{"title":"6x9 Inch Speakers","description":null,"products":[{"product_id":"gravity-wzp69-warzone-series-6x9-inch-4-ohm-pro-midrange-coaxial-loud-corrugated-surround-speaker-4-ohms-with-800w-max-1-speaker-car-audio-high-standard-reliability-testing","title":"WARZONE WZP69 6x9\" Pro Midrange Coaxial Speaker","description":"\u003cp\u003eThe WARZONE WZP69 is a 6 x 9-inch pro midrange coaxial speaker designed for car-audio systems that need strong, clear vocal and instrument reproduction. Its 4-ohm design supports use with compatible aftermarket amplification and speaker wiring. The speaker is intended for enthusiasts building or upgrading a vehicle sound system with dedicated midrange coverage.\u003c\/p\u003e\u003cp\u003eWith a stated 800-watt maximum power rating and 95 dB sensitivity, the WZP69 is built to deliver assertive output from an appropriately matched system. Its stated 85 Hz to 22 kHz frequency response covers a broad midrange-to-high-frequency range. The coaxial configuration helps consolidate that coverage into a single 6 x 9-inch speaker location.\u003c\/p\u003e\u003cp\u003eThe WZP69 uses a corrugated surround and an oversized magnet motor structure to support its pro-audio-oriented construction. A 25-ounce high-energy magnet is specified for the speaker. These components are intended to provide stable operation in demanding mobile-audio installations.\u003c\/p\u003e\u003cp\u003eThis speaker is a practical option for systems using 6 x 9-inch mounting locations or custom speaker panels. Its 4-ohm impedance should be matched with an amplifier or head-unit channel rated to operate at 4 ohms. Because the listed 800-watt figure is a maximum rating, amplifier selection should be based on confirmed continuous-power specifications where available.\u003c\/p\u003e\u003cp\u003eFor a more complete system, the WZP69 can be used alongside dedicated low-frequency speakers or subwoofers for bass support. Its stated frequency range begins at 85 Hz, so system tuning and crossover choices should reflect the vehicle, installation position, and other speakers in use. Verify cutout dimensions and mounting clearance before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 x 9-Inch Pro Speaker:\u003c\/strong\u003e Fits applications designed for 6 x 9-inch car-audio drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoaxial Design:\u003c\/strong\u003e Combines midrange-oriented coverage in one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e800W Maximum Power:\u003c\/strong\u003e Supports high-output system designs with proper matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible 4-ohm amplifier or receiver channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e95 dB Sensitivity:\u003c\/strong\u003e Helps produce strong output from available amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25-Ounce Magnet:\u003c\/strong\u003e Supports the speaker's oversized magnet motor structure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZP69 features a corrugated speaker surround, 25-ounce high-energy magnet, and oversized magnet motor structure. Its pro midrange coaxial format is designed for vehicle audio use and is listed as having undergone high-standard reliability testing. The nominal basket measures 9.29 by 6.56 inches.\u003c\/p\u003e\u003cp\u003eConfirm the 8.82 by 6.04-inch mounting opening and 4.21-inch mounting-depth requirement before purchasing. Connect it to a compatible 4-ohm speaker channel, observe amplifier and crossover manufacturer guidance, and ensure the installation location has adequate rear clearance. The product is listed as one speaker, so a left-and-right installation requires two units.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":43915376230591,"sku":"704129655676","price":42.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/813NWV_zzaL.jpg?v=1735599764"},{"product_id":"warzone-wz69mk-6x9-inch-2-way-marine-speaker-1200w-max-4-ohms-20oz-magnet-black-injection-cone-with-rubber-edge-for-boats-and-outdoor-audio-2-speakers","title":"Warzone WZ69MK 6x9-Inch 2-Way Marine Speakers","description":"\u003cp\u003eThe Warzone WZ69MK is a pair of 6x9-inch, 2-way marine speakers designed for boats and outdoor audio installations. It provides a weather-resistant speaker option for replacing worn factory speakers or adding sound to a marine, patio, or RV system. The pair uses a 4-ohm impedance for connection to compatible car or marine audio equipment.\u003c\/p\u003e\u003cp\u003eIts stated 50Hz-20kHz frequency response is intended to cover bass, midrange, and high-frequency content from a single speaker location. With a listed sensitivity of 90dB, the WZ69MK is designed to produce usable output in open-air environments where background noise can be a factor. The 2-way layout supports a balanced presentation without requiring separate component speaker mounting.\u003c\/p\u003e\u003cp\u003eThe WZ69MK is rated at up to 1200 watts maximum power, with a listed rated-power figure of 420 watts. Use an amplifier or receiver that is compatible with 4-ohm speakers and set gain carefully to suit the system. Power ratings should be considered alongside the capabilities of the connected source and amplifier.\u003c\/p\u003e\u003cp\u003eA black polypropylene injection cone and rubber edge form the main moving assembly. The rubber edge is designed to support cone movement while the polypropylene cone provides a durable diaphragm material for outdoor use. A 20-ounce strontium magnet and 1.2-inch voice coil are part of the speaker motor system.\u003c\/p\u003e\u003cp\u003eFor marine and exterior applications, the speakers use a black plastic basket and weather-resistant construction. The product is described for exposure associated with water, salt, and UV conditions, making it suited to appropriately protected speaker locations on boats and outdoor systems. The package is listed as a two-speaker set for a matched left\/right installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Speaker Size:\u003c\/strong\u003e Fits systems designed for nominal 6x9-inch speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Design:\u003c\/strong\u003e Covers a broad range of music frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible marine and car audio equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1200W Maximum Power:\u003c\/strong\u003e Supports higher-output system designs when properly matched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Uses a durable black injection cone with rubber edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Oriented Construction:\u003c\/strong\u003e Weather-resistant materials suit boat and outdoor installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ69MK combines a black polypropylene injection cone, rubber edge, black plastic basket, 20-ounce strontium magnet, and 1.2-inch voice coil. Its materials and construction are described for weather-resistant use, including marine and outdoor environments. The black finish gives the pair a coordinated appearance for installations where exposed speakers are visible.\u003c\/p\u003e\u003cp\u003eConfirm the available mounting opening, mounting depth, grille clearance, and screw pattern before installation, as specific cutout and depth measurements are not published in the confirmed product information. Wire each speaker to a compatible 4-ohm amplifier or receiver while observing polarity, then set amplifier gain conservatively. The pair can be used for boat panels, RV installations, or protected outdoor audio locations.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":44329033498815,"sku":"B0DT7TGHWR","price":74.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71cGkQOgBXL.jpg?v=1749684476"},{"product_id":"warzone-wz69si-6x9-inch-mid-range-driver-speaker-1200w-max-4-ohms-30oz-magnet-black-steel-basket-with-aluminum-dome-tweeter-for-car-audio-single","title":"Warzone WZ69Si 6x9\" Midrange Speaker with Tweeter","description":"\u003cp\u003eThe Warzone WZ69Si is a single 6x9-inch car-audio midrange speaker with an integrated aluminum dome tweeter. It is intended for listeners building or upgrading a vehicle sound system that needs dedicated midrange presence and extended high-frequency output. Its 4-ohm impedance supports use with compatible car-audio amplification.\u003c\/p\u003e\u003cp\u003eRated at 320 watts with a stated 1,200-watt peak-power handling figure, the WZ69Si is designed for amplified systems rather than low-power factory-radio operation alone. The speaker covers a published 90 Hz to 20 kHz frequency range. This makes it suited to applications where vocal, instrument, and treble detail are important parts of the system balance.\u003c\/p\u003e\u003cp\u003eA 50 mm aluminum dome tweeter is included to reproduce upper-frequency detail alongside the main driver. The combined design offers a compact way to add midrange and high-frequency coverage in a 6x9-inch speaker location. For full-range systems, a separate subwoofer may still be used to handle the lowest bass frequencies below the speaker's stated response range.\u003c\/p\u003e\u003cp\u003eThe WZ69Si uses a 30-ounce high-density-flux ferrite magnet and a 1.5-inch (38 mm) voice coil. These components support the speaker's stated power handling and are paired with a 92 dB sensitivity rating. The published specifications position it for custom car-audio installations using an appropriately matched amplifier.\u003c\/p\u003e\u003cp\u003eIts steel basket, press-paper cone, and cloth edge combine traditional speaker materials in a purpose-built automotive format. The black finish helps it blend into many custom door-panel, rear-deck, or fabricated speaker installations. Verify available mounting clearance, cutout dimensions, and vehicle-specific fitment before purchase, as those measurements are not published for this model.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Format:\u003c\/strong\u003e Fits applications designed for a 6x9-inch speaker footprint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e320W Rated Power:\u003c\/strong\u003e Supports use in appropriately amplified car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with amplifiers rated for 4-ohm speaker loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 mm Aluminum Dome Tweeter:\u003c\/strong\u003e Adds dedicated high-frequency reproduction to the speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFerrite Magnet:\u003c\/strong\u003e Uses a 30-ounce high-density-flux ferrite magnet system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90 Hz–20 kHz Response:\u003c\/strong\u003e Covers the published midrange and high-frequency operating range.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ69Si is built around a black steel basket, black press-paper cone, cloth edge, and ferrite magnet assembly. Its 1.5-inch voice coil and aluminum dome tweeter are integrated into a single 6x9-inch speaker unit. The unit is specified as a non-waterproof car-audio speaker.\u003c\/p\u003e\u003cp\u003eUse this speaker in a properly sized 6x9-inch mounting location with sufficient rear clearance and a compatible 4-ohm amplifier channel. Match amplifier gain and crossover settings carefully to the system and avoid exceeding the speaker's rated 320-watt power specification. The product is sold as a single speaker; confirm any needed mounting hardware, wiring, grilles, and installation accessories separately.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":44329039954111,"sku":"B0DT84XHXT","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71THhDOWMAL.jpg?v=1749684580"},{"product_id":"warzone-2x-wz69pti-6x9-inch-super-coaxial-speaker-pair-4-ohm-650w-max-200w-rms-92db-sensitivity-ferrite-woofer-pei-dome-tweeter-for-pro-car-audio","title":"Warzone WZ69PTi 6x9\" Two-Way Coaxial Speakers","description":"\u003cp\u003eThe Warzone WZ69PTi is a pair of 6x9-inch coaxial car speakers designed to replace or upgrade factory door or rear-deck speakers. Its 4-ohm design is suited to common aftermarket and factory-style car-audio applications where a full-range speaker is needed. The pair combines woofer and tweeter elements in each speaker to provide a compact, integrated solution.\u003c\/p\u003e\u003cp\u003eWith 650 watts maximum and 200 watts RMS system power handling, the WZ69PTi is intended for systems that need more output capability than basic replacement speakers. Its 92 dB sensitivity supports efficient operation from a compatible head unit or external amplifier. Matching amplifier output to the RMS rating is the practical approach for system planning.\u003c\/p\u003e\u003cp\u003eThe two-way coaxial arrangement uses a glass-fiber woofer cone for the lower and middle frequency range, paired with a 50 mm PEI dome tweeter for upper-frequency reproduction. A built-in 4 kHz crossover divides the signal between the drivers. This integrated layout helps keep installation straightforward while retaining dedicated high-frequency reproduction.\u003c\/p\u003e\u003cp\u003eThe WZ69PTi has a stated frequency response of 52 Hz to 20 kHz and uses a 20-ounce ferrite magnet structure. These specifications make it suitable for listeners seeking a broad full-range response from a 6x9-inch speaker location. It can be used as part of a front-stage, rear-fill, or full speaker replacement upgrade, depending on vehicle fitment and system design.\u003c\/p\u003e\u003cp\u003eBefore installation, confirm the vehicle's factory opening, mounting depth, and panel clearance. The speaker's listed frame dimensions, cutout requirements, and 3.15-inch mounting depth provide useful fitment references. Because this is a passive speaker pair, it requires connection to compatible speaker-level amplifier or receiver outputs.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer and tweeter drivers in each 6x9-inch speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200W RMS System Handling:\u003c\/strong\u003e Supports amplifier matching based on the pair's continuous-power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass-Fiber Woofer Cone:\u003c\/strong\u003e Provides the primary low- and mid-frequency driver surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 mm PEI Dome Tweeter:\u003c\/strong\u003e Handles high-frequency detail within the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 kHz Built-In Crossover:\u003c\/strong\u003e Directs appropriate frequencies to the woofer and tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92 dB Sensitivity:\u003c\/strong\u003e Helps produce usable output with compatible car-audio power.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ69PTi uses a glass-fiber woofer cone, PEI dome tweeter, and ferrite magnet assembly. Its coaxial architecture places the high-frequency driver within the woofer assembly, allowing both drivers to fit within a conventional 6x9-inch speaker footprint. The passive design does not include onboard amplification.\u003c\/p\u003e\u003cp\u003eVerify the 4.65 by 6.62-inch cutout, 6.45 by 9.33-inch overall frame size, and 3.15-inch mounting depth against the vehicle before purchase. Connect each speaker to a compatible 4-ohm speaker channel and observe polarity during wiring. For amplified systems, select amplifier power with the 200-watt RMS system rating in mind rather than the maximum-power figure.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":45613514784959,"sku":"783501184256","price":64.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81kvgM_FCfL.jpg?v=1777926641"},{"product_id":"warzone-wz-e693-6x9-coaxial-car-speakers-950w-max-power-4-ohm-full-range-audio-pei-dome-tweeter-shallow-mount-design-perfect-for-oem-replacement","title":"Warzone WZ-E693 6x9\" Coaxial Car Speakers","description":"\u003cp\u003eThe Warzone WZ-E693 is a 6x9-inch coaxial car-speaker model designed for full-range vehicle audio reproduction. It is intended for drivers replacing factory 6x9 speakers or building an aftermarket system around conventional speaker locations. Its 4-ohm impedance supports use with compatible car stereos or external amplification.\u003c\/p\u003e\u003cp\u003eThis model is specified at 950 watts maximum power and 475 watts RMS power. Its stated 52 Hz–20 kHz frequency response is designed to cover bass, midrange, and high-frequency content through a single coaxial speaker assembly. The 4 kHz crossover point is intended to divide frequencies between the woofer and integrated tweeter.\u003c\/p\u003e\u003cp\u003eA 2.3-inch PEI dome tweeter is integrated into the speaker design for high-frequency reproduction. The woofer uses a 1.2-inch voice coil, while a ferrite magnet is specified for the motor structure. Together, these components make the WZ-E693 a full-range coaxial alternative to basic factory speakers.\u003c\/p\u003e\u003cp\u003eThe WZ-E693 is designed around a shallow 3.66-inch mounting depth for installations where rear-deck or door-panel clearance is limited. Its listed overall dimensions are 6.45 by 9.33 inches, with a 5.95 by 8.52-inch cutout requirement. Vehicle-specific fitment should still be checked before purchase because factory brackets, grilles, and mounting patterns vary.\u003c\/p\u003e\u003cp\u003eFor an OEM-replacement-style upgrade, the WZ-E693 can be paired with a compatible 4-ohm head unit or amplifier. Matching the system's available power and confirming mounting depth are important before installation. It is suited to systems seeking 6x9 coaxial speakers with an integrated tweeter rather than separate component speakers.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter functions in one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Supports compatibility with typical 4-ohm mobile-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e950W Maximum Power:\u003c\/strong\u003e Provides the stated maximum power-handling specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e475W RMS Rating:\u003c\/strong\u003e Lists continuous power handling for system matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Uses a 2.3-inch PEI dome for high-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow 3.66-Inch Depth:\u003c\/strong\u003e Helps fit locations with limited mounting clearance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ-E693 uses a coaxial layout with a 1.2-inch woofer voice coil, 2.3-inch PEI dome tweeter, and ferrite magnet. This arrangement places the high-frequency driver within the 6x9 speaker assembly, reducing the need for a separate tweeter location. The published frequency response is 52 Hz to 20 kHz, with a 4 kHz crossover point.\u003c\/p\u003e\u003cp\u003eBefore installation, compare the vehicle's available opening with the listed 5.95 by 8.52-inch cutout size and verify that 3.66 inches of mounting depth is available. Confirm the factory mounting pattern, terminal connection method, and grille clearance, as these details are vehicle dependent. Use the speakers with compatible 4-ohm wiring and audio equipment, and match amplifier power carefully to the published ratings.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":45613517603007,"sku":"783501186953","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71u3xODreRL.jpg?v=1777926769"},{"product_id":"audio360-ad6915p-6x9-4-way-coaxial-car-speakers-1000w-max-power-high-efficiency-output-perfect-for-factory-upgrades","title":"AUDIO360 AD6915P 6x9\" 4-Way Coaxial Car Speakers","description":"\u003cp\u003eThe AUDIO360 AD6915P is a 6x9-inch 4-way coaxial car speaker designed for factory-location upgrades in vehicles with compatible 6x9 mounting positions. It provides an all-in-one speaker configuration for replacing worn or underperforming door or rear-deck speakers. Its 4-ohm design supports use with many aftermarket head units and amplifiers.\u003c\/p\u003e\u003cp\u003eThis model is intended for drivers who want fuller output and stronger midbass from a factory-sized speaker location. The stated 92 dB sensitivity helps it produce substantial output from available amplifier power. It is suited to everyday listening systems as well as custom car-audio installations using 6x9 speaker locations.\u003c\/p\u003e\u003cp\u003eThe AD6915P is rated at 1000 watts maximum power and 500 watts RMS. Proper power matching remains important, so amplifier output and gain settings should be selected carefully for the speaker system. A compatible amplifier can help provide controlled output when higher volume is desired.\u003c\/p\u003e\u003cp\u003eAn injection-molded cone and rubber surround form the speaker's primary moving assembly. This construction is intended to support cone control and durability during regular vehicle use. The coaxial layout places multiple drivers within the 6x9 speaker format for broad sound coverage from a single mounting location.\u003c\/p\u003e\u003cp\u003eWith a 3.54-inch mounting depth and an 8.58 x 5.87-inch cutout requirement, the AD6915P should be measured against the vehicle's available space before purchase. It can be used in compatible doors, rear decks, or custom panels. Vehicle-specific mounting adapters, wiring harnesses, or hardware may be needed depending on the installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Format:\u003c\/strong\u003e Fits compatible factory-size speaker locations and custom panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Way Coaxial Design:\u003c\/strong\u003e Combines multiple drivers within one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1000W Maximum Power:\u003c\/strong\u003e Provides stated high-output power-handling capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Rating:\u003c\/strong\u003e Supports power matching with compatible amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92 dB Sensitivity:\u003c\/strong\u003e Helps deliver strong output from available power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with many aftermarket radios and amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD6915P uses an injection-molded cone with a rubber surround. These materials are specified to support cone control and long-term durability. Its 4-way coaxial construction consolidates the speaker elements into a single 6x9-inch assembly.\u003c\/p\u003e\u003cp\u003eConfirm both the 3.54-inch mounting depth and 8.58 x 5.87-inch cutout dimensions against the intended location before installation. Use vehicle-appropriate brackets, wiring adapters, and mounting hardware where required; their inclusion is not confirmed. For amplified systems, match the amplifier configuration to the 4-ohm speaker load and set gains conservatively.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":45613555744959,"sku":"783501184386","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81C2zDpDq9L.jpg?v=1777930186"},{"product_id":"stx-audio-1200w-6x9-inch-4-way-car-audio-coaxial-speakers-system-6x9-inches","title":"STX Audio STX-694 6x9\" 4-Way Coaxial Speakers, 2 Pairs","description":"\u003cp\u003eThe STX Audio STX-694 package supplies two pairs of 6x9-inch coaxial car speakers for replacing worn factory speakers or adding matching rear-deck and door speakers where 6x9 fitment is used. The package includes four speakers and is listed as a 4-way car-audio coaxial system. Each speaker uses a 4-ohm load, making the set suited to conventional car-audio speaker wiring.\u003c\/p\u003e\u003cp\u003eThis bundle is intended for drivers who need coverage for four speaker locations rather than a single replacement pair. It can be used with a factory head unit or with a multichannel amplifier, depending on the vehicle and system plan. Confirm the vehicle's opening, mounting depth, and wiring arrangement before purchase, as vehicle-specific fitment information is not provided.\u003c\/p\u003e\u003cp\u003eSTX lists 150 watts RMS and 600 watts maximum power per speaker. That equals 300 watts RMS and 1,200 watts maximum for one pair, while this two-pair package totals 600 watts RMS and 2,400 watts maximum when calculated across all four speakers. Use an amplifier or receiver that is appropriate for 4-ohm speakers and set gains carefully.\u003c\/p\u003e\u003cp\u003eThe speaker construction combines a polypropylene woofer with a silk-dome tweeter in a coaxial form factor. A moisture-resistant rubber surround supports the woofer assembly, while the stamped-steel basket is described as anti-resonant. These elements are intended to provide a practical replacement-speaker design with integrated high-frequency reproduction.\u003c\/p\u003e\u003cp\u003eSpade speaker terminals simplify connection to compatible vehicle wiring or adapter leads. The STX-694 can serve as a four-speaker upgrade on its own or as part of a broader system with a multichannel amplifier and separate bass support. Because no vehicle application guide is supplied with the product data, installation should be planned around the vehicle's actual 6x9-inch locations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Pair Package:\u003c\/strong\u003e Includes four STX-694 6x9-inch speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches common car-audio speaker circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoaxial Layout:\u003c\/strong\u003e Combines woofer and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Handling:\u003c\/strong\u003e Rated at 150 watts RMS per speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer:\u003c\/strong\u003e Provides the main low- and midrange driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpade Terminals:\u003c\/strong\u003e Allow direct connection to compatible speaker wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe STX-694 uses a polypropylene woofer, silk-dome tweeter, moisture-resistant rubber surround, and stamped-steel basket. Its coaxial construction places the high-frequency driver with the woofer, reducing the need for separately mounted tweeters. The speakers are listed in black and use a nominal 6x9-inch format.