer mounting diameter and 2.00-inch woofer mounting depth. The tweeters require separate mounting consideration and have a listed mounting depth of 1.06 inches. Mounting hardware is included, and the tweeter can be installed flush, on a surface, or at an angle according to the available vehicle location.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768042610879,"sku":"R1675S","price":59.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71Hz5UCLOSL.jpg?v=1782270397"},{"product_id":"rockford-fosgate-r165-s","title":"Rockford Fosgate R165-S 6.5\" Component Speakers","description":"\u003cp\u003eThe Rockford Fosgate Prime R165-S is a 6.5-inch, 2-way component speaker system made for replacing factory door speakers with separate woofers and tweeters. It is intended for vehicle owners who want clearer front-stage sound while retaining a practical, compact installation format. The set includes a pair of woofers, a pair of tweeters, grilles, and mounting hardware.\u003c\/p\u003e\u003cp\u003eIts 40-watt RMS power rating suits many factory-radio upgrades while also leaving room for use with a modest aftermarket amplifier. The component layout places the tweeters separately from the woofers, allowing more flexible placement than a coaxial speaker. This can help direct higher frequencies toward the listening area when the vehicle has suitable tweeter locations.\u003c\/p\u003e\u003cp\u003eThe R165-S uses mica-injected polypropylene woofer cones and foam surrounds. These materials support a lightweight, rigid woofer design intended for midrange detail and everyday car-audio use. The specified frequency response is 60 Hz to 20 kHz, so a subwoofer can be added later for deeper low-frequency output.\u003c\/p\u003e\u003cp\u003eSeparate 1-inch Mylar balanced-dome tweeters handle the upper frequencies. Each tweeter includes an integrated 6 dB-per-octave high-pass crossover, eliminating the need to mount a separate crossover box. The tweeters support flush, surface, and angled surface mounting options for adaptable placement.\u003c\/p\u003e\u003cp\u003eThis system is a practical fit for factory replacement projects and entry-level component upgrades. Its 4-ohm nominal impedance and 89 dB sensitivity support compatibility with common car-audio speaker outputs. Confirm vehicle-specific cutout, depth, wiring, and mounting requirements before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Component System:\u003c\/strong\u003e Separate woofers and tweeters support flexible front-stage placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40-Watt RMS Rating:\u003c\/strong\u003e Matches moderate factory or aftermarket amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMica-Injected Polypropylene Cones:\u003c\/strong\u003e Provide a rigid, lightweight woofer diaphragm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMylar Balanced-Dome Tweeters:\u003c\/strong\u003e Handle high frequencies with separate mounting options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated High-Pass Crossover:\u003c\/strong\u003e Simplifies tweeter wiring without a separate crossover box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory-Replacement Dimensions:\u003c\/strong\u003e Compact 1.97-inch woofer mounting depth aids fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe R165-S combines mica-injected polypropylene woofer cones, foam surrounds, stamped-steel frames, and Mylar balanced-dome tweeters. Grilles or trim rings and mounting hardware are included. The woofers use standard spade terminals, while the tweeter crossover is integrated into the tweeter assembly.\u003c\/p\u003e\u003cp\u003eVerify the 5.05-inch woofer mounting cutout and 1.97-inch mounting depth against the intended vehicle location before purchase. Connect the amplifier or radio output to the woofer's primary terminals, then connect the tweeter to the woofer's secondary terminals while maintaining polarity. Run wiring before mounting, check clearance for windows and other moving door hardware, and use vehicle-specific adapters or harnesses when required.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768042643647,"sku":"R165-S","price":63.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71kLzK5w0yL.jpg?v=1782270399"},{"product_id":"rockford-fosgate-p2v2-65","title":"Rockford Fosgate P2V2-65 6.5\" Convertible Speakers","description":"\u003cp\u003eThe Rockford Fosgate P2V2-65 is a pair of 6.5-inch, 4-ohm 2-way convertible car speakers designed to replace factory speakers in compatible vehicle locations. Its removable tweeters allow the set to work as a conventional coaxial speaker system or as a separated component system. This flexibility suits vehicles with either a single door-speaker location or separate woofer and tweeter locations.\u003c\/p\u003e\u003cp\u003eIn coaxial configuration, the tweeter locks into the center of each woofer for a straightforward installation in a single speaker opening. For a component layout, the tweeters can be removed and installed in the supplied flush- or surface-mount cups. Woofer phase plugs are included for use after the tweeters are relocated.\u003c\/p\u003e\u003cp\u003eThe P2V2-65 is rated for 75 watts RMS and 150 watts peak power handling per speaker. Its 49 Hz to 25 kHz frequency response and 88 dB sensitivity rating at 1 watt\/1 meter support use with an aftermarket amplifier or a compatible factory or aftermarket radio. A 3\/4-inch Tetolon inverted-dome tweeter handles high-frequency reproduction.\u003c\/p\u003e\u003cp\u003eRockford Fosgate uses a mica-reinforced polypropylene woofer cone, Santoprene half-roll surround, vented Kapton voice-coil former, Nomex spider, and ferrite motor structure. The VAST 2.0 surround geometry increases effective radiating cone area without increasing the basket size. An overhung voice-coil design and vented former are intended to support controlled operation and heat dissipation.\u003c\/p\u003e\u003cp\u003eFor component installations, the included external passive crossover provides a 9 kHz high-pass filter at 12 dB per octave and offers 0 dB or -3 dB tweeter input options. When the tweeter remains mounted in the woofer, the internal crossover uses a 9 kHz high-pass filter at 6 dB per octave. The fit-focused frame and removable motor cover help accommodate a range of factory mounting locations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConvertible 2-Way Design:\u003c\/strong\u003e Use as coaxial speakers or separate component speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI.L.M. Tweeter Lock:\u003c\/strong\u003e Locks or unlocks tweeters from the woofer assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Rating:\u003c\/strong\u003e Matches compatible amplification for each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Passive Crossovers:\u003c\/strong\u003e Support separate-tweeter component system wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVAST 2.0 Surround:\u003c\/strong\u003e Increases effective cone area within the basket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Motor Cover:\u003c\/strong\u003e Reduces mounting depth in restricted locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P2V2-65 uses a 15% glass-fiber-reinforced PA66 composite basket, mica-reinforced polypropylene cone, Santoprene surround, linear Nomex spider, and Y35 ferrite magnet structure. Its 1.25-inch vented Kapton woofer voice-coil former and braided tinsel leads are designed for durable operation. Co-molded basket terminals and a 2-pin Micro-Fit 3.0 crossover connection help keep the installation organized.\u003c\/p\u003e\u003cp\u003eConfirm the 5.42-inch cutout requirement, 2.5-inch mounting depth, and 0.43-inch front-side clearance before purchase. Removing the motor cover reduces required mounting depth to 2.26 inches. For a separated-tweeter installation, use the included passive crossover and select either the 0 dB or -3 dB tweeter input; grilles are not included.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768045101247,"sku":"P2V2-65","price":181.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/51GdOrlzMTL.jpg?v=1782270455"},{"product_id":"rockford-fosgate-t4652-s","title":"Rockford Fosgate T4652-S 6.5\" Component Speaker System","description":"\u003cp\u003eThe Rockford Fosgate T4652-S is a 6.5-inch, two-way component speaker system designed for a more precise front-stage upgrade than typical factory coaxial speakers. It separates the woofer and tweeter so each driver can be placed where it works best in the vehicle. The kit includes two woofers, two tweeters, two external passive crossovers, grilles, and mounting hardware.\u003c\/p\u003e\u003cp\u003eThis system is suited to listeners building a detailed, amplifier-powered car audio system with a dedicated front component stage. Its 4-ohm nominal impedance and 150-watt RMS power rating make it appropriate for pairing with a properly matched aftermarket amplifier. The system is rated for 40 Hz to 30 kHz frequency response and 89 dB sensitivity at 1 watt\/1 meter.\u003c\/p\u003e\u003cp\u003eThe 6.5-inch woofers use tri-laminate Liquid Crystal Polymer fiber cones, butyl rubber VAST surrounds, and linear Nomex spiders. Rockford Fosgate's VAST design attaches the surround vertically to increase usable cone area within the mounting footprint. A die-cast aluminum FlexFit basket supports slotted mounting positions for added installation flexibility.\u003c\/p\u003e\u003cp\u003eHigh frequencies are handled by separate 1-inch Liquid Crystal Polymer ring-radiator dome tweeters with aluminum phase plugs. The tweeters use dual neodymium magnets, low-resonance chambers, and the Discreet Dual Clamp mounting system. Flush and angled surface-mount hardware is included to help position the tweeters for the vehicle and listener layout.\u003c\/p\u003e\u003cp\u003eEach set includes an external asymmetric 12 dB-per-octave Butterworth crossover network at 3 kHz. The crossover provides selectable +2 dB, 0 dB, and -2 dB tweeter levels, along with on-axis or off-axis and bi-amp settings. These adjustments help the system integrate with different tweeter locations, vehicle interiors, and amplification plans.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component Layout:\u003c\/strong\u003e Separate woofers, tweeters, and crossovers support more deliberate driver placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150-Watt RMS Handling:\u003c\/strong\u003e Matches well with a properly sized aftermarket amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLCP Fiber Woofer Cones:\u003c\/strong\u003e Provide a rigid, lightweight cone structure for controlled operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVAST Butyl Surrounds:\u003c\/strong\u003e Increase effective cone area without enlarging the basket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRing-Radiator Tweeters:\u003c\/strong\u003e LCP dome tweeters use aluminum phase plugs for high-frequency dispersion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable External Crossovers:\u003c\/strong\u003e Tweeter level, axis, and bi-amp settings enable system tuning.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe T4652-S combines die-cast aluminum woofer frames, multi-pole dual-neodymium motor structures, Inductive Damping Heat Sink technology, and fatigue-resistant linear Nomex spiders. Its woofers use tri-laminate LCP fiber cones and butyl rubber surrounds, while the separate tweeters use LCP ring-radiator domes with aluminum phase plugs. Grilles are included to protect the woofers after installation.\u003c\/p\u003e\u003cp\u003eVerify the vehicle's available woofer opening, 5.67-inch mounting cutout, and 2.79-inch mounting depth before purchase. The included FlexFit basket slots can help accommodate non-standard factory mounting patterns, while the tweeters include flush and angled surface-mount hardware. Use the supplied passive crossovers with the matched woofer and tweeter set, and select the crossover settings according to the intended tweeter location and amplifier configuration.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768047165631,"sku":"T4652-S","price":882.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/91pXD2f49_L.jpg?v=1782270507"},{"product_id":"rockford-fosgate-p3v2-25","title":"Rockford Fosgate P3V2-25 2.5\" Midrange Component Speakers","description":"\u003cp\u003eThe Rockford Fosgate P3V2-25 is a pair of 2.5-inch component midrange drivers designed for center-channel duties or use within a three-way car audio system. It is intended for vehicles that use separate tweeter, midrange, and woofer locations rather than a single full-range speaker. Each driver uses a 4-ohm nominal impedance and is rated for 75 watts RMS.\u003c\/p\u003e\u003cp\u003eThese speakers focus on the vocal and instrument range that helps connect low-frequency woofers with dedicated tweeters. Their specified 135 Hz to 15 kHz response range supports detailed midrange reproduction when installed with the supplied filtering or an appropriately configured active crossover. This makes them a practical choice for restoring or upgrading a factory three-way arrangement.\u003c\/p\u003e\u003cp\u003eThe included passive midrange networks use a 600 Hz high-pass filter and 6 kHz low-pass filter, each at 6 dB per octave. This band-pass arrangement helps direct the intended frequency range to the compact midrange drivers. An optional pass-through connection allows the internal filter to be bypassed for compatible active-system setups.\u003c\/p\u003e\u003cp\u003eRockford Fosgate includes Twist-Lock speaker adaptors to support flexible front- or rear-loading installation approaches. The package also includes 33 µF non-polarized bass-blocker capacitors, which install in-line on the positive speaker lead to attenuate frequencies small midrange drivers do not reproduce accurately. A 2.54-inch cutout requirement and compact mounting depths help with placement planning.\u003c\/p\u003e\u003cp\u003eThe P3V2-25 is best used as one part of a complete system, paired with separate tweeters and midbass woofers. It includes the wiring extensions, passive crossovers, adaptors, template, terminals, and mounting hardware needed for the midrange installation. Grilles and trim rings are not included.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated 2.5-Inch Midrange Drivers:\u003c\/strong\u003e Supports center-channel or three-way component-system installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75-Watt RMS Rating:\u003c\/strong\u003e Handles up to 75 watts RMS per speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Nominal Impedance:\u003c\/strong\u003e Matches common aftermarket car-audio amplifier and crossover configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Band-Pass Crossovers:\u003c\/strong\u003e Filters midrange frequencies from 600 Hz to 6 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwist-Lock Adaptors:\u003c\/strong\u003e Supports front- or rear-loading mounting configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Bass Blockers:\u003c\/strong\u003e Helps reduce low frequencies sent to the midrange drivers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P3V2-25 uses compact 2.5-inch midrange drivers with mica-reinforced polypropylene cones and Santoprene rubber surrounds. Each driver has a 1-inch midrange voice coil, while the supplied component package adds passive crossover networks, extension cables, and Twist-Lock adaptors. The speakers do not include grilles or trim rings.\u003c\/p\u003e\u003cp\u003eConfirm a 2.54-inch cutout and sufficient clearance before installation. With the supplied Twist-Lock adaptor, rear-loading depth is 1.47 inches and front-loading depth is 1.60 inches; front-side clearance is 0.26 inches. Use the supplied crossover network for passive operation, or use its pass-through option only with a properly configured active crossover system.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768056078527,"sku":"P3V2-25","price":135.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61P1tgaSyuL.jpg?v=1782270675"},{"product_id":"rockford-fosgate-p3v2-65","title":"Rockford Fosgate P3V2-65 6.5\" 3-Way Component Speakers","description":"\u003cp\u003eThe Rockford Fosgate P3V2-65 is a 6.5-inch, 3-way component speaker system designed for vehicles with separate woofer, midrange, and tweeter locations. It replaces a factory multi-driver arrangement with matched 6.5-inch woofers, 2.5-inch midranges, and 3\/4-inch tweeters. The system is intended for listeners who want a more detailed front-stage upgrade than a conventional coaxial speaker can provide.\u003c\/p\u003e\u003cp\u003eSeparating the three frequency ranges lets each driver handle a focused part of the audible spectrum. The woofers cover the lower range, the dedicated midranges reproduce vocal and instrument detail, and the tweeters handle upper-frequency information. Rockford Fosgate rates the system at 75 watts RMS and 150 watts peak power handling.\u003c\/p\u003e\u003cp\u003eThe P3V2-65 has a 4-ohm nominal impedance and a stated frequency response of 49 Hz to 25 kHz. Its 87 dB sensitivity rating at 1 watt\/1 meter supports use with a compatible aftermarket amplifier or suitable factory-replacement system. The set includes passive crossover networks to direct the appropriate frequencies to each driver.\u003c\/p\u003e\u003cp\u003eIts modular crossover design can be assembled as a combined network or mounted as separate sections when installation space is limited. The tweeter crossover provides a selectable 0 dB or -3 dB tweeter level, allowing a less forward high-frequency balance when preferred. Pass-through connections support standard wiring as well as bi-amplified or tri-amplified system layouts.\u003c\/p\u003e\u003cp\u003eThe system is built for custom or factory-location installations that have room for separate drivers. A removable woofer motor cover reduces woofer mounting depth from 2.50 inches to 2.26 inches when clearance is tight. Included twist-lock midrange adapters, tweeter mounting cups, crossover extensions, hardware, and templates help support a planned installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Component Design:\u003c\/strong\u003e Separate woofer, midrange, and tweeter drivers divide the audio range between dedicated transducers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Power Handling:\u003c\/strong\u003e Supports amplification matched to the manufacturer’s continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular Passive Crossovers:\u003c\/strong\u003e Networks can be joined together or installed separately to suit available space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Level Selection:\u003c\/strong\u003e Choose 0 dB or -3 dB tweeter attenuation for system balance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Motor Cover:\u003c\/strong\u003e Reduces woofer mounting depth where door clearance is limited.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Mounting Accessories:\u003c\/strong\u003e Includes midrange adapters and flush- and surface-mount tweeter cups.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P3V2-65 uses separate 6.5-inch woofers, 2.5-inch midranges, and 3\/4-inch inverted-dome tweeters, with passive crossover sections for each driver type. The woofer design incorporates a removable motor cover, while the crossover sections use Molex Micro-Fit 3.0 connectors and a snap-fit arrangement for modular assembly. Woofer grilles are not included and are sold separately.\u003c\/p\u003e\u003cp\u003eConfirm vehicle mounting locations and clearances before installation: the woofer cutout requirement is 5.42 inches, and standard woofer mounting depth is 2.50 inches. Run wiring before mounting drivers, maintain correct polarity, and use the included crossover networks for a conventional passive installation. For active installations, the manufacturer provides starting crossover points for the woofer, midrange, and tweeter; professional installation is recommended when configuring multi-amplifier systems.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768056144063,"sku":"P3V2-65","price":340.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/51gkKX5Km7L.jpg?v=1782270676"},{"product_id":"rockford-fosgate-p3v2-69","title":"Rockford Fosgate P3V2-69 6x9\" 3-Way Component Speakers","description":"\u003cp\u003eThe Rockford Fosgate P3V2-69 is a 6x9-inch, 3-way component speaker system designed for vehicles that use separate woofer, midrange, and tweeter locations. It combines dedicated 6x9-inch woofers, 2.5-inch midrange drivers, and 3\/4-inch tweeters to cover the full frequency range through separate drivers. This makes it a practical upgrade for vehicles with factory multi-speaker front-stage layouts.\u003c\/p\u003e\u003cp\u003eThis system is intended for listeners who want more defined vocals and instruments than a conventional coaxial speaker arrangement can provide. Its 49 Hz to 25 kHz frequency response, 4-ohm nominal impedance, and 89 dB sensitivity support a balanced, detailed presentation. The system is rated for 75 watts RMS and 150 watts peak power handling.\u003c\/p\u003e\u003cp\u003eEach side uses an external passive crossover network to direct appropriate frequencies to the woofer, midrange, and tweeter. The modular Multi-Configuration Crossover Chassis can be joined together or mounted as individual crossover modules when installation space is limited. Pass-through connections also support standard, bi-amplified, or tri-amplified system layouts.\u003c\/p\u003e\u003cp\u003eThe P3V2-69 uses a 6x9-inch woofer with a mica-reinforced polypropylene curvilinear cone and Santoprene half-roll surround. Rockford Fosgate's VAST 2.0 surround design increases effective cone area compared with conventional speaker designs. The included 3\/4-inch Tetolon inverted-dome tweeters offer separate flush-mount and surface-mount installation options.