{"title":"4x6 Inch Speakers","description":null,"products":[{"product_id":"warzone-2x-wz46pti-4x6-inch-super-coaxial-speaker-pair-4-ohm-380w-max-100w-rms-90db-sensitivity-ferrite-woofer-pei-dome-tweeter-for-pro-car-audio","title":"Warzone WZ46PTi 4x6\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Warzone WZ46PTi is a pair of 4x6-inch two-way coaxial car speakers designed for compact factory-speaker replacement locations. It combines a woofer and tweeter in each speaker, allowing a single mounting position to reproduce midrange and high-frequency detail. This format is suited to vehicle audio upgrades where space and mounting depth are limited.\u003c\/p\u003e\u003cp\u003eWith a 4-ohm nominal impedance, the WZ46PTi is intended for use with compatible car stereo speaker outputs or an appropriately matched amplifier. The pair is rated for 100 watts RMS total system power and 380 watts maximum total system power. Its 90 dB sensitivity specification supports useful output from modest-power systems when installed and powered correctly.\u003c\/p\u003e\u003cp\u003eThe speaker uses a glass-fiber woofer cone supported by a 10-ounce ferrite woofer magnet. This woofer construction is paired with a 44 mm PEI dome tweeter using an NdFeB magnet. The two-way arrangement is specified with a 5 kHz tweeter crossover point.\u003c\/p\u003e\u003cp\u003eWarzone lists an 85 Hz to 20 kHz frequency response for the WZ46PTi. Its sound profile is designed to cover the upper bass, midrange, and treble range handled by a compact coaxial speaker. For deeper low-frequency output, it can be used as part of a broader system that adds a properly matched subwoofer.\u003c\/p\u003e\u003cp\u003eInstallation dimensions are important for 4x6-inch speaker replacements because factory openings vary by vehicle. The listed cutout measures 3.26 by 5.52 inches, while mounting depth is 1.66 inches and overall height is 2.45 inches. Confirm the vehicle opening, clearance behind the mounting surface, wiring polarity, and mounting-hole pattern before purchase.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4x6-Inch Coaxial Format:\u003c\/strong\u003e Combines woofer and tweeter in each compact speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Design:\u003c\/strong\u003e Separates woofer and tweeter frequency duties within each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W RMS System Rating:\u003c\/strong\u003e Supports power matching with compatible audio equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass-Fiber Woofer Cone:\u003c\/strong\u003e Provides the specified woofer diaphragm material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e44 mm PEI Dome Tweeter:\u003c\/strong\u003e Handles high-frequency reproduction in the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Mounting Depth:\u003c\/strong\u003e A 1.66-inch depth helps with space-conscious installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ46PTi uses a glass-fiber woofer cone, a 10-ounce ferrite woofer magnet, and a PEI dome tweeter with an NdFeB magnet. Its integrated coaxial layout places the tweeter over the woofer, reducing the space required compared with separate component speakers. The specified 5 kHz crossover directs higher frequencies to the tweeter.\u003c\/p\u003e\u003cp\u003eUse the WZ46PTi where the vehicle accepts a 4x6-inch speaker and where the listed 3.26 by 5.52-inch cutout, 1.66-inch mounting depth, and 2.45-inch overall height can be accommodated. Match the speakers with a 4-ohm-compatible source unit or amplifier and observe correct positive and negative terminal polarity. The available product information confirms a speaker pair, but does not confirm included grilles, wiring adapters, or mounting hardware.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":45613514227903,"sku":"783501184270","price":44.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/916ur7hZZFL.jpg?v=1777926536"},{"product_id":"gravity-sgr464-4x6-inch-4-way-180-watts-peak-power-cea-rated-car-audio-full-range-speakers-1-pair-made-with-alpha-cellulose-cones-and-moisture-resistant-rubber-surround","title":"Gravity SGR464 4x6\" 4-Way Coaxial Speakers","description":"\u003cp\u003eThe Gravity SGR464 is a pair of 4x6-inch, 4-way coaxial car speakers intended to replace factory speakers in vehicles that use this compact oval size. It provides a full-range speaker solution for systems with worn, damaged, or basic OEM door speakers. Its 4-ohm impedance supports use with many factory and aftermarket car-audio speaker outputs.\u003c\/p\u003e\u003cp\u003eThis speaker is suited to drivers looking to refresh sound in factory locations without moving to a separate-component speaker system. The 4-way coaxial layout places multiple drivers within each speaker assembly, allowing one location to reproduce a broad portion of the audible range. It is a practical choice for front or rear locations when the vehicle accepts a 4x6-inch speaker.\u003c\/p\u003e\u003cp\u003eGravity rates the SGR464 at up to 180 watts peak power, with a published sensitivity of 90 dB. Its stated frequency response is 120 Hz to 20 kHz, covering midrange and high-frequency content for everyday listening. As with other compact full-range speakers, deeper bass performance depends on the vehicle installation and the rest of the audio system.\u003c\/p\u003e\u003cp\u003eAn alpha cellulose cone forms the main sound-producing surface, while a moisture-resistant rubber surround supports the cone's movement. The speaker also uses an anti-resonant stamped steel basket designed to provide a stable mounting structure. Together, these materials focus on dependable use in typical automotive environments.\u003c\/p\u003e\u003cp\u003eThe SGR464 can be used with a factory radio or an aftermarket head unit that supports 4-ohm speakers. It may also be part of a larger upgrade that includes an external amplifier and dedicated low-frequency reinforcement. Verify the vehicle's factory speaker opening, mounting depth, mounting-hole pattern, and available clearance before purchase.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4x6-Inch Speaker Size:\u003c\/strong\u003e Fits applications designed for compact oval 4x6-inch speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Way Coaxial Design:\u003c\/strong\u003e Combines multiple drivers in each full-range speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e180W Peak Rating:\u003c\/strong\u003e Published maximum peak power-handling specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Compatible with common factory and aftermarket speaker circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlpha Cellulose Cone:\u003c\/strong\u003e Provides the primary cone material for each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90 dB Sensitivity:\u003c\/strong\u003e Published sensitivity rating for efficient output from compatible sources.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe SGR464 uses alpha cellulose cones, moisture-resistant rubber surrounds, and anti-resonant stamped steel baskets. These construction details support the speaker assembly in automotive door, dash, or rear-deck environments where compact fitment and vibration resistance matter. The published magnet size is 2-3\/4 inches, and the published mounting depth is 2-1\/4 inches.\u003c\/p\u003e\u003cp\u003eUse the spade speaker terminals to connect positive and negative speaker wiring, observing correct polarity at both speakers. Before installation, compare the vehicle's opening, depth, terminal clearance, and mounting-hole pattern with the speaker dimensions; adapter brackets or wiring adapters may be required depending on the vehicle. The package includes two SGR464 speakers and a warranty card.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":45628073443519,"sku":"701160335895","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71KqTXAhy6L.jpg?v=1778621023"},{"product_id":"pair-of-soundxtreme-4x6-in-3-way-220-watts-coaxial-car-speakers-cea-rated-2-speakers","title":"SoundXtreme ST-460 4x6\" 3-Way Coaxial Car Speakers","description":"\u003cp\u003eThe SoundXtreme ST-460 is a pair of 4x6-inch, 3-way coaxial car speakers for replacing worn or basic factory door, dash, or rear-deck speakers where a 4x6-inch format is required. Their all-in-one coaxial design places the mid-woofer and tweeter in each speaker assembly, helping simplify a conventional speaker upgrade. This pair is intended for vehicles and installations that use 4-ohm speakers.\u003c\/p\u003e\u003cp\u003eWith a published frequency response of 60 Hz to 20,000 Hz, the ST-460 is designed to cover core music frequencies from mid-bass through high-frequency detail. The polypropylene mid-woofer cone is paired with a 1\/2-inch PEI balanced-dome tweeter for a practical full-range speaker layout. An 88 dB sensitivity rating is specified.\u003c\/p\u003e\u003cp\u003eThe pair is rated for 220 watts peak power handling, with a recommended amplifier power range of 10 to 50 watts RMS per channel. This makes the speakers appropriate for systems that are matched to their published RMS recommendation rather than selected solely by a peak-power number. The 4-ohm nominal impedance is common for automotive speaker wiring and amplification.\u003c\/p\u003e\u003cp\u003eSoundXtreme specifies EVC, or Extended Voice Coil, technology for the ST-460. The speaker construction also includes a neodymium magnet motor structure and a stamped-steel frame basket. These details support a compact coaxial design intended for automotive replacement applications.\u003c\/p\u003e\u003cp\u003eThe ST-460 can be used as part of a straightforward factory-speaker replacement or paired with a compatible aftermarket head unit or amplifier. Because vehicle openings and interior-panel clearance vary, confirm the available mounting space before purchase. A published 3-3\/4-inch cutout dimension can help when comparing the speaker with an existing opening.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4x6-Inch Speaker Size:\u003c\/strong\u003e Fits applications designed around a nominal 4x6-inch speaker format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Combines mid-woofer and high-frequency reproduction in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e220-Watt Peak Rating:\u003c\/strong\u003e Published peak power handling is 220 watts per pair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended RMS Range:\u003c\/strong\u003e Designed for 10 to 50 watts RMS per channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Uses a 1\/2-inch balanced-dome PEI tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches the nominal impedance used by many car-audio systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ST-460 uses polypropylene for its mid-woofer cone, a polyester-foam surround, and a 1\/2-inch Polyether Imide (PEI) balanced-dome tweeter. It also has a neodymium magnet motor structure and stamped-steel frame basket. SoundXtreme lists EVC technology as part of the speaker design.