{"title":"6.5 Inch Speakers","description":null,"products":[{"product_id":"gravity-wzp65-warzone-series-6-5-inch-pro-midrange-coaxial-loud-speaker-4-ohms-with-600-watt-max-1-speaker-corrugated-speaker-surround-with-oversize-magnet-motor-structure","title":"WARZONE WZP65 6.5\" Pro Midrange Coaxial Speaker","description":"\u003cp\u003eThe WARZONE WZP65 is a 6.5-inch pro midrange coaxial loudspeaker intended for car-audio systems that need dedicated vocal and instrument-range output. Its 4-ohm nominal impedance supports use with compatible aftermarket amplification. The speaker is sold as a single unit for custom installations, replacement applications, or multi-speaker builds.\u003c\/p\u003e\u003cp\u003eThis model is rated for up to 600 watts maximum power and has a listed frequency response of 90 Hz to 22 kHz. That range places its focus on midrange presence while extending into upper-frequency detail through its coaxial design. A listed 95 dB sensitivity can help it produce useful output with appropriately matched amplifier power.\u003c\/p\u003e\u003cp\u003eThe WZP65 uses a 1.5-inch voice coil and a 20-ounce magnet. Its oversized magnet motor structure is intended to support the driver during higher-output use. A corrugated surround is also part of the speaker design.\u003c\/p\u003e\u003cp\u003eFor listeners building a high-output system, the WZP65 can be used for front-stage, door-panel, kick-panel, or custom-panel midrange duty where physical fitment allows. Its 6.5-inch format is common in aftermarket car-audio locations, but actual vehicle fitment should always be measured. Because its listed low-frequency limit is 90 Hz, pairing it with a subwoofer can help cover deeper bass frequencies.\u003c\/p\u003e\u003cp\u003eThe WZP65 is a passive speaker, so it needs a compatible amplified audio signal and proper speaker wiring. Match the amplifier to the speaker's 4-ohm load and set crossover points thoughtfully for the application. Confirm available mounting depth and cutout space before beginning an installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Design:\u003c\/strong\u003e Combines midrange and high-frequency reproduction in one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600W Maximum Power:\u003c\/strong\u003e Supports use in appropriately configured higher-output audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Nominal Impedance:\u003c\/strong\u003e Works with amplifiers designed for a 4-ohm speaker load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90 Hz–22 kHz Response:\u003c\/strong\u003e Covers midrange content and extends into upper frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20-Ounce Magnet:\u003c\/strong\u003e Provides the magnetic motor structure specified for this driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrugated Surround:\u003c\/strong\u003e Forms part of the driver suspension and speaker construction.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZP65 is built around a paper cone, corrugated surround, 1.5-inch voice coil, and oversized magnet motor structure. Its coaxial layout places the high-frequency driver within the main 6.5-inch speaker assembly. The listed mounting style is flush mount, with a nominal basket diameter of 7.13 inches.\u003c\/p\u003e\u003cp\u003eVerify a mounting depth of at least 3.58 inches and a cutout near the listed 5.71-inch diameter before installation. Use secure mounting hardware and correctly polarized speaker wiring, then pair the speaker with a compatible 4-ohm amplifier channel. For a fuller system, use suitable crossover settings and add a subwoofer for frequencies below the WZP65's stated response range.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":43915363778751,"sku":"704129655669","price":39.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/91BKy8c-jCL.jpg?v=1734558113"},{"product_id":"gravity-1x-wz6g-warzone-series-6-5-inch-500-watts-maximum-power-handling-mid-range-coaxial-car-audio-loud-speaker-4-ohms-impedance-with-92db-sensitivity","title":"WARZONE WZ6G 6.5\" Pro Midrange Car Speaker","description":"\u003cp\u003eThe WARZONE WZ6G is a 6.5-inch pro midrange car speaker designed to replace or supplement factory speakers in an amplified vehicle-audio system. It focuses on the vocal and instrument range, helping bring more presence and definition to music than many basic factory speaker setups. Its 4-ohm impedance supports use with compatible car-audio amplification.\u003c\/p\u003e\u003cp\u003eThis speaker is intended for listeners building a louder, more direct midrange presentation in doors, kick panels, custom speaker pods, or similar vehicle locations. With a published 60 Hz to 8 kHz frequency response, it covers a broad portion of the midrange spectrum. It is a practical option for systems that use separate tweeters or subwoofers to cover frequencies outside its operating range.\u003c\/p\u003e\u003cp\u003eThe WZ6G is rated for 500 watts maximum peak power per speaker and uses a 30-ounce magnet. Its 92 dB sensitivity specification can help it produce useful output with appropriate amplifier power. As with any speaker upgrade, clean power and correct filtering are important for dependable performance.\u003c\/p\u003e\u003cp\u003eA corrugated speaker surround and oversized magnet motor structure are part of the WZ6G design. These construction details support the driver’s intended high-output midrange role while retaining a conventional 6.5-inch installation format. The published mounting measurements make it easier to compare the speaker against available space before installation.\u003c\/p\u003e\u003cp\u003eThe WZ6G works well as part of a component-style car-audio upgrade rather than as a complete full-range system on its own. Pair it with a suitable 4-ohm amplifier channel, proper crossover settings, and complementary tweeters or bass reinforcement as needed for the desired system balance. One WZ6G speaker is listed in the package contents.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Midrange Driver:\u003c\/strong\u003e Fits many common custom and replacement speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W Maximum Peak Handling:\u003c\/strong\u003e Supports use in amplified car-audio applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches many conventional car-audio amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92 dB Sensitivity:\u003c\/strong\u003e Helps support efficient output with compatible power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60 Hz–8 kHz Response:\u003c\/strong\u003e Covers a broad midrange frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-Ounce Magnet:\u003c\/strong\u003e Uses a substantial magnet motor structure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ6G uses a corrugated speaker surround and an oversized magnet motor structure. Its nominal basket diameter is 7.13 inches, while the listed mounting diameter is 5.71 inches. This design is intended for a pro-style midrange role in a vehicle-audio installation.\u003c\/p\u003e\u003cp\u003eConfirm that the mounting location provides at least 3.58 inches of depth and accepts the 5.71-inch mounting diameter before cutting or modifying panels. Wire the speaker to a compatible 4-ohm amplifier channel and use appropriate crossover settings for a midrange driver. The package listing identifies one WZ6G speaker; mounting hardware and other accessories are not documented.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":43915381866687,"sku":"0637740963861","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71InnucmarL.jpg?v=1735599519"},{"product_id":"warzone-wz65ps-6-5-inch-mid-range-driver-speaker-1000w-max-4-ohms-20oz-magnet-aluminum-dome-tweeter-and-steel-basket-for-car-audio-2-speakers","title":"Warzone WZ65PS 6.5\" Mid-Range Speakers with Dome Tweeters","description":"\u003cp\u003eThe Warzone WZ65PS is a 6.5-inch car-audio speaker set designed to add strong midrange output and extended high-frequency detail to an upgraded vehicle sound system. Each set combines a mid-range driver with a dome tweeter, helping cover the vocal, instrument, and upper-frequency range that factory speakers may reproduce less clearly. It is intended for car-audio enthusiasts replacing worn speakers or building a more dedicated amplified system.\u003c\/p\u003e\u003cp\u003eWith a stated 4-ohm impedance, the WZ65PS is suited to common car-audio amplifier configurations. Its published power handling is 320 watts rated and 1000 watts maximum, so amplifier matching should be based on the rated-power specification rather than the peak figure. The stated 90 dB sensitivity supports efficient output when installed and tuned appropriately.\u003c\/p\u003e\u003cp\u003eThe speaker uses a black foaming paper cone with a cloth edge to reproduce the midrange portion of the music spectrum. Its stated frequency response is 100 Hz to 20 kHz, covering midbass through treble rather than the lowest sub-bass frequencies. For full-range systems, it can be paired with a subwoofer and suitable crossover settings for lower bass duties.\u003c\/p\u003e\u003cp\u003eA 20-ounce strontium magnet and 1.5-inch voice coil support the mid-range driver's motor and thermal structure. The integrated 50 mm aluminum dome tweeter uses a neodymium magnet and is intended to add high-frequency definition. Together, these elements create a speaker format aimed at systems that need both vocal presence and treble coverage from a 6.5-inch mounting location.\u003c\/p\u003e\u003cp\u003eThe WZ65PS has a red steel basket intended to provide a rigid mounting structure in a car-audio installation. It is sold as a two-speaker set, making it suitable for a left\/right front-stage or rear-fill upgrade where vehicle fitment permits. Confirm available mounting depth, mounting-hole pattern, wiring, amplifier output, and crossover strategy before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Speaker Format:\u003c\/strong\u003e Fits applications designed for 6.5-inch car-audio speakers, subject to vehicle-specific fitment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e320W Rated Power:\u003c\/strong\u003e Provides a meaningful rating for matching an external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with many conventional car-audio amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 Hz-20 kHz Response:\u003c\/strong\u003e Covers midrange and treble frequencies for system upgrades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Dome Tweeter:\u003c\/strong\u003e Adds dedicated high-frequency reproduction to the speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel Basket Construction:\u003c\/strong\u003e Supplies a durable mounting frame for vehicle installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ65PS combines a red steel basket, black foaming paper cone, cloth edge, 20-ounce strontium magnet, and a 1.5-inch voice coil. A 50 mm aluminum dome tweeter with a neodymium magnet is incorporated for high-frequency output. These materials and components are specified for a durable car-audio speaker assembly with separate midrange and treble elements.\u003c\/p\u003e\u003cp\u003eUse the WZ65PS only where a 6.5-inch speaker can be securely mounted and where clearance is confirmed before cutting or drilling. Match the speakers to an amplifier compatible with a 4-ohm load, and use appropriate filtering to protect them from bass below their stated response range. The package is listed as containing two speakers; vehicle-specific mounting adapters, wiring, grilles, amplifiers, and crossovers should be confirmed separately before purchase.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":44329022324927,"sku":"B0DT7T2DP2","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81eTeciP0rL.jpg?v=1749682715"},{"product_id":"warzone-wz652mtg-6-5-inch-marine-box-speaker-with-rgb-led-lighting-700w-max-4-ohms-gray-injection-cone-with-rubber-edge-and-neodymium-magnet-2-speakers","title":"Warzone WZ652MTG 6.5\" Marine Box Speakers with RGB","description":"\u003cp\u003eThe Warzone WZ652MTG is a pair of 6.5-inch marine box speakers designed for audio systems used around boats, patios, RVs, and other outdoor-oriented installations. Each set combines full-range speaker playback with integrated RGB LED illumination for systems where sound and visual presentation both matter. The speakers use a 4-ohm design for compatibility with appropriately matched car or marine audio amplification.\u003c\/p\u003e\u003cp\u003eWith a listed 700-watt maximum power rating and 300-watt rated power rating, the WZ652MTG is intended for systems that need substantial output from compact 6.5-inch speakers. Its published 50 Hz to 20 kHz frequency response covers bass, midrange, and high-frequency program material within the stated range. An 88 dB sensitivity rating provides a useful reference when matching the speakers with an amplifier.\u003c\/p\u003e\u003cp\u003eThe gray polypropylene injection cone and rubber edge are selected for an outdoor and marine-style speaker design. A black plastic basket supports the driver assembly, while the gray cone finish gives the pair a coordinated appearance for visible installations. These details make the WZ652MTG suitable for applications where conventional interior car-speaker styling is not the goal.\u003c\/p\u003e\u003cp\u003eA 38 mm dome tweeter handles high-frequency reproduction, complementing the 6.5-inch main driver. The listed 1-inch voice coil and 12-ounce strontium magnet are part of the speaker motor and driver construction. Together, these components define the published acoustic configuration without requiring a separate tweeter installation.\u003c\/p\u003e\u003cp\u003eRGB LED lighting adds an accent feature for marine, powersports, and outdoor entertainment systems. The WZ652MTG is supplied as two speakers, making it a practical starting point for a stereo pair or a matching expansion within a larger system. Pair it with a compatible 4-ohm-capable amplifier and plan the speaker and lighting wiring before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Marine Box Format:\u003c\/strong\u003e Compact speaker size for marine and outdoor-oriented audio installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB LED Lighting:\u003c\/strong\u003e Adds illuminated color accents to a visible speaker installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Supports matching with compatible car or marine amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e38 mm Dome Tweeter:\u003c\/strong\u003e Provides dedicated high-frequency reproduction within each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Gray injection cone is paired with a rubber edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair Included:\u003c\/strong\u003e Package contains two matching WZ652MTG speakers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ652MTG uses a gray polypropylene injection cone, rubber edge, black plastic basket, 1-inch voice coil, and 12-ounce strontium magnet. Its visible gray finish and integrated RGB lighting suit installations where the speakers are intended to be seen as part of the system. The speaker is specified as a marine box model, though no IP rating or water-ingress rating is confirmed.\u003c\/p\u003e\u003cp\u003eUse the speakers with amplification that is stable at 4 ohms and power-match from the amplifier's rated output rather than its peak figure. Confirm available mounting space, mounting hardware, wiring routes, and the required RGB-lighting connections before cutting or drilling, because mounting dimensions and lighting-control details are not confirmed. The pair can be used as a left\/right stereo set or added to a compatible multi-speaker outdoor audio system.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":44329025175743,"sku":"B0DTBRW328","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81YKfPE7JpL.jpg?v=1749683521"},{"product_id":"warzone-wz652mtk-6-5-inch-marine-box-speaker-with-rgb-led-lighting-700w-max-4-ohms-black-injection-cone-with-rubber-edge-and-neodymium-magnet-2-speakers","title":"Warzone WZ652MTK 6.5\" Marine Box Speakers with RGB","description":"\u003cp\u003eThe Warzone WZ652MTK is a pair of 6.5-inch marine box speakers designed for boat, RV, and outdoor audio installations. Each pair combines full-range speaker playback with integrated RGB LED lighting for systems that need both sound and visual accent lighting. They are intended for shoppers upgrading an existing marine or outdoor sound system with a compact speaker pair.\u003c\/p\u003e\u003cp\u003eThe WZ652MTK is rated for up to 700 watts maximum power and 300 watts rated power. Its 4-ohm nominal impedance is suited to compatible marine, powersports, or car-audio amplification. With a listed 50Hz-20kHz frequency response and 88dB sensitivity, it is designed to cover bass, midrange, and high-frequency content in a single speaker assembly.\u003c\/p\u003e\u003cp\u003eA 38mm dome tweeter is integrated to handle high-frequency detail, while the 6.5-inch driver uses a 1-inch voice coil. The speaker is also listed with a 12-ounce strontium magnet. These components support a two-way-style listening experience from each enclosed speaker.\u003c\/p\u003e\u003cp\u003eIntegrated multi-color RGB LED lighting adds a visual element to the installation. An external RGB controller is required for lighting control and is not included. This makes the speakers a practical fit for systems already using compatible RGB lighting control hardware.\u003c\/p\u003e\u003cp\u003eThe WZ652MTK uses a black plastic basket, polypropylene injection cone, and rubber edge construction described for marine and outdoor use. The pair can be used as part of a larger audio upgrade alongside a compatible source unit, amplifier, speaker wiring, and RGB controller. Confirm available mounting space, amplifier compatibility, and lighting-control requirements before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Marine Box Format:\u003c\/strong\u003e Compact speaker pair for marine and outdoor audio installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e700W Maximum Power:\u003c\/strong\u003e Handles up to 700 watts maximum power per the listing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Designed for use with compatible audio amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated RGB LEDs:\u003c\/strong\u003e Adds multi-color lighting to the speaker installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e38mm Dome Tweeter:\u003c\/strong\u003e Provides dedicated high-frequency reproduction within each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber-Edge Cone Assembly:\u003c\/strong\u003e Uses a polypropylene injection cone with a rubber edge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ652MTK combines a black plastic basket with a polypropylene injection cone and rubber edge. Its listed 12-ounce strontium magnet, 1-inch voice coil, and 38mm dome tweeter are housed in a marine box speaker design. The package is listed as containing two speakers.\u003c\/p\u003e\u003cp\u003eUse these speakers with a compatible 4-ohm audio system and match the amplifier setup to the product's stated power ratings. RGB lighting requires an external controller, which is not included, so plan for compatible lighting-control hardware separately. Check mounting location clearance and complete speaker and lighting wiring before final mounting.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":44329025503423,"sku":"B0DTBZD2SM","price":169.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81vIeZw6_CL.jpg?v=1749683632"},{"product_id":"warzone-wz652mtw-6-5-inch-marine-box-speaker-with-rgb-led-lighting-700w-max-4-ohms-white-injection-cone-with-rubber-edge-and-neodymium-magnet-2-speakers","title":"Warzone WZ652MTW 6.5\" Marine Box Speakers with RGB LEDs","description":"\u003cp\u003eThe Warzone WZ652MTW is a pair of 6.5-inch marine box speakers designed to add full-range audio to boat, RV, patio, and outdoor sound systems. Its enclosed-box format provides a surface-mount speaker option where conventional in-panel speaker installation may not be practical. RGB LED lighting adds an illuminated visual element to the installation.\u003c\/p\u003e\u003cp\u003eEach set is specified for up to 700 watts maximum power and 300 watts rated power, with a 4-ohm impedance. The speakers cover a stated 50Hz to 20kHz frequency range and have an 88dB sensitivity rating. This combination is intended to reproduce bass, midrange, and treble from a compatible amplified audio system.\u003c\/p\u003e\u003cp\u003eThe WZ652MTW uses a white polypropylene injection cone with a rubber edge. This cone-and-surround arrangement is paired with a black plastic basket for an outdoor-oriented speaker design. The white speaker finish suits marine and exterior installations where a lighter appearance is preferred.\u003c\/p\u003e\u003cp\u003eSound reproduction is supported by a 1-inch voice coil, a 12-ounce strontium magnet, and a 38mm dome tweeter. The dome tweeter is designed to handle high-frequency content while the 6.5-inch driver covers the main listening range. Together, the components make this a two-way-style marine speaker solution with integrated lighting.\u003c\/p\u003e\u003cp\u003eUse the WZ652MTW as a pair for a new marine audio installation or as an upgrade to an existing amplified outdoor system. Its 4-ohm specification should be matched to an amplifier or receiver that supports 4-ohm speakers. Confirm available mounting space, wiring routing, and RGB-lighting connection requirements before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Marine Box Format:\u003c\/strong\u003e Provides a surface-mount speaker option for marine and outdoor installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair of Speakers:\u003c\/strong\u003e Includes two matching white marine box speakers for stereo-system use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e700W Maximum Power:\u003c\/strong\u003e Supports higher-output amplified audio systems within its stated ratings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB LED Lighting:\u003c\/strong\u003e Adds illuminated visual styling to the speaker installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone and Rubber Edge:\u003c\/strong\u003e Combines a white injection cone with a flexible rubber surround.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e38mm Dome Tweeter:\u003c\/strong\u003e Handles high-frequency detail alongside the 6.5-inch main driver.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ652MTW combines a white polypropylene injection cone, rubber edge, black plastic basket, 12-ounce strontium magnet, and 1-inch voice coil. Its marine box configuration places the driver and tweeter in a self-contained speaker housing rather than requiring a conventional door or panel cutout. Integrated RGB LEDs provide a visual feature in addition to the audio hardware.\u003c\/p\u003e\u003cp\u003eInstall the pair in locations that allow secure mounting and safe routing for speaker and lighting connections. Connect each 4-ohm speaker to a compatible amplifier or receiver, observing correct polarity. Verify the mounting surface, available clearance, wiring needs, and RGB-lighting setup details before final installation.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":44329026126015,"sku":"B0DTBRNXW1","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/717ua8YfWRL.jpg?v=1749683730"},{"product_id":"warzone-wz65mg-6-5-inch-2-way-marine-speaker-550w-max-4-ohms-12oz-magnet-gray-injection-cone-with-rubber-edge-for-boats-and-outdoor-audio-pair","title":"WARZONE WZ65MG 6.5\" 2-Way Marine Speakers","description":"\u003cp\u003eThe WARZONE WZ65MG is a pair of 6.5-inch, 2-way marine speakers designed for boat and outdoor audio installations. They offer a weather-conscious alternative to standard car speakers where exposure to moisture and changing conditions is a concern. Their 4-ohm design supports use with compatible marine or outdoor audio amplifiers.\u003c\/p\u003e\u003cp\u003eThis speaker set is intended for boat owners and outdoor-audio users looking to replace or add full-range speakers in a 6.5-inch location. The listed 60Hz-20kHz frequency response is suited to reproducing bass, vocals, and treble across a broad listening range. A stated sensitivity of 88dB provides a useful reference when planning amplifier power and expected output.\u003c\/p\u003e\u003cp\u003eWARZONE lists the WZ65MG with 550W maximum power and 180W rated power. These ratings should be considered alongside the capabilities of the connected amplifier and the installation environment. Proper gain adjustment helps keep the system operating cleanly at higher listening levels.