\u003c\/p\u003e\u003cp\u003eThis kit is well suited to a properly planned factory-location upgrade where the vehicle can accommodate separate drivers and crossover modules. It includes 6x9-inch woofers, 2.5-inch midranges, tweeters, crossover networks, midrange adapters, wiring extensions, and mounting hardware. Verify vehicle cutout dimensions, mounting depth, window clearance, and available crossover mounting space before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Component Layout:\u003c\/strong\u003e Dedicated woofer, midrange, and tweeter drivers divide sound reproduction across separate frequency ranges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75-Watt RMS Rating:\u003c\/strong\u003e Supports amplifier matching for clean, controlled output at its rated power level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular Passive Crossovers:\u003c\/strong\u003e Separate crossover sections can be combined or installed individually to suit available space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Level Selection:\u003c\/strong\u003e A 0 dB or -3 dB tweeter input helps tailor high-frequency balance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVAST 2.0 Surround Design:\u003c\/strong\u003e Increases usable cone area for greater radiating surface from the woofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Mounting Accessories:\u003c\/strong\u003e Templates, adapters, tweeter cups, wiring, connectors, and hardware support installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe system uses 6x9-inch woofers with mica-reinforced polypropylene curvilinear cones and Santoprene half-roll surrounds, plus 3\/4-inch Tetolon inverted-dome tweeters. The woofers have removable motor covers, allowing reduced mounting depth where rear clearance is limited. Twist-Lock adapters are included for the 2.5-inch midrange drivers, and both flush-mount and surface-mount cups are included for the tweeters.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle has suitable locations for a 6x9-inch woofer, 2.5-inch midrange, and 3\/4-inch tweeter before purchase. The 6x9-inch woofer requires an 8.41 by 5.71-inch cutout and 3.13 inches of mounting depth with its motor cover installed; check door-window travel and other obstructions before mounting. Use the supplied passive crossover networks for a standard passive installation, or follow the manufacturer's active-system crossover guidance when using external electronic crossovers and dedicated amplifier channels.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768056176831,"sku":"P3V2-69","price":351.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/51wiIZRyuKL.jpg?v=1782270678"},{"product_id":"rockford-fosgate-p3v2-69c2","title":"Rockford Fosgate P3V2-69C2 6x9\" 3-Way Speaker System","description":"\u003cp\u003eThe Rockford Fosgate P3V2-69C2 is a 6x9-inch, 4-ohm 3-way coaxial\/component speaker system designed for vehicles with separate locations for a larger woofer and a smaller coaxial speaker. It combines dedicated 6x9-inch woofers with 2.5-inch coaxial speakers to replace multi-location factory speaker arrangements. The system is intended for an OEM-style upgrade where preserving separate speaker positions is important.\u003c\/p\u003e\u003cp\u003eThis package suits drivers updating a factory system that uses 6x9-inch lower speakers and separate small upper speakers. Each set includes two 6x9-inch speakers, two 2.5-inch coaxial speakers, woofer crossover networks, bass blockers, adapters, and installation hardware. The 4-ohm design is compatible with common aftermarket car-audio amplifiers and factory-replacement speaker applications when fitment and power are verified.\u003c\/p\u003e\u003cp\u003eRated for 75 watts RMS and 150 watts peak power handling, the P3V2-69C2 is built for clear, controlled playback across a stated 49 Hz to 25 kHz frequency range. The 6x9-inch woofers handle the lower range while the 2.5-inch coaxial speakers cover midrange and high-frequency duties. Its 89 dB sensitivity rating at 1 watt\/1 meter supports solid output with appropriately matched power.\u003c\/p\u003e\u003cp\u003eRockford Fosgate uses modular passive crossover sections to support flexible routing and installation. The woofer low-pass network is rated at 1.2 kHz at 6 dB per octave, while the system also includes 33 µF non-polarized bass blockers. The coaxial section incorporates a 3\/4-inch Tetolon inverted-dome tweeter along with an additional 3\/8-inch tweeter element.\u003c\/p\u003e\u003cp\u003eFor physical integration, the 6x9-inch woofer has a removable motor cover and a listed mounting depth of 3.13 inches with the cover installed. The included 2.5-inch Twist-Lock adapters support front- or rear-loading installation options for the smaller coaxial speakers. This makes the P3V2-69C2 a practical choice for a multi-speaker factory-location upgrade, provided the vehicle has the required mounting locations and clearance.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial\/Component Layout:\u003c\/strong\u003e Combines 6x9-inch woofers with 2.5-inch coaxial speakers for separate factory speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching up to its 75-watt RMS rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Nominal Impedance:\u003c\/strong\u003e Works with many common car-audio speaker outputs and amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular Crossover Networks:\u003c\/strong\u003e Allows the woofer crossover sections to be mounted together or separately as space permits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Motor Cover:\u003c\/strong\u003e Reduces woofer mounting depth when additional rear clearance is needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Installation Components:\u003c\/strong\u003e Supplies adapters, templates, wiring extensions, connectors, bass blockers, and mounting hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe 6x9-inch woofer uses a mica-reinforced polypropylene curvilinear cone, Santoprene half-roll surround, Nomex spider, and glass-fiber-reinforced PA66 composite basket. Its motor assembly uses a vented Kapton voice-coil former, overhung voice coil, and Y35 ferrite motor structure. The 2.5-inch coaxial speakers incorporate a 3\/4-inch Tetolon inverted-dome tweeter arrangement for the high-frequency portion of the system.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's speaker locations, cutout dimensions, mounting depth, and front-side clearance before installation. Use the supplied 2.5-inch Twist-Lock adapters where appropriate, route the supplied crossover wiring extensions securely, and observe speaker polarity throughout the installation. For an amplified active setup, Rockford Fosgate lists 400 Hz high-pass filtering for the 2.5-inch coaxials and an 80-400 Hz band-pass range for the 6x9-inch woofers, using 18 or 24 dB-per-octave slopes as starting points.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768056275135,"sku":"P3V2-69C2","price":286.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/51BaVYZaCbL.jpg?v=1782270680"},{"product_id":"rockford-fosgate-p3v2-69c3","title":"Rockford Fosgate P3V2-69C3 6x9-Inch 3-Way Component System","description":"\u003cp\u003eThe Rockford Fosgate P3V2-69C3 is a 6x9-inch, 3-way coaxial\/component speaker system designed for vehicles that use separate larger woofers and compact dash or upper-door speakers. It combines a pair of 6x9-inch woofers with a pair of 3.5-inch 3-way coaxial speakers to replace multiple factory drivers as one matched system. This approach helps address the limited bass output and reduced high-frequency detail common with basic OEM speaker arrangements.\u003c\/p\u003e\u003cp\u003eThis system is intended for shoppers upgrading compatible factory door and dash locations while retaining an OEM-oriented installation layout. The included 3.5-inch twist-lock adapters support several mounting-tab configurations, but vehicle fitment must still be verified before purchase. Its 4-ohm nominal impedance makes it suited to compatible aftermarket amplifiers and many conventional car-audio installations.\u003c\/p\u003e\u003cp\u003eThe P3V2-69C3 is rated for 75 watts RMS and 150 watts peak power handling, with a published system frequency response of 49 Hz to 25 kHz. The 6x9-inch woofers handle the lower range while the 3.5-inch coaxial speakers add midrange and high-frequency reproduction. The result is a system built to provide more complete coverage than a single pair of coaxial speakers in the same vehicle locations.\u003c\/p\u003e\u003cp\u003eIts woofers use mica-reinforced polypropylene cones, Santoprene rubber surrounds, Nomex spiders, and ferrite motor structures. Rockford Fosgate's VAST 2.0 surround design increases effective cone area, while the removable woofer motor cover can help with clearance in tighter installations. The 3.5-inch coaxial speakers incorporate a 3\/4-inch Tetolon inverted-dome tweeter and a 3\/8-inch polypropylene piezo super tweeter.\u003c\/p\u003e\u003cp\u003eThe supplied passive woofer networks and non-polarized bass blockers divide the system so the smaller coaxial speakers are protected from lower-frequency content. Modular crossover connections allow the woofer crossover sections to be mounted together or separately when installation space is limited. For a complete upgrade, pair the system with appropriate wiring, secure mounting, and amplification or a receiver that can operate safely with 4-ohm speakers.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue 3-Way Layout:\u003c\/strong\u003e Combines 6x9-inch woofers with 3.5-inch coaxial speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75-Watt RMS Rating:\u003c\/strong\u003e Supports properly matched amplified car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVAST 2.0 Surround:\u003c\/strong\u003e Increases usable woofer cone area for output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular Woofer Crossovers:\u003c\/strong\u003e Allows flexible crossover placement during installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwist-Lock Adapters:\u003c\/strong\u003e Supports several 3.5-inch OEM-style mounting arrangements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Motor Covers:\u003c\/strong\u003e Helps the 6x9-inch woofers fit tighter locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe 6x9-inch woofers use mica-reinforced polypropylene cones, Santoprene rubber surrounds, linear Nomex spiders, and glass-fiber-reinforced composite baskets. A Y35 ferrite magnet motor structure and vented Kapton voice-coil former support the woofer assembly, while the 3.5-inch coaxial drivers use a Tetolon inverted-dome tweeter and polypropylene piezo super tweeter. Grilles and trim rings are not included.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's speaker locations, cutout dimensions, mounting depth, and window or mechanism clearance before installation. The woofer cutout is 8.41 by 5.71 inches, and the standard woofer mounting depth is 3.13 inches; the 3.5-inch coaxial speakers use included twist-lock adapters for front- or rear-loading arrangements. Install the supplied bass blockers inline with the positive lead for the 3.5-inch speakers, observe speaker polarity, and mount the passive woofer crossovers securely.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768056438975,"sku":"P3V2-69C3","price":286.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/51TjIyMhU7L.jpg?v=1782270682"},{"product_id":"rockford-fosgate-p2v2-65ho","title":"Rockford Fosgate P2V2-65HO 6.5\" 2-Way Convertible Speakers","description":"\u003cp\u003eThe Rockford Fosgate P2V2-65HO is a pair of 6.5-inch, 2-way convertible car speakers designed for vehicles that need either a traditional coaxial replacement or a separate-tweeter component layout. Its removable tweeters let the same set adapt to a single factory door location or to systems with dash or A-pillar tweeter positions. This flexibility helps simplify an upgrade when the vehicle’s original speaker arrangement varies by trim level.\u003c\/p\u003e\u003cp\u003eEach speaker uses a 2-ohm high-output design and is rated for 75 watts RMS and 150 watts peak power. The system covers a stated 49 Hz to 25 kHz frequency range, pairing midbass capability with a dedicated 3\/4-inch inverted-dome tweeter. It is suited to listeners who want a more capable front-stage upgrade while retaining the option to use factory-style locations.\u003c\/p\u003e\u003cp\u003eRockford Fosgate’s I.L.M. Interchangeable Locking Mechanism allows the tweeter to lock into the woofer for coaxial operation or be removed for component-style installation. When the tweeter is relocated, the included woofer phase plug installs in its place. This approach keeps the woofer assembly configured correctly in either setup.\u003c\/p\u003e\u003cp\u003eThe P2V2-65HO combines a mica-reinforced polypropylene cone, Santoprene half-roll surround, linear Nomex spider, and a glass-fiber-reinforced PA66 composite basket. Its vented Kapton voice-coil former and Y35 ferrite motor structure are engineered for thermal management and controlled operation. A removable motor cover also helps when rear mounting clearance is limited.\u003c\/p\u003e\u003cp\u003eFor component-style use, the package includes external passive crossover networks with a 9 kHz, 12 dB-per-octave high-pass filter and selectable 0 dB or -3 dB tweeter input. The tweeters can be installed in the included flush- or surface-mount cups, while coaxial use keeps installation concentrated at the woofer location. Mounting hardware and a cutout template are included, but speaker grilles are sold separately.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConvertible Configuration:\u003c\/strong\u003e Use as coaxial speakers or separate-tweeter components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm High Output:\u003c\/strong\u003e Designed for compatible 2-ohm vehicle audio applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI.L.M. Tweeter Lock:\u003c\/strong\u003e Secures or releases the tweeter from the woofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Passive Crossovers:\u003c\/strong\u003e Support separate tweeter installation with selectable attenuation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Woofer Construction:\u003c\/strong\u003e Reinforced cone, surround, spider, and composite basket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Motor Cover:\u003c\/strong\u003e Helps accommodate tighter mounting-depth applications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P2V2-65HO uses a 20–40% mica-reinforced polypropylene curvilinear cone, Santoprene half-roll surround, linear Nomex spider, braided tinsel leads, and a 15% glass-fiber-reinforced PA66 basket. The high-strength Y35 ferrite motor is paired with an overhung voice coil and vented Kapton former. Copper spring contacts in the tweeter cups support front-side tweeter servicing, and the motor cover can be removed where depth is restricted.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle’s available mounting space before purchase: the stated speaker cutout diameter is 5.42 inches, mounting depth is 2.50 inches with the motor cover or 2.26 inches without it, and front clearance is 0.43 inch. For coaxial use, retain the tweeter in the woofer; for a component layout, remove the tweeter, install the supplied phase plug, and use the included external passive crossover. Check amplifier or factory-system compatibility with the speakers’ 2-ohm nominal impedance, and note that grilles are not included.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768056504511,"sku":"P2V2-65HO","price":232.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/51GdOrlzMTL_9dd1b216-8867-4846-a851-3fde4ceb6efd.jpg?v=1782270683"},{"product_id":"rockford-fosgate-p2v2-68ho","title":"Rockford Fosgate P2V2-68HO 6x8\" Convertible Speakers","description":"\u003cp\u003eThe Rockford Fosgate P2V2-68HO is a pair of 6x8-inch, 2-ohm two-way convertible car speakers designed for factory-location upgrades and custom installations. Its removable tweeters allow the system to be configured as a conventional coaxial speaker pair or as a separated component setup. This flexibility helps accommodate vehicles with either a single door speaker location or separate factory tweeter locations.\u003c\/p\u003e\u003cp\u003eEach side is rated for 75 watts RMS and 150 watts peak, making this set appropriate for use with a compatible aftermarket amplifier or a 2-ohm-capable factory system. The 2-ohm High Output design is intended to support strong output from compatible systems. Frequency response is rated from 45 Hz to 25 kHz, covering midbass through high-frequency detail.\u003c\/p\u003e\u003cp\u003eThe P2V2-68HO uses Rockford Fosgate's Interchangeable Locking Mechanism to secure the tweeter in the woofer for coaxial use or release it for component placement. When the tweeter is relocated, the included phase plug installs in the woofer center. This allows installers to use the same speaker set for a simpler replacement or a more focused front-stage layout.\u003c\/p\u003e\u003cp\u003eA 3\/4-inch Tetolon inverted-dome tweeter handles high frequencies, while the woofer uses a mica-reinforced polypropylene cone and Santoprene rubber surround. VAST 2.0 technology increases effective cone area for the speaker size. The system also uses a vented Kapton voice-coil former, Nomex spider, and ferrite motor structure.\u003c\/p\u003e\u003cp\u003eFor component use, the included external passive crossover provides a 9 kHz high-pass filter and selectable 0 dB or -3 dB tweeter attenuation. The speaker also has an internal 6 dB\/octave tweeter crossover for coaxial configuration. Mounting hardware, crossover networks, tweeter cups, wiring accessories, and a cutout template are included, while speaker grilles are not included.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConvertible Configuration:\u003c\/strong\u003e Use as coaxials or separate component speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm High Output:\u003c\/strong\u003e Designed for compatible high-output factory and aftermarket systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Tweeters:\u003c\/strong\u003e Place highs at the woofer or separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVAST 2.0 Cone Design:\u003c\/strong\u003e Increases effective cone area for output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Passive Crossovers:\u003c\/strong\u003e Provide tweeter filtering and attenuation selection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto Fit Architecture:\u003c\/strong\u003e Uses updated mounting features for vehicle integration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P2V2-68HO combines a 15% glass-fiber-reinforced PA66 composite basket, curvilinear mica-reinforced polypropylene cone, chemically bonded Santoprene half-roll surround, and fatigue-resistant Nomex spider. Its 1.25-inch vented Kapton voice coil and Y35 ferrite motor support thermal management and controlled operation. A removable motor cover helps reduce required mounting depth where space is limited.\u003c\/p\u003e\u003cp\u003eVerify the vehicle's 6x8-inch mounting location, 7.19 x 5.18-inch cutout requirement, and available depth before installation. Standard mounting depth is 2.61 inches, or 2.37 inches with the motor cover removed. For separated-tweeter installations, install the included phase plug in each woofer and use the included external passive crossover; confirm that the connected radio or amplifier is compatible with a 2-ohm speaker load.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768056570047,"sku":"P2V2-68HO","price":232.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/51QvQaV4rUL.jpg?v=1782270685"},{"product_id":"rockford-fosgate-p2v2-69ho","title":"Rockford Fosgate P2V2-69HO 6x9\" Convertible Speakers","description":"\u003cp\u003eThe Rockford Fosgate P2V2-69HO is a pair of 6x9-inch, 2-way convertible car speakers designed for vehicles that use a 2-ohm factory speaker load. It provides an upgrade path for systems that need stronger output while retaining flexible installation options. The pair can be configured as coaxial speakers or as a component-style system with separately mounted tweeters.\u003c\/p\u003e\u003cp\u003eThis design is well suited to vehicles with a single 6x9-inch speaker location as well as vehicles with dedicated dash or A-pillar tweeter locations. With the tweeters locked into the woofers, the system functions as a conventional coaxial setup. When the tweeters are removed and installed separately, the system can support improved front-stage placement.\u003c\/p\u003e\u003cp\u003eEach speaker is rated for 75 watts RMS and 150 watts peak power handling, with a 2-ohm nominal impedance. The 45 Hz to 25 kHz frequency response covers midbass through high-frequency detail. A 90 dB sensitivity rating at 1 watt\/1 meter supports efficient output from a compatible audio system.\u003c\/p\u003e\u003cp\u003eRockford Fosgate uses its I.L.M. Interchangeable Locking Mechanism to let the tweeter lock into or release from the woofer-mounted cup. The system includes an internal high-pass crossover for coaxial use and external passive crossover networks for separated-tweeter installation. External crossover settings provide 0 dB or -3 dB tweeter attenuation for system tuning.\u003c\/p\u003e\u003cp\u003eThe P2V2-69HO uses a mica-reinforced polypropylene curvilinear cone, Santoprene half-roll surround, and a glass-fiber-reinforced composite basket. Its removable motor cover helps reduce required mounting depth in space-constrained locations. It is a practical choice for a compatible 2-ohm OEM replacement or a custom front-speaker upgrade where fitment and wiring are verified first.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConvertible Configuration:\u003c\/strong\u003e Lock the tweeter in place for coaxial use or remove it for component-style installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm High Output:\u003c\/strong\u003e Designed for compatible factory-replacement and upgraded car-audio applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75-Watt RMS Rating:\u003c\/strong\u003e Handles 75 watts RMS per speaker for amplifier-matched systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon Inverted-Dome Tweeter:\u003c\/strong\u003e Provides dedicated high-frequency reproduction with flexible mounting options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal And External Crossovers:\u003c\/strong\u003e Supports either integrated-tweeter or separately mounted-tweeter configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Motor Cover:\u003c\/strong\u003e Helps accommodate installations with limited mounting depth.