{"title":"5x7 Inch Speakers","description":null,"products":[{"product_id":"pair-of-gravity-5x7-6x8-inch-2-way-230-watts-maximum-power-handling-coaxial-car-audio-speakers-cea-rated-5786h-4-ohms-impedance","title":"Gravity GR-5786H 5x7\/6x8\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Gravity GR-5786H is a pair of 5x7 \/ 6x8-inch coaxial car speakers designed as a replacement option for compatible factory speaker locations. It is intended for drivers who want to refresh worn factory speakers or add clearer full-range sound without moving to a separate-component speaker system. Its 4-ohm design supports use with many factory and aftermarket car audio systems.\u003c\/p\u003e\u003cp\u003eEach GR-5786H speaker uses a 2-way coaxial layout, combining the main woofer and high-frequency driver in one assembly. This arrangement is well suited to door, rear-deck, or other factory-style locations where space is limited. The design is intended to reproduce midrange detail and treble while retaining the practicality of a full-range replacement speaker.\u003c\/p\u003e\u003cp\u003eSilver alpha cellulose cones form the main radiating surface, while moisture-resistant rubber surrounds support cone movement and help the speakers hold up in changing vehicle conditions. The listed frequency response is 70 Hz to 20 kHz, covering much of the audible midrange and treble range. For deeper bass, these speakers can be used as part of a system that also includes a dedicated subwoofer.\u003c\/p\u003e\u003cp\u003eAn anti-resonant stamped-steel basket provides the speaker structure and is intended to reduce unwanted vibration. The speakers use 25 mm voice coils and a 6.5-ounce magnet specification. A neo mylar soft-dome tweeter is incorporated into the coaxial assembly for high-frequency reproduction.\u003c\/p\u003e\u003cp\u003eThe GR-5786H is rated at 230 watts maximum power handling per pair, or 115 watts maximum per speaker. Spade terminals simplify conventional speaker-wire connections during installation. Before purchase, confirm the vehicle's factory opening, mounting depth, screw pattern, and any adapter requirements, since fitment can vary by vehicle even when the nominal speaker size matches.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5x7 \/ 6x8 Fitment:\u003c\/strong\u003e Designed for compatible oval factory speaker openings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilver Alpha Cellulose Cone:\u003c\/strong\u003e Provides the main full-range sound-producing surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Supports compatibility with many vehicle audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber Surround:\u003c\/strong\u003e Offers moisture resistance and supports cone movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpade Terminals:\u003c\/strong\u003e Enable straightforward conventional speaker-wire connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GR-5786H uses silver alpha cellulose cones, moisture-resistant rubber surrounds, and stamped-steel baskets. Its 25 mm voice coils, 6.5-ounce magnets, and integrated neo mylar soft-dome tweeters are housed in a full-range coaxial speaker format. This construction keeps the woofer and tweeter together for a compact replacement-speaker design.\u003c\/p\u003e\u003cp\u003eUse the GR-5786H as a pair in vehicle locations designed for 5x7-inch or 6x8-inch speakers, after verifying physical fitment for the specific vehicle. Connect the speaker leads to the spade terminals while observing proper polarity, and securely mount each speaker using vehicle-appropriate hardware. An amplifier is not required by the published product description, but source power should be matched carefully to the speaker's stated ratings.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":45625143984319,"sku":"650076329644","price":39.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71vldmDSnoL.jpg?v=1778538812"},{"product_id":"2x-gravity-sgr574-300-watts-peak-power-handling-6x8-5x7-4-way-car-audio-speakers-4-ohms-impedance-85db-sensitivity-moisture-resistant-rubber-surround","title":"Gravity SGR574 5x7\/6x8 4-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Gravity SGR574 is a pair of 4-way full-range car speakers designed for vehicles using 5x7-inch or 6x8-inch speaker locations. They provide a practical replacement option for worn or basic factory speakers while retaining a conventional 4-ohm load. The coaxial layout places multiple drivers in each speaker assembly to reproduce a broad portion of the audible range from one mounting location.\u003c\/p\u003e\u003cp\u003eWith a stated frequency response of 105Hz to 20kHz, the SGR574 is intended for everyday music listening, spoken-word playback, and general car-audio upgrades. Its 85 dB sensitivity rating and 4-ohm impedance make it suitable for use with compatible factory radios or aftermarket amplification. The 300-watt peak-power specification describes short-duration power handling rather than a continuous RMS rating.\u003c\/p\u003e\u003cp\u003eEach speaker uses a silver alpha cellulose cone and a moisture-resistant rubber surround. This combination is intended to support regular automotive use where temperature and humidity can vary. A stamped steel basket provides the structural frame for the speaker assembly.\u003c\/p\u003e\u003cp\u003eThe 4-way design includes midrange and high-frequency elements in addition to the main cone driver. Gravity specifies 28 mm PEI midrange and tweeter components, along with a neo-mylar soft-dome tweeter designation. This arrangement is intended to distribute different portions of the audio range across multiple driver elements.\u003c\/p\u003e\u003cp\u003eThe SGR574 is suited to a straightforward front- or rear-speaker upgrade where a vehicle accepts 5x7-inch or 6x8-inch speakers. Spade terminals support conventional speaker-wire connections, though vehicle-specific harness adapters may be useful depending on the factory wiring. For systems needing stronger low-frequency output below the speaker's rated range, these speakers can be paired with a properly configured subwoofer system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5x7\/6x8 Fitment:\u003c\/strong\u003e Designed for common oval factory speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Way Coaxial Design:\u003c\/strong\u003e Combines multiple driver elements in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W Peak Handling:\u003c\/strong\u003e Supports stated short-duration peak power capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible car-audio speaker outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilver Alpha Cellulose Cone:\u003c\/strong\u003e Provides the main cone-driver construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpade Terminals:\u003c\/strong\u003e Allow conventional speaker-wire connections during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe SGR574 uses silver alpha cellulose cones, moisture-resistant rubber surrounds, and an anti-resonant stamped steel basket. Its listed 6.5-ounce magnet and 25 mm voice coil are part of the speaker motor and voice-coil assembly. The speaker also incorporates 28 mm PEI midrange and tweeter components.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's factory speaker opening, mounting depth, mounting-hole pattern, and connector style before ordering, as these measurements are not specified in the available product information. Connect each speaker to a compatible 4-ohm channel and observe amplifier or radio power limits to avoid distortion. Factory harness adapters or mounting adapters may be needed for certain vehicles and are not confirmed as included.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":45628075147455,"sku":"700987502169","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71GLdc7DoCL.jpg?v=1778621121"},{"product_id":"pair-of-soundxtreme-5x7-6x8-in-3-way-350-watts-coaxial-car-speakers-4-ohm-2-speakers","title":"SoundXtreme ST-680 5x7\/6x8\" 3-Way Coaxial Speakers","description":"\u003cp\u003eThe SoundXtreme ST-680 is a pair of 5x7\/6x8-inch 3-way coaxial car speakers designed as a practical replacement for worn or underperforming factory door or rear-deck speakers. Their dual-fit sizing is intended for vehicles that use either a 5x7-inch or 6x8-inch speaker opening. The pair uses a 4-ohm design for connection to compatible car-audio systems.\u003c\/p\u003e\u003cp\u003eThese speakers are suited to everyday listeners who want a straightforward full-range speaker upgrade without adding separate tweeters or external crossovers. The coaxial layout places the high-frequency driver within the woofer assembly, keeping installation comparatively simple. A 3-way architecture combines the mid-woofer and tweeter elements in each speaker assembly.