\u003c\/p\u003e\u003cp\u003eCheck the factory speaker opening, mounting depth, grille clearance, and connector style before installation. Connect each speaker as a 4-ohm load using the provided spade terminals or suitable vehicle-specific adapters. The speakers may be operated from a factory head unit or a properly matched multichannel amplifier; avoid exceeding their stated power ratings.\u003c\/p\u003e","brand":"STX AUDIO","offers":[{"title":"Default Title","offer_id":45613585727679,"sku":"783501106272","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/814m2IFwqcL.jpg?v=1777933448"},{"product_id":"stx-audio-x69-2r-6x9-midrange-speaker-950-watts-max-power-4-ohm-91-db-sensitivity-high-capacitor-black-press-paper-cone-with-red-grills-for-car-audio","title":"STX Audio X69.2R 6x9\" Midrange Speakers","description":"\u003cp\u003eThe STX Audio X69.2R is a 6x9-inch car-audio midrange speaker designed to add focused vocal and instrument presence to a vehicle sound system. It is intended for listeners upgrading a factory system or building a multi-speaker setup that needs stronger midrange output. Its 4-ohm nominal impedance supports integration with compatible car-audio amplification and speaker wiring.\u003c\/p\u003e\u003cp\u003eThis model is rated for up to 950 watts of maximum power and has a stated sensitivity of 91 dB. The published 88 Hz to 20 kHz frequency-response range covers a broad portion of the audible midrange and upper-frequency range. Because no RMS power rating is published for this model, amplifier matching should be based on verified continuous-power information rather than the maximum-power figure alone.\u003c\/p\u003e\u003cp\u003eThe X69.2R uses a black pressed-paper cone and is presented as a midrange-focused design. A high capacitor is specified for the midrange section, intended to support cleaner signal handling in its intended operating range. This makes it a practical choice for systems where midrange detail is a priority.\u003c\/p\u003e\u003cp\u003eRed protective grilles are included to help shield the speaker cones from incidental contact while adding a coordinated appearance to visible installations. The red-and-black presentation suits custom door, rear-deck, and panel installations where the speaker may remain exposed. The grilles should not be treated as a substitute for secure mounting or proper placement away from moisture.\u003c\/p\u003e\u003cp\u003eThe X69.2R fits an upgrade path that can include a compatible amplifier, source unit, and complementary bass or high-frequency speakers as needed. It is a midrange speaker rather than a confirmed full-system solution, so system balance depends on the other components selected. Confirm vehicle fitment, mounting depth, cutout dimensions, and available amplifier power before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Format:\u003c\/strong\u003e Fits applications designed for 6x9-inch car speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e950W Maximum Power:\u003c\/strong\u003e Published maximum-power handling for amplified car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Supports use with compatible 4-ohm speaker outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e91 dB Sensitivity:\u003c\/strong\u003e Indicates stated output efficiency under the manufacturer’s test rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Capacitor Design:\u003c\/strong\u003e Specified to support the speaker’s midrange-focused performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Protective Grilles:\u003c\/strong\u003e Help protect exposed speakers and complete the installed appearance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe X69.2R combines a black pressed-paper cone with red protective grilles for a purposeful car-audio appearance. Its 6x9-inch oval frame is intended for car-audio speaker locations that accept this size. The published item dimensions are 22 x 15 x 9 cm, though vehicle-specific mounting measurements are not confirmed.\u003c\/p\u003e\u003cp\u003eBefore purchase, compare the vehicle’s available opening, mounting depth, mounting-hole pattern, and panel clearance with the actual speaker. Use compatible 4-ohm amplification or speaker outputs, observe polarity during wiring, and secure the grilles after the speakers are mounted. For a balanced system, pair the speakers with components appropriate for the desired bass and high-frequency coverage.\u003c\/p\u003e","brand":"STX AUDIO","offers":[{"title":"Default Title","offer_id":45613591560383,"sku":"783501155546","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81LLb35J9iL.jpg?v=1777934730"},{"product_id":"stx-audio-x69-2b-6x9-midrange-speaker-950-watts-max-power-4-ohm-91-db-sensitivity-high-capacitor-black-press-paper-cone-with-black-grills-for-car-audio","title":"STX Audio X69.2B 6x9\" Midrange Car Speaker","description":"\u003cp\u003eThe STX Audio X69.2B is a 6x9-inch wired midrange speaker intended for car-audio upgrades where clearer vocal and instrument reproduction is a priority. It is rated at 4 ohms and is designed to integrate with compatible aftermarket car-audio systems. Its listed 950-watt maximum-power rating describes peak handling rather than a confirmed continuous RMS rating.\u003c\/p\u003e\u003cp\u003eThis speaker is aimed at listeners building a system with dedicated midrange coverage rather than relying only on factory full-range speakers. The published frequency response is 88 Hz to 20 kHz, covering much of the vocal and upper-frequency range. A listed sensitivity of 91 dB supports efficient output when it is matched with suitable amplification.\u003c\/p\u003e\u003cp\u003eThe X69.2B uses a black press-paper cone, a common lightweight cone material used for responsive sound reproduction. Its design is focused on midrange performance, helping bring dialogue, vocals, guitars, horns, and percussion forward in a vehicle audio system. It is a wired speaker and is intended for automotive use.\u003c\/p\u003e\u003cp\u003eSTX Audio lists a high capacitor as part of the speaker design for its midrange application. The available product information does not provide capacitor value, crossover slope, or detailed crossover specifications, so system tuning should be based on the specifications of the connected amplifier or processor. Avoid treating the published maximum-power figure as an amplifier-matching recommendation.\u003c\/p\u003e\u003cp\u003eProtective black grills are included to help shield the cone area from incidental contact after installation. The speaker is listed for door mounting, although vehicle-specific fitment, cutout dimensions, and mounting depth should be checked before purchase. It can serve as part of a larger car-audio upgrade with compatible wiring, amplification, and frequency management.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Midrange Format:\u003c\/strong\u003e Fits applications designed for 6x9-inch car speakers, subject to vehicle fitment verification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e950W Maximum Power:\u003c\/strong\u003e Published peak power-handling rating for the speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible 4-ohm car-audio amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e91 dB Sensitivity:\u003c\/strong\u003e Published sensitivity rating for efficient output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e88 Hz–20 kHz Response:\u003c\/strong\u003e Covers a broad listed midrange and upper-frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective Black Grills:\u003c\/strong\u003e Included grills help protect the speaker after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe X69.2B combines a black press-paper cone with a black finish and included protective grills. It is listed as a non-waterproof, wired midrange speaker for car-audio use. The published product information identifies door mounting as its intended mounting style.\u003c\/p\u003e\u003cp\u003eConfirm your vehicle's 6x9-inch opening, available mounting depth, connector arrangement, and mounting hardware requirements before installation; cutout and depth measurements were not confirmed in the available product data. Match the speaker only to amplification and crossover settings appropriate for a 4-ohm midrange driver, and use the protective grills where the speaker may be exposed to contact.\u003c\/p\u003e","brand":"STX AUDIO","offers":[{"title":"Default Title","offer_id":45613591658687,"sku":"783501155553","price":89.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81l2BeYtKrL.jpg?v=1777934749"},{"product_id":"pair-gravity-6x9-inch-4-way-380-watts-coaxial-car-speakers-cea-rated-6996h","title":"Gravity GR-6996H 6x9\" 4-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Gravity GR-6996H is a pair of 6x9-inch, 4-way coaxial car speakers intended to replace compatible factory door or rear-deck speakers. It provides a practical option for drivers whose original speakers have become worn, quiet, or distorted. The 4-ohm design is suited to typical automotive speaker circuits.\u003c\/p\u003e\u003cp\u003eThese speakers use a 4-way coaxial layout to combine multiple driver elements within each 6x9-inch assembly. Their published 30 Hz to 22 kHz frequency response is designed to cover bass, midrange, and high-frequency content from a single speaker location. A 92 dB sensitivity rating supports efficient output with compatible factory radios or aftermarket amplification.\u003c\/p\u003e\u003cp\u003eGravity lists peak power handling of 380 watts total for the pair, with 175 watts peak per speaker. Peak ratings describe short-duration handling rather than continuous power, so amplifier selection should be based on the amplifier's actual output and clean setup. RMS power handling is not published for this model.\u003c\/p\u003e\u003cp\u003eThe GR-6996H uses silver alpha cellulose cones with moisture-resistant rubber surrounds. A Neo Mylar soft-dome tweeter is integrated into the coaxial design for high-frequency reproduction. The speaker assembly also includes a 20-ounce magnet and 25 mm voice coil.\u003c\/p\u003e\u003cp\u003eFor an upgrade path, the GR-6996H can be used with a compatible 4-ohm factory head unit or aftermarket amplifier. Its spade terminals simplify speaker-wire connection, while the stamped-steel basket supports the driver structure. Confirm vehicle-specific 6x9-inch fitment, mounting depth, mounting-hole pattern, and clearance before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Coaxial Format:\u003c\/strong\u003e Fits applications designed for compatible 6x9-inch car speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Way Speaker Design:\u003c\/strong\u003e Combines multiple driver elements in each speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches the common nominal impedance used in car audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92 dB Sensitivity:\u003c\/strong\u003e Supports efficient output from compatible source units or amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilver Alpha Cellulose Cone:\u003c\/strong\u003e Provides the primary cone material for the woofer section.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30 Hz–22 kHz Response:\u003c\/strong\u003e Published range covers low, midrange, and high frequencies.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GR-6996H combines silver alpha cellulose cones, moisture-resistant rubber surrounds, a Neo Mylar soft-dome tweeter, and an anti-resonant stamped-steel basket. Each speaker uses a 25 mm voice coil and 20-ounce magnet structure. These construction details are intended for automotive use where vibration and changing cabin conditions are common.\u003c\/p\u003e\u003cp\u003eUse the supplied speaker wire, screws, and spade-terminal connections as appropriate for the vehicle and installation. Verify that the vehicle accepts 6x9-inch speakers and check mounting depth, grille clearance, terminal clearance, and mounting-hole alignment before ordering or cutting. Match polarity at both speakers and avoid exceeding the speakers' published peak-power claims with a distorted or improperly adjusted signal.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":45625186222271,"sku":"704129660038","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81gln7yedNL.jpg?v=1778539129"},{"product_id":"gravity-sgr694-6x9-inch-4-way-600-watts-maximum-power-handling-car-audio-full-range-speakers-alpha-solid-rubber-cones-composition-4-ohms-94-db-sensitivity-pair","title":"Gravity SGR694 6x9\" 4-Way Full-Range Car Speakers","description":"\u003cp\u003eThe Gravity SGR694 is a pair of 6x9-inch, 4-way full-range car audio speakers designed as an upgrade for vehicles with compatible 6x9 speaker locations. They provide a replacement path for worn or limited factory speakers while retaining a conventional 4-ohm load. Their coaxial format combines multiple drivers into each speaker assembly.\u003c\/p\u003e\u003cp\u003eWith a stated frequency response of 110 Hz to 20 kHz and 94 dB sensitivity, the SGR694 is intended to reproduce a broad portion of the audible range with efficient output. The four-way arrangement is designed to distribute sound reproduction across its integrated driver elements. These speakers are suited to listeners seeking a straightforward full-range speaker upgrade.\u003c\/p\u003e\u003cp\u003eThe SGR694 is rated for up to 600 watts maximum power handling and uses a 4-ohm impedance. Match the speakers with an audio source or amplifier that is stable at 4 ohms, and set gain conservatively to avoid audible distortion. Actual output and bass performance will depend on the vehicle, speaker location, source unit, and installation quality.\u003c\/p\u003e\u003cp\u003eGravity specifies alpha solid rubber cone construction and moisture-resistant rubber surrounds for the speaker assemblies. An anti-resonant stamped steel basket supports the driver structure and is intended to help control unwanted vibration. Spade terminals provide a familiar connection method for car-audio wiring.\u003c\/p\u003e\u003cp\u003eEach package includes two SGR694 speakers, two wire harnesses, eight mounting screws, eight speed clips, and a warranty card. The included hardware can simplify a basic installation, but vehicle-specific adapters, mounting brackets, or wiring adapters may still be needed. Confirm mounting depth, opening dimensions, and connector fit before purchase.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Speaker Size:\u003c\/strong\u003e Fits vehicles with compatible 6x9-inch speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Way Full-Range Design:\u003c\/strong\u003e Integrates multiple driver elements in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with car audio equipment designed for 4-ohm speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e94 dB Sensitivity:\u003c\/strong\u003e Indicates efficient sound output from available amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber Cone and Surround:\u003c\/strong\u003e Uses alpha solid rubber cones and moisture-resistant surrounds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped Steel Basket:\u003c\/strong\u003e Provides a rigid mounting structure for the speaker assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe SGR694 uses alpha solid rubber cones, moisture-resistant rubber surrounds, and anti-resonant stamped steel baskets. This construction combines a resilient cone and surround material with a steel frame that supports the speaker assembly. The speakers use spade terminals for their electrical connections.\u003c\/p\u003e\u003cp\u003eVerify that the vehicle has a compatible 6x9-inch mounting location and at least 3-7\/8 inches of mounting depth before installation. Connect wiring with correct polarity, secure each speaker with the included screws and speed clips where appropriate, and test operation before reinstalling interior panels. The included wire harnesses may assist installation, though vehicle-specific fitment parts are not confirmed.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":45628075409599,"sku":"700987502176","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81FVqo-Vf9L.jpg?v=1778621198"},{"product_id":"pair-of-soundxtreme-6x9-520-watt-4-way-red-car-audio-stereo-coaxial-speakers-st694-2-speakers","title":"SoundXtreme ST-694 6x9\" 4-Way Coaxial Car Speakers","description":"\u003cp\u003eThe SoundXtreme ST-694 is a pair of 6x9-inch, 4-way coaxial car speakers designed for replacing compatible factory speakers or completing an aftermarket audio upgrade. Each pair combines a full-size oval woofer with dedicated midrange and tweeter elements in a single speaker assembly. Its 4-ohm load is suited to car audio head units and compatible external amplifiers.\u003c\/p\u003e\u003cp\u003eWith 140 watts RMS handling per pair and 520 watts peak handling per pair, the ST-694 is intended for systems that need more output capability than many original-equipment speakers. The rated 92 dB sensitivity supports useful output from modest-power sources when the system is set up properly. Its 30 Hz to 20 kHz frequency-response rating is designed to cover bass, midrange, and high-frequency content from one coaxial location.\u003c\/p\u003e\u003cp\u003eThe 6x9-inch polypropylene woofer cone provides the primary low- and mid-frequency foundation, while the polyester foam surround supports cone movement. A 2-inch midrange and 1\/2-inch PEI balanced-dome tweeter handle upper-frequency detail within the coaxial assembly. This layout makes the ST-694 a practical choice for listeners seeking a straightforward full-range speaker replacement.\u003c\/p\u003e\u003cp\u003eSoundXtreme specifies an aluminum 1-inch voice coil and an Electric Crystal Motor tweeter magnet. The speakers use spade terminals for conventional speaker-wire connections. Protective grilles are included, providing an option for exposed or custom installations.\u003c\/p\u003e\u003cp\u003eBefore ordering, compare the vehicle's available mounting opening and rear clearance with the ST-694's published cutout and depth measurements. The speakers can be connected to a compatible head unit or amplifier, but clean power and correct polarity are important for proper operation. They can serve as a rear-deck, door, or custom-installation upgrade where the mounting dimensions and clearance are suitable.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer, midrange, and tweeter elements into each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Woofer:\u003c\/strong\u003e Provides an oval cone area for full-range car audio use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e140W RMS Per Pair:\u003c\/strong\u003e Supports sustained playback within the published pair rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches many common car audio speaker outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides a durable woofer diaphragm material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Balanced-Dome Tweeter:\u003c\/strong\u003e Handles high-frequency reproduction in the coaxial assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ST-694 uses a polypropylene woofer cone, polyester foam woofer surround, PEI tweeter dome, and aluminum voice coil. Its coaxial layout places the midrange and tweeter components over the woofer, helping consolidate full-range reproduction into a 6x9-inch speaker location. Included grilles can help protect the speaker faces where clearance permits their use.\u003c\/p\u003e\u003cp\u003eVerify the 5-5\/8 x 8-7\/16-inch mounting cutout, 3-3\/16-inch bottom-mount depth, and 7\/16-inch top-mount depth before installation. Connect positive and negative speaker leads to the corresponding spade terminals, and avoid operating the speakers at audible distortion. Disconnect the vehicle battery before electrical work and use mounting hardware suitable for the vehicle's speaker location.\u003c\/p\u003e","brand":"SOUNDXTREME","offers":[{"title":"Default Title","offer_id":45686646145215,"sku":"704129680487","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81-D9aRG7NL.jpg?v=1780605259"},{"product_id":"crunch-cs693","title":"Crunch CS693 6 x 9\" 3-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Crunch CS693 is a pair of 6 x 9-inch, 3-way coaxial car speakers designed for replacing worn factory speakers or building a straightforward vehicle-audio upgrade. Their 4-ohm design suits many conventional car-audio speaker circuits, while the 6 x 9-inch format fits applications that use this common oval speaker size. Before purchasing, confirm the vehicle’s available cutout and mounting depth.\u003c\/p\u003e\u003cp\u003eWith 75 watts RMS and 400 watts peak power handling per speaker, the CS693 is intended for systems using a compatible factory radio or aftermarket amplification. The 3-way coaxial layout combines bass, midrange, and high-frequency elements in each speaker location. This makes it practical for listeners seeking fuller sound without adding separate tweeters and external crossover hardware.\u003c\/p\u003e\u003cp\u003eSilver alpha-cellulose poly cones provide the moving surface for midrange and bass reproduction, while UV-resistant rubber surrounds help support repeated cone movement and exposure to automotive conditions. A 1-inch Neo-Mylar soft-dome tweeter handles upper-frequency detail. The result is a speaker design focused on broad full-range playback from a compact, vehicle-ready package.\u003c\/p\u003e\u003cp\u003eCrunch uses a pure copper voice coil on a Kapton former, along with an over-coil cooling arrangement that exchanges air through the spider area. The speaker also uses an epoxy-infused natural-fiber spider to support cone travel. These construction details are intended to help the driver remain stable during regular music playback.\u003c\/p\u003e\u003cp\u003eAn anti-resonant stamped-steel basket provides the speaker’s mounting structure, and a textured ABS gasket helps create a consistent seal against the mounting surface. The integrated passive Butterworth crossover directs frequencies among the 3-way driver elements. CS693 speakers can be used as a direct-size replacement where mounting measurements and wiring connections are compatible.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Combines multiple driver elements in each 6 x 9-inch speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Handling:\u003c\/strong\u003e Supports appropriately matched factory or aftermarket power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeo-Mylar Tweeter:\u003c\/strong\u003e A 1-inch soft-dome tweeter handles high-frequency playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlpha-Cellulose Cone:\u003c\/strong\u003e Lightweight cone material supports midrange and bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber Surround:\u003c\/strong\u003e UV- and moisture-resistant surround supports durable cone movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Rigid frame helps provide a stable mounting platform.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CS693 uses silver alpha-cellulose poly cones, UV-resistant rubber surrounds, pure copper voice coils, Kapton voice-coil formers, and epoxy-infused natural-fiber spiders. Its ferrite magnet motor, anti-resonant stamped-steel basket, textured ABS gasket, and integrated passive crossover form the core of the speaker assembly. Protective grilles are included for installations where the speaker is exposed rather than mounted behind a vehicle panel.\u003c\/p\u003e\u003cp\u003eCheck the vehicle’s speaker opening, available depth, factory mounting pattern, and panel clearance before installation. The listed cutout is 8.64 x 5.98 inches, while chassis mounting depth is 3.35 inches; adapters or vehicle-specific harnesses may be needed depending on the application. Connect using suitable spade connectors or soldered connections, observe polarity, and use power appropriate for the 4-ohm, 75-watt RMS speaker rating.\u003c\/p\u003e","brand":"CRUNCH","offers":[{"title":"Default Title","offer_id":45759998329023,"sku":"CS693","price":25.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71uN77AlU4L.jpg?v=1782104998"},{"product_id":"kenwood-kfc-6966s","title":"Kenwood KFC-6966S 6x9-Inch 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Kenwood KFC-6966S is a pair of 6x9-inch 3-way coaxial car speakers for upgrading compatible factory speaker locations. It is designed for drivers who want a straightforward replacement speaker with full-range output from a single mounting position. The 4-ohm design suits many conventional car-audio speaker circuits.\u003c\/p\u003e\u003cp\u003eEach speaker is rated for 45 watts RMS input power and 400 watts peak input power. With a 91 dB sensitivity rating and a stated 35 Hz to 20 kHz frequency response, the KFC-6966S is built to provide clear everyday playback across bass, midrange, and high-frequency content. Power matching with the vehicle's head unit or an appropriately rated amplifier is important for reliable operation.