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P2V2-69HO combines a 20-40% mica-reinforced polypropylene curvilinear cone with a Santoprene half-roll surround and a 15% glass-fiber-reinforced PA66 composite basket. The surround is chemically bonded to the cone body, while the speaker uses a linear Nomex spider, braided tinsel leads, an overhung voice coil, and a Y35 ferrite motor structure. A vented Kapton voice-coil former is used to support heat dissipation.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's 6x9-inch mounting location, 8.41 x 5.71-inch cutout requirement, available depth, and 2-ohm system compatibility before installation. Standard mounting depth is 3.13 inches, while removing the motor cover reduces minimum mounting depth to 2.55 inches. Use the included phase plugs when relocating the tweeters, install the supplied passive crossovers for external-tweeter use, and note that grilles are not included.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768056602815,"sku":"P2V2-69HO","price":188.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/51sNyWqI2UL.jpg?v=1782270687"},{"product_id":"rockford-fosgate-p2v2-675","title":"Rockford Fosgate P2V2-675 6.75\" Convertible Speakers","description":"\u003cp\u003eThe Rockford Fosgate P2V2-675 is a pair of 6.75-inch, 4-ohm two-way convertible car speakers designed for factory-system replacement and custom audio upgrades. Its detachable tweeter design lets the same set serve as a conventional coaxial speaker or as a separated component system. This flexibility is useful for vehicles with either a single full-range door location or separate woofer and tweeter locations.\u003c\/p\u003e\u003cp\u003eIn coaxial configuration, the tweeter mounts with the woofer for a streamlined installation in a single speaker opening. When the tweeter is removed and installed separately, the system can place high frequencies higher in the cabin, such as in a dash or A-pillar location. The included passive crossover networks support the separated-tweeter configuration.\u003c\/p\u003e\u003cp\u003eEach speaker is rated for 75 watts RMS and 150 watts peak, with a 4-ohm nominal impedance. The system has a 49 Hz to 25 kHz frequency response and 88 dB sensitivity measured at 1W\/1m. These ratings make it suitable for use with a compatible aftermarket amplifier or a properly matched factory or aftermarket head unit.\u003c\/p\u003e\u003cp\u003eThe P2V2-675 uses Rockford Fosgate's I.L.M. Interchangeable Locking Mechanism to secure or release the tweeter from the woofer assembly. VAST 2.0 surround construction increases usable cone area compared with conventional surround placement. An inverted Tetolon dome tweeter and mica-reinforced polypropylene woofer cone are used for the system's high- and midrange-frequency reproduction.\u003c\/p\u003e\u003cp\u003eFor installation flexibility, the speaker has a removable motor cover that reduces the minimum mounting-depth requirement in tight locations. The package includes tweeter mounting cups, crossover networks, wiring accessories, hardware, and a speaker cutout template. Grilles and trim rings are not included, so they should be selected separately if required by the installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConvertible Configuration:\u003c\/strong\u003e Lock the tweeter in place for coaxial use or remove it for component-system installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI.L.M. Tweeter Mechanism:\u003c\/strong\u003e The interchangeable locking system secures the tweeter to the woofer when desired.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Power Handling:\u003c\/strong\u003e Supports 75 watts RMS and 150 watts peak per speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVAST 2.0 Surround Design:\u003c\/strong\u003e Increases effective cone area for stronger output from the available mounting space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Tweeter Level:\u003c\/strong\u003e External crossover settings provide 0 dB or -3 dB tweeter attenuation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eServiceable Fitment Design:\u003c\/strong\u003e A removable motor cover helps accommodate shallow or restricted mounting locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P2V2-675 uses a 15% glass-fiber-reinforced PA66 composite basket, a chemically bonded mica-reinforced polypropylene cone, and a Santoprene half-roll surround. Its linear Nomex spider and stitched braided tinsel leads are designed for repeated cone movement. The 3\/4-inch Tetolon inverted dome tweeter can be mounted in the supplied flush-mount or surface-mount cups when used separately.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's mounting opening, depth, front clearance, and factory wiring arrangement before installation. The speaker requires a 5.51-inch cutout diameter, 2.48 inches of mounting depth with the motor cover fitted, and 0.43 inch of front-side clearance. Use the internal crossover when the tweeter remains attached, or install the supplied external crossover network when the tweeter is mounted separately.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768056733887,"sku":"P2V2-675","price":172.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/51ssrIAhzmL.jpg?v=1782270689"},{"product_id":"rockford-fosgate-p2v2-68","title":"Rockford Fosgate P2V2-68 6x8\" 2-Way Convertible Speakers","description":"\u003cp\u003eThe Rockford Fosgate P2V2-68 is a pair of 6x8-inch, 4-ohm convertible car speakers designed for vehicles that need a flexible upgrade from factory sound. Each speaker can be used with its tweeter installed for a conventional coaxial layout, or with the tweeter removed for a separated component-style installation. This gives installers a practical option for vehicles with either one speaker location or dedicated woofer and tweeter locations.\u003c\/p\u003e\u003cp\u003eRated for 75 watts RMS and 150 watts peak per speaker, the P2V2-68 is suited to amplified systems as well as carefully matched factory-replacement upgrades. Its 45 Hz to 25 kHz frequency response covers bass, midrange, and high-frequency duties from a single 6x8-inch speaker position. The 89 dB sensitivity rating supports useful output with appropriately matched power.\u003c\/p\u003e\u003cp\u003eThe convertible design is built around Rockford Fosgate's Interchangeable Locking Mechanism, which allows the 3\/4-inch tweeter to lock into or release from the woofer assembly. In coaxial mode, the speaker is a straightforward drop-in solution for a single factory opening. In component mode, the separately mounted tweeter can be placed higher in the vehicle to support a more focused front soundstage.\u003c\/p\u003e\u003cp\u003eA 20–40% mica-reinforced polypropylene curvilinear woofer cone and Santoprene half-roll surround provide the moving assembly with rigidity and durability. The 3\/4-inch Tetolon inverted-dome tweeter is paired with a passive crossover when mounted separately. The included crossover offers standard 0 dB tweeter output or an optional -3 dB attenuation setting.\u003c\/p\u003e\u003cp\u003eThe P2V2-68 also uses a fit-focused frame design, removable motor cover, and supplied cutout template to help accommodate modern vehicle locations. It includes the main speakers, separate tweeters, crossovers, tweeter mounting cups, wiring accessories, and installation hardware. Grilles are not included, so factory panels or separately purchased grilles may be needed where the speaker faces are exposed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConvertible 2-Way Design:\u003c\/strong\u003e Use the tweeters installed in the woofers or mount them separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI.L.M. Tweeter Lock:\u003c\/strong\u003e Enables secure removal and reinstallation of each tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Per Speaker:\u003c\/strong\u003e Supports properly matched aftermarket amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMica-Reinforced Polypropylene Cone:\u003c\/strong\u003e Adds stiffness for controlled midbass and midrange response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Passive Crossovers:\u003c\/strong\u003e Required for separated-tweeter installation and included with the set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit-Focused Frame:\u003c\/strong\u003e Uses a removable motor cover and 6x8-inch mounting format.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P2V2-68 combines a 20–40% mica-reinforced polypropylene curvilinear cone with a Santoprene half-roll surround, ferrite magnet, and 1.25-inch woofer voice coil. Its 3\/4-inch Tetolon inverted-dome tweeter can remain integrated with the woofer or be moved to a separate location using the included flush- or surface-mount cups. Two woofer phase plugs are included for use after the tweeters are removed from the woofer assemblies.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's available cutout, mounting depth, and front clearance before installation; the required cutout is 7.19 by 5.18 inches and standard mounting depth is 2.61 inches. For a coaxial setup, retain the tweeters in the woofers and wire the speakers conventionally. For a component setup, install the tweeters in the supplied cups and connect the included passive crossover to the woofer's dedicated crossover output, selecting either the 0 dB or -3 dB tweeter input as appropriate.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768056799423,"sku":"P2V2-68","price":172.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/51QvQaV4rUL_6a8ea21d-7c9e-4662-8860-b0501230c6e4.jpg?v=1782270691"},{"product_id":"rockford-fosgate-p2v2-69","title":"Rockford Fosgate P2V2-69 6x9\" 2-Way Convertible Speakers","description":"\u003cp\u003eThe Rockford Fosgate P2V2-69 is a pair of 6x9-inch, 4-ohm convertible car speakers designed for upgrades where fitment and system flexibility both matter. Its removable tweeters allow the set to work as a conventional coaxial speaker or as a separated two-way component system. This gives installers a practical way to retain a factory-style speaker location or move the tweeters higher in the vehicle for a different presentation.\u003c\/p\u003e\u003cp\u003eThese speakers suit vehicles with a single 6x9-inch speaker location as well as vehicles that provide separate dash, sail-panel, or A-pillar tweeter locations. In coaxial configuration, the tweeter remains mounted in the woofer for a straightforward installation. In component configuration, the tweeter is removed and installed in an included flush- or surface-mount cup.\u003c\/p\u003e\u003cp\u003eThe P2V2-69 is rated for 75 watts RMS and 150 watts peak per speaker, with a 45 Hz to 25 kHz frequency response. Its 90 dB sensitivity rating at 1W\/1m supports useful output from a compatible aftermarket amplifier or suitable factory-replacement system. The 6x9-inch format provides broad midbass capability while the separate 3\/4-inch tweeter handles high-frequency detail.\u003c\/p\u003e\u003cp\u003eRockford Fosgate uses its Interchangeable Locking Mechanism to secure or release the tweeter from the woofer assembly. The woofer combines a curvilinear mica-reinforced polypropylene cone with a Santoprene half-roll surround and VAST 2.0 surround geometry. A removable motor cover can help accommodate installations with limited rear clearance.\u003c\/p\u003e\u003cp\u003eWhen the tweeter is moved to a separate location, the included phase plug installs in the woofer and the included external passive crossover is used for the tweeter connection. The external crossover provides a 9 kHz high-pass filter and selectable 0 dB or -3 dB tweeter attenuation. This makes the P2V2-69 a flexible option for a factory speaker replacement, a two-way component upgrade, or a system that may later add compatible P3V2-25 midrange speakers.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConvertible Two-Way Design:\u003c\/strong\u003e Use the set as coaxial speakers or separate components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI.L.M. Tweeter Lock:\u003c\/strong\u003e Removes and secures tweeters without changing the woofer location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Handling:\u003c\/strong\u003e Matches well with appropriately powered aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVAST 2.0 Surround:\u003c\/strong\u003e Increases effective cone area within the speaker frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Passive Crossovers:\u003c\/strong\u003e Support remote tweeter mounting with selectable attenuation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Motor Cover:\u003c\/strong\u003e Reduces required rear mounting depth in tight locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P2V2-69 uses a 20-40% mica-reinforced polypropylene curvilinear woofer cone, Santoprene half-roll surround, 15% glass-fiber-reinforced PA66 composite basket, and 3\/4-inch Tetolon inverted-dome tweeter. The cone and surround are chemically bonded, while the woofer uses a vented Kapton voice-coil former, Nomex spider, and ferrite motor structure. Copper spring contacts in the flush and surface tweeter cups allow the tweeters to be serviced from the front.\u003c\/p\u003e\u003cp\u003eConfirm the 8.41 x 5.71-inch cutout and 3.13-inch mounting-depth requirements before purchase; removing the motor cover reduces the mounting depth to 2.55 inches. For coaxial use, install the speaker with its tweeter locked in place. For component use, relocate each tweeter using an included cup, install the supplied phase plug in the woofer, and connect the external passive crossover as directed; grilles are not included and are sold separately.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768056832191,"sku":"P2V2-69","price":188.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/51sNyWqI2UL_de194788-375c-4dcd-99c3-b058bba24ecf.jpg?v=1782270693"},{"product_id":"rockford-fosgate-t1675-s","title":"Rockford Fosgate T1675-S 6.75\" Component Speaker System","description":"\u003cp\u003eThe Rockford Fosgate T1675-S is a 6.75-inch, 2-way component speaker system designed for replacing factory front speakers with separately mounted woofers and tweeters. Its external crossover networks divide the audio signal between the drivers, helping place high frequencies closer to the listener rather than low in the door. This layout is well suited to vehicle owners who want a more focused front soundstage than a coaxial speaker arrangement typically provides.\u003c\/p\u003e\u003cp\u003eEach system includes two 6.75-inch woofers, two 1-inch treated-fabric dome tweeters, and two external crossovers. The woofers use injection-molded carbon-fiber-filled polypropylene cones with butyl-rubber VAST surrounds. Together, these elements are intended to provide controlled midbass response while the separate tweeters handle upper-frequency detail.\u003c\/p\u003e\u003cp\u003eThe T1675-S is rated for 100 watts RMS and 200 watts peak power per side at a nominal 4-ohm impedance. Its 55 Hz to 22 kHz frequency response and 89 dB sensitivity rating make it appropriate for a properly matched aftermarket amplifier or a system designed around clean, moderate power. The speaker system is CEA-2031 power-handling compliant.\u003c\/p\u003e\u003cp\u003eRockford Fosgate uses a StampCast steel woofer basket with FlexFit mounting slots, which allow a degree of adjustment during installation. VAST, or Vertical Attach Surround Technique, increases effective cone area without enlarging the basket. The treated-fabric dome tweeters use neodymium motor structures and can be flush or surface mounted.\u003c\/p\u003e\u003cp\u003eThis component set is a practical choice for a front-stage upgrade in vehicles with room for separate tweeters and crossover placement. Included Multi-OEM adapter plates can be modified for certain 5x7-, 6x8-, and 6x9-inch openings, while the supplied grilles support custom installations. Match the speakers with compatible 4-ohm amplification and use the included crossovers to keep woofer and tweeter connections properly managed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component Layout:\u003c\/strong\u003e Separate woofers, tweeters, and crossovers support front-stage placement flexibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W RMS Power Handling:\u003c\/strong\u003e Supports amplifier-matched power up to 100 watts RMS per side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon-Fiber-Filled IMPP Cones:\u003c\/strong\u003e Lightweight, rigid woofer cones help maintain controlled response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVAST Butyl-Rubber Surrounds:\u003c\/strong\u003e Increases effective cone area without increasing basket size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated Fabric Dome Tweeters:\u003c\/strong\u003e Separate 1-inch tweeters reproduce upper-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable External Crossovers:\u003c\/strong\u003e Provides tweeter-level and placement-related setup options.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe T1675-S uses injection-molded carbon-fiber-filled polypropylene woofer cones, butyl-rubber surrounds, and rigid StampCast steel baskets. Its 1-inch treated-fabric dome tweeters use neodymium motor structures, while the external crossover networks use 5% tolerance components. Grilles, trim rings, and mounting hardware are included for custom or replacement-speaker installations.\u003c\/p\u003e\u003cp\u003eConfirm available mounting space before purchase: each woofer requires a 5.68-inch mounting cutout and 2.51 inches of mounting depth. The tweeters can be flush mounted or surface mounted, with angled surface-mount positions available. Connect each woofer and tweeter through its supplied crossover, and use an amplifier or source compatible with the system's nominal 4-ohm load.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768080031935,"sku":"T1675-S","price":166.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/713y7zLWIEL.jpg?v=1782271139"},{"product_id":"rockford-fosgate-t1650-s","title":"Rockford Fosgate T1650-S 6.5\" Component Speaker System","description":"\u003cp\u003eThe Rockford Fosgate T1650-S is a 6.5-inch, 2-way component speaker system designed for a front-stage car audio upgrade. Unlike a coaxial speaker, it separates the woofer and tweeter so each driver can be mounted where it performs most effectively. This helps replace limited factory sound with clearer detail and more controlled midrange reproduction.\u003c\/p\u003e\u003cp\u003eThis set is intended for listeners who want a component system with separate tweeters, external crossover networks, and practical vehicle-fitment flexibility. Each side is rated for 80 watts RMS at 4 ohms, making it appropriate for a properly matched aftermarket amplifier or a conservative factory-radio installation. The separate crossover networks direct the appropriate frequencies to the woofer and tweeter.\u003c\/p\u003e\u003cp\u003eThe 6.5-inch woofers use carbon-fiber-reinforced polypropylene cones, Santoprene rubber surrounds, and 1.2-inch high-temperature aluminum voice coils. Their 47 Hz to 20 kHz frequency-response rating covers the midbass and midrange range needed for door-speaker installations. A treated fabric-dome tweeter handles high frequencies with a separate mounting location.\u003c\/p\u003e\u003cp\u003eRockford Fosgate incorporates VAST technology to increase effective cone area and uses a FlexFit 2 basket intended to support mounting adjustments. The system also uses external asymmetric crossovers with 18 dB-per-octave high-pass and 12 dB-per-octave low-pass sections. Tweeter-level, tweeter-axis, and bi-amp settings provide setup flexibility when placement varies by vehicle.\u003c\/p\u003e\u003cp\u003eThe T1650-S works well as a front-door and dash, sail-panel, or A-pillar component upgrade where separate tweeter placement is possible. It includes the major speaker-system pieces needed for installation, including woofers, tweeters, crossover networks, grilles, and mounting hardware. Confirm vehicle-specific cutout, depth, panel clearance, and wiring needs before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Component Design:\u003c\/strong\u003e Separates woofer and tweeter placement for a more tailored front-stage installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80W RMS Per Side:\u003c\/strong\u003e Supports amplifier matching up to 80 watts RMS at 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon-Fiber Reinforced Cone:\u003c\/strong\u003e Provides a rigid woofer diaphragm for midrange and midbass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated Fabric-Dome Tweeters:\u003c\/strong\u003e Handle high-frequency playback through dedicated external crossovers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Crossover Networks:\u003c\/strong\u003e Use 18 dB high-pass and 12 dB low-pass slopes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexFit 2 Basket:\u003c\/strong\u003e Provides mounting adjustment flexibility for compatible vehicle locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe T1650-S combines carbon-fiber-reinforced polypropylene woofer cones, Santoprene rubber surrounds, high-temperature aluminum voice coils, and treated fabric-dome tweeters. Its woofer design also incorporates VAST technology, while the FlexFit 2 basket is designed for mounting flexibility. Protective woofer grilles are included.\u003c\/p\u003e\u003cp\u003eInstall each woofer in a location that accepts its 5.51-inch mounting diameter and 2.52-inch mounting depth, allowing additional clearance for window mechanisms and door structure. Mount the tweeters using the supplied flush, surface, or angle-mount hardware as appropriate, then wire each woofer and tweeter through its included passive crossover. Use the crossover's selectable tweeter-level, axis, and bi-amp provisions only according to the system wiring plan and installation manual.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768080851135,"sku":"T1650-S","price":160.