\u003c\/p\u003e\u003cp\u003eThe ST-680 is specified for 350 watts peak power per pair, with a recommended amplifier range of 10 to 75 watts RMS per channel. Its 90 dB sensitivity and 45 Hz to 20,000 Hz frequency-response specification describe a speaker intended to cover bass, vocal, and treble ranges in a conventional car-audio setup. Power should be matched to the stated RMS recommendation rather than the peak rating.\u003c\/p\u003e\u003cp\u003eA polypropylene mid-woofer cone works with a polyester-foam surround, while the high-frequency section uses a 1\/2-inch PEI balanced-dome tweeter. The speaker also uses a neodymium motor structure and a stamped-steel basket. SoundXtreme lists EVC, or Extended Voice Coil, technology as part of the speaker design.\u003c\/p\u003e\u003cp\u003eThe ST-680 can be used with a compatible factory radio or aftermarket head unit, or with an amplifier that delivers suitable power at 4 ohms. It is a sensible option when replacing speakers in vehicles with compatible 5x7-inch or 6x8-inch mounting locations. Confirm the vehicle opening, mounting clearance, wiring connection, and speaker polarity before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Fit 5x7\/6x8 Size:\u003c\/strong\u003e Supports compatible oval speaker locations in either common size format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Integrates multiple driver elements within each speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches many conventional car-audio speaker circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Adds a dedicated high-frequency driver for treble reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Mid-Woofer:\u003c\/strong\u003e Provides the primary cone for midrange and lower-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Provides a rigid structural frame for speaker mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ST-680 combines a polypropylene mid-woofer cone, polyester-foam surround, 1\/2-inch PEI balanced-dome tweeter, neodymium motor structure, and stamped-steel basket. These materials form a conventional coaxial speaker construction with the tweeter integrated into the main speaker assembly. The listed frequency response is 45 Hz to 20,000 Hz, and listed sensitivity is 90 dB.\u003c\/p\u003e\u003cp\u003eVerify that the vehicle accepts a 5x7-inch or 6x8-inch speaker and that the opening supports the stated 5 x 7-3\/16-inch cutout dimensions. The listed top-mount depth is 3\/8 inch, but installers should measure available clearance at the intended location before fitting the speakers. The package is listed with speaker wire, screws, and a user manual; use correct polarity and connect only to a compatible 4-ohm audio source.\u003c\/p\u003e","brand":"SOUNDXTREME","offers":[{"title":"Default Title","offer_id":45686781903039,"sku":"704129646667","price":39.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81jlhU4HpFL.jpg?v=1780606711"},{"product_id":"crunch-cs5768cx","title":"Crunch CS5768CX 5x7\"\/6x8\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Crunch CS5768CX is a pair of 5 x 7-inch coaxial car speakers designed to also fit many 6 x 8-inch speaker locations. It provides a practical replacement path for worn or basic factory speakers while retaining a conventional full-range coaxial layout. Each speaker combines a midrange\/woofer driver and tweeter in one assembly for straightforward installation.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for drivers who need to confirm both mounting space and power compatibility before upgrading. Their 4-ohm impedance suits common car-audio speaker circuits, while the 50-watt RMS rating per speaker gives an amplifier-matching reference beyond the peak-power figure. Check the vehicle's factory opening, cutout, mounting depth, and connector arrangement before installation.\u003c\/p\u003e\u003cp\u003eThe CS5768CX uses a 1-inch Neo-Mylar soft-dome tweeter to reproduce upper-frequency detail alongside the main cone. Its published frequency response is 60 Hz to 20 kHz, covering the primary range expected from a full-range door or rear-deck speaker. For a system needing more low-frequency output, these speakers can be paired with a properly configured subwoofer and amplifier.\u003c\/p\u003e\u003cp\u003eA silver alpha-cellulose cone works with a moisture-resistant rubber surround to support everyday automotive use. The speaker also uses an anti-resonant stamped-steel basket, a ferrite magnet motor, and a pure-copper voice coil on a Kapton former. These construction details focus on maintaining the driver's structure and managing heat during operation.\u003c\/p\u003e\u003cp\u003eThe CS5768CX is supplied as a pair, making it suited to replacing two factory speaker positions at once. It can be used with a compatible factory radio or aftermarket source unit, provided the system's power and fitment are appropriate. Spade terminals and included connection cables support conventional speaker wiring during an installation or refresh.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5x7\/6x8 Fitment:\u003c\/strong\u003e Designed for 5 x 7-inch openings and many 6 x 8-inch locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Integrates the tweeter and main driver in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Neo-Mylar Tweeter:\u003c\/strong\u003e Handles high-frequency reproduction with a soft-dome design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlpha-Cellulose Cone:\u003c\/strong\u003e Provides the main driver's cone structure for midrange and bass duties.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber Surround:\u003c\/strong\u003e Adds moisture resistance at the cone edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches the standard impedance used by many car-audio systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CS5768CX uses a stamped-steel basket, ferrite magnet motor, pure-copper voice coil with Kapton former, epoxy-infused natural-fiber spider, textured ABS gasket, and over-coil cooling design. Its silver alpha-cellulose cone is paired with a moisture-resistant rubber surround, while the centrally mounted Neo-Mylar soft-dome tweeter completes the coaxial layout. Spade speaker terminals provide the primary connection point.\u003c\/p\u003e\u003cp\u003eMeasure the available installation space before purchase: the published top-mount depth is 2 inches and the published cutout dimension is 4.99 x 7.10 inches. Use the included mounting screws, clips, and speaker connection cables as applicable, and observe positive\/negative polarity when connecting the red and black leads. Confirm clearance behind the panel for the speaker, window mechanism, wiring, and other moving parts before fastening it in place.\u003c\/p\u003e","brand":"CRUNCH","offers":[{"title":"Default Title","offer_id":45759996919999,"sku":"CS5768CX","price":19.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71ozhu19OnL.jpg?v=1782104997"},{"product_id":"kenwood-kfc-c5798rs","title":"Kenwood KFC-C5798RS 5x7\" 2-Way Car Speakers","description":"\u003cp\u003eThe Kenwood KFC-C5798RS is a pair of 5x7-inch oval, 2-way car speakers designed for replacing compatible factory-installed speakers. They provide a practical upgrade path for vehicles needing clearer full-range sound without changing the vehicle’s speaker locations. Their 4-ohm design is suited to use with a compatible car stereo or amplifier.\u003c\/p\u003e\u003cp\u003eWith 80 watts RMS power handling and 320 watts peak input power, these speakers are intended for everyday music playback in a vehicle audio system. Their 88 dB sensitivity helps them make effective use of available amplifier power. The specified 69 Hz to 20 kHz frequency response covers bass, midrange, and high-frequency content in one coaxial speaker assembly.\u003c\/p\u003e\u003cp\u003eA polypropylene woofer cone with Kenwood’s Diamond Array Pattern forms the low- and mid-frequency section of the speaker. The patterned cone is designed to reduce distortion, while the rubber surround supports durable cone movement. A steel basket provides the structural base for the woofer assembly.\u003c\/p\u003e\u003cp\u003eThe integrated 30 mm balanced-dome tweeter handles upper-frequency detail. Kenwood’s Sound Field Enhancer is shaped to direct sound forward and broaden the sound field at higher frequencies. The Acoustic Sound Harmonizer controls sound waves from the woofer through the tweeter panel to support smoother response.