\u003c\/p\u003e\u003cp\u003eThe 3-way coaxial layout combines a 6x9-inch polypropylene woofer, a 2-inch cone tweeter, and a 1\/2-inch ceramic super tweeter in each speaker assembly. This arrangement places multiple drivers in the same location, helping simplify an upgrade where separate component speakers are not required. The polypropylene woofer cone is paired with a cloth surround for durable speaker movement.\u003c\/p\u003e\u003cp\u003eKenwood uses a ferrite woofer magnet and describes an enlarged magnet circuit to support clear sound. The speaker's Sound Field Enhancer design is intended to support sound quality within the constraints of an in-vehicle installation. Its low 7\/16-inch tweeter height helps it fit beneath more factory grilles and interior panels where clearance permits.\u003c\/p\u003e\u003cp\u003eThese speakers can be used as a replacement pair in compatible rear decks, doors, or other 6x9-inch mounting locations. Confirm the vehicle's opening, mounting depth, grille clearance, and wiring connection before installation. The package includes grilles, mounting hardware, speed nuts, and short speaker cords to support a basic installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer, tweeter, and super tweeter drivers into each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e45W RMS Rating:\u003c\/strong\u003e Supports power matching with compatible car stereos or amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400W Peak Input:\u003c\/strong\u003e Provides short-term peak power handling specification for each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Uses a lightweight PP diaphragm for the 6x9-inch woofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree High-Frequency Drivers:\u003c\/strong\u003e Includes a 2-inch cone tweeter and 1\/2-inch ceramic super tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow Tweeter Profile:\u003c\/strong\u003e The 7\/16-inch tweeter height helps accommodate grille clearance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-6966S uses a silver polypropylene woofer diaphragm with a cloth surround, plus ferrite magnet structures for the woofer and tweeter sections. Each speaker measures 10-9\/16 inches wide by 7-5\/8 inches high with its grille installed. The integrated coaxial construction keeps all three driver sections in one 6x9-inch speaker assembly.\u003c\/p\u003e\u003cp\u003eVerify a 6-1\/16 by 8-3\/4-inch cutout, 3-inch mounting depth, and sufficient grille or trim clearance before purchase. Use the included tapping screws and speed nuts where appropriate, and connect the included 0.3-meter speaker cords or vehicle wiring with correct polarity. For amplified systems, select an amplifier channel that is compatible with each speaker's 4-ohm impedance and 45-watt RMS input rating.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":45766406799551,"sku":"KFC-6966S","price":46.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61C8QfbQZKL.jpg?v=1782245959"},{"product_id":"kenwood-kfc-6988rs","title":"Kenwood KFC-6988RS 6\" x 9\" 4-Way Car Speakers","description":"\u003cp\u003eThe Kenwood KFC-6988RS is a pair of 6 x 9-inch, 4-way full-range car speakers designed for replacing compatible factory speakers or building a higher-output vehicle audio system. They provide a broad frequency range with dedicated woofer, tweeter, and dual super-tweeter elements in each speaker assembly. This makes them a practical option for listeners who want clearer detail and fuller sound from a conventional 6 x 9-inch location.\u003c\/p\u003e\u003cp\u003eRated for 140 watts RMS and 670 watts peak power, the KFC-6988RS is suited to systems that need speakers with substantial power-handling capability. Its 4-ohm impedance supports use with many compatible car stereo and amplifier installations. With 88 dB sensitivity at 1 meter, it is engineered to produce useful output from appropriately matched power.\u003c\/p\u003e\u003cp\u003eThe 6 x 9-inch polypropylene woofer uses Kenwood's Diamond Array Pattern to help reduce distortion while reproducing midrange and bass content. A urethane surround supports the woofer assembly, while the steel basket provides a rigid mounting structure. Together, these elements are designed for reliable operation in a vehicle environment.\u003c\/p\u003e\u003cp\u003eA 1-3\/4-inch balanced-dome tweeter works with 20 mm and 12 mm ceramic super tweeters to extend high-frequency reproduction. Kenwood's Acoustic Sound Harmonizer manages woofer sound waves through the tweeter panel for a smoother response. The Sound Field Enhancer tweeter shape is designed to strengthen forward sound and widen the high-frequency sound field.\u003c\/p\u003e\u003cp\u003eThe KFC-6988RS can be used in compatible rear-deck, door, or other factory-style 6 x 9-inch speaker locations where depth and cutout requirements are met. Its low tweeter height helps support factory-location fitment, but vehicle-specific clearance should always be checked before installation. For a system upgrade, match the speakers with a properly configured 4-ohm head unit or amplifier and use clean, unclipped power.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e140W RMS Power Handling:\u003c\/strong\u003e Supports higher-powered systems when paired with compatible amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 x 9-Inch Polypropylene Woofer:\u003c\/strong\u003e Delivers full-range output from a durable PP cone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiamond Array Pattern:\u003c\/strong\u003e Helps reduce distortion for more controlled woofer performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Way Driver Design:\u003c\/strong\u003e Combines a woofer, dome tweeter, and two super tweeters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic Sound Harmonizer:\u003c\/strong\u003e Helps create a smoother, more natural sound response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound Field Enhancer:\u003c\/strong\u003e Promotes stronger forward sound and wider high-frequency dispersion.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-6988RS uses a black polypropylene woofer cone with Diamond Array Pattern, a urethane surround, and a steel basket. Its top plate and yoke are steel with a black finish, while the woofer and main tweeter use ferrite magnets. The speaker's low 1\/2-inch tweeter height is intended to aid fitment in many factory speaker locations.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle provides at least a 5-7\/8 x 8-5\/8-inch oval cutout and 3-3\/16 inches of mounting depth before installation. The included accessory set includes grilles, mounting hardware, speaker cords, and adhesive tape. Use the supplied template and hardware as appropriate, observe correct speaker polarity, and ensure the source unit or amplifier is compatible with a 4-ohm speaker load.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":45766409486527,"sku":"KFC-6988RS","price":72.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71mN8HztE1L.jpg?v=1782246001"},{"product_id":"kenwood-kfc-6998rs","title":"Kenwood KFC-6998RS 6x9-Inch 5-Way Car Speakers","description":"\u003cp\u003eThe Kenwood KFC-6998RS is a pair of 6x9-inch 5-way car speakers designed to replace compatible factory-installed oval speakers. They provide a full-range upgrade path for vehicles whose original speakers have lost clarity, output, or bass definition. With a 4-ohm impedance and 150W RMS power rating, they can be matched with compatible factory or aftermarket audio systems.\u003c\/p\u003e\u003cp\u003eThese speakers use a polypropylene woofer cone with Kenwood's Diamond Array Pattern, paired with a urethane surround. This construction is intended to support controlled cone movement and reduce distortion during playback. The oval 6x9-inch format is well suited to common rear-deck, door, and factory speaker locations that accept this size.\u003c\/p\u003e\u003cp\u003eA 1-3\/4-inch balanced-dome tweeter works with a 4\/5-inch ceramic super tweeter and two 1\/2-inch ceramic super tweeters. The multi-driver design is built to reproduce upper-frequency detail alongside the woofer's midrange and lower-frequency output. Kenwood rates the KFC-6998RS for a frequency response of 58Hz to 22kHz.\u003c\/p\u003e\u003cp\u003eKenwood's Acoustic Sound Harmonizer manages woofer sound waves through the tweeter-panel openings to help produce a smoother, more natural response. The speakers also use a Sound Field Enhancer tweeter shape intended to strengthen forward sound and widen the high-frequency sound field. These features help make the speaker a practical choice for listeners seeking a more detailed presentation from a conventional full-range replacement speaker.\u003c\/p\u003e\u003cp\u003eFor installation, the KFC-6998RS has a 5-7\/8 by 8-5\/8-inch cutout requirement and a 3-3\/16-inch mounting depth. Its low 1\/2-inch tweeter height is designed to support fitment in many factory locations. Included grilles, hardware, speaker wire, and adhesive tape provide useful installation accessories, although vehicle-specific adapters or harnesses may still be needed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-Way Driver System:\u003c\/strong\u003e Combines a woofer, balanced-dome tweeter, and three super tweeters for broad full-range reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W RMS Power:\u003c\/strong\u003e Handles substantial continuous power when paired with a properly matched compatible amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiamond Array Woofer Cone:\u003c\/strong\u003e Polypropylene cone pattern helps reduce distortion and supports clear, controlled playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic Sound Harmonizer:\u003c\/strong\u003e Controls woofer sound waves through the tweeter panel for smoother, more natural sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound Field Enhancer:\u003c\/strong\u003e Tweeter shape is designed for stronger forward sound and wider high-frequency dispersion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory-Location Fit:\u003c\/strong\u003e Low tweeter height helps the speaker fit in many compatible factory mounting locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-6998RS uses a black polypropylene woofer cone, urethane surround, steel basket, and black-painted steel top plate and yoke. Its magnetic circuit uses a ferrite woofer magnet, while the tweeter also uses a ferrite magnet. The black-painted yoke and plate are designed to release heat efficiently within the magnetic circuit and support voice-coil durability.\u003c\/p\u003e\u003cp\u003eConfirm available mounting depth, cutout dimensions, and vehicle-specific mounting provisions before purchase. Connect each speaker to a compatible 4-ohm speaker output and use an amplifier or head unit whose setup is appropriate for the speaker's published power rating. The supplied grille assemblies, tapping screws, washers, speaker cords, and adhesive tape can assist with installation, but vehicle-specific brackets or wiring adapters are not listed as included.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":45766412763327,"sku":"KFC-6998RS","price":77.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71iV5oNJ_uL.jpg?v=1782246046"},{"product_id":"rockford-fosgate-p1v2-69","title":"Rockford Fosgate P1V2-69 6x9\" 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Rockford Fosgate P1V2-69 is a pair of 6x9-inch, 4-ohm 3-way coaxial speakers designed as a straightforward replacement for factory full-range speakers. They bring dedicated high-frequency drivers into a single speaker assembly, helping upgrade older or basic OEM systems that use single-cone drivers. The pair is suited to compatible door or rear-deck locations where a 6x9-inch speaker is specified.\u003c\/p\u003e\u003cp\u003eEach speaker is rated for 75 watts RMS and 150 watts peak, allowing the set to work with a compatible factory radio or an appropriately matched aftermarket amplifier. Its 45 Hz to 25 kHz frequency response covers low-midrange through high-frequency content for full-range playback. A 4-ohm nominal impedance supports common car-audio system configurations.\u003c\/p\u003e\u003cp\u003eThis 3-way design combines a 6x9-inch midrange driver with a 3\/4-inch inverted-dome tweeter and a 3\/8-inch piezo super tweeter. The integrated driver arrangement is intended to provide more high-frequency detail than a basic single-cone factory speaker. An internal crossover network directs the upper-frequency signal to the tweeter section.\u003c\/p\u003e\u003cp\u003eThe P1V2-69 uses a mica-reinforced polypropylene curvilinear cone, Santoprene half-roll surround, and Nomex spider. Its composite basket, vented Kapton voice-coil former, and ferrite motor structure support the speaker's mechanical and thermal design. The motor cover can be removed when additional mounting clearance is needed.\u003c\/p\u003e\u003cp\u003eThese speakers are sold as a pair and include installation hardware, short speaker-wire leads, connectors, and a cutout template. They can be used as an all-in-one upgrade in vehicles with compatible 6x9-inch mounting locations. Confirm the cutout, mounting depth, front clearance, and vehicle-specific fitment before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Integrates midrange, tweeter, and piezo drivers in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75-Watt RMS Rating:\u003c\/strong\u003e Supports amplifier or head-unit power matched to 75 watts RMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Fits common aftermarket and factory-style car-audio speaker circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e45 Hz–25 kHz Response:\u003c\/strong\u003e Covers a broad full-range audio bandwidth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Motor Cover:\u003c\/strong\u003e Helps accommodate installations with limited rear clearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Installation Items:\u003c\/strong\u003e Provides screws, connectors, wire leads, and a cutout template.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P1V2-69 combines a 20–40% mica-reinforced polypropylene cone with a chemically bonded Santoprene half-roll surround and a linear Nomex spider. It uses a 15% glass-fiber-reinforced PA66 composite basket, stitched tinsel leads, co-molded terminals, a vented Kapton voice-coil former, and a Y35 ferrite motor structure. The 3\/4-inch Tetolon inverted-dome tweeter and 3\/8-inch polypropylene piezo driver are mounted concentrically within the speaker assembly.\u003c\/p\u003e\u003cp\u003eVerify that the vehicle accepts a 6x9-inch speaker and check the 8.4 x 5.71-inch cutout requirement, 3.13-inch mounting depth with motor cover, 2.76-inch minimum depth without motor cover, and 0.42-inch front-side clearance. Disconnect the vehicle battery negative terminal before installation, route wiring before mounting, and observe positive and negative terminal polarity. Grilles are not included; separate grilles may be needed when the speaker is installed in an exposed location.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45767997456575,"sku":"P1V2-69","price":108.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/51woN4hboyL.jpg?v=1782270221"},{"product_id":"rockford-fosgate-r169x2","title":"Rockford Fosgate R169X2 6x9\" 2-Way Speakers","description":"\u003cp\u003eThe Rockford Fosgate Prime R169X2 is a pair of 6x9-inch, 2-way coaxial full-range car speakers designed for factory-speaker replacement. They provide a practical upgrade for vehicles with worn, damaged, or limited-stock speakers while retaining a conventional full-range speaker layout. Each speaker is rated for 65 watts RMS and uses a 4-ohm nominal impedance.\u003c\/p\u003e\u003cp\u003eThis speaker pair is intended for listeners who want a straightforward replacement in compatible door, rear-deck, or other 6x9-inch locations. Its coaxial construction places the tweeter within the woofer assembly, keeping the installation contained in one speaker position. The 48 Hz to 20 kHz frequency response covers bass, midrange, and treble duties for a full-range system.\u003c\/p\u003e\u003cp\u003eA vacuum polypropylene woofer cone and rubber surround form the low- and mid-frequency section of each speaker. This material combination is paired with a stamped-steel basket for a durable, conventional car-speaker structure. The stated sensitivity is 90 dB at 1 watt\/1 meter.\u003c\/p\u003e\u003cp\u003eFor high frequencies, the R169X2 uses a flush-mounted 0.50-inch silk-dome tweeter. An integrated 6 dB high-pass crossover directs upper-frequency content to the tweeter. This gives the speakers a two-way design without requiring separate external crossover boxes.\u003c\/p\u003e\u003cp\u003eThe R169X2 works with factory head units or an amplifier whose output is matched appropriately to the speakers' 2 to 65 watt RMS power range. Grilles or trim rings and installation accessories are included, but vehicle-specific brackets or wiring adapters may still be needed depending on the vehicle. Confirm the mounting cutout, depth, mounting-hole pattern, and connector compatibility before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each speaker location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e65-Watt RMS Rating:\u003c\/strong\u003e Supports compatible factory-radio or amplified system power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilk-Dome Tweeter:\u003c\/strong\u003e Handles high frequencies through a flush-mounted design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Provides the main full-range cone assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated High-Pass Crossover:\u003c\/strong\u003e Routes high frequencies to the tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Nominal Impedance:\u003c\/strong\u003e Matches common automotive speaker-system configurations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe R169X2 uses a vacuum polypropylene cone, rubber surround, stamped-steel basket, and silk-dome flush-mounted tweeter. It is a black 2-way coaxial speaker with an integrated tweeter crossover. Grilles or trim rings are included for applicable installations.\u003c\/p\u003e\u003cp\u003eVerify that the vehicle has room for the 5.93 x 8.59-inch cutout and 2.85-inch mounting depth before purchasing. The package includes a pair of speakers, a pair of grilles or trim rings, 16 feet of 26-gauge speaker wire, eight speed clips, and four mounting screws. Observe positive and negative terminal polarity, disconnect the vehicle battery negative terminal before installation, and use vehicle-specific adapters when the factory opening or connector does not match.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768042741951,"sku":"R169X2","price":43.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71_bLiEDh8L.jpg?v=1782270403"},{"product_id":"rockford-fosgate-r169x3","title":"Rockford Fosgate R169X3 6\"x9\" 3-Way Speakers","description":"\u003cp\u003eThe Rockford Fosgate Prime R169X3 is a pair of 6\"x9\" 3-way full-range coaxial speakers designed for replacing compatible factory speakers. They provide a straightforward upgrade path for vehicles that use 6\"x9\" speaker locations and need more capable replacement drivers. Each speaker uses a 4-ohm design suitable for many aftermarket and factory audio systems. Vehicle-specific fitment should be verified before purchase.\u003c\/p\u003e\u003cp\u003eWith a 65-watt RMS and 130-watt peak power rating per speaker, the R169X3 is suited to systems powered by a factory radio or a properly matched aftermarket amplifier. Its 90 dB sensitivity rating helps it produce useful output from modest amplifier power. The 47 Hz to 20 kHz frequency response covers bass, midrange, and treble duties in a single coaxial speaker assembly. It is intended as a full-range solution rather than a dedicated subwoofer replacement.\u003c\/p\u003e\u003cp\u003eThe 3-way configuration combines a polypropylene woofer cone with a 1\/2-inch silk-dome tweeter and a piezo supertweeter. This arrangement distributes upper-frequency reproduction across dedicated drivers while the woofer handles the primary midbass and midrange range. A rubber surround supports the woofer cone, and an integrated high-pass tweeter crossover is built into the design. The crossover is specified with a 6 dB high-pass slope.\u003c\/p\u003e\u003cp\u003eRockford Fosgate uses a stamped steel basket to provide a stable mounting structure for the speaker assembly. The R169X3 is CEA-2031 compliant for power handling and is identified as Verified with Klippel. Its 1.0-inch voice coil, 63 Hz free-air resonance, and 2.6 mm Xmax are documented manufacturer specifications. These details help define its performance and installation requirements.\u003c\/p\u003e\u003cp\u003eFor an upgrade system, the R169X3 can be used as a matched pair in compatible front-door, rear-deck, or other 6\"x9\" factory locations. The package includes grilles or trim rings, speaker wire, speed clips, and mounting screws for installation support. An external amplifier is optional, but if one is used, it should be selected and adjusted appropriately for the speakers' 65-watt RMS rating. Confirm cutout size, mounting depth, wiring polarity, and clearance for windows or other moving vehicle components before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Combines woofer, silk-dome tweeter, and piezo supertweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e65-Watt RMS Handling:\u003c\/strong\u003e Supports properly matched factory-radio or amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Provides a durable cone for full-range reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated High-Pass Crossover:\u003c\/strong\u003e Directs high frequencies to the tweeter section.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches many common car-audio speaker circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Installation Accessories:\u003c\/strong\u003e Supplies grilles, wire, clips, and mounting screws.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe R169X3 uses a vacuum polypropylene woofer cone, rubber surround, and stamped steel basket. A 1\/2-inch silk-dome tweeter and piezo supertweeter are pole-mounted above the woofer. Grilles or trim rings are included for installations where the speakers are visible. The speaker has a 1.0-inch voice coil and a 4-ohm nominal impedance.\u003c\/p\u003e\u003cp\u003eAllow for a 5.93\"x8.59\" mounting cutout and 2.85 inches of mounting depth. Check that the speaker clears window tracks, locks, and other moving parts when installing in a door. Observe the marked positive terminal for correct polarity, use the included mounting hardware as appropriate, and confirm whether your vehicle requires separate vehicle-specific mounting brackets or wiring adapters.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768042807487,"sku":"R169X3","price":53.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71NEtPc4RXL.jpg?v=1782270406"},{"product_id":"rockford-fosgate-hd24-stg3","title":"Rockford Fosgate HD24-STG3 6.5\"\/6x9\" Harley Audio Kit","description":"\u003cp\u003eThe Rockford Fosgate HD24-STG3 is a Stage-3 amplified audio upgrade for select 2024+ Harley-Davidson Touring motorcycles with Skyline OS. It combines upper-fairing and saddlebag speakers with a dedicated four-channel amplifier, addressing the limited output and coverage of a basic motorcycle audio setup. The kit is designed as a coordinated system rather than a collection of separate components.\u003c\/p\u003e\u003cp\u003eThis package is intended for Road Glide and Street Glide riders seeking fuller sound coverage at highway speeds. Two 6.5-inch fairing speakers handle the front soundstage, while two 6x9-inch speakers add output from the saddlebag area. Both speaker pairs use 2-way designs and are rated for 150 watts RMS per speaker.\u003c\/p\u003e\u003cp\u003eThe system is voiced for open-air motorcycle listening, with long-throw woofers and extended low-frequency response intended to support stronger bass and midrange presence. Heat-resistant motor structures and radiator-ring cooling are used to manage speaker heat during demanding use. The result is a balanced, high-output platform built for riding conditions rather than an enclosed vehicle cabin.\u003c\/p\u003e\u003cp\u003eIts included TMA-1000X4i amplifier uses direct A2B digital integration with compatible Harley-Davidson Skyline OS infotainment systems. The amplifier includes DSP processing and Bluetooth connectivity for RF Connect app setup, including loading a tune matched to the audio kit. Gain and crossover settings can also be adjusted digitally through the app.