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71n_MvDjQdL.jpg?v=1782271147"},{"product_id":"rockford-fosgate-t2652-s","title":"Rockford Fosgate T2652-S 6.5\" Component Speaker System","description":"\u003cp\u003eThe Rockford Fosgate T2652-S is a 6.5-inch, 2-way component speaker system for vehicle owners upgrading from factory door speakers. Its separate woofers, tweeters, and external crossovers allow more flexible placement than a coaxial speaker setup. The kit is designed for installations where improved detail, controlled midrange output, and adjustable high-frequency presentation are important.\u003c\/p\u003e\u003cp\u003eA pair of 6.5-inch woofers handles the midrange and lower-frequency portion of the system, while separate 1-inch aluminum dome tweeters reproduce upper-frequency detail. The system is rated for 100 watts RMS and 200 watts peak power at 4 ohms. Its 55 Hz to 22 kHz frequency response supports use as a front-stage component system in a full-range car audio installation.\u003c\/p\u003e\u003cp\u003eThe woofer uses an injection-molded carbon-fiber-reinforced polypropylene cone, a VAST SBR surround, and a high-temperature aluminum voice coil. A billet-machined aluminum phase plug is incorporated into the woofer design. These elements are paired with a linear high-excursion motor, magnetic, and suspension design.\u003c\/p\u003e\u003cp\u003eThe included external crossover network divides frequencies at 3 kHz using an asymmetrical Butterworth design. It uses an 18 dB-per-octave high-pass section and a 12 dB-per-octave low-pass section. Tweeter output can be adjusted through selectable attenuation settings, while the axis switch helps accommodate on-axis or off-axis tweeter placement.\u003c\/p\u003e\u003cp\u003eThe T2652-S can be connected in standard full-range amplifier mode or configured for bi-amplification with dedicated woofer and tweeter amplifier channels. Its FlexFit basket uses slotted mounting locations to assist with aligning the woofer in compatible openings. Included adapter plates, grilles, crossover networks, and multiple tweeter mounting options support a more complete installation package.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Component System:\u003c\/strong\u003e Separate woofers and tweeters allow more deliberate sound-stage placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-Watt RMS Rating:\u003c\/strong\u003e Matches well with amplifiers rated from 30 to 100 watts RMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Dome Tweeters:\u003c\/strong\u003e Handle high frequencies through separate 1-inch tweeters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Butterworth Crossovers:\u003c\/strong\u003e Direct frequencies to the appropriate woofer or tweeter driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Tweeter Settings:\u003c\/strong\u003e Provides attenuation and axis options for installation-based tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBi-Amp Capability:\u003c\/strong\u003e Supports separate amplifier channels for woofers and tweeters.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe T2652-S combines carbon-fiber-reinforced polypropylene woofer cones with VAST SBR surrounds, high-temperature aluminum woofer voice coils, and StampCast frame construction. The woofer also uses a billet-machined aluminum phase plug, while the tweeters use aluminum domes with integral suspension. External crossovers use poly-capacitors and air-core inductors, and the package includes both polished and brushed aluminum tweeter trim rings.\u003c\/p\u003e\u003cp\u003eConfirm available mounting depth, cutout diameter, and window or door-panel clearance before installation. The woofer requires a 5.59-inch mounting diameter and 2.51-inch mounting depth, while the flush tweeter mount uses a 1.75-inch opening. Use the included crossover network, maintain speaker polarity, and select standard or bi-amp wiring according to the amplifier configuration.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768081277119,"sku":"T2652-S","price":225.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/714TfvwbpFL.jpg?v=1782271160"},{"product_id":"rockford-fosgate-t3652-s","title":"Rockford Fosgate T3652-S 6.5\" 2-Way Component Speakers","description":"\u003cp\u003eThe Rockford Fosgate T3652-S is a 6.5-inch, 2-way component speaker system for upgrading a vehicle's front-stage sound with separately mounted woofers and tweeters. Its component layout allows the tweeters to be positioned higher in the cabin than the woofers, helping create a more focused presentation than a coaxial speaker installation. The system is rated for 125 watts RMS and uses a 4-ohm nominal impedance.\u003c\/p\u003e\u003cp\u003eThis set is intended for listeners building a detailed, amplified car audio system rather than simply replacing a damaged factory speaker. The 6.5-inch woofers handle the midbass and lower midrange range, while the 1-inch tweeters reproduce higher frequencies through the included passive crossover network. A 40 Hz to 30 kHz frequency-response rating gives the system broad stated bandwidth for use with a subwoofer or as part of a full-range upgrade.\u003c\/p\u003e\u003cp\u003eThe woofers use woven Liquid Crystal Polymer fiber cones, butyl-rubber VAST surrounds, linear Nomex spiders, and high-excursion neodymium motor assemblies. Their die-cast aluminum frames provide a rigid mounting foundation, while an integrated shorting ring and external heat sinking are used on the woofer motor structure. The 1.5-inch high-temperature aluminum voice-coil former is designed to support the system's rated power handling.\u003c\/p\u003e\u003cp\u003eA dedicated external crossover divides the signal at 3 kHz with an 18 dB-per-octave high-pass section and a 12 dB-per-octave low-pass section. It includes selectable tweeter output settings of +2 dB, 0 dB, and -2 dB, allowing installers to tailor the high-frequency balance for the tweeter location. The crossover also provides selectable on-axis or off-axis operation and a selectable bi-amp configuration.\u003c\/p\u003e\u003cp\u003eThe T3652-S is well suited to custom door, kick-panel, or pillar-based installations where tweeter placement can be planned carefully. Its 5.67-inch mounting diameter and 2.79-inch woofer mounting depth should be checked against the vehicle before installation. Grilles, woofer mounting hardware, and flush or surface\/angled tweeter mounting hardware are included for a more complete component-system installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Component System:\u003c\/strong\u003e Separates woofer and tweeter placement for a more flexible front-stage installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e125-Watt RMS Rating:\u003c\/strong\u003e Supports use with an appropriately matched external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoven LCP Woofer Cone:\u003c\/strong\u003e Uses a rigid Liquid Crystal Polymer fiber cone for midbass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Passive Crossover:\u003c\/strong\u003e Provides 3 kHz filtering, tweeter-level adjustment, and bi-amp selection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Motor System:\u003c\/strong\u003e Combines high-excursion motor design with matched woofer suspension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Tweeter Mounting:\u003c\/strong\u003e Includes DDC mounting plus flush and angled surface-mount hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe T3652-S uses die-cast aluminum woofer frames with FlexFit mounting slots, woven LCP cones, butyl-rubber VAST surrounds, Nomex spiders, and neodymium motor structures. The 1-inch tweeters use LCP domes with treated silk surrounds and are supported by the DDC tweeter mounting system. Woofer grilles and mounting hardware are supplied with the system.\u003c\/p\u003e\u003cp\u003ePlan the woofer location around the 5.67-inch cutout and 2.79-inch mounting-depth requirements, then choose a flush or angled surface location for each tweeter. Connect the woofers and tweeters through the supplied crossover, observing speaker polarity, and use the crossover's level and axis settings to suit the physical tweeter placement. For amplified installations, Rockford Fosgate specifies 37.5 to 125 watts RMS of recommended amplifier power.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768081342655,"sku":"T3652-S","price":629.15,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61CmcFhz3ZS.jpg?v=1782271162"},{"product_id":"hertz-mp165p-3","title":"Hertz MP165P-3 6.5\" 3-Ohm Component Woofer","description":"\u003cp\u003eThe Hertz MP165P-3 is a 6.5-inch component woofer designed to bring focused mid-bass performance to a custom car audio system. It is intended for installations where a separate woofer, tweeter, and crossover—or an active DSP-based setup—are used instead of a coaxial speaker. Its 3-ohm nominal impedance helps compatible amplifiers deliver more output than a comparable 4-ohm driver.\u003c\/p\u003e\u003cp\u003eThis woofer is suited to listeners building a front-stage system with strong kick-drum impact, bass guitar definition, and clear lower-midrange presence. Its rated 45 Hz to 4.5 kHz operating range makes it appropriate for use with a properly selected tweeter or midrange. A subwoofer can be added below it for deeper bass extension and higher overall system output.\u003c\/p\u003e\u003cp\u003eThe MP165P-3 uses a 25 mm pure-copper voice coil wound on a polyamide former. The voice coil has a 14 mm winding height and is paired with a 95 mm high-density-flux ferrite magnet. This motor design supports 100 W continuous power handling and controlled cone movement.\u003c\/p\u003e\u003cp\u003eA pressed-pulp cone reinforced with cotton fibers is formed in Hertz's exponential V-cone profile. The profile is designed to support linear midrange behavior and broader off-axis dispersion, which is useful in door-mounted automotive installations. Its Boundary Free rubber surround is engineered to support efficient mid-bass output and extended cone travel.\u003c\/p\u003e\u003cp\u003eThe woofer is built on a low-depth aluminum-alloy basket that is designed to remain acoustically open behind the cone. With a 141 mm cutout requirement and 64 mm mounting depth, fitment should be checked against the vehicle door or speaker enclosure before purchase. It can be used as part of a Hertz Mille Pro component system or in a carefully tuned active system with compatible amplification and crossover settings.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Ohm Nominal Impedance:\u003c\/strong\u003e Helps compatible amplifiers produce strong output from each channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 W Continuous Handling:\u003c\/strong\u003e Supports amplified front-stage and component-system applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePure Copper Voice Coil:\u003c\/strong\u003e Uses a polyamide former for dependable high-power operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExponential V-Cone:\u003c\/strong\u003e Supports linear midrange response and off-axis dispersion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoundary Free Rubber Surround:\u003c\/strong\u003e Allows efficient movement for fuller mid-bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFerrite Motor Assembly:\u003c\/strong\u003e Uses a 95 mm high-density-flux ferrite magnet.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MP165P-3 combines a pressed-pulp-and-cotton-fiber cone with a rubber surround, pure-copper voice coil, ferrite magnet, and aluminum-alloy basket. Its basket uses an acoustically transparent structure and a low-depth design intended to reduce installation constraints. The speaker weighs 1.2 kg and has a 165 mm nominal frame diameter.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle or enclosure provides a 141 mm mounting cutout and at least 64 mm of mounting depth, while also allowing clearance for the 74.5 mm overall depth dimension. Use a compatible amplifier and crossover or DSP to limit low-frequency excursion and set an appropriate upper crossover point for the companion tweeter or midrange. Optional grilles are listed by Hertz for installations where the cone needs added protection.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":45771448975551,"sku":"MP165P-3","price":159.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71y7A19K8zL_0739d67f-b742-416c-8bea-cec694e6c244.jpg?v=1782362610"},{"product_id":"hertz-dsk130-3","title":"Hertz DSK130-3 5.25\" 2-Way Component Speaker Kit","description":"\u003cp\u003eThe Hertz DSK130-3 is a 2-way component speaker kit built around separate 130 mm woofers, 24 mm tweeters, and passive crossover networks. It is intended for vehicle audio upgrades where a separate tweeter location can improve front-stage placement over a conventional coaxial speaker. The system uses a 4-ohm design and is rated for 60 watts continuous power handling.\u003c\/p\u003e\u003cp\u003eThis kit suits listeners replacing factory front speakers with a component arrangement that separates midrange and high-frequency drivers. The supplied high-pass crossover directs high frequencies to the tweeter at 3.5 kHz. Its 93 dB SPL sensitivity rating supports use in a range of appropriately matched vehicle audio systems.\u003c\/p\u003e\u003cp\u003eThe DV 130.3 woofer uses a water-repellent pressed-paper V-cone and a TPU surround. This combination is designed to support controlled excursion while keeping the cone suitable for door-speaker installations. A high-density ferrite magnet and 25 mm copper voice coil support the woofer assembly.\u003c\/p\u003e\u003cp\u003eThe DT 24.3 tweeter uses a 24 mm PEI dome-cone diaphragm with a neodymium magnet and annular acoustic lens. Its compact format allows separate placement in factory sail panels, dashboard locations, or compatible custom mounts. The rated system frequency response is 60 Hz to 23 kHz.\u003c\/p\u003e\u003cp\u003eFor a complete front-stage upgrade, the DSK130-3 can be paired with a compatible 4-ohm head unit or amplifier and installed with its included crossover networks. The separate-driver format gives installers flexibility to position the tweeters toward the listening area. Verify vehicle mounting space, wiring paths, and tweeter locations before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component Layout:\u003c\/strong\u003e Separates woofer and tweeter duties for flexible driver placement in the vehicle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eV-Cone Woofer:\u003c\/strong\u003e The pressed-paper cone profile is designed to support off-axis midrange response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 mm PEI Tweeter:\u003c\/strong\u003e A compact PEI dome-cone tweeter handles the system's high-frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Tweeter Motor:\u003c\/strong\u003e The tweeter uses a neodymium magnet in a small mounting format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Pass Crossover:\u003c\/strong\u003e Included DX 300 crossover networks use a 3.5 kHz, 12 dB\/octave high-pass filter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Woofer Cone:\u003c\/strong\u003e The pressed-paper woofer cone is treated for improved resistance to moisture exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe woofer uses a high-density ferrite magnet, 25 mm pure-copper voice coil on a Conex former, TPU surround, and DIN-size basket with abrasion-resistant dust paint. Tin-plated high-current terminals and silver-plated lead wires are used on the woofer assembly. The tweeter combines a PEI dome-cone diaphragm, neodymium magnet, and annular acoustic lens.\u003c\/p\u003e\u003cp\u003eInstall the 130 mm woofers in locations with adequate basket and rear-depth clearance, then mount the separate tweeters using the supplied flush or angled mounting accessories as appropriate. Route the crossover networks between the amplifier or head-unit speaker outputs and the individual woofer and tweeter drivers. Confirm correct polarity, secure all components to the vehicle structure, and check fitment before permanently modifying panels.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":45771449761983,"sku":"DSK130-3","price":93.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71e5pfms3ML.jpg?v=1782362640"},{"product_id":"hertz-dsk165-3","title":"Hertz DSK165.3 Dieci 6.5\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Hertz DSK165.3 is a 6.5-inch, two-way component speaker system designed for upgrading factory front-stage audio with separate woofers, tweeters, and crossover components. Its component layout allows the tweeters to be positioned higher in the cabin than a coaxial speaker typically permits. This helps create a more focused presentation for vocals and upper-frequency detail.\u003c\/p\u003e\u003cp\u003eBuilt for vehicles using 6.5-inch speaker locations, the DSK165.3 combines 4-ohm impedance with 93 dB SPL sensitivity. Hertz rates the system for 80 watts continuous power handling and 160 watts peak power handling. It is suited to installations driven by a compatible factory or aftermarket source, as well as systems using appropriately configured external amplification.\u003c\/p\u003e\u003cp\u003eThe woofer uses a water-repellent pressed-paper V-cone design with a TPU surround. This construction is intended to support controlled cone movement, useful midrange detail, and bass output within the speaker's operating range. The specified frequency response is 50 Hz to 23 kHz.\u003c\/p\u003e\u003cp\u003eFor high frequencies, the system uses 24 mm PEI dome tweeters with neodymium magnets. The supplied high-pass crossover is specified at 3.5 kHz with a 12 dB-per-octave slope. Separating the tweeter and woofer lets the system direct the appropriate frequency range to each driver.\u003c\/p\u003e\u003cp\u003eThe DSK165.3 is a practical choice for a front-door and dash, sail-panel, or A-pillar upgrade where separate tweeter placement is possible. Its 144 mm woofer mounting cutout and 64 mm mounting depth should be checked against the vehicle before installation. Optional grilles are available, while tweeter mounting accessories are included.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component Layout:\u003c\/strong\u003e Separates woofer and tweeter placement for a more flexible front-stage installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Woofer:\u003c\/strong\u003e Fits many common aftermarket speaker locations when mounting measurements allow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eV-Cone Woofer Profile:\u003c\/strong\u003e Supports off-axis response and detailed mid-to-high frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Uses a 24 mm dome and neodymium magnet for high-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive High-Pass Crossover:\u003c\/strong\u003e Directs high frequencies to the tweeter at a 3.5 kHz crossover point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Adds moisture resistance to the woofer cone material.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe woofer combines a water-repellent pressed-paper cone, TPU surround, high-density-flux ferrite magnet, pure-copper voice coil, and DIN-size basket with abrasion-resistant dust paint. The tweeter uses a PEI dome and neodymium magnet. Tin-plated high-current terminals, silver-plated lead wires, and a butyl-rubber protective cover are specified for the woofer assembly.\u003c\/p\u003e\u003cp\u003eConfirm a 144 mm mounting cutout and at least 64 mm of woofer mounting depth before purchase, while allowing room for the separate tweeters and crossover components. The included double-angle cup, tweeter cup, and tweeter gasket support external or flush-style tweeter mounting approaches. Use the specified crossover with the system and verify amplifier or head-unit compatibility with a 4-ohm speaker load.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":45771449827519,"sku":"DSK165-3","price":98.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71qQu9En_5L.jpg?v=1782362644"},{"product_id":"hertz-k170","title":"Hertz K 170 6.7\" Two-Way Component Speaker System","description":"\u003cp\u003eThe Hertz K 170 is a 6.7-inch, two-way component speaker system designed for vehicle audio upgrades where separate woofers and tweeters are preferred over coaxial speakers. It combines V 170 woofers with compact T 24 tweeters to place high frequencies more flexibly in the vehicle. The system is rated at 70 watts continuous power handling and uses a 4-ohm nominal impedance.\u003c\/p\u003e\u003cp\u003eThis component set is suited to listeners replacing factory speakers who want clearer front-stage presentation and more installation flexibility. Its separate tweeter design can help position upper-frequency output closer to ear level when the vehicle layout allows. The integrated tweeter crossover simplifies the signal path for an OEM-style upgrade.\u003c\/p\u003e\u003cp\u003eThe V 170 woofer uses a water-repellent pressed-paper cone and foam surround. Its V-Cone profile is designed to support off-axis response, which is useful when speakers are installed low in doors or other angled factory locations. A 25 mm pure-copper woofer voice coil works with a high-flux-density ferrite magnet.\u003c\/p\u003e\u003cp\u003eThe T 24 tweeter uses a 24 mm PEI dome diaphragm and a neodymium magnet. An annular acoustic lens is incorporated to support off-axis high-frequency dispersion. This arrangement is intended to maintain useful detail when the tweeters cannot be aimed directly at the listener.\u003c\/p\u003e\u003cp\u003eWith a 55 Hz to 23 kHz frequency response specification, the K 170 can serve as a front-speaker upgrade in a full-range system. It can be used from a compatible factory or aftermarket head unit, or with amplification matched appropriately to its 70-watt continuous rating. For systems seeking more low-frequency output, it can be paired with a separately selected subwoofer and amplifier.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component System:\u003c\/strong\u003e Separate woofers and tweeters allow more flexible speaker placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70W Continuous Power:\u003c\/strong\u003e Supports amplifier matching up to its stated continuous rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eV 170 Woofer:\u003c\/strong\u003e V-Cone profile supports response in off-axis door installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Compact 24 mm diaphragm handles high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Tweeter Crossover:\u003c\/strong\u003e 6 dB\/octave filtering is built into the tweeter wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Mounting Accessories:\u003c\/strong\u003e Supports external or embedded tweeter mounting options.