\u003c\/p\u003e\u003cp\u003eThe speaker uses a gray polypropylene injection cone paired with a rubber edge. This material combination is specified for durability while supporting controlled cone movement during playback. A 12-ounce strontium magnet and 1-inch voice coil are part of the speaker motor assembly.\u003c\/p\u003e\u003cp\u003eFor a complete marine or patio system, the WZ65MG can be paired with a compatible 4-ohm amplifier, source unit, and appropriately protected wiring. It is supplied as a pair, allowing installation in two speaker locations. Confirm the vehicle or panel cutout, mounting clearance, and wiring requirements before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch 2-Way Design:\u003c\/strong\u003e Provides a compact full-range speaker option for marine and outdoor installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e550W Maximum Power:\u003c\/strong\u003e Supports higher-output system planning when paired with a suitable amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e180W Rated Power:\u003c\/strong\u003e Gives a continuous-power reference for amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible 4-ohm marine or outdoor audio amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone and Rubber Edge:\u003c\/strong\u003e Combines a gray injection cone with a durable rubber surround.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Resistant Construction:\u003c\/strong\u003e Designed for boat and open-air audio environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ65MG uses a gray polypropylene injection cone with a rubber edge, along with a 12-ounce strontium magnet and 1-inch voice coil. Its water-resistant design is intended for marine and outdoor applications. No IP rating or corrosion-test standard is confirmed in the available product information.\u003c\/p\u003e\u003cp\u003eInstall the pair only in locations that accept 6.5-inch speakers after verifying cutout size and mounting depth, which are not specified by the available listing. Connect each speaker to a compatible 4-ohm amplifier channel and use wiring and connections appropriate for the installation environment. Mounting hardware, grilles, and wiring details should be confirmed with the seller before purchase.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":44329028026559,"sku":"B0DT573PVW","price":57.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71b0rECANtL.jpg?v=1749683866"},{"product_id":"warzone-wz65mk-6-5-inch-2-way-marine-speaker-550w-max-4-ohms-12oz-magnet-black-injection-cone-with-rubber-edge-for-boats-and-outdoor-audio-2-speakers","title":"Warzone WZ65MK 6.5\" 2-Way Marine Speakers","description":"\u003cp\u003eThe Warzone WZ65MK is a pair of 6.5-inch 2-way marine speakers designed for boat and outdoor audio installations. They provide a practical replacement or upgrade option where conventional indoor speakers may not be suitable for open-air use. Their 4-ohm design supports use with compatible marine, car-audio, or outdoor audio systems.\u003c\/p\u003e\u003cp\u003eWith a listed maximum power rating of 550 watts and a rated power figure of 180 watts, the WZ65MK is intended for systems that need substantial output capability. Its stated 60Hz-20kHz frequency response covers bass, midrange, and high-frequency content for full-range playback. An 88dB sensitivity rating is listed for the speaker design.\u003c\/p\u003e\u003cp\u003eThe speaker uses a polypropylene injection cone with a rubber edge. This material combination is intended to support cone durability and controlled movement in outdoor-oriented applications. The black cone presentation gives the pair a clean, understated appearance for marine and recreational installations.\u003c\/p\u003e\u003cp\u003eA 12-ounce strontium magnet and 1-inch, or 25mm, voice coil form the stated motor and voice-coil assembly. These components support the speaker's full-range 2-way design and its published power-handling figures. The WZ65MK is specified with a 4-ohm impedance for compatibility with appropriately rated audio equipment.\u003c\/p\u003e\u003cp\u003eWater-resistant construction makes these speakers suited to boats and other exposed audio locations where moisture can be a consideration. They can be used as part of a new marine system or as replacement speakers in an existing compatible installation. Confirm the available mounting location and the amplifier or receiver's 4-ohm compatibility before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch 2-Way Design:\u003c\/strong\u003e Provides a compact full-range speaker format for marine and outdoor systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e550W Maximum Power:\u003c\/strong\u003e Listed maximum power capability supports higher-output system planning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e180W Rated Power:\u003c\/strong\u003e Provides a published rated-power reference for equipment matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with audio equipment designed to support 4-ohm speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Injection Cone:\u003c\/strong\u003e Uses a durable cone material suited to outdoor-oriented applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Resistant Construction:\u003c\/strong\u003e Helps suit the speakers to marine and open-air installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ65MK uses a black polypropylene injection cone with a rubber edge, paired with a 12-ounce strontium magnet and a 1-inch voice coil. Its water-resistant marine-oriented construction is intended for boat and outdoor audio use. The speakers are supplied as a two-speaker set.\u003c\/p\u003e\u003cp\u003eInstall the pair only in locations that accept 6.5-inch speakers and verify the cutout, mounting depth, and fastener requirements before making modifications, as those dimensions are not confirmed in the available product information. Connect each speaker to compatible 4-ohm-capable equipment and follow the installation guidance supplied with the audio system. These speakers are suited to marine, patio, and other open-air audio applications where water-resistant speaker construction is preferred.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":44329028649151,"sku":"B0DT7TYF74","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71l1CM_8mjL.jpg?v=1749684009"},{"product_id":"warzone-wz65mw-6-5-inch-2-way-marine-speaker-550w-max-4-ohms-12oz-magnet-white-injection-cone-with-rubber-edge-for-boats-and-outdoor-audio-2-speakers","title":"Warzone WZ65MW 6.5\" 2-Way Marine Speakers","description":"\u003cp\u003eThe Warzone WZ65MW is a pair of 6.5-inch, 2-way marine speakers designed for boat and outdoor audio installations. They provide a weather-conscious speaker option for replacing worn factory speakers or adding sound to open-air systems. Their 4-ohm impedance supports use with compatible marine and car-audio amplification.\u003c\/p\u003e\u003cp\u003eRated at 180 watts with a stated 550-watt maximum power figure, the WZ65MW is intended for systems that need clear full-range playback in exposed environments. Its specified 60 Hz to 20 kHz frequency response covers bass, midrange, and high-frequency content. An 88 dB sensitivity rating helps the speakers produce useful output with an appropriately matched amplifier.\u003c\/p\u003e\u003cp\u003eThe speaker uses a polypropylene injection cone with a rubber edge to combine lightweight cone construction with a flexible surround. This material combination is suited to installations where humidity and outdoor exposure are considerations. The visible white-cone presentation also fits many marine interiors and exterior audio layouts.\u003c\/p\u003e\u003cp\u003eA 12-ounce strontium magnet and 1-inch (25 mm) voice coil form the motor assembly specified for this model. The WZ65MW is a 2-way coaxial design, placing its full-range drivers together for a compact installation. This makes it practical where a separate tweeter and crossover installation is not desired.\u003c\/p\u003e\u003cp\u003eSold as a two-speaker set, the WZ65MW can be used as a pair for a boat cockpit, RV, patio, or other outdoor-oriented audio zone. It is a suitable consideration for listeners building a system around compatible 4-ohm speaker channels. For stronger output and cleaner playback at higher volume, match the speakers with amplification that is appropriate for their rated power handling.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch 2-Way Design:\u003c\/strong\u003e Combines full-range drivers in a compact speaker format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e180W Rated Power:\u003c\/strong\u003e Supports systems requiring substantial speaker power handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e550W Maximum Power:\u003c\/strong\u003e Provides the manufacturer-listed peak power capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible car and marine audio amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Uses an injection-molded cone with a rubber edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Resistant Construction:\u003c\/strong\u003e Intended for marine and outdoor-oriented installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ65MW uses a white polypropylene injection cone, rubber surround, 12-ounce strontium magnet, and 1-inch voice coil. Its water-resistant marine-oriented construction is designed for installations exposed to outdoor conditions. The speaker is supplied as a matched pair.\u003c\/p\u003e\u003cp\u003eConfirm the available mounting opening, mounting depth, and clearance behind the mounting surface before installation, as those dimensions were not confirmed in the available product data. Wire each speaker to a compatible 4-ohm channel and use an amplifier or receiver whose output is suitable for the stated 180-watt rated power. These speakers are intended for boats, RVs, and outdoor audio locations where a 6.5-inch coaxial marine speaker is appropriate.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":44329030025407,"sku":"B0DT7MKY6B","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/7162AL_bcHL.jpg?v=1749684235"},{"product_id":"warzone-wz65pi-6-5-inch-mid-range-driver-speaker-1000w-max-4-ohms-25oz-flux-ferrite-magnet-aluminum-dome-tweeter-for-car-audio-systems-2-speakers","title":"Warzone WZ65Pi 6.5\" Mid-Range Driver Speaker Pair","description":"\u003cp\u003eThe Warzone WZ65Pi is a pair of 6.5-inch mid-range driver speakers with integrated aluminum dome tweeters for car-audio systems. It is intended for listeners building an upgraded system that needs dedicated midrange presence and extended high-frequency output. Each pair is specified with a 4-ohm impedance for use with compatible car-audio amplification.\u003c\/p\u003e\u003cp\u003eWith a listed 320-watt rated power handling and 1000-watt peak rating, the WZ65Pi is designed for high-output installations. Its specified 90 dB sensitivity supports efficient output when paired with an appropriately matched amplifier. The stated 110 Hz to 20 kHz frequency response targets upper-bass, midrange, and treble reproduction rather than deep sub-bass duty.\u003c\/p\u003e\u003cp\u003eThe speaker uses a black press-paper cone with a cloth edge to reproduce the midrange portion of the audio signal. A 50 mm aluminum dome tweeter handles the upper-frequency range. This combination is suited to systems seeking clear vocals, instruments, and high-frequency detail from a compact 6.5-inch format.\u003c\/p\u003e\u003cp\u003eA black steel basket provides the structural foundation for the driver assembly. The motor system is listed with a 25-ounce high-density-flux ferrite magnet and a neodymium magnet. These specified materials support the speaker's purpose as a high-output car-audio mid-range and driver solution.\u003c\/p\u003e\u003cp\u003eThe WZ65Pi can be considered for replacement or custom-install locations that accept 6.5-inch speakers, subject to confirming the vehicle's opening, mounting depth, and wiring requirements. Its 4-ohm load should be matched to an amplifier channel rated to operate safely at 4 ohms. For systems requiring low bass, pair it with a properly selected subwoofer rather than relying on this driver for sub-bass reproduction.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Driver Format:\u003c\/strong\u003e Fits applications designed around a common 6.5-inch speaker size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e320W Rated Power:\u003c\/strong\u003e Provides a published continuous-style rated power figure for amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1000W Peak Power:\u003c\/strong\u003e Lists short-duration peak power handling for the speaker pair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible car-audio amplifier channels designed for 4-ohm loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 mm Aluminum Dome Tweeter:\u003c\/strong\u003e Adds dedicated high-frequency reproduction above the midrange driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFerrite Magnet System:\u003c\/strong\u003e Uses a listed 25-ounce high-density-flux ferrite magnet assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ65Pi combines a black steel basket with a black press-paper cone and cloth edge. Its listed magnet system includes a 25-ounce high-density-flux ferrite magnet and a neodymium magnet, while the high-frequency section uses a 50 mm aluminum dome tweeter. The design is intended for car-audio installations where a mid-range driver and tweeter are desired in one speaker assembly.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's speaker opening, mounting depth, terminal clearance, and mounting-hole pattern before installation, as vehicle-specific fitment measurements are not published. Connect each speaker only to a compatible 4-ohm amplifier channel and use appropriate crossover settings to avoid sending sub-bass frequencies below its published 110 Hz lower response limit. The available listing information identifies a two-speaker package, but does not confirm included mounting hardware, grilles, wiring, or a warranty.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":44329031139519,"sku":"B0DT7VZVMG","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71WTSC63ogL.jpg?v=1749684409"},{"product_id":"warzone-wz-e652-6-5-coaxial-car-speakers-650w-max-power-4-ohm-full-range-audio-pei-dome-tweeter-shallow-mount-design-oem-fit-perfect-for-cars-trucks-suvs","title":"Warzone WZ-E652 6.5\" Coaxial Car Speakers","description":"\u003cp\u003eThe Warzone WZ-E652 is a 6.5-inch coaxial car speaker designed as a full-range replacement or upgrade for compatible factory door and panel locations. It combines a woofer and tweeter in one speaker assembly to simplify installation where a standard 6.5-inch opening is available. Its 4-ohm design is intended for conventional automotive speaker applications.\u003c\/p\u003e\u003cp\u003eThis model is aimed at drivers who want to replace worn factory speakers or build a more capable everyday car audio system. The listed 650-watt maximum and 325-watt RMS power ratings support use in systems matched appropriately for the speaker's power handling. Its stated 68Hz–20kHz frequency response covers bass, midrange, and high-frequency content within a single coaxial speaker format.\u003c\/p\u003e\u003cp\u003eThe WZ-E652 uses a 1.2-inch woofer voice coil with a 2-inch PEI dome tweeter. This coaxial layout places high-frequency reproduction at the center of the woofer assembly, helping keep the installation compact. A listed 4.5kHz crossover point divides the woofer and tweeter frequency ranges.\u003c\/p\u003e\u003cp\u003eA ferrite magnet structure provides the motor assembly for the speaker. The shallow 2.88-inch mounting depth is useful for vehicles with limited clearance behind the speaker location. Its 5.52-inch cutout requirement can suit many factory-style 6.5-inch openings, though vehicle-specific fitment should always be checked before purchase.\u003c\/p\u003e\u003cp\u003eThese speakers can be used in compatible cars, trucks, and SUVs as part of a factory-speaker replacement or a broader audio upgrade. Confirm the vehicle's mounting depth, opening diameter, mounting pattern, and wiring requirements before installation. For amplified systems, match the amplifier configuration to the speaker's 4-ohm impedance and listed power rating.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Format:\u003c\/strong\u003e Combines woofer and tweeter in a compact full-range speaker design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e650W Maximum Power:\u003c\/strong\u003e Listed maximum power handling for higher-output car audio applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e325W RMS Rating:\u003c\/strong\u003e Listed continuous power rating for system-matching reference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Supports common automotive speaker wiring configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Uses a 2-inch PEI dome tweeter for high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow Mounting Profile:\u003c\/strong\u003e 2.88-inch mounting depth helps fit tighter speaker locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ-E652 uses a coaxial architecture with a 1.2-inch woofer voice coil, 2-inch PEI dome tweeter, and ferrite magnet structure. This layout integrates the high-frequency driver into the woofer assembly while retaining a conventional 6.5-inch car-speaker footprint. The specified frequency response is 68Hz–20kHz, with a 4.5kHz crossover point.\u003c\/p\u003e\u003cp\u003eVerify the available mounting depth and speaker-opening dimensions before installation. The listed cutout diameter is 5.52 inches and mounting depth is 2.88 inches; mounting-hole patterns and factory connector compatibility are not specified. Use appropriate vehicle-specific mounting hardware or adapters when needed, and confirm amplifier or head-unit compatibility with a 4-ohm speaker load.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":45613517537471,"sku":"783501186939","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71pjb22fsKL.jpg?v=1777926749"},{"product_id":"audio360-ad6510p-6-5-inch-4-way-coaxial-car-speaker-650w-max-power-92db-sensitivity-4-ohm-impedance-perfect-for-custom-installations","title":"Audio360 AD6510P 6.5\" 4-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Audio360 AD6510P is a 6.5-inch 4-way coaxial car speaker designed for vehicle audio upgrades where space and straightforward fitment matter. Its compact format is suited to many door-panel, rear-deck, and custom speaker locations that accept a 6.5-inch driver. It is intended for listeners who want to replace factory speakers or build out an aftermarket sound system.\u003c\/p\u003e\u003cp\u003eThis model combines a 4-way coaxial layout with a 4-ohm nominal impedance for use with compatible aftermarket head units and amplifiers. The 92 dB sensitivity rating supports efficient output from modest-power sources while remaining suitable for amplified systems. Its sound character is aimed at strong midbass presence and clear everyday playback.\u003c\/p\u003e\u003cp\u003eThe AD6510P is rated at 650 watts maximum power and 325 watts RMS per speaker. These published ratings make proper amplifier gain setting especially important for reliable operation. Match the system carefully and avoid driving the speakers into audible distortion.\u003c\/p\u003e\u003cp\u003eAn injection-molded cone and rubber edge form the core of the speaker's woofer assembly. This material combination is designed to provide a durable moving surface while helping control cone movement. The coaxial construction keeps the multi-driver arrangement in a single speaker location, which can simplify an upgrade where separate tweeter mounting is not planned.\u003c\/p\u003e\u003cp\u003eWith a stated 2.76-inch mounting depth and 5.63-inch cutout diameter, the AD6510P can be considered for installations with limited rear clearance. Verify the vehicle's factory opening, available depth, mounting-hole pattern, and window or mechanism clearance before purchase. It can serve as part of a front- or rear-speaker upgrade when paired with compatible wiring and source equipment.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Format:\u003c\/strong\u003e Fits many common vehicle speaker locations and custom panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Way Design:\u003c\/strong\u003e Combines multiple drivers into one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e650W Maximum Power:\u003c\/strong\u003e Provides published headroom for compatible amplified systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e325W RMS Rating:\u003c\/strong\u003e Helps guide amplifier matching and gain adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92 dB Sensitivity:\u003c\/strong\u003e Supports efficient output with compatible source power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with many aftermarket head units and amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD6510P uses an injection-molded cone with a rubber edge for a durable speaker assembly. Its 4-way coaxial design places the speaker elements together in a compact footprint. This makes it practical for installations that do not have separate locations for dedicated tweeters.\u003c\/p\u003e\u003cp\u003eConfirm that your vehicle supports a 5.63-inch cutout and at least 2.76 inches of mounting depth before installation. Use appropriate vehicle-specific brackets or adapters when required, and check clearance behind the speaker before fastening it in place. For amplified use, set gains conservatively and use compatible 4-ohm-capable equipment.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":45613555712191,"sku":"783501184393","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71FgnYTL49L.jpg?v=1777930169"},{"product_id":"stx-audio-mx65-2g-6-5-inch-2-way-rgb-led-marine-coaxial-speakers-350w-max-4-ohms-water-resistant-with-remote-control-for-rgb-illumination-2-speakers","title":"STX Audio MX65-2G 6.5\" RGB LED Marine Speakers","description":"\u003cp\u003eThe STX Audio MX65-2G is a pair of 6.5-inch marine coaxial speakers designed to add audio and RGB illumination to a boat or other water-exposed audio installation. Their water-resistant construction addresses the need for speakers suited to environments where moisture and splashes are a concern. The package includes two speakers for a matched left\/right installation.\u003c\/p\u003e\u003cp\u003eEach speaker uses a 2-way coaxial layout, combining the system’s drivers into a single 6.5-inch speaker assembly. This format is well suited to installations where space is limited and a conventional round marine speaker location is available. The speakers present a 4-ohm load for compatibility with appropriately matched audio equipment.\u003c\/p\u003e\u003cp\u003eThe MX65-2G is rated for up to 350 watts maximum power handling. It is intended for listeners who want a compact marine speaker upgrade with both music playback and integrated accent lighting. Because no RMS rating is confirmed, amplifier selection should be based on the equipment manufacturer’s guidance and careful gain setup.\u003c\/p\u003e\u003cp\u003eIntegrated RGB LED illumination gives the speakers a visual element in addition to their audio role. A remote control is included for operating the RGB illumination, allowing lighting adjustments without changing the audio source. This makes the pair suitable for marine audio systems where coordinated lighting is part of the installation plan.\u003c\/p\u003e\u003cp\u003eUse the MX65-2G as a stereo pair in a marine audio system with a compatible 4-ohm amplifier or receiver. Their 6.5-inch nominal size can suit many common speaker locations, but mounting dimensions have not been confirmed and should be checked before installation. The water-resistant design makes them a practical option where conventional indoor speakers are not appropriate.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Speaker Size:\u003c\/strong\u003e Fits installations designed around a common round marine-speaker format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Combines the speaker system into one compact assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e350W Maximum Handling:\u003c\/strong\u003e Supports higher-output marine audio system applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with audio equipment designed for 4-ohm speaker loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB LED Illumination:\u003c\/strong\u003e Adds adjustable lighting to the speaker installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Remote Control:\u003c\/strong\u003e Provides control of the RGB illumination functions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MX65-2G uses a water-resistant marine-oriented design with integrated RGB LED illumination. It is sold as a pair of 6.5-inch, 2-way coaxial speakers for matched stereo placement. Specific cone, surround, basket, magnet, and IP-rating details are not confirmed.