\u003c\/p\u003e\u003cp\u003eThe HD24-STG3 is designed to provide an upgrade path as well as a complete four-speaker system. Its four-channel amplifier supports up to eight-speaker audio systems when expanded with compatible components. The supplied installation hardware, grilles, wiring, amplifier mounting components, and saddlebag cut-in kit keep the main equipment matched for a single-system installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Speaker System:\u003c\/strong\u003e Includes two 6.5-inch fairing speakers and two 6x9-inch saddlebag speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000-Watt Amplifier:\u003c\/strong\u003e Four-channel digital amplifier provides dedicated power for the included speaker system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkyline OS Integration:\u003c\/strong\u003e Direct A2B connection works without factory-radio flashing on compatible motorcycles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF Connect Tuning:\u003c\/strong\u003e Bluetooth app control loads DSP tunes and adjusts gain and crossover settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElement Ready Construction:\u003c\/strong\u003e Components and harnesses are designed for water, dirt, UV, and vibration exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpansion Capability:\u003c\/strong\u003e The amplifier supports compatible systems with up to eight speakers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe HD24-STG3 uses motorcycle-specific components made for exposure to vibration and weather. The speakers use carbon-filled curvilinear poly cones, Santoprene VAST surrounds, Poly-Nomex spiders, reinforced composite baskets, and neodymium motor assemblies. The amplifier has an IPX4-rated Element Ready chassis, an extruded-aluminum heatsink, and a compact form factor for motorcycle installation.\u003c\/p\u003e\u003cp\u003eThe kit includes model-specific fairing grilles for 2024+ Road Glide and Street Glide applications, saddlebag grilles, a bag-lid cut-in kit, amplifier mounting hardware, and a plug-and-play wiring kit. It is intended for select 2024+ Harley-Davidson Touring motorcycles equipped with Skyline OS; confirm motorcycle fitment, factory-audio configuration, and saddlebag type before purchase. Rockford Fosgate lists typical installation time at approximately five hours.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768044183743,"sku":"HD24-STG3","price":1844.07,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61X4LixRDoL.jpg?v=1782270449"},{"product_id":"rockford-fosgate-hd14-pmx-stg3","title":"Rockford Fosgate HD14-PMX-STG3 6.5\/6x9 Harley Audio System","description":"\u003cp\u003eThe Rockford Fosgate HD14-PMX-STG3 is a complete Stage-3 motorcycle audio upgrade for select 2014-2023 Harley-Davidson Street Glide and Road Glide models. It combines a direct-replacement PMX-HD14 infotainment receiver, front fairing speakers, rear saddlebag speakers, a four-channel amplifier, and a vehicle-specific installation kit. The package is intended for riders who want a coordinated audio system rather than sourcing individual components separately.\u003c\/p\u003e\u003cp\u003eThe system uses two 6.5-inch TMS65 fairing speakers and two 6x9-inch TMS69BL14 saddlebag speakers to create front and rear coverage. Its M5-800X4 amplifier provides four amplified channels and the kit is rated at 800 watts total power. This layout is designed to help music remain audible against typical motorcycle wind, road, and exhaust noise.\u003c\/p\u003e\u003cp\u003eAt the center of the system, the PMX-HD14 replaces the factory radio in compatible Harley-Davidson applications. It provides a 7-inch color TFT touchscreen, Apple CarPlay, Bluetooth audio, AM\/FM\/weather-band reception, USB playback, and SiriusXM readiness with a compatible tuner and subscription. Factory thumb-control functionality is retained on compatible motorcycles.\u003c\/p\u003e\u003cp\u003eThe included M5-800X4 amplifier is an IPX6-rated, Element Ready four-channel model with configurable high-pass and low-pass crossovers. The amplifier installation kit uses vehicle-specific wiring, mounting hardware, and an 8 AWG power\/ground arrangement to integrate the amplifier with the motorcycle. A 90-degree harness is included for applicable Road Glide installations.\u003c\/p\u003e\u003cp\u003eThe saddlebag kit is made for factory Harley-Davidson ABS hardshell bags and uses retrofit templates, grilles, wiring, and mounting hardware. The system can also serve as a foundation for a larger Rockford Fosgate Harley-Davidson audio build, with harness provisions that support additional lower-fairing, saddlebag, or Tour-Pak speaker expansion. Verify the manufacturer compatibility chart for the exact motorcycle, trim, factory audio equipment, and saddlebag configuration before purchase.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Four-Speaker System:\u003c\/strong\u003e Includes front 6.5-inch and rear 6x9-inch speakers, amplifier, receiver, and installation hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePMX-HD14 Touchscreen Receiver:\u003c\/strong\u003e Adds a direct-replacement 7-inch infotainment source for compatible Harley-Davidson motorcycles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApple CarPlay Connectivity:\u003c\/strong\u003e Provides iPhone integration through the PMX-HD14 receiver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e800-Watt Four-Channel Amplification:\u003c\/strong\u003e The M5-800X4 powers separate front and rear speaker channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElement Ready Components:\u003c\/strong\u003e Speakers and amplifier are designed for motorcycle exposure to water, UV, vibration, and road conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-Specific Harnessing:\u003c\/strong\u003e Included wiring and brackets support a cleaner installation on compatible Harley-Davidson models.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe HD14-PMX-STG3 combines purpose-built motorcycle components with factory-oriented fitment. The TMS65 speakers use integrated 25 mm tweeters, while the TMS69BL14 bag-lid speakers use weather-resistant construction, Santoprene VAST surrounds, reinforced polymer frames, and protective grilles. The M5-800X4 uses an Element Ready chassis, conformal-coated circuit boards, heavy-duty connectors, and an IPX6 water-intrusion rating.\u003c\/p\u003e\u003cp\u003eInstallation uses the supplied RFK-HD14M5 amplifier kit, direct-connect harnesses, mounting brackets, and saddlebag cut-in templates. The base package is designed to eliminate the need to flash the radio, although using front\/rear fader functionality requires the specified Rockford Fosgate 2014+ All Bikes flash. Confirm fitment before installation, especially for factory-equipped audio packages, Harley-Davidson ABS saddlebags, and Road Glide versus Street Glide fairing configuration.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768046018751,"sku":"HD14-PMX-STG3","price":2079.11,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61JRHPNEJ3L.jpg?v=1782270484"},{"product_id":"rockford-fosgate-hd14-pmx-stg5","title":"Rockford Fosgate HD14-PMX-STG5 6.5\/6x9\/Dual 10-Inch Audio Kit","description":"\u003cp\u003eThe Rockford Fosgate HD14-PMX-STG5 is a complete Stage-5 motorcycle audio upgrade for select 2014-2023 Harley-Davidson Street Glide and Road Glide models. It combines a direct-replacement PMX-HD14 infotainment receiver, fairing speakers, saddlebag speakers, dual subwoofers, amplifiers, and installation hardware. The package is intended for riders who want a coordinated audio system rather than sourcing individual components separately.\u003c\/p\u003e\u003cp\u003eThe system uses two 6.5-inch fairing speakers, two 6x9-inch saddlebag speakers, and two 10-inch saddlebag subwoofers. This arrangement provides front-stage output, rear fill, and dedicated low-frequency reproduction in separate saddlebag enclosures. Two M5-800X4 four-channel amplifiers provide the system's stated 1,600-watt total power.\u003c\/p\u003e\u003cp\u003eAt the center of the system is the PMX-HD14 digital media receiver for compatible Harley-Davidson touring motorcycles. Its 7-inch color TFT touchscreen supports Apple CarPlay, Bluetooth audio streaming, AM\/FM\/weather-band radio, USB, auxiliary input, and SiriusXM readiness with the required SXV300 tuner. It also retains factory thumb-control functionality on compatible motorcycles.\u003c\/p\u003e\u003cp\u003eThe fairing and saddlebag speaker components are designed for motorcycle use, with Element Ready protection for exposure to water, dirt, UV, and vibration. The TMS65 fairing speakers use integrated 25 mm tweeters, while the TMS69BL14 kit adapts 6x9-inch speakers to compatible factory Harley-Davidson ABS saddlebag lids. The dual subwoofer system keeps each 10-inch subwoofer acoustically separated from the 6x9-inch saddlebag speaker.\u003c\/p\u003e\u003cp\u003eThis kit is built as a plug-and-play upgrade using vehicle-specific harnessing and factory attachment locations where applicable. Its saddlebag subwoofer arrangement is designed to allow removal of one or both subwoofer assemblies without tools when luggage capacity is needed. Confirm motorcycle, factory-audio, saddlebag, lid, and power-lock compatibility before purchase or installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Stage-5 System:\u003c\/strong\u003e Includes receiver, speakers, subwoofers, amplifiers, and installation kits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePMX-HD14 Receiver:\u003c\/strong\u003e Direct-replacement touchscreen receiver with Apple CarPlay and Bluetooth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix Main Speakers:\u003c\/strong\u003e Combines 6.5-inch fairing and 6x9-inch saddlebag speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 10-Inch Bass:\u003c\/strong\u003e Dedicated saddlebag subwoofers add low-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo M5-800X4 Amplifiers:\u003c\/strong\u003e Four-channel amplifiers support the system's stated 1,600-watt total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory-Integrated Fitment:\u003c\/strong\u003e Uses model-specific harnesses, mounting locations, and retained thumb controls.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe HD14-PMX-STG5 uses motorcycle-specific components designed around Harley-Davidson touring fitment. Its speakers and M5 amplifiers use Element Ready construction for outdoor exposure, while the bag-lid speaker kit and saddlebag subwoofer system are shaped for factory-style integration. The subwoofer enclosures create separate air spaces so the 6x9-inch speakers and 10-inch subwoofers operate independently.\u003c\/p\u003e\u003cp\u003eInstallation should begin by confirming the exact motorcycle configuration against Rockford Fosgate's compatibility chart. The kit is intended for factory Harley-Davidson ABS plastic saddlebags; fiberglass bags, incompatible factory amplified systems, and certain power-lock or stretched-bag configurations may not fit. Use the supplied vehicle-specific harnesses and amplifier installation kits, and reserve the SiriusXM SXV300 tuner for a separate purchase if satellite radio is desired.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768047034559,"sku":"HD14-PMX-STG5","price":3808.69,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61OweErNzUL.jpg?v=1782270501"},{"product_id":"rockford-fosgate-hd9813sg-stg3","title":"Rockford Fosgate HD9813SG-STG3 6.5\"\/6x9\" Harley Audio Kit","description":"\u003cp\u003eThe Rockford Fosgate HD9813SG-STG3 is a Stage 3 motorcycle audio package for select 1998-2013 Harley-Davidson Street Glide and Electra Glide models. It combines two 6.5-inch fairing speakers, two 6x9-inch saddlebag speakers, a four-channel amplifier, and a model-specific installation kit. The package is intended for riders who want a more capable, amplified audio system while retaining factory-oriented fitment.\u003c\/p\u003e\u003cp\u003eThe system uses dedicated front and rear speaker locations to provide broader sound coverage than a fairing-only upgrade. Its 6.5-inch TMS6SG fairing speakers handle front-stage listening, while the TMS69BL9813 6x9-inch saddlebag kit adds rear output and low-frequency presence. This arrangement is designed for listening in an open-air motorcycle environment with wind, road, and exhaust noise present.\u003c\/p\u003e\u003cp\u003eAt the center of the kit is the Rockford Fosgate M5-800X4, an IPX6-rated four-channel Element Ready amplifier. It is rated for 100 watts RMS per channel at either 2 or 4 ohms, with four amplifier channels available for the included speakers. The amplifier also provides selectable high-pass, low-pass, or all-pass filtering for system setup.\u003c\/p\u003e\u003cp\u003eThe TMS6SG fairing speakers are 6.5-inch, 2-way models with phase-aligned 25 mm tweeters and Street Glide-specific grilles. The rear TMS69BL9813 kit uses a pair of 6x9-inch, 2-way speakers made to retrofit compatible factory Harley-Davidson hardshell saddlebag lids. Both speaker sets are part of Rockford Fosgate's Element Ready line for exposure to the outdoor motorcycle environment.\u003c\/p\u003e\u003cp\u003eThe supplied RFK-HD9813M5 installation kit is tailored to the amplifier and compatible 1998-2013 Harley-Davidson applications. It includes the amplifier mounting hardware, power wiring, front and rear harnessing, and output Y-adapters used by the system. A compatible multimedia source unit can be added later, but it is not included with this package.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Speaker Configuration:\u003c\/strong\u003e Includes two 6.5-inch fairing speakers and two 6x9-inch saddlebag speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM5-800X4 Amplifier:\u003c\/strong\u003e Four-channel amplified platform with 800-watt total dynamic power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElement Ready Construction:\u003c\/strong\u003e Components are built for water, UV, vibration, dirt, and corrosion exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory-Oriented Fitment:\u003c\/strong\u003e Designed around select Harley-Davidson fairing and saddlebag mounting locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase-Aligned Front Tweeters:\u003c\/strong\u003e TMS6SG speakers use 25 mm tweeters for coherent front-stage output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Installation Kit:\u003c\/strong\u003e Includes mounting hardware and direct-connect vehicle-specific wiring harnesses.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe M5-800X4 amplifier uses an Element Ready chassis, conformal-coated circuit boards, heavy-duty molded connectors, and a die-cast aluminum heat sink. The included speakers are engineered for motorcycle use, while the TMS69BL9813 saddlebag speakers use carbon-fiber-reinforced polypropylene cones and Santoprene surrounds. The kit also includes grilles and mounting hardware where required for its intended installation locations.\u003c\/p\u003e\u003cp\u003eInstallation is intended for compatible 1998-2013 Harley-Davidson Street Glide and Electra Glide applications using the included RFK-HD9813M5 hardware and harnessing. The saddlebag speaker kit is for factory ABS plastic hardshell lids and is not compatible with fiberglass lids or Harley-Davidson Power Lock kits. Verify the motorcycle's exact trim, existing audio equipment, saddlebag configuration, and fitment notes before installation; CVO and Screaming Eagle models require modification rather than plug-and-play installation.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768047067327,"sku":"HD9813SG-STG3","price":1399.88,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61DcVbiSJjL.jpg?v=1782270504"},{"product_id":"rockford-fosgate-tms69bl9813","title":"Rockford Fosgate TMS69BL9813 6x9\" Saddlebag Speaker Kit","description":"\u003cp\u003eThe Rockford Fosgate TMS69BL9813 is a rear saddlebag-lid speaker retrofit kit for select 1998-2013 Harley-Davidson motorcycles. It adds a pair of 6x9-inch coaxial speakers to compatible factory hard saddlebags, providing a way to expand a fairing audio system without replacing the bag lids. The kit includes the cutting templates, mounting parts, grilles, and harnesses needed for the saddlebag installation.\u003c\/p\u003e\u003cp\u003eThis kit is intended for riders building a Rockford Fosgate motorcycle audio system with rear speakers. Its direct-connect harness is designed to integrate with compatible Rockford Fosgate compact-chassis Punch and Power amplifiers rather than factory Harley-Davidson amplifiers. If retaining a factory Harley-Davidson head unit, the factory radio needs to be flashed for use with this kit.\u003c\/p\u003e\u003cp\u003eEach included TMS69 speaker is a 6x9-inch, 2-way coaxial design rated for 100 watts RMS and 200 watts peak. A carbon-fiber-reinforced polypropylene cone and Santoprene VAST surround support midbass output, while the 1-inch film-dome tweeter handles high frequencies. The 4-ohm speakers have a specified frequency response of 56 Hz to 20 kHz.\u003c\/p\u003e\u003cp\u003eElement Ready construction is designed for the environmental exposure associated with motorcycle use, including dust, UV light, temperature changes, water, corrosion, and vibration. The speaker assembly uses an ultra-high-temperature glass-reinforced polymer frame, while the kit uses painted stamped-steel grilles with ASA plastic frames. A sandwich-clamping gasket arrangement helps seal the speaker installation at the saddlebag lid.\u003c\/p\u003e\u003cp\u003eThe TMS69BL9813 is designed for factory Harley-Davidson hardshell saddlebag lids on specified touring motorcycles. The included cutout guides and two-piece mounting system allow the speakers to be fitted into existing lids rather than requiring pre-cut or color-matched replacement lids. Leave at least 2 inches of clearance below each speaker magnet when packing the saddlebags.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Coaxial Speakers:\u003c\/strong\u003e Adds two full-range rear speakers to compatible saddlebag lids.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-Watt RMS Rating:\u003c\/strong\u003e Supports amplifier-powered motorcycle audio installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElement Ready Construction:\u003c\/strong\u003e Built for exposure to outdoor riding conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-Connect Harness:\u003c\/strong\u003e Simplifies connection to compatible Rockford Fosgate amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Templates Included:\u003c\/strong\u003e Helps position the required saddlebag-lid openings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Mounting System:\u003c\/strong\u003e Secures speakers, grilles, and rings through the lids.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe included TMS69 speakers use carbon-fiber-reinforced polypropylene cones, Santoprene VAST surrounds, 1-inch film-dome tweeters, and neodymium motor structures. Their frames are made from ultra-high-temperature glass-reinforced polymer. The kit's painted stamped-steel grilles use ASA plastic frames for UV protection, and the sandwich-clamping gasket design supports an environmental seal at the lid.\u003c\/p\u003e\u003cp\u003eInstallation requires cutting the existing factory saddlebag lids with the supplied templates, then mounting the grille, mounting ring, and speaker with the included hardware. The main harness routes to a compatible Rockford Fosgate compact-chassis Punch or Power amplifier, with individual saddlebag harnesses routing inside each bag. This kit is for compatible ABS plastic factory lids; fiberglass lids are not supported, and some CVO, Screaming Eagle, Tour-Pak, and H-D Power Lock applications may require modification or may not be compatible.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768047132863,"sku":"TMS69BL9813","price":473.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/715lYVLz0WL.jpg?v=1782270506"},{"product_id":"rockford-fosgate-tms69","title":"Rockford Fosgate TMS69 6\"x9\" Motorcycle Bag Lid Speakers","description":"\u003cp\u003eThe Rockford Fosgate TMS69 is a pair of 6\"x9\" two-way coaxial speakers made for motorcycle bag-lid locations sized for 6\"x9\" speakers. They are intended for riders who need more audible music output than typical motorcycle speakers can provide in an open-air riding environment. The design combines a dedicated midrange driver and coaxial tweeter in a compact, bag-lid-ready format.\u003c\/p\u003e\u003cp\u003eWith 100 watts RMS power handling per pair and a 4-ohm nominal impedance, the TMS69 is suited to a properly matched motorcycle audio system. Its 56 Hz to 20 kHz frequency response supports midbass, vocals, and high-frequency detail from one speaker assembly. The 89 dB sensitivity rating at 1 watt\/1 meter helps support useful output from an appropriately configured amplifier.\u003c\/p\u003e\u003cp\u003eA 25 mm film-dome neodymium tweeter handles high frequencies, while the reinforced polypropylene cone is paired with a Santoprene VAST surround. The low-profile coaxial tweeter design keeps the assembly compact for bag-lid applications. An integrated high-pass crossover uses a high-power polyester capacitor to direct high frequencies to the tweeter.\u003c\/p\u003e\u003cp\u003eThe TMS69 uses Rockford Fosgate Element Ready construction for motorcycle use. Its materials and construction are designed to address exposure to dust, UV, temperature changes, water, corrosion, and vibration. A neodymium ring-magnet motor, glass-reinforced polymer frame, and integrated spade terminals support the speaker's motorcycle-focused design.\u003c\/p\u003e\u003cp\u003eThese speakers are a practical choice for a bag-lid audio upgrade where a 6\"x9\" opening is already available or is being added with a compatible installation solution. Confirm the available mounting opening and depth before installation, as the speaker requires a 2.8-inch mounting depth. Pair the TMS69 with compatible 4-ohm amplifier channels and suitable motorcycle-grade wiring for a complete system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6\"x9\" Bag-Lid Format:\u003c\/strong\u003e Designed for motorcycle bag-lid locations built for 6\"x9\" speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Combines the main driver and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W RMS Handling:\u003c\/strong\u003e Supports amplifier matching for higher-output motorcycle audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 mm Film-Dome Tweeter:\u003c\/strong\u003e Reproduces high frequencies through an integrated coaxial design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElement Ready Construction:\u003c\/strong\u003e Built to address weather, UV exposure, corrosion, and vibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated High-Pass Crossover:\u003c\/strong\u003e Uses a polyester capacitor to route high frequencies to the tweeter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TMS69 uses a carbon-fiber-reinforced polypropylene cone, Santoprene VAST surround, poly-cotton spider, Santoprene front isolation spider, and an ultra-high-temperature glass-reinforced polymer frame. Its neodymium ring-magnet motor and 35.6 mm voice coil are paired with a low-profile coaxial tweeter assembly. The speaker has integrated spade terminals and does not include a separate grille or trim ring.\u003c\/p\u003e\u003cp\u003eVerify that the motorcycle has an appropriate 6\"x9\" bag-lid speaker location and sufficient 2.8-inch mounting depth before purchasing. The published mounting opening is 8.6 by 5.6 inches, so measure the specific lid or installation kit carefully. The package includes a pair of TMS69 speakers and eight stainless socket-head mounting screws; use suitable wiring, secure connections, and a compatible 4-ohm audio system.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768047362239,"sku":"TMS69","price":297.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/611xqk2V_dL.jpg?v=1782270513"},{"product_id":"rockford-fosgate-hd14-stg3","title":"Rockford Fosgate HD14-STG3 6.5\"\/6x9\" Harley Audio Kit","description":"\u003cp\u003eThe Rockford Fosgate HD14-STG3 is a four-speaker amplified audio upgrade package for select 2014-2023 Harley-Davidson Street Glide and Road Glide motorcycles. It combines front fairing speakers, rear saddlebag-lid speakers, a four-channel amplifier, and a vehicle-specific installation kit. The system is intended for riders who want a more substantial audio solution than factory speakers alone.\u003c\/p\u003e\u003cp\u003eIts front stage uses a pair of TMS65 6.5-inch two-way speakers, while the rear stage uses the TMS69BL14 6x9-inch saddlebag speaker retrofit kit. Each speaker set is designed for the motorcycle environment and uses integrated 25 mm tweeters for full-range playback. The front-and-rear layout helps distribute sound across the motorcycle rather than relying only on fairing-mounted speakers.\u003c\/p\u003e\u003cp\u003ePower comes from the included M5-800X4, a four-channel Element Ready amplifier with an IPX6 water-intrusion rating. The amplifier provides four dedicated channels for the supplied speaker system and includes adjustable high-pass and low-pass crossover controls. Its C.L.E.A.N. setup system uses clip indicators to help establish appropriate gain settings.\u003c\/p\u003e\u003cp\u003eThe supplied RFK-HD14M5 installation kit is tailored to compatible Harley-Davidson touring motorcycles and includes direct-connect wiring provisions. The kit uses 8 AWG power and ground wiring, a 60-amp MAXI fuse, and 16 AWG speaker wiring. A 90-degree harness is included for Road Glide installations, while Y-adapters support future compatible speaker expansion.