\u003c\/p\u003e\u003cp\u003eThe KFC-C5798RS is built for custom-fit installation where its physical dimensions match the vehicle’s mounting location. Its low 5\/16-inch tweeter height is designed to help it fit many factory speaker positions. It can serve as a direct speaker replacement or as part of a larger system upgrade with a compatible receiver, amplifier, and vehicle-specific installation hardware.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e80W RMS Power Handling:\u003c\/strong\u003e Supports use with compatible factory radios or amplified systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5x7-Inch Oval Format:\u003c\/strong\u003e Fits applications requiring a 5x7-inch speaker footprint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiamond Array PP Cone:\u003c\/strong\u003e Patterned polypropylene woofer helps reduce distortion during playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced-Dome Tweeter:\u003c\/strong\u003e Adds dedicated high-frequency reproduction in a coaxial design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic Sound Harmonizer:\u003c\/strong\u003e Helps manage woofer sound waves for smoother response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound Field Enhancer:\u003c\/strong\u003e Shapes high-frequency output for a wider forward sound field.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-C5798RS uses a black polypropylene woofer cone, rubber surround, steel basket, and steel top plate\/yoke. The woofer uses a ferrite magnet, while the 30 mm balanced-dome tweeter uses a neodymium magnet. Kenwood also applies black paint to the yoke and plate to help release heat within the magnetic circuit.\u003c\/p\u003e\u003cp\u003eBefore purchase, compare the vehicle’s opening with the required 4-7\/8 by 7-3\/16-inch cutout and verify the available 2-1\/16-inch mounting depth. The speaker measures 8-11\/16 inches wide, 5-1\/2 inches high, and 2-3\/8 inches deep without the grille. Use vehicle-appropriate mounting hardware and wiring connections, and match the speakers to a compatible 4-ohm audio source.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":45766412927167,"sku":"KFC-C5798RS","price":56.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61TPhXxOuiL.jpg?v=1782246047"},{"product_id":"rockford-fosgate-tms57","title":"Rockford Fosgate TMS57 5x7 Harley-Davidson Bag Lid Speakers","description":"\u003cp\u003eThe Rockford Fosgate TMS57 is a pair of 5x7-inch, two-way coaxial speakers made as a replacement for compatible Harley-Davidson factory bag-lid speaker locations. It is intended for motorcycles equipped with factory BOOM! Audio or BOOM! Audio Stage-I saddlebag speaker systems using the 5x7-inch format. This upgrade replaces the existing speakers while retaining the motorcycle-specific mounting approach.\u003c\/p\u003e\u003cp\u003eWith a 4-ohm nominal impedance and 100-watt RMS power-handling rating, the TMS57 is designed for motorcycle audio systems that need stronger output capability than basic replacement speakers. Its 63 Hz to 20 kHz rated frequency response covers bass and midrange fundamentals along with extended high frequencies. The two-way coaxial layout keeps the woofer and tweeter in one compact assembly for bag-lid installation.\u003c\/p\u003e\u003cp\u003eThe speaker uses a carbon-fiber-reinforced polypropylene cone with a co-molded Santoprene VAST surround. A 35.6 mm voice coil and neodymium dual-magnet motor structure support its power handling in a compact design. High frequencies are handled by a 25 mm proprietary film dome tweeter with an integrated phase plug.\u003c\/p\u003e\u003cp\u003eFor exposed motorcycle use, the TMS57 is built with Rockford Fosgate's Element Ready design. Its construction includes a Santoprene front isolation spider between the tweeter housing and cone assembly, along with a poly-cotton spider and glass-reinforced polymer frame. These materials are selected to help address moisture, UV exposure, temperature changes, corrosion, vibration, and road conditions.\u003c\/p\u003e\u003cp\u003eThe TMS57 supports older and newer Harley-Davidson wiring arrangements with integrated spade terminals and a Deutsch-style factory connector. It is intended for compatible factory BOOM! Audio and BOOM! Audio Stage-I bag-lid locations, not BOOM! Audio Stage-II systems. Pair it with an amplifier or source channel matched for a 4-ohm speaker load and its 100-watt RMS rating.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5x7-Inch Factory Replacement:\u003c\/strong\u003e Fits compatible Harley-Davidson BOOM! Audio bag-lid speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in one compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-Watt RMS Rating:\u003c\/strong\u003e Supports higher-output motorcycle audio system upgrades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElement Ready Construction:\u003c\/strong\u003e Uses weather-resistant materials for exposed motorcycle environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 mm Dome Tweeter:\u003c\/strong\u003e Adds detailed high-frequency reproduction through an integrated coaxial design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Connector Support:\u003c\/strong\u003e Accommodates older terminals and newer Deutsch-style Harley-Davidson connectors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TMS57 uses a carbon-fiber-reinforced polypropylene cone, co-molded Santoprene VAST surround, poly-cotton spider, and Santoprene front isolation spider. Its low-profile coaxial tweeter assembly includes a neodymium tweeter motor, integrated phase plug, ASA grille, and concealed tweeter wire. An integrated 6 dB crossover with a high-power polyester capacitor is built into the speaker.\u003c\/p\u003e\u003cp\u003eConfirm that the motorcycle has a compatible factory 5x7-inch BOOM! Audio or BOOM! Audio Stage-I bag-lid speaker location before ordering. The speakers have a 2.2-inch mounting depth and use either integrated spade terminals for 2013-and-earlier motorcycles or a Deutsch-style connector for 2014-and-newer motorcycles. The package includes a pair of speakers and mounting screws; grilles or trim rings are not included.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768051949759,"sku":"TMS57","price":285.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61RxOOTB6TL.jpg?v=1782270603"},{"product_id":"rockford-fosgate-hd14cvo-stg2","title":"Rockford Fosgate HD14CVO-STG2 6.5\"\/5x7\" Harley Audio Kit","description":"\u003cp\u003eThe Rockford Fosgate HD14CVO-STG2 is a four-speaker motorcycle audio upgrade kit for select Harley-Davidson CVO Street Glide and CVO Road Glide models. It combines fairing speakers, saddlebag-lid speakers, a four-channel amplifier, and a vehicle-specific installation kit. The system is intended for riders who want an integrated audio upgrade while retaining the factory Harley-Davidson radio.\u003c\/p\u003e\u003cp\u003eThe kit includes two TMS65 6.5-inch two-way fairing speakers and two TMS57 5x7-inch two-way saddlebag speakers. Its M5-800X4 amplifier provides dedicated channels for the front and rear speaker pairs. The speaker set is engineered for motorcycle use, where wind, road, and exhaust noise can make factory audio difficult to hear.\u003c\/p\u003e\u003cp\u003eThe TMS65 fairing speakers use carbon-fiber-reinforced polypropylene cones, Santoprene surrounds, and 25 mm dome tweeters. The TMS57 bag-lid speakers use a similar weather-resistant design with 25 mm dome tweeters and 5x7-inch factory-replacement fitment. Both speaker models are 4-ohm designs with built-in tweeter crossovers.\u003c\/p\u003e\u003cp\u003eAt the center of the kit is the IPX6-rated M5-800X4 Class-AD amplifier. It is rated for 100 watts RMS per channel at either 4 or 2 ohms, with four channels available for the included speakers. Variable high-pass and low-pass filters, a Punch EQ control, and C.L.E.A.N. clip indicators support setup and tuning.\u003c\/p\u003e\u003cp\u003eThe included RFK-HD14M5 installation package is designed around select Harley-Davidson factory mounting points and wiring connections. It supplies the amplifier bracket, heatsink, vehicle-specific harnesses, power wiring, bypass plugs, and hardware. The factory Harley-Davidson radio must be flashed for use with this kit to prevent distortion and potential speaker damage.