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe woofer combines a water-repellent pressed-paper cone, foam surround, 25 mm pure-copper voice coil, and 80 mm high-flux-density ferrite magnet. Its DIN-size basket is protected by abrasion-resistant dust paint. The tweeter uses a PEI dome, neodymium magnet, and annular acoustic lens in a compact housing.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's available mounting space before installation: the woofer has a 140 mm mounting opening requirement and 45 mm mounting depth specification. The tweeter can be externally mounted or embedded using the supplied mounting accessories. Connect the tweeter through its integrated crossover wiring and use a compatible 4-ohm source or amplifier.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":45771449893055,"sku":"K170","price":46.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71fApJ3MciL.jpg?v=1782362648"},{"product_id":"hertz-k165","title":"Hertz K165 6.5\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Hertz K165 is a 6.5-inch, two-way component speaker system designed for front-stage upgrades in vehicles with separate woofer and tweeter locations. It replaces basic factory speakers with dedicated woofers and tweeters for more defined placement of midrange and high-frequency sound. Its 4-ohm design is suited to compatible factory radios or aftermarket amplification.\u003c\/p\u003e\u003cp\u003eThe system uses separate V 165 woofers and T 24 tweeters, allowing the tweeters to be positioned higher in the vehicle when suitable mounting locations are available. This layout can help direct higher frequencies toward the listening area rather than keeping all sound low in the doors. It is a practical option for OEM-style upgrades where component-speaker mounting provisions already exist.\u003c\/p\u003e\u003cp\u003eEach woofer uses a water-repellent pressed-paper V-cone with a foam surround. The cone profile is engineered for off-axis response, while the foam surround supports the woofer's sensitivity and bass response. A 25 mm pure-copper voice coil and high-flux ferrite magnet support its stated 75-watt continuous power handling.\u003c\/p\u003e\u003cp\u003eThe T 24 tweeter combines a 24 mm PEI dome with a neodymium magnet in a compact design. Its annular acoustic lens is designed to improve off-axis performance, which is useful where tweeters cannot be aimed directly at the listener. The tweeter wiring includes the system's integrated 6 dB\/octave crossover.\u003c\/p\u003e\u003cp\u003eWith a 55 Hz to 23 kHz stated frequency response and 93.5 dB SPL sensitivity, the K165 is intended as a full-range component set for a vehicle's front channels. It can be used as the primary speaker upgrade in a simple system or paired with a separate subwoofer for deeper low-frequency output. Verify the vehicle's mounting diameter, mounting depth, factory wiring, and available tweeter locations before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component Layout:\u003c\/strong\u003e Separate 6.5-inch woofers and tweeters allow placement appropriate to the vehicle's speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W Continuous Handling:\u003c\/strong\u003e Supports use with amplification rated appropriately for a 4-ohm speaker load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eV-Cone Woofer:\u003c\/strong\u003e The pressed-paper cone profile is engineered for useful off-axis response and midrange detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e A compact 24 mm dome handles high frequencies with a neodymium magnet assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Tweeter Crossover:\u003c\/strong\u003e The 6 dB\/octave crossover is built into the tweeter wiring to simplify installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Tweeter Mounting:\u003c\/strong\u003e Included accessories support external or embedded tweeter mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe V 165 woofer uses a water-repellent pressed-paper cone, foam surround, pure-copper voice coil, high-density-flux ferrite magnet, and DIN-size basket with abrasion-resistant dust paint. The T 24 uses a PEI dome, neodymium magnet, and annular acoustic lens. Hertz specifies a 25 mm woofer voice coil, a 14 mm tweeter voice coil, and ±3.5 mm mechanical excursion.\u003c\/p\u003e\u003cp\u003eInstall the woofers in compatible 6.5-inch locations only after confirming clearance against the listed physical dimensions. Connect the integrated crossover-equipped tweeter wiring as directed in the owner's manual, and use the supplied tweeter mounting parts for flush or surface-style placement. The set is appropriate for vehicles that can accommodate separate woofer and tweeter locations; vehicle-specific brackets, harnesses, or adapters may still be required.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":45771449925823,"sku":"K165","price":48.34,"currency_code":"USD","in_stock":true}]},{"product_id":"hertz-k130","title":"Hertz K130 5.25\" Two-Way Component Speaker System","description":"\u003cp\u003eThe Hertz K130 is a 130 mm (5-inch class) two-way component speaker system designed for replacing factory-installed front speakers. It separates the woofer and tweeter so they can be positioned more effectively than a typical coaxial speaker. This makes it a practical option for vehicles with dedicated door-speaker and tweeter locations.\u003c\/p\u003e\u003cp\u003eThe system combines V 130 woofers with T 24 tweeters to cover bass, midrange, and high-frequency duties. Its 55 W continuous power handling and 4-ohm impedance make it suitable for use with compatible factory radios or an appropriately matched external amplifier. With 93 dB SPL sensitivity, it is designed to produce useful output without requiring unusually high amplifier power.\u003c\/p\u003e\u003cp\u003eThe V 130 woofer uses a water-repellent pressed-paper cone, foam surround, and V-cone profile. This construction is intended to support clear midrange response and bass output from a compact door-mounted driver. A 25 mm pure-copper voice coil and high-density ferrite magnet support the woofer motor assembly.\u003c\/p\u003e\u003cp\u003eFor the high frequencies, the T 24 tweeter uses a 24 mm PEI dome and neodymium magnet. Its annular acoustic lens is designed to support off-axis performance, which is useful when tweeters must be mounted away from the listener's direct line of sight. The tweeter wiring includes an integrated 6 dB\/octave crossover.\u003c\/p\u003e\u003cp\u003eThe K130 is suited to an OEM-style speaker upgrade where separate tweeter placement is available or can be added. Its compact woofer dimensions and included tweeter mounting accessories support a range of installation approaches. Pair it with a properly configured head unit or amplifier, while confirming vehicle mounting depth, cutout, and wiring requirements before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component Design:\u003c\/strong\u003e Separates woofer and tweeter placement for a more flexible front-stage upgrade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e130 mm Woofer:\u003c\/strong\u003e Fits applications designed for a 5-inch-class speaker size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI-Dome Tweeter:\u003c\/strong\u003e Uses a compact 24 mm dome for high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Tweeter Crossover:\u003c\/strong\u003e A 6 dB\/octave filter is built into the tweeter wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e The woofer cone material is designed for automotive-door use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eV-Cone Woofer Profile:\u003c\/strong\u003e Supports off-axis response in typical vehicle speaker locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe V 130 woofer uses a water-repellent pressed-paper cone, foam surround, pure-copper 25 mm voice coil, and high-density ferrite magnet. Its DIN-size basket is protected by abrasion-resistant dust paint. The T 24 tweeter combines a PEI dome, neodymium magnet, and annular acoustic lens.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 130 mm woofer and compare the available opening and depth with the listed 116 mm mounting opening dimension and 52 mm mounting-depth dimension. The included tweeter accessories support external or embedded mounting. Connect the tweeter through its integrated crossover wiring, and use an amplifier or radio compatible with a 4-ohm speaker load.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":45771449958591,"sku":"K130","price":48.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71PsOqaLeLL.jpg?v=1782362652"},{"product_id":"hertz-cpk690","title":"Hertz CPK 690 6x9\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Hertz CPK 690 is a 6x9-inch, two-way component speaker system from the Cento PRO line. It is designed for vehicles with oval 6x9 speaker locations, including many door applications common in North American vehicles. By separating the woofer and tweeter, the system allows more flexible placement than a coaxial speaker design.\u003c\/p\u003e\u003cp\u003eThis system is intended for listeners upgrading factory door speakers who want stronger midbass output and more controlled high-frequency reproduction. Its 120-watt continuous power rating and 4-ohm nominal impedance make it suitable for use with a properly matched aftermarket amplifier. The stated frequency response extends from 35 Hz to 22.5 kHz.\u003c\/p\u003e\u003cp\u003eThe CP 690 woofer uses a water-repellent pressed-paper cone with FEM-optimized geometry. Hertz combines this cone with a 30.5 mm double-layer voice coil, high-density-flux ferrite motor, low-carbon polar plates, and a three-spoke basket with a rubber magnet cover. These elements are designed to support controlled operation and power handling in a door-mounted installation.\u003c\/p\u003e\u003cp\u003eHigh frequencies are handled by the separate CP 25 tweeter, which uses a 29 mm soft Tetolon fiber dome and a neodymium magnet. Its 25 mm voice coil is ferrofluid-cooled, while the rear chamber contains damping material. The tweeter faceplate uses FEM-optimized geometry intended to support more consistent response when installed off-axis.\u003c\/p\u003e\u003cp\u003eA CPCX 690 passive crossover divides the signal between the woofer and tweeter at 3.1 kHz. It provides a 6 dB-per-octave low-pass section for the woofer and a 12 dB-per-octave high-pass section for the tweeter. The crossover's three-position tweeter-level setting helps tailor upper-frequency output to the vehicle, mounting location, and listener preference.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Component Layout:\u003c\/strong\u003e Separates woofer and tweeter for flexible placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120W Continuous Power:\u003c\/strong\u003e Supports properly matched aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed-Paper Woofer Cone:\u003c\/strong\u003e Water-repellent cone balances stiffness and low mass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e29 mm Tetolon Tweeter:\u003c\/strong\u003e Soft-dome design handles upper-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Crossover Network:\u003c\/strong\u003e Directs frequencies to the appropriate speaker driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Level Adjustment:\u003c\/strong\u003e Select -2 dB, 0 dB, or +2 dB.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CP 690 woofer combines a water-repellent pressed-paper cone, double-layer voice coil, ferrite magnet assembly, low-carbon polar plates, and a transparent three-spoke basket. The CP 25 tweeter uses a Tetolon fiber dome, neodymium magnet, ferrofluid-cooled voice coil, damped rear chamber, and FEM-optimized faceplate. The compact CPCX 690 crossover uses metallic-finish 160 V polyester-film capacitors, pure-copper inductors, and venting for heat dissipation.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle has suitable 6x9 mounting locations and adequate mounting depth before installation; the CP 690 mounting depth is listed as 85 mm. Route the amplifier or head-unit speaker output through the CPCX 690 crossover, then connect its dedicated woofer and tweeter outputs to the respective drivers. Use secure mounting, protect wiring from sharp edges and moving parts, and select the tweeter-level setting after listening from the driver's seat.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":45771449991359,"sku":"CPK690","price":259.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71ntsdFbe3L.jpg?v=1782362653"},{"product_id":"hertz-mpk165p-3","title":"Hertz MPK165P-3 6.5\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Hertz MPK 165P.3 is a 6.5-inch, two-way component speaker system designed for upgrading a vehicle's front-stage sound. It separates the woofer and tweeter so each driver can be placed where it works most effectively in the cabin. The included passive crossover manages the frequency split between them for a coordinated installation.\u003c\/p\u003e\u003cp\u003eThis system is intended for listeners building a detailed front stage with strong mid-bass support. Its 3-ohm nominal impedance is designed to make effective use of compatible amplifier power, while its 115-watt continuous power handling supports amplified systems. With a 45 Hz to 22.5 kHz system frequency response, it covers the core musical range while pairing naturally with a dedicated subwoofer for lower bass duties.\u003c\/p\u003e\u003cp\u003eThe MP 165P.3 woofer uses an exponential V-cone pressed-pulp cone reinforced with cotton fibers. Its Boundary Free rubber surround is engineered to support efficient movement and broad mid-bass output. A 14 mm pure-copper voice coil on a polyamide former and a 95 mm ferrite magnet support controlled operation during dynamic passages.\u003c\/p\u003e\u003cp\u003eHigh frequencies are handled by the separate MP 25.3 tweeter, which uses a 29 mm Tetolon fiber soft dome. Its Center Tuning Duct geometry, ferrofluid-cooled 25 mm voice coil, and rear damping chamber are designed for controlled high-frequency response. The tweeter's neodymium motor and optimized faceplate also support flexible off-axis installation.\u003c\/p\u003e\u003cp\u003eThe MPCX 2P.3 passive crossover joins the system together at 4 kHz. Its woofer section uses a 1 mm pure-copper-wire inductor, while the tweeter section uses a 160 V bi-metallized polyester film capacitor and air-core inductor. A selectable 0 or +2.5 dB tweeter setting allows the upper-frequency level to be adjusted for vehicle acoustics and tweeter placement.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component System:\u003c\/strong\u003e Separates woofer and tweeter placement for a more focused front-stage installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Ohm Nominal Impedance:\u003c\/strong\u003e Helps compatible amplifiers deliver strong output from available power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon Fiber Soft-Dome Tweeter:\u003c\/strong\u003e Provides dedicated high-frequency reproduction with a 29 mm diaphragm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePure-Copper Woofer Voice Coil:\u003c\/strong\u003e Uses a 14 mm coil on a polyamide former for power handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoundary Free Rubber Surround:\u003c\/strong\u003e Supports woofer excursion and broad mid-bass performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Passive Crossover:\u003c\/strong\u003e Offers a 0 or +2.5 dB tweeter-level setting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MP 165P.3 woofer combines a pressed-pulp-and-cotton-fiber V-cone with a Boundary Free rubber surround, high-density ferrite magnet, and acoustically transparent aluminum-alloy basket. The MP 25.3 tweeter uses a Tetolon fiber dome, neodymium magnet, and ferrofluid-cooled voice coil. A metal mesh grille with an aluminum Hertz logo and mineral-powder-coated inner grille is included, along with tweeter mounting accessories.\u003c\/p\u003e\u003cp\u003eConfirm available door depth and a 141 mm cutout before installation; the woofer has a 64 mm mounting depth and 74.5 mm overall depth. Mount the MPCX 2P.3 crossover in a dry, protected location and wire the amplifier to its input terminals, then connect its dedicated woofer and tweeter outputs to the matching drivers. The crossover measures 102 x 76.5 x 37 mm, and the tweeter level can be set to 0 or +2.5 dB after listening from the driver's seat.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":45771450024127,"sku":"MPK165P-3","price":303.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81tKk2G23vL.jpg?v=1782362655"},{"product_id":"hertz-dsk160-3","title":"Hertz DSK160-3 6\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Hertz DSK160-3 is a 6-inch, two-way component speaker system designed for vehicle audio upgrades that need separate woofers and tweeters. It combines DV 160.3 mid-woofers with DT 24.3 tweeters and compact inline crossover wiring. This format lets the tweeters be placed independently from the woofers for a more flexible installation.\u003c\/p\u003e\u003cp\u003eWith 80 watts continuous power handling and a 4-ohm system impedance, this kit is suited to compatible aftermarket head units or external amplification. Its 93 dB SPL sensitivity supports strong output from modest power while retaining capacity for a properly matched amplifier. The 50 Hz to 23 kHz stated frequency response covers midbass through high-frequency detail.\u003c\/p\u003e\u003cp\u003eThe DV 160.3 woofer uses a water-repellent pressed-paper V-cone and a TPU surround. This construction is intended to support controlled excursion and damp resonances in typical door-speaker locations. A high-density-flux ferrite motor and pure copper voice coil provide the woofer's drive system.\u003c\/p\u003e\u003cp\u003eThe DT 24.3 uses a 24 mm PEI dome-cone tweeter with a neodymium magnet and annular acoustic lens. Its compact size supports external or flush-style mounting with the supplied mounting accessories. The supplied high-pass crossover wiring directs high frequencies to the tweeter while reducing installation space requirements.\u003c\/p\u003e\u003cp\u003eThis kit is a practical choice for replacing factory 6-inch component speakers where separate tweeter placement is available. An included adapter ring is intended for select GM and Honda vehicles with 6-inch OEM speaker positions. Check vehicle-specific mounting depth, cutout dimensions, wiring connections, and panel clearance before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component System:\u003c\/strong\u003e Separate woofers and tweeters allow more flexible speaker placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80W RMS Handling:\u003c\/strong\u003e Supports compatible head units or properly matched amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Helps suit the woofer for vehicle door environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 mm PEI Tweeter:\u003c\/strong\u003e Handles upper-frequency reproduction in a compact format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInline High-Pass Crossover:\u003c\/strong\u003e Saves mounting space in OEM-style upgrade installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGM\/Honda Adapter Ring:\u003c\/strong\u003e Helps fit select vehicles using 6-inch OEM speakers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DV 160.3 woofer combines a high-density-flux ferrite magnet, 25 mm pure copper voice coil on a Conex former, V-cone profile, and TPU surround. Its DIN-size basket has abrasion-resistant dust paint, while tin-plated terminals and silver-plated lead wires are used for its electrical connections. The DT 24.3 tweeter uses a neodymium magnet, PEI dome-cone diaphragm, and annular acoustic lens.\u003c\/p\u003e\u003cp\u003eInstall the woofers only where the 127 mm cutout and approximately 56.5 mm mounting depth can be accommodated, while allowing clearance for the basket and terminals. Connect the tweeter through the supplied crossover wiring rather than directly to a full-range speaker output. Use the supplied tweeter cups, gasket, and adapter ring where appropriate, and verify polarity and vehicle-specific fitment before reassembling trim panels.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":45771450056895,"sku":"DSK160-3","price":93.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/618vCIhVXtL.jpg?v=1782362658"},{"product_id":"hertz-dpk165-3","title":"Hertz DPK165-3 6.5\" Component Speaker System","description":"\u003cp\u003eThe Hertz DPK165-3 is a 6.5-inch, 2-way component speaker system designed for upgrading factory front-stage speakers with separately mounted woofers, tweeters, and passive crossovers. Its 4-ohm design works with compatible aftermarket amplifiers or car-stereo power, while its 80-watt RMS system rating provides useful headroom for a properly matched installation. The separate-driver layout allows the tweeters to be positioned higher in the cabin than door-mounted coaxial speakers.\u003c\/p\u003e\u003cp\u003eThis set is intended for listeners who want clearer vocal placement and more controlled midrange response from a conventional 6.5-inch speaker location. The 165 mm DPV 165.3 woofer uses a water-repellent pressed-paper cone and a V-cone profile intended to support off-axis listening in vehicle doors. Its stated 45 Hz to 23 kHz system frequency response covers low bass, midrange, and high-frequency detail within a component setup.\u003c\/p\u003e\u003cp\u003eA 26 mm DPT 26.3 soft Tetolon dome tweeter handles upper-frequency reproduction. The tweeter's 1.5 kHz resonance frequency supports use with the supplied passive crossover network, which divides the signal at 5 kHz. Separating the high-frequency driver from the woofer also gives installers flexibility to aim the tweeters toward the listening area.