{"title":"10 Inch Subwoofers","description":null,"products":[{"product_id":"gravity-g3-10d2","title":"Gravity G3-10D2 10\" Dual 2-Ohm Car Subwoofer","description":"\u003cp\u003eThe Gravity G3-10D2 is a 10-inch component car subwoofer designed to add dedicated low-frequency output to an aftermarket audio system. It is intended for listeners who want more bass authority than factory full-range speakers can provide. Because it is a passive subwoofer driver, it is designed to be used with an external amplifier and a properly built enclosure.\u003c\/p\u003e\u003cp\u003eThis model uses dual 2-ohm voice coils, giving installers wiring flexibility when matching the subwoofer to a compatible mono or multi-channel amplifier. Its 750-watt RMS power rating and 1,500-watt maximum power handling make amplifier selection and gain setup important. The DVC design can support series or parallel wiring arrangements, depending on the amplifier's supported impedance load.\u003c\/p\u003e\u003cp\u003eThe G3-10D2 uses a pressed paper cone and high-roll foam surround. This combination is intended to provide cone support and controlled movement during bass reproduction. It is suited to music systems focused on low-end impact while retaining a conventional 10-inch subwoofer format.\u003c\/p\u003e\u003cp\u003eAn airflow cooling design is specified to help manage heat around the voice-coil assembly during sustained use. The subwoofer also uses a high-flux motor design to support its low-frequency operation. These construction details are aimed at maintaining consistent operation when the driver is installed and powered appropriately.\u003c\/p\u003e\u003cp\u003eThe G3-10D2 can serve as a single-subwoofer bass upgrade or as part of a multi-subwoofer system. Final performance depends on enclosure design, amplifier capability, electrical-system condition, crossover settings, and correct wiring. Confirm available mounting depth, cutout dimensions, and amplifier load compatibility before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Subwoofer:\u003c\/strong\u003e Provides dedicated bass output in a commonly used car-audio size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Allows flexible series or parallel wiring options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e750-Watt RMS Rating:\u003c\/strong\u003e Supports sustained power matching with a suitable external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,500-Watt Maximum Handling:\u003c\/strong\u003e Indicates the listed short-term maximum power figure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed Paper Cone:\u003c\/strong\u003e Uses a rigid cone material for bass-driver operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow Cooling Design:\u003c\/strong\u003e Helps manage heat during extended listening sessions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe G3-10D2 combines a competition-grade pressed paper cone with a high-roll foam surround and high-flux motor design. Its dual voice-coil terminals are intended for flexible system wiring, while the cooling design supports thermal management during use. It is a passive driver rather than a self-powered enclosure.\u003c\/p\u003e\u003cp\u003eInstall the subwoofer in an enclosure designed for its application and verify physical fit before cutting or mounting. Use an amplifier that is stable at the final impedance created by the selected voice-coil wiring and set gains conservatively. An enclosure, amplifier, wiring, fuse protection, and installation hardware should be selected separately unless specifically included by the seller.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":43910638993599,"sku":"650076328814","price":76.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81gus_k19kL.jpg?v=1734382021"},{"product_id":"gravity-gw-10d2","title":"Gravity GW-10D2 10\" Dual Voice Coil Car Subwoofer","description":"\u003cp\u003eThe Gravity GW-10D2 is a 10-inch car audio subwoofer designed to add dedicated low-frequency output to an aftermarket sound system. It is intended for listeners building a bass-focused upgrade rather than relying on full-range speakers alone. With a published 1,000-watt RMS rating and 2,000-watt peak rating, it is suited to systems with appropriately matched external amplification.\u003c\/p\u003e\u003cp\u003eThis subwoofer uses a dual voice coil configuration, giving installers wiring flexibility when matching the speaker to a compatible mono amplifier. The available product information identifies the coils as 4 ohms each. Final system impedance depends on whether the coils are wired in series or parallel and should be confirmed against the amplifier's supported load.\u003c\/p\u003e\u003cp\u003eThe GW-10D2 uses a pressed paper cone with a high-roll foam surround. This combination is designed to support cone movement while maintaining the durable construction needed for mobile-audio use. Its listed frequency response of 30 Hz to 500 Hz covers the low-bass and upper-bass range normally assigned to a subwoofer.\u003c\/p\u003e\u003cp\u003eAn airflow cooling design is listed to help manage heat during extended operation. Thermal management is especially important when a subwoofer is used near its continuous power rating. Proper gain setting and a clean amplifier signal remain important for reliable operation.\u003c\/p\u003e\u003cp\u003eThe GW-10D2 can serve as the bass foundation of a single-subwoofer system or as part of a multi-subwoofer installation. It requires a suitable enclosure, amplifier, wiring, and installation hardware, which are not identified as included. Choose an enclosure and amplifier configuration based on the vehicle, available space, and the final impedance created by the voice-coil wiring.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Subwoofer:\u003c\/strong\u003e Provides dedicated low-frequency reproduction for an aftermarket car audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000W RMS Rating:\u003c\/strong\u003e Supports continuous-power system designs with a properly matched amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2,000W Peak Rating:\u003c\/strong\u003e Indicates short-duration maximum power handling as published.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Allows series or parallel wiring options for compatible amplifier loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed Paper Cone:\u003c\/strong\u003e Forms the primary moving surface for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow Cooling Design:\u003c\/strong\u003e Helps manage heat during sustained playback.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GW-10D2 combines a competition-grade pressed paper cone with a high-roll foam surround. Its design also includes an airflow cooling system intended to support operation during demanding listening sessions. The published sensitivity is 87 dB, and the stated frequency response is 30 Hz to 500 Hz.\u003c\/p\u003e\u003cp\u003eInstall the subwoofer in an enclosure designed for the driver and securely mount it in the vehicle. Use an external amplifier whose power and minimum stable impedance are appropriate for the final dual-voice-coil wiring configuration. An enclosure, amplifier, wiring, and mounting hardware are required for a complete installation and are not listed as included.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":43910734708927,"sku":"Gravity GW-10D2","price":112.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/1_bdf61b75-b2a7-4039-b128-bb8eff9edcb0.webp?v=1734387425"},{"product_id":"gravity-gw-10d4","title":"Gravity GW-10D4 10\" Dual 4-Ohm Car Audio Subwoofer","description":"\u003cp\u003eThe Gravity GW-10D4 is a 10-inch component car-audio subwoofer designed to add dedicated low-frequency output to a vehicle sound system. It is intended for listeners building or upgrading a system that needs bass reproduction beyond what smaller full-range speakers typically provide. Its single-subwoofer format makes it suitable for custom enclosure projects and systems where space is limited.\u003c\/p\u003e\u003cp\u003eThis model uses a dual 4-ohm voice-coil configuration, giving an installer wiring flexibility when matching the subwoofer to a compatible amplifier. The rated continuous power handling is 1000 watts RMS, with a 2000-watt peak rating. Careful amplifier selection and gain setting are important for using its power capability appropriately.\u003c\/p\u003e\u003cp\u003eThe GW-10D4 is specified for a 30 Hz to 500 Hz frequency-response range and an 87 dB sensitivity rating. Its performance focus is on the lower registers that provide weight and impact in music. A properly configured subwoofer enclosure, crossover, and amplifier setup will determine how it integrates with the rest of the vehicle audio system.\u003c\/p\u003e\u003cp\u003eGravity builds the GW-10D4 around a competition-grade pressed paper cone and a high-roll foam surround. This material combination is designed to support controlled cone movement while providing durability in a high-output subwoofer application. The subwoofer also uses a high-flux motor structure to support its bass-focused design.\u003c\/p\u003e\u003cp\u003eAn advanced airflow cooling design is part of the GW-10D4 construction. This feature is intended to help manage heat during sustained playback. The result is a component subwoofer suited to enthusiasts who want to add a dedicated bass driver to a compatible amplified car-audio system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Subwoofer:\u003c\/strong\u003e Compact bass-driver size for custom vehicle audio installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Provides wiring flexibility for compatible amplifier systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1000W RMS Rating:\u003c\/strong\u003e Supports sustained power handling in properly matched systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2000W Peak Rating:\u003c\/strong\u003e Indicates short-duration maximum power-handling capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed Paper Cone:\u003c\/strong\u003e Competition-grade cone material supports bass-focused performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow Cooling Design:\u003c\/strong\u003e Helps manage heat during extended operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GW-10D4 combines a pressed paper cone, high-roll foam surround, high-flux motor, and airflow cooling design. These elements are intended for a durable, bass-oriented component subwoofer build. The 10-inch driver format is designed for installation in a separate, compatible enclosure rather than as a self-powered speaker system.\u003c\/p\u003e\u003cp\u003eUse this subwoofer with an external amplifier that is compatible with its dual 4-ohm voice-coil configuration and power ratings. The final load presented to the amplifier depends on how the voice coils are wired, so wiring should be planned around the amplifier's supported impedance range. Confirm enclosure dimensions, mounting requirements, and system crossover settings before installation, as mounting depth and cutout specifications were not confirmed.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":43910749257919,"sku":"650076328944","price":106.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/1_987b1ae2-dff8-4c89-8520-67764fa83134.webp?v=1734388181"},{"product_id":"gravity-warzone-wz10d4-1-10-inch-1200-watt-max-power-elite-car-audio-shallow-subwoofer-4-ohm-dvc-dual-voice-coil-stereo-competition-grade-sub-single-subwoofer","title":"Warzone WZ10D4 10\" Shallow Dual 4-Ohm Subwoofer","description":"\u003cp\u003eThe Warzone WZ10D4 is a 10-inch shallow-mount car audio subwoofer designed to add low-frequency output where installation depth is limited. Its compact format makes it a practical option for custom enclosures in trucks, hatchbacks, sedans, and other vehicles with restricted mounting space. The dual 4-ohm voice-coil design provides wiring flexibility when matching the subwoofer to a compatible amplifier.\u003c\/p\u003e\u003cp\u003eRated for 400 watts RMS and 1,200 watts peak power, the WZ10D4 is intended for systems that need controlled bass without requiring a full-depth woofer. Its 40-500 Hz frequency-response rating covers the bass and upper-bass range commonly assigned to a subwoofer. Proper amplifier gain and crossover setup are important for clean operation and long-term reliability.\u003c\/p\u003e\u003cp\u003eA competition-grade carbon-fiber cone is paired with a treated rubber surround to support cone control and durability during normal car-audio use. The design also incorporates a high-roll foam surround, which accommodates cone movement while maintaining the shallow-subwoofer format. Together, these components support a responsive bass character for music systems focused on low-end reinforcement.\u003c\/p\u003e\u003cp\u003eThe WZ10D4 uses dual 4-ohm voice coils, allowing a single subwoofer to be wired to a 2-ohm load in parallel or an 8-ohm load in series. This gives installers options when selecting a mono amplifier or planning a multi-subwoofer system. Always confirm that the final speaker load is within the amplifier's rated stable impedance range.\u003c\/p\u003e\u003cp\u003eA 2.5-inch voice coil, ferrite magnet structure, and advanced airflow cooling system are part of the WZ10D4's motor assembly. These features are intended to support power handling and heat management during sustained playback. It can be used in a properly built sealed or ported enclosure, with enclosure selection and tuning matched to the vehicle and amplifier setup.