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Speaker System:\u003c\/strong\u003e Includes two 6.5-inch fairing speakers and two 5x7-inch bag-lid speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM5-800X4 Amplifier:\u003c\/strong\u003e Four-channel Class-AD power supports separate front and rear speaker channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElement Ready Construction:\u003c\/strong\u003e Speakers and amplifier are designed for motorcycle exposure to weather and vibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX6 Amplifier Rating:\u003c\/strong\u003e The amplifier is protected against powerful water jets from any direction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory-Style Integration:\u003c\/strong\u003e Direct-connect harnesses reduce the need to cut factory wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadio Flash Requirement:\u003c\/strong\u003e Factory radio flashing is required before operating the upgraded system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TMS65 and TMS57 speakers use reinforced polypropylene cones, Santoprene suspension components, neodymium motor systems, and integrated tweeter assemblies. The M5-800X4 uses an Element Ready chassis, conformal-coated circuit boards, heavy-duty molded connectors, and a die-cast aluminum heatsink. These components are designed for the vibration, moisture, UV exposure, and limited installation space associated with touring motorcycles.\u003c\/p\u003e\u003cp\u003eThis kit is intended for compatible factory-radio Harley-Davidson CVO applications with standard-size ABS plastic saddlebags and factory 5x7-inch bag lids. The RFK-HD14M5 provides a mounting bracket, heatsink, T-harness, power harness, amplifier-output harnesses, fairing harness, Y-adapters, bypass plugs, and mounting hardware. Confirm motorcycle fitment, factory audio configuration, and radio-flashing availability before purchase; professional installation and tuning are recommended.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768059519167,"sku":"HD14CVO-STG2","price":1498.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61fpc720X6L.jpg?v=1782270742"},{"product_id":"hertz-dcx570-3","title":"Hertz DCX570-3 5x7\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Hertz DCX570-3 is a pair of 5 x 7-inch, two-way coaxial car speakers designed for factory-speaker replacement and straightforward system upgrades. Its integrated tweeter and woofer arrangement places the main drivers in one compact assembly. This approach helps bring full-range playback to vehicles that use a 5 x 7-inch speaker location.\u003c\/p\u003e\u003cp\u003eWith 60 watts continuous power handling and a 4-ohm nominal impedance, these speakers are suited to compatible factory radios or external car-audio amplification. The 93 dB SPL sensitivity specification supports efficient output from appropriately matched equipment. Their published frequency response spans 60 Hz to 21 kHz.\u003c\/p\u003e\u003cp\u003eThe DCX570-3 uses a water-repellent pressed-paper woofer cone with a TPU surround. This combination is paired with a 25 mm pure-copper mobile voice coil wound on a Conex former. A high-density-flux ferrite woofer magnet supports the motor assembly.\u003c\/p\u003e\u003cp\u003eHigh frequencies are handled by a 15 mm tweeter using a neodymium magnet and PEI dome. The speaker includes a built-in crossover, so a separate external passive crossover is not specified for normal operation. Its coaxial layout keeps the installation focused around one speaker mounting position per channel.\u003c\/p\u003e\u003cp\u003eFor a practical upgrade, the DCX570-3 can be used as a matched left\/right pair in a compatible 5 x 7-inch location. Verify vehicle-specific mounting dimensions, mounting-hole pattern, depth clearance, and wiring connections before purchase. Pairing the speakers with a source unit or amplifier that is compatible with their 4-ohm load and power rating helps create an appropriate system match.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 x 7-Inch Woofer:\u003c\/strong\u003e Fits applications designed for this speaker size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W Continuous Power:\u003c\/strong\u003e Supports appropriately matched factory or amplified systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Uses treated pressed paper for the woofer cone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Handles high frequencies with a compact 15 mm dome.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Crossover:\u003c\/strong\u003e Integrates frequency division within the coaxial speaker.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DCX570-3 combines a high-density-flux ferrite woofer magnet with a neodymium tweeter magnet. Its construction includes a TPU surround, pure-copper voice coil on a Conex former, tin-plated high-current terminals, and silver-plated lead wires. Hertz also specifies an abrasion-resistant painted basket, butyl-rubber protective cover, epoxy bonding between basket and motor system, and low-carbon-content plates.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 5 x 7-inch speaker and that its available depth meets the 66 mm mounting-depth specification. Check the supplied mounting drawing dimensions against the factory opening, as adapters, brackets, hardware, or wiring connections may be vehicle-specific. Connect each speaker to a compatible 4-ohm channel and observe the power limits of the complete audio system.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":45771449696447,"sku":"DCX570-3","price":93.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61ckpOJyjtL.jpg?v=1782362637"},{"product_id":"hertz-cx570","title":"Hertz CX 570 5x7\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Hertz CX 570 is a 5x7-inch, 2-way coaxial speaker designed for vehicle speaker locations that need a compact full-range replacement. Its integrated woofer and tweeter arrangement simplifies an upgrade where separate component speakers are not practical. With a 4-ohm impedance and 70-watt continuous power handling, it can be used with compatible factory or aftermarket audio systems.\u003c\/p\u003e\u003cp\u003eThis speaker is intended for listeners replacing worn factory 5x7-inch speakers or building a straightforward aftermarket system. The 55 Hz to 22 kHz frequency-response rating covers bass, midrange, and treble reproduction from a single speaker location. Its 93.5 dB sensitivity rating supports useful output from moderate-power amplification.\u003c\/p\u003e\u003cp\u003eA 24 mm Tetolon dome tweeter handles high frequencies and is cooled with ferrofluid. Hertz uses its RHFC Rotary High Frequency Contour design to allow the tweeter to be directed toward the listening position. The high-frequency system is also adjustable to help account for different off-axis factory speaker placements.\u003c\/p\u003e\u003cp\u003eThe woofer uses an SPP-M semi-pressed paper and mica cone, selected for a balance of low mass and damping. A 25 mm woofer voice coil uses an aluminum former, while the woofer motor uses a high-density-flux ferrite magnet with low-carbon polar plates. The four-spoke basket and rubber magnet cover are designed to help limit unwanted vibration.\u003c\/p\u003e\u003cp\u003eThe CX 570 works well as a direct speaker-location upgrade where a 5x7-inch opening and adequate depth are available. Its 65.5 mm mounting depth and 182 x 126.5 mm cutout requirement should be checked against the vehicle before purchase. For a more complete system, it can be paired with compatible amplification, a properly configured source unit, and vehicle-specific mounting or wiring accessories as needed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter functions in one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 mm Tetolon Tweeter:\u003c\/strong\u003e Provides high-frequency reproduction with a soft fiber dome.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRHFC Directable Tweeter:\u003c\/strong\u003e Lets the tweeter be aimed toward the listening area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPP-M Woofer Cone:\u003c\/strong\u003e Semi-pressed paper and mica construction balances damping and weight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70W Continuous Handling:\u003c\/strong\u003e Supports compatible aftermarket amplification and source-unit power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches many common car-audio speaker outputs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CX 570 uses a high-density-flux ferrite woofer magnet, a neodymium tweeter magnet, and a Tetolon dome. Its semi-pressed paper and mica woofer cone is paired with a 25 mm aluminum-former voice coil. The compact four-spoke basket includes a rubber magnet cover intended to damp spurious vibrations.\u003c\/p\u003e\u003cp\u003eConfirm the available opening, mounting depth, and panel clearance before installation. The speaker measures 221 x 139.5 mm overall, requires a 182 x 126.5 mm cutout, and has a 65.5 mm mounting depth. Use correct polarity when connecting speaker wire, and verify whether vehicle-specific brackets, harness adapters, or grilles are needed for the intended location.