\u003c\/p\u003e\u003cp\u003eThe DPCX 2.3 external crossover uses a 6 dB\/octave low-pass section for the woofer and a 12 dB\/octave high-pass section for the tweeter, both at 5 kHz. Its vented enclosure and gold-plated terminal block provide dedicated connection points for amplifier input, woofer output, and tweeter output. This keeps frequency-routing components outside the speaker baskets for a more traditional component-system layout.\u003c\/p\u003e\u003cp\u003eThe DPK165-3 can serve as a front-speaker upgrade in a system using a compatible head unit or external amplifier. With 93 dB SPL sensitivity and 4-ohm nominal impedance, it is suited to installations where amplifier power and mounting depth have been checked before purchase. A subwoofer may be added separately when deeper low-frequency output is desired.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Component System:\u003c\/strong\u003e Separate woofers, tweeters, and crossovers support flexible front-stage placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80W RMS Handling:\u003c\/strong\u003e Supports compatible amplification up to 80 watts continuous per system rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon Dome Tweeter:\u003c\/strong\u003e A 26 mm soft dome handles high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eV-Cone Woofer:\u003c\/strong\u003e Woofer profile is designed to support smooth off-axis midrange response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal DPCX 2.3 Crossover:\u003c\/strong\u003e Routes bass and treble frequencies to their respective drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Pressed-paper woofer cone is made for automotive speaker applications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe system combines a high-density-flux ferrite woofer motor, neodymium tweeter motor, water-repellent pressed-paper woofer cone, and soft Tetolon tweeter dome. The DPV 165.3 woofer has a 165 mm outer diameter, 144 mm mounting cutout, and 72 mm mounting depth. The compact DPCX 2.3 crossover measures 102 x 76.5 x 32.5 mm.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 6.5-inch speaker, a 144 mm cutout, and 72 mm of mounting depth before installation. Mount each woofer in a rigid door or speaker location, position the tweeter where it can be directed toward occupants, and wire the amplifier or head-unit output to the crossover input before connecting its dedicated woofer and tweeter outputs. Observe polarity at every connection and use the crossover supplied for this system.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":45771450089663,"sku":"DPK165-3","price":130.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61DJ-gMsEzL.jpg?v=1782362659"},{"product_id":"hertz-ck165l","title":"Hertz CK165L 6.5\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Hertz CK165L is a 6.5-inch, 2-way component speaker system designed for vehicle audio upgrades where separate woofers and tweeters are preferred over factory full-range speakers. Its 4-ohm design suits many aftermarket amplifiers and compatible factory-replacement installations. The system pairs C 165 L woofers with C 26 dome tweeters and dedicated passive crossover networks.\u003c\/p\u003e\u003cp\u003eThis kit is intended for listeners seeking a more defined front soundstage, with bass and midrange handled by door-mounted woofers and high frequencies placed separately. The 165 mm woofers use non-pressed paper cones to provide controlled low-frequency response. A 26 mm Tetolon fiber tweeter supports detailed upper-frequency reproduction.\u003c\/p\u003e\u003cp\u003eThe CK165L is rated for 100 watts continuous power handling and 300 watts peak power handling. Its complete system frequency response is specified at 50 Hz to 22.5 kHz. Woofer sensitivity is rated at 91 dB SPL, while tweeter sensitivity is rated at 92 dB SPL.\u003c\/p\u003e\u003cp\u003eHertz uses a high-density-flux ferrite motor with low-carbon polar plates on the C 165 L woofer. Its 25 mm voice coil is wound on an aluminum former and is designed for extended excursion. The woofer also uses a three-spoke basket and rubber magnet cover to help control unwanted mechanical vibration.\u003c\/p\u003e\u003cp\u003eSeparate CCX 2W and CCX 2T crossovers simplify placement compared with a single large network. The woofer network uses a 6 dB-per-octave low-pass section, while the tweeter network uses a 12 dB-per-octave high-pass section. This makes the CK165L a practical component-system upgrade for installations with suitable door locations, tweeter locations, and amplifier or receiver power.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Component System:\u003c\/strong\u003e Separate woofers, tweeters, and crossovers support flexible speaker placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-Pressed Paper Woofer Cone:\u003c\/strong\u003e Helps deliver natural midrange and controlled low frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon Dome Tweeter:\u003c\/strong\u003e Soft 26 mm dome reproduces detailed high frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate Passive Crossovers:\u003c\/strong\u003e Compact woofer and tweeter filters simplify system routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Tweeter Level:\u003c\/strong\u003e Choose 0 dB or +3 dB treble attenuation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective Grilles Included:\u003c\/strong\u003e Supplied ABS grilles add protection for exposed woofer installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe C 165 L woofer combines a water-repellent non-pressed paper cone, high-density-flux ferrite magnet, low-carbon polar plates, and a 25 mm aluminum-former voice coil. The C 26 tweeter uses a Tetolon fiber dome and neodymium magnet. Hertz also supplies high-resistance ABS grilles with a metallic finish and removable metal mesh.\u003c\/p\u003e\u003cp\u003eConfirm available door-panel clearance and mounting opening dimensions before purchase. The woofer requires a 142 mm mounting hole and 62.5 mm mounting depth, while the C 26 tweeter supports OEM, flush, or angled mounting approaches with its installation accessories. Connect the amplifier or head-unit speaker output to the separate crossover inputs, then route each crossover output only to its designated woofer or tweeter.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":45771450122431,"sku":"CK165L","price":196.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81cePpoRACL_5470b356-5070-4e6e-8789-db31c6006b14.jpg?v=1782362661"},{"product_id":"hertz-ck165","title":"Hertz CK 165 6.5\" Two-Way Component Speaker System","description":"\u003cp\u003eThe Hertz CK 165 is a 6.5-inch two-way component speaker system designed for vehicle owners replacing factory front speakers with separate woofers, tweeters, and passive crossovers. Separating the high-frequency drivers from the door woofers gives installers more flexibility to position the tweeters near the listening area. The system is rated at 95 watts continuous and uses a 4-ohm nominal impedance.\u003c\/p\u003e\u003cp\u003eThis kit is suited to listeners seeking a more detailed front soundstage than a conventional coaxial speaker can provide. Its 26 mm Tetolon dome tweeters are engineered for natural medium- and high-frequency reproduction, while the 165 mm woofers handle the lower and midrange registers. The stated system frequency response is 55 Hz to 22.5 kHz.\u003c\/p\u003e\u003cp\u003eThe C 165 woofers use Hertz SPP-M semi-pressed paper-mica cones, combining semi-pressed paper with mica powder for a balance of low mass and damping. A high-density-flux ferrite motor and low-carbon polar plates support woofer control and reduced distortion at higher power levels. Each woofer uses a 25 mm voice coil on an aluminum former.\u003c\/p\u003e\u003cp\u003eFor the upper range, the C 26 tweeter uses a 26 mm soft Tetolon fiber dome, a 20 mm voice coil, and a neodymium magnet. Its faceplate geometry is optimized for off-axis installations, which is relevant when tweeters must be mounted in factory sail panels, dashboards, or other angled locations. The supplied passive crossover divides the system at 2.5 kHz with 12 dB-per-octave high-pass filtering.\u003c\/p\u003e\u003cp\u003eThe included CCX 2 crossover provides a selectable tweeter output level of 0 dB or +3 dB, allowing the high-frequency balance to be adjusted for vehicle acoustics and mounting position. CK 165 can be used with a compatible factory-radio upgrade or an external amplifier that is appropriate for its 4-ohm load and power rating. It is intended as a component-system upgrade, rather than a single drop-in coaxial replacement.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component System:\u003c\/strong\u003e Separate woofers and tweeters support flexible driver placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPP-M Woofer Cones:\u003c\/strong\u003e Paper-mica cones balance damping and rigidity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon Dome Tweeters:\u003c\/strong\u003e Soft 26 mm domes reproduce upper frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive CCX 2 Crossover:\u003c\/strong\u003e Directs frequencies to the appropriate driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Level Adjustment:\u003c\/strong\u003e Select 0 dB or +3 dB output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective Grilles:\u003c\/strong\u003e Supplied ABS-and-metal-mesh grilles protect the woofers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe C 165 woofer combines a semi-pressed paper-mica cone, ferrite magnet, aluminum voice-coil former, compact three-spoke basket, and rubber magnet cover. The C 26 tweeter uses a neodymium motor and soft Tetolon dome. Supplied CG 165 grilles use a high-resistance ABS structure with a metallic finish and removable metal mesh.\u003c\/p\u003e\u003cp\u003eConfirm available door-panel clearance before installation: the C 165 woofer has a 142 mm mounting diameter and 62.5 mm mounting depth. Route the amplifier or head-unit speaker output to each CCX 2 crossover, then connect its woofer and tweeter outputs to their corresponding drivers with correct polarity. The C 26 supports flush, angled, and OEM-location mounting options, and Hertz illustrates a suggested equal-distance tweeter layout for display-style or in-car placement.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":45771450155199,"sku":"CK165","price":186.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81rrN0TWZTL.jpg?v=1782362663"},{"product_id":"hertz-ck130","title":"Hertz CK 130 5.25\" Two-Way Component Speaker System","description":"\u003cp\u003eThe Hertz CK 130 is a 5.25-inch, two-way component speaker system designed for vehicle audio upgrades where separate woofers and tweeters are preferred over a coaxial layout. It combines C 130 midbass woofers, C 26 tweeters, and external CCX 2 passive crossovers. The system is rated at 70 watts continuous power handling and uses a 4-ohm nominal impedance.\u003c\/p\u003e\u003cp\u003eThis kit is suited to listeners who want to place the tweeters separately from the woofers for more flexible soundstage and imaging setup. The C 26 tweeter uses a 26 mm Tetolon dome and a 20 mm voice coil for detailed upper-frequency reproduction. Its faceplate geometry is engineered to support a linear response in off-axis installations.\u003c\/p\u003e\u003cp\u003eThe C 130 woofer uses an SPP-M semi-pressed paper cone reinforced with mica powder. This material is intended to balance low moving mass with damping, while the 25 mm voice coil uses an aluminum former. A high-density ferrite magnet and low-carbon polar plates support woofer control at higher power levels.\u003c\/p\u003e\u003cp\u003eExternal CCX 2 crossovers divide frequencies at 2.5 kHz with a 12 dB-per-octave high-pass slope. The crossover includes a selectable tweeter-level setting of 0 dB or +3 dB, allowing the upper-frequency output to be adjusted for the vehicle and mounting position. Pure-copper inductors and low-loss capacitors are used in the crossover network.\u003c\/p\u003e\u003cp\u003eThe CK 130 is a practical option for replacing factory component speakers or building a compact front-stage system. Its 65 Hz to 22.5 kHz stated frequency response supports a wide listening range, while separate driver placement can help accommodate factory or custom woofer and tweeter locations. Grilles are included for installations where the woofers are exposed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component System:\u003c\/strong\u003e Separate woofers, tweeters, and crossovers allow flexible driver placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPP-M Woofer Cone:\u003c\/strong\u003e Semi-pressed paper with mica balances damping and rigidity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon Dome Tweeter:\u003c\/strong\u003e A 26 mm soft dome handles upper-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCX 2 Passive Crossover:\u003c\/strong\u003e Divides frequencies at 2.5 kHz for each driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Level Adjustment:\u003c\/strong\u003e Select 0 dB or +3 dB high-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Protective Grilles:\u003c\/strong\u003e Metal-mesh grilles help protect exposed woofer installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe C 130 woofer combines a semi-pressed paper-mica cone, aluminum-former voice coil, ferrite motor, three-spoke basket, and rubber magnet cover. The C 26 tweeter uses a Tetolon dome with a neodymium magnet. The supplied woofer grilles use a high-resistance ABS structure with a metallic finish and protective metal mesh.\u003c\/p\u003e\u003cp\u003eConfirm available door or panel clearance before installation, including the 119 mm woofer cutout diameter and the depth required behind the mounting surface. Connect each woofer and tweeter to its supplied CCX 2 crossover rather than directly in parallel, then connect the crossover input to the amplifier or head-unit speaker output. Use the 0 dB or +3 dB tweeter setting after installation to suit the tweeter location and listening position.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":45771450187967,"sku":"CK130","price":187.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71zgCW2tUVL.jpg?v=1782362665"},{"product_id":"hertz-mpk130-3","title":"Hertz MPK130-3 5.25\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Hertz MPK130-3 Mille Pro is a 5.25-inch, two-way component speaker system for upgrading a vehicle's front-stage sound while retaining a compact installation footprint. It combines separate MP 130.3 woofers, MP 25.3 tweeters, and MPCX 2.3 passive crossovers to divide mid-bass and high-frequency duties. The system is rated for 100 watts continuous power handling and 200 watts peak at 4 ohms.\u003c\/p\u003e\u003cp\u003eThis set is suited to listeners who want a more defined, properly separated speaker upgrade than a coaxial replacement can provide. Its 130 mm woofer is designed for broad dispersion and useful low-frequency extension in compact factory speaker locations. With a specified frequency response of 60 Hz to 22.5 kHz, it covers the core mid-bass, vocal, and treble ranges in a component layout.\u003c\/p\u003e\u003cp\u003eThe MP 130.3 woofer uses an exponential V-cone pressed-pulp cone with cotton fibers and a Boundary Free rubber surround. This construction increases the usable cone area relative to conventional surrounds while supporting controlled mid-bass output. A pure-copper voice coil on a polyamide former is paired with a high-density-flux ferrite magnet assembly.\u003c\/p\u003e\u003cp\u003eFor high frequencies, the MP 25.3 tweeter uses a 29 mm Tetolon fiber soft dome and a 25 mm ferrofluid-cooled voice coil. Its Center Tuning Duct geometry and damped rear chamber are engineered for a lower resonance frequency and controlled high-pass behavior. The supplied MPCX 2.3 crossover is set at 3.5 kHz and includes a selectable 0 or +2 dB tweeter-level adjustment.\u003c\/p\u003e\u003cp\u003eThe MPK130-3 works well as a front-door and dash, sail-panel, or A-pillar component upgrade where separate woofer and tweeter placement is possible. Its passive crossover allows the system to be run from two amplifier channels or compatible head-unit speaker outputs, subject to appropriate power matching. Included mounting accessories help accommodate flush or angled tweeter installation approaches.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component System:\u003c\/strong\u003e Separates woofer and tweeter placement for a more flexible front-stage installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Continuous Handling:\u003c\/strong\u003e Supports amplification matched to its 4-ohm system rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eV-Cone Woofer:\u003c\/strong\u003e Pressed-pulp cone profile supports broad midrange dispersion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoundary Free Surround:\u003c\/strong\u003e IIR butyl-rubber surround expands the effective cone area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon Soft-Dome Tweeter:\u003c\/strong\u003e 29 mm diaphragm handles the system's high-frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Passive Crossover:\u003c\/strong\u003e Selectable 0 or +2 dB tweeter output helps balance tonal level.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe woofer uses a low-depth, acoustically transparent aluminum-alloy basket with spider vent holes, a high-density ferrite magnet, and low-carbon-content iron plates. Its pressed-pulp-and-cotton-fiber cone is joined to a Boundary Free rubber surround. The tweeter uses a neodymium magnet, Tetolon fiber soft dome, ferrofluid-cooled voice coil, and a rear chamber with damping material.\u003c\/p\u003e\u003cp\u003eConfirm vehicle-specific woofer cutout, mounting depth, and tweeter mounting locations before installation. Connect the MP 130.3 woofer and MP 25.3 tweeter through the included MPCX 2.3 passive crossover rather than directly paralleling them on one channel. The included grilles, angled supports, flush-mounting rings, watchbands, and tweeter gaskets provide installation options for custom or OEM-style integration.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":45771450220735,"sku":"MPK130-3","price":280.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81Eah0_S7EL.jpg?v=1782362667"},{"product_id":"hertz-mlk165-3","title":"Hertz MLK165-3 6.5\" Two-Way Component Speakers","description":"\u003cp\u003eThe Hertz MLK165-3, identified by Hertz as the MLK 165.3 Legend, is a 6.5-inch two-way component speaker system for upgrading a vehicle’s front-stage sound. It combines separate woofers, tweeters, and passive crossovers rather than using a single coaxial speaker. This layout allows the high-frequency drivers to be mounted independently for a more tailored installation.\u003c\/p\u003e\u003cp\u003eThe system is rated for 150 watts continuous power handling and 300 watts peak at 4 ohms. Its stated 40 Hz to 25 kHz frequency response supports a broad range from low midbass through upper treble. It is intended for installations using compatible speaker-channel amplification or a suitable factory or aftermarket audio source.\u003c\/p\u003e\u003cp\u003eThe ML 165.3 woofer uses a cotton-injected paper cone with an exponential V-cone profile and a Boundary Free IIR rubber surround. Its 36 mm CCAW double-layer voice coil is wound on a Kapton former, while the high-density flux ferrite motor is designed for the woofer’s midrange operation. A three-spoke aluminum-alloy basket with integrated venting supports the driver structure.\u003c\/p\u003e\u003cp\u003eThe ML 28.3 tweeter uses a 35 mm Tetolon fiber dome and a double-neodymium magnet assembly. Hertz specifies FEA-optimized dome geometry and a larger rear chamber, with a listed tweeter resonant frequency of 900 Hz. These design elements support controlled high-frequency output and installation flexibility in component-system layouts.\u003c\/p\u003e\u003cp\u003eThe included MLCX 165.3 passive crossover divides the system at 3.5 kHz with a 12 dB-per-octave low-pass\/high-pass network. Its three tweeter-level terminals provide +2 dB, 0 dB, and -2 dB settings, and the Hi-Contour switch changes the tweeter high-pass behavior for different tweeter positions and angles. This makes the set suited to custom door-and-dash, door-and-sail-panel, or similar component-speaker upgrades.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component System:\u003c\/strong\u003e Separate woofers, tweeters, and crossovers support flexible speaker placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W Continuous Rating:\u003c\/strong\u003e Handles substantial continuous system power when properly matched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon Fiber Tweeters:\u003c\/strong\u003e 35 mm domes provide dedicated high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCotton-Injected Paper Woofers:\u003c\/strong\u003e Lightweight, stiff cone material supports responsive midbass performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Passive Crossovers:\u003c\/strong\u003e Tweeter level and Hi-Contour settings help tailor tonal balance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoundary Free Surround:\u003c\/strong\u003e IIR rubber surround is engineered for improved woofer efficiency.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ML 165.3 woofer uses a high-density flux ferrite magnet, CCAW voice coil on a Kapton former, cotton-injected paper cone, and vented three-spoke aluminum-alloy basket. The ML 28.3 tweeter combines a Tetolon fiber dome, natural-fiber non-woven damping material, and a double-neodymium magnet assembly. A die-cast aluminum grille with a diamond-cut Hertz logo is included.\u003c\/p\u003e\u003cp\u003eVerify vehicle-specific mounting clearance, speaker-opening diameter, and tweeter mounting options before installation. Wire each woofer and tweeter through its supplied MLCX 165.3 passive crossover, observing polarity and selecting the appropriate tweeter-level terminal. Use the Hi-Contour control and the +2\/0\/-2 dB tweeter setting to help accommodate the tweeter’s final location and listening angle.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":45771450253503,"sku":"MLK165-3","price":548.