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Shallow Design:\u003c\/strong\u003e Helps fit bass reinforcement into installations with limited mounting depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400W RMS Handling:\u003c\/strong\u003e Supports amplifier matching for sustained subwoofer power delivery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Provides series or parallel wiring options for compatible amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon-Fiber Cone:\u003c\/strong\u003e Supports a rigid diaphragm for controlled low-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5-Inch Voice Coil:\u003c\/strong\u003e Forms part of the subwoofer's power-handling motor assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow Cooling System:\u003c\/strong\u003e Supports heat management during extended playback sessions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ10D4 combines a carbon-fiber cone, treated rubber surround, high-roll foam surround, ferrite magnet structure, and 2.5-inch voice coil in a shallow 10-inch chassis. This construction is intended for car-audio systems where space is constrained but a dedicated subwoofer is still desired. The subwoofer is designed for wired automotive audio installations.\u003c\/p\u003e\u003cp\u003eInstall the WZ10D4 securely in a rigid, properly sealed enclosure and leave adequate clearance for cone movement and terminal connections. A compatible external amplifier, speaker wire, enclosure, and installation hardware are required. Set a low-pass crossover on the amplifier or source unit, match the amplifier to the selected 2-ohm or 8-ohm wiring load, and avoid using excessive gain that causes audible distortion.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":43913015066815,"sku":"738944400876","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81vDb33UuhS_27afe987-2a2a-4500-a879-bc95c3c19c6a.jpg?v=1734469873"},{"product_id":"gravity-warzone-wz100st-10-pro-audio-active-compact-under-seat-slim-aluminum-1000-watts-4-ohm-subwoofer-powerful-loud-speaker-with-bass-volume-control-knob","title":"Gravity Warzone WZ100ST 10\" Powered Under-Seat Subwoofer","description":"\u003cp\u003eThe Gravity Warzone WZ100ST is a compact 10-inch powered subwoofer designed for vehicle installations where a conventional subwoofer enclosure would take up too much space. Its slim, under-seat-oriented form factor adds low-frequency reinforcement while preserving usable cabin or cargo room. The integrated amplifier combines the subwoofer and amplification in one enclosure, simplifying the system layout.\u003c\/p\u003e\u003cp\u003eThis model is suited to drivers upgrading a factory or aftermarket stereo that needs more bass presence without a large trunk-mounted enclosure. It supports both low-level and high-level input connections, allowing it to work with head units that do or do not have RCA outputs. Automatic turn-on capability is provided for high-level connection setups.\u003c\/p\u003e\u003cp\u003eThe WZ100ST is specified with up to 1000 watts of maximum power and a 4-ohm 10-inch subwoofer. Its listed signal-to-noise ratio is 90 dB, and the enclosure uses a passive radiator as part of its compact bass design. A variable low-pass filter helps limit the unit's output to the lower frequencies intended for subwoofer use.\u003c\/p\u003e\u003cp\u003eSound adjustment controls include variable bass boost, phase adjustment, and a fixed subsonic filter. The bass boost range is listed at 0 to 12 dB, while the subsonic filter is fixed at 20 Hz. A wired remote bass-level control gives the driver a convenient way to adjust bass output from the seating area.\u003c\/p\u003e\u003cp\u003eAn aluminum enclosure gives the WZ100ST a durable, low-profile housing for vehicle use. At 13.6 inches long, 10.3 inches wide, and 3.2 inches high, it is intended for tight spaces such as beneath a seat when vehicle clearance permits. It can serve as a self-contained bass upgrade alongside factory speakers, component speakers, or a full aftermarket audio system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Powered Subwoofer:\u003c\/strong\u003e Combines a 10-inch driver and integrated amplification in one compact enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlim Under-Seat Format:\u003c\/strong\u003e Helps add bass in vehicles with limited available installation space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- And Low-Level Inputs:\u003c\/strong\u003e Supports connection to factory speaker outputs or RCA-equipped head units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Bass Boost:\u003c\/strong\u003e Provides 0 to 12 dB of adjustable low-frequency emphasis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Bass Remote:\u003c\/strong\u003e Allows convenient adjustment of bass level from the front seating area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Enclosure:\u003c\/strong\u003e Uses a durable metal housing designed for a compact vehicle installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ100ST uses a slim aluminum enclosure with a vented, passive-radiator design. Its 3.2-inch height is intended to make placement possible in restricted vehicle locations while the metal housing supports a durable installation. The enclosure contains the active subwoofer system, so a separate external subwoofer amplifier is not required.\u003c\/p\u003e\u003cp\u003eBefore installation, measure the selected location against the unit's 13.6 x 10.3 x 3.2-inch dimensions and verify that seat movement, wiring, ventilation, and vehicle safety components will not be obstructed. The unit accepts low-level and high-level signal connections; use the appropriate input method for the existing head unit and set the low-pass filter, bass boost, phase control, and remote bass level to blend with the vehicle's main speakers. Professional installation is recommended when routing fused power wiring or working around seats with integrated safety systems.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":43913034465471,"sku":"0990179607127","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/pixelcut-export_2_a6cfe95c-4d9e-439d-9672-c68a51ed179a.png?v=1734471072"},{"product_id":"gravity-warzone-wz10us-10-pro-audio-active-compact-spare-tire-slim-aluminum-1000-watts-2-ohm-subwoofer-powerful-loud-speaker-with-bass-volume-control-knob","title":"WARZONE WZ10US 10\" Powered Spare Tire Subwoofer","description":"\u003cp\u003eThe WARZONE WZ10US is a powered 10-inch spare-tire subwoofer built for vehicles where preserving cargo space matters. Its compact, slim enclosure installs in the hub area of a compatible spare tire, keeping bass reinforcement out of the main trunk or cargo floor. It is intended for drivers who want to add low-frequency output without fitting a conventional subwoofer box.\u003c\/p\u003e\u003cp\u003eThis active subwoofer combines a 10-inch driver and integrated amplification in a sealed enclosure. The published maximum power rating is 1,000 watts, with a stated frequency response of 30Hz to 150kHz. Its 2-ohm subwoofer design and adjustable low-pass filter help it blend with a variety of factory or aftermarket car-audio systems.\u003c\/p\u003e\u003cp\u003eThe WZ10US is designed to deliver focused low-end support for everyday listening while maintaining a discreet installation. A fiberglass woofer cone and rubber surround are used for the driver assembly, while the die-cast aluminum housing is intended to provide a rigid enclosure structure. The spare-tire format makes it particularly useful in sedans, hatchbacks, SUVs, and other vehicles with a suitable tire-well layout.\u003c\/p\u003e\u003cp\u003eSystem tuning features include adjustable bass boost, phase adjustment, gain control, and a variable low-pass filter. The phase control can help correct bass cancellation or timing differences between the subwoofer and the vehicle's main speakers. A wired level remote provides convenient bass-output adjustment from the driver's seating area.\u003c\/p\u003e\u003cp\u003eThe WZ10US supports both RCA-level and speaker-level signal integration. Its auto power on\/off function is designed for high-level connections, which can simplify installation with many factory audio systems. Before purchase, confirm spare-tire-well clearance, mounting arrangement, and professional wiring requirements for the specific vehicle.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpare-Tire Installation:\u003c\/strong\u003e Uses the spare-tire hub area to preserve cargo space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowered 10-Inch Design:\u003c\/strong\u003e Combines a 10-inch subwoofer and integrated amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000-Watt Maximum Power:\u003c\/strong\u003e Provides published high-output bass capability in a compact format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Low-Pass Filter:\u003c\/strong\u003e Adjusts the upper bass range from 40Hz to 150Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Bass Remote:\u003c\/strong\u003e Lets the driver adjust bass level from the cabin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Level Auto Turn-On:\u003c\/strong\u003e Supports integration with speaker-level factory-system signals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ10US uses a sealed, slim enclosure with a die-cast aluminum housing made from high-density material. Its 10-inch woofer uses a fiberglass cone with a rubber surround, and the enclosure is shaped for tire-mount placement. The compact design is intended to remain concealed beneath the vehicle's cargo-floor area when installed in a compatible spare-tire well.\u003c\/p\u003e\u003cp\u003eInstallation requires a compatible spare-tire hub or well, secure mounting, battery power, chassis ground, and an audio signal connection. RCA inputs can be used with an aftermarket receiver, while speaker-level wiring can be used with compatible factory systems and the auto-turn-on feature. Set gain, low-pass filter, phase, and bass boost after installation so the subwoofer integrates cleanly with the vehicle's existing speakers.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":43913040724159,"sku":"Gravity WZ10US","price":179.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71NQ26ceV0L.jpg?v=1734471488"},{"product_id":"warzone-wz10sub-10-inch-1500w-active-vented-subwoofer-with-built-in-class-d-amplifier-remote-control-bass-boost-and-phase-control-for-cars-and-trucks","title":"Warzone WZ10SUB 10\" Powered Vented Car Subwoofer","description":"\u003cp\u003eThe Warzone WZ10SUB is a self-powered 10-inch car subwoofer designed to add low-frequency reinforcement without requiring a separate subwoofer amplifier. Its integrated Class-D amplifier and vented enclosure combine the amplifier, driver, and enclosure in one component. This makes it a practical option for car and truck owners building a more complete audio system.\u003c\/p\u003e\u003cp\u003eRated at 500 watts RMS and 1500 watts maximum power, the WZ10SUB is intended for listeners who want more bass weight and impact than factory speakers typically provide. The 10-inch driver and vented enclosure are designed for bass reproduction in a compact, all-in-one format. It is suited to daily-use vehicle systems where installation space and straightforward setup both matter.\u003c\/p\u003e\u003cp\u003eThe built-in amplifier includes a variable low-pass filter adjustable from 50 Hz to 200 Hz. This lets the subwoofer blend more appropriately with the vehicle's main speakers by limiting its output to low frequencies. Bass boost adjustment from 0 to +12 dB and phase control provide additional tuning flexibility for different vehicles and speaker layouts.\u003c\/p\u003e\u003cp\u003eA wired remote bass control allows convenient level adjustment from the driver's seat. RCA signal input supports connection to a compatible source unit or audio system with RCA-level outputs. An auto turn-on selector is also included to support system integration.\u003c\/p\u003e\u003cp\u003eMeasuring 19.37 x 13.31 x 6.38 inches, the WZ10SUB is sized for installations where a traditional large subwoofer enclosure may be impractical. It can serve as a focused bass upgrade in a car or truck while leaving the main speakers responsible for midrange and high-frequency playback. The package includes installation-related accessories to help complete the setup.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Powered Subwoofer:\u003c\/strong\u003e Combines a 10-inch driver, enclosure, and amplifier in one unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Power:\u003c\/strong\u003e Provides a continuous power rating for system matching and setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass-D Amplifier:\u003c\/strong\u003e Uses an integrated amplifier, eliminating the need for a separate subwoofer amp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Low-Pass Filter:\u003c\/strong\u003e Adjusts from 50 Hz to 200 Hz for better speaker blending.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBass And Phase Controls:\u003c\/strong\u003e Helps tailor low-frequency output to the vehicle and system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Remote Bass Control:\u003c\/strong\u003e Lets the driver adjust bass level from the cabin.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ10SUB uses a compact vented enclosure with an integrated amplifier and a single 10-inch subwoofer. Its specified enclosure dimensions are 19.37 x 13.31 x 6.38 inches, and it weighs 27.56 pounds. The manufacturer describes it as a compact design for car and truck audio applications, but does not specify the enclosure material.