\u003c\/p\u003e\u003cp\u003eVerify that the vehicle accepts a nominal 4x6-inch speaker and compare the published 3-3\/4-inch cutout requirement with the factory opening before installation. Match the speakers to a 4-ohm audio channel and keep amplifier output within the stated 10 to 50 watts RMS-per-channel recommendation. The package includes speaker wire, screws, and a user manual to support installation.\u003c\/p\u003e","brand":"SOUNDXTREME","offers":[{"title":"Default Title","offer_id":45686803595455,"sku":"704129646681","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81yQOJis8OL.jpg?v=1780607007"},{"product_id":"crunch-cs46cx","title":"Crunch CS46CX 4\" x 6\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Crunch CS46CX is a pair of 4 x 6-inch, 2-way coaxial car speakers designed for replacing worn or basic factory speakers in vehicles that use this compact size. Its coaxial layout places the tweeter and woofer together, simplifying installation where a dedicated component speaker system is not practical. The speakers use a 4-ohm design and are intended for universal mobile-audio applications.\u003c\/p\u003e\u003cp\u003eThese speakers are built to provide full-range playback with a focus on clear upper frequencies and defined midrange output from a compact mounting footprint. A 1-inch Neo-Mylar soft-dome tweeter handles high-frequency detail, while the silver alpha-cellulose poly cone handles the main woofer duties. Crunch lists a 55 Hz to 19 kHz frequency response and 88 dB sensitivity.\u003c\/p\u003e\u003cp\u003eThe CS46CX uses a ferrite magnet motor, pure-copper voice coil, and Kapton former as part of its motor assembly. Its over-coil cooling system exchanges air over the voice coil through the spider to support thermal management during use. The speaker also uses an internal passive Butterworth crossover with a listed 6 kHz crossover point and 12 dB slope.\u003c\/p\u003e\u003cp\u003eDurability-oriented construction includes a UV-resistant rubber surround, high-temperature cone-to-surround adhesive, and an epoxy-infused natural-fiber spider. These materials support the moving assembly while addressing exposure to heat and moisture common in vehicle installations. A textured ABS gasket is used to create a linear seal at the mounting surface.\u003c\/p\u003e\u003cp\u003eThe CS46CX can be used as a direct-size speaker upgrade when its mounting dimensions and depth suit the vehicle location. Its anti-resonant stamped-steel basket provides a rigid mounting structure, and spade terminals allow conventional speaker-wire connections. For a complete system, pair it with a compatible 4-ohm source or amplifier channel and confirm physical fitment before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 x 6-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in one compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Neo-Mylar Tweeter:\u003c\/strong\u003e Provides high-frequency reproduction with a soft-dome design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilver Alpha-Cellulose Cone:\u003c\/strong\u003e Delivers the main midrange and bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Rubber Surround:\u003c\/strong\u003e Supports cone movement and resists moisture exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Butterworth Crossover:\u003c\/strong\u003e Directs frequencies between woofer and tweeter elements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Provides a rigid, anti-resonant speaker mounting structure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CS46CX uses a ferrite magnet motor, pure-copper voice coil on a Kapton former, epoxy-infused natural-fiber spider, and textured ABS gasket. Its silver alpha-cellulose poly cone is paired with a UV-resistant rubber surround and high-temperature adhesive. The anti-resonant stamped-steel basket is designed to limit flex and ringing from the speaker frame.\u003c\/p\u003e\u003cp\u003eVerify that the vehicle accepts a 4 x 6-inch speaker, a 5.5 x 3.46-inch cutout, and a 3.5-inch mounting depth before ordering. Connect the speaker using spade connectors or direct soldering, observing positive and negative polarity. No grilles are included, so these speakers are most suitable for locations protected by an OEM door, dash, or rear-deck panel.\u003c\/p\u003e","brand":"CRUNCH","offers":[{"title":"Default Title","offer_id":45759992529087,"sku":"CS46CX","price":11.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71ebPbYNszL.jpg?v=1782104990"},{"product_id":"kenwood-kfc-4675c","title":"Kenwood KFC-4675C 4\" x 6\" 2-Way Car Speakers","description":"\u003cp\u003eThe Kenwood KFC-4675C is a pair of 4 x 6-inch, 2-way car speakers designed to replace worn or limited factory speakers in compatible vehicle locations. Its compact oval format suits vehicles that use 4 x 6-inch speaker openings. The speakers use a 4-ohm nominal impedance for use with compatible car audio systems.\u003c\/p\u003e\u003cp\u003eThis model is intended for drivers seeking a straightforward factory-speaker replacement without changing to a larger speaker size. A 20-watt RMS rated input and 90 dB\/W at 1 m sensitivity make it appropriate for modest-power factory radios or carefully matched amplification. It can also be used as part of a broader speaker refresh when matching vehicle fitment is confirmed.\u003c\/p\u003e\u003cp\u003eThe 2-way design combines an injection polypropylene cone woofer with a 1-inch PEI balanced-dome high-frequency driver. The woofer handles the main range of music playback while the separate dome driver extends high-frequency reproduction. Kenwood specifies a 50 Hz to 25 kHz frequency response.\u003c\/p\u003e\u003cp\u003eA steel basket and ferrite magnet provide the speaker's core structure, while the black finish maintains a discreet installed appearance. The 4 x 6-inch woofer format is built around a compact footprint for factory-style mounting locations. Its 1-5\/8-inch mounting depth should be checked against available door, dash, or rear-deck clearance before installation.\u003c\/p\u003e\u003cp\u003eThe KFC-4675C is sold as a pair, making it suitable for replacing two factory speaker positions at once. It is a full-range speaker solution rather than a subwoofer, so low-bass output will depend on the vehicle, installation location, and the rest of the audio system. For an accurate fit, compare the vehicle's opening, mounting depth, mounting pattern, and wiring connection with the speaker dimensions before purchase.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 x 6-Inch Format:\u003c\/strong\u003e Fits compatible oval factory speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Design:\u003c\/strong\u003e Separates woofer and high-frequency driver duties.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInjection PP Woofer:\u003c\/strong\u003e Uses a polypropylene cone diaphragm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch PEI Balanced Dome:\u003c\/strong\u003e Handles high-frequency playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches many conventional car audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90 dB Sensitivity:\u003c\/strong\u003e Supports output from modest-power sources.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-4675C uses an injection polypropylene woofer cone, a 1-inch PEI balanced-dome driver, a black steel basket, and a ferrite magnet. The speaker measures 6-1\/4 inches wide by 4 inches high and 3-1\/16 inches deep without a grille. Kenwood specifies a 1-5\/8-inch mounting depth.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 4 x 6-inch speaker and has sufficient mounting depth before installation. The package is listed with two speakers, speaker-wire lengths, self-tapping screws, and speed clips; vehicle-specific brackets, adapters, or harnesses may still be needed depending on the application. Use an amplifier or receiver compatible with a 4-ohm speaker load and the 20-watt RMS rated input.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":45766406701247,"sku":"KFC-4675C","price":46.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/51-OwTyrvKL.jpg?v=1782245956"},{"product_id":"rockford-fosgate-p1v2-46","title":"Rockford Fosgate P1V2-46 4x6-Inch 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Rockford Fosgate P1V2-46 is a pair of 4 x 6-inch, 4-ohm, 3-way coaxial car speakers designed to replace basic factory speakers. It is intended for vehicles with single-speaker locations in doors or rear decks. The all-in-one coaxial layout adds dedicated high-frequency drivers where many OEM single-cone speakers have none.\u003c\/p\u003e\u003cp\u003eEach speaker is rated for 75 watts RMS and 150 watts peak power. With a 64 Hz to 25 kHz frequency response, the pair is suited to full-range playback in compact factory-size locations. Its 86 dB sensitivity rating at 1 watt\/1 meter supports use with compatible factory or aftermarket power.\u003c\/p\u003e\u003cp\u003eThe P1V2-46 uses a mica-reinforced polypropylene curvilinear cone and Santoprene half-roll surround. This combination is paired with a 1-inch vented Kapton voice coil former and a Y35 ferrite motor structure. The design focuses on controlled cone movement, heat dissipation, and durability in daily vehicle use.\u003c\/p\u003e\u003cp\u003eA 3\/4-inch Tetolon inverted-dome tweeter and a 3\/8-inch polypropylene piezo super tweeter handle upper-frequency detail. The concealed ICC+ crossover network uses a 6 dB-per-octave tweeter high-pass point at 9 kHz. Included external bass blockers provide a 400 Hz, 6 dB-per-octave high-pass option for the midrange.\u003c\/p\u003e\u003cp\u003eThese speakers are a practical fit for an OEM replacement or a modest car-audio upgrade using a compatible 4-ohm source or amplifier. A removable motor cover helps when rear mounting clearance is limited. Grilles are not included, so installations behind exposed speaker openings may require separately sourced protection.