\u003c\/p\u003e\u003cp\u003eBefore installation, verify the mounting cutout, mounting depth, grille clearance, and wiring access at the intended location, as exact mounting dimensions are not confirmed. Connect the speakers to equipment compatible with a 4-ohm load and route the RGB illumination wiring according to the supplied instructions. Set amplifier gain conservatively to avoid stressing the speakers.\u003c\/p\u003e","brand":"STX AUDIO","offers":[{"title":"Default Title","offer_id":45613581107391,"sku":"783501155560","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71FWB0m9MhL.jpg?v=1777933049"},{"product_id":"stx-audio-mx65-2w-6-5-inch-2-way-rgb-led-marine-coaxial-speakers-350w-max-4-ohms-water-resistant-with-remote-control-for-rgb-illumination-2-speakers","title":"STX Audio MX65-2W 6.5\" RGB LED Marine Coaxial Speakers","description":"\u003cp\u003eThe STX Audio MX65-2W is a pair of 6.5-inch marine coaxial speakers designed to add audio and RGB illumination to boats and other water-exposed recreational installations. Its 2-way coaxial layout combines the speaker elements into each assembly, helping simplify a compact speaker upgrade. The white presentation and integrated RGB LED lighting suit installations where a coordinated marine-audio appearance is desired.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for shoppers replacing or adding 6.5-inch speakers in a marine audio system. Their 4-ohm nominal impedance supports use with audio equipment designed for 4-ohm speakers. Confirm available mounting clearance, wiring, and amplifier or receiver compatibility before installation.\u003c\/p\u003e\u003cp\u003eThe MX65-2W is rated for up to 350 watts maximum power and is sold as a two-speaker set. This makes it suitable for left- and right-channel use in a stereo system. For system matching, use the amplifier or receiver manufacturer’s guidance and avoid treating the maximum-power figure as a continuous-power rating.\u003c\/p\u003e\u003cp\u003eIntegrated RGB LED illumination provides a visual accent around the speakers, while the included remote control is intended for RGB lighting operation. The lighting function lets users tailor the appearance of a compatible installation without changing the speaker pair. Audio wiring and RGB-lighting connections should be planned separately during setup.\u003c\/p\u003e\u003cp\u003eWater-resistant construction makes the pair appropriate for marine-oriented applications where speakers may encounter moisture. They can be used as part of a boat-audio refresh or alongside a compatible 4-ohm amplifier, receiver, and RGB lighting wiring arrangement. Because the published information does not provide mounting dimensions or continuous-power handling, verify those requirements against the physical installation and connected equipment.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Size:\u003c\/strong\u003e Fits applications designed around 6.5-inch speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Combines speaker elements within each speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB LED Illumination:\u003c\/strong\u003e Adds selectable decorative lighting to the speaker installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Control Included:\u003c\/strong\u003e Provides control for the RGB illumination function.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches audio systems designed for 4-ohm speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Resistant Construction:\u003c\/strong\u003e Suits marine-oriented installations exposed to moisture.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MX65-2W uses a white marine-style presentation with integrated RGB LED illumination. It is described as water-resistant rather than as an immersion-rated product, so installation location and exposure should be considered carefully. The pair configuration provides two matching speakers for a stereo installation.\u003c\/p\u003e\u003cp\u003eVerify that the mounting location accepts a 6.5-inch speaker and has sufficient depth and clearance before cutting or fastening anything. Connect the audio terminals to a compatible 4-ohm-capable amplifier or receiver, then connect the RGB lighting system according to its supplied instructions. Use appropriately protected marine-grade wiring and secure connections for installations exposed to moisture and vibration.\u003c\/p\u003e","brand":"STX AUDIO","offers":[{"title":"Default Title","offer_id":45613581435071,"sku":"783501155577","price":72.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71TsFCB786L.jpg?v=1777933189"},{"product_id":"stx-audio-650c-6-5-inch-2-way-car-audio-component-speakers-system-6-1-2-inches","title":"STX Audio STX-650C 6.5\" 2-Way Component Speakers","description":"\u003cp\u003eThe STX Audio STX-650C is a 6.5-inch, 2-way car audio component speaker system designed as an upgrade from factory-installed speakers. It uses separate woofers, tweeters, and crossover networks to divide the audio signal between the drivers. This format is suited to vehicles with compatible 6.5-inch door or rear-deck speaker locations and separate tweeter mounting provisions.\u003c\/p\u003e\u003cp\u003eThe system is rated at 90 watts RMS per speaker, or 180 watts RMS for the pair. Published marketplace information also lists 325 watts maximum per speaker and 650 watts maximum for the pair. Its 4-ohm impedance is commonly compatible with aftermarket multichannel amplifiers and many factory speaker circuits.\u003c\/p\u003e\u003cp\u003eThe STX-650C combines a polypropylene-based woofer design with 1-inch balanced-dome tweeters. Published listings describe an IMPP cone with a carbon-fiber finish and butyl rubber surround, while also identifying an injection-molded polypropylene woofer and treated woven-cloth surround. Because these material descriptions vary between available listings, confirm the contents and finish of the specific package before installation.\u003c\/p\u003e\u003cp\u003eA separate 2-way crossover network is included in the published product details to route appropriate frequency ranges to the woofer and tweeter. The crossover is described as having a 12 dB-per-octave roll-off and ferro-fluid cooling. Surface- and flush-mount hardware is listed for the tweeters, offering flexibility when choosing their final location.\u003c\/p\u003e\u003cp\u003eThis component set can be used with a factory head unit or paired with a multichannel amplifier as part of a larger vehicle-audio upgrade. One listing recommends an amplifier rated at least 700 watts to maximize the system, though amplifier selection should also be based on stable power output at the speakers' 4-ohm load. Match mounting dimensions, wiring routes, crossover placement, and vehicle-specific adapters before purchasing.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Component System:\u003c\/strong\u003e Separate drivers and crossovers support a more flexible installation layout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e180-Watt RMS Pair Rating:\u003c\/strong\u003e Provides a published continuous-power rating for amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Fits common aftermarket car-audio amplifier configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Dome Tweeters:\u003c\/strong\u003e Dedicated high-frequency drivers handle upper-range reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded 2-Way Crossovers:\u003c\/strong\u003e Direct frequencies to the appropriate woofer and tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Tweeter Mounting:\u003c\/strong\u003e Included hardware supports surface or flush installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003ePublished product details identify a 6.5-inch woofer with a polypropylene-based cone construction and a 1-inch balanced-dome tweeter. The system is also listed with aluminum voice coils, an 8-ounce magnet, ferro-fluid cooling, and transparent 2-way crossover housings. Marketplace descriptions differ on certain woofer-cone and surround materials, so package contents should be verified before ordering.\u003c\/p\u003e\u003cp\u003eInstall the woofers in compatible 6.5-inch speaker openings and mount the tweeters using the supplied surface- or flush-mount hardware where appropriate. Place each crossover in a protected, dry location and wire it between the amplifier or head-unit output and its corresponding woofer and tweeter. Verify vehicle fitment, polarity, mounting depth, and available space for the crossover modules before beginning installation.\u003c\/p\u003e","brand":"STX AUDIO","offers":[{"title":"Default Title","offer_id":45613581828287,"sku":"783501106265","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/818lqBWgnWL.jpg?v=1777933275"},{"product_id":"stx-audio-650w-6-5-inch-4-way-car-audio-coaxial-speakers-system-6-1-2-inches","title":"STX Audio STX-654 6.5\" 4-Way Coaxial Speakers","description":"\u003cp\u003eThe STX Audio STX-654 is a 6.5-inch, 4-way coaxial speaker system designed for replacing compatible factory car speakers. Its coaxial format combines multiple speaker elements into a single mounting location, helping retain a straightforward door- or panel-speaker upgrade path. The system is rated at 4 ohms per speaker for use in common automotive audio applications.\u003c\/p\u003e\u003cp\u003eThis speaker set is intended for drivers who want to refresh aging factory speakers or build a basic full-range system without adding separate component speaker locations. It can be operated from a factory head unit or paired with a multichannel amplifier. With 90 watts RMS rated per speaker, it offers a practical power-handling match for moderate aftermarket amplification.\u003c\/p\u003e\u003cp\u003eThe STX-654 uses a 4-way full-range design to cover a broad listening range from a compact 6.5-inch format. Its listed 60 Hz to 20 kHz frequency response is suited to reproducing much of the vocal, instrument, and high-frequency content in a vehicle audio system. Dedicated subwoofers may still be useful in systems that need stronger low-bass output.\u003c\/p\u003e\u003cp\u003eA silk-dome tweeter is integrated with the woofer assembly, while the woofer is listed with a polypropylene construction. This integrated arrangement keeps the high-frequency driver aligned with the main speaker location and avoids the need to mount a separate tweeter. A moisture-resistant rubber surround is also specified for the speaker design.\u003c\/p\u003e\u003cp\u003eFor installation, the STX-654 is built around an anti-resonant stamped-steel basket and uses spade speaker terminals. Its listed 2-7\/8-inch mounting depth should be checked against available clearance behind the intended mounting panel. It can serve as a direct-size replacement where a vehicle accepts 6.5-inch speakers, subject to verifying vehicle-specific cutout, mounting-hole, and depth requirements.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Format:\u003c\/strong\u003e Fits applications designed for compatible 6.5-inch car speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Way Full-Range Design:\u003c\/strong\u003e Combines multiple speaker elements in one assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90W RMS Per Speaker:\u003c\/strong\u003e Supports moderate continuous amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches common automotive speaker wiring configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilk-Dome Tweeter:\u003c\/strong\u003e Adds dedicated high-frequency reproduction within the speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Provides a rigid mounting structure for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe STX-654 combines a polypropylene woofer and silk-dome tweeter in a single coaxial assembly. It is specified with a moisture-resistant rubber surround, anti-resonant stamped-steel basket, 3-1\/8-inch magnet, and 2-3\/8-inch coil. Spade speaker terminals are provided for speaker-wire connection.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts 6.5-inch speakers and has at least 2-7\/8 inches of usable mounting depth before installation. These speakers can be connected to a compatible factory head unit or a multichannel amplifier, with 4-ohm speaker-channel compatibility and appropriate power matching. Mounting hardware, adapters, and wiring accessories are not confirmed in the available product information.\u003c\/p\u003e","brand":"STX AUDIO","offers":[{"title":"Default Title","offer_id":45613584842943,"sku":"783501106258","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81n5OOyNwUL.jpg?v=1777933326"},{"product_id":"stx-audio-2x-stx65ps-6-5-inch-super-mid-range-speaker-pair-4-ohm-1000w-max-400w-rms-95db-sensitivity-1-5-voice-coil-30oz-ferrite-magnet-for-pro-car-audio","title":"STX Audio STX-65PS 6.5\" Midrange Speaker Pair","description":"\u003cp\u003eThe STX Audio STX-65PS is a pair of 6.5-inch car-audio midrange speakers designed to reproduce vocals, instruments, and other mid-frequency detail. It is intended for systems that need more projection and output than a typical factory full-range speaker. Each pair uses a 4-ohm speaker design and is suited to custom vehicle audio installations.\u003c\/p\u003e\u003cp\u003eThe STX-65PS is specified for 400 watts RMS and 1,000 watts maximum system power per pair. Its 95 dB sensitivity rating supports strong output from an appropriately matched amplifier. The 100 Hz to 16 kHz frequency range places its focus on midrange performance rather than deep bass reproduction.\u003c\/p\u003e\u003cp\u003eA black pressed-paper cone is paired with a cloth-edge surround to provide the moving assembly for midrange playback. This material combination is specified for natural mid-frequency reproduction. The speakers are midrange drivers, so a complete system may use separate subwoofers and tweeters to cover frequencies outside their stated range.\u003c\/p\u003e\u003cp\u003eThe driver motor uses a 30-ounce ferrite magnet and a 1.5-inch high-temperature voice coil. A reinforced steel basket supports the driver assembly. These construction details are intended for installations where speakers will be used at elevated playback levels.\u003c\/p\u003e\u003cp\u003eThe STX-65PS has a 6.57-inch overall diameter, a 5.37-inch cutout requirement, and a 2.52-inch mounting depth. Those dimensions make it important to measure the vehicle opening and rear clearance before installation. It can be used in compatible doors, speaker pods, or custom panels when the mounting dimensions and system design are appropriate.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Midrange Drivers:\u003c\/strong\u003e A matched pair for dedicated vehicle midrange reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400W RMS System Rating:\u003c\/strong\u003e Provides a continuous power-handling reference for the pair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e95 dB Sensitivity:\u003c\/strong\u003e Supports efficient, high-output operation with suitable amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed-Paper Cone:\u003c\/strong\u003e Delivers the specified midrange driver construction and response character.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-Ounce Ferrite Magnet:\u003c\/strong\u003e Forms the speaker's specified magnetic motor structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.5-Inch Voice Coil:\u003c\/strong\u003e Uses a high-temperature coil design for power handling.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe STX-65PS combines a black pressed-paper cone, cloth-edge surround, reinforced steel basket, ferrite magnet, and high-temperature voice coil. Its construction is focused on a dedicated midrange-driver role. The listed frequency response is 100 Hz to 16 kHz.\u003c\/p\u003e\u003cp\u003eConfirm the 5.37-inch cutout, 2.52-inch mounting depth, and 6.57-inch overall diameter against the intended mounting location before purchase. Use an amplifier and crossover strategy appropriate for 4-ohm midrange speakers, and avoid sending deep-bass content below the speaker's stated operating range. The package is identified as a pair of speakers; mounting hardware, grilles, and other accessories are not confirmed.\u003c\/p\u003e","brand":"STX AUDIO","offers":[{"title":"Default Title","offer_id":45613584974015,"sku":"783501184287","price":69.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71lBaeL7hgL.jpg?v=1777933365"},{"product_id":"stx-audio-2x-stx65px-6-5-inch-super-mid-range-speaker-pair-4-ohm-3000w-max-1120w-rms-97db-sensitivity-1-75-voice-coil-38oz-ferrite-magnet-for-pro-car-audio","title":"STX Audio STX-65PX 6.5\" Midrange Speaker Pair","description":"\u003cp\u003eThe STX Audio STX-65PX is a pair of 6.5-inch pro-style midrange speakers designed for car-audio systems that prioritize strong vocal and instrument output. They are intended for amplified installations where factory speakers do not provide the required midrange presence or output capability. The pair format makes them suitable for upgrading two speaker positions in a door panel, pod, or custom installation.\u003c\/p\u003e\u003cp\u003eWith 560 watts RMS power handling per speaker, the STX-65PX is built for systems using substantial external amplification. Its 97 dB sensitivity rating supports efficient output from compatible amplification, while its 95 Hz to 12 kHz frequency-response range focuses on the vocal and midrange portion of the music spectrum. These are midrange drivers, so a complete system may also use dedicated tweeters and subwoofers for frequency ranges outside their intended operating band.\u003c\/p\u003e\u003cp\u003eThe speaker uses a black pressed-paper cone and cloth surround to reproduce midrange material with a direct, natural character. A 1.75-inch high-temperature voice coil is specified to support thermal stability when the speakers are used at elevated listening levels. This construction is aimed at high-output daily systems and custom pro-audio-style vehicle builds.\u003c\/p\u003e\u003cp\u003eA 38-ounce ferrite magnet provides the motor structure behind each driver, while the reinforced steel basket supports the cone assembly. The steel-frame design is intended to provide a durable mounting platform for door, panel, and speaker-pod installations. These speakers are sold as a matched pair for left- and right-side placement.\u003c\/p\u003e\u003cp\u003eThe STX-65PX uses a conventional 6.5-inch speaker footprint, with a 5.9-inch cutout requirement and 3.11-inch mounting depth. Confirm available depth behind the panel, window clearance, and the mounting-hole pattern before installation. For reliable results, pair the speakers with an amplifier and crossover settings appropriate for their RMS power rating and stated frequency range.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Midrange Pair:\u003c\/strong\u003e Provides two matching drivers for a two-position vehicle upgrade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e560W RMS Per Speaker:\u003c\/strong\u003e Supports use in appropriately amplified high-output systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e97 dB Sensitivity:\u003c\/strong\u003e Helps produce strong output with compatible amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e95 Hz–12 kHz Response:\u003c\/strong\u003e Covers core vocal and instrument midrange frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.75-Inch Voice Coil:\u003c\/strong\u003e Uses a high-temperature coil design for sustained operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e38-Ounce Ferrite Magnet:\u003c\/strong\u003e Provides the speaker motor structure for controlled driver movement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe STX-65PX combines a black pressed-paper cone, cloth surround, reinforced steel basket, ferrite magnet, and high-temperature voice coil. These materials support a durable pro-style midrange-driver design intended for amplified car-audio applications. The pair has a stated overall diameter of 6.81 inches.\u003c\/p\u003e\u003cp\u003ePlan for a 5.9-inch cutout and at least 3.11 inches of mounting depth, then verify clearance in the intended door, panel, or pod before cutting or fastening. Use an external amplifier matched conservatively to the 560-watt RMS rating per speaker, and use appropriate crossover configuration to keep deep bass and frequencies above the stated operating range out of the drivers. Installation hardware, wiring, grilles, and crossover components are not confirmed as included.\u003c\/p\u003e","brand":"STX AUDIO","offers":[{"title":"Default Title","offer_id":45613585072319,"sku":"783501184928","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71MAmT2xEBL.jpg?v=1777933387"},{"product_id":"stx-audio-stx65mtb-600w-marine-wakeboard-tower-speaker-6-5-inch-2-way-system-rgb-led-lighting-compact-size-ideal-for-boats-utvs-and-atvs","title":"STX Audio STX65MTB 6.5\" Marine Tower Speaker","description":"\u003cp\u003eThe STX Audio STX65MTB is a 6.5-inch marine wakeboard tower speaker designed for boats and off-road recreational vehicles. Its enclosed pod design provides an externally mounted audio solution for wakeboard towers, roll bars, and similar tubular mounting locations. It is intended for systems where conventional in-panel marine speakers are not the preferred fit.\u003c\/p\u003e\u003cp\u003eThis speaker is suited to boat, UTV, ATV, and off-road audio upgrades that need sound aimed toward passengers or an open riding area. The multi-angle rotating aluminum clamp allows the pod to be directed after installation. That adjustability can help tailor coverage to the seating area or riding space.\u003c\/p\u003e\u003cp\u003eThe STX65MTB uses a 2-way speaker design with a 6.5-inch injection-molded polypropylene woofer and a 0.8-inch neodymium tweeter. This configuration is designed to reproduce midrange and high-frequency detail from a compact tower-mounted enclosure. Listed power handling is 300 watts RMS and 600 watts peak.\u003c\/p\u003e\u003cp\u003eFor outdoor use, the speaker is housed in a sealed ASA enclosure and uses a Santoprene surround. The product is described as water-resistant, UV-resistant, and corrosion-resistant for marine and off-road environments. Its materials focus on supporting installation where sun, moisture, and changing weather are regular considerations.\u003c\/p\u003e\u003cp\u003eIntegrated 12V RGB LED lighting adds illumination around the speaker for nighttime use. The speaker can be incorporated into a compatible amplified marine or powersports audio system, while its RGB wiring is connected separately from the audio wiring. It is a practical option for adding a directional tower speaker without changing the vehicle's main source unit.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Tower Speaker:\u003c\/strong\u003e Compact enclosed speaker pod for marine and off-road mounting locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Driver Layout:\u003c\/strong\u003e Combines a polypropylene woofer with a separate neodymium tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Handling:\u003c\/strong\u003e Supports amplifier matching based on the listed continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed ASA Enclosure:\u003c\/strong\u003e Uses an outdoor-oriented enclosure material for exposed installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotating Aluminum Clamp:\u003c\/strong\u003e Allows the speaker direction to be adjusted after mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12V RGB Lighting:\u003c\/strong\u003e Adds selectable RGB illumination through a separate lighting connection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe STX65MTB combines a sealed ASA speaker pod with an injection-molded polypropylene woofer and Santoprene surround. Its aluminum mounting clamp is designed for tower, roll-bar, and similar tubular applications. The black enclosed form keeps the speaker assembly externally mounted rather than requiring a conventional speaker cutout.\u003c\/p\u003e\u003cp\u003eConfirm the mounting-bar diameter, clearance, clamp fit, and wiring route before installation. Connect the speaker to an amplifier matched appropriately to its listed 300-watt RMS rating, and run the RGB lighting connection to a suitable 12V RGB lighting setup. The package is listed with an adjustable aluminum mounting bracket, mounting hardware, and an RGB LED wiring connection kit.