\u003c\/p\u003e\u003cp\u003ePlan the installation around a secure mounting location, suitable clearance, and access to power, ground, remote-turn-on, and RCA signal connections. Use the supplied RCA signal cables, power input connectors, mounting screws, and wired remote as applicable to the installation. Set the low-pass filter, bass boost, phase control, and remote bass level conservatively at first, then refine them to match the vehicle's speakers and listening preferences.\u003c\/p\u003e","brand":"WARZONE","offers":[{"title":"Default Title","offer_id":44329024782527,"sku":"B0DTN38S18","price":164.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/815ENfg8N6L.jpg?v=1749683346"},{"product_id":"stx-audio-stx10sd4","title":"STX Audio STX10SD4 10\" Shallow-Mount Subwoofer","description":"\u003cp\u003eThe STX Audio STX10SD4 is a 10-inch shallow-mount subwoofer designed for vehicle audio systems with limited installation depth. Its compact profile helps make bass upgrades possible in spaces that may not accommodate a conventional full-depth subwoofer. It is suited to slim enclosures, under-seat applications, and other space-conscious custom installations.\u003c\/p\u003e\u003cp\u003eWith a stated 750-watt RMS power rating and 1,500-watt maximum power handling, the STX10SD4 is intended for systems that need substantial low-frequency capability from a compact driver. Its specified 25 Hz to 500 Hz frequency response supports deep bass reproduction while allowing flexible crossover integration. Proper amplifier matching and enclosure design remain important for reliable performance.\u003c\/p\u003e\u003cp\u003eThis model uses dual 4-ohm voice coils, giving installers multiple wiring configuration options when pairing it with a compatible mono or multi-channel amplifier. The dual-coil design can help accommodate system-planning needs that depend on the amplifier's supported impedance load. Confirm final wired impedance before connecting the subwoofer to an amplifier.\u003c\/p\u003e\u003cp\u003eThe STX10SD4 has a listed 3.23-inch mounting depth, making it a practical choice where enclosure depth is the primary limitation. Its shallow design supports compact box layouts without requiring the clearance of a traditional deep-basket subwoofer. This can be useful in trucks, coupes, sedans, and vehicles with limited cargo-space flexibility.\u003c\/p\u003e\u003cp\u003eA die-cast aluminum basket provides the structural foundation for the driver and is intended to help reduce unwanted basket flex and vibration. The subwoofer can serve as the bass section of a new audio build or as an upgrade to a system that needs a space-efficient low-frequency driver. For best results, pair it with an appropriately rated amplifier, suitable enclosure, and correctly configured crossover.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Shallow-Mount Format:\u003c\/strong\u003e Delivers bass capability while fitting installations with limited depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e750W RMS Power Handling:\u003c\/strong\u003e Supports use with a properly matched high-output amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,500W Maximum Power:\u003c\/strong\u003e Provides stated short-term peak power-handling capacity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Offers wiring flexibility for compatible amplifier configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.23-Inch Mounting Depth:\u003c\/strong\u003e Helps accommodate slim enclosures and tight vehicle spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDie-Cast Aluminum Basket:\u003c\/strong\u003e Provides a rigid driver structure for the installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe STX10SD4 uses a die-cast aluminum basket in a shallow-format 10-inch design. This construction is intended to provide a durable mounting structure while supporting the compact depth requirement. The speaker's shallow profile is its central design advantage for installations where front-to-back clearance is restricted.\u003c\/p\u003e\u003cp\u003eMeasure available mounting depth, enclosure clearance, and cutout requirements before purchase, as a cutout diameter was not confirmed. Use an enclosure appropriate for a 10-inch shallow subwoofer and connect both 4-ohm voice coils according to an amplifier-safe wiring plan. A compatible amplifier, enclosure, wiring, and installation hardware are needed to complete a working system.\u003c\/p\u003e","brand":"STX AUDIO","offers":[{"title":"Default Title","offer_id":45609063645375,"sku":"783501191797","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/a_f0a93423-9b48-4a9a-9ed2-e50b48e76307.jpg?v=1777675955"},{"product_id":"audio360-ad1500us-1500w-10-inch-amplified-subwoofer-under-seat-adjustable-low-pass-filter-bass-boost-control-compact-design-perfect-for-car-audio-systems","title":"Audio360 AD1500US 10\" Powered Under-Seat Subwoofer","description":"\u003cp\u003eThe AUDIO360 AD1500US is a compact powered subwoofer system designed to add low-frequency output to vehicle audio systems without requiring a separate subwoofer enclosure and external amplifier. Its integrated 10-inch, 4-ohm woofer and built-in amplifier are housed in a shallow enclosure intended for under-seat or limited-space installations. It is a practical option for drivers who want more bass while preserving usable cargo and cabin space.\u003c\/p\u003e\u003cp\u003eRated for up to 1500 watts of peak power, the AD1500US is intended to provide added bass impact for factory and aftermarket sound systems. Its published frequency response is 55Hz to 20kHz, with a signal-to-noise ratio above 90dB and total harmonic distortion below 0.4%. These specifications support a clean, controlled addition of low-end reinforcement when the system is set up correctly.\u003c\/p\u003e\u003cp\u003eAn adjustable low-pass filter from 50Hz to 150Hz lets the subwoofer be matched to the frequency range handled by the vehicle's main speakers. This allows the installer to set the handoff point according to the speakers, source unit, and listening preference. A 20Hz subsonic filter is also specified to limit very low frequencies outside the intended operating range.\u003c\/p\u003e\u003cp\u003eThe AD1500US includes variable bass boost adjustment from 0 to +24dB for tailoring bass emphasis. High-level and low-level input options support integration with either factory speaker-output signals or aftermarket receiver preamp signals. Published input sensitivity is 0.9V for high-level input and 300mV for low-level input.\u003c\/p\u003e\u003cp\u003eAt 345 x 262 x 68mm, the enclosure is built for installations where conventional subwoofer boxes are impractical. The slim 68mm profile can suit many under-seat and shallow cargo-area locations, subject to vehicle clearance and safe mounting access. Integrated circuit protection and a 25A fuse are specified to help protect the powered subwoofer during operation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Powered Woofer:\u003c\/strong\u003e Combines a 10-inch 4-ohm woofer and built-in amplifier in one enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1500W Peak Rating:\u003c\/strong\u003e Provides a published maximum peak-power rating for added bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Low-Pass Filter:\u003c\/strong\u003e Offers 50Hz to 150Hz tuning for blending with full-range speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Bass Boost:\u003c\/strong\u003e Adjusts bass emphasis from 0 to +24dB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Input Compatibility:\u003c\/strong\u003e Supports high-level and low-level source connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow Enclosure:\u003c\/strong\u003e Measures 68mm deep for space-conscious vehicle installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD1500US uses an all-in-one powered-subwoofer enclosure design, combining the woofer and amplifier in a compact 345 x 262 x 68mm housing. The published information confirms integrated circuit protection and a 25A fuse, but does not identify the enclosure, cone, or surround materials. Its shallow form factor is designed for applications with restricted mounting depth.\u003c\/p\u003e\u003cp\u003eMount the enclosure securely in a location with adequate clearance, ventilation, and protection from cargo or passenger contact. Use the supplied power and signal wiring harness as applicable, choose high-level input for speaker-output signals or low-level input for receiver preamp signals, and set the low-pass filter and bass boost conservatively before final tuning. Confirm under-seat clearance, wiring routes, and vehicle electrical requirements before installation.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":45613551747263,"sku":"783501184812","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71W8-sfWDzL.jpg?v=1777929813"},{"product_id":"audio360-ads1050-10-inch-car-subwoofer-1500w-max-power-4-ohm-impedance-heavy-duty-construction-ideal-for-sealed-or-ported-enclosures","title":"Audio360 ADS1050 10-Inch Car Subwoofer","description":"\u003cp\u003eThe Audio360 ADS1050 is a 10-inch car subwoofer designed for adding dedicated low-frequency output to a custom vehicle audio system. It is a raw subwoofer driver, so it is intended to be installed in a compatible enclosure and powered by an external amplifier. Its 4-ohm impedance and 750-watt RMS power-handling rating make it suited to systems planned around a single subwoofer channel.\u003c\/p\u003e\u003cp\u003eThis model is for listeners who want to supplement factory or aftermarket full-range speakers with deeper bass reproduction. The 10-inch format offers a compact alternative to larger subwoofers while still supporting substantial power handling. It can be used in a range of vehicle applications when enclosure space and mounting clearance are verified first.\u003c\/p\u003e\u003cp\u003eThe ADS1050 is rated for 750 watts RMS and 1,500 watts maximum power handling. These ratings help guide amplifier selection, with the RMS figure being the more useful number for continuous power matching. A properly adjusted amplifier and correctly configured crossover are important for dependable system operation.\u003c\/p\u003e\u003cp\u003eAudio360 specifies the ADS1050 for either sealed or ported enclosures. A sealed enclosure is generally chosen when a more controlled bass character is desired, while a ported enclosure can be selected when the enclosure is designed for greater output. Enclosure volume, port tuning, and installation details are not specified in the confirmed product data and should be planned separately.\u003c\/p\u003e\u003cp\u003eThe subwoofer uses heavy-duty cone and surround construction for high-output use. Its 5.12-inch mounting depth and 9.06-inch cutout diameter provide the key fitment measurements needed when selecting or building an enclosure. Confirm available depth, cutout size, mounting-hole pattern, and enclosure suitability before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e750W RMS Handling:\u003c\/strong\u003e Supports amplifier matching based on continuous power capacity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1500W Maximum Power:\u003c\/strong\u003e Provides a stated peak power-handling reference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Driver:\u003c\/strong\u003e Adds dedicated bass capability in a space-conscious format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible aftermarket amplifier configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed or Ported Use:\u003c\/strong\u003e Supports different enclosure approaches for system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Fitment:\u003c\/strong\u003e Uses a 5.12-inch mounting depth and 9.06-inch cutout.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ADS1050 is built around a heavy-duty cone and surround assembly intended for car-audio subwoofer duty. Audio360 identifies the driver as suitable for high-output conditions, while the 10-inch size helps it fit installations where larger subwoofers may not be practical. Specific cone material, surround material, voice-coil details, magnet specifications, and sensitivity are not confirmed in the available product information.\u003c\/p\u003e\u003cp\u003eInstall the ADS1050 in a properly constructed sealed or ported enclosure that accommodates its 9.06-inch cutout diameter and at least 5.12 inches of mounting depth. Pair it with a compatible external amplifier, set gain conservatively, and use appropriate filtering to limit the driver to bass frequencies. An enclosure, amplifier, wiring, and mounting hardware should be planned separately unless supplied by the selling package.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":45613560823999,"sku":"783501184478","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/716f0RT12cL.jpg?v=1777930468"},{"product_id":"stx-audio-stx10sd2-10-inch-shallow-subwoofer-1500w-max-power-dual-2-ohm-configuration-ultra-compact-design-ideal-for-limited-spaces","title":"STX Audio STX10SD2 10-Inch Shallow Subwoofer","description":"\u003cp\u003eThe STX Audio STX10SD2 is a 10-inch shallow-mount car subwoofer designed for bass upgrades where conventional subwoofers may be too deep. Its compact mounting profile helps make it a practical option for limited-depth enclosures and space-conscious vehicle installations. It is intended for listeners who want to add low-frequency output without dedicating a large amount of cabin or cargo space.