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":45771450974399,"sku":"CX570","price":129.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71LsIcx-fCL.jpg?v=1782362700"},{"product_id":"audison-apk570","title":"Audison APK570 5 x 7\" 2-Way Component Speakers","description":"\u003cp\u003eThe Audison APK570 is a 2-way component speaker system designed for vehicles with factory 5 x 7-inch elliptical door-speaker locations. It combines AP 570 woofers, AP 1 tweeters, and dedicated APCX TW 570 passive crossovers. This kit is intended for replacing factory door speakers while retaining a separate tweeter layout.\u003c\/p\u003e\u003cp\u003eWith 100 watts continuous and 300 watts peak power handling, the APK570 is suited to amplified systems as well as compatible factory or aftermarket head-unit upgrades. Its 4-ohm nominal impedance supports common car-audio amplification configurations. The rated 55 Hz to 20 kHz frequency response covers midbass through high-frequency reproduction.\u003c\/p\u003e\u003cp\u003eThe AP 570 woofer uses a 32 mm pure-copper voice coil and a water-repellent treated paper cone. Its cone profile was developed with FEM simulation and optimized using Klippel R\u0026amp;D Scan Vibrometer measurement. A Triple Wave surround is used to support linear cone excursion.\u003c\/p\u003e\u003cp\u003eThe separate AP 1 tweeter uses a 26 mm diaphragm with a wide-roll surround. Its acoustic lens is designed to address in-car response effects in the 10 kHz to 13 kHz range associated with challenging OEM tweeter placements. The dedicated crossover routes high frequencies to the tweeter at a specified 3 kHz high-pass point.\u003c\/p\u003e\u003cp\u003eFor OEM-focused installation, the APK570 uses a compact woofer basket and reduced mounting depth. High-current double-contact Faston terminals simplify woofer and tweeter connections, while the compact crossover includes selectable tweeter attenuation. It is a practical option when a vehicle already accommodates 5 x 7-inch door woofers and separate tweeters.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 x 7-Inch Component System:\u003c\/strong\u003e Fits vehicles designed for elliptical 5 x 7-inch door woofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Continuous Power:\u003c\/strong\u003e Supports substantial power in an appropriately matched system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAP 1 Separate Tweeters:\u003c\/strong\u003e Provides dedicated high-frequency reproduction outside the woofer location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated Passive Crossovers:\u003c\/strong\u003e Directs high frequencies to the tweeters at 3 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Level Adjustment:\u003c\/strong\u003e Offers 0 dB or +2 dB attenuation selection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Helps suit the woofer to door-mounted use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 570 woofer combines a treated paper cone, Triple Wave surround, pure-copper voice coil, and compact coated basket. Its motor is secured with damping epoxy adhesive, while the AP 1 tweeter uses a wide-roll surround and acoustic lens. The crossover is compact and includes Faston connectors intended to reduce connection errors.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle has suitable 5 x 7-inch woofer openings and provisions for separate tweeters before installation. Use the included dedicated APCX TW 570 crossovers between the audio source or amplifier and the individual woofer and tweeter connections. Match the system to a compatible 4-ohm amplifier or speaker output and observe the 100-watt continuous power rating when setting amplifier gain.\u003c\/p\u003e","brand":"AUDISON","offers":[{"title":"Default Title","offer_id":45771454283967,"sku":"APK570","price":237.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71aKwGyxdOL.jpg?v=1782363019"},{"product_id":"audison-apx570","title":"Audison APX570 5 x 7\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Audison APX570 is a pair of 5 x 7-inch, 2-way coaxial car speakers designed for replacement or upgrade use in compatible factory speaker locations. Its coaxial layout combines the woofer and tweeter into one assembly, helping simplify installations where separate tweeter mounting is not practical. With a 4-ohm impedance and 70-watt continuous power handling, it is suited to systems using a compatible factory radio or aftermarket amplification.\u003c\/p\u003e\u003cp\u003eA concentric 24 mm tweeter is positioned within the woofer so both drivers share a single point of sound emission. This arrangement is intended to support a more consistent phase response between high and low frequencies. An integrated acoustic lens is used to help maintain a linear response when the speakers are installed off-axis in vehicle doors.\u003c\/p\u003e\u003cp\u003eThe APX570 uses a water-repellent treated paper cone and a TPU surround with Audison's shallow Triple Wave profile. The surround profile is engineered to support linear cone excursion, while the 32 mm pure-copper woofer voice coil is designed for power handling and low-frequency control. Its published frequency response is 60 Hz to 23 kHz, with 93 dB sensitivity.\u003c\/p\u003e\u003cp\u003eFor OEM-oriented installations, the APX570 uses a compact, low-profile basket and a 63 mm mounting depth. The oval 5 x 7-inch format can suit vehicles equipped for this speaker shape, provided the factory opening, mounting pattern, window clearance, and connector arrangement are checked before installation. The speakers use high-current fast-on terminals with double contacts for both positive and negative connections.\u003c\/p\u003e\u003cp\u003eThese speakers can be used as a direct coaxial replacement where a compact all-in-one design is preferred over a separate component system. They are a practical match for listeners seeking an Audison Prima-series speaker upgrade without adding external tweeters or crossover housings. Grilles are not included, so installations behind factory door panels or with separately sourced grilles should be planned accordingly.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Layout:\u003c\/strong\u003e Combines woofer and tweeter in one compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcentric 24 mm Tweeter:\u003c\/strong\u003e Uses a single emission point for consistent driver alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70W Continuous Handling:\u003c\/strong\u003e Supports compatible amplified car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple Wave TPU Surround:\u003c\/strong\u003e Helps support linear cone movement during excursion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Adds moisture resistance for typical door installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Basket:\u003c\/strong\u003e Supports OEM-oriented installation with a 63 mm mounting depth.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APX570 has a water-repellent treated paper cone, TPU surround, and 32 mm pure-copper voice coil. Its compact basket has an abrasion-resistant, scratch-proof coating, while the motor is secured with damping epoxy adhesive. The centered tweeter incorporates an acoustic lens, and the speaker was developed using the KLIPPEL suite.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts 5 x 7-inch speakers and compare the factory opening with the APX570's 182 x 126 mm mounting-hole dimensions before ordering. Allow for the published 63 mm mounting depth and verify clearance behind the mounting surface, including window travel in doors. Use the double-contact fast-on terminals with correct polarity, and note that grilles are not included.\u003c\/p\u003e","brand":"AUDISON","offers":[{"title":"Default Title","offer_id":45771455201471,"sku":"APX570","price":137.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71ywmFTbmVL.jpg?v=1782363071"},{"product_id":"hifonics-hcc5768cx","title":"Hifonics HCC5768CX 5x7\/6x8-Inch Coaxial Speakers","description":"\u003cp\u003eThe Hifonics Colossus Classic HCC5768CX is a pair of 5x7-inch coaxial car speakers designed to also fit many 6x8-inch factory locations. They provide a practical replacement path for worn or basic factory speakers while retaining a conventional 4-ohm load for broad car-audio compatibility. Each speaker combines a woofer and tweeter in one assembly for straightforward full-range installation.\u003c\/p\u003e\u003cp\u003eWith 65 watts RMS and 125 watts peak power handling per speaker, the HCC5768CX is suited to aftermarket head units as well as appropriately matched external amplification. Its 88 dB sensitivity supports useful output without requiring an unusually large amplifier. The specified 80 Hz to 20 kHz frequency response covers midrange and treble duties, while a subwoofer can be added for deeper low-frequency reinforcement if desired.