\u003c\/p\u003e","brand":"STX AUDIO","offers":[{"title":"Default Title","offer_id":45613590315199,"sku":"783501193906","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81XuhiS85BL.jpg?v=1777934519"},{"product_id":"stx-audio-stx65mtw-marine-wakeboard-tower-speakers-600w-max-power-rgb-led-lighting-compact-design-for-boats-and-utvs","title":"STX Audio STX65MTW 6.5\" Marine Wakeboard Tower Speaker","description":"\u003cp\u003eThe STX Audio STX65MTW is a 6.5-inch marine wakeboard tower speaker designed for boat towers, UTVs, ATVs, and other open-air audio installations. Its compact enclosure helps add elevated, outward-facing sound where conventional in-cabin speakers may not project effectively. Integrated RGB LED lighting also adds visual accent lighting for nighttime use.\u003c\/p\u003e\u003cp\u003eWith a stated 300 watts RMS and 600 watts maximum power rating, the STX65MTW is intended for systems that need stronger output in noisy outdoor environments. The 2-way design combines a polypropylene woofer with an NdFeB tweeter for balanced midrange detail and high-frequency presence. This configuration is suited to music playback across open water, trails, and other areas where wind and engine noise can compete with the audio system.\u003c\/p\u003e\u003cp\u003eThe speaker uses a 6.5-inch injection-molded polypropylene woofer with a 1.2-inch voice coil and a Santoprene surround. These materials are selected for outdoor speaker use, where the driver may be exposed to changing temperatures and moisture. A 0.8-inch NdFeB tweeter completes the 2-way system for clear upper-frequency reproduction.\u003c\/p\u003e\u003cp\u003eAn ASA sealed enclosure supports use in marine and powersports environments by helping protect the speaker assembly from UV exposure, water, and weather. The housing measures approximately 11.61 inches high, 10.59 inches deep, and 6.97 inches wide. This relatively compact format can be useful when tower, roll-bar, or overhead mounting space is limited.\u003c\/p\u003e\u003cp\u003eThe STX65MTW uses a multi-angle rotating aluminum mount so the speaker can be aimed toward riders, passengers, or a surrounding area. Its integrated 12-volt RGB LED system can complement a compatible lighting setup on a boat or off-road vehicle. For a complete installation, plan for appropriate audio amplification, speaker wiring, mounting verification, and a suitable 12-volt RGB lighting connection.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Rating:\u003c\/strong\u003e Supports higher-output outdoor audio system designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Polypropylene Woofer:\u003c\/strong\u003e Delivers durable midrange and bass foundation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.8-Inch NdFeB Tweeter:\u003c\/strong\u003e Adds defined high-frequency detail to the 2-way design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eASA Sealed Enclosure:\u003c\/strong\u003e Helps suit the speaker for marine and outdoor exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotating Aluminum Mount:\u003c\/strong\u003e Allows sound direction to be adjusted after installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12V RGB LED Lighting:\u003c\/strong\u003e Adds integrated accent illumination for night use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe STX65MTW combines an ASA sealed enclosure with an injection-molded polypropylene woofer cone and Santoprene surround. Its materials are intended to support marine and outdoor use where UV exposure, water, and weather are concerns. The compact pod-style housing is finished around a 6.5-inch 2-way speaker layout with integrated RGB lighting.\u003c\/p\u003e\u003cp\u003eMount the speaker to a suitably strong wakeboard tower, roll bar, or other compatible structure using its rotating aluminum mount, while confirming clearance for its 11.61-inch height, 10.59-inch depth, and 6.97-inch width. Aim the enclosure toward the desired listening area before securing it, and route audio and RGB wiring away from moving parts and heat sources. Amplifier power, speaker impedance compatibility, mounting-bar fitment, and RGB control requirements should be verified before installation because those details are not confirmed in the available product information.\u003c\/p\u003e","brand":"STX AUDIO","offers":[{"title":"Default Title","offer_id":45613590347967,"sku":"783501193913","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71z1oKGrOPL.jpg?v=1777934537"},{"product_id":"stx-audio-stx65mxb-6-5-marine-coaxial-speaker-600w-power-rgb-led-waterproof-compact-design-ideal-for-boats-off-road-vehicles","title":"STX Audio STX65MXB 6.5\" Marine Coaxial Speaker","description":"\u003cp\u003eThe STX Audio STX65MXB is a 6.5-inch marine coaxial speaker designed for boats, UTVs, ATVs, and other exposed outdoor audio installations. It provides a compact speaker option where moisture, sunlight, and limited mounting space are practical concerns. Its coaxial layout combines the woofer and high-frequency driver into one installation location.\u003c\/p\u003e\u003cp\u003eThis model is intended for listeners who need sound reinforcement in open-air environments where wind, water, road noise, and engine noise can reduce music clarity. The listed 600-watt maximum power rating and 300-watt continuous RMS rating position it for systems using appropriately matched amplification. A 2-way design is used to reproduce both midrange and high-frequency content from a single speaker location.\u003c\/p\u003e\u003cp\u003eThe STX65MXB uses marine-oriented materials including a PC-ABS basket with UV inhibitors and an ASA grille. These materials are specified to help the speaker withstand outdoor exposure in marine and powersports applications. Its black finish and integrated RGB lighting suit installations where the speaker is part of the visible design.\u003c\/p\u003e\u003cp\u003eIntegrated 12-volt RGB LED lighting adds illumination around the speaker for nighttime boating, off-road use, or outdoor gatherings. The lighting requires a compatible 12-volt RGB connection as part of the installation. Audio wiring and LED wiring should be planned separately during system setup.\u003c\/p\u003e\u003cp\u003eWith a 6.8-inch overall diameter, 4.84-inch mounting width, and 2.41-inch mounting depth, the STX65MXB is sized for many standard 6.5-inch speaker positions when clearance is confirmed. It can be used as part of a marine or powersports speaker upgrade, with source-unit or amplifier power matched to the speaker's rated capacity. Check the mounting opening, rear-depth clearance, wiring route, and environmental sealing requirements before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and high-frequency reproduction in one compact speaker location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600W Maximum Power:\u003c\/strong\u003e Supports higher-output marine and powersports audio system designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Rating:\u003c\/strong\u003e Provides a continuous-power reference for amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB LED Lighting:\u003c\/strong\u003e Adds 12-volt color lighting to compatible installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Oriented Materials:\u003c\/strong\u003e Uses a UV-inhibited PC-ABS basket and ASA grille.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow Mounting Depth:\u003c\/strong\u003e Fits installations with 2.41 inches of rear clearance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe STX65MXB is built with a PC-ABS basket containing UV inhibitors and an ASA grille. This material combination is specified for outdoor and marine environments where sun exposure and moisture are common. The compact round profile is designed for conventional 6.5-inch-class speaker locations.\u003c\/p\u003e\u003cp\u003eConfirm that the mounting opening accommodates the listed 4.84-inch mounting width and that at least 2.41 inches of rear depth is available. Connect the speaker to an amplifier or receiver with power matched appropriately to its published ratings, and connect the RGB lighting to a suitable 12-volt RGB lighting circuit. For boat and off-road installations, use wiring, connections, and mounting practices appropriate for exposed environments.\u003c\/p\u003e","brand":"STX AUDIO","offers":[{"title":"Default Title","offer_id":45613590380735,"sku":"783501193883","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71ZF3u-vI3L.jpg?v=1777934555"},{"product_id":"stx-audio-stx65mxw-6-5-marine-coaxial-speakers-600w-max-power-rgb-led-lighting-waterproof-ideal-for-boats-utvs-and-atvs","title":"STX Audio STX65MXW 6.5\" Marine Coaxial Speakers","description":"\u003cp\u003eThe STX Audio STX65MXW is a 6.5-inch marine coaxial speaker designed for audio systems exposed to water, sunlight, and outdoor use. It is suited to boats, UTVs, ATVs, and similar applications where conventional interior speakers may not be appropriate. Its white finish and integrated RGB illumination help it coordinate with marine and powersports installations.\u003c\/p\u003e\u003cp\u003eThis 2-way coaxial design places the high-frequency driver within the main speaker assembly, providing a compact full-range speaker solution. It is intended to reproduce midrange and high-frequency content from a compatible marine, powersports, or vehicle audio system. The design can simplify an upgrade where space for separate tweeters and crossovers is limited.\u003c\/p\u003e\u003cp\u003eThe STX65MXW is rated at 300 watts RMS and 600 watts maximum power. Power handling should be matched carefully with the output rating and gain settings of the connected amplifier or head unit. Proper system setup helps support clean playback and protects the speakers from overload.\u003c\/p\u003e\u003cp\u003eFor outdoor durability, the speaker uses a PC-ABS basket and an ASA grille. These materials are specified for resistance to water, UV exposure, and demanding environmental conditions. This construction makes the STX65MXW a practical option for open-air installations where weather resistance is a key consideration.\u003c\/p\u003e\u003cp\u003eIts 6.8-inch overall diameter, 4.84-inch mounting width, and 2.41-inch mounting depth are designed for many 6.5-inch factory and aftermarket speaker locations. The relatively shallow mounting depth can be useful in panels with limited rear clearance. Always measure the available opening, mounting surface, and depth behind the panel before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Marine Speaker:\u003c\/strong\u003e Compact coaxial format for marine and powersports audio locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Combines high- and mid-frequency reproduction in one assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Rating:\u003c\/strong\u003e Supports amplifier matching based on continuous power handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600W Maximum Power:\u003c\/strong\u003e Provides a stated peak-power handling reference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated RGB LEDs:\u003c\/strong\u003e Adds 12V accent lighting to compatible installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Materials:\u003c\/strong\u003e PC-ABS basket and ASA grille support outdoor use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe STX65MXW uses a white PC-ABS basket with an ASA grille for a marine-oriented exterior. The materials are specified to resist water, UV rays, and harsh outdoor conditions. Its integrated RGB LED lighting adds a visual element without changing the speaker's coaxial mounting format.\u003c\/p\u003e\u003cp\u003eConfirm that the installation location supports the 6.8-inch overall diameter, 4.84-inch mounting width, and 2.41-inch mounting depth before cutting or drilling. Connect the speaker to an appropriately matched audio source or amplifier, and wire the RGB lighting to a suitable 12V lighting circuit according to the installation instructions. These speakers are intended for boats, UTVs, ATVs, and other outdoor-capable audio systems.\u003c\/p\u003e","brand":"STX AUDIO","offers":[{"title":"Default Title","offer_id":45613590610111,"sku":"783501193890","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61iQHKkd_pL.jpg?v=1777934570"},{"product_id":"stx-audio-2x-x65-2b-6-5-midrange-speaker-850-watts-max-power-4-ohm-91-db-sensitivity-black-press-paper-cone-for-car-audio-with-high-capacitor-and-black-grills-1-pair","title":"STX Audio X65-2B 6.5\" Midrange Speakers","description":"\u003cp\u003eThe STX Audio X65-2B is a pair of 6.5-inch car-audio midrange speakers designed to add dedicated vocal and instrument presence to a vehicle sound system. It is intended for listeners building or refreshing a system that needs clearer midrange reproduction than a basic full-range replacement speaker may provide. The pair is rated at 4 ohms and is suited to compatible car-audio amplification and speaker wiring configurations.\u003c\/p\u003e\u003cp\u003eThese speakers are specified with up to 850 watts of maximum power handling and a 91 dB sensitivity rating. Their published 95 Hz to 20 kHz frequency-response range places the focus on the midrange and upper-frequency content that helps voices, guitars, horns, and percussion remain defined. RMS power handling is not specified, so amplifier matching should not be based on the maximum-power figure alone.\u003c\/p\u003e\u003cp\u003eThe X65-2B uses black press-paper cones for its primary radiating surface. This construction is paired with a listed high capacitor intended to support the speaker's midrange-frequency application. The result is a purpose-built midrange speaker format rather than a confirmed full coaxial speaker system.\u003c\/p\u003e\u003cp\u003eEach pair includes black protective grills to help shield the cones in exposed or custom-install locations. The grills also provide a finished appearance for installations where the speakers are visible through a panel or mounted on a custom baffle. Black cone and grill styling keeps the presentation understated in a wide range of vehicle interiors.\u003c\/p\u003e\u003cp\u003eThe X65-2B can be used as part of a multi-speaker car-audio build where a separate subwoofer handles low bass and other drivers cover frequencies outside the intended midrange role. Confirm mounting dimensions, available mounting depth, crossover strategy, and amplifier suitability before installation, as those details are not published for this model. The package is sold as one pair, providing two matching 6.5-inch speakers for a stereo installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Midrange Format:\u003c\/strong\u003e Designed for dedicated midrange duties in a car-audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e850W Maximum Power:\u003c\/strong\u003e Listed maximum power handling supports higher-output system planning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Fits compatible 4-ohm car-audio amplifier and speaker configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e91 dB Sensitivity:\u003c\/strong\u003e Published sensitivity indicates efficient output relative to input power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e95 Hz–20 kHz Response:\u003c\/strong\u003e Covers a broad published midrange and upper-frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrills and Capacitor Included:\u003c\/strong\u003e Includes black protective grills and a listed high capacitor.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe X65-2B has a black press-paper cone and black protective grills. Its visual design is suited to installations where the drivers may remain exposed, while the included grills help protect the speaker faces from incidental contact. The listing identifies this product as a pair of black 6.5-inch midrange speakers.\u003c\/p\u003e\u003cp\u003eVerify the vehicle's mounting opening, mounting depth, fastener pattern, and panel clearance before purchasing because cutout and depth specifications are not confirmed. Use compatible 4-ohm speaker wiring and an appropriately configured amplifier or crossover setup; no RMS rating, crossover frequency, or wiring gauge is published. For best system integration, use the pair where dedicated midrange coverage is desired and confirm all final settings with the equipment documentation or a qualified installer.\u003c\/p\u003e","brand":"STX AUDIO","offers":[{"title":"Default Title","offer_id":45613591363775,"sku":"783501155539","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81IrZGmpSOL.jpg?v=1777934696"},{"product_id":"stx-audio-x65-2r-6-5-midrange-speaker-850-watts-max-power-4-ohm-91-db-sensitivity-black-press-paper-cone-for-car-audio-with-high-capacitor-and-red-grills","title":"STX Audio X65.2R 6.5\" Midrange Speaker","description":"\u003cp\u003eThe STX Audio X65.2R is a 6.5-inch car-audio midrange speaker designed to bring vocal, instrument, and presence frequencies forward in an upgraded sound system. It is intended for listeners building or refreshing a vehicle system that needs dedicated midrange coverage rather than relying solely on factory full-range speakers. Its 4-ohm nominal impedance supports integration into many conventional car-audio speaker and amplifier setups.\u003c\/p\u003e\u003cp\u003eWith a listed maximum power handling of 850 watts and 91 dB sensitivity, the X65.2R is aimed at systems where output and midrange definition are important. The speaker is specified for a 95 Hz to 20 kHz frequency-response range, covering a broad portion of the audible midrange and upper-frequency region. It can be used as part of a multi-speaker arrangement where bass, midrange, and high frequencies are divided among dedicated drivers.\u003c\/p\u003e\u003cp\u003eA black press-paper cone is used for the moving diaphragm, giving the speaker a traditional paper-cone design intended for car-audio use. The X65.2R also includes a high capacitor, described in product information as supporting smoother midrange-frequency output. This makes it a practical option for custom installations that need an added layer of filtering or frequency management at the speaker location.\u003c\/p\u003e\u003cp\u003eThe X65.2R is a passive speaker, so it requires connection to an appropriate amplified speaker output. Its 4-ohm design should be matched with an amplifier or head-unit channel that is rated to operate at 4 ohms. For a balanced system, pair it with correctly selected bass and high-frequency drivers as needed for the intended listening range.\u003c\/p\u003e\u003cp\u003eRed protective grills are included to help shield the speaker face from incidental contact after installation. The black cone and red grill treatment give the speaker a distinctive appearance for visible door-panel, kick-panel, or custom-panel applications. Confirm available mounting space and the rest of the system's crossover strategy before finalizing an installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Midrange Format:\u003c\/strong\u003e Sized for car-audio installations that use dedicated midrange drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e850-Watt Maximum Power:\u003c\/strong\u003e Listed maximum power handling supports higher-output system designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with amplifier channels designed for 4-ohm speaker loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e91 dB Sensitivity:\u003c\/strong\u003e Helps the speaker produce useful output from available amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Press-Paper Cone:\u003c\/strong\u003e Uses a paper-cone diaphragm in a black finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Capacitor and Red Grills:\u003c\/strong\u003e Includes the listed capacitor accessory and protective red grills.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe X65.2R uses a black press-paper cone and is supplied with red protective grills. This combination provides a functional speaker face with added protection for installations where the driver may remain exposed. The product is specified as a passive, dynamic-driver midrange speaker for in-car audio use.\u003c\/p\u003e\u003cp\u003eVerify that the intended location accepts a 6.5-inch speaker and leaves adequate clearance before mounting. Connect the speaker to a compatible 4-ohm amplified channel, observe correct polarity, and use an appropriate crossover or system tuning approach for a dedicated midrange driver. The included grills are useful where the speaker cone needs protection from passengers, cargo, or trim-panel contact.\u003c\/p\u003e","brand":"STX AUDIO","offers":[{"title":"Default Title","offer_id":45613591462079,"sku":"783501155522","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81k-4BU-ajL.jpg?v=1777934714"},{"product_id":"gravity-premium-6-5-speakers-230w-gr-1686h","title":"Gravity GR-1686H 6.5\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Gravity GR-1686H is a pair of 6.5-inch 2-way coaxial car speakers designed to replace worn or basic factory door speakers. It provides a straightforward upgrade path for vehicles that accept 6.5-inch speakers. Its full-range coaxial format combines the woofer and tweeter into each speaker assembly for simplified installation.\u003c\/p\u003e\u003cp\u003eWith 230 watts maximum power handling per pair, the GR-1686H is intended for everyday in-car listening with either a compatible factory radio or an appropriately matched aftermarket system. The 4-ohm impedance supports common automotive speaker applications. Its 90 dB sensitivity rating is specified for efficient output from modest power sources.\u003c\/p\u003e\u003cp\u003eThe speaker uses a Nomex and silk cone woofer construction to support controlled midrange and low-frequency reproduction. A soft-dome tweeter is integrated into the coaxial design to reproduce upper-frequency detail. The specified 60 Hz to 20 kHz frequency response covers the core range of music, speech, and general entertainment playback.\u003c\/p\u003e\u003cp\u003eA 15-ounce magnet and 25 mm voice coil are specified for the GR-1686H. These components form the motor and moving-coil structure that drives the speaker cone. The design is suited to replacement and entry-level custom car-audio installations where space is limited.\u003c\/p\u003e\u003cp\u003eThe GR-1686H is a practical choice for cars, trucks, and SUVs with compatible 6.5-inch speaker locations. It can be used as a direct speaker replacement or as part of a broader system upgrade with a compatible head unit or amplifier. Confirm vehicle mounting dimensions, connector fitment, and available mounting depth before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Format:\u003c\/strong\u003e Combines woofer and tweeter functions in each speaker for a compact full-range replacement solution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Speaker Design:\u003c\/strong\u003e Separates low\/midrange and high-frequency reproduction through dedicated driver elements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e230W Maximum Handling:\u003c\/strong\u003e Provides a stated maximum power capacity of 230 watts per pair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNomex And Silk Cone:\u003c\/strong\u003e Uses the specified cone materials for responsive everyday music playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90 dB Sensitivity:\u003c\/strong\u003e Supports useful output with compatible factory radios and moderate aftermarket power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches the common nominal impedance used by many automotive audio systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GR-1686H uses a 15-ounce magnet and 25 mm voice coil in a compact 6.5-inch speaker platform. Its coaxial layout places the tweeter within the woofer assembly, helping it fit applications where separate component-speaker mounting locations are not available. Spade-style speaker terminals are specified for connection.\u003c\/p\u003e\u003cp\u003eVerify that the vehicle accepts 6.5-inch speakers and confirm mounting depth, cutout diameter, screw locations, and door-panel clearance before purchasing. Use vehicle-specific adapter brackets or wiring harnesses when required, and match the speakers to a compatible 4-ohm radio or amplifier output. Product listings identify a pair of speakers with speaker wire, screws, and a user manual; contents should be checked upon receipt.