\u003c\/p\u003e\u003cp\u003eWith a stated 750-watt RMS power rating and 1,500-watt maximum power rating, the STX10SD2 is built for use with a properly matched external amplifier. Its 25 Hz to 500 Hz frequency-response range is specified to cover deep bass through upper-bass frequencies. Final output and tonal balance will depend on the enclosure, amplifier settings, vehicle acoustics, and installation quality.\u003c\/p\u003e\u003cp\u003eThe subwoofer uses dual 2-ohm voice coils, giving installers multiple wiring possibilities when designing a system around compatible amplification. This configuration can be useful when matching the subwoofer to an amplifier's supported load and power range. Confirm the final impedance at the amplifier before wiring, particularly when installing multiple subwoofers.\u003c\/p\u003e\u003cp\u003eA shallow 3.23-inch mounting depth is central to the STX10SD2 design. This reduced-depth form factor can support installations in compact custom enclosures, behind-seat locations, or other applications where mounting clearance is limited. The specified 9.29-inch cutout and 10.94-inch overall diameter should be checked against the intended baffle before installation.\u003c\/p\u003e\u003cp\u003eThe STX10SD2 uses a die-cast aluminum basket intended to provide a rigid foundation for the driver assembly. It can serve as the bass component in a custom system paired with an amplifier, enclosure, wiring, and crossover setup selected for the vehicle. For a complete upgrade, use a suitable enclosure and configure low-pass filtering and amplifier gain carefully.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Shallow Subwoofer:\u003c\/strong\u003e Adds bass while requiring limited mounting depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e750W RMS Rating:\u003c\/strong\u003e Supports amplifier matching for sustained power handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,500W Maximum Power:\u003c\/strong\u003e Indicates the stated peak power-handling figure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Provides flexible wiring options for compatible amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.23-Inch Mounting Depth:\u003c\/strong\u003e Helps fit compact and restricted-depth installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDie-Cast Aluminum Basket:\u003c\/strong\u003e Provides a rigid structural frame for the driver.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe STX10SD2 combines a shallow driver profile with a die-cast aluminum basket. Its specified overall diameter is 10.94 inches, while the baffle cutout requirement is 9.29 inches. These measurements should be verified against the enclosure and available vehicle clearance before cutting or mounting.\u003c\/p\u003e\u003cp\u003eThis is a passive subwoofer and requires an external amplifier, speaker wiring, and a compatible enclosure; these items are not specified as included. Match the amplifier to the final voice-coil wiring load and use the 750-watt RMS rating as the primary power-handling reference. Set crossover and gain controls conservatively to suit the enclosure and avoid audible distortion.\u003c\/p\u003e","brand":"STX AUDIO","offers":[{"title":"Default Title","offer_id":45613587955903,"sku":"783501193968","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61kDVRZ2eTL.jpg?v=1777933792"},{"product_id":"stx-audio-stx10msb-10-inch-super-marine-subwoofer-1000w-max-power-rgb-led-waterproof-compact-fit-ideal-for-boats-utvs-atvs","title":"STX Audio STX10MSB 10-Inch Marine RGB Subwoofer","description":"\u003cp\u003eThe STX Audio STX10MSB is a 10-inch marine subwoofer designed to add low-frequency output to boat, UTV, ATV, and other outdoor audio systems. It is intended for installations where conventional full-range speakers need added bass support. The compact mounting dimensions help it fit common marine-style subwoofer locations and custom enclosures.\u003c\/p\u003e\u003cp\u003eRated for 500 watts RMS and 1,000 watts maximum power, the STX10MSB is built for use with an appropriately matched external amplifier. Its stated 30Hz–500Hz frequency response covers the bass and upper-bass range typically assigned to a subwoofer. An 88dB sensitivity rating provides a documented reference point when planning amplifier power and overall system output.\u003c\/p\u003e\u003cp\u003eThis model uses a PC-ABS basket with UV inhibitor material for outdoor-oriented installations. That construction is intended to support use in environments exposed to sun and moisture. The product is listed as waterproof, although no IP rating is specified in the confirmed product information.\u003c\/p\u003e\u003cp\u003eIntegrated RGB LED lighting operates from a 12V system and adds illuminated styling around the subwoofer installation. This makes the STX10MSB suitable for marine and powersports systems where lighting is part of the overall build. Lighting setup should be planned alongside the audio installation to provide the required 12V LED connection.\u003c\/p\u003e\u003cp\u003eFor system upgrades, the STX10MSB can be paired with a compatible subwoofer amplifier rated appropriately for the speaker's RMS power handling. Its 10.00-inch cutout requirement and 4.78-inch mounting depth should be verified before cutting a panel or selecting an enclosure. The subwoofer is a practical fit for listeners seeking dedicated bass in a compact marine or off-road audio layout.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Handling:\u003c\/strong\u003e Supports amplifier matching for sustained bass playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Marine Format:\u003c\/strong\u003e Fits marine-style subwoofer installations and custom enclosures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB LED Lighting:\u003c\/strong\u003e Adds 12V accent lighting to the installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePC-ABS Basket:\u003c\/strong\u003e Uses UV-inhibitor material for outdoor-oriented applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30Hz–500Hz Response:\u003c\/strong\u003e Covers bass and upper-bass frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Mounting Depth:\u003c\/strong\u003e Requires only 4.78 inches behind the panel.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe STX10MSB uses a PC-ABS basket with UV inhibitor material and is listed as waterproof for marine and outdoor use. Its 10.98-inch overall diameter provides a defined panel footprint, while the integrated RGB LED system brings a visual element to the speaker location. No IP rating, cone material, surround material, voice-coil specification, or impedance specification is confirmed.\u003c\/p\u003e\u003cp\u003eConfirm that the mounting surface supports a 10.00-inch cutout and provides at least 4.78 inches of mounting depth; total product depth is listed at 6.46 inches. Use an external amplifier selected around the 500W RMS rating, subject to the amplifier's supported load and the subwoofer's unconfirmed impedance. Plan separate connections for the audio system and the 12V RGB lighting system, and verify supplied hardware and wiring contents with the seller before installation.\u003c\/p\u003e","brand":"STX AUDIO","offers":[{"title":"Default Title","offer_id":45613588938943,"sku":"783501193951","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71zpyXtMwNL.jpg?v=1777934195"},{"product_id":"stx-audio-stx10msw-10-marine-subwoofer-1000w-max-power-rgb-led-lighting-waterproof-marine-compatible","title":"STX Audio STX10MSW 10\" Marine Subwoofer","description":"\u003cp\u003eThe STX Audio STX10MSW is a 10-inch marine subwoofer designed to add low-frequency output to boat, powersports, and outdoor audio systems. It is intended for installations where standard full-range speakers need added bass support. Its marine-compatible construction and integrated RGB lighting make it suited to exposed recreational environments.\u003c\/p\u003e\u003cp\u003eWith a stated 500-watt RMS power rating and 1000-watt maximum power rating, the STX10MSW is built for amplified subwoofer applications. Its 30Hz-500Hz frequency response is specified to cover deep bass through upper-bass output. An 88dB sensitivity rating is provided for system-planning purposes.\u003c\/p\u003e\u003cp\u003eThe subwoofer uses a true 10-inch fitment with a 10.00-inch cutout diameter and 10.98-inch overall diameter. This helps it fit installations designed around a 10-inch marine subwoofer opening. Its 4.78-inch mounting depth supports placement where rear clearance is limited.\u003c\/p\u003e\u003cp\u003eFor outdoor durability, the STX10MSW uses a PC-ABS basket with UV inhibitor and an ASA grille. These materials are specified for resistance to water exposure and sunlight in marine and powersports use. The product is listed as waterproof for its intended application.\u003c\/p\u003e\u003cp\u003eIntegrated 12V RGB LED lighting adds selectable visual accent lighting to a compatible installation. The STX10MSW can be used as the bass section of a marine audio upgrade alongside an appropriately matched amplifier and existing full-range speakers. It is a practical option for boats, UTVs, ATVs, and similar systems needing a dedicated 10-inch subwoofer.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Handling:\u003c\/strong\u003e Supports amplified bass systems with a stated 500-watt continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Marine Fitment:\u003c\/strong\u003e Uses a 10.00-inch cutout diameter for standard-size installation planning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30Hz-500Hz Response:\u003c\/strong\u003e Covers low bass and upper-bass frequencies in a subwoofer system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof Construction:\u003c\/strong\u003e Built for marine-compatible and outdoor audio applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Materials:\u003c\/strong\u003e PC-ABS basket and ASA grille support outdoor durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12V RGB Lighting:\u003c\/strong\u003e Adds integrated RGB illumination to compatible vehicle or boat setups.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe STX10MSW combines a PC-ABS basket with UV inhibitor and an ASA grille for a marine-oriented design. Its waterproof listing and outdoor-focused materials make it appropriate for installations exposed to sun and moisture. The 10.98-inch overall diameter and 6.46-inch total depth should be considered when checking panel and enclosure clearance.\u003c\/p\u003e\u003cp\u003ePlan for a 10.00-inch cutout and at least 4.78 inches of mounting clearance behind the mounting surface. Use an amplifier selected to suit the subwoofer's stated power handling, and plan separate 12V wiring and control as needed for the RGB lighting. Confirm available mounting space, amplifier compatibility, and lighting connections before installation.\u003c\/p\u003e","brand":"STX AUDIO","offers":[{"title":"Default Title","offer_id":45613589004479,"sku":"783501193944","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71Sk1zvkbEL.jpg?v=1777934217"},{"product_id":"stx-audio-stx1500us-1500w-10-inch-amplified-subwoofer-with-built-in-amplifier-adjustable-low-pass-filter-bass-boost-control-compact-car-audio-solution","title":"STX Audio STX1500US 10-Inch Amplified Subwoofer","description":"\u003cp\u003eThe STX Audio STX1500US is a compact amplified subwoofer designed to add low-frequency reinforcement without requiring a separate external amplifier or a large subwoofer enclosure. Its integrated 10-inch woofer and built-in amplifier make it a practical option for vehicles with limited available space. The slim 68 mm profile is intended for installations beneath a seat or in shallow cargo-area locations.\u003c\/p\u003e\u003cp\u003eThis model is suited to drivers who want more bass from a factory or aftermarket audio system while keeping the installation footprint compact. It provides both high-level and low-level input sensitivity options, allowing it to work with many OEM speaker-level outputs and aftermarket RCA-equipped receivers. That flexibility can simplify upgrades where changing the head unit is not desired.\u003c\/p\u003e\u003cp\u003eThe STX1500US is specified with a 55 Hz to 20 kHz frequency response, a signal-to-noise ratio above 90 dB, and total harmonic distortion below 0.4%. Its adjustable low-pass filter lets the installer select a crossover point from 50 Hz to 150 Hz. This helps blend the subwoofer with the vehicle's existing speakers rather than allowing bass output to overlap excessively with them.\u003c\/p\u003e\u003cp\u003eFor tuning flexibility, the built-in bass boost control adjusts from 0 to +24 dB. A 20 Hz subsonic filter is also specified to reduce amplification of extremely low frequencies. These controls allow the system to be tailored for the vehicle, source unit, and listener preference.\u003c\/p\u003e\u003cp\u003eThe STX1500US is an all-in-one bass upgrade for space-conscious car audio systems. Its listed 4-ohm woofer, integrated amplification, and selectable input connection methods support use in a range of basic audio-system upgrades. Proper level setting and crossover adjustment are important for balanced integration with full-range speakers.