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Layout:\u003c\/strong\u003e Combines the main driver, dome tweeter, and piezo super tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75-Watt RMS Rating:\u003c\/strong\u003e Supports amplifier matching up to 75 watts RMS per speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible 4-ohm factory and aftermarket audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVAST 2.0 Surround:\u003c\/strong\u003e Increases effective cone area while retaining the compact speaker footprint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Bass Blockers:\u003c\/strong\u003e Helps reduce low-frequency demand on the compact midrange driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Motor Cover:\u003c\/strong\u003e Provides an additional clearance option for tighter mounting locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P1V2-46 uses a 15% glass-fiber-reinforced PA66 injection-molded composite basket, co-molded terminals, and a high-strength Y35 ferrite motor structure. Its cone is chemically bonded to the Santoprene surround, while a Nomex spider and braided tinsel leads support the moving assembly. The speaker is finished in black and uses a 3-way coaxial configuration.\u003c\/p\u003e\u003cp\u003eConfirm the 5.62 x 3.66-inch cutout requirement, 2.02-inch mounting depth with the motor cover, and 0.38-inch front-side clearance before ordering. The package includes mounting hardware, 4-tab adapters, a cutout template, speaker wire, connectors, and non-polarized bass blockers. Install the bass blockers inline on the positive speaker lead when used, maintain correct polarity, and check door-window or rear-deck clearance before final tightening.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45767997587647,"sku":"P1V2-46","price":77.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61JC3_h2swL.jpg?v=1782270224"},{"product_id":"rockford-fosgate-t1462","title":"Rockford Fosgate T1462 4x6\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Rockford Fosgate T1462 is a pair of 4x6-inch, 2-way coaxial full-range car speakers designed for vehicles that use this compact factory speaker size. They provide a direct-fit-oriented upgrade path for worn or limited-output OEM speakers while retaining a conventional 4-ohm load. Each speaker is rated for 45 watts RMS, making the set suitable for appropriately matched aftermarket amplification or compatible factory-replacement systems.\u003c\/p\u003e\u003cp\u003eThis Power-series coaxial design places the tweeter and woofer together in one speaker assembly, simplifying installation where separate component speakers are not practical. Its 75 Hz to 22 kHz frequency response is intended to cover midrange and high-frequency duties in a vehicle audio system. For listeners building a fuller system, the T1462 can serve as a front, rear, or auxiliary speaker pair alongside a separately selected subwoofer system.\u003c\/p\u003e\u003cp\u003eThe T1462 uses a 4x6-inch injection-molded polypropylene and carbon-fiber-blend cone with a butyl-rubber VAST surround. The VAST surround design increases usable cone area compared with a conventional surround layout. A fatigue-resistant poly-cotton linear spider and woven-fiber-reinforced lead wires support controlled cone movement.\u003c\/p\u003e\u003cp\u003eHigh frequencies are handled by a 0.75-inch aluminum-dome tweeter with a neodymium motor and polyurethane suspension. An Integrated Concealed Crossover separates the woofer and tweeter duties within the speaker assembly. This keeps the crossover protected within the coaxial design and avoids the need to mount a separate external crossover.\u003c\/p\u003e\u003cp\u003eInstallation is supported by the speaker's FlexFit mounting frame and included adapter plates for 4x6-inch and 6x8-inch applications. Confirm the vehicle's speaker opening, mounting-hole pattern, clearance, and available 2.00-inch mounting depth before purchase. The T1462 is supplied as a stereo pair, so it is suited to replacing two matching vehicle speaker locations at once.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4x6-Inch Coaxial Design:\u003c\/strong\u003e Fits many compact factory speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e45 Watts RMS Per Speaker:\u003c\/strong\u003e Supports properly matched amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Concealed Crossover:\u003c\/strong\u003e Separates woofer and tweeter frequencies internally.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVAST Butyl-Rubber Surround:\u003c\/strong\u003e Maximizes usable cone area and supports durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum-Dome Tweeter:\u003c\/strong\u003e Handles high-frequency detail in the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x8 Adapter Plates Included:\u003c\/strong\u003e Provides additional mounting flexibility where applicable.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe T1462 combines an injection-molded polypropylene and carbon-fiber-blend cone, butyl-rubber VAST surround, and StampCast frame with FlexFit mounting provisions. Its ferrite woofer motor, aluminum-dome neodymium tweeter, and internal crossover are integrated into a compact 4x6-inch coaxial package. The speaker does not include a grille or trim ring.\u003c\/p\u003e\u003cp\u003eUse the supplied mounting hardware and adapter plates only after confirming vehicle-specific fitment. Each speaker requires a 3.76 x 6.01-inch mounting opening and 2.00 inches of mounting depth; check for window mechanisms, wiring, and other obstructions behind a door or panel. Connect the positive speaker lead to the terminal marked positive, maintain correct polarity on both speakers, and pair them with a 4-ohm source or amplifier that is appropriately power-matched.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768080916671,"sku":"T1462","price":75.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61nxFgW5-JL.jpg?v=1782271149"},{"product_id":"hertz-dcx460-3","title":"Hertz DCX 460.3 4x6-Inch Two-Way Coaxial Speakers","description":"\u003cp\u003eThe Hertz DCX 460.3 is a pair of 4 x 6-inch, two-way coaxial car speakers designed for vehicles that use this compact oval factory speaker size. They provide a direct speaker-upgrade option for drivers seeking clearer everyday playback from compatible factory or aftermarket audio systems. Their coaxial layout combines the woofer and tweeter into each speaker for a space-efficient installation.\u003c\/p\u003e\u003cp\u003eWith 40 watts continuous power handling and 93 dB sensitivity, the DCX 460.3 is suited to systems powered by a factory radio, aftermarket receiver, or appropriately matched external amplifier. The 4-ohm impedance is common in car-audio speaker installations. Its 65 Hz to 21 kHz frequency response covers core midrange, upper bass, and treble duties.\u003c\/p\u003e\u003cp\u003eThe sound design centers on a water-repellent pressed-paper woofer cone paired with a PEI dome tweeter. This combination is intended to reproduce vocals and instruments through the midrange while adding high-frequency detail from the centrally mounted tweeter. A TPU surround supports cone movement and helps control resonance.\u003c\/p\u003e\u003cp\u003eHertz uses a high-density-flux ferrite woofer magnet, a neodymium tweeter magnet, and a pure-copper woofer voice coil wound on a Conex former. The 25 mm woofer voice coil and large motor assembly are engineered for controlled driver operation. A built-in crossover directs appropriate frequency ranges to the coaxial drivers.\u003c\/p\u003e\u003cp\u003eThese speakers work well as replacements in compatible 4 x 6-inch door, dash, or rear-deck locations where installation depth and mounting pattern are verified first. Their 53 mm mounting depth and specified mounting dimensions should be compared with the vehicle opening before purchase. They can serve as a practical full-range speaker upgrade or as part of a broader system refresh with an upgraded receiver and properly matched amplification.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 x 6-Inch Coaxial Format:\u003c\/strong\u003e Fits compatible oval speaker locations with integrated woofer and tweeter drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Design:\u003c\/strong\u003e Separates midbass and treble reproduction within each speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40W Continuous Handling:\u003c\/strong\u003e Supports properly matched factory-radio or amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Treated woofer cone helps resist moisture exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Compact dome tweeter handles high-frequency playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Crossover:\u003c\/strong\u003e Directs frequencies between the woofer and tweeter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DCX 460.3 uses a water-repellent pressed-paper cone, TPU surround, ferrite woofer magnet, and neodymium tweeter magnet. Its pure-copper voice coil is wound on a Conex former, while the DIN-size basket has abrasion-resistant dust paint. Tin-plated high-current terminals and silver-plated lead wires support secure electrical connections.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's 4 x 6-inch opening, mounting dimensions, available depth, and factory mounting pattern before installation. The speaker has a 53 mm depth, with published A1, A2, B1, B2, C, and D mounting dimensions that should be checked against the installation location. Use an amplifier or receiver appropriate for 4-ohm speakers and avoid exceeding the 40-watt continuous power rating per speaker.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":45771449663679,"sku":"DCX460-3","price":62.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71d5hMvNDoL.jpg?v=1782362635"},{"product_id":"jvc-cs-v4627","title":"JVC CS-V4627 4 x 6\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe JVC CS-V4627 is a pair of 4 x 6-inch, 2-way coaxial car speakers designed to replace compatible factory speakers. It brings the woofer and tweeter together in each speaker, making it a practical option for compact door, dash, or rear-deck locations that use this size. With a 4-ohm impedance and 20-watt RMS power handling, it is suited to many standard car-audio speaker circuits.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for drivers who want to refresh aging or damaged factory speakers without moving to a separate-component system. Their 55 Hz to 25 kHz frequency response covers bass, vocals, and high-frequency detail within a compact 4 x 6-inch format. The 85 dB\/W.m sound-pressure rating and 5 kHz crossover frequency support a balanced handoff between the woofer and tweeter.