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":45625092276415,"sku":"700987504699","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61MHu1k21BL.jpg?v=1778538350"},{"product_id":"gravity-2x-mg660-lbh-6-5-inch-2-way-marine-speakers-cea-rated-4-ohms-impedance-frequency-response-80-20-khz-water-resistant-white-total-350-watts-peak-power","title":"Gravity MG660-LBK 6.5\" 2-Way Marine Speakers","description":"\u003cp\u003eThe Gravity MG660-LBK is a pair of 6.5-inch two-way marine speakers designed for audio systems exposed to water, weather, and open-air use. It provides a practical replacement or upgrade option for boats, personal watercraft, and off-road vehicles that use a standard-size speaker location. The pair combines full-range speaker playback with integrated blue LED illumination.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for listeners who want music in marine and outdoor vehicle applications without using conventional interior-only speakers. Their weather-resistant, waterproof-listed construction is made to handle heavy water splashes and outdoor conditions. The 6.5-inch format supports installation in many common OEM-style speaker positions, subject to verifying the actual opening and available mounting clearance.\u003c\/p\u003e\u003cp\u003eThe MG660-LBK uses a two-way speaker layout to cover both lower and higher portions of the audible range from each location. Gravity lists 350 watts of advertised power for the pair, though it does not publish an RMS rating or a power-rating test standard for this model. Match the speakers with a compatible marine or vehicle audio source and avoid relying on an unconfirmed continuous-power figure when selecting an amplifier.\u003c\/p\u003e\u003cp\u003eBuilt-in blue LED lighting adds visual accent lighting around the speaker area for marine and outdoor installations. This makes the speakers suitable for systems where lighting is part of the overall vessel or powersports presentation. The lighting feature should be connected and protected according to the vehicle's electrical system requirements.\u003c\/p\u003e\u003cp\u003eA low-profile design helps the MG660-LBK fit installations where rear-panel space is limited. It can be used as a direct replacement where fitment is confirmed, or as part of a larger system with a marine receiver, external amplifier, and additional speakers. Confirm mounting dimensions, wiring requirements, and speaker impedance before installation because detailed manufacturer installation specifications are not published for this SKU.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Size:\u003c\/strong\u003e Fits many standard marine and vehicle speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Design:\u003c\/strong\u003e Combines full-range playback from each speaker location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof Listing:\u003c\/strong\u003e Intended for wet marine and outdoor environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather Resistance:\u003c\/strong\u003e Built to handle water splashes and outdoor exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue LED Lighting:\u003c\/strong\u003e Adds illuminated styling to compatible installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Form:\u003c\/strong\u003e Helps support installations with limited mounting space.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MG660-LBK is a white marine speaker pair with a slim, low-profile exterior intended for exposed recreational-vehicle environments. Its listed waterproof and weather-resistant characteristics are intended for marine, watercraft, and off-road applications. No IP rating, cone material, grille material, or basket material has been published for the exact UPC-listed product.\u003c\/p\u003e\u003cp\u003eBefore mounting, compare the existing opening, screw pattern, and rear clearance with the actual speakers, since detailed cutout and mounting-depth figures are not published. Connect each speaker with correct positive and negative polarity to a compatible audio system, and plan separate protected wiring as needed for the LED lighting. These speakers are best used in boats, marine watercraft, and off-road vehicles where a 6.5-inch OEM-style replacement size is appropriate.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":45628052078783,"sku":"787446976839","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71VoXaylYdL.jpg?v=1778620316"},{"product_id":"gravity-2x-mg670-lw-6-5-inch-2-way-total-350-watts-peak-power-marine-speakers-cea-rated-frequency-response-80-to-20-khz-uv-protection-and-water-resistant-black","title":"Gravity MG670-LW 6.5\" 2-Way Marine Speakers","description":"\u003cp\u003eThe Gravity MG670-LW is a pair of 6.5-inch 2-way marine speakers designed for boat, watercraft, and outdoor vehicle audio installations. They provide a compact replacement option where conventional vehicle speakers may be exposed to splashes, sun, and changing weather. The black low-profile format is intended for installations that need a standard-size marine speaker.\u003c\/p\u003e\u003cp\u003eThese speakers are suited to users upgrading sound on boats, personal watercraft, and off-road vehicles. Their 4-ohm impedance is compatible with common mobile-audio speaker systems. The pair is listed with a 350-watt maximum power rating, while an RMS rating is not specified in the available product information.\u003c\/p\u003e\u003cp\u003eThe MG670-LW uses a 2-way design to cover a broader range than a single-driver speaker. Available specifications list an 80 Hz to 20 kHz frequency response and 88 dB sensitivity. This gives the speakers a practical full-range role in a marine or outdoor stereo system.\u003c\/p\u003e\u003cp\u003eFor environmental durability, the speakers are described as waterproof and weather resistant, with UV protection also specified for the MG670-LW. Built-in blue LED illumination adds a visible accent around the speaker installation. No IP rating or LED wiring specification is published.\u003c\/p\u003e\u003cp\u003eThe MG670-LW can be used as a direct-size upgrade in installations designed around 6.5-inch speakers, subject to verifying the mounting opening and clearance. Its 60 mm mounting depth and spade-style terminals support straightforward planning before installation. Pair it with a compatible marine-capable stereo or external amplifier and appropriate wiring for the application.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Pair:\u003c\/strong\u003e Includes two matching marine speakers for a stereo installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Design:\u003c\/strong\u003e Supports full-range sound reproduction from each speaker location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather-Resistant Construction:\u003c\/strong\u003e Intended for exposed boat and outdoor vehicle environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue LED Lighting:\u003c\/strong\u003e Integrated illumination adds a visible accent to the installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Fits common mobile and marine speaker-system configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpade Terminals:\u003c\/strong\u003e Provides a simple connection point for speaker wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MG670-LW combines a black low-profile exterior with a plastic outer construction, UV protection, and water-resistant design. It uses a 10-ounce magnet and an anti-resonant stamped basket. The built-in blue LEDs complement marine, watercraft, and off-road installations without changing the speaker's 6.5-inch form factor.\u003c\/p\u003e\u003cp\u003eConfirm that the mounting location accepts a 6.5-inch speaker and provides at least 60 mm of mounting depth before cutting or fastening. Connect speaker leads to the spade terminals and plan LED wiring according to the vehicle's electrical system; LED wiring details are not published. Use the pair with compatible 4-ohm marine audio equipment, and protect all connections appropriately for the installation environment.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":45628053389503,"sku":"787446976808","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71LBI5WFMYS.jpg?v=1778620342"},{"product_id":"gravity-6-5-inch-2-way-car-audio-full-range-speakers-460watts-maximum-power-handling-moisture-resistant-rubber-surround-frequency-response-60hz-20khz-pair-230watts-each","title":"Gravity SGR654 6.5\" 4-Way Full-Range Car Speakers","description":"\u003cp\u003eThe Gravity SGR654 is a pair of 6.5-inch full-range car speakers intended for vehicles that use this common speaker size. Their 4-way design combines multiple sound-producing elements in each speaker to cover a broad portion of the audible range. They are a practical option for replacing worn factory speakers or building an entry-level car-audio system.\u003c\/p\u003e\u003cp\u003eThese speakers are specified with a 60 Hz to 20 kHz frequency response, supporting bass, midrange, and high-frequency content within one coaxial-style assembly. A 92 dB sensitivity specification indicates they are designed to produce useful output without requiring unusually high amplifier power. The 4-ohm impedance suits many conventional car-audio amplifiers and compatible head-unit speaker outputs.\u003c\/p\u003e\u003cp\u003eGravity rates the SGR654 at up to 400 watts maximum per speaker, or 800 watts maximum for the pair. Maximum-power figures are not the same as continuous RMS ratings, so amplifier selection should be based on conservative gain setting and clean, unclipped output. Proper power matching is especially important when using an external amplifier.\u003c\/p\u003e\u003cp\u003eThe speaker uses a moisture-resistant rubber surround and an anti-resonant stamped-steel basket. These construction details are intended to help the assembly tolerate vibration and typical automotive environmental conditions. Spade-style speaker terminals provide a straightforward connection point for vehicle speaker wiring.\u003c\/p\u003e\u003cp\u003eWith a listed mounting depth of 2-7\/8 inches, the SGR654 should be measured against the available clearance behind the intended mounting location before installation. It can be used as a pair for front or rear speaker replacement where fitment permits. For a more complete system, it can be paired with a compatible amplifier, wiring, and a separate subwoofer if additional low-bass output is desired.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Speaker Size:\u003c\/strong\u003e Fits applications designed for 6.5-inch speakers when mounting clearance permits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Way Full-Range Design:\u003c\/strong\u003e Uses a multi-element design to reproduce a broad frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e800-Watt Pair Maximum:\u003c\/strong\u003e The pair is specified for up to 800 watts maximum power handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with many compatible car stereo and amplifier speaker outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoisture-Resistant Rubber Surround:\u003c\/strong\u003e Helps support durability in automotive listening environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Provides a rigid mounting structure intended to limit unwanted resonance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe SGR654 combines a stamped-steel basket with a moisture-resistant rubber surround and a 2-3\/8-inch voice coil specification. Its listed magnet size is 3-1\/8 inches, and the speaker is specified at 92 dB sensitivity. The compact full-range format keeps the sound-producing elements together in a single 6.5-inch speaker assembly.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 6.5-inch speaker and has at least 2-7\/8 inches of mounting-depth clearance before purchase. Connect the speakers with correct polarity using the spade terminals, secure them with suitable vehicle-specific hardware, and set amplifier gain carefully to avoid distortion. Mounting adapters, harness adapters, wiring, and other installation parts may be required depending on the vehicle.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":45628075245759,"sku":"700987502183","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/1_d11b70d8-f432-4a47-9a0c-1a90728d6cca.jpg?v=1783038749"},{"product_id":"audio360-ad6525m-ultra-6-5-midrange-speaker-650w-max-power-325w-rms-dual-voice-coil-press-paper-cone-ideal-for-car-audio-systems","title":"AUDIO360 ADS6525M 6.5\" Dual Voice Coil Midrange Speaker","description":"\u003cp\u003eThe AUDIO360 ADS6525M is a 6.5-inch car-audio midrange speaker designed to bring vocal and instrumental detail into a custom vehicle sound system. It is intended for listeners building or upgrading systems that need dedicated midrange output rather than a full-range replacement speaker. Its compact 6.5-inch format supports use in many door-panel and custom-pod applications where a focused midrange driver is desired.\u003c\/p\u003e\u003cp\u003eWith 325 watts RMS power handling and 650 watts maximum power handling, the ADS6525M is made for amplified car-audio setups with appropriate power matching. The driver is positioned for clear, assertive midrange reproduction at higher listening levels. Matching amplifier output carefully to the RMS rating is the practical way to use its stated power capability.\u003c\/p\u003e\u003cp\u003eA dual voice coil design with a stated 4-ohm configuration provides wiring flexibility when planning a multi-speaker installation. This can be useful in systems where the amplifier, speaker count, and final load need to be considered together. Confirm the final wiring load with the amplifier manufacturer before installation.\u003c\/p\u003e\u003cp\u003eThe speaker uses a black press-paper cone and cloth-edge suspension. This combination is specified to keep the moving assembly lightweight while supporting controlled midrange reproduction. An oversized motor structure is also part of the driver design for its intended high-output car-audio role.\u003c\/p\u003e\u003cp\u003eA robust steel basket provides the mounting structure for the ADS6525M. The speaker is suited to door panels, custom speaker pods, and performance-oriented car-audio builds where a dedicated midrange driver is part of the system plan. Because it is a midrange speaker, system design should account for the other drivers and crossover strategy needed for the desired overall frequency coverage.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e325W RMS Handling:\u003c\/strong\u003e Supports use with a suitably matched amplified system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e650W Maximum Power:\u003c\/strong\u003e Provides a stated short-term maximum power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Midrange Format:\u003c\/strong\u003e Fits applications designed for a 6.5-inch driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Voice Coil Design:\u003c\/strong\u003e Offers flexibility when planning speaker wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress-Paper Cone:\u003c\/strong\u003e Uses a lightweight black paper-cone construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel Basket Structure:\u003c\/strong\u003e Provides a robust frame for mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ADS6525M combines a black press-paper cone, cloth-edge suspension, oversized motor structure, and steel basket. These confirmed construction elements support its role as a dedicated midrange driver in a vehicle audio system. The speaker is finished in black.\u003c\/p\u003e\u003cp\u003eVerify vehicle mounting clearance, mounting-hole dimensions, and electrical compatibility before ordering, as cutout and mounting-depth measurements are not confirmed. The speaker is described for door panels, custom pods, and competition-oriented systems; use wiring appropriate for its dual voice coil configuration and confirm the final impedance load against the amplifier's specifications. For a balanced system, plan the remaining frequency ranges with compatible drivers and suitable crossover settings.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":45692202975423,"sku":"783501184409","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71cC_WIyWzL.jpg?v=1780693937"},{"product_id":"crunch-cs653","title":"Crunch CS653 6.5\" 3-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Crunch CS653 is a pair of 6.5-inch, 3-way coaxial car speakers designed to replace worn or limited factory speakers. Their all-in-one coaxial layout places the high-frequency element within the speaker assembly, helping simplify an everyday door or rear-deck audio upgrade. They are intended for universal vehicle applications, subject to confirming physical fitment in the vehicle.\u003c\/p\u003e\u003cp\u003eWith a published 4-ohm impedance, the CS653 is suited to common automotive speaker circuits. Crunch lists 150 watts RMS and 300 watts peak power handling for this model. The speaker uses a 1-inch Neo-Mylar soft-dome tweeter to reproduce upper-frequency detail alongside its 6.5-inch main driver.\u003c\/p\u003e\u003cp\u003eThe Silver Alpha-Cellulose Poly cone is designed to provide the midrange and mid-bass foundation of the speaker. A UV-resistant rubber surround supports cone movement and is paired with high-temperature adhesive at the cone-surround connection. This combination is intended for the temperature changes and vibration common in vehicle interiors.\u003c\/p\u003e\u003cp\u003eCrunch equips the CS653 with a pure-copper voice coil on a Kapton former, plus an over-coil ventilation arrangement through the spider. The design also uses an epoxy-infused natural-fiber spider for suspension support. A passive internal crossover directs frequencies between the main driver and tweeter elements.\u003c\/p\u003e\u003cp\u003eThese speakers can serve as a practical front- or rear-location upgrade in a factory-replacement system, or as part of a larger system with an appropriate amplifier. Check the vehicle's mounting opening, available depth, and panel clearance before installation. Grilles are included for installations where the speakers are not protected by an existing vehicle panel.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Combines multiple driver elements in each speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Size:\u003c\/strong\u003e Fits many common door and rear-deck locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeo-Mylar Tweeter:\u003c\/strong\u003e Uses a 1-inch soft-dome high-frequency driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlpha-Cellulose Poly Cone:\u003c\/strong\u003e Supports midrange and mid-bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Rubber Surround:\u003c\/strong\u003e Helps support long-term cone movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Internal Crossover:\u003c\/strong\u003e Separates frequencies within the coaxial speaker assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CS653 uses an anti-resonant stamped-steel basket, ferrite magnet motor, textured ABS gasket, and a black finish. Its pure-copper voice coil uses a Kapton former, while the tweeter also uses a Kapton-based construction. The included grilles can help protect exposed speakers from accidental contact.\u003c\/p\u003e\u003cp\u003eConfirm a 5.59-inch cutout, 7.01-inch outside diameter, and 2.13-inch mounting-depth clearance before ordering. Use the supplied speaker connection cables or connect with suitable spade terminals or direct soldering, observing vehicle polarity. Mounting hardware, grilles, and connection cables are included; vehicle-specific adapters or wiring harnesses may be needed depending on the installation location.\u003c\/p\u003e","brand":"CRUNCH","offers":[{"title":"Default Title","offer_id":45760006488255,"sku":"CS653","price":19.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/814IuFVojgL.jpg?v=1782105011"},{"product_id":"kenwood-kfc-1673mrwl","title":"Kenwood KFC-1673MRWL 6.5\" 2-Way Marine Speakers","description":"\u003cp\u003eThe Kenwood KFC-1673MRWL is a pair of 6.5-inch, 2-way coaxial marine speakers with integrated RGB illumination and white grilles. They are designed for boat and motorsports installations where conventional interior speakers may be exposed to moisture and sunlight. The pair combines full-range audio reproduction with configurable lighting controlled by an included RF remote.\u003c\/p\u003e\u003cp\u003eWith a 75-watt RMS rating, 260-watt peak input rating, and 4-ohm impedance, these speakers are suited to appropriately matched marine or vehicle audio systems. Their specified 65 Hz to 21 kHz frequency response supports bass, midrange, and high-frequency content from a compact coaxial design. An 86 dB sensitivity rating provides a defined reference for amplifier matching and system planning.\u003c\/p\u003e\u003cp\u003eThe speaker uses a 6.5-inch water-resistant PP mica woofer cone, a rubber surround, and a 1\/2-inch PEI balanced-dome tweeter. The woofer uses a ferrite magnet, while the tweeter uses a neodymium magnet. A rubber frame cushion is used to help limit water intrusion from the rear side of the woofer.\u003c\/p\u003e\u003cp\u003eFor marine-facing durability, the mounted speaker is rated IPX5, and the white grille and cone are UV resistant. Kenwood also specifies a water-resistant coating on the LED circuit board. These measures make the KFC-1673MRWL appropriate for exposed audio locations when installed according to the supplied instructions.\u003c\/p\u003e\u003cp\u003eIntegrated RGB LEDs provide 21 static colors and 21 dynamic lighting modes, with eight brightness settings and seven speed settings. The included RF remote controls illumination functions, and up to six pairs can be linked and synchronized. This makes the speakers a practical choice for adding coordinated audio and accent lighting to a marine or powersports system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Power:\u003c\/strong\u003e Supports amplifier matching for sustained listening levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX5 Water Resistance:\u003c\/strong\u003e Helps protect the mounted speakers from water exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB LED Lighting:\u003c\/strong\u003e Adds selectable static colors and dynamic illumination effects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF Remote Control:\u003c\/strong\u003e Adjusts lighting color, mode, brightness, speed, and standby.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant White Grilles:\u003c\/strong\u003e Helps the visible speaker surfaces withstand sun exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinkable Lighting System:\u003c\/strong\u003e Synchronizes illumination across up to six speaker pairs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-1673MRWL uses a PP mica woofer cone, rubber surround, ABS resin-molded basket, rubber frame cushion, PEI balanced-dome tweeter, and white UV-resistant grille. The speaker pair is built around a 6.5-inch coaxial format, placing the tweeter with the woofer for a compact installation. Its installed dimensions include a 5-11\/16-inch cutout requirement and 2-9\/16-inch mounting depth.\u003c\/p\u003e\u003cp\u003eUse separate speaker wiring for each channel and match the pair with a compatible 4-ohm audio system. Speaker wire is not included; Kenwood recommends 12- to 22-AWG speaker cable terminated with female spade connectors. The LED controller requires 12V DC power and ground; when wired directly to a battery, install a 3A fuse within 90 mm (3-9\/16 inches) of the battery, and use the supplied link cable and heat-shrink tubes to connect and protect the lighting system.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":45766406340799,"sku":"KFC-1673MRWL","price":90.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61UW_fhABgL.jpg?v=1782245950"},{"product_id":"kenwood-kfc-1673mrbl","title":"Kenwood KFC-1673MRBL 6.5\" RGB Marine Speakers","description":"\u003cp\u003eThe Kenwood KFC-1673MRBL is a pair of 6.5-inch, 2-way coaxial marine and motorsports speakers with black grilles and integrated RGB illumination. It is designed for boat, UTV, ATV, and vehicle installations where conventional speakers may be exposed to moisture, sunlight, and outdoor conditions. The built-in lighting adds adjustable visual accenting without requiring separate illuminated speaker rings.\u003c\/p\u003e\u003cp\u003eThese speakers use a water-resistant polypropylene mica woofer cone and a 1\/2-inch PEI balanced-dome tweeter to cover bass, midrange, and treble from a single coaxial assembly. With a 65 Hz to 21 kHz frequency response and 86 dB sensitivity, they are suited to full-range outdoor audio systems. Each pair is rated for 75 watts RMS and 260 watts peak power handling.\u003c\/p\u003e\u003cp\u003eThe KFC-1673MRBL uses an RF wireless remote to control its RGB lighting system. It provides 21 selectable colors, 21 lighting modes, eight brightness steps, and seven speed steps for dynamic effects. The lighting system also includes a last-memory function that recalls its prior operating state after it is turned on.