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Amplifier:\u003c\/strong\u003e Combines the subwoofer and amplifier in one compact enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Woofer:\u003c\/strong\u003e Provides dedicated low-frequency reinforcement in a slim-format design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Low-Pass Filter:\u003c\/strong\u003e Selectable 50 Hz to 150 Hz crossover tuning supports system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Bass Boost:\u003c\/strong\u003e Offers 0 to +24 dB adjustment for bass-output tailoring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Input Compatibility:\u003c\/strong\u003e Supports high-level and low-level source connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 Hz Subsonic Filter:\u003c\/strong\u003e Helps limit amplification of extremely low-frequency content.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe STX1500US uses a slim integrated enclosure measuring 345 x 262 x 68 mm. Its compact form factor combines the 10-inch woofer and built-in amplifier in a single assembly, reducing the need to find mounting space for separate components. Specific enclosure and cone materials were not confirmed in the available product information.\u003c\/p\u003e\u003cp\u003eChoose a secure, ventilated mounting location with adequate clearance for the enclosure and wiring, such as an appropriate under-seat or shallow cargo-area space. Connect it using the input type that matches the source unit: high-level input for speaker-level outputs or low-level input for compatible preamp outputs. Set the low-pass filter and bass boost conservatively at first, then fine-tune levels to complement the vehicle's main speakers.\u003c\/p\u003e","brand":"STX AUDIO","offers":[{"title":"Default Title","offer_id":45613589758143,"sku":"783501184829","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71ilF4l3iyL.jpg?v=1777934395"},{"product_id":"gravity-grwf10-10-inch-550w-car-audio-under-seat-powered-amplifier-subwoofer-with-high-power-long-throw-truck-bass-sub","title":"Gravity GRWF10 10\" Powered Under-Seat Subwoofer","description":"\u003cp\u003eThe Gravity GRWF10 is a compact 10-inch powered subwoofer designed to add low-frequency output to a vehicle audio system without requiring a separate amplifier enclosure in the trunk. Its low-profile under-seat format is intended for cars, trucks, and SUVs where available cargo space is limited. The integrated design combines the subwoofer enclosure and amplification in one wired unit.\u003c\/p\u003e\u003cp\u003eThis model is a practical upgrade for listeners who want more bass presence from a factory or aftermarket speaker system. It is intended to supplement full-range speakers rather than replace them. Its compact enclosure makes it especially suited to installations where a conventional subwoofer box would be impractical.\u003c\/p\u003e\u003cp\u003eThe GRWF10 uses a 10-inch driver in an active, enclosed powered-subwoofer configuration. Published product data identifies a 2-ohm subwoofer load, a 20 Hz to 150 Hz frequency-response range, and a signal-to-noise ratio above 90 dB. A built-in low-pass filter helps limit the unit to the bass range it is designed to reproduce.\u003c\/p\u003e\u003cp\u003eSystem-tuning controls include adjustable bass boost and phase-shift adjustment. The bass boost can increase low-frequency emphasis, while phase adjustment can help the subwoofer blend more smoothly with the vehicle's main speakers. A fixed 20 Hz subsonic filter is also listed in published technical data.\u003c\/p\u003e\u003cp\u003eThe GRWF10 supports wired signal connections and is listed with high-level input capability for integration with systems that use speaker-level outputs. Its automatic power on\/off function is intended for high-level connections, reducing the need for a separate turn-on arrangement in compatible installations. For a complete upgrade, it should be professionally wired to the vehicle's electrical system and secured in a location with adequate clearance and ventilation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Powered Design:\u003c\/strong\u003e Combines a 10-inch subwoofer and built-in amplifier in one enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnder-Seat Profile:\u003c\/strong\u003e Fits applications where trunk-mounted bass systems are not preferred.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Level Auto Turn-On:\u003c\/strong\u003e Supports automatic activation when using high-level signal connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Low-Pass Filter:\u003c\/strong\u003e Lets the bass frequency range be tailored to the system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Bass Boost:\u003c\/strong\u003e Provides adjustable low-frequency emphasis for personal tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase Shift Control:\u003c\/strong\u003e Helps align bass output with the rest of the vehicle audio system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GRWF10 is listed as an active enclosed subwoofer with an aluminum housing and a rectangular, low-profile form factor. Its compact 15 x 11.4 x 3-inch unit dimensions are designed for under-seat or other space-conscious vehicle mounting locations. A bi-color power-status LED provides a visible operating indication.\u003c\/p\u003e\u003cp\u003eBefore purchase, measure the intended mounting area for clearance around the 15 x 11.4 x 3-inch enclosure and allow room for wiring and ventilation. Installation requires a wired vehicle-audio connection and power wiring; high-level input capability can help it integrate with factory systems that do not provide dedicated RCA preamp outputs. Secure the enclosure firmly rather than leaving it loose beneath a seat, and set gain, low-pass filter, bass boost, and phase controls after installation.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":45628019900607,"sku":"701160345641","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71HaZ1-NX8L.jpg?v=1778618492"},{"product_id":"gravity-gr-10pw","title":"Gravity GR-10PW 10\" Dual 4-Ohm Car Audio Subwoofer","description":"\u003cp\u003eThe Gravity GR-10PW is a 10-inch car audio subwoofer intended to add dedicated low-frequency output to an aftermarket sound system. It is a passive speaker driver, so it requires a compatible external amplifier and a properly designed enclosure. This makes it suitable for vehicle owners building or refreshing a system that needs bass reinforcement beyond full-range speakers.\u003c\/p\u003e\u003cp\u003eThe GR-10PW is listed with 1000 watts maximum power handling and a dual 4-ohm voice-coil configuration. Dual voice coils provide installation flexibility because final system impedance depends on how the coils are wired. Amplifier selection should therefore be based on the completed wiring load rather than the model name alone.\u003c\/p\u003e\u003cp\u003eIts 10-inch format can suit systems where enclosure space is more limited than with larger subwoofers. A properly matched enclosure and amplifier help the driver operate as part of a balanced system. The final bass character will depend substantially on enclosure design, amplifier settings, vehicle acoustics, and source material.\u003c\/p\u003e\u003cp\u003eThis subwoofer is intended for custom car-audio installations rather than direct connection to a factory radio's speaker outputs. It can be paired with an aftermarket mono amplifier or another suitable amplified subwoofer channel that is stable at the final impedance. Professional installation is useful when planning power wiring, signal integration, enclosure construction, and tuning.\u003c\/p\u003e\u003cp\u003eThe available product listing confirms the core size, maximum-power, and dual-voice-coil details, but does not provide a full technical data sheet. Important setup details such as mounting dimensions, enclosure volume, sensitivity, and continuous RMS power should be verified before purchase or installation. This approach helps ensure the GR-10PW is matched appropriately to the rest of the audio system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Subwoofer:\u003c\/strong\u003e Provides a dedicated driver size for custom low-frequency car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1000W Maximum Rating:\u003c\/strong\u003e Indicates the listed maximum power-handling figure for the driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Voice Coils:\u003c\/strong\u003e Supports multiple wiring approaches when system impedance is planned correctly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Coil Rating:\u003c\/strong\u003e Gives installers a starting point for amplifier-load calculations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Driver Design:\u003c\/strong\u003e Works with an external amplifier rather than containing built-in amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom-System Fit:\u003c\/strong\u003e Can be integrated into an enclosure-based aftermarket bass upgrade.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GR-10PW uses a 10-inch subwoofer-driver format with dual voice coils. Detailed information about its cone material, surround material, basket construction, magnet assembly, cooling design, and voice-coil dimensions is not confirmed in the available product listing. Verify those construction details with the seller before making enclosure or power-system decisions based on them.\u003c\/p\u003e\u003cp\u003eInstall the GR-10PW in an enclosure designed for the driver after confirming its required cutout, mounting depth, and enclosure recommendations. Wire both voice coils according to the target final impedance and use an amplifier rated to operate safely at that load. Because the listing does not confirm continuous RMS power or recommended enclosure specifications, confirm those details before selecting amplifier output or building a box.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":45646975369407,"sku":"567891234506","price":52.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/a_e53bf157-48c0-41d9-b586-a9fd770fdb9e.jpg?v=1779138704"},{"product_id":"kenwood-kfc-w2541","title":"Kenwood KFC-W2541 10\" 4-Ohm Component Subwoofer","description":"\u003cp\u003eThe Kenwood KFC-W2541 is a 10-inch, 4-ohm component subwoofer designed to add low-frequency output to a vehicle audio system. It is intended for listeners who want deeper bass than factory full-range speakers can produce. As a passive subwoofer, it is installed in a suitable enclosure and powered by a compatible external amplifier.\u003c\/p\u003e\u003cp\u003eWith 300 watts RMS power handling and a 33 to 300 Hz frequency response, the KFC-W2541 is built for dedicated bass reproduction. Its 84 dB sensitivity specification provides useful context when matching it with an amplifier and enclosure. The single 4-ohm configuration keeps system planning straightforward for a compatible mono or subwoofer amplifier channel.\u003c\/p\u003e\u003cp\u003eKenwood uses an injection polypropylene X-motif cone with a Diamond Array Pattern to help control resonance. The speaker also incorporates a stress-controlled spider, which is computer optimized to manage mechanical stress during operation. These design elements support consistent movement of the woofer assembly when reproducing bass material.\u003c\/p\u003e\u003cp\u003eThermal management is addressed through an aluminum bobbin, closed-yoke design, and advanced airflow control. The closed-yoke structure is paired with a ferrite magnet and steel basket. Together, these components form a durable platform for a custom subwoofer enclosure installation.\u003c\/p\u003e\u003cp\u003eThe KFC-W2541 can be used in either a sealed or ported enclosure based on the desired system approach. Kenwood specifies a 0.65-cubic-foot sealed enclosure or a 0.9-cubic-foot ported enclosure. It is also identified by Kenwood as a power match for the KAC-D5101 amplifier, making it a practical option for a matched Kenwood bass upgrade.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Subwoofer:\u003c\/strong\u003e Adds dedicated bass capability to a custom vehicle audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Handling:\u003c\/strong\u003e Supports amplifier matching for sustained bass playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Simplifies pairing with compatible mono amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eX-Motif Cone:\u003c\/strong\u003e Helps control resonance for solid bass response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermal Management:\u003c\/strong\u003e Aluminum bobbin and airflow design manage heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Enclosure Options:\u003c\/strong\u003e Supports Kenwood-specified sealed or ported box designs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-W2541 uses a steel basket, ferrite magnet, urethane surround, ABS gasket, paper diaphragm, and injection polypropylene cap. Its special features include the injection PP X-motif cone with Diamond Array Pattern, closed yoke with advanced airflow control, aluminum bobbin, and stress-controlled spider. The speaker measures 10-13\/16 inches wide and high, with an overall depth of 5-5\/8 inches.\u003c\/p\u003e\u003cp\u003ePlan the enclosure and vehicle location before installation. The subwoofer requires a 9-1\/16-inch cutout diameter and 4-7\/8 inches of mounting depth, while Kenwood specifies 0.65 cubic feet for a sealed enclosure or 0.9 cubic feet for a ported enclosure. Use a compatible external amplifier and wiring installation appropriate for a 4-ohm passive subwoofer; the optional CA-101G grille is available separately.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":45766406897855,"sku":"KFC-W2541","price":67.