\u003c\/p\u003e\u003cp\u003eA Carbon Mica Cone is used for the woofer, combining a lightweight construction with the rigidity needed for controlled cone movement. JVC pairs it with a Hybrid Surround made from rubber and cloth. This design is intended to support smoother low-frequency movement while maintaining a compact speaker profile.\u003c\/p\u003e\u003cp\u003eFor upper-frequency reproduction, each CS-V4627 uses a 1-inch Poly-Ether Imide balanced tweeter with a neodymium magnet. The woofer uses a strontium ferrite magnet and stamped steel frame. Together, these materials provide the core structure for the speaker's coaxial design.\u003c\/p\u003e\u003cp\u003eThe CS-V4627 can be used with a compatible factory radio or an external amplifier that is properly matched to its 4-ohm load and 20-watt RMS rating. Its 44.8 mm mounting depth can help when planning an installation in shallow factory locations, but vehicle-specific mounting clearance should always be checked first. JVC includes mounting brackets, hardware, and speaker cords to support installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 x 6-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20W RMS Handling:\u003c\/strong\u003e Supports properly matched 4-ohm car-audio power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e140W Peak Power:\u003c\/strong\u003e Provides short-term peak power capacity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon Mica Cone:\u003c\/strong\u003e Forms the woofer cone for responsive sound reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Surround:\u003c\/strong\u003e Rubber-and-cloth surround supports controlled cone travel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch PEI Tweeter:\u003c\/strong\u003e Balanced tweeter extends high-frequency response.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CS-V4627 uses a stamped steel woofer frame, Carbon Mica Cone, hybrid rubber-and-cloth surround, strontium ferrite woofer magnet, and neodymium tweeter magnet. Each speaker has a specified mounting depth of 44.8 mm and weighs 450 g. The compact oval format is made for applications that accept a 4 x 6-inch speaker.\u003c\/p\u003e\u003cp\u003eBefore installation, verify the vehicle's mounting opening, panel clearance, window travel, and speaker depth. Turn off amplifier power before connecting the speakers, observe speaker polarity, and leave enough wire slack to prevent damage. The supplied mounting brackets, M3 screws, M5 washers, M3 nuts, and speaker cords can be used where appropriate; a vehicle-specific installation kit may still be needed.\u003c\/p\u003e","brand":"JVC","offers":[{"title":"Default Title","offer_id":45776276259007,"sku":"CS-V4627","price":14.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81WgU70Kf-L_6361e772-18d4-4e7a-9745-291289bcff99.jpg?v=1782489786"},{"product_id":"hifonics-hcc46cx","title":"Hifonics HCC46CX 4 x 6-Inch 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Hifonics HCC46CX is a pair of 4 x 6-inch, 2-way coaxial car speakers designed as a factory-speaker replacement or compact audio-system upgrade. They combine a woofer and tweeter in each speaker assembly, helping simplify installation where a 4 x 6-inch speaker location is available. With 4-ohm impedance and 40 watts RMS power handling per speaker, they are suited to compatible factory radios or appropriately matched aftermarket amplification.\u003c\/p\u003e\u003cp\u003eA 1-inch aluminum dome tweeter handles upper-frequency detail, while the lightweight blue woven fiber cone is designed for responsive midrange reproduction. The stated 80Hz-20kHz frequency response covers core mid-bass, vocal, and high-frequency content. Butyl rubber surrounds support cone movement while providing a durable connection between the cone and frame.\u003c\/p\u003e\u003cp\u003eThe HCC46CX uses a passive Butterworth crossover with a 6kHz, 12dB slope to divide frequencies between the woofer and tweeter. This integrated crossover design keeps the speaker package self-contained without requiring a separate external crossover module. Its 88dB sensitivity rating provides a useful reference point when comparing it with other replacement speakers.\u003c\/p\u003e\u003cp\u003eHifonics builds the speaker around an anti-resonant stamped steel basket and a ferrite magnet motor. A pure copper voice coil on a Kapton former is paired with an overcoil cooling system that moves air over the voice coil through the spider. The epoxy-infused natural fiber spider supports the moving assembly while contributing to the speaker's structural design.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for vehicles with suitable 4 x 6-inch mounting locations, a 5.5 x 3.84-inch cutout, and 3.0 inches of mounting depth. Spade terminals and direct-solder connection options allow installers to choose an appropriate wiring method. They can be used as a straightforward replacement pair or as part of a broader system upgrade with matched amplification and source equipment.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 x 6-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter elements in each speaker for a compact replacement format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Aluminum Dome Tweeter:\u003c\/strong\u003e Provides dedicated high-frequency reproduction within the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Woven Fiber Cone:\u003c\/strong\u003e Uses a lightweight cone material designed for responsive midrange performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eButyl Rubber Surround:\u003c\/strong\u003e Supports cone movement and provides durable cone-to-frame coupling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Butterworth Crossover:\u003c\/strong\u003e Uses a 6kHz, 12dB crossover slope to divide frequencies between drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOvercoil Cooling System:\u003c\/strong\u003e Promotes airflow over the voice coil through the speaker spider.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe HCC46CX uses an anti-resonant stamped steel basket, ferrite magnet motor, pure copper voice coil, and lightweight Kapton former. Its epoxy-infused natural fiber spider supports the moving components, while the butyl rubber surround and woven fiber cone complete the woofer assembly. The speakers have a black and blue finish and do not include grilles, as they are generally installed behind an existing vehicle panel or dash location.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's available opening, mounting cutout, and clearance before purchase: this model requires a 5.5 x 3.84-inch cutout and 3.0 inches of mounting depth. Connect using compatible spade terminals or direct soldering, observing correct speaker polarity. For amplified installations, select an amplifier and gain setting appropriate for the speakers' 40-watt RMS, 4-ohm rating.\u003c\/p\u003e","brand":"HIFONICS","offers":[{"title":"Default Title","offer_id":45776314532031,"sku":"HCC46CX","price":17.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71PRSWOhXhL.jpg?v=1782490549"},{"product_id":"mb-quart-xk2-146","title":"MB Quart XK2-146 4x6\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe MB Quart XK2-146 is a pair of 4x6-inch, 2-way coaxial speakers for replacing factory vehicle speakers or building a compact car-audio upgrade. It combines a woofer and tweeter into each speaker assembly, helping simplify installation where a factory 4x6-inch opening is available. This format is suited to drivers seeking an updated speaker solution without adding separate external crossovers.\u003c\/p\u003e\u003cp\u003eRated at 90 watts RMS and 180 watts peak per pair, the XK2-146 is intended for systems that need more power capability than a basic factory speaker replacement. Its 88 dB sensitivity and stated 55 Hz to 22 kHz frequency response describe a design made to cover a broad portion of the audible range. Match the speakers with an appropriately rated source unit or amplifier and avoid exceeding their continuous power rating.\u003c\/p\u003e\u003cp\u003eThe 2-way coaxial layout places high-frequency reproduction within the same speaker assembly as the main driver. This can be useful in factory-style locations where there is limited space for separate tweeters. The result is a straightforward speaker upgrade path for compatible dash, door, or rear-deck locations.\u003c\/p\u003e\u003cp\u003eThe XK2-146 uses a compact 4x6-inch footprint for vehicles designed around that common speaker size. Confirmed mounting guidance lists a 5.5 x 3.46-inch cutout requirement and a 3-inch depth from the flange. Measuring the original opening, mounting-hole pattern, and clearance behind the panel remains important before purchase.\u003c\/p\u003e\u003cp\u003eThese speakers can be used as a direct replacement pair or as part of a larger system with an aftermarket receiver or external amplification. They are most appropriate when the installation location accepts their stated dimensions and the system can be configured for their power range. Vehicle-specific adapters, harnesses, and mounting hardware may be needed depending on the application.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4x6-Inch Speaker Size:\u003c\/strong\u003e Fits applications designed for compact 4x6-inch speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer and tweeter functions in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90W RMS Per Pair:\u003c\/strong\u003e Supports systems with appropriately matched continuous power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e180W Peak Per Pair:\u003c\/strong\u003e Provides stated short-term peak power handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e55 Hz–22 kHz Response:\u003c\/strong\u003e Covers bass, midrange, and high-frequency content.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e88 dB Sensitivity:\u003c\/strong\u003e Indicates the stated efficiency rating for the pair.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe XK2-146 is a compact coaxial speaker system built for automotive use. Confirmed listing information describes durable, high-quality construction, but does not identify specific cone, surround, tweeter, basket, magnet, or voice-coil materials. Its integrated 2-way layout keeps the installation format simple for locations that do not accommodate separate component speakers.\u003c\/p\u003e\u003cp\u003eBefore installation, verify that the vehicle has a compatible 4x6-inch speaker location, a 5.5 x 3.46-inch cutout, and at least 3 inches of clearance from the mounting flange. Check mounting-hole alignment and connector compatibility, since adapters or a vehicle-specific wiring harness may be required. For amplified systems, set gain conservatively and match power delivery to the 90-watt RMS-per-pair rating.