\u003c\/p\u003e\u003cp\u003eMarine-oriented construction includes IPX5 water resistance for the mounted speaker, UV-resistant grilles and cone, a rubber surround, a rubber frame cushion, and stainless-steel mounting hardware. The speaker basket is resin-molded ABS, while the woofer uses a ferrite magnet and the tweeter uses a neodymium magnet. A water-resistant cushion helps reduce water intrusion from the rear side of the woofer.\u003c\/p\u003e\u003cp\u003eThe speakers can be used as a direct replacement where a compatible 6.5-inch mounting location is available, or as part of a new marine or powersports audio system. Their 4-ohm impedance makes them compatible with appropriately matched 4-ohm speaker outputs or amplifier channels. Up to six pairs can be linked and synchronized for coordinated RGB lighting across a larger installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated RGB Lighting:\u003c\/strong\u003e Adjust 21 colors and 21 lighting modes with the included RF remote.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Power Handling:\u003c\/strong\u003e Supports amplifier or receiver power matched to 75 watts RMS per pair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX5 Water Resistance:\u003c\/strong\u003e Helps the mounted speakers withstand water exposure in marine-oriented installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Combines a 6.5-inch woofer and 1\/2-inch balanced-dome tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Components:\u003c\/strong\u003e UV-resistant grille and cone support outdoor installation use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinkable Lighting System:\u003c\/strong\u003e Synchronizes RGB illumination across up to six speaker pairs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-1673MRBL features black fixed grilles, a resin-molded ABS basket, a PP mica woofer cone, rubber surround, and a PEI balanced-dome tweeter. Its hardware includes SUS304 stainless-steel screws and mounting clips, while the LED circuit board has a water-resistant coating. The tweeter is integrated into the grille assembly rather than mounted on a pole piece through the woofer cone.\u003c\/p\u003e\u003cp\u003eVerify a 5-11\/16-inch circular cutout and at least 2-9\/16 inches of mounting depth before installation. Speaker wire is not included; Kenwood recommends 12-22 AWG speaker wire terminated with female spade connectors. The RGB controller requires a 12V DC boat or vehicle electrical system, and a 3A fuse is required when its positive lead is connected directly to the battery.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":45766407946431,"sku":"KFC-1673MRBL","price":103.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71oEEuETlPL.jpg?v=1782245978"},{"product_id":"kenwood-kfc-1613mrw","title":"Kenwood KFC-1613MRW 6.5\" Marine\/Motorsports Speakers","description":"\u003cp\u003eThe Kenwood KFC-1613MRW is a pair of 6.5-inch, 2-way coaxial speakers made for marine and motorsports audio systems. It provides a practical replacement or upgrade for boats, ATVs, UTVs, golf carts, and similar applications where conventional interior car speakers may not be appropriate. The white grille version is designed to suit installations where a light-colored finish is preferred.\u003c\/p\u003e\u003cp\u003eThese speakers use a 4-ohm design that can be connected to a compatible marine receiver, Bluetooth amplifier, or aftermarket car audio amplifier. With a rated input power of 30 watts and 87 dB sensitivity, they are suited to moderate-power audio systems. Their 60 Hz to 20 kHz frequency response supports full-range playback with bass, vocals, and high-frequency detail from a compact coaxial speaker.\u003c\/p\u003e\u003cp\u003eA water-resistant polypropylene woofer cone and rubber surround help the KFC-1613MRW handle exposure to rain, splash, and outdoor conditions. The balanced-dome tweeter is also water resistant, providing integrated high-frequency reproduction without requiring separate tweeter mounting. UV-resistant grilles help protect the speaker face in sun-exposed installations.\u003c\/p\u003e\u003cp\u003eThe 2-way coaxial configuration places the tweeter within the woofer assembly, helping simplify installation where space is limited. This layout is useful for replacing existing 6.5-inch marine or powersports speakers while retaining a clean, flush-mounted appearance. The speaker pair uses fixed white grilles for a finished installation.\u003c\/p\u003e\u003cp\u003eFor system building, the KFC-1613MRW can be used with a compatible 4-ohm marine receiver or amplifier. Its 5-inch cutout requirement and shallow 2-5\/16-inch mounting depth should be checked against the mounting surface and available clearance before installation. The pair includes hardware for mounting, making it suitable for new installations or direct speaker replacement projects.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch 2-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter output in one compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible marine, motorsports, and car audio amplifiers or receivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Resistant PP Cone:\u003c\/strong\u003e Polypropylene woofer construction is suited to exposed outdoor applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber Surround:\u003c\/strong\u003e Supports cone movement while adding durability in changing conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced-Dome Tweeter:\u003c\/strong\u003e Provides integrated high-frequency reproduction without a separate tweeter mount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant White Grille:\u003c\/strong\u003e Helps protect the speaker face in sun-exposed installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-1613MRW uses a water-resistant polypropylene cone, rubber surround, water-resistant balanced-dome tweeter, and UV-resistant fixed white grille. These materials are selected for marine and motorsports environments where speakers may encounter sun, moisture, splash, and dust. The coaxial layout keeps the speaker assembly compact while integrating low- and high-frequency drivers.\u003c\/p\u003e\u003cp\u003eConfirm a 5-inch cutout and at least 2-5\/16 inches of mounting clearance before cutting or mounting. Connect each speaker to a compatible 4-ohm speaker output, observe amplifier or receiver power limits, and use the included stainless-steel screws and speed clips where appropriate. For exposed installations, route and secure speaker wiring to reduce strain and protect connections from moisture.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":45766408110271,"sku":"KFC-1613MRW","price":31.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61-U_M9eA-S.jpg?v=1782245979"},{"product_id":"kenwood-kfc-1613mrb","title":"Kenwood KFC-1613MRB 6.5\" Marine\/Motorsports Speakers","description":"\u003cp\u003eThe Kenwood KFC-1613MRB is a pair of 6.5-inch 2-way coaxial speakers designed for marine and motorsports audio systems. It provides a practical upgrade for boats, ATVs, UTVs, golf carts, motorcycles, and other open-air installations where conventional car speakers may not be suitable. Its 4-ohm impedance allows connection to compatible marine receivers, powersports source units, or external amplifiers.\u003c\/p\u003e\u003cp\u003eThese speakers use a water-resistant polypropylene woofer cone and water-resistant balanced-dome tweeter to support outdoor listening in demanding environments. A rubber surround helps the woofer remain flexible and durable during regular use. The UV-resistant grille is intended to help protect the speaker assembly from sun exposure.\u003c\/p\u003e\u003cp\u003eThe KFC-1613MRB is rated for 30 watts RMS input power and 100 watts peak input power. Its 87 dB sensitivity and 60 Hz to 20 kHz frequency response make it suitable for clear full-range playback in compact outdoor audio systems. For best results, match the speakers with a clean, appropriately powered 4-ohm amplifier or receiver channel.\u003c\/p\u003e\u003cp\u003eIts coaxial 2-way design combines the woofer and tweeter into one round speaker assembly, simplifying installation where space is limited. The balanced-dome tweeter is mounted separately from the woofer cone, supporting high-frequency reproduction while maintaining the speaker's weather-resistant construction. This design is useful for replacing existing 6.5-inch marine or powersports speakers with a similar mounting format.\u003c\/p\u003e\u003cp\u003eThe pair is designed for flush mounting with a 5-inch cutout and a 2-5\/16-inch mounting depth. Stainless mounting hardware and speed clips are included for installation. Before purchasing, confirm available panel depth, cutout size, mounting-hole alignment, and the speaker color associated with the exact SKU being ordered.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30W RMS Rating:\u003c\/strong\u003e Matches compatible low- to moderate-power audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Peak Input:\u003c\/strong\u003e Supports short musical peaks during playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Resistant Drivers:\u003c\/strong\u003e Helps suit marine and motorsports applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Grille:\u003c\/strong\u003e Helps protect the visible speaker surface outdoors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with many marine receivers and amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-1613MRB uses a water-resistant polypropylene cone, rubber surround, balanced-dome tweeter, and UV-resistant grille. These materials are selected for installations exposed to outdoor conditions, including sunlight and moisture. The fixed-grille coaxial layout keeps the tweeter integrated within the speaker assembly.\u003c\/p\u003e\u003cp\u003ePlan for a 5-inch cutout and at least 2-5\/16 inches of mounting depth behind the panel. Connect each speaker to a compatible amplifier or receiver output, observing positive and negative terminal polarity. The package includes twelve 4 x 25 mm mounting screws and twelve speed clips for installations that can use the supplied hardware.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":45766408536255,"sku":"KFC-1613MRB","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/51uzQ9X0KfS.jpg?v=1782245987"},{"product_id":"kenwood-kfc-1666s","title":"Kenwood KFC-1666S 6.5\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Kenwood KFC-1666S is a pair of 6.5-inch, 2-way coaxial car speakers designed as a practical replacement or upgrade for compatible factory speaker locations. Its 4-ohm design and 30-watt RMS rating suit many standard car-audio systems. The speakers combine a woofer and tweeter in each assembly for full-range playback from a compact mounting footprint.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for drivers replacing worn, damaged, or limited factory door or rear-deck speakers. A 90 dB sensitivity rating helps them work efficiently with compatible factory radios or aftermarket head units. Their 40 Hz to 22 kHz frequency response covers bass, midrange, and high-frequency content within a single coaxial design.\u003c\/p\u003e\u003cp\u003eThe KFC-1666S uses a 160 mm polypropylene woofer diaphragm with a cloth surround. This construction is paired with Kenwood's Sound Field Enhancer and enlarged magnet circuit design. A 25 mm balanced-dome tweeter handles upper-frequency detail above the woofer.\u003c\/p\u003e\u003cp\u003eEach speaker is rated for 30 watts RMS input power and 300 watts peak input power. This makes the pair appropriate for modest-power speaker replacement systems and carefully matched amplification. For dependable operation, match the speakers with a compatible 4-ohm audio source and avoid exceeding their rated RMS power handling.\u003c\/p\u003e\u003cp\u003eWith a 4-7\/8-inch cutout requirement and 1-11\/16-inch mounting depth, the KFC-1666S can fit many vehicles that accept 6.5-inch speakers, subject to vehicle-specific clearance and mounting provisions. Grilles and installation hardware are supplied for custom or exposed installations. The speakers can be used as part of a basic factory-speaker refresh or alongside an upgraded receiver and properly matched amplifier.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30W RMS Power Handling:\u003c\/strong\u003e Supports compatible factory or modest aftermarket power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W Peak Power:\u003c\/strong\u003e Handles short musical peaks within rated operating conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer:\u003c\/strong\u003e Uses a PP diaphragm with a cloth surround.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced-Dome Tweeter:\u003c\/strong\u003e Provides dedicated high-frequency reproduction from a 1-inch driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Installation Hardware:\u003c\/strong\u003e Includes grilles, screws, speed nuts, and speaker cords.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-1666S features a silver polypropylene woofer diaphragm, cloth surround, ferrite woofer magnet, and silver balanced-dome tweeter with a neodymium magnet. Its shallow 5\/16-inch tweeter height and 1-11\/16-inch mounting depth are designed to support installation in a range of compatible locations. Grilles are included for added driver protection where appropriate.\u003c\/p\u003e\u003cp\u003eConfirm your vehicle's speaker opening, mounting depth, mounting-hole pattern, and panel clearance before installation. The specified cutout diameter is 4-7\/8 inches, while the speaker measures 6-5\/16 inches across without its grille. Use the supplied screws, speed nuts, and speaker cords as applicable, and connect to a compatible 4-ohm channel with power matched to the 30-watt RMS rating.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":45766410862783,"sku":"KFC-1666S","price":31.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71pL1rm9MnL.jpg?v=1782246018"},{"product_id":"kenwood-kfc-1633mrw","title":"Kenwood KFC-1633MRW 6.5\" 2-Way Marine Speakers","description":"\u003cp\u003eThe Kenwood KFC-1633MRW is a pair of 6.5-inch, 2-way marine speakers designed for boat and watercraft audio systems. They provide a practical replacement or upgrade path for worn, low-output, or non-marine-rated factory speakers. Their 4-ohm design allows connection to compatible marine receivers or external amplifiers.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for listeners who want clear full-range music reproduction in open-air marine environments. A polypropylene woofer handles the main midrange and lower-frequency duties, while the balanced-dome tweeter supports upper-frequency detail. The result is a straightforward two-way speaker design for everyday on-water listening.\u003c\/p\u003e\u003cp\u003eThe KFC-1633MRW is rated for 20 watts RMS and 100 watts peak power per speaker. Its 84 dB sensitivity and 65 Hz to 20 kHz frequency response describe a speaker suited to moderate-power marine audio systems. Match amplification to the continuous RMS rating rather than the peak-power figure when planning a system.\u003c\/p\u003e\u003cp\u003eKenwood uses a water-resistant polypropylene cone woofer in this model to support use around splashing water and marine conditions. The speaker also uses a balanced-dome tweeter and a fixed white grille. These construction details make it appropriate for installations where exposed speaker locations are common.\u003c\/p\u003e\u003cp\u003eWith a 130 mm cutout requirement and 55.9 mm mounting depth, the KFC-1633MRW can fit many standard 6.5-inch speaker locations when mounting measurements are confirmed first. It can be used as a pair on its own or combined with additional marine speakers and a compatible amplifier. The included mounting hardware and installation template help support a clean installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Two-Way Design:\u003c\/strong\u003e Combines a woofer and tweeter in each speaker for full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20W RMS Power:\u003c\/strong\u003e Supports continuous operation with appropriately matched marine audio equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Peak Power:\u003c\/strong\u003e Handles short musical peaks within its specified maximum rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Resistant PP Cone:\u003c\/strong\u003e Uses a polypropylene woofer cone suited to marine speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced-Dome Tweeter:\u003c\/strong\u003e Adds high-frequency reproduction from a 1-inch tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible 4-ohm marine receiver or amplifier channels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-1633MRW uses a 160 mm polypropylene cone woofer, a 25 mm balanced-dome tweeter, and a 227 g magnet. Each speaker is protected by a fixed white grille. The pair has a listed net weight of 1.2 kg with grilles.\u003c\/p\u003e\u003cp\u003eVerify the available mounting depth, cutout diameter, and screw-hole layout before installation. Kenwood specifies a 130 mm cutout, 55.9 mm mounting depth, and four 4 to 4.5 mm mounting holes per speaker. Connect each speaker to a compatible amplifier or receiver output with correct polarity, and use the supplied screws and speed clips where appropriate.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":45766410961087,"sku":"KFC-1633MRW","price":48.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/510HZvT-PbS.jpg?v=1782246020"},{"product_id":"kenwood-kfc-1653mrw","title":"Kenwood KFC-1653MRW 6.5\" 2-Way Marine Speakers","description":"\u003cp\u003eThe Kenwood KFC-1653MRW is a pair of 6.5-inch, 2-way marine speakers made for flush-mount audio installations in boats, outdoor vehicles, and other moisture-prone environments. They provide a practical replacement or upgrade for worn factory speakers where conventional car-audio drivers may not be appropriate. The white finish is designed to complement common marine interiors and exterior panels.\u003c\/p\u003e\u003cp\u003eEach speaker combines a water-resistant polypropylene woofer cone with a 1-inch balanced-dome tweeter. This coaxial arrangement places the high-frequency driver within the woofer assembly, helping deliver full-range playback from a single mounting location. Its 60 Hz to 20 kHz frequency response covers bass, vocals, and treble for general-purpose marine listening.\u003c\/p\u003e\u003cp\u003eThe KFC-1653MRW is rated for 50 watts RMS and 150 watts peak power handling at 4 ohms. That makes it suitable for connection to a compatible marine receiver or a properly matched external amplifier. With 86 dB sensitivity at 1 meter, it is intended for systems that prioritize straightforward, balanced sound in open-air environments.\u003c\/p\u003e\u003cp\u003eKenwood uses a Santoprene surround, resin-mold basket, ferrite magnets, and a UV-resistant grille as part of the speaker construction. The polypropylene woofer cone is intended to better tolerate damp conditions than untreated paper-cone designs. A 25 mm PEI balanced-dome tweeter handles upper-frequency detail.\u003c\/p\u003e\u003cp\u003eThese speakers fit naturally into a marine or powersports audio upgrade that needs a conventional 6.5-inch speaker format. They can be used as a pair in cockpit panels, cabin locations, or compatible outdoor vehicle enclosures. Check available panel clearance, cutout size, mounting depth, and amplifier compatibility before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch 2-Way Design:\u003c\/strong\u003e Combines woofer and tweeter performance in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Resistant PP Woofer:\u003c\/strong\u003e Polypropylene cone supports use in damp outdoor environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Balanced-Dome Tweeter:\u003c\/strong\u003e Helps reproduce clear high-frequency information.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS Power Handling:\u003c\/strong\u003e Matches compatible marine receivers and modest amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Grille:\u003c\/strong\u003e Adds protection for exposed marine mounting locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with many compatible marine audio systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-1653MRW uses a white resin-mold basket and grille, a water-resistant polypropylene woofer cone, and a Santoprene surround. Its woofer and tweeter use ferrite magnets, while the tweeter employs a PEI balanced-dome diaphragm. The system is designed for marine-quality use and for outdoor or moist conditions.\u003c\/p\u003e\u003cp\u003eVerify that the mounting surface accepts a 5-1\/8-inch cutout and provides at least 2-7\/16 inches of mounting depth. The package includes twelve 4 x 30 mm pan-head tapping screws and twelve speed nuts for mounting. Use compatible speaker wiring and a 4-ohm-rated marine receiver or amplifier, and keep wiring connections protected from moisture.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":45766411092159,"sku":"KFC-1653MRW","price":77.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61gTt0DVMML.jpg?v=1782246022"},{"product_id":"kenwood-kfc-1698rs","title":"Kenwood KFC-1698RS 6.5\" 2-Way Car Speakers","description":"\u003cp\u003eThe Kenwood KFC-1698RS is a pair of 6-1\/2-inch round, 2-way car speakers designed for replacing worn factory door or rear-deck speakers. They combine a polypropylene woofer and balanced-dome tweeter in a coaxial layout, helping simplify an audio-system refresh. With a 4-ohm impedance and 88 dB sensitivity, they are suited to compatible factory or aftermarket car-audio systems.\u003c\/p\u003e\u003cp\u003eThese speakers are rated for 100 watts RMS power under CTA-2031 and 350 watts peak input power. Their 76 Hz to 18 kHz frequency response covers much of the bass, midrange, and treble range used in everyday music listening. The 6-1\/2-inch woofer supports a direct-replacement-style upgrade where the vehicle has suitable mounting space.\u003c\/p\u003e\u003cp\u003eThe woofer uses a black polypropylene cone with Kenwood's Diamond Array Pattern and a rubber surround. This construction is intended to support controlled cone movement while the rubber surround provides a durable connection between the cone and basket. A steel basket and black-painted steel top plate and yoke complete the speaker structure.\u003c\/p\u003e\u003cp\u003eA 1-3\/16-inch balanced-dome tweeter handles upper-frequency reproduction. Kenwood's Acoustic Sound Harmonizer uses the tweeter-panel openings to control woofer sound waves for smoother response, while the Sound Field Enhancer is designed to widen the sound field at frequencies above 5 kHz. The low tweeter profile is also designed to assist fitment in many factory speaker locations.\u003c\/p\u003e\u003cp\u003eThe KFC-1698RS can be used as a practical step up from basic factory speakers in a compatible 6-1\/2-inch location. Its 4-7\/8-inch cutout requirement and 1-7\/8-inch mounting depth should be checked against the vehicle before installation. Grilles, mounting hardware, speaker cords, adhesive tape, and a warranty card are included for installation support.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter functions in each speaker location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W RMS Power:\u003c\/strong\u003e CTA-2031-compliant continuous power rating for amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiamond Array Woofer:\u003c\/strong\u003e Polypropylene cone design helps reduce distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber Surround:\u003c\/strong\u003e Supports cone movement and long-term durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic Sound Harmonizer:\u003c\/strong\u003e Controls woofer sound waves through the tweeter panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound Field Enhancer:\u003c\/strong\u003e Expands the perceived sound field above 5 kHz.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-1698RS uses a 160 mm polypropylene woofer cone, rubber surround, steel basket, ferrite woofer magnet, and neodymium tweeter magnet. Its black-painted steel top plate and yoke are designed to release heat efficiently within the magnetic circuit. The optimized woofer damper shape incorporates stress-leveling points for durability and smoother response.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 4-7\/8-inch circular cutout and provides at least 1-7\/8 inches of mounting depth before purchase. The speaker's overall dimensions differ depending on whether the supplied grille is used, so check panel clearance as well as mounting depth. Use the included screws, speed nuts, speaker cords, and adhesive tape as appropriate, and match the speakers with a compatible 4-ohm audio system.