\u003c\/p\u003e\u003cp\u003eA blue woven-fiber woofer cone is paired with a 1-inch aluminum dome tweeter to reproduce midrange detail and high-frequency content. The butyl-rubber surround supports cone movement and is selected for durability in an automotive environment. A passive Butterworth crossover directs frequencies between the woofer and tweeter for a cohesive two-way design.\u003c\/p\u003e\u003cp\u003eThe speaker motor uses a ferrite magnet, pure-copper voice coil, and Kapton former assembly. An overcoil cooling design and epoxy-infused natural-fiber spider are incorporated to support consistent operation during extended listening. Braided tinsel leads connect the moving assembly while helping maintain reliable signal transfer.\u003c\/p\u003e\u003cp\u003eFor an upgrade system, the HCC5768CX can be used as a direct-replacement pair in compatible doors, rear decks, or other factory 5x7\/6x8 locations. Its 2.13-inch top-mount depth and 8.60 by 5.56-inch cutout requirement should be checked against the vehicle before installation. Use the speakers with clean, properly set power and retain factory grilles where applicable, as grilles are not included.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5x7\/6x8 Fitment:\u003c\/strong\u003e Fits 5x7-inch openings and many 6x8-inch speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Layout:\u003c\/strong\u003e Integrates woofer and tweeter in each speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e65W RMS Per Speaker:\u003c\/strong\u003e Supports appropriately matched factory or aftermarket power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Dome Tweeter:\u003c\/strong\u003e Handles high-frequency detail through the specified 20 kHz range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoven-Fiber Woofer Cone:\u003c\/strong\u003e Provides the main midrange and mid-bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eButyl-Rubber Surround:\u003c\/strong\u003e Supports cone travel with a durable surround material.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe HCC5768CX uses an anti-resonant stamped-steel basket, ferrite magnet structure, woven-fiber cone, butyl-rubber surround, and 1-inch aluminum dome tweeter. Its copper voice coil is built on a Kapton former, while the natural-fiber spider is epoxy infused. The coaxial design also incorporates a passive Butterworth crossover and braided tinsel leads.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 5x7-inch or 6x8-inch speaker and has at least 2.13 inches of mounting depth before purchase. The required cutout is 8.60 by 5.56 inches, and wiring may be connected using the speaker's spade terminals or by soldering. The package includes two speakers; no speaker grilles are included.\u003c\/p\u003e","brand":"HIFONICS","offers":[{"title":"Default Title","offer_id":45776300638399,"sku":"HCC5768CX","price":22.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71gR1KmtILL.jpg?v=1782490456"},{"product_id":"hifonics-zs5768cx","title":"Hifonics ZS5768CX 5x7\/6x8\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Hifonics ZS5768CX is a pair of 5x7\/6x8-inch two-way coaxial car speakers designed for replacing compatible factory door, rear-deck, or panel-mounted speakers. They provide a straightforward upgrade path for vehicles using this common oval speaker format. A supplied 6x8-inch adapter plate helps support installation in applicable 6x8-inch locations.\u003c\/p\u003e\u003cp\u003eEach speaker is rated for 90 watts RMS and 250 watts peak power handling at 4 ohms. With an 88 dB sensitivity rating and a 46 Hz to 20 kHz frequency response, the pair is suited to factory-radio replacement systems as well as properly matched aftermarket amplification. The coaxial layout places the tweeter within the woofer assembly to combine midrange, bass, and high-frequency reproduction in one mounting position.\u003c\/p\u003e\u003cp\u003eThe sound design combines an Alpha-Cellulose poly woofer cone with a 1-inch Neo-Mylar soft-dome tweeter. The rigid, lightweight cone is intended to support responsive midbass performance, while the soft-dome tweeter handles upper-frequency detail. A passive Butterworth crossover directs frequencies between the woofer and tweeter for a controlled transition.\u003c\/p\u003e\u003cp\u003eHifonics uses a pure-copper voice coil on a lightweight Kapton former, with an overcoil cooling arrangement that exchanges air through the spider area. The epoxy-infused natural-fiber spider is designed to balance flexibility with structural support. A ferrite magnet motor and stamped-steel basket provide the foundation for the speaker assembly.\u003c\/p\u003e\u003cp\u003eThe ZS5768CX is a practical choice for listeners upgrading worn or limited factory speakers without moving to a separate component-speaker system. Its moisture-resistant rubber surround and high-temperature adhesive support use in typical vehicle environments. Pair it with a compatible 4-ohm factory or aftermarket audio channel, while confirming vehicle-specific mounting depth, cutout, and wiring requirements before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5x7\/6x8-Inch Fitment:\u003c\/strong\u003e Fits the stated speaker size category and includes a 6x8-inch adapter plate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Integrates the woofer and tweeter into each speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90W RMS Handling:\u003c\/strong\u003e Supports 90 watts RMS and 250 watts peak per speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeo-Mylar Tweeter:\u003c\/strong\u003e A 1-inch soft-dome tweeter delivers high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlpha-Cellulose Woofer Cone:\u003c\/strong\u003e Lightweight, rigid cone material supports responsive midbass performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Butterworth Crossover:\u003c\/strong\u003e Helps transition frequencies between the woofer and tweeter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThese speakers use an anti-resonant stamped-steel basket, ferrite magnet motor, pure-copper voice coil, Kapton former, and epoxy-infused natural-fiber spider. The woofer uses an Alpha-Cellulose cone with a moisture-resistant rubber surround and high-temperature adhesive. No speaker grilles are included, reflecting their intended use in many factory replacement locations where the vehicle already provides a grille.\u003c\/p\u003e\u003cp\u003eConfirm that your vehicle accepts 5x7-inch or 6x8-inch speakers and verify both the mounting cutout and depth before ordering. The listed chassis depth is 2.13 inches, and the quick-start guide lists a 4.92 x 7.09-inch cutout measurement. Use the included 6x8-inch adapter plate where appropriate, connect using the spade terminals or soldered connections, and match the speakers to a compatible 4-ohm audio channel.\u003c\/p\u003e","brand":"HIFONICS","offers":[{"title":"Default Title","offer_id":45776314040511,"sku":"ZS5768CX","price":18.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61MiAouC2wL.jpg?v=1782490542"},{"product_id":"mb-quart-xk2-168","title":"MB Quart XK2-168 5x7\/6x8-Inch Coaxial Speakers","description":"\u003cp\u003eThe MB Quart XK2-168 is a pair of 5x7\/6x8-inch two-way coaxial car speakers designed for replacing compatible factory door speakers. Its dual-size fit is intended to help simplify upgrades in vehicles that use either 5x7-inch or 6x8-inch speaker openings. The system is suited to drivers seeking a straightforward full-range speaker upgrade without moving to a separate-component design.\u003c\/p\u003e\u003cp\u003eRated at 100 watts RMS and 200 watts peak power per pair, the XK2-168 is designed to work with an appropriately matched car-audio system. The published 55Hz-22kHz frequency response covers bass, midrange, and high-frequency content within a single coaxial assembly. An 88dB sensitivity rating provides a useful reference point when matching the speakers with a head unit or external amplifier.\u003c\/p\u003e\u003cp\u003eThis is a two-way coaxial speaker system, meaning its drivers are integrated into each speaker assembly. That layout keeps the installation focused on replacing a compatible existing speaker location rather than adding separate tweeter mounting positions. It can be a practical choice for door-speaker upgrades where space and installation simplicity matter.