\u003c\/p\u003e\u003cp\u003eThis package is a practical foundation for a staged Harley-Davidson audio build because it includes the amplification and rear-speaker hardware needed for a four-speaker layout. The bag-lid speakers are intended for factory Harley-Davidson ABS plastic saddlebags and require cutting the bag lids with the included templates. Factory Harley-Davidson radios must be flashed for use with this kit, so fitment and radio configuration should be confirmed before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Speaker System:\u003c\/strong\u003e Combines two 6.5-inch fairing speakers and two 6x9-inch saddlebag speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM5-800X4 Amplifier:\u003c\/strong\u003e Supplies four channels of dedicated amplification for the included speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElement Ready Construction:\u003c\/strong\u003e Components are engineered for water, UV, vibration, and outdoor exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX6 Amplifier Rating:\u003c\/strong\u003e Helps protect the amplifier against powerful water spray.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-Specific Wiring:\u003c\/strong\u003e Direct-connect harnesses simplify integration on compatible Harley-Davidson motorcycles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSaddlebag Retrofit Hardware:\u003c\/strong\u003e Includes cutout templates, mounting parts, grilles, and saddlebag harnesses.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe HD14-STG3 combines Rockford Fosgate's motorcycle-specific TMS speakers with an Element Ready M5-series amplifier. The TMS65 speakers use integrated 25 mm dome tweeters, while the TMS69BL14 rear speakers use a 25 mm film-dome neodymium tweeter, polymer-frame construction, and a sealed sandwich-clamping mounting arrangement. The M5-800X4 uses a sealed, Element Ready chassis with conformal-coated circuit boards and molded wiring connectors.\u003c\/p\u003e\u003cp\u003eInstallation uses the included RFK-HD14M5 mounting and wiring hardware, with provisions for Bat Wing and Shark Nose fairings. The rear speaker installation requires cutting factory ABS plastic saddlebag lids using the supplied templates; fiberglass lids and Harley-Davidson Power Lock-equipped luggage are not compatible. Have the factory radio flashed as required, use the specified tuning guidance, and verify exact motorcycle fitment before purchasing or beginning installation.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768049754303,"sku":"HD14-STG3","price":1431.27,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71I6IuKLsPL.jpg?v=1782270555"},{"product_id":"rockford-fosgate-p3v2-69","title":"Rockford Fosgate P3V2-69 6x9\" 3-Way Component Speakers","description":"\u003cp\u003eThe Rockford Fosgate P3V2-69 is a 6x9-inch, 3-way component speaker system designed for vehicles that use separate woofer, midrange, and tweeter locations. It combines dedicated 6x9-inch woofers, 2.5-inch midrange drivers, and 3\/4-inch tweeters to cover the full frequency range through separate drivers. This makes it a practical upgrade for vehicles with factory multi-speaker front-stage layouts.\u003c\/p\u003e\u003cp\u003eThis system is intended for listeners who want more defined vocals and instruments than a conventional coaxial speaker arrangement can provide. Its 49 Hz to 25 kHz frequency response, 4-ohm nominal impedance, and 89 dB sensitivity support a balanced, detailed presentation. The system is rated for 75 watts RMS and 150 watts peak power handling.\u003c\/p\u003e\u003cp\u003eEach side uses an external passive crossover network to direct appropriate frequencies to the woofer, midrange, and tweeter. The modular Multi-Configuration Crossover Chassis can be joined together or mounted as individual crossover modules when installation space is limited. Pass-through connections also support standard, bi-amplified, or tri-amplified system layouts.\u003c\/p\u003e\u003cp\u003eThe P3V2-69 uses a 6x9-inch woofer with a mica-reinforced polypropylene curvilinear cone and Santoprene half-roll surround. Rockford Fosgate's VAST 2.0 surround design increases effective cone area compared with conventional speaker designs. The included 3\/4-inch Tetolon inverted-dome tweeters offer separate flush-mount and surface-mount installation options.\u003c\/p\u003e\u003cp\u003eThis kit is well suited to a properly planned factory-location upgrade where the vehicle can accommodate separate drivers and crossover modules. It includes 6x9-inch woofers, 2.5-inch midranges, tweeters, crossover networks, midrange adapters, wiring extensions, and mounting hardware. Verify vehicle cutout dimensions, mounting depth, window clearance, and available crossover mounting space before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Component Layout:\u003c\/strong\u003e Dedicated woofer, midrange, and tweeter drivers divide sound reproduction across separate frequency ranges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75-Watt RMS Rating:\u003c\/strong\u003e Supports amplifier matching for clean, controlled output at its rated power level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular Passive Crossovers:\u003c\/strong\u003e Separate crossover sections can be combined or installed individually to suit available space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Level Selection:\u003c\/strong\u003e A 0 dB or -3 dB tweeter input helps tailor high-frequency balance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVAST 2.0 Surround Design:\u003c\/strong\u003e Increases usable cone area for greater radiating surface from the woofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Mounting Accessories:\u003c\/strong\u003e Templates, adapters, tweeter cups, wiring, connectors, and hardware support installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe system uses 6x9-inch woofers with mica-reinforced polypropylene curvilinear cones and Santoprene half-roll surrounds, plus 3\/4-inch Tetolon inverted-dome tweeters. The woofers have removable motor covers, allowing reduced mounting depth where rear clearance is limited. Twist-Lock adapters are included for the 2.5-inch midrange drivers, and both flush-mount and surface-mount cups are included for the tweeters.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle has suitable locations for a 6x9-inch woofer, 2.5-inch midrange, and 3\/4-inch tweeter before purchase. The 6x9-inch woofer requires an 8.41 by 5.71-inch cutout and 3.13 inches of mounting depth with its motor cover installed; check door-window travel and other obstructions before mounting. Use the supplied passive crossover networks for a standard passive installation, or follow the manufacturer's active-system crossover guidance when using external electronic crossovers and dedicated amplifier channels.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768056176831,"sku":"P3V2-69","price":351.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/51wiIZRyuKL.jpg?v=1782270678"},{"product_id":"rockford-fosgate-p3v2-69c2","title":"Rockford Fosgate P3V2-69C2 6x9\" 3-Way Speaker System","description":"\u003cp\u003eThe Rockford Fosgate P3V2-69C2 is a 6x9-inch, 4-ohm 3-way coaxial\/component speaker system designed for vehicles with separate locations for a larger woofer and a smaller coaxial speaker. It combines dedicated 6x9-inch woofers with 2.5-inch coaxial speakers to replace multi-location factory speaker arrangements. The system is intended for an OEM-style upgrade where preserving separate speaker positions is important.\u003c\/p\u003e\u003cp\u003eThis package suits drivers updating a factory system that uses 6x9-inch lower speakers and separate small upper speakers. Each set includes two 6x9-inch speakers, two 2.5-inch coaxial speakers, woofer crossover networks, bass blockers, adapters, and installation hardware. The 4-ohm design is compatible with common aftermarket car-audio amplifiers and factory-replacement speaker applications when fitment and power are verified.\u003c\/p\u003e\u003cp\u003eRated for 75 watts RMS and 150 watts peak power handling, the P3V2-69C2 is built for clear, controlled playback across a stated 49 Hz to 25 kHz frequency range. The 6x9-inch woofers handle the lower range while the 2.5-inch coaxial speakers cover midrange and high-frequency duties. Its 89 dB sensitivity rating at 1 watt\/1 meter supports solid output with appropriately matched power.\u003c\/p\u003e\u003cp\u003eRockford Fosgate uses modular passive crossover sections to support flexible routing and installation. The woofer low-pass network is rated at 1.2 kHz at 6 dB per octave, while the system also includes 33 µF non-polarized bass blockers. The coaxial section incorporates a 3\/4-inch Tetolon inverted-dome tweeter along with an additional 3\/8-inch tweeter element.\u003c\/p\u003e\u003cp\u003eFor physical integration, the 6x9-inch woofer has a removable motor cover and a listed mounting depth of 3.13 inches with the cover installed. The included 2.5-inch Twist-Lock adapters support front- or rear-loading installation options for the smaller coaxial speakers. This makes the P3V2-69C2 a practical choice for a multi-speaker factory-location upgrade, provided the vehicle has the required mounting locations and clearance.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial\/Component Layout:\u003c\/strong\u003e Combines 6x9-inch woofers with 2.5-inch coaxial speakers for separate factory speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching up to its 75-watt RMS rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Nominal Impedance:\u003c\/strong\u003e Works with many common car-audio speaker outputs and amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular Crossover Networks:\u003c\/strong\u003e Allows the woofer crossover sections to be mounted together or separately as space permits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Motor Cover:\u003c\/strong\u003e Reduces woofer mounting depth when additional rear clearance is needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Installation Components:\u003c\/strong\u003e Supplies adapters, templates, wiring extensions, connectors, bass blockers, and mounting hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe 6x9-inch woofer uses a mica-reinforced polypropylene curvilinear cone, Santoprene half-roll surround, Nomex spider, and glass-fiber-reinforced PA66 composite basket. Its motor assembly uses a vented Kapton voice-coil former, overhung voice coil, and Y35 ferrite motor structure. The 2.5-inch coaxial speakers incorporate a 3\/4-inch Tetolon inverted-dome tweeter arrangement for the high-frequency portion of the system.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's speaker locations, cutout dimensions, mounting depth, and front-side clearance before installation. Use the supplied 2.5-inch Twist-Lock adapters where appropriate, route the supplied crossover wiring extensions securely, and observe speaker polarity throughout the installation. For an amplified active setup, Rockford Fosgate lists 400 Hz high-pass filtering for the 2.5-inch coaxials and an 80-400 Hz band-pass range for the 6x9-inch woofers, using 18 or 24 dB-per-octave slopes as starting points.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768056275135,"sku":"P3V2-69C2","price":286.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/51BaVYZaCbL.jpg?v=1782270680"},{"product_id":"rockford-fosgate-p3v2-69c3","title":"Rockford Fosgate P3V2-69C3 6x9-Inch 3-Way Component System","description":"\u003cp\u003eThe Rockford Fosgate P3V2-69C3 is a 6x9-inch, 3-way coaxial\/component speaker system designed for vehicles that use separate larger woofers and compact dash or upper-door speakers. It combines a pair of 6x9-inch woofers with a pair of 3.5-inch 3-way coaxial speakers to replace multiple factory drivers as one matched system. This approach helps address the limited bass output and reduced high-frequency detail common with basic OEM speaker arrangements.\u003c\/p\u003e\u003cp\u003eThis system is intended for shoppers upgrading compatible factory door and dash locations while retaining an OEM-oriented installation layout. The included 3.5-inch twist-lock adapters support several mounting-tab configurations, but vehicle fitment must still be verified before purchase. Its 4-ohm nominal impedance makes it suited to compatible aftermarket amplifiers and many conventional car-audio installations.\u003c\/p\u003e\u003cp\u003eThe P3V2-69C3 is rated for 75 watts RMS and 150 watts peak power handling, with a published system frequency response of 49 Hz to 25 kHz. The 6x9-inch woofers handle the lower range while the 3.5-inch coaxial speakers add midrange and high-frequency reproduction. The result is a system built to provide more complete coverage than a single pair of coaxial speakers in the same vehicle locations.\u003c\/p\u003e\u003cp\u003eIts woofers use mica-reinforced polypropylene cones, Santoprene rubber surrounds, Nomex spiders, and ferrite motor structures. Rockford Fosgate's VAST 2.0 surround design increases effective cone area, while the removable woofer motor cover can help with clearance in tighter installations. The 3.5-inch coaxial speakers incorporate a 3\/4-inch Tetolon inverted-dome tweeter and a 3\/8-inch polypropylene piezo super tweeter.\u003c\/p\u003e\u003cp\u003eThe supplied passive woofer networks and non-polarized bass blockers divide the system so the smaller coaxial speakers are protected from lower-frequency content. Modular crossover connections allow the woofer crossover sections to be mounted together or separately when installation space is limited. For a complete upgrade, pair the system with appropriate wiring, secure mounting, and amplification or a receiver that can operate safely with 4-ohm speakers.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue 3-Way Layout:\u003c\/strong\u003e Combines 6x9-inch woofers with 3.5-inch coaxial speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75-Watt RMS Rating:\u003c\/strong\u003e Supports properly matched amplified car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVAST 2.0 Surround:\u003c\/strong\u003e Increases usable woofer cone area for output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular Woofer Crossovers:\u003c\/strong\u003e Allows flexible crossover placement during installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwist-Lock Adapters:\u003c\/strong\u003e Supports several 3.5-inch OEM-style mounting arrangements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Motor Covers:\u003c\/strong\u003e Helps the 6x9-inch woofers fit tighter locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe 6x9-inch woofers use mica-reinforced polypropylene cones, Santoprene rubber surrounds, linear Nomex spiders, and glass-fiber-reinforced composite baskets. A Y35 ferrite magnet motor structure and vented Kapton voice-coil former support the woofer assembly, while the 3.5-inch coaxial drivers use a Tetolon inverted-dome tweeter and polypropylene piezo super tweeter. Grilles and trim rings are not included.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's speaker locations, cutout dimensions, mounting depth, and window or mechanism clearance before installation. The woofer cutout is 8.41 by 5.71 inches, and the standard woofer mounting depth is 3.13 inches; the 3.5-inch coaxial speakers use included twist-lock adapters for front- or rear-loading arrangements. Install the supplied bass blockers inline with the positive lead for the 3.5-inch speakers, observe speaker polarity, and mount the passive woofer crossovers securely.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768056438975,"sku":"P3V2-69C3","price":286.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/51TjIyMhU7L.jpg?v=1782270682"},{"product_id":"rockford-fosgate-p2v2-69ho","title":"Rockford Fosgate P2V2-69HO 6x9\" Convertible Speakers","description":"\u003cp\u003eThe Rockford Fosgate P2V2-69HO is a pair of 6x9-inch, 2-way convertible car speakers designed for vehicles that use a 2-ohm factory speaker load. It provides an upgrade path for systems that need stronger output while retaining flexible installation options. The pair can be configured as coaxial speakers or as a component-style system with separately mounted tweeters.\u003c\/p\u003e\u003cp\u003eThis design is well suited to vehicles with a single 6x9-inch speaker location as well as vehicles with dedicated dash or A-pillar tweeter locations. With the tweeters locked into the woofers, the system functions as a conventional coaxial setup. When the tweeters are removed and installed separately, the system can support improved front-stage placement.\u003c\/p\u003e\u003cp\u003eEach speaker is rated for 75 watts RMS and 150 watts peak power handling, with a 2-ohm nominal impedance. The 45 Hz to 25 kHz frequency response covers midbass through high-frequency detail. A 90 dB sensitivity rating at 1 watt\/1 meter supports efficient output from a compatible audio system.\u003c\/p\u003e\u003cp\u003eRockford Fosgate uses its I.L.M. Interchangeable Locking Mechanism to let the tweeter lock into or release from the woofer-mounted cup. The system includes an internal high-pass crossover for coaxial use and external passive crossover networks for separated-tweeter installation. External crossover settings provide 0 dB or -3 dB tweeter attenuation for system tuning.\u003c\/p\u003e\u003cp\u003eThe P2V2-69HO uses a mica-reinforced polypropylene curvilinear cone, Santoprene half-roll surround, and a glass-fiber-reinforced composite basket. Its removable motor cover helps reduce required mounting depth in space-constrained locations. It is a practical choice for a compatible 2-ohm OEM replacement or a custom front-speaker upgrade where fitment and wiring are verified first.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConvertible Configuration:\u003c\/strong\u003e Lock the tweeter in place for coaxial use or remove it for component-style installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm High Output:\u003c\/strong\u003e Designed for compatible factory-replacement and upgraded car-audio applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75-Watt RMS Rating:\u003c\/strong\u003e Handles 75 watts RMS per speaker for amplifier-matched systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon Inverted-Dome Tweeter:\u003c\/strong\u003e Provides dedicated high-frequency reproduction with flexible mounting options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal And External Crossovers:\u003c\/strong\u003e Supports either integrated-tweeter or separately mounted-tweeter configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Motor Cover:\u003c\/strong\u003e Helps accommodate installations with limited mounting depth.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P2V2-69HO combines a 20-40% mica-reinforced polypropylene curvilinear cone with a Santoprene half-roll surround and a 15% glass-fiber-reinforced PA66 composite basket. The surround is chemically bonded to the cone body, while the speaker uses a linear Nomex spider, braided tinsel leads, an overhung voice coil, and a Y35 ferrite motor structure. A vented Kapton voice-coil former is used to support heat dissipation.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's 6x9-inch mounting location, 8.41 x 5.71-inch cutout requirement, available depth, and 2-ohm system compatibility before installation. Standard mounting depth is 3.13 inches, while removing the motor cover reduces minimum mounting depth to 2.55 inches. Use the included phase plugs when relocating the tweeters, install the supplied passive crossovers for external-tweeter use, and note that grilles are not included.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768056602815,"sku":"P2V2-69HO","price":188.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/51sNyWqI2UL.jpg?v=1782270687"},{"product_id":"rockford-fosgate-p2v2-69","title":"Rockford Fosgate P2V2-69 6x9\" 2-Way Convertible Speakers","description":"\u003cp\u003eThe Rockford Fosgate P2V2-69 is a pair of 6x9-inch, 4-ohm convertible car speakers designed for upgrades where fitment and system flexibility both matter. Its removable tweeters allow the set to work as a conventional coaxial speaker or as a separated two-way component system. This gives installers a practical way to retain a factory-style speaker location or move the tweeters higher in the vehicle for a different presentation.\u003c\/p\u003e\u003cp\u003eThese speakers suit vehicles with a single 6x9-inch speaker location as well as vehicles that provide separate dash, sail-panel, or A-pillar tweeter locations. In coaxial configuration, the tweeter remains mounted in the woofer for a straightforward installation. In component configuration, the tweeter is removed and installed in an included flush- or surface-mount cup.\u003c\/p\u003e\u003cp\u003eThe P2V2-69 is rated for 75 watts RMS and 150 watts peak per speaker, with a 45 Hz to 25 kHz frequency response. Its 90 dB sensitivity rating at 1W\/1m supports useful output from a compatible aftermarket amplifier or suitable factory-replacement system. The 6x9-inch format provides broad midbass capability while the separate 3\/4-inch tweeter handles high-frequency detail.\u003c\/p\u003e\u003cp\u003eRockford Fosgate uses its Interchangeable Locking Mechanism to secure or release the tweeter from the woofer assembly. The woofer combines a curvilinear mica-reinforced polypropylene cone with a Santoprene half-roll surround and VAST 2.0 surround geometry. A removable motor cover can help accommodate installations with limited rear clearance.\u003c\/p\u003e\u003cp\u003eWhen the tweeter is moved to a separate location, the included phase plug installs in the woofer and the included external passive crossover is used for the tweeter connection. The external crossover provides a 9 kHz high-pass filter and selectable 0 dB or -3 dB tweeter attenuation. This makes the P2V2-69 a flexible option for a factory speaker replacement, a two-way component upgrade, or a system that may later add compatible P3V2-25 midrange speakers.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConvertible Two-Way Design:\u003c\/strong\u003e Use the set as coaxial speakers or separate components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI.L.M. Tweeter Lock:\u003c\/strong\u003e Removes and secures tweeters without changing the woofer location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Handling:\u003c\/strong\u003e Matches well with appropriately powered aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVAST 2.0 Surround:\u003c\/strong\u003e Increases effective cone area within the speaker frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Passive Crossovers:\u003c\/strong\u003e Support remote tweeter mounting with selectable attenuation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Motor Cover:\u003c\/strong\u003e Reduces required rear mounting depth in tight locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P2V2-69 uses a 20-40% mica-reinforced polypropylene curvilinear woofer cone, Santoprene half-roll surround, 15% glass-fiber-reinforced PA66 composite basket, and 3\/4-inch Tetolon inverted-dome tweeter. The cone and surround are chemically bonded, while the woofer uses a vented Kapton voice-coil former, Nomex spider, and ferrite motor structure. Copper spring contacts in the flush and surface tweeter cups allow the tweeters to be serviced from the front.\u003c\/p\u003e\u003cp\u003eConfirm the 8.41 x 5.71-inch cutout and 3.13-inch mounting-depth requirements before purchase; removing the motor cover reduces the mounting depth to 2.55 inches. For coaxial use, install the speaker with its tweeter locked in place. For component use, relocate each tweeter using an included cup, install the supplied phase plug in the woofer, and connect the external passive crossover as directed; grilles are not included and are sold separately.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768056832191,"sku":"P2V2-69","price":188.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/51sNyWqI2UL_de194788-375c-4dcd-99c3-b058bba24ecf.jpg?v=1782270693"},{"product_id":"rockford-fosgate-gs-69","title":"Rockford Fosgate GS-69 6x9\" Surface-Mount Speaker Grilles","description":"\u003cp\u003eThe Rockford Fosgate GS-69 is a pair of surface-mount grilles made for compatible 6x9-inch Punch speakers. It provides a finished, protective cover for custom speaker installations where the grille sits on top of the mounting surface. This accessory is intended for vehicle audio builders who want a clean presentation without converting to a flush-mount setup.\u003c\/p\u003e\u003cp\u003eThese grilles are designed specifically for select Rockford Fosgate P1V2, P2V2, P3V2, and Punch Pro V2 6x9-inch speaker models. They are not speakers themselves and do not add power handling or change the electrical requirements of the audio system. Their role is to protect the installed speaker while completing the visible portion of the installation.\u003c\/p\u003e\u003cp\u003eThe GS-69 uses a surface-mount format with a 1.26-inch mounting height, making it suitable when there is sufficient room above the speaker location. The assembly incorporates a grille bezel and grille mesh for a coordinated appearance. A keyed mesh alignment design helps position the grille correctly before it snaps into place.\u003c\/p\u003e\u003cp\u003eFor system upgrades, the GS-69 is a practical finishing accessory for a compatible Rockford Fosgate 6x9-inch speaker installation. It uses the same speaker cutout template as the matching speaker, so it is suited to planned custom panels and replacement installations. The speaker is secured to the panel before the grille is attached over it.