\u003c\/p\u003e","brand":"MB QUART","offers":[{"title":"Default Title","offer_id":45776336126143,"sku":"XK2-146","price":16.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/616fLwwkaXL.jpg?v=1782490776"},{"product_id":"jbl-stage36427am","title":"JBL STAGE36427AM 4\" x 6\" Two-Way Coaxial Speakers","description":"\u003cp\u003eThe JBL STAGE36427AM Stage3 6427 is a pair of 4\" x 6\" two-way coaxial car speakers designed for replacing compatible factory speakers. It is suited to vehicles with oval 4\" x 6\" speaker locations where clearer, more capable sound is desired from a compact factory-size format. Each speaker combines a woofer and centrally mounted tweeter in one assembly for a straightforward full-range upgrade.\u003c\/p\u003e\u003cp\u003eWith 35 watts RMS power handling per speaker and 91dB sensitivity at 2.83V\/1m, these speakers are intended to work with a factory radio or a suitably matched aftermarket amplifier. Their 3-ohm nominal impedance is designed to draw effectively on available power from compatible car-audio electronics. The rated 75Hz to 20kHz frequency response supports midrange, treble, and upper-bass duties in a vehicle system.\u003c\/p\u003e\u003cp\u003eJBL's Plus One polypropylene woofer cone architecture moves the cone attachment point outward to increase usable cone area. More cone area can help a compact oval speaker move more air than a conventional design with the same frame size. This makes the Stage3 6427 a practical option for factory-replacement locations that have limited space.\u003c\/p\u003e\u003cp\u003eThe Stage3 6427 uses an edge-driven dome tweeter to reproduce higher-frequency detail. Its two-way coaxial layout places the tweeter with the woofer, helping simplify installation where separate tweeter locations are not available. JBL also specifies a 6kHz crossover point for the speaker assembly.\u003c\/p\u003e\u003cp\u003eA rigid vented basket frame is designed to promote voice-coil cooling as the speaker operates. The compact 4\" x 6\" format can fit many factory oval speaker positions, but vehicle-specific opening dimensions, mounting depth, mounting points, and connector style should be checked before purchase. Use the pair as a direct speaker replacement or as part of a wider system upgrade with compatible front, rear, or amplified channels.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4\" x 6\" Coaxial Format:\u003c\/strong\u003e Combines woofer and tweeter functions in each compact oval speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Design:\u003c\/strong\u003e Separates low and high frequency duties within one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Woofer Cone:\u003c\/strong\u003e Uses increased cone area to support efficient output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer:\u003c\/strong\u003e Provides a lightweight cone material for everyday car-audio use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge-Driven Dome Tweeter:\u003c\/strong\u003e Handles high-frequency reproduction in the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Basket Frame:\u003c\/strong\u003e Helps promote airflow around the voice-coil and motor area.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Stage3 6427 uses a black oval frame, polypropylene woofer cone, integrated dome tweeter, and vented basket construction. Its stated outer dimensions are approximately 157.0mm by 99.5mm, with an overall depth of approximately 52.1mm. The speaker is engineered as a 4\" x 6\" two-way coaxial replacement design.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts 4\" x 6\" speakers and verify clearance behind the mounting surface before installation. JBL lists two speakers in the box; check whether your vehicle requires separate mounting adapters, screws, speed clips, or wiring harness adapters. For amplified systems, use an amplifier channel rated to operate with a 3-ohm speaker load and match power using the 35W RMS rating per speaker.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45777046044863,"sku":"STAGE36427AM","price":49.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71qtT2gSDkL.jpg?v=1782493595"},{"product_id":"jbl-jblspkcb644f","title":"JBL Club 644F 4\" x 6\" Two-Way Car Speakers","description":"\u003cp\u003eThe JBL Club 644F is a pair of 4\" x 6\" two-way car speakers designed to replace compatible factory-installed speakers. It provides a compact upgrade path for vehicles that use this common oval speaker size. With 92dB sensitivity, it is suited to systems powered by a factory radio as well as aftermarket amplification.\u003c\/p\u003e\u003cp\u003eThese speakers handle 40 watts RMS and up to 120 watts peak per speaker. Their 75Hz–20kHz frequency response covers midrange and high-frequency reproduction while fitting the limited mounting space often found in factory locations. The 3-ohm nominal impedance is designed to draw more power from compatible car audio systems than a typical 4-ohm speaker.\u003c\/p\u003e\u003cp\u003eJBL's Plus One™ woofer cone architecture increases cone area within the speaker's size class. This design is intended to support higher sensitivity and greater low-frequency output than similarly sized conventional cones. The result is a responsive speaker intended for everyday music listening and direct factory-speaker replacement.\u003c\/p\u003e\u003cp\u003eThe woofer uses an acoustically damped, UV-resistant polypropylene cone for clean operation and durability in automotive environments. JBL also equips the Club 644F with a larger magnet structure to support its power-handling capacity. Its two-way configuration uses an integrated high-frequency driver to keep installation straightforward.\u003c\/p\u003e\u003cp\u003eThe Club 644F works well as a front- or rear-speaker upgrade where the vehicle accepts a 4\" x 6\" speaker. It can be used with a factory head unit or paired with an appropriately matched external amplifier. Confirm vehicle fitment, mounting depth, mounting-hole pattern, and wiring connections before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4\" x 6\" Two-Way Design:\u003c\/strong\u003e Fits compatible oval factory speaker locations while reproducing midrange and high-frequency information from one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40W RMS Power Handling:\u003c\/strong\u003e Supports continuous power up to 40 watts per speaker for properly matched amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Ohm Nominal Impedance:\u003c\/strong\u003e Helps compatible car audio systems deliver more power than with a conventional 4-ohm speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One™ Cone Architecture:\u003c\/strong\u003e Uses increased cone area to support sensitivity and low-frequency output within the same speaker size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Polypropylene Cone:\u003c\/strong\u003e Provides a damped cone material designed for heat and humidity found in vehicle interiors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92dB Sensitivity:\u003c\/strong\u003e Supports efficient output with factory radios and modestly powered aftermarket systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Club 644F uses a polypropylene woofer cone with acoustic damping and UV resistance for automotive use. Its Plus One™ cone design and larger magnet structure are engineered to support output and power handling in a compact 4\" x 6\" format. The speakers are finished in black and supplied as a pair.\u003c\/p\u003e\u003cp\u003eCheck that the vehicle accepts 4\" x 6\" speakers and compare the available mounting space with the speaker's 157.0mm overall width, 99.5mm overall height, and 55.6mm depth. Use the included foam gasket as appropriate for the mounting surface, and verify polarity when connecting speaker wire. Vehicle-specific mounting adapters, wiring harnesses, or fasteners may be needed depending on the application.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45777068294335,"sku":"JBLSPKCB644F","price":47.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61P_nFEtrnL.jpg?v=1782493647"},{"product_id":"infinity-infspkrf467fus","title":"Infinity REF467F 4x6\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Infinity REF467F is a pair of 4x6-inch, 2-way coaxial car speakers designed to replace worn or limited factory speakers in compatible vehicle locations. Its compact format is intended for standard 4x6-inch applications while delivering a broader, more detailed presentation than many original-equipment speaker systems. This is a practical option for drivers building a straightforward front- or rear-speaker upgrade.\u003c\/p\u003e\u003cp\u003eEach REF467F speaker is rated for 45 watts RMS and 135 watts peak power handling. With 92 dB sensitivity at 2.83V and a 3-ohm nominal impedance, the pair is designed to work in automotive audio systems that can provide clean, appropriate power. The rated frequency response is 75 Hz to 21 kHz, covering core midrange and high-frequency content while leaving the deepest bass to a dedicated subwoofer if desired.\u003c\/p\u003e\u003cp\u003eThe 2-way coaxial layout combines a woofer and tweeter in each speaker assembly, helping simplify installation where the vehicle uses a single 4x6-inch speaker location. Infinity Reference speakers use edge-driven textile tweeters intended to reproduce smooth, clear high frequencies. This makes the REF467F well suited to listeners looking for clearer vocals, percussion, and upper-frequency detail from a compact replacement speaker.\u003c\/p\u003e\u003cp\u003eInfinity's Plus One woofer cone architecture uses increased cone area compared with conventional cones in its class. The additional radiating area is designed to support sensitivity, low-frequency output, and midrange performance within the available mounting footprint. The REF467F also uses a compact, optimized frame intended to help it fit a broad range of factory speaker locations.\u003c\/p\u003e\u003cp\u003eFor a balanced system, the REF467F can be used with a factory radio or an aftermarket receiver or amplifier that is compatible with its impedance and power requirements. An amplifier should be selected and adjusted with the 45-watt RMS-per-speaker rating in mind rather than the peak rating. Confirm speaker-opening dimensions, mounting depth, cutout size, wiring polarity, and vehicle-specific installation requirements before purchase.