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71TB4nIXtWL.jpg?v=1782362669"},{"product_id":"hertz-mlk1650-3","title":"Hertz MLK1650-3 6.5\" Component Speaker System","description":"\u003cp\u003eThe Hertz MLK1650-3 Mille Legend is a 6.5-inch two-way component speaker system designed for front-stage car-audio upgrades. It separates mid-bass and high-frequency reproduction between dedicated woofers and tweeters, using external passive crossovers to direct the appropriate frequencies to each driver. This arrangement is suited to listeners building a more detailed, properly staged system than a coaxial-speaker installation provides.\u003c\/p\u003e\u003cp\u003eThe kit combines ML 1650.3 woofers with ML 280.3 Tetolon-dome tweeters and MLCX 2 TW.3 crossover networks. Its 4-ohm system impedance, 150-watt continuous power handling, and 300-watt peak rating make it appropriate for use with a suitably matched aftermarket amplifier. The system is intended to cover the critical front-stage range from mid-bass through treble.\u003c\/p\u003e\u003cp\u003eThe woofer uses a pressed-pulp cone with cotton fibers and an exponential V-Cone profile. These materials and geometry are designed to maintain controlled midrange behavior while providing useful mid-bass output from a 6.5-inch driver. A Boundary Free IIR rubber surround increases the active cone area relative to a conventional surround profile.\u003c\/p\u003e\u003cp\u003eThe 35 mm ML 280.3 tweeter uses a Tetolon fiber dome, neodymium motor, and die-cast aluminum faceplate. Its compact mounting format supports flush installation where a dedicated factory or custom tweeter location is available. The included crossover provides selectable tweeter-level adjustment as well as Hi-Boost, Mid-Contour, and Hi-Contour controls for tailoring the response to placement and vehicle acoustics.\u003c\/p\u003e\u003cp\u003eThe MLCX 2 TW.3 crossover also supports a selectable bi-amplified configuration. In this setup, separate amplifier channels can feed the woofer and tweeter sections through the crossover network. This makes the MLK1650-3 a flexible choice for a conventional component-speaker installation now or a more involved amplified system later.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component System:\u003c\/strong\u003e Separates woofer and tweeter duties for a focused front-stage installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W Continuous Handling:\u003c\/strong\u003e Supports use with a properly matched aftermarket amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed-Pulp Cotton-Fiber Cone:\u003c\/strong\u003e Balances low moving mass with controlled cone behavior.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoundary Free Rubber Surround:\u003c\/strong\u003e Expands usable cone area for mid-bass performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMLCX 2 TW.3 Crossover:\u003c\/strong\u003e Provides passive filtering and selectable response adjustments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Bi-Amplification:\u003c\/strong\u003e Allows separate amplifier channels for woofer and tweeter sections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ML 1650.3 woofer uses a neodymium magnet, low-carbon CNC-machined plates, an aluminum-covered pole, and a 36 mm CCAW dual-layer voice coil on a polyamide former. Its three-spoke aluminum-alloy basket includes venting holes, while the supplied grille uses die-cast aluminum construction. The ML 280.3 tweeter combines a Tetolon fiber dome, neodymium motor, and die-cast aluminum faceplate.\u003c\/p\u003e\u003cp\u003eConfirm vehicle-specific fitment before purchase, including the woofer cutout, mounting depth, door-panel clearance, and a suitable location for each crossover. Install the passive crossovers between the amplifier or head-unit speaker output and the individual woofer\/tweeter drivers, observing marked polarity. For bi-amplified use, move the crossover's bi-amplification selector to ON and connect separate amplifier channels to the woofer and tweeter inputs as shown in the Hertz instructions.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":45771450319039,"sku":"MLK1650-3","price":937.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71LSJbZYnLL.jpg?v=1782362671"},{"product_id":"hertz-mlk700-3","title":"Hertz MLK700-3 3\" Two-Way Component Speaker System","description":"\u003cp\u003eThe Hertz MLK700-3 is a 3-inch two-way component speaker system designed to cover the midrange and high-frequency portion of an advanced car-audio installation. It combines ML 700.3 extended midrange drivers, ML 280.3 tweeters, and dedicated MLCX 2 TM.3 passive crossover networks. This configuration is intended for systems that need focused mid-high reproduction while using separate larger drivers for bass and mid-bass duties.\u003c\/p\u003e\u003cp\u003eThis system is suited to enthusiasts building a multi-amplified front stage rather than replacing a conventional full-range door speaker. Hertz specifies it for use with ML 1650.3 or ML 1800.3 Legend woofers in an actively filtered configuration. The system has a 4-ohm nominal impedance and handles 100 watts continuous or 200 watts peak power.\u003c\/p\u003e\u003cp\u003eThe MLK700-3 covers a specified 200 Hz to 28 kHz frequency range, with the passive network crossing the midrange and tweeter at 4.5 kHz. The compact 70 mm midrange uses an exponential V-cone profile intended to support broad dispersion through the upper midrange. The separate 35 mm dome tweeter extends the system's upper-frequency capability while allowing more flexible placement.\u003c\/p\u003e\u003cp\u003eIts ML 700.3 midrange uses a pressed-pulp cone with cotton fibres, a Boundary Free IIR rubber surround, and a neodymium motor. The midrange also uses low-carbon-content CNC-machined plates, a copper-covered central pole, and a one-layer voice coil. For the tweeter, Hertz uses a Tetolon fiber dome, neodymium motor, copper short-circuit ring, and a die-cast aluminum faceplate.\u003c\/p\u003e\u003cp\u003eThe included MLCX 2 TM.3 crossover provides practical tonal adjustment after installation. Its Mid-Notch selector offers 0, -4, and -6 dB settings, while the tweeter level can be selected at +2, 0, or -2 dB. This makes the system adaptable to different mounting positions and the acoustic character of the vehicle cabin.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Inch Two-Way System:\u003c\/strong\u003e Combines a 70 mm extended midrange and 35 mm dome tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated Passive Crossover:\u003c\/strong\u003e Separates midrange and tweeter duties at 4.5 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMid-Notch Adjustment:\u003c\/strong\u003e Offers three midrange contour settings for vehicle-specific tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Level Control:\u003c\/strong\u003e Provides +2, 0, and -2 dB adjustment positions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eV-Cone Midrange Profile:\u003c\/strong\u003e Uses an exponential cone geometry for wide mid-high dispersion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium Driver Materials:\u003c\/strong\u003e Uses neodymium motors, cotton-fibre pulp, Tetolon, and aluminum parts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ML 700.3 midrange uses a three-spoke aluminum-alloy basket with built-in venting, a CNC-machined diamond-cut basket edge, and a supplied die-cast aluminum grille. Its cone is made from pressed pulp reinforced with cotton fibres, while the tweeter uses a CNC-machined aluminum frame and rear chamber with a die-cast aluminum faceplate. The crossover network uses 160V ultra-low-DF polyester bi-metallized film capacitors, air-wound copper inductors, and wirewound resistors.\u003c\/p\u003e\u003cp\u003ePlan this set as part of a component front-stage installation, with each crossover connected between the amplifier and its matching ML 700.3 midrange and ML 280.3 tweeter. Hertz's suggested setup specifies a 250 Hz high-pass filter at 12 dB per octave at the amplifier for the MLK 700.3 system. Verify available mounting space before installation: the ML 700.3 is listed at 87.8 mm overall diameter, 74 mm cutout diameter, and 41.3 mm mounting depth.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":45771450384575,"sku":"MLK700-3","price":731.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71nfs_ziK0L.jpg?v=1782362673"},{"product_id":"hertz-ck165f","title":"Hertz CK 165 F 6.5\" Shallow Component Speaker System","description":"\u003cp\u003eThe Hertz CK 165 F is a 6.5-inch, two-way component speaker system designed for vehicle locations where conventional replacement speakers may be too deep. Its flat-profile C 165 F woofers are intended to simplify upgrades in shallow factory door and panel locations. The kit combines separate woofers, tweeters, and passive crossovers for a more flexible installation than a coaxial speaker arrangement.\u003c\/p\u003e\u003cp\u003eThis system is suited to listeners replacing factory speakers while retaining practical fitment in vehicles with limited mounting depth. The 4-ohm system is rated for 90 watts continuous power handling and 270 watts peak power, making it appropriate for compatible aftermarket amplification or a capable factory or aftermarket radio. Its 93 dB SPL sensitivity supports efficient output from modest-power systems.\u003c\/p\u003e\u003cp\u003eThe C 165 F woofer uses an SPP-M semi-pressed paper cone reinforced with mica, balancing low moving mass with controlled rigidity. Its shallow basket and optimized moving assembly help address limited-depth installations without changing the basic 6.5-inch format. The woofer uses a high-density ferrite magnet and a pure-copper voice coil on an aluminum former.\u003c\/p\u003e\u003cp\u003eFor upper-frequency reproduction, the CK 165 F includes separate C 26 tweeters with 26 mm soft Tetolon domes and neodymium magnets. The tweeter design is intended to provide detailed, natural high-frequency reproduction, while the separate placement can help installers aim the high frequencies more effectively. The complete system covers a specified 65 Hz to 22.5 kHz frequency range.\u003c\/p\u003e\u003cp\u003eCompact CCX 2 passive crossovers divide frequencies between the woofer and tweeter at 2.5 kHz with a 12 dB-per-octave slope. The crossover provides 0 dB and +3 dB tweeter-level settings to help balance the high frequencies for the installation location. This makes the CK 165 F a practical front-stage upgrade when shallow 6.5-inch woofer fitment and separately mounted tweeters are desired.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow-Profile Woofers:\u003c\/strong\u003e Reduced-depth baskets support installation in constrained factory speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component Layout:\u003c\/strong\u003e Separate woofers, tweeters, and crossovers allow flexible speaker placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPP-M Woofer Cones:\u003c\/strong\u003e Mica-reinforced semi-pressed paper supports rigidity and controlled response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon Dome Tweeters:\u003c\/strong\u003e Soft 26 mm domes reproduce upper-frequency detail naturally.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCX 2 Passive Crossovers:\u003c\/strong\u003e External crossovers manage frequency division at 2.5 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter-Level Adjustment:\u003c\/strong\u003e Selectable 0 dB or +3 dB output helps tailor treble balance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe C 165 F woofer uses a high-density ferrite magnet, low-carbon pole plates, and a 25 mm pure-copper voice coil wound on an aluminum former. Its semi-pressed paper-mica cone is paired with a shallow basket profile, while the C 26 tweeter uses a Tetolon dome, 20 mm voice coil, and neodymium magnet. Included woofer grilles use an ABS frame with a metal mesh grille for speaker protection.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's speaker opening, available depth, mounting-hole pattern, and factory wiring before installation. The woofer's listed mounting depth is 43.5 mm (1.71 inches), while the external crossovers require a secure, dry mounting location and wiring from the amplifier or head unit to each crossover. Use the supplied tweeter mounting hardware as appropriate, observe polarity markings, and select the crossover tweeter level after listening from the driver's seat.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":45771450417343,"sku":"CK165F","price":208.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81q-YwVVetL.jpg?v=1782362674"},{"product_id":"hertz-cpk165","title":"Hertz CPK 165 6.5\" Two-Way Component Speaker System","description":"\u003cp\u003eThe Hertz CPK 165 is a 6.5-inch two-way component speaker system designed for car audio upgrades that separate the woofer and tweeter for more flexible placement. It combines CP 165 woofers, CP 25 dome tweeters, and CPCX 2 passive crossover networks. The system is intended for vehicles where improved front-stage detail and clearer placement of high frequencies are desired.\u003c\/p\u003e\u003cp\u003eWith 105 watts continuous power handling, 315 watts peak power handling, and a 4-ohm nominal impedance, the CPK 165 is suited to compatible aftermarket amplification or a properly matched factory-upgrade system. Its published frequency response is 45 Hz to 22.5 kHz, covering midbass through upper-frequency detail. The 92.5 dB SPL sensitivity rating supports efficient output from a suitably matched amplifier.\u003c\/p\u003e\u003cp\u003eThe CP 165 woofer uses a pressed-paper cone with FEM-optimized geometry and a butyl-rubber surround. Its high-density ferrite magnet and low-carbon pole plates are designed to maintain control at higher power levels. A 25 mm pure-copper voice coil supports the woofer's moving assembly.\u003c\/p\u003e\u003cp\u003eThe included CP 25 tweeter uses a 29 mm Tetolon fiber dome, a neodymium magnet, and a 25 mm voice coil cooled with ferrofluid. Hertz's Center Tuning Duct geometry is used to manage air exchange between the dome and rear chamber. The tweeter's low 1,200 Hz resonance frequency supports the system's 2.8 kHz crossover point.\u003c\/p\u003e\u003cp\u003eThe CPCX 2 passive crossover divides the signal at 2.8 kHz with a 12 dB-per-octave slope. Its three-position tweeter-level control provides -2 dB, 0 dB, and +2 dB settings for system tuning. This makes the kit appropriate for front-door and dash or sail-panel installations where tweeter location can affect tonal balance.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component Design:\u003c\/strong\u003e Separates woofer and tweeter placement for a more focused front stage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e105 W Continuous Handling:\u003c\/strong\u003e Supports use with a suitably matched aftermarket amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e29 mm Tetolon Tweeter:\u003c\/strong\u003e Provides dedicated high-frequency reproduction with a soft dome.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Tuning Duct:\u003c\/strong\u003e Helps lower tweeter resonance and reduce harmonic distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed-Paper Woofer Cone:\u003c\/strong\u003e Balances low mass and rigidity for controlled midbass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Passive Crossover:\u003c\/strong\u003e Offers -2 dB, 0 dB, and +2 dB tweeter settings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CP 165 woofer uses a compact three-spoke basket with a rubber magnet cover, a pressed-paper cone, and a butyl-rubber surround. The CP 25 tweeter uses a Tetolon dome and neodymium motor structure. Supplied woofer grilles combine a high-resistance ABS frame with removable metallic mesh.\u003c\/p\u003e\u003cp\u003eConfirm available mounting depth, cutout diameter, and door-panel clearance before installation, since vehicle fitment varies. Connect each woofer and tweeter through its included CPCX 2 passive crossover rather than directly paralleling the drivers. The crossover provides separate amplifier input, woofer output, and tweeter output connections, while its tweeter-level switch can be set during final tuning.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":45771453006015,"sku":"CPK165","price":233.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/815_ElUCUnL.jpg?v=1782362758"},{"product_id":"hertz-mpk165-3","title":"Hertz MPK 165.3 6.5\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Hertz MPK 165.3 is a 6.5-inch, 2-way component speaker system for replacing factory front-stage speakers with separately mounted woofers and tweeters. It combines the MP 165.3 woofer, MP 25.3 tweeter, and MPCX 2.3 passive crossover. This format allows more flexible tweeter placement than a coaxial speaker for a more focused front soundstage.\u003c\/p\u003e\u003cp\u003eDesigned for systems that need strong mid-bass from compact door locations, the MPK 165.3 has a rated frequency response of 40 Hz to 22.5 kHz. Its 110-watt continuous power rating and 4-ohm nominal impedance make it suitable for use with a properly matched aftermarket amplifier. The 92 dB system sensitivity also supports use in many upgraded factory-radio systems, though external amplification can provide greater output headroom.\u003c\/p\u003e\u003cp\u003eThe MP 165.3 woofer uses an exponential V-cone pressed-pulp cone with cotton fibers and a Boundary Free rubber surround. This construction is intended to maintain useful cone area and controlled mid-bass response while supporting broad midrange dispersion. A pure-copper voice coil on a Polyamide former and a high-density ferrite motor support the woofer section.\u003c\/p\u003e\u003cp\u003eHigh frequencies are handled by the MP 25.3, a 29 mm Tetolon fiber soft-dome tweeter with a neodymium magnet and 25 mm voice coil. Its rear chamber and Center Tuning Duct geometry are designed to support a low crossover region with the woofer. The dedicated MPCX 2.3 crossover divides the system at 3.5 kHz and offers a 0 or +2 dB tweeter-level setting.\u003c\/p\u003e\u003cp\u003eThis system is a practical fit for a front-door and dash, sail-panel, or A-pillar upgrade where separate tweeter positioning is possible. The woofer's 63 mm mounting depth can help in installations with limited door clearance, but vehicle-specific fitment should always be checked before purchase. Full-protection metal mesh grilles and mineral powder-coated inner grilles are included for installation options where the woofers are exposed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Component Layout:\u003c\/strong\u003e Separates woofer and tweeter placement for a tailored front-stage installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e110W Continuous Handling:\u003c\/strong\u003e Supports amplification matched to the system's continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eV-Cone Woofer:\u003c\/strong\u003e Pressed-pulp cone with cotton fibers supports wide midrange dispersion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoundary Free Surround:\u003c\/strong\u003e Rubber surround helps maximize effective cone area for mid-bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon Dome Tweeter:\u003c\/strong\u003e A 29 mm soft dome handles detailed high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Passive Crossover:\u003c\/strong\u003e Selectable 0 or +2 dB tweeter level helps balance the installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MP 165.3 woofer uses a high-density flux ferrite magnet, low-carbon iron plates, a pure-copper voice coil, and an acoustically transparent aluminum-alloy basket. The MP 25.3 tweeter uses a Tetolon fiber soft dome, neodymium magnet, ferrofluid-cooled voice coil, and rear chamber. The compact MPCX 2.3 crossover uses 160V bi-metallized polyester film capacitors, 1 mm pure-copper-wire inductors, and a vented top grille for heat dissipation.\u003c\/p\u003e\u003cp\u003eMount the 6.5-inch woofers in a rigid, properly sealed door or speaker location with sufficient clearance for their 63 mm mounting depth and 141 mm cutout diameter. Install the tweeters behind their protective grilles and use the supplied passive crossovers between the amplifier or head unit and each woofer\/tweeter set; do not connect the tweeters directly to full-range power. Confirm polarity, secure all wiring away from moving parts and sharp edges, and select the 0 or +2 dB tweeter setting after listening from the driver's seat.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":45771453235391,"sku":"MPK165-3","price":295.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81eCQjmFpYL.jpg?v=1782362770"},{"product_id":"audison-apk570","title":"Audison APK570 5 x 7\" 2-Way Component Speakers","description":"\u003cp\u003eThe Audison APK570 is a 2-way component speaker system designed for vehicles with factory 5 x 7-inch elliptical door-speaker locations. It combines AP 570 woofers, AP 1 tweeters, and dedicated APCX TW 570 passive crossovers. This kit is intended for replacing factory door speakers while retaining a separate tweeter layout.\u003c\/p\u003e\u003cp\u003eWith 100 watts continuous and 300 watts peak power handling, the APK570 is suited to amplified systems as well as compatible factory or aftermarket head-unit upgrades. Its 4-ohm nominal impedance supports common car-audio amplification configurations. The rated 55 Hz to 20 kHz frequency response covers midbass through high-frequency reproduction.\u003c\/p\u003e\u003cp\u003eThe AP 570 woofer uses a 32 mm pure-copper voice coil and a water-repellent treated paper cone. Its cone profile was developed with FEM simulation and optimized using Klippel R\u0026amp;D Scan Vibrometer measurement. A Triple Wave surround is used to support linear cone excursion.\u003c\/p\u003e\u003cp\u003eThe separate AP 1 tweeter uses a 26 mm diaphragm with a wide-roll surround. Its acoustic lens is designed to address in-car response effects in the 10 kHz to 13 kHz range associated with challenging OEM tweeter placements. The dedicated crossover routes high frequencies to the tweeter at a specified 3 kHz high-pass point.\u003c\/p\u003e\u003cp\u003eFor OEM-focused installation, the APK570 uses a compact woofer basket and reduced mounting depth. High-current double-contact Faston terminals simplify woofer and tweeter connections, while the compact crossover includes selectable tweeter attenuation. It is a practical option when a vehicle already accommodates 5 x 7-inch door woofers and separate tweeters.