\u003c\/p\u003e\u003cp\u003eEach package is configured as a pair for left and right speaker locations. The supplied cutout template supports layout work, while the installation procedure calls for the grille logo to be oriented correctly before snapping the mesh into the bezel. For GS-69 applications, the manufacturer specifies use of the screws included with the compatible speaker.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Fitment:\u003c\/strong\u003e Sized for select Rockford Fosgate 6x9-inch Punch speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface-Mount Format:\u003c\/strong\u003e Mounts above the panel for a visible finished appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSnap-In Grille Mesh:\u003c\/strong\u003e Keyed mesh aligns and snaps into the installed bezel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker Protection:\u003c\/strong\u003e Covers the speaker face in exposed custom installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair Configuration:\u003c\/strong\u003e Includes two grille meshes and two grille bezels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShared Cutout Template:\u003c\/strong\u003e Uses the matching speaker cutout template for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GS-69 assembly consists of separate grille mesh and grille bezel components. Its surface-mount geometry measures 7.48 by 10.04 inches overall and projects 1.26 inches from the mounting surface. Rockford Fosgate specifies a keyed grille-mesh alignment and a snap-in final attachment for a clean installed result.\u003c\/p\u003e\u003cp\u003eConfirm that the speaker is one of the listed compatible models and check for obstructions behind the mounting panel before cutting. Use the compatible speaker cutout template, pull speaker wiring through the opening, secure the speaker with its included screws, and then align and snap the grille into place. A drill with hole saw or jigsaw, screwdriver, pencil or marker, and measuring tape are identified for installation.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768059027647,"sku":"GS-69","price":40.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81L2jKIpV1L_7a461f0a-645b-440d-a58d-7e18a805ee72.jpg?v=1782270731"},{"product_id":"rockford-fosgate-hd14-stg5","title":"Rockford Fosgate HD14-STG5 6.5\", 6x9\", 10\" Harley Audio Kit","description":"\u003cp\u003eThe Rockford Fosgate HD14-STG5 is a vehicle-specific amplified audio upgrade for select 2014-2023 Harley-Davidson Street Glide and Road Glide motorcycles. It combines fairing speakers, saddlebag speakers, dual saddlebag subwoofers, two amplifiers, and installation hardware in one matched system. The kit is intended for riders who want fuller music reproduction than a front-speaker-only setup can provide.\u003c\/p\u003e\u003cp\u003eThis six-speaker system places 6.5-inch two-way speakers in the fairing, 6x9-inch speakers in the saddlebag lids, and a 10-inch subwoofer enclosure in each saddlebag. That layout supports clear upper frequencies up front, added midbass and rear fill from the bag lids, and dedicated low-frequency output from the subwoofers. It is designed around the factory Harley-Davidson mounting locations rather than universal speaker placement.\u003c\/p\u003e\u003cp\u003eTwo Rockford Fosgate M5-800X4 external amplifiers provide the system's listed 1,600-watt total power. These four-channel, Class-AD amplifiers use Element Ready construction and IPX6 water-spray protection for powersports use. Adjustable crossovers, Punch EQ, and the C.L.E.A.N. input\/output clip-indicator system provide setup tools for a properly matched installation.\u003c\/p\u003e\u003cp\u003eThe TMS65 fairing speakers use a 6.5-inch two-way design with an integrated 25 mm dome tweeter. The TMS69BL14 saddlebag kit adds 6x9-inch two-way speakers to factory Harley-Davidson ABS hard saddlebags. The HD14-SBSUB enclosure system maintains separate air space for the bag-lid speakers and the 10-inch subwoofers.\u003c\/p\u003e\u003cp\u003eThe HD14-STG5 is a focused upgrade path for compatible touring motorcycles with factory-fit, non-stretched saddlebags. Its plug-and-play harness approach is intended to reduce custom wiring work, while the subwoofer modules can be removed without tools when saddlebag cargo space is needed. A factory-radio flash is required when using this kit with the factory radio.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix-Speaker Layout:\u003c\/strong\u003e Combines fairing, saddlebag-lid, and subwoofer drivers for full-system coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 10-Inch Bass System:\u003c\/strong\u003e Adds dedicated low-frequency output from saddlebag-mounted subwoofer enclosures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo M5-800X4 Amplifiers:\u003c\/strong\u003e Supplies separate external amplification for the matched speaker system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory-Fit Integration:\u003c\/strong\u003e Uses vehicle-specific mounting points, harnesses, and trim components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElement Ready Construction:\u003c\/strong\u003e Amplifiers are IPX6 rated for water-spray resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Subwoofers:\u003c\/strong\u003e Lets riders reclaim saddlebag space without tools when needed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe HD14-STG5 uses purpose-built motorcycle components for compatible Harley-Davidson touring applications. The TMS65 fairing speakers include application-specific grilles, while the TMS69BL14 kit is designed for factory Harley-Davidson ABS hard saddlebags. The M5 amplifiers use compact external chassis designs with protected harness connections and IPX6 water-spray ratings.\u003c\/p\u003e\u003cp\u003eConfirm motorcycle fitment, saddlebag configuration, and existing audio equipment before ordering. The HD14-SBSUB portion is intended for OEM non-stretched bags and does not fit bags with the OEM power-locking system or a factory saddlebag amplifier. Use the supplied vehicle-specific installation kits, follow Rockford Fosgate tuning guidance, and arrange the required factory-radio flash before setup.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768059486399,"sku":"HD14-STG5","price":3564.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61NoHU7Ym5L.jpg?v=1782270741"},{"product_id":"rockford-fosgate-hd9813rg-stg3","title":"Rockford Fosgate HD9813RG-STG3 6.5\"\/6x9\" Road Glide Audio Kit","description":"\u003cp\u003eThe Rockford Fosgate HD9813RG-STG3 is a Stage 3 motorcycle audio upgrade designed for select 1998–2013 Harley-Davidson Road Glide models. It combines two 6.5-inch fairing speakers, two 6x9-inch saddlebag speakers, a four-channel amplifier, and a model-specific installation kit. The package is intended for riders who want a complete amplified speaker upgrade while retaining a factory-style layout.\u003c\/p\u003e\u003cp\u003eThe front TMS6RG speakers fit Road Glide fairing locations and use integrated 25 mm tweeters for full-range playback. Rear TMS69 speakers are installed through the included TMS69BL9813 saddlebag retrofit kit. Together, the four-speaker layout adds front-stage clarity and rear fill for music playback in an exposed riding environment.\u003c\/p\u003e\u003cp\u003ePower comes from the included M5-800X4 four-channel Element Ready amplifier. Its CTA-2006 continuous rating is 100 watts RMS per channel into either 4- or 2-ohm loads, while its dynamic rating reaches 200 watts per channel at 2 ohms. Adjustable crossovers, Punch EQ, and C.L.E.A.N. clip indicators provide practical setup tools for matching the amplifier to the motorcycle audio system.\u003c\/p\u003e\u003cp\u003eThe kit is built around motorcycle-specific components made to address weather exposure, vibration, dust, UV, and water spray. The amplifier carries an IPX6 rating, while the speakers use weather-resistant materials including Santoprene surrounds and reinforced frames. The saddlebag speaker kit uses a clamping gasket arrangement and protective grilles for its bag-lid installation.\u003c\/p\u003e\u003cp\u003eHD9813RG-STG3 is a system-focused upgrade rather than a replacement radio. The amplifier wiring kit, brackets, harnesses, rear speaker connections, and hardware are included to support installation with the kit's components. A Rockford Fosgate PMX-HD9813 digital media receiver can be added separately as a source-unit upgrade.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Speaker System:\u003c\/strong\u003e Includes two 6.5-inch fairing speakers and two 6x9-inch saddlebag speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM5-800X4 Amplifier:\u003c\/strong\u003e Four-channel amplifier supplies dedicated power to each included speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoad Glide Fitment:\u003c\/strong\u003e Designed for select 1998–2013 Road Glide fairing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElement Ready Construction:\u003c\/strong\u003e Components are designed for water, UV, dirt, vibration, and corrosion exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Installation Kit:\u003c\/strong\u003e Includes vehicle-specific wiring, mounting brackets, harnesses, and fused distribution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Amplifier Controls:\u003c\/strong\u003e High-pass, low-pass, Punch EQ, and clip indicators support system setup.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TMS6RG fairing speakers use polypropylene-carbon-fiber hybrid cones, Santoprene VAST surrounds, metalized-film dome tweeters, and neodymium motor structures. The TMS69 saddlebag speakers use carbon-fiber cones, Santoprene VAST surrounds, film dome tweeters, reinforced polymer frames, and painted stamped-steel grilles with ASA plastic frames. The M5-800X4 amplifier uses an Element Ready sealed chassis design with a die-cast aluminum heat sink and covered top-mounted controls.\u003c\/p\u003e\u003cp\u003eConfirm motorcycle fitment before ordering, especially on CVO and Screaming Eagle models, which may require modification. The TMS69BL9813 rear kit is intended for compatible factory ABS plastic hardshell saddlebag lids and is not compatible with fiberglass lids or the Harley-Davidson Power Lock Kit. Use the supplied harnesses and brackets for the intended installation, maintain at least 2 inches of clearance below each saddlebag speaker magnet, and set amplifier crossover and level controls during final system tuning.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768059650239,"sku":"HD9813RG-STG3","price":1660.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/611YETDrtnL.jpg?v=1782270746"},{"product_id":"rockford-fosgate-hd9813rk-stage2","title":"Rockford Fosgate HD9813RK-STAGE2 6x9\" Road King Audio Kit","description":"\u003cp\u003eThe Rockford Fosgate HD9813RK-STAGE2 is a motorcycle audio upgrade package for select 1998-2013 Harley-Davidson Road King models. It adds a pair of 6x9-inch saddlebag-lid speakers, a compact four-channel amplifier, Bluetooth audio reception, and the required installation hardware. The package is intended for riders who want amplified audio without giving up more saddlebag space than necessary.\u003c\/p\u003e\u003cp\u003eThe system is built around two TMS69BL9813 6x9-inch coaxial speakers mounted in compatible factory saddlebag lids. Their carbon-fiber cones, film-dome tweeters, and weather-conscious construction are designed for motorcycle use. With 100 watts RMS handling per speaker, the pair is matched to the included amplifier's four-channel output.\u003c\/p\u003e\u003cp\u003ePower comes from the TM400X4ad Element Ready Class-AD amplifier, rated for 400 watts RMS total. Its constant-power design provides 100 watts RMS per channel at either 2 or 4 ohms, while adjustable high-pass and low-pass filtering supports system tuning. High- and low-level inputs, clip indicators, and dual-fan cooling help support integration and setup.\u003c\/p\u003e\u003cp\u003eBluetooth streaming is handled by the included RFBTRCA receiver, allowing a compatible phone or other Bluetooth device to send audio to the amplifier through stereo RCA connections. The receiver uses one-button pairing and reconnects automatically after initial pairing. Its wired 9-16VDC connection and dash- or surface-mount design suit a dedicated motorcycle audio installation.\u003c\/p\u003e\u003cp\u003eThe included RFK-HDRK installation hardware mounts the amplifier in the rear of the saddlebag and provides a plug-and-play wiring approach for the intended Road King application. A prewired expansion connection is provided for compatible lower-speaker additions. This makes the kit a focused rear-speaker audio upgrade and a foundation for a broader Rockford Fosgate motorcycle system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Stage 2 Package:\u003c\/strong\u003e Includes speakers, amplifier, Bluetooth receiver, wiring, mounting parts, grilles, and hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Bag-Lid Speakers:\u003c\/strong\u003e Adds full-range rear audio through compatible factory ABS plastic saddlebag lids.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400-Watt RMS Amplifier:\u003c\/strong\u003e Four-channel Class-AD power supports the included speakers with adjustable filtering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Streaming:\u003c\/strong\u003e Lets compatible phones send wireless audio directly to the amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug-And-Play Harness:\u003c\/strong\u003e Uses dedicated Harley-Davidson wiring integration for the intended application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower-Speaker Expansion:\u003c\/strong\u003e Includes a prewired connection for compatible front lower speaker additions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TMS69BL9813 speakers use carbon-fiber cones, Santoprene rubber surrounds, film-dome tweeters, reinforced polymer frames, and UV-conscious grille materials. The TM400X4ad amplifier uses a conformal-coated circuit board, dual extruded heat sinks, dual-fan cooling, and real-time thermal protection. These components are designed for the vibration, moisture, dust, and outdoor exposure associated with motorcycle use.\u003c\/p\u003e\u003cp\u003eThis kit is intended for select 1998-2013 Road King motorcycles equipped with inner-opening plastic saddlebags and compatible ABS plastic lids. The saddlebag speaker retrofit uses the included template, mounts, grilles, harnesses, and hardware; it is not compatible with leather-equipped models or fiberglass saddlebag lids. Verify the specific motorcycle trim and existing audio configuration before installation, and use the included amplifier mounting and wiring kit for the designed fitment.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768059683007,"sku":"HD9813RK-STAGE2","price":1215.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/719hMxZltCL.jpg?v=1782270748"},{"product_id":"rockford-fosgate-hd24bl69","title":"Rockford Fosgate HD24BL69 6x9\" Saddlebag Speaker Kit","description":"\u003cp\u003eThe Rockford Fosgate HD24BL69 is a 6x9-inch saddlebag-lid cut-in speaker kit for select 2024 and newer Harley-Davidson Touring motorcycles. It is designed for riders adding rear audio to compatible factory H-D ABS saddlebags rather than replacing an existing factory speaker-lid assembly. The kit combines a pair of TMS24-69 2-way speakers with the mounting, cutting, grille, and harness components needed for the saddlebag-lid conversion.\u003c\/p\u003e\u003cp\u003eThis kit is intended for compatible Harley-Davidson models using Skyline OS and factory ABS saddlebags. Its cut-in design lets the speakers mount high in the lid area to help preserve usable saddlebag space. Confirm the exact motorcycle, factory audio configuration, and saddlebag type against the Rockford Fosgate fitment chart before purchase.\u003c\/p\u003e\u003cp\u003eEach included TMS24-69 speaker uses a long-throw 6x9-inch woofer design intended to provide extended low-frequency response while maintaining clear upper-frequency output. The 2-way speakers are rated at 150 watts RMS and 300 watts maximum each at 4 ohms. Their 50 Hz to 20 kHz frequency response and 91.4 dB sensitivity support use in a properly matched motorcycle audio system.\u003c\/p\u003e\u003cp\u003eThe HD24BL69 uses a top-loading bucket and self-centering backer arrangement for cutting and mounting through the bag lid. The bucket, backer, gasketed fasteners, and grille system create a structured mounting surface around the speaker opening. Precision left- and right-side templates with external ribs are included to guide the required lid cuts.\u003c\/p\u003e\u003cp\u003eFor motorcycle use, the speakers and installation system are built around Rockford Fosgate's Element Ready approach to water, dust, UV exposure, corrosion, vibration, and temperature changes. The kit includes internal and external harnesses with watertight protection using Molex MX150 and Deutsch DT connections. It is a useful rear-speaker expansion for a compatible amplified Harley-Davidson audio upgrade, but it does not include an amplifier or radio.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Rear Speaker Kit:\u003c\/strong\u003e Adds two rear saddlebag-lid speakers to compatible factory H-D ABS saddlebags.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTMS24-69 Speakers:\u003c\/strong\u003e Includes a pair of 2-way, 4-ohm Element Ready motorcycle speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150-Watt RMS Rating:\u003c\/strong\u003e Each speaker handles up to 150 watts RMS when properly matched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop-Loading Bucket System:\u003c\/strong\u003e Uses a bucket and backer design for the required lid cut-in installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Cutting Templates:\u003c\/strong\u003e Left and right templates help position cuts on compatible saddlebag lids.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather-Managed Harnessing:\u003c\/strong\u003e Internal and external harnesses use protected OEM-style connection systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe included TMS24-69 speakers use curvilinear polypropylene cones with 10% carbon fill, Santoprene VAST surrounds, Poly-Nomex spiders, UV-stable Domamid PA66 composite baskets, dual neodymium motors, and vented Kapton voice-coil formers. An integrated concealed crossover, 4 kHz 12 dB-per-octave crossover network, corrosion-resistant tin-plated terminals, and an integrated motor cover are part of the speaker design. The kit also includes bag-lid grilles that follow the compound contours of the compatible lid design.\u003c\/p\u003e\u003cp\u003eInstallation requires cutting compatible factory Harley-Davidson ABS saddlebag lids using the supplied templates, then fitting the left and right buckets, backers, speakers, grilles, and harnesses. Rockford Fosgate lists drill, jigsaw or air saw, drill bits, hole saw, hand tools, and masking tape among the required installation tools. Because fitment is vehicle- and factory-audio-specific, professional installation or careful review of the official instructions and fitment chart is recommended.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768059814079,"sku":"HD24BL69","price":688.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71YeaSFGpeL.jpg?v=1782270752"},{"product_id":"rockford-fosgate-tms24-69","title":"Rockford Fosgate TMS24-69 6x9\" Harley Saddlebag Speakers","description":"\u003cp\u003eThe Rockford Fosgate TMS24-69 is a pair of 6x9-inch, 2-way saddlebag speakers made for select Harley-Davidson motorcycle audio upgrades. They provide a purpose-built replacement or expansion path for compatible factory speaker-lid locations and Rockford Fosgate bag-lid cut-in systems. Their design addresses the need for stronger, clearer rear-stage sound in a motorcycle environment where wind, road noise, weather, and vibration are constant factors.\u003c\/p\u003e\u003cp\u003eThese Gen-2 TMS speakers use a long-throw woofer design intended to extend low-frequency output while maintaining controlled midrange and high-frequency detail. With 150 watts RMS power handling per speaker, they are suited to amplified motorcycle systems that need substantial output. The 50 Hz to 20 kHz frequency response supports full-range playback from bass and vocals through upper treble.\u003c\/p\u003e\u003cp\u003eRockford Fosgate combines a large 1.5-inch voice coil, vented Kapton voice-coil former, radiator ring, and heat-resistant motor structure to support power handling and thermal management. A dual-neodymium motor helps provide motor strength in a compact format for fitment in motorcycle saddlebag-lid applications. The integrated concealed crossover eliminates the need for separate external crossover boxes.\u003c\/p\u003e\u003cp\u003eDurability is central to the TMS24-69 design. Its Element Ready construction is IPX6 rated and uses materials selected for outdoor motorcycle use, including a UV-stable composite basket, moisture-resistant spider, Santoprene VAST surround, and corrosion-resistant terminals. These details help the speakers withstand exposure to water, UV, vibration, and changing road conditions.\u003c\/p\u003e\u003cp\u003eThe TMS24-69 is intended for compatible 2024+ Harley-Davidson applications using the HD24BL69 system, including direct drop-in use for 2024+ CVO Road Glide and CVO Street Glide factory speaker-lid locations. It is also compatible with select earlier Harley-Davidson models equipped with compatible Rockford Fosgate 6x9-inch bag-lid cut-in kits. Pair it with an appropriately matched Rockford Fosgate TM, M5, or TMA compact amplifier for an integrated motorcycle audio upgrade.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch 2-Way Design:\u003c\/strong\u003e Provides full-range sound in a saddlebag-lid speaker format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150-Watt RMS Handling:\u003c\/strong\u003e Supports amplified systems with substantial continuous power capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-Throw Woofer:\u003c\/strong\u003e Helps deliver extended low-frequency response and output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Concealed Crossover:\u003c\/strong\u003e Keeps crossover components within the speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX6 Element Ready Construction:\u003c\/strong\u003e Built for exposure to water, UV, vibration, and dirt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-Fit Compatibility:\u003c\/strong\u003e Works with specified Harley-Davidson locations and Rockford cut-in kits.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TMS24-69 uses a curvilinear poly cone with 10% carbon fill, a Santoprene VAST surround, and a breathable Poly-Nomex spider. Its Domamid PA66 composite basket is UV stable and reinforced with 30% glass fiber, while the dual-neodymium motor and integrated motor cover are designed for compact, durable saddlebag-lid use. Braided stitched tinsel leads and tin-plated terminals support reliable connections in a vibration-prone environment.\u003c\/p\u003e\u003cp\u003eConfirm motorcycle, saddlebag, audio-system, and bag-lid compatibility before purchase. The pair includes mounting hardware and eight M4 x 1.4, 15.5 mm Phillips tapping screws, but speaker grilles and trim rings are not included with the TMS24-69 speaker pair. For non-cut factory saddlebags, a compatible Rockford Fosgate bag-lid cut-in kit is required; installation should follow the applicable vehicle and kit instructions.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768059977919,"sku":"TMS24-69","price":405.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61a1BVqhlbL.jpg?v=1782270756"},{"product_id":"rockford-fosgate-tms69bl14","title":"Rockford Fosgate TMS69BL14 6x9\" Harley Saddlebag Speaker Kit","description":"\u003cp\u003eThe Rockford Fosgate TMS69BL14 is a rear saddlebag-lid speaker kit designed to add 6 x 9-inch audio capability to select Harley-Davidson touring motorcycles. It uses a pair of TMS69 two-way coaxial speakers, purpose-built mounting components, and vehicle-specific harnessing for an integrated rear-audio upgrade. The kit is intended for factory hard saddlebags with compatible ABS plastic lids.\u003c\/p\u003e\u003cp\u003eThis kit is suited to riders building on an existing Harley-Davidson audio system and looking to bring sound farther back in the motorcycle. Rear speakers can help create a more balanced listening position when paired with compatible front speakers and amplification. The included main and saddlebag harnesses are designed to connect with Rockford Fosgate compact-chassis Punch or Power series amplifiers.\u003c\/p\u003e\u003cp\u003eEach included TMS69 speaker is rated at 100 watts RMS and uses a 6 x 9-inch two-way coaxial layout. A 1-inch film-dome neodymium tweeter handles high frequencies, while the larger woofer is engineered for full-range motorcycle use. The specified frequency response is 56 Hz to 20 kHz, with a 4-ohm nominal impedance.\u003c\/p\u003e\u003cp\u003eRockford Fosgate's Element Ready design addresses the outdoor conditions faced by motorcycle audio equipment. The speakers use weather-resistant construction along with a reinforced polymer frame, Santoprene components, and a neodymium motor structure. The grille assembly uses painted stamped steel with an ASA plastic frame, while a sandwich-clamping gasket design helps seal the lid installation.