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4x6-Inch Coaxial Format:\u003c\/strong\u003e Fits compatible compact factory speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Speaker Design:\u003c\/strong\u003e Combines woofer and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e45W RMS Handling:\u003c\/strong\u003e Supports appropriately matched aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge-Driven Textile Tweeter:\u003c\/strong\u003e Designed for smooth, clear high-frequency playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Woofer Architecture:\u003c\/strong\u003e Uses increased cone area for efficient output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Frame Size:\u003c\/strong\u003e Compact basket design aids factory-location fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe REF467F uses Infinity Reference-series engineering, including edge-driven textile tweeters, Plus One woofer cone architecture, and an optimized speaker frame. Its 4x6-inch coaxial construction keeps the woofer and tweeter together in a single assembly, making it appropriate for locations that do not provide separate tweeter mounts. The speaker's specified external dimensions are 6-3\/16 by 3-15\/16 inches, with a total depth of 2-3\/16 inches.\u003c\/p\u003e\u003cp\u003eVerify that the vehicle has adequate clearance for the 1-7\/8-inch mounting depth and a compatible 5-9\/16 by 3-3\/8-inch mounting cutout. Install each speaker with correct positive and negative polarity, use the supplied foam mounting tape as appropriate, and check whether vehicle-specific adapters, brackets, harnesses, or fasteners are needed. The package includes one pair of coaxial speakers and an owner's manual; confirm fitment before installation.\u003c\/p\u003e","brand":"INFINITY","offers":[{"title":"Default Title","offer_id":45777129734335,"sku":"INFSPKRF467FUS","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61rRmnqToiL.jpg?v=1782493766"},{"product_id":"cerwin-vega-cer-h746","title":"Cerwin-Vega H746 4\"x6\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Cerwin-Vega H746 is a pair of 4\" x 6\" HED Series coaxial car speakers designed to replace factory speakers in compatible vehicle locations. Its compact format is suited to many door, dash, and rear-deck applications that use a 4\" x 6\" opening. The two-way design combines woofer and tweeter elements in each speaker for a straightforward full-range upgrade.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for drivers who want clearer everyday playback from a factory radio or a modest aftermarket system. With 40 watts RMS handling per speaker and a 4-ohm load, they can be matched with compatible head-unit power or an appropriately rated amplifier. Their 86 dB sensitivity specification provides a useful reference when comparing output requirements with other speakers.\u003c\/p\u003e\u003cp\u003eThe H746 uses a polypropylene cone with a treated-foam surround to handle midrange and lower-frequency duties. A 1-inch balanced-dome PEI tweeter is used for high-frequency reproduction. Together, the coaxial layout keeps the installation compact while covering the listed 60 Hz to 20 kHz frequency-response range.\u003c\/p\u003e\u003cp\u003eIts construction includes a stamped-steel basket and ferrite magnet motor structure. The speaker also uses a 1-inch voice coil and an internal crossover, so a separate external passive crossover is not required for its integrated tweeter. These details make the H746 a practical replacement-speaker design rather than a component-speaker system.\u003c\/p\u003e\u003cp\u003eThe H746 can be used as a direct-size replacement where vehicle fitment, mounting depth, and cutout dimensions are confirmed before installation. It is sold as a pair, providing left and right speakers for one 4\" x 6\" location pair. For a more extensive audio upgrade, it can be paired with compatible wiring, mounting hardware, sound treatment, and amplification selected for the vehicle.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4\" x 6\" Size:\u003c\/strong\u003e Fits applications designed for this compact speaker format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40W RMS Per Speaker:\u003c\/strong\u003e Supports continuous power handling for compatible systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides a durable cone material for everyday playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Balanced-Dome Tweeter:\u003c\/strong\u003e Handles high-frequency detail within the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Crossover:\u003c\/strong\u003e Directs frequencies between the integrated drivers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H746 uses a polypropylene cone, treated-foam surround, Mylar diaphragm material, stamped-steel basket, and ferrite ceramic magnet. Its integrated 1-inch PEI balanced-dome tweeter and internal crossover keep the speaker assembly self-contained. The construction is designed for standard in-vehicle speaker replacement use.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts 4\" x 6\" speakers and verify the 5.6\" x 3.5\" mounting cutout and 1.8\" mounting-depth requirements before purchase. Connect each speaker to a compatible 4-ohm channel and use secure mounting hardware and correct-polarity wiring. Factory-grille clearance, adapter brackets, wiring harnesses, and installation accessories should be checked for the specific vehicle because they are not confirmed as included.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":45777990320319,"sku":"CER-H746","price":34.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61bcfLYtHIL.jpg?v=1782496729"},{"product_id":"cerwin-vega-cer-h46","title":"Cerwin-Vega H46 4\"x6\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H46 is a pair of 4\" x 6\" 2-way coaxial full-range car speakers for replacing compatible factory speakers or refreshing an existing vehicle audio system. Its compact oval format is intended for vehicle locations that accept 4\" x 6\" speakers. The pair combines a woofer and centrally mounted tweeter to cover bass, midrange, and high-frequency playback from a single speaker location.\u003c\/p\u003e\u003cp\u003eEach H46 uses a polypropylene woofer cone with a UV-treated foam surround. This combination is designed to support responsive midbass and midrange reproduction while maintaining the cone's movement at the speaker edge. A 1\" PEI tweeter handles the upper frequencies for added detail in vocals, percussion, and instruments.\u003c\/p\u003e\u003cp\u003eThe H46 is rated for 50 watts RMS and 150 watts maximum power handling, with a 4-ohm nominal impedance. Its published frequency response is 83 Hz to 20 kHz, with a sensitivity rating of 83 dB at 1 watt\/1 meter. These specifications make it suited to compatible factory-radio replacement applications or systems using appropriately matched external amplification.\u003c\/p\u003e\u003cp\u003eAn integrated crossover directs frequencies between the woofer and tweeter, while tweeter protection is included to help safeguard the high-frequency driver. The tweeter uses a neodymium magnet, and the woofer uses a strontium ferrite magnet. Together, these components support the H46's coaxial design without requiring separate external crossover hardware.\u003c\/p\u003e\u003cp\u003eThe H46 is sold as a pair for matching left and right speaker positions. Its 1.73\" mounting depth can be helpful where installation space is limited, but vehicle fitment should still be checked before purchase. For a more complete audio upgrade, these speakers can be paired with a compatible 4-ohm source unit or amplifier and installed in properly sized factory or custom locations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4\" x 6\" Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in one compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS Power Handling:\u003c\/strong\u003e Supports appropriately matched factory-radio or amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\" PEI Tweeter:\u003c\/strong\u003e Reproduces high frequencies in the coaxial speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides a responsive woofer diaphragm for full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover:\u003c\/strong\u003e Directs frequencies between woofer and tweeter with tweeter protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped Steel Basket:\u003c\/strong\u003e Provides a rigid mounting structure for the speaker components.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H46 uses a responsive polypropylene cone, UV-treated foam surround, dynamically balanced PEI tweeter, and powder-coated rigid stamped steel basket. A strontium ferrite woofer magnet and neodymium tweeter magnet are used in the driver assembly. The speakers are supplied as a matched pair and do not include grilles.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 4\" x 6\" speaker and compare available space with the 5.71\" x 3.50\" cutout requirement, 1.73\" mounting depth, and 6.10\" x 4.02\" overall dimensions. Use a compatible 4-ohm audio source or amplifier, and follow vehicle-specific wiring and mounting practices. Because fitment hardware and wiring accessories are not specified, installers should verify what their vehicle requires before installation.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":45778008834239,"sku":"CER-H46","price":43.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71kZfYP6ewL.jpg?v=1782496901"},{"product_id":"cerwin-vega-cer-v46","title":"Cerwin-Vega V46 4\" x 6\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega V46 is a pair of 4\" x 6\" 2-way coaxial car speakers made for replacing factory-installed speakers or building a compact vehicle audio upgrade. Their coaxial layout places the tweeter and woofer in one speaker assembly, helping fit full-range sound into locations designed for 4\" x 6\" speakers. The V46 is rated at 4 ohms and sold as a matched stereo pair.\u003c\/p\u003e\u003cp\u003eDesigned for drivers who want more detail and presence from an existing audio system, the V46 combines a dedicated silk dome tweeter with a hybrid carbon fiber\/polypropylene woofer cone. This arrangement is intended to reproduce highs, midrange information, and bass content from a single mounting location. Its 87 Hz–20 kHz frequency response and 86 dB sensitivity provide useful specifications for matching the speakers to compatible vehicle audio equipment.\u003c\/p\u003e\u003cp\u003eThe woofer uses a hybrid carbon fiber\/polypropylene cone paired with a Santoprene rubber surround. The cone construction is designed for controlled sound reproduction, while the rubber surround supports cone movement and long-term durability. A strontium ferrite woofer magnet provides the motor structure for the low- and mid-frequency driver.