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":45766412501183,"sku":"KFC-1698RS","price":56.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81_vVxLLdGL.jpg?v=1782246041"},{"product_id":"kenwood-kfc-p710ps","title":"Kenwood KFC-P710PS 6.5\" Component Speaker System","description":"\u003cp\u003eThe Kenwood KFC-P710PS is a 6-1\/2-inch component speaker system designed for vehicle audio upgrades that separate woofer and tweeter placement. It uses oversized 160 mm woofers alongside separate 1-inch tweeters and supplied in-line passive networks. This layout gives installers flexibility to position high-frequency drivers closer to the listening area while retaining dedicated woofers in the doors or other suitable locations.\u003c\/p\u003e\u003cp\u003eWith 80 watts RMS power handling and a 4-ohm nominal impedance, this set is suited to compatible aftermarket amplification or a properly matched factory-system upgrade. Its 280-watt peak power rating provides an additional short-term handling reference. The 86 dB sensitivity specification and 63 Hz to 24 kHz frequency response describe its operating range and efficiency rating.\u003c\/p\u003e\u003cp\u003eThe woofer uses an injection polypropylene cone with Kenwood's Diamond Array Pattern diaphragm design. A rubber surround, black steel basket, and ferrite woofer magnet support the driver assembly. The separate 25 mm soft-dome tweeter uses a neodymium magnet.\u003c\/p\u003e\u003cp\u003eA 4,900 Hz crossover frequency divides the signal between the woofer and tweeter through the included passive network. Using the supplied network is required by the installation instructions. This makes the KFC-P710PS a practical choice for a two-way component front-stage installation where separate tweeter mounting is desired.\u003c\/p\u003e\u003cp\u003eFitment should be confirmed before purchase, especially in vehicles with limited door-panel or window-clearance space. The woofer requires a 4-15\/16-inch cutout and 2-3\/16-inch mounting depth. Supplied grilles and multiple tweeter mounting accessories support custom, flush, free, and certain GM-style installation approaches.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6-1\/2-Inch Component System:\u003c\/strong\u003e Separate woofers and tweeters allow more flexible speaker placement than a coaxial design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80W RMS Handling:\u003c\/strong\u003e Supports amplifier matching up to the manufacturer's CEA-rated continuous power specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInjection PP Woofer Cone:\u003c\/strong\u003e The polypropylene woofer diaphragm is paired with a rubber surround and steel basket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Soft-Dome Tweeter:\u003c\/strong\u003e A separate 25 mm tweeter is included for high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive In-Line Networks:\u003c\/strong\u003e Included crossover networks direct the appropriate frequency range to each driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Tweeter Mounts:\u003c\/strong\u003e Flush, free, and GM mounting accessories provide installation options.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-P710PS combines an injection polypropylene woofer cone, rubber surround, black steel basket, and ferrite woofer magnet. Its 1-inch soft-dome tweeter uses a neodymium magnet. The woofer has an oversized 160 mm frame size, while the included grilles provide a finished appearance where exposed mounting is appropriate.\u003c\/p\u003e\u003cp\u003eConfirm the 4-15\/16-inch cutout diameter, 2-3\/16-inch mounting depth, and clearance behind the mounting surface before installation. Speaker wire is not supplied; Kenwood recommends 12-22 AWG speaker wire terminated with female spade connectors. Connect the woofer and tweeter through the supplied passive crossover network, and use the included mounting hardware and tweeter brackets as appropriate for the vehicle.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":45766487441599,"sku":"KFC-P710PS","price":77.68,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/91MjlxJkeGL_7f070f7c-6b80-4168-bc8a-5ba29016a216.jpg?v=1782247704"},{"product_id":"rockford-fosgate-p1v2-65","title":"Rockford Fosgate P1V2-65 6.5\" 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Rockford Fosgate P1V2-65 is a pair of 6.5-inch, 4-ohm 3-way coaxial car speakers designed to replace factory full-range drivers in compatible door or rear-deck locations. By integrating a midrange, inverted-dome tweeter, and piezo super tweeter into each speaker, it provides a more complete frequency range than a typical single-cone OEM speaker. It is intended for everyday vehicle audio upgrades where improved clarity and output are desired without moving to a separate component-speaker system.\u003c\/p\u003e\u003cp\u003eEach P1V2-65 speaker is rated for 75 watts RMS and 150 watts peak, with 88 dB sensitivity at 1 watt\/1 meter. Its 49 Hz to 25 kHz frequency response supports bass and midrange duties while extending into higher frequencies through the integrated tweeter array. The 4-ohm nominal impedance is suited to common aftermarket head units and compatible car-audio amplifiers.\u003c\/p\u003e\u003cp\u003eThe 3-way layout uses a 6.5-inch mica-reinforced polypropylene cone, a 3\/4-inch Tetolon inverted-dome tweeter, and a 3\/8-inch polypropylene piezo super tweeter. This arrangement is designed to add high-frequency detail while retaining the simple, single-location installation of a coaxial speaker. An internal tweeter high-pass network is specified at 9 kHz with a 6 dB-per-octave slope.\u003c\/p\u003e\u003cp\u003eRockford Fosgate's VAST 2.0 surround architecture increases usable cone area compared with a conventional surround arrangement. The speaker also uses a Santoprene half-roll surround, linear Nomex spider, vented Kapton voice-coil former, and Y35 ferrite motor structure. These construction elements support controlled cone movement and heat management in normal vehicle-audio use.\u003c\/p\u003e\u003cp\u003eFor fitment flexibility, the P1V2-65 has a removable motor cover and an updated mounting flange. It requires a 5.67-inch cutout and has a 2.48-inch mounting depth with the motor cover installed, or 2.24 inches without it. The pair includes basic installation hardware and wiring accessories, while protective grilles are sold separately.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Combines midrange, tweeter, and piezo elements in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Per Speaker:\u003c\/strong\u003e Supports properly matched factory or aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with common car-audio speaker outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVAST 2.0 Surround:\u003c\/strong\u003e Increases available cone area for efficient air movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated High-Frequency Network:\u003c\/strong\u003e Uses a 9 kHz tweeter high-pass crossover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Motor Cover:\u003c\/strong\u003e Reduces mounting depth for tighter installation locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P1V2-65 uses a mica-reinforced polypropylene cone with a chemically bonded Santoprene surround, plus a glass-fiber-reinforced PA66 composite basket. Its overhung voice coil uses a vented Kapton former, while the Y35 ferrite motor, linear Nomex spider, stitched tinsel leads, and co-molded terminals support the speaker assembly. An integrated concealed crossover network is built into the coaxial design.\u003c\/p\u003e\u003cp\u003eBefore purchase, compare the vehicle's available opening, depth, and front-side clearance with the 5.67-inch cutout, 2.48-inch mounting depth, and 0.51-inch front-side-clearance requirements. The package includes screws, a cutout template, short speaker-wire leads, crimp connectors, and spade terminals; grilles are not included. Observe terminal polarity, route wiring before mounting, and verify that door glass, locks, and other moving parts clear the speaker.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45767997522111,"sku":"P1V2-65","price":82.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61qf7eVpWpL.jpg?v=1782270223"},{"product_id":"rockford-fosgate-m0-65","title":"Rockford Fosgate M0-65 6.5\" Marine Coaxial Speakers","description":"\u003cp\u003eThe Rockford Fosgate M0-65 is a white pair of 6.5-inch, 2-way coaxial marine speakers designed for boats, off-road vehicles, and other exposed audio installations. It provides a full-range replacement or upgrade where conventional interior speakers may not be suited to sun, moisture, salt, and dust. The pair combines a dedicated woofer and grille-integrated tweeter in each speaker for a compact all-in-one installation.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for listeners who want clear music reproduction in open-air environments without adding separate tweeters and external passive crossovers. Their 4-ohm nominal impedance allows integration with compatible marine source units or amplifiers. With 65 watts RMS power handling and 90.5 dB sensitivity, they are suited to moderate-power marine and powersports systems.\u003c\/p\u003e\u003cp\u003eThe M0-65 uses an injection-molded mineral-filled polypropylene cone with a co-molded Santoprene surround to reproduce low and midrange frequencies. A grille-integrated 0.5-inch LCP balanced-dome tweeter handles high frequencies. The result is a coaxial speaker layout that keeps the installation straightforward while covering a rated 40 Hz to 25 kHz frequency range.\u003c\/p\u003e\u003cp\u003eRockford Fosgate's Element Ready construction is engineered for marine and off-road use. The speakers use a sealed motor design, UV-stable ASA plastic frame and grille, zinc-nickel-plated marine-grade brass terminals, and a UV- and salt-fog-resistant Santoprene surround. A fully sealed integrated concealed crossover network helps protect the crossover components within the speaker assembly.\u003c\/p\u003e\u003cp\u003eThe M0-65 can serve as a direct speaker upgrade in appropriately sized factory locations or as part of a new multi-speaker marine audio system. Its 6.5-inch format works well in panels, consoles, and enclosures with adequate cutout and rear-depth clearance. For higher-output systems, match the speakers with amplification that is appropriate for their 4-ohm load and 65-watt RMS rating.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter functions in each 6.5-inch speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e65-Watt RMS Rating:\u003c\/strong\u003e Supports compatible moderate-power marine and powersports amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated LCP Tweeter:\u003c\/strong\u003e Adds high-frequency reproduction without separate tweeter mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElement Ready Construction:\u003c\/strong\u003e Uses weather-resistant materials for exposed vehicle environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed ICC Crossover:\u003c\/strong\u003e Protects the built-in 6 dB\/octave crossover network.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVAST Surround Technology:\u003c\/strong\u003e Increases effective radiating cone area by up to 25%.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe M0-65 uses a mineral-filled polypropylene cone, co-molded Santoprene surround, linear synthetic-fiber-blend spider, and 1-inch high-temperature Kapton woofer voice-coil former. Its sealed motor assembly, UV-stable ASA plastic frame and grille, and marine-grade brass terminals are selected for marine and off-road exposure. The white grille and trim ring are mounted on the speakers.\u003c\/p\u003e\u003cp\u003eConfirm the mounting surface provides a 5.38-inch cutout and at least 2.52 inches of mounting depth before installation. The screw mounting diameter is 6.12 inches, with a 60-degree mounting-screw angle, so verify the mounting pattern as well as rear clearance. Wire each speaker with correct polarity to a compatible 4-ohm source or amplifier, and avoid exceeding its 65-watt RMS power-handling rating.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768021180607,"sku":"M0-65","price":91.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71lpSN2dBCL.jpg?v=1782270312"},{"product_id":"rockford-fosgate-m0-65b","title":"Rockford Fosgate M0-65B 6.5\" Marine Coaxial Speakers","description":"\u003cp\u003eThe Rockford Fosgate M0-65B is a pair of 6.5-inch, 2-way full-range marine speakers designed for open-air audio systems. They are intended for boats, off-road vehicles, and other installations exposed to outdoor conditions. Their black finish provides a coordinated appearance for dark speaker locations and marine interiors.\u003c\/p\u003e\u003cp\u003eThese speakers combine a 6.5-inch midrange driver with a grille-integrated 0.5-inch LCP balanced-dome tweeter. The coaxial layout keeps bass, midrange, and high-frequency reproduction in one mounting location. This makes the M0-65B a practical replacement or upgrade where a conventional 6.5-inch speaker opening is available.\u003c\/p\u003e\u003cp\u003eWith a 4-ohm nominal impedance and 65-watt RMS power handling, the M0-65B is suited to compatible marine receivers and external amplifiers. Its 40 Hz to 25 kHz frequency-response specification covers the primary range needed for full-range playback. A built-in 6 dB-per-octave high-pass crossover directs the high frequencies to the tweeter.\u003c\/p\u003e\u003cp\u003eThe M0-65B uses an injection-molded, mineral-filled polypropylene cone with a co-molded Santoprene surround. Rockford Fosgate's VAST surround design increases effective radiating cone area, while the sealed motor and concealed crossover help support use in marine and motorsports environments. UV-stable ASA plastic is used for the frame and grille.\u003c\/p\u003e\u003cp\u003eThese speakers fit naturally into a system using a marine source unit or a properly matched amplifier. They can be used as replacements for weather-exposed factory speakers or as part of a larger marine audio upgrade with additional full-range speakers and a subwoofer. The included stainless-steel mounting hardware supports installation in suitable panels.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Combines a 6.5-inch midrange and integrated tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Ready Construction:\u003c\/strong\u003e Sealed motor, UV-stable plastics, and corrosion-resistant terminals support outdoor use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e65-Watt RMS Handling:\u003c\/strong\u003e Matches with compatible marine receivers or amplifiers rated for 4-ohm speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated LCP Tweeter:\u003c\/strong\u003e The 0.5-inch balanced-dome tweeter handles upper-frequency detail without separate mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVAST Surround Technology:\u003c\/strong\u003e Increases effective cone area through the vertical attach surround design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcealed Crossover:\u003c\/strong\u003e A sealed 6 dB-per-octave high-pass network is integrated into the speaker.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe M0-65B uses a mineral-filled polypropylene cone, UV- and salt-fog-resistant Santoprene surround, linear synthetic-fiber-blend spider, and a 1-inch high-temperature Kapton woofer voice-coil former. Its frame and grille are made from UV-stable ASA plastic, and the marine-grade brass terminals are zinc-nickel plated. The grille and trim ring are mounted on the speakers.\u003c\/p\u003e\u003cp\u003eConfirm the 5.38-inch cutout, 2.52-inch mounting depth, and 6.12-inch screw mounting diameter before installation. Route and connect speaker wire before fastening the speakers, observe the marked positive terminal, and avoid overtightening the screws. The package includes a pair of speakers, stainless-steel socket-head screws, Allen\/hex drill-bit adaptors, and a drill bit.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768025768127,"sku":"M0-65B","price":91.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71GOGyhAhHL.jpg?v=1782270314"},{"product_id":"rockford-fosgate-r165x3","title":"Rockford Fosgate R165X3 6.5\" 3-Way Full-Range Speakers","description":"\u003cp\u003eThe Rockford Fosgate R165X3 is a pair of 6.5-inch, 3-way full-range coaxial speakers made for replacing worn or limited factory door or rear-deck speakers. It provides a straightforward upgrade path for vehicles that accept this speaker size and mounting profile. With a 4-ohm nominal impedance and 45-watt RMS power handling per speaker, it can be used with compatible factory radios or modest aftermarket amplification.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for listeners who want fuller everyday music playback without moving to a separate-component speaker system. The 3-way arrangement combines a polypropylene woofer cone with a silk-dome tweeter and a pole-mounted piezo supertweeter. This design is built to cover bass, midrange, and high-frequency content from one mounting location.\u003c\/p\u003e\u003cp\u003eThe R165X3 has a 52 Hz to 20 kHz frequency response and 91 dB sensitivity at 1 watt\/1 meter. Its 45-watt RMS and 90-watt peak ratings are specified per speaker, while the pair is rated for 90 watts RMS and 180 watts peak. Rockford Fosgate rates its speaker power handling to the CEA-2031 standard.\u003c\/p\u003e\u003cp\u003eA polypropylene cone and rubber surround form the main woofer assembly, while the integrated 6 dB high-pass crossover directs high-frequency content to the upper drivers. The 1-inch voice coil, 0.07-inch maximum linear excursion, and 69 Hz free-air resonance are part of the speaker's published engineering data. The coaxial layout keeps all drivers in a single conventional round speaker footprint.\u003c\/p\u003e\u003cp\u003eFor installation planning, each R165X3 needs a 5.51-inch mounting cutout and 2.15 inches of mounting depth. The package includes a pair of grilles or trim rings and installation accessories, helping when mounting locations do not have factory covers. It is a practical fit for a factory-replacement system, and an amplifier channel rated within the speaker's 45-watt RMS capacity can be used when additional output is desired.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Combines woofer, tweeter, and supertweeter in one speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e45 Watts RMS Per Speaker:\u003c\/strong\u003e Supports compatible factory radios and modest amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Provides a durable main driver for everyday playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilk-Dome and Piezo Tweeters:\u003c\/strong\u003e Handles upper-frequency detail from the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 dB High-Pass Crossover:\u003c\/strong\u003e Directs high frequencies to the upper drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Grilles:\u003c\/strong\u003e Provides a finished appearance for custom mounting locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe R165X3 uses a polypropylene woofer cone with a rubber surround, a 1-inch voice coil, a silk-dome tweeter, and a pole-mounted piezo supertweeter. Its round multi-mount frame measures 6.5 inches in nominal diameter, and the supplied grille or trim ring measures 6.73 inches in diameter. Rockford Fosgate lists the speaker as Klippel verified and CEA-2031 compliant for power handling.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle has a 5.51-inch cutout and at least 2.15 inches of mounting depth before purchase; also check clearance for windows, locks, and door panels. The kit includes 16 feet of 26-gauge speaker wire, eight speed clips, four mounting screws, and grilles or trim rings. Observe terminal polarity during wiring, use suitable connectors, and disconnect the vehicle battery's negative terminal before installation.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768040775871,"sku":"R165X3","price":37.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71Gneft_TJL.jpg?v=1782270365"},{"product_id":"rockford-fosgate-r165-s","title":"Rockford Fosgate R165-S 6.5\" Component Speakers","description":"\u003cp\u003eThe Rockford Fosgate Prime R165-S is a 6.5-inch, 2-way component speaker system made for replacing factory door speakers with separate woofers and tweeters. It is intended for vehicle owners who want clearer front-stage sound while retaining a practical, compact installation format. The set includes a pair of woofers, a pair of tweeters, grilles, and mounting hardware.\u003c\/p\u003e\u003cp\u003eIts 40-watt RMS power rating suits many factory-radio upgrades while also leaving room for use with a modest aftermarket amplifier. The component layout places the tweeters separately from the woofers, allowing more flexible placement than a coaxial speaker. This can help direct higher frequencies toward the listening area when the vehicle has suitable tweeter locations.\u003c\/p\u003e\u003cp\u003eThe R165-S uses mica-injected polypropylene woofer cones and foam surrounds. These materials support a lightweight, rigid woofer design intended for midrange detail and everyday car-audio use. The specified frequency response is 60 Hz to 20 kHz, so a subwoofer can be added later for deeper low-frequency output.\u003c\/p\u003e\u003cp\u003eSeparate 1-inch Mylar balanced-dome tweeters handle the upper frequencies. Each tweeter includes an integrated 6 dB-per-octave high-pass crossover, eliminating the need to mount a separate crossover box. The tweeters support flush, surface, and angled surface mounting options for adaptable placement.\u003c\/p\u003e\u003cp\u003eThis system is a practical fit for factory replacement projects and entry-level component upgrades. Its 4-ohm nominal impedance and 89 dB sensitivity support compatibility with common car-audio speaker outputs. Confirm vehicle-specific cutout, depth, wiring, and mounting requirements before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Component System:\u003c\/strong\u003e Separate woofers and tweeters support flexible front-stage placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40-Watt RMS Rating:\u003c\/strong\u003e Matches moderate factory or aftermarket amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMica-Injected Polypropylene Cones:\u003c\/strong\u003e Provide a rigid, lightweight woofer diaphragm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMylar Balanced-Dome Tweeters:\u003c\/strong\u003e Handle high frequencies with separate mounting options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated High-Pass Crossover:\u003c\/strong\u003e Simplifies tweeter wiring without a separate crossover box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory-Replacement Dimensions:\u003c\/strong\u003e Compact 1.97-inch woofer mounting depth aids fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe R165-S combines mica-injected polypropylene woofer cones, foam surrounds, stamped-steel frames, and Mylar balanced-dome tweeters. Grilles or trim rings and mounting hardware are included. The woofers use standard spade terminals, while the tweeter crossover is integrated into the tweeter assembly.\u003c\/p\u003e\u003cp\u003eVerify the 5.05-inch woofer mounting cutout and 1.97-inch mounting depth against the intended vehicle location before purchase. Connect the amplifier or radio output to the woofer's primary terminals, then connect the tweeter to the woofer's secondary terminals while maintaining polarity. Run wiring before mounting, check clearance for windows and other moving door hardware, and use vehicle-specific adapters or harnesses when required.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768042643647,"sku":"R165-S","price":63.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71kLzK5w0yL.jpg?v=1782270399"},{"product_id":"rockford-fosgate-hd24-stg3","title":"Rockford Fosgate HD24-STG3 6.5\"\/6x9\" Harley Audio Kit","description":"\u003cp\u003eThe Rockford Fosgate HD24-STG3 is a Stage-3 amplified audio upgrade for select 2024+ Harley-Davidson Touring motorcycles with Skyline OS. It combines upper-fairing and saddlebag speakers with a dedicated four-channel amplifier, addressing the limited output and coverage of a basic motorcycle audio setup. The kit is designed as a coordinated system rather than a collection of separate components.\u003c\/p\u003e\u003cp\u003eThis package is intended for Road Glide and Street Glide riders seeking fuller sound coverage at highway speeds. Two 6.5-inch fairing speakers handle the front soundstage, while two 6x9-inch speakers add output from the saddlebag area. Both speaker pairs use 2-way designs and are rated for 150 watts RMS per speaker.