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81sqoHKgv6L.jpg?v=1782245960"},{"product_id":"kenwood-kfc-wps1000f","title":"Kenwood KFC-WPS1000F 10\" Shallow-Mount Component Subwoofer","description":"\u003cp\u003eThe Kenwood KFC-WPS1000F is a 10-inch shallow-mount component subwoofer designed to add dedicated low-frequency output where conventional full-depth subwoofers may not fit. Its compact mounting profile helps solve installation challenges in vehicles with limited enclosure depth. It is intended for use with a compatible external amplifier and properly designed subwoofer enclosure.\u003c\/p\u003e\u003cp\u003eThis model is a practical choice for listeners building a compact bass upgrade around a 4-ohm subwoofer load. With 250 watts RMS rated input power and 1,000 watts peak input power, it is suited to systems that prioritize correct power matching over headline wattage alone. Its 35 Hz to 800 Hz frequency response supports bass and upper-bass duties when integrated with a suitable crossover setup.\u003c\/p\u003e\u003cp\u003eThe KFC-WPS1000F uses a carbon-glass fiber honeycomb cone to provide a rigid diaphragm structure for low-frequency reproduction. A smooth linear surround and Super Linear Spider support controlled cone movement. Kenwood rates sensitivity at 90 dB\/W at 1 meter and specifies a 39 Hz free-air resonance.\u003c\/p\u003e\u003cp\u003eIts shallow-mount architecture is supported by an 85 mm mounting depth, making it useful for tight custom enclosures and installations with restricted behind-panel clearance. The driver has a 232 mm mounting-hole diameter and a 275 mm overall diameter. These measurements should be checked carefully against the available mounting surface and enclosure design before installation.\u003c\/p\u003e\u003cp\u003eKenwood incorporates a heat-transfer structure, ventilated die-cast aluminum basket, and push terminals into the KFC-WPS1000F design. The driver can be used in a manufacturer-recommended 0.6 cubic foot sealed enclosure. It can serve as a single-subwoofer upgrade or as part of a multi-subwoofer system when total impedance and amplifier capability are properly considered.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Shallow-Mount Driver:\u003c\/strong\u003e Provides bass capability while requiring only 85 mm of mounting depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching based on continuous rated input power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Nominal Impedance:\u003c\/strong\u003e Works with amplifiers designed to drive a 4-ohm subwoofer load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon-Glass Fiber Honeycomb Cone:\u003c\/strong\u003e Uses a rigid cone structure for controlled low-frequency operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat-Transfer Structure:\u003c\/strong\u003e Helps move heat away from the motor system during operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush-Terminal Connections:\u003c\/strong\u003e Provides straightforward speaker-wire connection at the subwoofer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-WPS1000F combines a carbon-glass fiber honeycomb cone with a smooth linear surround and Super Linear Spider. Its die-cast aluminum basket uses multiple ventilation openings and is paired with a heat-transfer motor structure. A removable rubber gasket is also specified by Kenwood.\u003c\/p\u003e\u003cp\u003ePlan the installation around the 232 mm mounting cutout, 85 mm mounting depth, and 4-ohm nominal impedance. Kenwood specifies a 0.6 cubic foot, or 17.0 liter, sealed enclosure recommendation for this model. Use an external amplifier whose output and impedance capability are appropriate for the subwoofer, and confirm clearance, enclosure volume, and wiring configuration before final assembly.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":45766407159999,"sku":"KFC-WPS1000F","price":103.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61WbQMDdf3L.jpg?v=1782245963"},{"product_id":"kenwood-kfc-w2542","title":"Kenwood KFC-W2542 10\" Subwoofer","description":"\u003cp\u003eThe Kenwood KFC-W2542 is a 10-inch passive car subwoofer designed to add dedicated low-frequency output to an aftermarket audio system. It is a practical choice for listeners who want more bass impact than full-range door speakers can provide. With a 4-ohm nominal impedance and 300-watt RMS power rating, it is intended for use with a compatible external amplifier.\u003c\/p\u003e\u003cp\u003eThis subwoofer is suited to single-subwoofer systems, compact custom installations, and upgrades where a 10-inch driver is the preferred fit. Its specified 44-300 Hz frequency response focuses its role on bass reproduction rather than full-range playback. The 82 dB sensitivity specification and 300-watt RMS rating give installers clear targets when selecting amplification.\u003c\/p\u003e\u003cp\u003eKenwood uses a polypropylene cone with a foam surround to support controlled cone movement. A steel basket provides the mounting structure, while the ferrite magnet assembly weighs 61.4 ounces. Together, these elements create a durable driver platform for a properly designed subwoofer enclosure.\u003c\/p\u003e\u003cp\u003eThe KFC-W2542 uses a 6-layer copper voice coil on an aluminum former. Kenwood's heat-dissipation design uses air convection created by diaphragm movement to help cool the voice coil during operation. This construction is intended to support heat resistance and sustained power handling.\u003c\/p\u003e\u003cp\u003eFor system planning, the KFC-W2542 requires an enclosure, an external amplifier, wiring, and an audio signal source or receiver with appropriate subwoofer connectivity. Its 9-1\/16-inch cutout requirement and 5-1\/4-inch mounting depth should be checked before building or selecting an enclosure. It can be used in recommended sealed or ported enclosure designs, depending on available space and the desired system approach.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Power Handling:\u003c\/strong\u003e Matches with an amplifier rated appropriately for continuous 4-ohm operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1300W Peak Power:\u003c\/strong\u003e Provides a published maximum short-term power-handling rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 4-Ohm Configuration:\u003c\/strong\u003e Offers straightforward amplifier matching for a single-subwoofer system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6-Layer Copper Voice Coil:\u003c\/strong\u003e Uses a multi-layer coil construction for heat resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Voice-Coil Former:\u003c\/strong\u003e Supports the voice coil within the motor assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePP Cone and Foam Surround:\u003c\/strong\u003e Combines a polypropylene diaphragm with a compliant foam surround.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-W2542 combines a polypropylene cone, foam surround, steel basket, and ferrite magnet structure. Its 61.4-ounce magnet and 6-layer copper voice coil with aluminum former are paired with a convection-based cooling approach. The driver has an overall width and height of 10-13\/16 inches and a net weight of 10.14 pounds.\u003c\/p\u003e\u003cp\u003ePlan for a 9-1\/16-inch mounting cutout and at least 5-1\/4 inches of mounting depth. Use an enclosure designed for a 10-inch subwoofer and pair the driver with a suitable external amplifier at its 4-ohm impedance. Confirm enclosure clearance, amplifier load capability, wiring, and crossover settings before installation.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":45766410076351,"sku":"KFC-W2542","price":67.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61BnImVbBzL.jpg?v=1782246010"},{"product_id":"rockford-fosgate-r2-2x10","title":"Rockford Fosgate R2-2X10 Dual 10\" Sealed Subwoofer Enclosure","description":"\u003cp\u003eThe Rockford Fosgate R2-2X10 is a dual 10-inch loaded subwoofer enclosure for adding dedicated low-frequency output to a car audio system. It combines two Prime R2 dual-voice-coil subwoofers in a factory-built sealed enclosure, eliminating the need to select separate drivers and build a box. This makes it a practical option for listeners who want a ready-to-wire bass upgrade.\u003c\/p\u003e\u003cp\u003eThe enclosure is internally wired as a 2-ohm mono load and is rated for 500 watts RMS total power handling. Its sealed alignment is suited to systems seeking a compact, controlled bass foundation rather than the added enclosure complexity of a custom ported design. An external amplifier is required to operate the enclosure.\u003c\/p\u003e\u003cp\u003eEach enclosure uses an R2D2-10 replacement woofer with a dual voice coil design, polypropylene cone, foam surround, and integrated trim ring. The two-driver layout increases cone area over a single 10-inch subwoofer while keeping the enclosure in a trunk-friendly rectangular format. High-current binding posts provide a straightforward connection point for speaker wire from the amplifier.\u003c\/p\u003e\u003cp\u003eRockford Fosgate builds the cabinet from 5\/8-inch MDF and covers it in high-density carpet for a finished appearance and everyday vehicle use. The enclosure measures 12.2 inches high, 30.12 inches wide, and 12.11 inches deep. Its black carpeted finish helps it integrate cleanly with many trunk and cargo-area installations.\u003c\/p\u003e\u003cp\u003eThe R2-2X10 fits well into a system built around a compatible 2-ohm-stable mono amplifier and an existing factory or aftermarket source unit. Because the woofers and enclosure are already matched and wired, installation can be simpler than assembling individual subwoofers, a separate box, and internal wiring. Use appropriate amplifier setup, secure mounting, and safe wire routing to complete the upgrade.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 10-Inch Design:\u003c\/strong\u003e Two pre-installed R2D2-10 subwoofers provide increased cone area in one enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500-Watt RMS Handling:\u003c\/strong\u003e Supports 500 watts RMS total system power handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Mono Load:\u003c\/strong\u003e Internal wiring presents a 2-ohm load to a compatible amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Enclosure:\u003c\/strong\u003e Factory-built sealed cabinet simplifies subwoofer system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\/8-Inch MDF Cabinet:\u003c\/strong\u003e MDF construction provides a rigid foundation for the loaded drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Current Binding Posts:\u003c\/strong\u003e Rear terminals accept 16 AWG to 12 AWG speaker wire.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe R2-2X10 uses a precision-built sealed enclosure constructed from 5\/8-inch MDF and finished in high-density black carpet. It is loaded with two R2D2-10 dual-voice-coil subwoofers featuring polypropylene cones, foam surrounds, stamped baskets, integrated trim rings, and dual 12 AWG compression terminals. The cabinet uses high-current binding posts for its external amplifier connection.\u003c\/p\u003e\u003cp\u003eConnect the amplifier's positive speaker output to the enclosure's red terminal and the negative output to the black terminal. Use 16 AWG to 12 AWG speaker wire, strip approximately 5\/8 inch of insulation, and route speaker wire away from high-current vehicle wiring where possible. Disconnect the vehicle battery's negative terminal before installation, securely mount the enclosure, and pair it with a 2-ohm-stable mono amplifier matched appropriately to its 500-watt RMS total rating.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45767997784255,"sku":"R2-2X10","price":176.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71AaXvttnrL_d341d9a4-204e-48c9-9742-3c818ea4e575.jpg?v=1782270233"},{"product_id":"rockford-fosgate-p1-1x10","title":"Rockford Fosgate P1-1X10 10\" Ported Loaded Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate P1-1X10 is a single 10-inch loaded subwoofer enclosure for adding dedicated low-frequency output to a car audio system. It combines a Punch P1S4-10 subwoofer with a prebuilt vented enclosure, eliminating the need to select and build a separate box. The enclosure presents a 4-ohm load to a compatible amplifier.\u003c\/p\u003e\u003cp\u003eThis model is suited to listeners who want a ready-to-install bass upgrade in a compact hatchback-style enclosure. Its 250-watt RMS power rating allows it to pair with an amplifier that is stable at 4 ohms and appropriately power-matched. The ported design is intended to provide strong low-frequency output while retaining the convenience of a preloaded enclosure.\u003c\/p\u003e\u003cp\u003eThe P1-1X10 uses a single-voice-coil Punch P1 10-inch woofer with a Kevlar fiber reinforced paper cone. The driver has a 4-ohm nominal impedance and is installed and wired inside the enclosure. With one external terminal connection, system wiring is straightforward once an amplifier and appropriate installation hardware are selected.\u003c\/p\u003e\u003cp\u003eIts enclosure uses 5\/8-inch medium-density fiberboard and a high-density carpet covering for automotive use. A proprietary high-flow, low-noise port is incorporated into the vented cabinet design. High-current binding posts and quick-release compression terminals provide the connection point for speaker wire.\u003c\/p\u003e\u003cp\u003eThe P1-1X10 is a practical fit for an aftermarket system using a separate mono or bridged amplifier channel rated for a 4-ohm speaker load. It is supplied as a passive enclosure, so an amplifier, power wiring, signal connection, and installation hardware are required separately. The angled enclosure profile measures 13.125 inches high by 17 inches wide by 15.125 inches deep.