\u003c\/p\u003e\u003cp\u003eFor high-frequency reproduction, each V46 uses a dynamically balanced silk dome tweeter with a neodymium magnet. An integrated crossover directs the appropriate frequency range to the tweeter and woofer. Built-in tweeter protection is included to help safeguard the tweeter during higher-volume operation.\u003c\/p\u003e\u003cp\u003eThe V46 can serve as a direct-size upgrade where the vehicle has adequate 4\" x 6\" mounting space and clearance. Confirm the required cutout, mounting depth, and overall dimensions before purchase, as factory mounting patterns vary by vehicle. For a balanced system, use the pair together in corresponding left and right speaker locations and match them with compatible 4-ohm amplification.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4\" x 6\" Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Power Handling:\u003c\/strong\u003e Supports continuous power handling up to 60 watts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid CF\/PP Cone:\u003c\/strong\u003e Blends carbon fiber and polypropylene cone materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSantoprene Rubber Surround:\u003c\/strong\u003e Supports cone movement and everyday durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilk Dome Tweeter:\u003c\/strong\u003e Provides dedicated high-frequency reproduction with a neodymium magnet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover Protection:\u003c\/strong\u003e Directs frequencies and helps protect the tweeter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe V46 uses a powder-coated rigid stamped-steel basket, hybrid carbon fiber\/polypropylene cone, Santoprene rubber surround, silk dome tweeter, neodymium tweeter magnet, and strontium ferrite woofer magnet. These parts are integrated into a 2-way coaxial speaker assembly. No grilles are included.\u003c\/p\u003e\u003cp\u003eMeasure the available mounting location before installation. Each speaker requires a 5.71\" x 3.50\" cutout and 1.75\" of mounting depth, with an overall footprint of 6.10\" x 4.02\" and a 2.11\" overall height. Use vehicle-appropriate mounting hardware and wiring connections, and confirm that the connected head unit or amplifier is compatible with a 4-ohm speaker load.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":45778009718975,"sku":"CER-V46","price":64.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71gWodx6aRL.jpg?v=1782496909"},{"product_id":"pioneer-ts-a4671f","title":"Pioneer TS-A4671F 4\" x 6\" 4-Way Coaxial Speakers","description":"\u003cp\u003eThe Pioneer TS-A4671F is a pair of 4\" x 6\" four-way coaxial car speakers designed to replace compatible factory speakers. It provides a practical upgrade path for vehicles whose original speakers sound worn, limited, or unclear. Its 4-ohm design works with many factory and aftermarket car stereos, subject to vehicle fitment and wiring compatibility.\u003c\/p\u003e\u003cp\u003eEach speaker combines a 4\" x 6\" woofer, 42 mm midrange, 11 mm tweeter, and 11 mm super tweeter in one coaxial assembly. This multi-driver layout is intended to distribute low, middle, and high frequency reproduction among dedicated drivers. The result is a broad stated frequency response from 34 Hz to 49 kHz.\u003c\/p\u003e\u003cp\u003eThe TS-A4671F is rated for 30 watts RMS and up to 210 watts maximum power handling. Its 88 dB sensitivity rating supports use with modest-power factory radios while leaving room for a properly matched external amplifier. The nominal 4-ohm impedance is a common match for car-audio speaker outputs.\u003c\/p\u003e\u003cp\u003ePioneer uses a carbon- and mica-reinforced injection-molded polypropylene woofer cone to balance low mass with rigidity. A cellulose-fiber cone serves the midrange, while PET hard-dome drivers handle the tweeter and super-tweeter duties. The A-Series Open \u0026amp; Smooth concept is designed to support a more consistent off-axis response in vehicle interiors.\u003c\/p\u003e\u003cp\u003eThese speakers are suited to a stock-location replacement where a 4\" x 6\" opening is available and mounting clearance has been verified. They can be used with a factory head unit or as part of a larger system that adds an amplifier and compatible source unit. Confirm the cutout, mounting depth, terminal clearance, and vehicle-specific mounting pattern before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Way Coaxial Layout:\u003c\/strong\u003e Integrates woofer, midrange, tweeter, and super tweeter drivers in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30W RMS Handling:\u003c\/strong\u003e Supports everyday use with factory radios or matched amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e210W Maximum Power:\u003c\/strong\u003e Provides short-term peak power handling capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon\/Mica IMPP Woofer:\u003c\/strong\u003e Uses a reinforced polypropylene cone for controlled cone movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen \u0026amp; Smooth Design:\u003c\/strong\u003e Supports more consistent off-axis response in vehicle interiors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches the common impedance used by many car audio systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-A4671F uses an iron-plate pressed basket, a carbon- and mica-reinforced IMPP woofer cone, a cellulose-fiber midrange diaphragm, and PET hard-dome high-frequency drivers. Its woofer uses a ferrite magnet, while the tweeter assembly uses neodymium magnet material. Additional construction details include an aramid-fiber damper, rolled rubber-coated cloth surround, glass-imide voice-coil bobbin, and copper-clad aluminum voice-coil wire.\u003c\/p\u003e\u003cp\u003eVerify that the vehicle accepts a 4\" x 6\" speaker with a 95 x 153 mm cutout and 42 mm mounting depth. Connect the speakers to compatible 4-ohm speaker outputs and ensure the leads and terminals cannot contact metal. The package includes mounting-related accessories, but vehicle-specific adapters or wiring harnesses may still be needed depending on the application.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809477025983,"sku":"TS-A4671F","price":51.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61aosgsexAL.jpg?v=1783109857"},{"product_id":"pioneer-ts-g4620s","title":"Pioneer TS-G4620S 4\" x 6\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Pioneer TS-G4620S is a pair of 4\" x 6\" two-way coaxial car speakers designed to replace worn or limited factory speakers. Its compact oval format fits many common vehicle speaker locations while providing a straightforward path to refreshed sound. With a 4-ohm nominal impedance and 30-watt nominal power handling, it is suited to systems using factory or modest aftermarket amplification.\u003c\/p\u003e\u003cp\u003eEach speaker combines a 4\" x 6\" woofer and centrally mounted balanced-dome tweeter in one coaxial assembly. This two-way layout covers low, midrange, and high-frequency content through a single mounting location. The result is a practical upgrade for listeners seeking clearer everyday music playback without converting the vehicle to a separate-component system.\u003c\/p\u003e\u003cp\u003eA mica-reinforced Injected Molded Polypropylene (IMPP) woofer cone forms the foundation of the TS-G4620S design. The lightweight cone construction is paired with Pioneer's Progressive Flex Suspension System spider and a Conex damper. Together, these components support controlled cone movement and dependable operation within the speaker's rated power range.\u003c\/p\u003e\u003cp\u003eThe 30 mm PET hard-dome balanced-dome tweeter is intended to handle upper-frequency detail, while the speaker's specified response extends from 35 Hz to 22 kHz. Its 89 dB sensitivity rating helps it produce useful output from lower-powered car-stereo channels. This makes the pair a sensible option for restoring front or rear factory locations where space and available power are limited.\u003c\/p\u003e\u003cp\u003eInstallation-oriented details include a shallow 1-5\/8\" mounting depth and a 153 mm x 95 mm cutout reference. The package includes mounting hardware and short wire extensions to support typical replacement work. Vehicle fit should still be confirmed by checking the factory opening, available depth, mounting-hole layout, and connector requirements before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4\" x 6\" Coaxial Format:\u003c\/strong\u003e Combines woofer and tweeter in one compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Design:\u003c\/strong\u003e Separates broad frequency duties between woofer and tweeter drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-Watt Nominal Rating:\u003c\/strong\u003e Matches moderate-power factory and aftermarket audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMica-Reinforced IMPP Cone:\u003c\/strong\u003e Provides a lightweight woofer cone construction for everyday playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30 mm PET Dome Tweeter:\u003c\/strong\u003e Reproduces high-frequency information through a balanced-dome design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow Mounting Depth:\u003c\/strong\u003e Helps accommodate vehicle locations with limited clearance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-G4620S uses a 95 mm x 153 mm woofer, mica-reinforced IMPP cone, 110 g woofer magnet, and 30 mm balanced-dome tweeter. Pioneer also specifies a Conex damper and its P.F.S.S. spider as parts of the speaker construction. Each speaker weighs 0.37 kg including accessory parts.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 4\" x 6\" speaker and allows approximately 1-5\/8\" of mounting depth before ordering. The included mounting adapters, screws, nuts, washers, and 30 cm wire extensions can assist with installation, but vehicle-specific brackets or wiring adapters may still be needed. Connect the speakers to channels compatible with a 4-ohm load, observe polarity, and keep terminals and leads from contacting metal vehicle parts.\u003c\/p\u003e","brand":"PIONEER","offers":[{"title":"Default Title","offer_id":45809477648575,"sku":"TS-G4620S","price":35.