\u003c\/p\u003e\u003cp\u003eThe TMS69BL14 is an installation kit rather than a self-powered audio system, so it is designed to work as part of a properly matched amplified setup. It includes the speaker pair, grilles, mounting rings, cutting templates, harnesses, fasteners, cable-management hardware, and speaker protectors. The factory Harley-Davidson radio must be flashed before this kit can be used.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 x 9-Inch Coaxial Speakers:\u003c\/strong\u003e Adds a pair of rear full-range speakers to compatible saddlebag lids.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-Watt RMS Rating:\u003c\/strong\u003e Supports amplified motorcycle-audio installations with appropriate power matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElement Ready Construction:\u003c\/strong\u003e Helps resist dust, UV exposure, temperature, water, corrosion, and vibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-Connect Harnessing:\u003c\/strong\u003e Provides harness connections intended for compatible Rockford Fosgate compact amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Lid-Mounting Kit:\u003c\/strong\u003e Includes templates, rings, grilles, wiring, and installation hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Radio Flash Required:\u003c\/strong\u003e Enables rear-speaker operation through the factory Harley-Davidson radio.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe included TMS69 speakers use carbon-fiber-reinforced polypropylene cones, Santoprene VAST surrounds, Santoprene front isolation spiders, poly-cotton spiders, and 35.6 mm voice coils. Their neodymium ring-magnet motors and ultra-high-temperature glass-reinforced polymer frames are designed for motorcycle environments. Painted stamped-steel grilles with UV-resistant ASA plastic frames complete the lid-facing assembly.\u003c\/p\u003e\u003cp\u003eInstallation requires cutting the factory saddlebag lids using the supplied templates, mounting the grille, ring, and speaker assembly, and routing the included harnesses through the bags and motorcycle. The kit is compatible with select 2014-and-newer Street Glide and 2015-and-newer Road Glide motorcycles using ABS plastic lids; fiberglass lids are not supported. Leave at least 2 inches of clearance behind each speaker magnet when packing the saddlebags, and use qualified installation assistance if needed.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768077476031,"sku":"TMS69BL14","price":542.38,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71sagWqBuvL.jpg?v=1782271089"},{"product_id":"rockford-fosgate-t1692","title":"Rockford Fosgate T1692 Power 6x9\" 2-Way Speakers","description":"\u003cp\u003eThe Rockford Fosgate T1692 is a pair of 6x9-inch, 2-way coaxial full-range car speakers designed for vehicles that use this common oval speaker size. They provide a direct speaker-upgrade path for listeners who want greater power handling and a more capable driver design than many factory-installed speakers. Each speaker combines a woofer and tweeter in one assembly, helping simplify installation where a 6x9 coaxial speaker fits.\u003c\/p\u003e\u003cp\u003eRated at 100 watts RMS and 4 ohms per speaker, the T1692 is suited to a properly matched aftermarket amplifier or a system designed around higher-output speaker channels. Its 50 Hz to 22 kHz frequency-response rating covers bass, midrange, and treble duties in a full-range location. With 90 dB sensitivity at 1 watt\/1 meter, it is intended to deliver useful output while remaining compatible with conventional 4-ohm car-audio amplification.\u003c\/p\u003e\u003cp\u003eThe woofer uses an injection-molded carbon-fiber and polypropylene cone with a butyl-rubber surround. This material combination is designed to keep the cone supported during excursion while providing a durable moving assembly. A 1-inch aluminum-dome tweeter with polyurethane suspension handles upper-frequency reproduction.\u003c\/p\u003e\u003cp\u003eRockford Fosgate integrates the tweeter crossover into the speaker basket through its ICC, or Integrated Concealed Crossover, design. This avoids a separate external crossover box for the coaxial pair and keeps the installation more contained. The built-in tweeter crossover uses a 12 dB\/octave Butterworth high-pass design.\u003c\/p\u003e\u003cp\u003eThe T1692 also uses VAST surround geometry to increase effective cone area without enlarging the speaker basket. Its offset cantilever tweeter placement is intended to reduce reflections between the rear of the tweeter and the woofer cone. For a balanced upgrade, use the pair in compatible 6x9 factory locations, confirm available mounting depth, and match amplifier output to the speakers' RMS rating.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each full-range speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-Watt RMS Handling:\u003c\/strong\u003e Supports higher-powered car-audio amplification when properly matched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon-Fiber Polypropylene Cone:\u003c\/strong\u003e Provides a lightweight, reinforced woofer cone construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Aluminum Dome Tweeter:\u003c\/strong\u003e Reproduces high frequencies through a dedicated dome tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eICC Built-In Crossover:\u003c\/strong\u003e Places the tweeter crossover inside the speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVAST Surround:\u003c\/strong\u003e Increases effective cone area without increasing basket size.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe T1692 uses a carbon-fiber and polypropylene injection-molded woofer cone, butyl-rubber surround, and aluminum-dome tweeter with polyurethane suspension. Its FlexFit basket uses slotted mounting provisions to help accommodate varying factory mounting-hole positions. Grilles or trim rings are included with this model.\u003c\/p\u003e\u003cp\u003eVerify that the vehicle accepts a 6x9-inch speaker, a 5.77 by 8.51-inch cutout, and approximately 3.39 inches of mounting depth before installation. Connect each speaker with correct polarity and use an amplifier channel stable at 4 ohms; Rockford Fosgate specifies 30 to 100 watts RMS of recommended amplifier power per speaker. The built-in crossover means no separate external tweeter crossover is required for normal coaxial installation.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768081080511,"sku":"T1692","price":145.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71wAAyDFO8L.jpg?v=1782271154"},{"product_id":"rockford-fosgate-t1693","title":"Rockford Fosgate T1693 6x9\" 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Rockford Fosgate T1693 is a pair of 6x9-inch, 3-way coaxial full-range speakers designed for replacing factory vehicle speakers with a higher-power aftermarket option. They combine the woofer, tweeter, super tweeter, and crossover functions into each speaker assembly for a more straightforward installation than a separate-component system. This makes them suitable for vehicles with 6x9-inch speaker locations where a fuller frequency range is desired. Verify the vehicle's available mounting clearance and factory opening dimensions before purchase.\u003c\/p\u003e\u003cp\u003eWith a 4-ohm nominal impedance and 100 watts RMS power handling per speaker, the T1693 is intended to work with compatible aftermarket amplification as well as appropriate factory or aftermarket head-unit power. Its 3-way layout is built to divide bass, midrange, and high-frequency duties across dedicated driver elements. The result is a broad frequency response rated from 50 Hz to 22 kHz. A properly matched amplifier can provide cleaner output at higher listening levels than a head unit alone.\u003c\/p\u003e\u003cp\u003eThe woofer uses a carbon-fiber-reinforced polypropylene cone with a butyl rubber surround. This combination is intended to maintain cone stability while allowing the surround to support woofer movement. Rockford Fosgate's VAST technology increases the effective cone area without increasing the basket size. That added radiating area supports stronger low- and mid-frequency output from the existing 6x9-inch footprint.\u003c\/p\u003e\u003cp\u003eA 1-inch aluminum dome tweeter and 1\/2-inch aluminum dome super tweeter handle upper-frequency reproduction. The speakers use an integrated concealed crossover, placing the crossover within the speaker assembly rather than requiring a separate external crossover box. This helps keep the installation layout tidy in door, rear-deck, or other compatible factory locations. The 3-way coaxial format is especially useful when there is limited space for separate tweeter mounting.\u003c\/p\u003e\u003cp\u003eThe T1693 can serve as a focused upgrade in a factory-replacement system or as a rear-fill or full-range speaker pair in a larger amplified build. Its 90 dB sensitivity rating at 1 watt\/1 meter and 91 dB rating at 2.83 volts\/1 meter provide useful output with moderate power, while its RMS rating leaves room for an external amplifier. Grilles, trim rings, mounting hardware, and a pair of speakers are included. For best results, match the amplifier's clean output and crossover settings to the speakers' power capacity and vehicle installation constraints.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Combines woofer, tweeter, and super tweeter functions in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-Watt RMS Handling:\u003c\/strong\u003e Supports use with a properly matched aftermarket amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVAST Surround Technology:\u003c\/strong\u003e Increases effective cone area without enlarging the basket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Concealed Crossover:\u003c\/strong\u003e Keeps crossover components integrated into the speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon-Fiber-Reinforced Cone:\u003c\/strong\u003e Helps the polypropylene woofer maintain stability during operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Dome High-Frequency Drivers:\u003c\/strong\u003e Uses dedicated tweeter and super tweeter elements for upper frequencies.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe T1693 uses a carbon-fiber-reinforced polypropylene woofer cone, butyl rubber surround, aluminum dome high-frequency drivers, and an integrated crossover design. Its 6x9-inch oval frame is built for conventional full-range speaker positions, and the package includes grilles or trim rings for a finished appearance where appropriate. The speaker has a 4-ohm nominal impedance and a 1.2-inch voice coil. It is supplied as a stereo pair.\u003c\/p\u003e\u003cp\u003eConfirm the mounting cutout, mounting depth, window travel, panel clearance, and factory mounting pattern before installation. The required mounting cutout is 5.77 by 8.51 inches, and mounting depth is 3.39 inches. Route speaker wire before fastening the speakers, observe positive and negative terminal polarity, and use quality connectors; an external amplifier should be selected to provide clean power within the 100-watt RMS-per-speaker rating.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768081113279,"sku":"T1693","price":150.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/716XWYPJ8fL.jpg?v=1782271156"},{"product_id":"hertz-hd14h","title":"Hertz HD14H 6x9 Saddlebag Lid Speaker Kit with Harness","description":"\u003cp\u003eThe Hertz HD14H is a motorcycle saddlebag-lid speaker installation kit with a dedicated speaker harness for select Harley-Davidson touring motorcycles. It provides the hardware and wiring needed to add 6x9-inch speakers to compatible non-speaker saddlebag lids. Speakers are not included.\u003c\/p\u003e\u003cp\u003eThis kit is intended for riders building or expanding a motorcycle audio system and wanting a clean saddlebag speaker location. The included grille and mounting structure are designed to integrate into the saddlebag lids after the required cutting process. It is a practical fit for systems using Hertz SX 690 NEO.1 speakers.\u003c\/p\u003e\u003cp\u003eHD14H combines the HD14 lid-installation components with a four-part speaker wire harness. The harness is designed for plug-and-play connection within the compatible motorcycle application, helping route speaker wiring from the motorcycle to each saddlebag. Proper cable routing is important to avoid moving, hot, or pinch-prone areas.\u003c\/p\u003e\u003cp\u003eThe kit includes grilles, speaker mounting structures, cut templates, gaskets, and installation hardware for a matched left-and-right saddlebag setup. The grilles measure 6.47 by 9.19 inches and provide a finished appearance over the speaker locations. Adhesive speaker gaskets are included to help prevent water infiltration around the mounts.\u003c\/p\u003e\u003cp\u003eHD14H is an installation accessory rather than a powered audio component, so it does not have amplifier power ratings or speaker impedance specifications. Pair it with compatible 6x9-inch speakers, suitable amplification, and the appropriate motorcycle audio source equipment. Confirm motorcycle fitment and lid-lock configuration before purchase or installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Speaker Provision:\u003c\/strong\u003e Creates mounting locations for compatible 6x9-inch saddlebag speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Part Harness:\u003c\/strong\u003e Provides wiring sections for connection to both saddlebags.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHertz Speaker Match:\u003c\/strong\u003e Designed for Hertz SX 690 NEO.1 speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Mounting Hardware:\u003c\/strong\u003e Includes templates, grilles, mounts, gaskets, and screws.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Infiltration Support:\u003c\/strong\u003e Adhesive gaskets help seal the speaker-mount area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-Specific Fitment:\u003c\/strong\u003e Fits specified Harley-Davidson hard-saddlebag applications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe HD14H uses purpose-designed grilles and speaker mounting structures for a coordinated saddlebag-lid installation. Its grilles have a high-gloss black, paintable finish, while the kit is described as using weather-resistant material. The design retains use of the motorcycle's factory hinge and latch hardware where applicable.\u003c\/p\u003e\u003cp\u003eInstallation requires removal of the saddlebags and lid hardware, masking and cutting the lids with the supplied templates, mounting the grille and speaker structure, and routing the harness through a grommet opening. Hertz specifies a 3 mm pilot hole for template mounting, a 10 mm starter hole for cutting, and a 16 mm saddlebag hole for the speaker-wire grommet. The kit is not compatible with factory-equipped electric lid locks, and speakers, cable-tie mounts, audio source equipment, and amplification are not included.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":45771449565375,"sku":"HD14H","price":209.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81iwzeMg9EL_37a91552-639b-4ad9-b80e-e113b9ef281c.jpg?v=1782362629"},{"product_id":"hertz-dcx690-3","title":"Hertz DCX 690.3 6x9 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Hertz DCX 690.3 is a 6 x 9-inch three-way coaxial speaker designed for replacing compatible factory speakers in a vehicle. Its integrated woofer, midrange tweeter, and supertweeter provide a complete speaker assembly for locations that accept 6 x 9-inch drivers. It is intended for listeners who want a straightforward full-range speaker upgrade without installing separate crossover networks and individual drivers.\u003c\/p\u003e\u003cp\u003eWith 90 watts continuous power handling, 180 watts peak power handling, and a 4-ohm impedance, the DCX 690.3 can be matched with compatible car-audio amplification or a suitable factory or aftermarket receiver. Its 93 dB SPL sensitivity and 45 Hz to 21 kHz frequency-response rating describe a design built to cover bass, midrange, and treble frequencies from one mounting location. The three-way layout includes a 60 mm paper tweeter and a 15 mm PEI-dome supertweeter.\u003c\/p\u003e\u003cp\u003eThe woofer uses a water-repellent pressed-paper cone and a TPU surround. Hertz specifies high-density-flux ferrite magnets for both the woofer and tweeter, along with a 25 mm pure-copper woofer voice coil wound on a Conex former. These materials support the speaker's intended mobile-audio use while the coaxial format keeps the installation concentrated in a single 6 x 9-inch opening.\u003c\/p\u003e\u003cp\u003eHertz also equips the DCX 690.3 with a DIN-size basket finished with abrasion-resistant dust paint, tin-plated high-current terminals, and silver-plated lead wires. The motor assembly uses low-carbon-content plates, and the speaker includes a butyl-rubber protective cover for the magnet area. These construction details address the electrical connections, moving assembly, and physical protection required in an automotive installation.\u003c\/p\u003e\u003cp\u003eThis model fits naturally into an entry-level or replacement-speaker system where compatible 6 x 9-inch mounting locations are available. It can be used as a pair for front, rear, or parcel-shelf speaker positions when vehicle fitment and mounting clearance are confirmed. For a more complete system upgrade, select an amplifier or receiver that is appropriate for its 4-ohm load and 90-watt continuous power rating.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Coaxial Design:\u003c\/strong\u003e Combines woofer, tweeter, and supertweeter sections in one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 x 9-Inch Format:\u003c\/strong\u003e Fits applications designed for compatible oval 6 x 9-inch speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90W Continuous Handling:\u003c\/strong\u003e Supports power matching with compatible car-audio electronics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Uses treated pressed paper for the woofer diaphragm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTPU Surround:\u003c\/strong\u003e Provides the woofer with a flexible suspension component.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Grille:\u003c\/strong\u003e Adds a protective cover option for suitable installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DCX 690.3 combines a water-repellent pressed-paper woofer cone with a TPU surround, high-density-flux ferrite magnets, and a PEI supertweeter dome. Its 25 mm pure-copper voice coil is wound on a Conex former, while the basket uses an abrasion-resistant painted finish. Tin-plated terminals, silver-plated lead wires, low-carbon plates, epoxy motor-to-basket bonding, and a butyl-rubber protective cover are specified construction details.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's available mounting opening, mounting depth, and panel clearance before installation. Hertz lists overall dimensions of 237 x 162 mm, mounting dimensions of 224 x 153 mm, a total depth of 98 mm, and a mounting depth of 77 mm. Connect the speakers to a compatible 4-ohm amplifier or receiver, observe correct polarity, and use the included grilles where the speaker faces need protection.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":45771449794751,"sku":"DCX690-3","price":98.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/816EXKPJ_pL.jpg?v=1782362642"},{"product_id":"hertz-cpk690","title":"Hertz CPK 690 6x9\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Hertz CPK 690 is a 6x9-inch, two-way component speaker system from the Cento PRO line. It is designed for vehicles with oval 6x9 speaker locations, including many door applications common in North American vehicles. By separating the woofer and tweeter, the system allows more flexible placement than a coaxial speaker design.\u003c\/p\u003e\u003cp\u003eThis system is intended for listeners upgrading factory door speakers who want stronger midbass output and more controlled high-frequency reproduction. Its 120-watt continuous power rating and 4-ohm nominal impedance make it suitable for use with a properly matched aftermarket amplifier. The stated frequency response extends from 35 Hz to 22.5 kHz.\u003c\/p\u003e\u003cp\u003eThe CP 690 woofer uses a water-repellent pressed-paper cone with FEM-optimized geometry. Hertz combines this cone with a 30.5 mm double-layer voice coil, high-density-flux ferrite motor, low-carbon polar plates, and a three-spoke basket with a rubber magnet cover. These elements are designed to support controlled operation and power handling in a door-mounted installation.\u003c\/p\u003e\u003cp\u003eHigh frequencies are handled by the separate CP 25 tweeter, which uses a 29 mm soft Tetolon fiber dome and a neodymium magnet. Its 25 mm voice coil is ferrofluid-cooled, while the rear chamber contains damping material. The tweeter faceplate uses FEM-optimized geometry intended to support more consistent response when installed off-axis.\u003c\/p\u003e\u003cp\u003eA CPCX 690 passive crossover divides the signal between the woofer and tweeter at 3.1 kHz. It provides a 6 dB-per-octave low-pass section for the woofer and a 12 dB-per-octave high-pass section for the tweeter. The crossover's three-position tweeter-level setting helps tailor upper-frequency output to the vehicle, mounting location, and listener preference.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Component Layout:\u003c\/strong\u003e Separates woofer and tweeter for flexible placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120W Continuous Power:\u003c\/strong\u003e Supports properly matched aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed-Paper Woofer Cone:\u003c\/strong\u003e Water-repellent cone balances stiffness and low mass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e29 mm Tetolon Tweeter:\u003c\/strong\u003e Soft-dome design handles upper-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Crossover Network:\u003c\/strong\u003e Directs frequencies to the appropriate speaker driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Level Adjustment:\u003c\/strong\u003e Select -2 dB, 0 dB, or +2 dB.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CP 690 woofer combines a water-repellent pressed-paper cone, double-layer voice coil, ferrite magnet assembly, low-carbon polar plates, and a transparent three-spoke basket. The CP 25 tweeter uses a Tetolon fiber dome, neodymium magnet, ferrofluid-cooled voice coil, damped rear chamber, and FEM-optimized faceplate. The compact CPCX 690 crossover uses metallic-finish 160 V polyester-film capacitors, pure-copper inductors, and venting for heat dissipation.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle has suitable 6x9 mounting locations and adequate mounting depth before installation; the CP 690 mounting depth is listed as 85 mm. Route the amplifier or head-unit speaker output through the CPCX 690 crossover, then connect its dedicated woofer and tweeter outputs to the respective drivers. Use secure mounting, protect wiring from sharp edges and moving parts, and select the tweeter-level setting after listening from the driver's seat.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":45771449991359,"sku":"CPK690","price":259.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71ntsdFbe3L.jpg?v=1782362653"},{"product_id":"hertz-sx690neo-1","title":"Hertz SX690NEO-1 6x9\" 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Hertz SX690NEO-1 is a pair of 6x9-inch, 3-way SPL coaxial speakers designed for car-audio systems that need strong midrange and high-frequency output from a compact speaker location. Each speaker combines a 6x9 woofer, dome tweeter, and dome super tweeter in one assembly. This format helps simplify an upgrade where separate tweeter mounting is not desired.\u003c\/p\u003e\u003cp\u003eWith 130 watts continuous power handling and a 4-ohm nominal impedance, these speakers are suited to amplified systems as well as carefully matched high-output speaker installations. Their 94 dB sensitivity supports efficient output when paired with an appropriate amplifier. The specified 65 Hz to 24 kHz frequency response covers upper bass through extended high frequencies.\u003c\/p\u003e\u003cp\u003eThe SX690NEO-1 uses a 3-way coaxial layout to concentrate vocal, instrument, and treble reproduction in a single 6x9-inch mounting position. A built-in crossover directs the tweeter at 4 kHz and the super tweeter at 10 kHz, both at 6 dB per octave. A resettable solid-state protection circuit is included for the tweeter section.\u003c\/p\u003e\u003cp\u003eIts woofer uses a high-stiffness pressed-paper cone with water-repellent, humidity-resistant, and anti-UV treatments. The motor structure uses neodymium magnets, helping keep the speaker assembly relatively compact for its output class. A double-layer copper voice coil on a polyamide former supports the stated power-handling capability.\u003c\/p\u003e\u003cp\u003eThese Hertz SPL Show speakers are a practical fit for listeners building a louder full-range system with dedicated subwoofers handling the lowest bass. Hertz specifies a 60 Hz high-pass filter at 12 dB per octave for SPL-oriented operation. Double Faston terminals also support daisy-chaining multiple units where the amplifier and final impedance load are correctly planned.