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 10-Inch P1 Woofer:\u003c\/strong\u003e Includes one factory-installed P1S4-10 subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Final Load:\u003c\/strong\u003e Simplifies matching with a compatible 4-ohm amplifier channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 Watts RMS:\u003c\/strong\u003e Supports continuous power handling up to its rated level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorted Enclosure:\u003c\/strong\u003e Uses a vented cabinet for low-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\/8-Inch MDF Cabinet:\u003c\/strong\u003e Provides a rigid enclosure structure for the installed woofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompression Terminals:\u003c\/strong\u003e Accept speaker wire up to 10 AWG.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe enclosure is constructed from 5\/8-inch MDF and covered in high-density automotive carpet. Its hatchback-style cabinet includes a high-flow, low-noise port and high-current binding posts. The loaded driver is the Punch P1S4-10 single 4-ohm voice-coil subwoofer.\u003c\/p\u003e\u003cp\u003eConnect the amplifier's positive speaker output to the enclosure's red terminal and the negative output to the black terminal. Use an amplifier that is compatible with a 4-ohm load and power-match it to the enclosure's 250-watt RMS rating. Secure the enclosure in the vehicle, keep the port unobstructed, and route speaker wire away from high-current vehicle wiring where practical.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45767998636223,"sku":"P1-1X10","price":171.72,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71Eh5dMDdRL.jpg?v=1782270261"},{"product_id":"rockford-fosgate-p1-2x10","title":"Rockford Fosgate P1-2X10 Dual 10\" Ported Subwoofer Enclosure","description":"\u003cp\u003eThe Rockford Fosgate P1-2X10 is a loaded, ported enclosure designed to add dedicated low-frequency output to a car audio system without requiring a custom subwoofer box. It combines two 10-inch Punch P1 subwoofers in a preassembled vented cabinet. This is a practical option for listeners who want a straightforward bass upgrade with a single enclosure connection point.\u003c\/p\u003e\u003cp\u003eThe enclosure is internally wired for a 2-ohm nominal load and handles 500 watts RMS total. Its two P1S4-10 single-voice-coil woofers share the system power rating at 250 watts RMS each. Match it with a mono amplifier that is stable at 2 ohms and appropriately rated for the enclosure's recommended 250-500 watts RMS range.\u003c\/p\u003e\u003cp\u003eA ported enclosure is intended to support strong bass output and low-frequency extension while using a ready-made cabinet. The P1-2X10 uses a front-firing tuned port with a high-flow, low-noise design. This makes it well suited to vehicles where a conventional rectangular enclosure can be secured in the cargo area.\u003c\/p\u003e\u003cp\u003eEach P1 subwoofer uses a Kevlar-reinforced paper-pulp cone, high-density NBR surround, 2-inch voice coil, and vented motor structure. These construction details support controlled cone movement and thermal management during sustained listening. The enclosure's internally wired configuration eliminates the need to wire the two woofers together externally.\u003c\/p\u003e\u003cp\u003eThe cabinet is built from 5\/8-inch MDF and finished in high-density black carpet for a durable, integrated appearance. High-current binding posts provide the amplifier connection, with red for positive and black for negative. The P1-2X10 is a complete loaded-subwoofer solution, but it still requires a compatible external amplifier, amplifier wiring, and installation hardware.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 10-Inch P1 Woofers:\u003c\/strong\u003e Two factory-installed Punch P1 subwoofers provide a complete bass enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Final Load:\u003c\/strong\u003e Internal wiring simplifies connection to a compatible 2-ohm mono amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500-Watt RMS Handling:\u003c\/strong\u003e Supports sustained system power up to 500 watts RMS total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorted Enclosure:\u003c\/strong\u003e Front-firing tuned port supports efficient low-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\/8-Inch MDF Cabinet:\u003c\/strong\u003e Solid MDF construction provides a stable enclosure structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Current Binding Posts:\u003c\/strong\u003e Convenient speaker-wire terminals connect the enclosure to an amplifier.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P1-2X10 uses a rectangular, hatchback-style ported cabinet constructed from 5\/8-inch MDF and covered in high-density black carpet. Its front-firing port is designed for high airflow with reduced port noise, while the two Punch P1 woofers use Kevlar-reinforced paper-pulp cones, high-density NBR surrounds, and vented motor assemblies. A single terminal cup with high-current binding posts provides the external connection.\u003c\/p\u003e\u003cp\u003eInstall the enclosure in a secure location with adequate clearance for its 13.125-inch height, 31.125-inch width, and 15.125-inch depth. Connect the amplifier's positive speaker output to the enclosure's red terminal and negative output to the black terminal, using 16- to 12-AWG speaker wire with approximately 5\/8 inch of insulation removed. Disconnect the vehicle battery negative terminal before installation, and use an external amplifier rated for a 2-ohm load.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45767998734527,"sku":"P1-2X10","price":304.56,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61tX6hF8xWL.jpg?v=1782270263"},{"product_id":"rockford-fosgate-p1-s2-10","title":"Rockford Fosgate P1S2-10 10\" 2-Ohm Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate P1S2-10 is a 10-inch, single-voice-coil car subwoofer designed to add dedicated low-frequency output to an aftermarket audio system. Its 2-ohm nominal impedance and 250-watt RMS power rating make it suited to a properly matched mono amplifier. It is intended for listeners who want fuller bass than factory door speakers can reproduce.\u003c\/p\u003e\u003cp\u003eThis Punch P1 model uses a Kevlar-reinforced paper cone and dust cap to provide a rigid radiating surface for bass playback. A high-density NBR half-roll surround supports cone movement, while a poly-cotton spider is designed for resistance to tearing and fatigue. The result is a subwoofer built for controlled low-frequency reinforcement in a compact 10-inch format.\u003c\/p\u003e\u003cp\u003eThe P1S2-10 has a 2.0-inch, four-layer voice coil with a high-temperature design and a spun-laced Nomex reinforcement collar. Its vented spider cavity helps promote voice-coil cooling during operation. The motor system incorporates an extended pole piece and bumped backplate to support the woofer's excursion capability.\u003c\/p\u003e\u003cp\u003eThis subwoofer can be used in either a sealed or vented enclosure, allowing the system design to be tailored to available space and bass preference. Rockford Fosgate specifies a 0.59 cubic-foot sealed enclosure as its recommended sealed alignment. For a vented build, the published alignment is 1.40 cubic feet tuned to 37.3 Hz.\u003c\/p\u003e\u003cp\u003eWith a 5.33-inch mounting depth and 9.125-inch mounting cutout diameter, the P1S2-10 should be measured against the available enclosure and vehicle clearance before installation. Its single 2-ohm voice coil presents a 2-ohm load when used by itself. Pair it with an amplifier that is stable at 2 ohms and appropriately rated for its 250-watt RMS handling.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e250-Watt RMS Handling:\u003c\/strong\u003e Supports amplifier matching based on continuous power rather than peak-only ratings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm SVC Design:\u003c\/strong\u003e Provides a single 2-ohm nominal load for compatible amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKevlar-Reinforced Paper Cone:\u003c\/strong\u003e Combines paper-cone character with added structural reinforcement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Spider Cavity:\u003c\/strong\u003e Helps promote cooling around the voice-coil assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-AWG Push Terminals:\u003c\/strong\u003e Uses insulated, nickel-plated terminals for secure speaker-wire connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Or Vented Compatibility:\u003c\/strong\u003e Supports enclosure options for different installation goals and space constraints.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P1S2-10 is constructed around a sturdy 16-gauge compound-bend frame with optimized motor magnetics, an extended pole piece, and bumped backplate. It uses a protective PVC-textured magnet cover, decorative ABS trim ring, high-density NBR half-roll surround, and a tear- and fatigue-resistant poly-cotton spider. These components support the woofer's mechanical structure and everyday car-audio use.\u003c\/p\u003e\u003cp\u003eAllow at least 5.33 inches of mounting depth behind the baffle and cut a 9.125-inch mounting opening. Rockford Fosgate recommends a 0.50 to 0.85 cubic-foot sealed enclosure range, with 0.59 cubic feet specified as the reference sealed volume; its vented recommendation is 1.40 cubic feet tuned to 37.3 Hz using one 3-inch by 8-inch port. For system setup, the manual recommends an active 80-100 Hz low-pass crossover at 12 dB per octave for subwoofer operation.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45767998963903,"sku":"P1-S2-10","price":74.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61rwkgUc0OL.jpg?v=1782270272"},{"product_id":"rockford-fosgate-p2-d2-10","title":"Rockford Fosgate P2D2-10 10\" Dual 2-Ohm Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate P2D2-10 is a 10-inch dual voice coil car subwoofer designed to add dedicated low-frequency output to an aftermarket audio system. Its dual 2-ohm voice coils give installers flexibility when planning the final amplifier load. It is intended for use with an external subwoofer amplifier and a properly built enclosure.\u003c\/p\u003e\u003cp\u003eThis model suits listeners who want a compact 10-inch woofer for a trunk, hatchback, SUV, or custom vehicle enclosure. With a 300-watt RMS power rating, it is sized for moderate-power bass systems rather than a high-power competition build. The P2D2-10 can be used in either sealed or vented box designs depending on available space and system goals.\u003c\/p\u003e\u003cp\u003eThe Kevlar fiber reinforced paper cone is paired with a rubber surround and a dual linear spider assembly. This combination is designed to support controlled cone movement while handling sustained bass playback. Its 84 dB sensitivity rating and 29-250 Hz frequency-response specification place it squarely in the sub-bass and bass range.\u003c\/p\u003e\u003cp\u003eRockford Fosgate equips the P2D2-10 with a high-temperature, four-layer voice coil, a spun-laced Nomex reinforcement collar, and integrated spider venting in the StampCast basket. The extended pole piece and bumped vented backplate provide clearance and ventilation around the motor structure. Dual 10-AWG nickel-plated compression terminals provide substantial speaker-wire connection points.\u003c\/p\u003e\u003cp\u003eFor a balanced upgrade path, pair this subwoofer with an amplifier selected for its final wired impedance and approximately its 300-watt RMS rating. A sealed enclosure uses less volume and follows the published 0.50-0.85 cubic-foot range, while the recommended vented design uses 1.40 cubic feet gross internal volume. The included decorative trim ring provides a finished appearance, and an optional grille insert can be added for cone protection.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300-Watt RMS Rating:\u003c\/strong\u003e Supports amplifier matching around 300 watts of continuous power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Provides wiring flexibility when configuring an amplifier load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKevlar-Reinforced Paper Cone:\u003c\/strong\u003e Combines a paper-cone character with added fiber reinforcement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStampCast Vented Basket:\u003c\/strong\u003e Integrates spider venting to help manage voice-coil heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVAST Cone Design:\u003c\/strong\u003e Increases effective cone area compared with conventional mounting designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-AWG Compression Terminals:\u003c\/strong\u003e Accommodates larger speaker wire for secure connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P2D2-10 uses a Kevlar fiber reinforced paper cone, protective textured PVC magnet cover, dual linear spiders, and embedded 16-AWG tinsel leads. Its high-temperature voice coil uses a spun-laced Nomex reinforcement collar, while the extended pole piece and bumped vented backplate support the motor assembly. A diamond-cut cast aluminum trim ring is included, with an optional grille insert available separately.\u003c\/p\u003e\u003cp\u003eConfirm a 9.13-inch cutout and at least 5.92 inches of mounting depth before installation. Use a sealed enclosure between 0.50 and 0.85 cubic feet, or follow the published 1.40-cubic-foot vented enclosure design with a 4-inch by 14-inch port. Match the amplifier to the final impedance created by the dual 2-ohm coils, and set gain carefully to avoid overpowering the 300-watt RMS-rated woofer.