\u003c\/p\u003e\u003cp\u003eThe system is voiced for open-air motorcycle listening, with long-throw woofers and extended low-frequency response intended to support stronger bass and midrange presence. Heat-resistant motor structures and radiator-ring cooling are used to manage speaker heat during demanding use. The result is a balanced, high-output platform built for riding conditions rather than an enclosed vehicle cabin.\u003c\/p\u003e\u003cp\u003eIts included TMA-1000X4i amplifier uses direct A2B digital integration with compatible Harley-Davidson Skyline OS infotainment systems. The amplifier includes DSP processing and Bluetooth connectivity for RF Connect app setup, including loading a tune matched to the audio kit. Gain and crossover settings can also be adjusted digitally through the app.\u003c\/p\u003e\u003cp\u003eThe HD24-STG3 is designed to provide an upgrade path as well as a complete four-speaker system. Its four-channel amplifier supports up to eight-speaker audio systems when expanded with compatible components. The supplied installation hardware, grilles, wiring, amplifier mounting components, and saddlebag cut-in kit keep the main equipment matched for a single-system installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Speaker System:\u003c\/strong\u003e Includes two 6.5-inch fairing speakers and two 6x9-inch saddlebag speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000-Watt Amplifier:\u003c\/strong\u003e Four-channel digital amplifier provides dedicated power for the included speaker system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkyline OS Integration:\u003c\/strong\u003e Direct A2B connection works without factory-radio flashing on compatible motorcycles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF Connect Tuning:\u003c\/strong\u003e Bluetooth app control loads DSP tunes and adjusts gain and crossover settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElement Ready Construction:\u003c\/strong\u003e Components and harnesses are designed for water, dirt, UV, and vibration exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpansion Capability:\u003c\/strong\u003e The amplifier supports compatible systems with up to eight speakers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe HD24-STG3 uses motorcycle-specific components made for exposure to vibration and weather. The speakers use carbon-filled curvilinear poly cones, Santoprene VAST surrounds, Poly-Nomex spiders, reinforced composite baskets, and neodymium motor assemblies. The amplifier has an IPX4-rated Element Ready chassis, an extruded-aluminum heatsink, and a compact form factor for motorcycle installation.\u003c\/p\u003e\u003cp\u003eThe kit includes model-specific fairing grilles for 2024+ Road Glide and Street Glide applications, saddlebag grilles, a bag-lid cut-in kit, amplifier mounting hardware, and a plug-and-play wiring kit. It is intended for select 2024+ Harley-Davidson Touring motorcycles equipped with Skyline OS; confirm motorcycle fitment, factory-audio configuration, and saddlebag type before purchase. Rockford Fosgate lists typical installation time at approximately five hours.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768044183743,"sku":"HD24-STG3","price":1844.07,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61X4LixRDoL.jpg?v=1782270449"},{"product_id":"rockford-fosgate-p2v2-65","title":"Rockford Fosgate P2V2-65 6.5\" Convertible Speakers","description":"\u003cp\u003eThe Rockford Fosgate P2V2-65 is a pair of 6.5-inch, 4-ohm 2-way convertible car speakers designed to replace factory speakers in compatible vehicle locations. Its removable tweeters allow the set to work as a conventional coaxial speaker system or as a separated component system. This flexibility suits vehicles with either a single door-speaker location or separate woofer and tweeter locations.\u003c\/p\u003e\u003cp\u003eIn coaxial configuration, the tweeter locks into the center of each woofer for a straightforward installation in a single speaker opening. For a component layout, the tweeters can be removed and installed in the supplied flush- or surface-mount cups. Woofer phase plugs are included for use after the tweeters are relocated.\u003c\/p\u003e\u003cp\u003eThe P2V2-65 is rated for 75 watts RMS and 150 watts peak power handling per speaker. Its 49 Hz to 25 kHz frequency response and 88 dB sensitivity rating at 1 watt\/1 meter support use with an aftermarket amplifier or a compatible factory or aftermarket radio. A 3\/4-inch Tetolon inverted-dome tweeter handles high-frequency reproduction.\u003c\/p\u003e\u003cp\u003eRockford Fosgate uses a mica-reinforced polypropylene woofer cone, Santoprene half-roll surround, vented Kapton voice-coil former, Nomex spider, and ferrite motor structure. The VAST 2.0 surround geometry increases effective radiating cone area without increasing the basket size. An overhung voice-coil design and vented former are intended to support controlled operation and heat dissipation.\u003c\/p\u003e\u003cp\u003eFor component installations, the included external passive crossover provides a 9 kHz high-pass filter at 12 dB per octave and offers 0 dB or -3 dB tweeter input options. When the tweeter remains mounted in the woofer, the internal crossover uses a 9 kHz high-pass filter at 6 dB per octave. The fit-focused frame and removable motor cover help accommodate a range of factory mounting locations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConvertible 2-Way Design:\u003c\/strong\u003e Use as coaxial speakers or separate component speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI.L.M. Tweeter Lock:\u003c\/strong\u003e Locks or unlocks tweeters from the woofer assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Rating:\u003c\/strong\u003e Matches compatible amplification for each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Passive Crossovers:\u003c\/strong\u003e Support separate-tweeter component system wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVAST 2.0 Surround:\u003c\/strong\u003e Increases effective cone area within the basket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Motor Cover:\u003c\/strong\u003e Reduces mounting depth in restricted locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P2V2-65 uses a 15% glass-fiber-reinforced PA66 composite basket, mica-reinforced polypropylene cone, Santoprene surround, linear Nomex spider, and Y35 ferrite magnet structure. Its 1.25-inch vented Kapton woofer voice-coil former and braided tinsel leads are designed for durable operation. Co-molded basket terminals and a 2-pin Micro-Fit 3.0 crossover connection help keep the installation organized.\u003c\/p\u003e\u003cp\u003eConfirm the 5.42-inch cutout requirement, 2.5-inch mounting depth, and 0.43-inch front-side clearance before purchase. Removing the motor cover reduces required mounting depth to 2.26 inches. For a separated-tweeter installation, use the included passive crossover and select either the 0 dB or -3 dB tweeter input; grilles are not included.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768045101247,"sku":"P2V2-65","price":181.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/51GdOrlzMTL.jpg?v=1782270455"},{"product_id":"rockford-fosgate-x317-stg2","title":"Rockford Fosgate X317-STG2 Can-Am X3 6.5\" Audio Kit","description":"\u003cp\u003eThe Rockford Fosgate X317-STG2 is a vehicle-specific Stage 2 audio kit for select 2017–2021 Can-Am Maverick X3 models. It combines a dash-mounted PMX-1 digital media receiver with front and rear 6.5-inch speakers for a complete four-speaker upgrade. The package is designed for riders who want integrated music playback and wider sound coverage without piecing together a system from individual components.\u003c\/p\u003e\u003cp\u003eThe PMX-1 receiver provides Bluetooth audio streaming, USB playback and charging, a rear auxiliary input, plus AM\/FM\/Weather Band radio reception. Its built-in four-channel amplifier supplies 25 watts RMS per channel at 4 ohms, while RCA preamp outputs allow the system to be expanded with external amplification later. A 2.3-inch full-dot-matrix LCD and rotary encoder keep core controls accessible from the dash.\u003c\/p\u003e\u003cp\u003eFront sound comes from a pair of M0-65B 6.5-inch marine-grade coaxial speakers mounted in the included X317-FSE front speaker panels. The rear system uses a pair of M0WL-65MB 6.5-inch Moto-Can speakers, providing elevated rear placement on compatible ROPS tubing. Each included speaker is rated for 65 watts RMS and uses a 4-ohm nominal impedance.\u003c\/p\u003e\u003cp\u003eThe speaker system is engineered for outdoor powersports use, with weather-resistant materials and Element Ready construction across its major audio components. Mineral-filled polypropylene cones, Santoprene surrounds, sealed motor assemblies, and UV-stable plastics support use in exposed off-road environments. The Moto-Can enclosures are IPX6 rated and use sealed Deutsch\/Amphenol connections.\u003c\/p\u003e\u003cp\u003eThis kit supplies the receiver, dash kit, front speaker panels, front speakers, rear Moto-Cans, rear add-on harness, and antenna needed for the core installation. It does not include an external amplifier, so the PMX-1 powers the speakers in the supplied configuration. RCA outputs and selectable crossover settings provide a practical path for adding amplification or a subwoofer to a compatible Maverick X3 audio system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-Specific Audio Kit:\u003c\/strong\u003e Designed for select 2017–2021 Can-Am Maverick X3 models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePMX-1 Media Receiver:\u003c\/strong\u003e Provides Bluetooth, USB, auxiliary, and radio listening options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour 6.5-Inch Speakers:\u003c\/strong\u003e Includes front coaxials and rear Moto-Can speaker enclosures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Smart-Lok Panels:\u003c\/strong\u003e Mount the included M0-65B speakers in dedicated front panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElement Ready Construction:\u003c\/strong\u003e Uses materials intended for exposed powersports environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpansion-Friendly Outputs:\u003c\/strong\u003e RCA preouts support future external amplifier or subwoofer additions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe X317-STG2 combines a textured, molded X317-DK dash kit with vehicle-oriented front speaker panels and black rear Moto-Can enclosures. The M0-65B speakers use UV-stable ASA frames and grilles, sealed motor assemblies, marine-grade terminals, mineral-filled polypropylene cones, and Santoprene surrounds. Rear M0WL-65MB enclosures use high-density ASA construction, installed sport grilles, sealed connectors, and clamps intended for 1- to 2-inch ROPS tubing.\u003c\/p\u003e\u003cp\u003eVerify exact Maverick X3 trim and model-year fitment before ordering. The kit uses direct-connect harnessing and is designed to avoid cutting the vehicle wiring; installation requires minimal drilling for the dash kit. Mount the rear Moto-Cans securely on compatible tubing, route the supplied rear harness away from moving or hot vehicle parts, and disconnect vehicle battery power before installation.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768046149823,"sku":"X317-STG2","price":1104.84,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71lzzrvvpiL.jpg?v=1782270487"},{"product_id":"rockford-fosgate-x317-stg3","title":"Rockford Fosgate X317-STG3 6.5\"\/10\" Maverick X3 Audio Kit","description":"\u003cp\u003eThe Rockford Fosgate X317-STG3 is a vehicle-specific Stage 3 audio kit for select Can-Am Maverick X3 models. It combines a dash-integrated digital media receiver, front speaker panels, an external amplifier, and an under-seat subwoofer enclosure in one matched package. The system is intended for riders who want a complete audio upgrade without selecting separate major components.\u003c\/p\u003e\u003cp\u003eIts PMX-2 digital media receiver supplies AM, FM, and weather-band radio alongside Bluetooth audio streaming, USB, and auxiliary inputs. The compact 2.7-inch color display is installed through the included X317-DK dash kit for an integrated appearance. Built-in tuning features, including a 7-band graphic EQ and adjustable crossovers, help tailor playback for an open-cab powersports environment.\u003c\/p\u003e\u003cp\u003eFront sound is handled by a pair of M1-65B 6.5-inch two-way Color Optix speakers mounted in X317-FSE Smart-Lok front speaker panels. These 4-ohm speakers use mineral-filled polypropylene cones, Santoprene surrounds, integrated 1-inch LCP balanced-dome tweeters, and sealed crossover networks. Their Color Optix RGB illumination is managed by the included PMX-RGB controller.\u003c\/p\u003e\u003cp\u003eFor low-frequency support, the kit includes the X317-M1FWE sealed under-seat enclosure with a preloaded 10-inch Element Ready subwoofer. Its suspended, down-firing design fits below the front driver or passenger seat while allowing seat adjustment travel. The enclosure is molded and textured to complement the Maverick X3 interior and uses OEM mounting locations.\u003c\/p\u003e\u003cp\u003eAmplification comes from the M5-800X4 four-channel Element Ready amplifier and the included X317-K8 8-gauge installation kit. The amplifier's PRESET function is designed for Rockford Fosgate UTV audio packages, reducing setup work when the supplied system components are used together. This kit is a front-stage-and-subwoofer foundation; compatible rear speaker additions can be considered separately where vehicle fitment permits.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-Specific Stage 3 Kit:\u003c\/strong\u003e Combines source unit, speakers, amplifier, subwoofer enclosure, wiring, and mounting parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePMX-2 Digital Media Receiver:\u003c\/strong\u003e Provides Bluetooth, AM\/FM\/weather-band radio, USB, and auxiliary playback options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor Optix Front Speakers:\u003c\/strong\u003e Includes two illuminated 6.5-inch M1-65B two-way speakers in front panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnder-Seat 10-Inch Bass:\u003c\/strong\u003e Sealed X317-M1FWE enclosure adds concealed down-firing low-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM5-800X4 Amplification:\u003c\/strong\u003e Four-channel Class-AD amplifier provides matched power and adjustable crossovers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF Connect Lighting Control:\u003c\/strong\u003e PMX-RGB controller manages compatible Color Optix RGB speaker lighting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe X317-STG3 uses Element Ready components intended for outdoor powersports use. The amplifier has sealed harness connections and an extruded-aluminum heat sink, while the M1-65B speakers use UV- and salt-fog-resistant Santoprene surrounds. The subwoofer enclosure uses a lightweight, seamless roto-molded construction with texture and color matched to the vehicle interior.\u003c\/p\u003e\u003cp\u003eConfirm exact Maverick X3 year, trim, and factory configuration before ordering, as fitment is model-specific. The package includes the X317-DK dash kit, X317-FSE front speaker panels, X317-K8 amp installation kit, PMX-RGB controller, and associated core audio components. Install the enclosure at the approved under-seat position, follow supplied harness routing and fuse guidance, and use the amplifier PRESET setting when installing this matched Rockford Fosgate package.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768046215359,"sku":"X317-STG3","price":1325.81,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71QLiTMyuWL.jpg?v=1782270489"},{"product_id":"rockford-fosgate-rzr14-stg1","title":"Rockford Fosgate RZR14-STG1 Polaris RZR Audio Kit With 6.5\" Speakers","description":"\u003cp\u003eThe Rockford Fosgate RZR14-STG1 is a vehicle-specific Stage 1 audio package for select 2014-2021 Polaris RZR models. It combines a PMX-1 marine digital media receiver, two M0-65B 6.5-inch full-range speakers, front speaker enclosures, and a RZR-specific dash kit. The package is intended to add integrated music playback and radio reception without using a universal head-unit installation.\u003c\/p\u003e\u003cp\u003eThis kit is suited to RZR owners who want a factory-style location for a Bluetooth-capable receiver and front-mounted speakers. The supplied PMX-1 supports Bluetooth audio streaming, USB media playback, a rear auxiliary input, and AM\/FM\/Weather Band listening. Its compact marine-oriented design is appropriate for open-cabin powersports use.\u003c\/p\u003e\u003cp\u003eThe included M0-65B speakers use a 2-way coaxial design with 6.5-inch mineral-filled polypropylene woofers and integrated 0.5-inch balanced-dome tweeters. Their 4-ohm design, 65-watt RMS rating per speaker, and 40 Hz-25 kHz frequency response provide full-range output for music and radio listening. UV- and salt-fog-resistant materials support use in exposed environments.\u003c\/p\u003e\u003cp\u003eRockford Fosgate equips the PMX-1 with a 7-band graphic EQ, parametric EQ functions, Punch EQ, and selectable crossover settings. These controls allow the system to be adjusted for listening preferences and for later system expansion. The receiver also includes a voltage gauge with a low-voltage warning to help monitor the vehicle electrical system.\u003c\/p\u003e\u003cp\u003eThe RZR14-STG1 is designed around the included RZR14-DK dash kit and RZR14-FSE front speaker enclosures for compatible RZR applications. The receiver's built-in amplifier delivers 25 watts RMS to each of four channels at 4 ohms, while its RCA outputs allow connection to external amplification when a larger system is desired. Confirm the exact RZR year, model, trim, and factory equipment before purchase.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-Specific Audio Kit:\u003c\/strong\u003e Combines the receiver, dash kit, speakers, and front enclosures for select Polaris RZR models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePMX-1 Digital Media Receiver:\u003c\/strong\u003e Provides Bluetooth, USB, rear auxiliary input, and AM\/FM\/Weather Band sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch M0 Speakers:\u003c\/strong\u003e Includes two 2-way, 4-ohm full-range marine-grade speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Four-Channel Amplifier:\u003c\/strong\u003e Supplies 25 watts RMS per channel at 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound Adjustment Controls:\u003c\/strong\u003e Offers 7-band EQ, PEQ, Punch EQ, and selectable crossover settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX6 Receiver Front Panel:\u003c\/strong\u003e Helps protect the PMX-1 front panel from water exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PMX-1 uses a 2.3-inch full dot-matrix LCD behind Gorilla Glass, with a compact chassis and marine-grade front panel. The M0-65B speakers use mineral-filled polypropylene cones, Santoprene VAST surrounds, UV-stable ASA plastic parts, sealed motor structures, and corrosion-resistant connection hardware. The supplied black speakers are installed in the included RZR14-FSE front enclosures.\u003c\/p\u003e\u003cp\u003eThe package includes the RZR14-DK upper\/lower dash kit to mount the receiver in compatible RZR dashboards and includes application-specific wiring for select vehicles. The kit is described as requiring no drilling or cutting on supported applications, but fitment must be verified against the exact RZR model and year. For future expansion, use the PMX-1's RCA outputs and configure its crossover, rear-RCA, and internal-amplifier settings to match the added equipment.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768046280895,"sku":"RZR14-STG1","price":626.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/6106oHsnvoL.jpg?v=1782270491"},{"product_id":"rockford-fosgate-rzr14-stg3","title":"Rockford Fosgate RZR14-STG3 RZR Kit With 6.5\" Speakers \u0026 10\" Sub","description":"\u003cp\u003eThe Rockford Fosgate RZR14-STG3 is a complete Stage 3 audio system engineered for select Polaris RZR side-by-side models. It combines a dash-mounted digital media receiver, front speakers, a front-mounted subwoofer, amplification, RGB lighting control, vehicle-specific enclosures, and wiring. The kit is intended for riders who want a coordinated audio upgrade without selecting every major component separately.\u003c\/p\u003e\u003cp\u003eThe system uses a PMX-2 AM\/FM\/weather-band digital media receiver for Bluetooth streaming, USB playback and charging, auxiliary input, and Pandora control. Its 2.7-inch color TFT display is integrated through the included RZR14-DK upper\/lower dash kit. The receiver provides source control while the external M5-800X4 amplifier supplies the primary system power.\u003c\/p\u003e\u003cp\u003eFor the main soundstage, the kit includes a pair of M1-65B 6.5-inch two-way Color Optix speakers installed in RZR14-FSE front speaker enclosures. These 4-ohm speakers are rated at 75 watts RMS each and use RGB illumination. Their purpose-built enclosures position the speakers in the front of compatible RZR cabins without requiring custom speaker pods.\u003c\/p\u003e\u003cp\u003eLow-frequency output comes from the included M1D2-10B 10-inch dual-voice-coil Color Optix subwoofer and RZR14-FWE front loaded enclosure. The subwoofer is rated for 300 watts RMS and has a switchable 1-ohm or 4-ohm nominal impedance configuration. The enclosure is ported and is designed to mount in the vehicle while preserving passenger space.\u003c\/p\u003e\u003cp\u003eThe M5-800X4 four-channel amplifier provides 800 watts total rated RMS power and is preset for the included system configuration. Color Optix lighting is managed by the included PMX-RGB controller and can be adjusted through the RF Connect mobile app. With its supplied vehicle-specific mounting hardware and 8-gauge installation harness, this kit provides a direct-fit foundation that can be expanded within the Rockford Fosgate RZR audio ecosystem.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Stage 3 System:\u003c\/strong\u003e Includes the receiver, amplifier, speakers, subwoofer, enclosures, wiring, dash kit, and RGB controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePMX-2 Digital Receiver:\u003c\/strong\u003e Adds Bluetooth streaming, AM\/FM\/weather-band radio, USB, auxiliary input, and a 2.7-inch color display.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM1-65B Front Speakers:\u003c\/strong\u003e A pair of 6.5-inch two-way speakers provides amplified front-cabin sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Color Optix Subwoofer:\u003c\/strong\u003e The included loaded front enclosure adds dedicated bass output without a custom box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM5-800X4 Amplifier:\u003c\/strong\u003e Four-channel external amplification supplies 100 watts RMS per channel at 2 or 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor Optix Lighting Control:\u003c\/strong\u003e PMX-RGB controller supports adjustable RGB speaker and subwoofer illumination through RF Connect.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe RZR14-STG3 uses Element Ready components intended for exposure to outdoor motorsports conditions, including dust, water, UV exposure, vibration, and corrosion. The vehicle-specific dash kit and front enclosures are designed around factory mounting locations and a factory-style appearance. The M1 speakers and subwoofer use UV-stable components, integrated lighting connections, and protective grilles.\u003c\/p\u003e\u003cp\u003eVerify exact vehicle fitment before ordering, including model year, seating configuration, factory options, and dash-pocket availability. The kit includes an RZR14-K8 8-gauge amplifier installation kit, direct-fit enclosures, a wired antenna, and mounting hardware; follow the supplied installation instructions and amplifier preset guidance. On applicable 2014-2018 RZR models, the PMX source unit uses the lower dash pocket, while applicable 2019-and-newer models use the upper pocket.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768046346431,"sku":"RZR14-STG3","price":1468.93,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71iLnVsQMSL.jpg?v=1782270493"}],"url":"https:\/\/nsidistributor.com\/collections\/6-5-inch-speakers.oembed","provider":"NSI Audio Distributing","version":"1.0","type":"link"}