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Layout:\u003c\/strong\u003e Combines woofer, tweeter, and super tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e130W Continuous Handling:\u003c\/strong\u003e Supports use with appropriately matched external amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Motor System:\u003c\/strong\u003e Provides compact magnetic assemblies for the woofer and high-frequency drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather-Resistant Paper Cone:\u003c\/strong\u003e Resists water, humidity, and UV exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated High-Frequency Protection:\u003c\/strong\u003e Resettable solid-state circuitry protects the tweeter section.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProvided Protective Grille:\u003c\/strong\u003e ABS frame and metal mesh help shield the speaker face.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe SX690NEO-1 combines a water-repellent pressed-paper cone with Tetolon high-frequency domes and neodymium magnets. Its woofer has a 38 mm voice coil, while the tweeter and super tweeter use 25 mm and 20 mm voice coils respectively. The provided MPG 690 grille uses a high-resistance ABS structure with a metallic finish and protective metal mesh.\u003c\/p\u003e\u003cp\u003eConfirm available mounting clearance before installation using the published 237.5 x 225 mm outer dimensions and 93 mm overall depth. Use the speakers with a stable 4-ohm-capable amplifier and observe the amplifier's minimum impedance when daisy-chaining speakers. For Hertz's SPL-oriented setup guidance, apply a 60 Hz high-pass filter with a 12 dB-per-octave slope.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":45771451007167,"sku":"SX690NEO-1","price":283.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71b3LTIcbGL.jpg?v=1782362702"},{"product_id":"hertz-cx690","title":"Hertz CX690 6x9\" Three-Way Coaxial Speakers","description":"\u003cp\u003eThe Hertz CX690 is a pair of 6x9-inch three-way coaxial car speakers designed for factory-location upgrades and custom horizontal installations. Its integrated woofer, dome tweeter, and dome supertweeter consolidate full-range reproduction into each speaker assembly. This makes it a practical option for vehicles that use elliptical 6x9-inch speaker locations.\u003c\/p\u003e\u003cp\u003eWith 100 watts continuous power handling and a 4-ohm impedance, the CX690 can be used with an appropriate aftermarket amplifier or a compatible car stereo. Its 93.5 dB sensitivity supports strong output from available power. The specified 40 Hz to 23 kHz frequency response covers bass, midrange, and high-frequency content within a single coaxial design.\u003c\/p\u003e\u003cp\u003eThe 6x9-inch woofer uses Hertz SPP-M semi-pressed paper reinforced with mica powder. This cone material is engineered to balance low moving mass with damping characteristics. A wide rubber surround supports woofer excursion while helping control unwanted resonance.\u003c\/p\u003e\u003cp\u003eFor upper-frequency reproduction, the CX690 combines a 40 mm dome tweeter with a 20 mm dome supertweeter. The tweeter faceplate geometry is optimized for off-axis listening, an important consideration in many rear-deck and door installations. This three-way arrangement is intended to maintain high-frequency presence when the speakers are installed horizontally.\u003c\/p\u003e\u003cp\u003eA high-density ferrite woofer motor, low-carbon steel polar plates, and a rubber-covered metallic-finish basket support the speaker's mechanical design. The included grilles add protection where the installation permits their use. The CX690 can serve as a direct 6x9-inch replacement or as part of a broader Hertz Cento speaker-system upgrade.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Coaxial Layout:\u003c\/strong\u003e Integrates woofer, tweeter, and supertweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPP-M Woofer Cone:\u003c\/strong\u003e Paper-mica cone balances lightness and damping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Continuous Handling:\u003c\/strong\u003e Supports use with suitable aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40 mm Dome Tweeter:\u003c\/strong\u003e Handles mid-high frequencies within the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 mm Dome Supertweeter:\u003c\/strong\u003e Extends high-frequency output for horizontal mounting positions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective Grilles Included:\u003c\/strong\u003e ABS and metal-mesh grilles help protect the speakers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CX690 uses a semi-pressed paper-mica woofer cone, wide rubber suspension, high-density ferrite woofer magnet, and neodymium tweeter magnet. Its metallic-finish basket is paired with a rubber magnet cover intended to damp spurious vibration. The supplied grille uses a high-resistance ABS support with protective metal mesh.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's available 6x9-inch opening, mounting depth, clearance behind the mounting surface, and grille clearance before installation. The speaker has a listed mounting depth of 78.5 mm (3.09 inches), so adapters or spacers may be needed in some vehicles. Connect each speaker to a 4-ohm-compatible amplifier or head-unit channel and use clean, properly set power within its rated handling limits.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":45771451039935,"sku":"CX690","price":182.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/716wZc4umRL.jpg?v=1782362704"},{"product_id":"hertz-mpx690-3","title":"Hertz MPX690-3 6x9\" Three-Way Coaxial Speakers","description":"\u003cp\u003eThe Hertz Mille Pro MPX 690.3 is a pair of 6x9-inch three-way coaxial car speakers designed for full-range rear-deck applications. It combines a woofer, a dedicated tweeter, and a supertweeter in each speaker to provide broad frequency coverage from a single mounting location. This makes it a practical upgrade for vehicles with factory 6x9 speaker positions where stronger output and more high-frequency extension are desired.\u003c\/p\u003e\u003cp\u003eRated at 130 watts continuous power handling and 260 watts peak per speaker, the MPX 690.3 is intended for systems that can support a substantial 4-ohm speaker load. Its 94 dB SPL sensitivity helps it produce useful output with compatible aftermarket amplification or a capable head unit. The integrated crossover separates the driver ranges at specified frequencies, so no separate external passive crossover is required for normal use.\u003c\/p\u003e\u003cp\u003eThe woofer uses a pressed-pulp cone reinforced with cotton fibers, paired with a large rubber surround for controlled excursion. A 38 mm pure-copper voice coil on a Polyamide former is designed to manage sustained power while supporting dynamic playback. The high-density flux ferrite woofer motor and low-carbon iron plates are part of the speaker's high-power design.\u003c\/p\u003e\u003cp\u003eFor upper frequencies, the MPX 690.3 uses a 35 mm Tetolon-dome tweeter with a neodymium magnet and a 29 mm Tetolon-dome supertweeter. The tweeter faceplate geometry is engineered to support off-axis response, an important consideration for horizontal rear-deck mounting. Together, the two high-frequency drivers extend the rated response to 24 kHz.\u003c\/p\u003e\u003cp\u003eAn aluminum-alloy basket, radial venting, and an anti-vibration rubber magnet cover support the speaker's mechanical design. The package includes protective metal-mesh grilles for installations where the speakers are exposed. Match the speakers to a vehicle with suitable 6x9 mounting space and verify depth, opening, and grille clearance before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Coaxial Layout:\u003c\/strong\u003e Combines woofer, tweeter, and supertweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e130W Continuous Handling:\u003c\/strong\u003e Supports higher-powered compatible car audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed-Pulp Woofer Cone:\u003c\/strong\u003e Cotton fibers balance stiffness and low moving mass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon High-Frequency Drivers:\u003c\/strong\u003e Tweeter and supertweeter extend upper-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover:\u003c\/strong\u003e Divides driver ranges without a separate crossover box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Metal-Mesh Grilles:\u003c\/strong\u003e Provides protection for exposed speaker installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MPX 690.3 uses a pressed-pulp-and-cotton-fiber cone, large rubber surround, high-density flux ferrite woofer magnet, neodymium tweeter magnet, and aluminum-alloy basket. Its 38 mm woofer voice coil is pure copper wound on a Polyamide former, while the tweeter and supertweeter use Tetolon domes. Radial basket venting and a rubber magnet cover are incorporated to manage operating heat and unwanted vibration.\u003c\/p\u003e\u003cp\u003eThese speakers are optimized for rear-deck mounting and require a compatible 6x9 opening with sufficient depth and clearance. Confirm the 241 mm by 223 mm outer dimensions, 90 mm mounting depth dimension, and the vehicle's mounting-hole pattern before ordering. Wire each speaker with correct polarity to a 4-ohm-compatible source or amplifier, and avoid exceeding the 130-watt continuous power rating per speaker.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":45771453268159,"sku":"MPX690-3","price":311.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71HxVMOJ-UL.jpg?v=1782362771"},{"product_id":"hertz-x690","title":"Hertz X 690 6x9\" 4-Way Coaxial Speakers","description":"\u003cp\u003eThe Hertz X 690 is a pair of 6x9-inch four-way coaxial car speakers designed for vehicles with compatible factory 6x9 speaker locations. It provides an all-in-one replacement solution by combining woofer, tweeter, and super-tweeter elements in each speaker. This makes it a practical option for upgrading worn factory speakers while retaining a conventional coaxial installation format.\u003c\/p\u003e\u003cp\u003eWith 85 watts continuous power handling, 340 watts peak power handling, and a 4-ohm impedance, the X 690 is suited to systems using a compatible aftermarket head unit or amplifier. Its 94 dB SPL sensitivity supports useful output from modest available power. The rated 45 Hz to 22 kHz frequency response covers bass, midrange, and upper-frequency reproduction within one speaker assembly.\u003c\/p\u003e\u003cp\u003eThe four-way design uses a 40 mm PEI tweeter and two 15 mm piezoelectric super-tweeters above the 6x9 woofer. This arrangement is intended to extend high-frequency output beyond 20 kHz while keeping the additional drivers integrated into the coaxial speaker. The tweeter and super-tweeter faceplate is designed for off-axis listening positions common in vehicle interiors.\u003c\/p\u003e\u003cp\u003eFor low- and mid-frequency output, Hertz uses a water-repellent pressed-paper cone with a foam surround. The woofer employs a 25 mm pure-copper voice coil and a high-density-flux ferrite magnet. These materials are paired with a stated mechanical excursion of ±4.3 mm.\u003c\/p\u003e\u003cp\u003eThe X 690 can be used as a direct-format upgrade in compatible 6x9 door, rear-deck, or other OEM speaker locations. Its DIN-size basket is finished with abrasion-resistant dust paint, and Hertz lists grilles as included. Before installation, compare the vehicle opening and available depth with the published physical dimensions and allow clearance for the speaker's integrated driver assembly.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Way Coaxial Layout:\u003c\/strong\u003e Integrates woofer, tweeter, and dual super-tweeters into each 6x9 speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e85W Continuous Handling:\u003c\/strong\u003e Supports matching with compatible aftermarket source units or amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Piezoelectric Super-Tweeters:\u003c\/strong\u003e Extends the rated response above 20 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Uses treated pressed paper for the woofer cone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFerrite Motor Systems:\u003c\/strong\u003e Uses a high-density-flux woofer magnet and ferrite tweeter magnet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Grilles:\u003c\/strong\u003e Adds protection when the installation location requires exposed speakers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe X 690 uses a metallic-grey, high-stiffness pressed-paper cone with water-repellent treatment and a foam surround. Its woofer has a 25 mm pure-copper voice coil, while the 40 mm PEI tweeter uses a ferrite motor. The basket is DIN-size and protected by abrasion-resistant dust paint.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts 6x9-inch speakers and check the manufacturer's A through I physical measurements before purchase. Use vehicle-appropriate mounting adapters, hardware, and wiring connections where required by the vehicle. For power matching, use a compatible 4-ohm channel and avoid exceeding the speaker's 85-watt continuous power rating.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":45771453333695,"sku":"X690","price":53.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71Uru0H9XwL.jpg?v=1782362776"},{"product_id":"audison-apk690","title":"Audison APK690 6x9\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Audison APK690 is a Prima Series 2-way component speaker system designed for vehicles with factory 6 x 9-inch door speaker locations. It combines AP 690 elliptical woofers, AP 1 tweeters, and dedicated APCX TW 690 passive crossovers. This configuration provides a practical upgrade path for vehicles that need separate high-frequency placement rather than a coaxial speaker.\u003c\/p\u003e\u003cp\u003eRated for 100 watts continuous and 300 watts peak power handling, the APK690 presents a 4-ohm load to the audio system. Its specified system frequency response is 40 Hz to 20 kHz, covering bass and midrange output from the wofer section along with high-frequency extension from the separate tweeters. The woofer sensitivity is rated at 95 dB SPL.\u003c\/p\u003e\u003cp\u003eThe AP 690 woofer uses a 25 mm pure-copper voice coil and a water-repellent treated paper cone. Its cone profile was developed with FEM simulation and optimized with Klippel R\u0026amp;D Scan Vibrometer measurements. A Triple Wave surround is used to support linear cone excursion, while the compact basket is intended to help with OEM-style door installations.\u003c\/p\u003e\u003cp\u003eThe AP 1 tweeter has a 26 mm diaphragm with a wide-roll surround and an acoustic lens. Audison specifies the lens to help compensate for in-car response effects in the 10 kHz to 13 kHz range associated with challenging OEM mounting locations. The separate tweeter arrangement gives installers flexibility to retain or improve factory high-frequency speaker positions.\u003c\/p\u003e\u003cp\u003eEach system uses an APCX TW 690 crossover, which applies a 6 dB-per-octave high-pass filter at 3.3 kHz for the tweeter. The compact crossover includes a 0 dB or +3 dB tweeter-level setting for adjustment after installation. The APK690 can be used as part of a factory-radio upgrade or paired with a compatible 4-ohm aftermarket amplifier.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 x 9-Inch Component System:\u003c\/strong\u003e Separate woofers and tweeters support flexible vehicle-specific placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Continuous Handling:\u003c\/strong\u003e Supports systems rated up to 100 watts continuous power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated Passive Crossovers:\u003c\/strong\u003e APCX TW 690 networks manage tweeter filtering and level adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Tweeter Output:\u003c\/strong\u003e Choose 0 dB or +3 dB tweeter attenuation settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Treated woofer cone is designed for door-speaker environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePure Copper Woofer Coil:\u003c\/strong\u003e 25 mm voice coil supports power handling and cone control.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 690 woofer uses a compact, abrasion-resistant and scratch-resistant coated basket, with the motor secured using damping epoxy adhesive. Its 90 x 32 x 15 mm woofer magnet and 25 mm voice coil are paired with a treated paper cone and Triple Wave surround. The AP 1 tweeter uses a 26 mm diaphragm, while the compact APCX TW 690 crossover measures 46.5 x 37.5 x 20.1 mm.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 6 x 9-inch elliptical woofer and has adequate mounting clearance before purchase. Install the AP 1 tweeters and AP 690 woofers through the supplied APCX TW 690 crossovers; the crossover's fast-on connectors are intended to simplify correct connections. Match the system to a compatible 4-ohm amplifier or speaker channel, and use the 0 dB or +3 dB tweeter setting to suit the final mounting location.\u003c\/p\u003e","brand":"AUDISON","offers":[{"title":"Default Title","offer_id":45771454316735,"sku":"APK690","price":259.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71-VOSfKKVL.jpg?v=1782363020"},{"product_id":"hifonics-zs693","title":"Hifonics ZS693 6 x 9-Inch 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Hifonics ZS693 is a pair of 6 x 9-inch, 3-way coaxial car speakers designed to replace compatible factory speakers with a full-range upgrade. Each speaker combines a woofer, midrange, and tweeter in one assembly, helping simplify installation where a 6 x 9-inch coaxial speaker fits. They are suited to drivers who want an economical replacement or system refresh without moving to separate component speakers.\u003c\/p\u003e\u003cp\u003eThe ZS693 uses a 4-ohm design and is rated for 60 watts RMS per speaker, or 120 watts RMS for the pair. Its 46 Hz to 20 kHz frequency response and 88 dB sensitivity support broad full-range playback from a compatible factory head unit or external amplifier. For amplifier matching, prioritize the continuous RMS rating rather than the higher peak-power figure.\u003c\/p\u003e\u003cp\u003eA 1-inch Neo-Mylar soft-dome tweeter handles upper-frequency detail, while the Alpha-Cellulose woofer cone is designed for low weight and rigidity. The 3-way coaxial layout places the high-frequency drivers at the center of the woofer, providing a compact all-in-one speaker arrangement. A passive Butterworth crossover manages the transition between the speaker elements.\u003c\/p\u003e\u003cp\u003eHifonics builds the ZS693 with a pure-copper voice coil on a lightweight Kapton former, an epoxy-infused natural-fiber spider, and an Overcoil cooling system. These parts are intended to support reliable movement and heat management during normal operation. The speaker also uses a ferrite magnet motor and an anti-resonant stamped-steel basket.\u003c\/p\u003e\u003cp\u003eThis pair can be used in compatible front-door, rear-deck, or rear-panel locations, depending on the vehicle's factory speaker position and available clearance. Confirm the 8.64 x 5.98-inch cutout requirement and 3.35-inch mounting depth before purchase. It is a practical fit for a factory-speaker replacement project or as part of a modest amplified car-audio upgrade.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer, midrange, and tweeter elements into each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 x 9-Inch Size:\u003c\/strong\u003e Fits vehicles designed for compatible oval 6 x 9-inch speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Per Speaker:\u003c\/strong\u003e Supports sensible matching with compatible head units or amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeo-Mylar Dome Tweeter:\u003c\/strong\u003e Provides dedicated high-frequency reproduction in a compact layout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlpha-Cellulose Cone:\u003c\/strong\u003e Combines low weight with a rigid woofer-cone structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOvercoil Cooling:\u003c\/strong\u003e Moves air over the voice coil through the spider.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ZS693 uses an anti-resonant stamped-steel basket, ferrite magnet, rubber surround, and epoxy-infused natural-fiber spider. Its pure-copper voice coil is fitted to a Kapton former for lightweight heat dissipation. Spade terminals allow connection with compatible spade connectors or direct soldering.\u003c\/p\u003e\u003cp\u003eMeasure the factory opening, outside clearance, and mounting depth before installation; the listed cutout is 8.64 x 5.98 inches and mounting depth is 3.35 inches. Connect positive and negative speaker leads to the correct terminals, secure the speaker firmly, and keep wiring protected from metal edges and moving window mechanisms. The manufacturer recommends considering professional installation when interior-panel removal or custom mounting is required.\u003c\/p\u003e","brand":"HIFONICS","offers":[{"title":"Default Title","offer_id":45776292806847,"sku":"ZS693","price":25.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71DJ95qxE2L.jpg?v=1782490321"},{"product_id":"mb-quart-xk2-169","title":"MB Quart XK2-169 6x9\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe MB Quart XK2-169 is a pair of 6x9-inch, 2-way coaxial car speakers intended for upgrading compatible factory or aftermarket vehicle speaker locations. It combines the woofer and high-frequency drivers into each speaker assembly, providing a space-efficient full-range replacement option. The published 150-watt RMS and 300-watt peak power ratings apply per pair.\u003c\/p\u003e\u003cp\u003eThese speakers are suited to listeners who want to replace worn factory 6x9-inch speakers or build a straightforward aftermarket system around a compatible head unit or external amplifier. Their 88 dB sensitivity and published 55 Hz-22 kHz frequency response describe their operating range and efficiency rating. Vehicle fitment should always be confirmed against the available mounting opening and depth before purchase.\u003c\/p\u003e\u003cp\u003eThe XK2-169 is specified as a 2-way coaxial system, placing multiple drivers within the same 6x9-inch speaker footprint. This format can simplify an upgrade where separate tweeter locations or external crossover mounting are not desired. It is designed for use in automotive audio applications.\u003c\/p\u003e\u003cp\u003ePublished crossover information lists 12 dB slopes at 1 kHz and 3 kHz. This crossover design is intended to divide frequency reproduction among the drivers in the coaxial assembly. Pairing the speakers with properly matched amplification and clean source signal is important for practical system setup.\u003c\/p\u003e\u003cp\u003eFor installation planning, the published cutout requirement is 8.64 by 5.98 inches, with a mounting depth of 3.35 inches measured from the flange. These measurements are useful starting points, but door panels, rear decks, grilles, adapters, and window mechanisms can vary by vehicle. Confirm clearance, mounting-hole alignment, and wiring polarity before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Coaxial Format:\u003c\/strong\u003e Fits compatible 6x9-inch automotive speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Speaker System:\u003c\/strong\u003e Integrates low- and high-frequency drivers in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W RMS Per Pair:\u003c\/strong\u003e Supports systems matched to its published continuous rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W Peak Per Pair:\u003c\/strong\u003e Provides the published short-duration peak handling figure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e55 Hz-22 kHz Response:\u003c\/strong\u003e Covers a published range from bass through treble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 dB Crossover Slopes:\u003c\/strong\u003e Published at 1 kHz and 3 kHz.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe XK2-169 uses a coaxial speaker layout in a nominal 6x9-inch frame. MB Quart describes the speakers as constructed with high-quality materials, though specific cone, surround, voice-coil, and magnet materials are not publicly confirmed for this exact model. The integrated-driver design is intended to keep the installation concentrated in a single speaker opening.\u003c\/p\u003e\u003cp\u003eCheck that the vehicle supports a 6x9-inch replacement speaker and verify the published 8.64 by 5.98 inch cutout and 3.35 inch flange-depth requirement against the actual location. Use appropriate vehicle-specific brackets, wiring adapters, and fasteners where required; these items are not confirmed as included. Match the source or amplifier output appropriately to the speaker system and observe correct positive and negative terminal polarity during wiring.\u003c\/p\u003e","brand":"MB QUART","offers":[{"title":"Default Title","offer_id":45776334880959,"sku":"XK2-169","price":36.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71N12pJBq3L.jpg?v=1782490770"}],"url":"https:\/\/nsidistributor.com\/collections\/6x9-inch-speakers.oembed?page=2","provider":"NSI Audio Distributing","version":"1.0","type":"link"}