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 x 7-Inch Component System:\u003c\/strong\u003e Fits vehicles designed for elliptical 5 x 7-inch door woofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Continuous Power:\u003c\/strong\u003e Supports substantial power in an appropriately matched system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAP 1 Separate Tweeters:\u003c\/strong\u003e Provides dedicated high-frequency reproduction outside the woofer location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated Passive Crossovers:\u003c\/strong\u003e Directs high frequencies to the tweeters at 3 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Level Adjustment:\u003c\/strong\u003e Offers 0 dB or +2 dB attenuation selection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Helps suit the woofer to door-mounted use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 570 woofer combines a treated paper cone, Triple Wave surround, pure-copper voice coil, and compact coated basket. Its motor is secured with damping epoxy adhesive, while the AP 1 tweeter uses a wide-roll surround and acoustic lens. The crossover is compact and includes Faston connectors intended to reduce connection errors.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle has suitable 5 x 7-inch woofer openings and provisions for separate tweeters before installation. Use the included dedicated APCX TW 570 crossovers between the audio source or amplifier and the individual woofer and tweeter connections. Match the system to a compatible 4-ohm amplifier or speaker output and observe the 100-watt continuous power rating when setting amplifier gain.\u003c\/p\u003e","brand":"AUDISON","offers":[{"title":"Default Title","offer_id":45771454283967,"sku":"APK570","price":237.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71aKwGyxdOL.jpg?v=1782363019"},{"product_id":"audison-apk690","title":"Audison APK690 6x9\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Audison APK690 is a Prima Series 2-way component speaker system designed for vehicles with factory 6 x 9-inch door speaker locations. It combines AP 690 elliptical woofers, AP 1 tweeters, and dedicated APCX TW 690 passive crossovers. This configuration provides a practical upgrade path for vehicles that need separate high-frequency placement rather than a coaxial speaker.\u003c\/p\u003e\u003cp\u003eRated for 100 watts continuous and 300 watts peak power handling, the APK690 presents a 4-ohm load to the audio system. Its specified system frequency response is 40 Hz to 20 kHz, covering bass and midrange output from the wofer section along with high-frequency extension from the separate tweeters. The woofer sensitivity is rated at 95 dB SPL.\u003c\/p\u003e\u003cp\u003eThe AP 690 woofer uses a 25 mm pure-copper voice coil and a water-repellent treated paper cone. Its cone profile was developed with FEM simulation and optimized with Klippel R\u0026amp;D Scan Vibrometer measurements. A Triple Wave surround is used to support linear cone excursion, while the compact basket is intended to help with OEM-style door installations.\u003c\/p\u003e\u003cp\u003eThe AP 1 tweeter has a 26 mm diaphragm with a wide-roll surround and an acoustic lens. Audison specifies the lens to help compensate for in-car response effects in the 10 kHz to 13 kHz range associated with challenging OEM mounting locations. The separate tweeter arrangement gives installers flexibility to retain or improve factory high-frequency speaker positions.\u003c\/p\u003e\u003cp\u003eEach system uses an APCX TW 690 crossover, which applies a 6 dB-per-octave high-pass filter at 3.3 kHz for the tweeter. The compact crossover includes a 0 dB or +3 dB tweeter-level setting for adjustment after installation. The APK690 can be used as part of a factory-radio upgrade or paired with a compatible 4-ohm aftermarket amplifier.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 x 9-Inch Component System:\u003c\/strong\u003e Separate woofers and tweeters support flexible vehicle-specific placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Continuous Handling:\u003c\/strong\u003e Supports systems rated up to 100 watts continuous power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated Passive Crossovers:\u003c\/strong\u003e APCX TW 690 networks manage tweeter filtering and level adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Tweeter Output:\u003c\/strong\u003e Choose 0 dB or +3 dB tweeter attenuation settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Treated woofer cone is designed for door-speaker environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePure Copper Woofer Coil:\u003c\/strong\u003e 25 mm voice coil supports power handling and cone control.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 690 woofer uses a compact, abrasion-resistant and scratch-resistant coated basket, with the motor secured using damping epoxy adhesive. Its 90 x 32 x 15 mm woofer magnet and 25 mm voice coil are paired with a treated paper cone and Triple Wave surround. The AP 1 tweeter uses a 26 mm diaphragm, while the compact APCX TW 690 crossover measures 46.5 x 37.5 x 20.1 mm.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 6 x 9-inch elliptical woofer and has adequate mounting clearance before purchase. Install the AP 1 tweeters and AP 690 woofers through the supplied APCX TW 690 crossovers; the crossover's fast-on connectors are intended to simplify correct connections. Match the system to a compatible 4-ohm amplifier or speaker channel, and use the 0 dB or +3 dB tweeter setting to suit the final mounting location.\u003c\/p\u003e","brand":"AUDISON","offers":[{"title":"Default Title","offer_id":45771454316735,"sku":"APK690","price":259.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71-VOSfKKVL.jpg?v=1782363020"},{"product_id":"audison-apk130","title":"Audison APK130 5.25\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Audison APK130 is a 5.25-inch, two-way component speaker system designed for vehicle audio upgrades where separate woofers and tweeters are preferred over coaxial speakers. The kit combines AP 5 woofers, AP 1 tweeters, compact APCX TW passive crossovers, and protective grilles. Its 4-ohm design is intended for use with compatible factory or aftermarket car audio amplification.\u003c\/p\u003e\u003cp\u003eThis system is suited to installations with 130 mm speaker locations, including many OEM door and rear-panel placements. The separate 26 mm tweeters allow higher frequencies to be positioned closer to the listener than the woofers. That arrangement can help support a more focused front-stage installation when properly mounted and tuned.\u003c\/p\u003e\u003cp\u003eThe APK130 is rated for 75 watts continuous and 225 watts peak power handling per system, with a 70 Hz to 20 kHz published frequency response. The AP 5 woofer uses a 32 mm pure-copper voice coil, water-repellent treated paper cone, and TPU Triple Wave surround. Its 93 dB sensitivity specification supports efficient operation from appropriately matched power.\u003c\/p\u003e\u003cp\u003eThe AP 1 tweeter uses a 26 mm Tetolon-fibre diaphragm with a wide-roll surround and an acoustic lens. Audison specifies the lens to address response effects that can occur around 10 kHz to 13 kHz when the tweeter is installed behind restrictive OEM grilles. The included APCX TW crossover provides a selectable 0 dB or +2 dB tweeter level setting for different mounting conditions.\u003c\/p\u003e\u003cp\u003eFor an OEM-oriented upgrade, the compact woofer basket and reduced mounting depth help fit available factory speaker locations. High-current fast-on terminals on the woofers use double contacts on both positive and negative poles for flexible connection. The system can be used as a front component stage with an external amplifier or a compatible head unit, provided power and mounting requirements are checked before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component System:\u003c\/strong\u003e Separate woofers and tweeters support flexible speaker placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W Continuous Rating:\u003c\/strong\u003e Handles appropriately matched amplifier power for sustained playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAP 5 Woofer:\u003c\/strong\u003e 130 mm woofer uses a treated paper cone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAP 1 Tweeter:\u003c\/strong\u003e 26 mm Tetolon-fibre tweeter covers high frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Tweeter Level:\u003c\/strong\u003e APCX TW offers 0 dB and +2 dB settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Grilles:\u003c\/strong\u003e Protective grilles are supplied with the speaker system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 5 woofer combines a compact, abrasion-resistant coated basket with a damping-epoxy-secured motor, a water-repellent treated paper cone, and a TPU surround with Audison's shallow Triple Wave profile. Its 32 mm pure-copper voice coil is paired with an 85 x 40 x 13 mm magnet assembly. The AP 1 tweeter uses a neodymium magnet and a 20 mm CCAW voice coil on a Kapton former with ferrofluid cooling.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 130 mm woofer and provides sufficient mounting clearance before purchase; the AP 5 is listed at 48.5 mm mounting depth and 119 mm for Dimension B. Wire each AP 1 tweeter through its supplied APCX TW crossover, following the marked connections and preserving polarity. Use the 0 dB setting for an unobstructed A-pillar tweeter location, or the +2 dB setting when the tweeter is installed behind an OEM grille.\u003c\/p\u003e","brand":"AUDISON","offers":[{"title":"Default Title","offer_id":45771454841023,"sku":"APK130","price":246.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81K_dJe06AL.jpg?v=1782363050"},{"product_id":"audison-apk165ohm2","title":"Audison APK165OHM2 6.5\" 2-Way Component Speaker Set","description":"\u003cp\u003eThe Audison APK 165 Ω2 is a 6.5-inch, two-way component speaker system for vehicle audio upgrades. It combines AP 6.5 Ω2 woofers, AP 1 tweeters, dedicated passive crossovers, and grilles. The separate woofer and tweeter components allow placement that better suits factory speaker locations than a single coaxial speaker.\u003c\/p\u003e\u003cp\u003eThis system uses a 2-ohm nominal impedance and is intended for amplifiers that are stable at a 2-ohm speaker load. It is rated for 100 watts continuous power handling and 300 watts peak power. Confirm amplifier load capability and available installation space before choosing this version.\u003c\/p\u003e\u003cp\u003eThe APK 165 Ω2 has a specified frequency response of 50 Hz to 20 kHz and a 95 dB sensitivity rating. Its 75 Hz woofer resonance frequency and 2.8 mm maximum linear excursion support useful low-frequency output within a properly installed door or factory speaker location. A separate tweeter is used to cover upper frequencies instead of asking the woofer to reproduce the full range.\u003c\/p\u003e\u003cp\u003eThe AP 6.5 Ω2 woofer uses a water-repellent treated paper cone and a TPU surround with Audison's Triple Wave profile. Its 25 mm voice coil has a 10 mm winding height, while the compact basket is finished with an abrasion- and scratch-resistant coating. The AP 1 tweeter incorporates an acoustic lens intended to help balance response in the 10 kHz to 13 kHz region when used behind restrictive factory grilles.\u003c\/p\u003e\u003cp\u003eTwo separate passive crossovers divide the signal between the woofer and tweeter. The APCX WF Ω2 woofer network uses a low-loss inductor, while the APCX TW Ω2 tweeter network provides selectable Hi-Contour operation. Integrated crossover leads terminate in polarity-differentiated fast-on connectors to support OEM-style speaker replacement wiring.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm System:\u003c\/strong\u003e Designed to draw more power from compatible 2-ohm-stable amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Continuous Rating:\u003c\/strong\u003e Supports amplifier matching for sustained listening levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate Passive Crossovers:\u003c\/strong\u003e Direct woofer and tweeter frequencies to their intended drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi-Contour Tweeter Setting:\u003c\/strong\u003e Provides a selectable upper-frequency contour option for installation conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated Paper Woofer Cone:\u003c\/strong\u003e Uses water-repellent paper material for the 6.5-inch woofer cone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Style Fast-On Leads:\u003c\/strong\u003e Polarity-differentiated connectors simplify crossover-to-speaker connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe woofer uses a 165 mm frame with a 127 mm cone diameter, a 25 mm voice coil, and an 85 x 32 x 15 mm magnet. Its TPU Triple Wave surround is designed for linear excursion, while the compact basket is coated for abrasion and scratch resistance. The 26 mm AP 1 tweeter uses a 20 mm voice coil and an acoustic lens, and protective grilles are included.\u003c\/p\u003e\u003cp\u003eInstall the woofers only where the vehicle provides adequate mounting depth and clearance, and mount the tweeters securely behind a protective grille. Route the amplifier signal first to the supplied APCX WF Ω2 and APCX TW Ω2 passive networks, then connect each network to its matching driver using the integrated fast-on leads. Use an amplifier that is explicitly rated for 2-ohm operation, observe polarity, and select the tweeter contour setting according to the mounting position and factory-grille presence.\u003c\/p\u003e","brand":"AUDISON","offers":[{"title":"Default Title","offer_id":45771454873791,"sku":"APK165OHM2","price":234.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81IO11vf2SL.jpg?v=1782363052"},{"product_id":"audison-apk165","title":"Audison APK 165 6.5\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Audison APK 165 is a 4-ohm, 6.5-inch two-way component speaker system designed for upgrading factory front-stage audio. It combines an AP 6.5 woofer, AP 1 tweeter, APCX TW passive crossover, and included grilles. The system is intended for installations where separate woofer and tweeter locations can improve staging and detail over a basic full-range door speaker.\u003c\/p\u003e\u003cp\u003eWith 100 watts continuous power handling and 300 watts peak power handling, the APK 165 is suited to systems using an appropriate external amplifier or compatible amplified source. Its 60 Hz to 20 kHz frequency response covers the main midbass and high-frequency range for a component front stage. The woofer's 93.5 dB SPL specification supports effective output from moderate-power car-audio amplification.\u003c\/p\u003e\u003cp\u003eThe AP 6.5 woofer uses a 32 mm pure-copper voice coil, a water-repellent treated paper cone, and a TPU surround with Audison's shallow Triple Wave profile. This combination is engineered for controlled low-frequency reproduction and linear cone travel. The woofer has a listed maximum linear excursion of ±2.5 mm and an 80 Hz resonant frequency.\u003c\/p\u003e\u003cp\u003eThe AP 1 tweeter uses a 26 mm diaphragm with a wide-roll surround and an acoustic lens. The lens is designed to help address response effects in the 10 kHz to 13 kHz range that can occur when a tweeter is mounted behind restrictive factory grilles. This makes the system especially relevant for OEM-style mounting locations as well as exposed A-pillar placements.\u003c\/p\u003e\u003cp\u003eAn APCX TW passive high-pass crossover is included to direct high frequencies to the tweeter. Its selectable 0 dB and +2 dB level settings allow adjustment for different tweeter mounting conditions. The APK 165 can serve as the front component stage in a larger system with rear fill, a dedicated amplifier, DSP processing, and a subwoofer for deeper bass.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Component System:\u003c\/strong\u003e Separate woofer and tweeter support more flexible speaker placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Continuous Handling:\u003c\/strong\u003e Matches appropriately powered 4-ohm amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAPCX TW Crossover:\u003c\/strong\u003e Provides a high-pass network for the tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Tweeter Level:\u003c\/strong\u003e Choose 0 dB or +2 dB output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Supports use in vehicle door locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Style Fast-On Terminals:\u003c\/strong\u003e Helps simplify woofer connection during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 6.5 woofer uses a compact, abrasion-resistant and scratch-resistant coated basket, with the motor secured using damping epoxy adhesive. Its treated paper cone is paired with a thermoplastic polyurethane surround, while the tweeter incorporates a wide-roll surround and acoustic lens. Included grilles provide an additional finishing option where the speakers are not concealed by factory trim.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's available 165 mm speaker opening, mounting depth, mounting-hole pattern, and tweeter location before installation. Use the supplied passive crossover between the signal source or amplifier and the tweeter, selecting 0 dB for an A-pillar installation without an added grille or +2 dB when the tweeter is installed behind an OEM grille. The woofer's high-current fast-on terminals use double contacts on both positive and negative poles for connection flexibility.\u003c\/p\u003e","brand":"AUDISON","offers":[{"title":"Default Title","offer_id":45771454906559,"sku":"APK165","price":233.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81IO11vf2SL_7da56cf0-d3e5-459f-b3e0-f20f8baf8d38.jpg?v=1782363053"},{"product_id":"audison-apk165p","title":"Audison APK165P 6.5\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Audison APK165P is a 6.5-inch, 2-way component speaker system for upgrading front-stage sound in compatible vehicle locations. It pairs separate AP 6.5P woofers with AP 1P tweeters and dedicated passive crossover modules. The system is designed for installations where the woofer and tweeter are mounted separately rather than in a single coaxial speaker location.\u003c\/p\u003e\u003cp\u003eWith a 4-ohm nominal impedance, 115-watt continuous power handling, and 345-watt peak power handling, this system is suited to aftermarket audio systems using a compatible head unit or external amplifier. Its 50 Hz to 24 kHz stated system frequency response covers bass and midrange from the door woofer through high frequencies from the separate tweeter. The 92.5 dB SPL system sensitivity rating supports efficient output from properly matched equipment.\u003c\/p\u003e\u003cp\u003eThe AP 6.5P woofer uses a water-repellent treated paper cone and a 32 mm CCAW voice coil. Its 5.6 mm Xmax specification and compact basket are intended to support factory-style door mounting locations. The AP 1P tweeter uses a 29 mm Tetolon fibre dome with a 25 mm CCAW voice coil.\u003c\/p\u003e\u003cp\u003eAudison's AIF, or Any Install Faceplate, system gives the AP 1P tweeter interchangeable mounting options. Three mounting accessories are supplied to support different installation approaches, helping accommodate common factory tweeter locations and custom placements. The tweeter's double-neodymium magnetic assembly and FEM-optimized dome profile are engineered for high-frequency extension and off-axis dispersion.\u003c\/p\u003e\u003cp\u003eSeparate compact crossover modules divide the signal between the woofer and tweeter. The woofer low-pass filter is specified at 4 kHz with a 6 dB\/octave slope, while the tweeter high-pass filter is 4 kHz with a 12 dB\/octave slope. This makes the APK165P a practical component set for a front-speaker upgrade built around compatible 4-ohm amplification and proper vehicle-specific mounting hardware.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Component System:\u003c\/strong\u003e Separate 6.5-inch woofers and 29 mm tweeters allow dedicated placement of each driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e115 W Continuous Handling:\u003c\/strong\u003e Supports use with properly matched aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAIF Tweeter Mounting:\u003c\/strong\u003e Interchangeable faceplates and supplied mounting accessories support varied mounting locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coils:\u003c\/strong\u003e Copper-clad aluminum wire voice coils are used in both woofer and tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Crossover Network:\u003c\/strong\u003e Separate compact woofer and tweeter crossover modules simplify signal routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e The AP 6.5P woofer cone is treated for automotive speaker use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 6.5P woofer combines a treated paper cone, 32 mm CCAW voice coil, compact basket, and a 100 x 40 x 18 mm magnetic assembly. The AP 1P tweeter uses a Tetolon fibre dome, 25 mm CCAW voice coil, and double-neodymium magnetic assembly. The system also provides a selectable tweeter level setting of 0 dB or +3 dB at the crossover.\u003c\/p\u003e\u003cp\u003eConfirm door opening diameter, mounting depth, and clearance behind the panel before installation; the AP 6.5P lists a 141 mm cutout diameter and 66.5 mm mounting depth. Route each channel through its assigned passive crossover rather than connecting the tweeter directly to a full-range amplifier output. Secure all components firmly, use the appropriate faceplate and mounting accessory for the tweeter location, and confirm polarity before reassembling vehicle trim.\u003c\/p\u003e","brand":"AUDISON","offers":[{"title":"Default Title","offer_id":45771454939327,"sku":"APK165P","price":274.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71KYClkNHCL.jpg?v=1782363055"}],"url":"https:\/\/nsidistributor.com\/collections\/component-speakers.oembed?page=3","provider":"NSI Audio Distributing","version":"1.0","type":"link"}