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61w7bMsXVUL.jpg?v=1783109894"},{"product_id":"jbl-jblspks3648f","title":"JBL STAGE3 648F 4x6\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe JBL STAGE3 648F is a pair of 4x6-inch coaxial car speakers designed for vehicles that use this factory speaker format. It combines a woofer and tweeter in each speaker, providing a straightforward replacement path for worn or basic factory speakers. The set is supplied without grilles for installations that retain the vehicle's original speaker grilles or trim panels.\u003c\/p\u003e\u003cp\u003eWith 60 watts RMS power handling per speaker, the STAGE3 648F can be used with a compatible factory head unit or a 4-ohm-capable aftermarket amplifier. Its 89 dB sensitivity and 50 Hz to 20 kHz frequency response support full-range front or rear speaker replacement duties. The true 4-ohm design is intended to help make effective use of available amplifier or head-unit power.\u003c\/p\u003e\u003cp\u003eEach speaker uses JBL's Plus One woofer cone architecture, which increases usable cone area relative to conventional designs in its class. The woofer cone is reinforced with 10% glass fiber and formed with a laser-etched surface treatment. This construction is intended to support low-frequency output while maintaining a compact 4x6-inch footprint.\u003c\/p\u003e\u003cp\u003eA PEI balanced dome tweeter handles the high-frequency portion of the coaxial design. Locating the tweeter within the speaker assembly keeps the installation simple compared with a separate component speaker system. This makes the STAGE3 648F a practical option for listeners seeking a compact two-way upgrade without adding external crossover boxes or separate tweeter mounting locations.\u003c\/p\u003e\u003cp\u003eThe Stage3 Gen2 design also incorporates post-consumer recycled plastic components, PVC-free wiring, and packaging printed with soy-based inks. Installation hardware is included, including screws, spade clips, foam gaskets, and logo badges. Confirm the vehicle's factory opening, mounting depth, wiring, and retained-grille arrangement before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4x6-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Handling:\u003c\/strong\u003e Supports compatible factory or aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Woofer Architecture:\u003c\/strong\u003e Provides increased cone area within the frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Balanced Dome Tweeter:\u003c\/strong\u003e Reproduces the speaker's high-frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue 4-Ohm Load:\u003c\/strong\u003e Matches common car audio amplifier loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser-Etched Glass-Fiber Cone:\u003c\/strong\u003e Uses 10% glass-fiber reinforcement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe STAGE3 648F uses a laser-etched woofer cone reinforced with 10% glass fiber, a PEI balanced dome tweeter, and post-consumer recycled plastic components. Its wiring is PVC-free, and the speakers are finished in black. No speaker grilles are included with this factory-fit-oriented version.\u003c\/p\u003e\u003cp\u003eUse the included screws, spade clips, and foam gaskets as appropriate for the vehicle installation. Verify that the vehicle accepts a 4x6-inch speaker, that the mounting depth and terminal clearance are suitable, and that the factory wiring can be connected safely. Pair the speakers with a 4-ohm-compatible head unit or amplifier and avoid exceeding their 60-watt RMS rating per speaker.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45809507598527,"sku":"JBLSPKS3648F","price":38.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/57_932bbf30-97ed-4597-80c1-70e9bc16cc56.png?v=1783111529"},{"product_id":"memphis-srx462v","title":"Memphis SRX462V 4x6\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Memphis SRX462V is a pair of 4x6-inch, 2-way coaxial car speakers from the Street Reference series. It is designed for vehicles that use 4x6-inch factory speaker locations and need a straightforward replacement or audio-system refresh. With a compact profile and coaxial layout, each speaker combines its woofer and tweeter in one assembly.\u003c\/p\u003e\u003cp\u003eThese speakers are rated for 30 watts RMS and 60 watts peak power handling per speaker. Their 88 dB sensitivity and 4-ohm impedance make them appropriate for many factory-radio or modest amplified speaker applications. Match the amplifier or receiver output carefully to the stated power rating for reliable operation.\u003c\/p\u003e\u003cp\u003eA polypropylene cone handles the main driver duties, while a rubber surround supports controlled cone movement. The integrated PEI tweeter adds high-frequency reproduction to the 2-way design. Together, these materials provide a practical speaker construction for daily vehicle use.\u003c\/p\u003e\u003cp\u003eThe SRX462V uses a slim 1.68-inch mounting depth to help it fit locations where rear clearance is limited. Its listed cutout requirement is 3.95 by 5.9 inches, so checking the vehicle opening and mounting surface before installation is important. Vehicle-specific brackets, adapters, or wiring harnesses may still be needed depending on the factory setup.\u003c\/p\u003e\u003cp\u003eThis pair is a sensible option when replacing worn factory 4x6-inch speakers or building a simple front, rear, or dash speaker upgrade. It can be used with a compatible factory head unit or an aftermarket receiver, provided the vehicle wiring and mounting arrangement are suitable. Optional grilles are not included with this model.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4x6-Inch Size:\u003c\/strong\u003e Fits applications designed for 4x6-inch speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides a durable main-driver diaphragm material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Tweeter:\u003c\/strong\u003e Handles high-frequency detail within the coaxial design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber Surround:\u003c\/strong\u003e Supports cone movement and long-term durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlim Mounting Depth:\u003c\/strong\u003e Uses only 1.68 inches of mounting depth.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe SRX462V combines a polypropylene woofer cone, rubber surround, and PEI tweeter in a compact 4x6-inch coaxial speaker format. Each speaker has a 6.5-ounce magnet and is rated at 4 ohms. The pair is finished in black and gray.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle has a 4x6-inch mounting location, at least 1.68 inches of mounting depth, and a 3.95 by 5.9-inch cutout before ordering. Use compatible speaker wiring or vehicle-specific harness adapters as needed, and verify polarity when connecting the speakers. The package includes two speakers and two 12-inch speaker leads; mounting hardware or adapters are not specified.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45834449715391,"sku":"SRX462V","price":24.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81i17ktN5KL.jpg?v=1783627934"},{"product_id":"memphis-prx46","title":"Memphis PRX46 4x6\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Memphis PRX46 is a pair of 4x6-inch, 2-way coaxial car speakers designed for replacing or upgrading compatible factory speaker locations. Its compact format helps address the limited space often found in dash, door, or rear-deck 4x6-inch applications. Each speaker combines a woofer and tweeter in one assembly for straightforward full-range speaker replacement.\u003c\/p\u003e\u003cp\u003eWith 30 watts RMS and 60 watts peak handling per speaker, the PRX46 is suited to modest-power car audio systems. Its 4-ohm impedance supports use with compatible factory or aftermarket audio equipment. The 86 dB sensitivity rating and 125 Hz to 20 kHz frequency response define its published operating specifications.\u003c\/p\u003e\u003cp\u003eThe speaker uses a polypropylene woofer cone with a polyurethane surround. This material combination is intended to provide a durable moving assembly for midrange and upper-bass reproduction. A PEI dome tweeter handles higher-frequency content within the coaxial design.\u003c\/p\u003e\u003cp\u003eA multi-direction pivot tweeter system lets the installer aim the tweeter during installation. This can be useful when the speaker location is off-axis from the listening position. The integrated 6 dB tweeter crossover is designed to direct appropriate frequencies to the tweeter.\u003c\/p\u003e\u003cp\u003eThe PRX46 is part of the Memphis Audio Power Reference speaker line and can be used as a focused factory-speaker replacement or as one part of a broader vehicle audio upgrade. Its 2.125-inch mounting depth should be checked against the available depth behind the intended mounting surface. Installation hardware and short speaker leads are included, while grilles are not included.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4x6-Inch Coaxial Format:\u003c\/strong\u003e Combines woofer and tweeter in a compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30W RMS Per Speaker:\u003c\/strong\u003e Supports compatible moderate-power factory or aftermarket systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePivoting PEI Dome Tweeter:\u003c\/strong\u003e Allows high-frequency output to be aimed during installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Provides a durable cone material for full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolyurethane Surround:\u003c\/strong\u003e Supports controlled cone movement and durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated 6 dB Crossover:\u003c\/strong\u003e Routes high-frequency content to the tweeter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX46 uses a black-on-black M-Cone appearance, a polypropylene woofer cone, polyurethane surround, PEI dome tweeter, and an 11-ounce magnet. Its 2-way coaxial layout places the tweeter within the woofer assembly, reducing the need for separately mounted external tweeters. Grilles are not included.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's 4x6-inch speaker opening, mounting pattern, and available 2.125-inch mounting depth before ordering. The package includes two speakers, two 12-inch speaker leads, eight 1-inch screws, eight speed clips, and a user manual. For amplified systems, match the amplifier setup appropriately to the speakers' 4-ohm impedance and 30-watt RMS-per-speaker rating.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":45843353436351,"sku":"PRX46","price":50.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/715Vhu4JaIL.jpg?v=1783901628"}],"url":"https:\/\/nsidistributor.com\/collections\/4x6-inch-speakers.oembed","provider":"NSI Audio Distributing","version":"1.0","type":"link"}