\u003c\/p\u003e\u003cp\u003eThe XK2-168 is specified for both 5x7-inch and 6x8-inch openings, giving it flexibility across compatible vehicle applications. Its published 5.67-inch cutout diameter and 2.13-inch mounting depth from the flange should be checked against the vehicle's available opening and window clearance before installation. Confirming these dimensions in advance helps avoid fitment issues behind the door panel.\u003c\/p\u003e\u003cp\u003eFor a balanced upgrade, pair the speakers with a source unit or amplifier whose power delivery is appropriate for the 100-watt RMS-per-pair rating. They are intended for wired car-audio use and can serve as replacements for factory speakers in compatible locations. Vehicle-specific mounting adapters, harnesses, or hardware may be needed depending on the factory installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Size Fit:\u003c\/strong\u003e Fits compatible 5x7-inch and 6x8-inch speaker openings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Integrates drivers into each speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W RMS Per Pair:\u003c\/strong\u003e Supports appropriately matched car-audio power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200W Peak Per Pair:\u003c\/strong\u003e Provides published short-term peak handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e55Hz-22kHz Response:\u003c\/strong\u003e Covers a wide published frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Mounting Profile:\u003c\/strong\u003e Uses a 5.67-inch cutout and 2.13-inch depth.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe XK2-168 uses a coaxial layout in a compact 5x7\/6x8-inch form factor. Published product information describes the speakers as built with high-quality materials, but does not identify the cone, surround, tweeter, magnet, or voice-coil materials. The design is intended for durable use in a vehicle audio installation.\u003c\/p\u003e\u003cp\u003eBefore ordering, compare the vehicle's factory speaker opening, cutout clearance, and available mounting depth with the published 5.67-inch cutout diameter and 2.13-inch depth from the flange. Use compatible vehicle-specific brackets or wiring adapters when required by the factory door location. Match the system's amplification appropriately and follow the vehicle and audio equipment installation instructions.\u003c\/p\u003e","brand":"MB QUART","offers":[{"title":"Default Title","offer_id":45776336486591,"sku":"XK2-168","price":22.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61tibKxNCXL.jpg?v=1782490787"},{"product_id":"mb-quart-rk1-168","title":"MB Quart RK1-168 5x7\/6x8-Inch 2-Way Coaxial Speakers","description":"\u003cp\u003eThe MB Quart RK1-168 is a pair of 5x7\/6x8-inch, 2-way coaxial car speakers designed as a direct-size upgrade for compatible factory speaker locations. Each speaker combines a woofer and centrally mounted tweeter in one assembly, simplifying an upgrade where separate external tweeters are not desired. The pair is rated at 4 ohms and is intended for use with compatible factory radios or aftermarket amplification.\u003c\/p\u003e\u003cp\u003eThese Reference Series speakers use lightweight craft pulp cones reinforced with bamboo fiber for midrange and bass reproduction. Their curvilinear cone profile is designed to add strength and reduce cone flex during playback. A rubber surround supports cone movement, while the red woven fiber cotton\/poly-blend spider helps stabilize the cone and voice-coil assembly.\u003c\/p\u003e\u003cp\u003eHigh frequencies are handled by 0.75-inch titanium dome tweeters with MB Quart WideSphere technology. This tweeter design is intended to provide broader off-axis high-frequency dispersion, which can be useful in door and rear-deck speaker locations where listeners are not directly in front of the speakers. An integrated 2-way crossover routes the appropriate frequencies to the woofer and tweeter.\u003c\/p\u003e\u003cp\u003eThe RK1-168 is rated for 50 watts RMS and 100 watts peak power per speaker, or 100 watts RMS and 200 watts peak for the pair. With 88 dB sensitivity and a stated 35 Hz to 20 kHz frequency response, it is suited to balanced full-range playback in a compatible vehicle installation. Power matching should be based on the continuous RMS rating rather than the peak rating.\u003c\/p\u003e\u003cp\u003eFor durability in an automotive environment, the speakers use high-temperature adhesive at the cone-to-surround connection, molded polymer sealing gaskets, and a PA66 composite frame reinforced with 30% glass fiber. Vents through the spider and frame ribs are designed to exchange air around the voice coil. This pair is a practical option for replacing compatible 5x7-inch or 6x8-inch factory speakers while retaining a conventional coaxial layout.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5x7\/6x8 Fitment:\u003c\/strong\u003e Designed for compatible oval factory speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium Dome Tweeter:\u003c\/strong\u003e Handles high frequencies with WideSphere technology.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulp\/Bamboo Fiber Cone:\u003c\/strong\u003e Supports midrange and bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover:\u003c\/strong\u003e Directs frequencies between the two drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches many car-audio speaker amplifier channels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe RK1-168 uses a craft pulp and bamboo-fiber woofer cone, rubber surround, titanium tweeter, and a PA66 composite frame with 30% glass-fiber reinforcement. High-temperature adhesive, a molded polymer gasket, a Kapton voice-coil former, and a ventilated motor\/frame structure are part of the speaker construction. Grilles are not included.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 5x7-inch or 6x8-inch speaker and verify mounting clearance before installation. The listed top-mount depth is 2 9\/16 inches and bottom-mount depth is 2 3\/4 inches, so window travel and door-panel clearance should be checked. Connect speaker polarity correctly, secure wiring away from moving parts and sharp metal edges, and use the included mounting hardware where appropriate.\u003c\/p\u003e","brand":"MB QUART","offers":[{"title":"Default Title","offer_id":45776337895615,"sku":"RK1-168","price":65.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71Er2kS8mTL.jpg?v=1782490795"},{"product_id":"jbl-stage38627am","title":"JBL STAGE38627AM 5x7\/6x8\" 2-Way Coaxial Speakers","description":"\u003cp\u003eJBL Stage3 8627 speakers are 2-way coaxial car speakers designed for factory-location upgrades in 5 x 7-inch and 6 x 8-inch applications. They provide a practical replacement path for worn or limited factory speakers while retaining a compact, vehicle-friendly form factor. Sold as a pair, they are suited to listeners building a simple speaker upgrade or refreshing an existing car audio system.\u003c\/p\u003e\u003cp\u003eThe Stage3 8627 uses a 3-ohm design and 93 dB sensitivity to make effective use of power from compatible factory radios or aftermarket amplification. With 50 watts RMS power handling per speaker and a 65 Hz to 20 kHz frequency response, it is intended to cover the main music range with clear output. Its two-way coaxial layout keeps the woofer and tweeter together for straightforward installation.\u003c\/p\u003e\u003cp\u003eJBL's Plus One polypropylene woofer cone moves the surround attachment outward to increase usable cone area. This design supports more air movement than a conventional cone of similar overall size and can improve efficiency. It is a useful feature for systems where speaker output and low-frequency presence matter without changing to a larger speaker location.\u003c\/p\u003e\u003cp\u003eAn edge-driven dome tweeter handles high-frequency detail, while the integrated crossover point is specified at 6 kHz. The result is a full-range speaker design intended to separate upper-frequency reproduction from the woofer's main duties. This makes the Stage3 8627 a suitable option for front-door, rear-door, or rear-deck locations that accept the required speaker dimensions.\u003c\/p\u003e\u003cp\u003eThe speaker uses a rigid vented basket designed to help move heat away from the motor structure and voice coil area. This cooling-oriented frame design supports reliable operation during extended listening. For a balanced upgrade, pair the speakers with a compatible head unit or amplifier that is stable with a 3-ohm speaker load and avoid sustained distorted playback.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 x 7 \/ 6 x 8 Fitment:\u003c\/strong\u003e Designed for compatible oval factory speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Woofer Cone:\u003c\/strong\u003e Uses increased cone area for efficient output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides a lightweight, durable woofer diaphragm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge-Driven Dome Tweeter:\u003c\/strong\u003e Handles high-frequency detail in the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Basket Frame:\u003c\/strong\u003e Helps dissipate heat around the motor structure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Stage3 8627 combines a polypropylene Plus One woofer cone, dome tweeter, built-in crossover, and vented basket frame in a compact oval speaker assembly. The basket is engineered for rigidity and airflow around the voice coil area. Its black finish and factory-oriented shape are intended to integrate neatly into compatible vehicle speaker locations.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's speaker opening, mounting depth, mounting-hole pattern, and trim-panel clearance before purchase or installation. These speakers are sold as a pair, and the manufacturer lists two speakers in the box; plan separately for any vehicle-specific wiring adapters, mounting hardware, or brackets your vehicle may require. Connect each speaker with correct polarity to a compatible 3-ohm-stable source, and use power appropriate for its 50-watt RMS rating.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45777038573759,"sku":"STAGE38627AM","price":52.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71FeH9rO2HL.jpg?v=1782493583"},{"product_id":"memphis-ms57v","title":"Memphis MS57V 5x7\" Convertible Car Speaker Set","description":"\u003cp\u003eThe Memphis MS57V is a 5x7-inch convertible car speaker set designed for vehicle audio upgrades where fitment flexibility matters. It combines a coaxial speaker layout with the option to move to a component-style arrangement. This makes it suitable for drivers replacing factory 5x7-inch speakers or planning a more customized front-stage installation.\u003c\/p\u003e\u003cp\u003eEach speaker uses a carbon fiber cone with a rubber surround, paired with an integrated aluminum tweeter. The design is intended to provide responsive midrange and bass performance while handling upper-frequency detail through the separate tweeter assembly. Its 75-watt RMS power rating makes it appropriate for use with a properly matched aftermarket amplifier or compatible factory-power upgrade plan.\u003c\/p\u003e\u003cp\u003eA defining feature of the MS57V is its convertible tweeter design. In its standard form, the tweeter is mounted coaxially with the woofer. With the separately sold Memphis MSCKIT, the tweeters can be removed and used in a component configuration for more flexible placement.\u003c\/p\u003e\u003cp\u003eThe set includes external passive crossovers to divide signal between the woofer and tweeter. Memphis uses its MClip solution to mount the crossover at the rear of the woofer magnet when desired. This can help keep the installation organized where mounting clearance permits.\u003c\/p\u003e\u003cp\u003eThe MS57V is part of Memphis Audio's MSeries speaker line and can serve as a practical step between a conventional coaxial replacement and a more involved component installation. The optional conversion kit adds phase plugs and tweeter-mounting hardware for surface, flush, or angled mounting approaches. Confirm vehicle-specific opening dimensions, mounting depth, and wiring needs before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConvertible Speaker Design:\u003c\/strong\u003e Runs as a coaxial set or converts to a component-style layout with the optional MSCKIT.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon Fiber Cone:\u003c\/strong\u003e Provides a lightweight, rigid cone material for responsive sound reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Tweeter:\u003c\/strong\u003e Uses an integrated aluminum tweeter for high-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Passive Crossovers:\u003c\/strong\u003e Directs appropriate frequencies to the woofer and tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMClip Crossover Mounting:\u003c\/strong\u003e Allows the crossover to attach behind the woofer magnet when suitable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber Surround:\u003c\/strong\u003e Supports cone movement and long-term durability in automotive use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MS57V combines carbon fiber cone material, a rubber surround, an aluminum tweeter, and a 13-ounce magnet structure. Its convertible construction lets the tweeter remain installed at the center of the speaker or be removed for a separate-mount layout with the optional conversion kit. Grilles are not included.\u003c\/p\u003e\u003cp\u003eVerify that the vehicle accepts a 5x7-inch speaker and provides adequate depth for the specified 2.4-inch mounting depth. For component conversion, purchase the MSCKIT separately and follow its tweeter-placement and crossover-wiring instructions. The MS57V mounting template is listed as 5.039 by 7.126 inches (128 by 181 mm).\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45834444701887,"sku":"MS57V","price":109.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/719Dlb_ZTKL.jpg?v=1783627740"},{"product_id":"memphis-srx572v","title":"Memphis SRX572V 5x7\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Memphis SRX572V is a pair of 5x7-inch, 2-way coaxial car speakers designed to replace compatible factory door or rear-deck speakers. It provides a straightforward upgrade path for vehicles using the common 5x7-inch speaker format. The coaxial layout combines the woofer and tweeter in each speaker for a compact installation.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for listeners replacing worn, low-output, or basic factory speakers while retaining a practical fitment profile. Their 50-watt RMS power rating suits use with an appropriately matched aftermarket amplifier. They can also be considered for factory-system replacement where vehicle fitment, wiring, and available power are verified.\u003c\/p\u003e\u003cp\u003eA polypropylene cone handles the main midrange and lower-frequency duties, while the integrated PEI tweeter reproduces higher frequencies. This two-way arrangement is designed to cover a broader portion of the audible range from each mounting location. The 90 dB sensitivity rating helps support useful output from modest-power car-audio systems.\u003c\/p\u003e\u003cp\u003eMemphis uses a rubber surround around the cone and a slim 2.15-inch mounting depth for this Street Reference model. The slim profile can be helpful where factory speaker locations have limited clearance behind the mounting surface. Its 4-ohm impedance is a conventional match for many aftermarket car-audio speaker outputs.\u003c\/p\u003e\u003cp\u003eThe SRX572V can serve as a pair upgrade in a compatible front or rear 5x7-inch location, depending on the vehicle. Confirm the factory opening, mounting-hole pattern, mounting depth, window clearance, connector style, and polarity before installation. For amplified systems, select amplifier channels that can deliver power appropriate for the speakers' 50-watt RMS rating.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5x7-Inch Size:\u003c\/strong\u003e Fits compatible 5x7-inch vehicle speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides the main cone structure for sound reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Tweeter:\u003c\/strong\u003e Handles high-frequency detail within the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber Surround:\u003c\/strong\u003e Supports controlled cone movement and durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlim Mounting Depth:\u003c\/strong\u003e Requires 2.15 inches of mounting depth.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe SRX572V combines a polypropylene woofer cone, rubber surround, and PEI tweeter in a 5x7-inch coaxial speaker frame. Memphis lists a 9-ounce magnet and 4-ohm nominal impedance for the model. The pair is part of the Memphis Street Reference speaker line.\u003c\/p\u003e\u003cp\u003eVerify that the vehicle accepts a 5x7-inch speaker and has at least 2.15 inches of mounting depth before purchasing. The listed cutout requirement is 4.9 by 7.03 inches, while the mounting template identifies a 4.94 by 7.06-inch mounting opening and a 4.17 by 4.92-inch screw-hole pitch. Use vehicle-specific adapter brackets or harnesses only when required for the installation; grilles are not included.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45834449911999,"sku":"SRX572V","price":28.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71O07jWo9NL.jpg?v=1783627941"}],"url":"https:\/\/nsidistributor.com\/collections\/5x7-inch-speakers.oembed","provider":"NSI Audio Distributing","version":"1.0","type":"link"}