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45767999488191,"sku":"P2-D2-10","price":87.21,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61l2a1xUQmL.jpg?v=1782270291"},{"product_id":"rockford-fosgate-p2-d4-10","title":"Rockford Fosgate P2D4-10 10\" Dual 4-Ohm Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate P2D4-10 is a 10-inch Punch P2 car subwoofer designed to add controlled low-frequency output to an aftermarket audio system. Its dual 4-ohm voice-coil configuration gives installers wiring flexibility when matching a compatible amplifier. With a 300-watt RMS power rating, it is sized for systems that need meaningful bass without moving to a larger subwoofer.\u003c\/p\u003e\u003cp\u003eThis model is intended for listeners building a sealed or vented enclosure system in a car, truck, or SUV. A sealed enclosure supports a compact installation and a more controlled response, while the recommended vented enclosure is tuned for lower bass extension. The woofer's 27.2-250 Hz frequency-response rating helps it cover the bass range below full-range speakers.\u003c\/p\u003e\u003cp\u003eA Kevlar-reinforced paper-pulp cone provides the moving surface for bass reproduction, while the tall-profile VAST Santoprene surround supports cone travel. The dual poly-cotton spider assembly uses embedded tinsel leads to help manage repeated movement. Its 2.25-inch, four-layer voice coils are built for the thermal demands associated with its rated power handling.\u003c\/p\u003e\u003cp\u003eRockford Fosgate uses an extended pole piece, bumped vented backplate, and integrated spider venting to support motor cooling and excursion control. The driver also uses a StampCast basket, a protective PVC motor cover, and a cast-aluminum trim ring. These construction details are intended to support stable installation and regular automotive use.\u003c\/p\u003e\u003cp\u003eThe P2D4-10 works as the bass section of a system with an external subwoofer amplifier and appropriate enclosure. Its dual 4-ohm coils may be wired to suit an amplifier's supported load, so the final wiring plan should be confirmed before installation. Rockford Fosgate recommends using an active low-pass crossover set from 80 to 100 Hz at 12 dB per octave for subwoofer operation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300-Watt RMS Rating:\u003c\/strong\u003e Supports amplifier matching based on continuous power handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Provides series or parallel wiring flexibility for compatible amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKevlar-Reinforced Paper Cone:\u003c\/strong\u003e Combines paper-cone character with reinforced construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVAST Santoprene Surround:\u003c\/strong\u003e Supports cone movement with a tall-profile surround design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpider Venting System:\u003c\/strong\u003e Helps manage airflow around the voice-coil area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexFit Mounting Pattern:\u003c\/strong\u003e Allows some adjustment during mounting-hole alignment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P2D4-10 uses a 16-gauge compound-bend StampCast frame, a dual tear- and fatigue-resistant poly-cotton spider, and flexible stitched-on lead wires. Its high-temperature 2.25-inch voice coils use a spun-laced Nomex insulating reinforcement collar. A removable PVC motor cover and die-cast aluminum trim ring complete the exterior design.\u003c\/p\u003e\u003cp\u003eAllow for a 9.13-inch cutout diameter and 5.92 inches of mounting depth when planning the enclosure. Rockford Fosgate specifies a 0.59-cubic-foot sealed enclosure or a 1.40-cubic-foot vented enclosure, with the vented design using a 4-inch-diameter, 16.3-inch-long port. Use the dual 10-AWG compression terminals and wire the voice coils only for an impedance load the amplifier is rated to drive.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45767999586495,"sku":"P2-D4-10","price":104.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61l2a1xUQmL_36665ff5-8739-446c-af1e-962ae2490863.jpg?v=1782270295"},{"product_id":"rockford-fosgate-p3-d4-10","title":"Rockford Fosgate P3D4-10 10\" Dual 4-Ohm Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate P3D4-10 is a 10-inch dual voice coil subwoofer designed to add controlled low-frequency output to a vehicle audio system. Its dual 4-ohm voice coils provide wiring flexibility for matching a compatible mono or multi-channel amplifier. It is suited to listeners building a dedicated bass system or upgrading a factory system with an enclosure and external amplification.\u003c\/p\u003e\u003cp\u003eWith a 500-watt RMS power rating, the P3D4-10 is intended for systems that need substantial bass capability without moving to a larger subwoofer size. The 10-inch format can be a practical fit where cargo space is limited but a purpose-built enclosure is still possible. Its published frequency response extends from 28 Hz to 250 Hz.\u003c\/p\u003e\u003cp\u003eAn anodized aluminum cone and aluminum dustcap provide a rigid moving surface intended to maintain its shape under demanding operation. The Santoprene surround supports cone movement, while the dual-spider design and venting help manage heat around the motor assembly. The 2.5-inch, four-layer voice coil is built around an aluminum former.\u003c\/p\u003e\u003cp\u003eThe P3D4-10 can be used in either sealed or vented enclosures, allowing the enclosure choice to shape the system's bass character and packaging needs. Rockford Fosgate specifies a 0.59 cubic-foot sealed enclosure for its optimum sealed recommendation. Its optimum vented recommendation is 1.40 cubic feet tuned to 40 Hz.\u003c\/p\u003e\u003cp\u003eFor amplifier matching, this subwoofer uses two 4-ohm voice coils that may be wired for either a 2-ohm or 8-ohm final load when using one subwoofer. Select an amplifier whose stable impedance and RMS output are appropriate for the chosen wiring configuration. A low-pass crossover in the 80-100 Hz range is recommended in the owner's manual for subwoofer use.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Supports 2-ohm or 8-ohm single-subwoofer wiring configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500-Watt RMS Rating:\u003c\/strong\u003e Provides a realistic continuous-power target for amplifier selection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnodized Aluminum Cone:\u003c\/strong\u003e Uses a rigid cone material for controlled bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid StampCast Basket:\u003c\/strong\u003e Combines strength with reduced weight and resonance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVAST Surround Design:\u003c\/strong\u003e Increases effective cone area for greater air movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-AWG Push Terminals:\u003c\/strong\u003e Accommodate substantial speaker wire for secure connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P3D4-10 uses a hybrid StampCast basket, anodized aluminum cone and dustcap, Santoprene surround, dual spiders, and an aluminum voice-coil former. Its motor structure incorporates spider venting to help cool the assembly during operation. The supplied painted aluminum trim ring provides a finished appearance around the mounting area.\u003c\/p\u003e\u003cp\u003eAllow for a 9.125-inch mounting cutout and 6.18 inches of mounting depth before selecting an enclosure. The optimum sealed enclosure is 0.59 cubic feet gross internal volume, while the optimum vented enclosure is 1.40 cubic feet gross internal volume with one 4-inch by 14-inch port. For vented systems, the owner's manual recommends a subsonic or infrasonic filter; use a rigid, airtight enclosure and account for driver and port displacement in final box design.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45767999652031,"sku":"P3-D4-10","price":158.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61rGhW3iTAL.jpg?v=1782270298"},{"product_id":"rockford-fosgate-p300-10t","title":"Rockford Fosgate P300-10T 10\" Powered Truck Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate Punch P300-10T is a self-contained powered subwoofer enclosure designed to add low-frequency output without separately matching an amplifier, woofer, and box. It combines a 10-inch subwoofer, a 300-watt RMS Class-D amplifier, and a sealed truck-style enclosure in one package. It is intended for vehicle systems that need added bass while keeping installation space manageable.\u003c\/p\u003e\u003cp\u003eThis enclosure is suited to trucks and other vehicles where available cargo space is limited. Its wedge-shaped cabinet uses a shallow 4.8-inch top depth and a 7.9-inch bottom depth to help it fit in tighter locations. The sealed design emphasizes controlled bass integration for daily listening systems.\u003c\/p\u003e\u003cp\u003eThe P300-10T is built to work with either factory-installed or aftermarket audio systems. High-level speaker inputs support connection to many factory radios, while low-level RCA inputs support aftermarket source units. An input-level selector helps match the selected connection method.\u003c\/p\u003e\u003cp\u003eIts integrated amplifier includes a variable low-pass crossover, adjustable Punch Bass EQ, and a 0°\/180° phase switch. These controls help blend the enclosure with the vehicle's full-range speakers and accommodate different mounting locations. A wired Remote Punch Level Control lets the listener adjust subwoofer output from the front of the vehicle.\u003c\/p\u003e\u003cp\u003eThe enclosure also offers selectable automatic turn-on methods for practical integration. It can use a conventional remote trigger, DC-offset sensing, or audio sensing depending on the vehicle and source unit. A quick-disconnect power connector and removable signal harness simplify removal when cargo space is needed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-In-One Powered Design:\u003c\/strong\u003e Combines the 10-inch woofer, amplifier, and sealed enclosure in one matched assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300-Watt RMS Class-D Amplifier:\u003c\/strong\u003e Provides dedicated amplification without requiring a separate external subwoofer amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory-Radio Compatibility:\u003c\/strong\u003e High-level speaker inputs support integration with many factory audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Low-Pass Crossover:\u003c\/strong\u003e Adjusts from 50 Hz to 200 Hz to better blend bass with existing speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePunch Bass And Phase Controls:\u003c\/strong\u003e Provides adjustable bass boost and selectable 0° or 180° phase alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Remote Level Control:\u003c\/strong\u003e Lets the driver adjust subwoofer output from the dash or center console.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P300-10T uses a sealed, truck-style wedge enclosure constructed from 5\/8-inch MDF and covered in heat-activated vinyl. Its cabinet measures 13.3 inches high by 21.7 inches wide, with 4.8-inch and 7.9-inch wedge depths. A metal-mesh grille helps protect the subwoofer, while the enclosure's compact shape is intended for space-conscious vehicle installations.\u003c\/p\u003e\u003cp\u003eInstallation requires properly fused battery power, a short chassis ground, and either RCA or speaker-level signal wiring. The supplied harness supports low-level RCA or high-level speaker connections, and the auto turn-on selector offers remote-trigger, DC-offset, and audio-sensing modes. Measure the intended mounting area before purchase, secure the enclosure against movement, and set gain, crossover, bass boost, and phase after installation.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768000864447,"sku":"P300-10T","price":232.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71iQtq9eKqL.jpg?v=1782270302"},{"product_id":"rockford-fosgate-r2d410","title":"Rockford Fosgate R2D4-10 10\" Dual 4-Ohm Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate Prime R2D4-10 is a 10-inch dual voice coil car subwoofer designed to add dedicated low-frequency output to an aftermarket audio system. It is a practical upgrade for listeners who want fuller bass than factory door speakers can deliver. With 250 watts RMS power handling, it is suited to properly matched moderate-power subwoofer amplifiers.\u003c\/p\u003e\u003cp\u003eThis model uses dual 4-ohm voice coils to provide installation flexibility when selecting amplifier loads and wiring configurations. A single R2D4-10 can be wired for a 2-ohm or 8-ohm final load, depending on whether its coils are connected in parallel or series. That flexibility can also help when planning a multi-subwoofer system.\u003c\/p\u003e\u003cp\u003eThe R2D4-10 is engineered for controlled bass performance in either sealed or vented enclosures. A sealed enclosure is appropriate where compact size and tighter response are priorities, while the recommended vented design extends lower-frequency output. Its 10-inch format is well suited to many trunks, hatchbacks, trucks, and custom vehicle-specific enclosures.\u003c\/p\u003e\u003cp\u003eA mica-injected polypropylene cone, poly-foam surround, and poly-cotton spider support consistent movement of the woofer assembly. The high-temperature copper voice coil uses an aluminum former, while the optimized motor uses an extended pole and bumped, vented backplate. The StampCast steel basket integrates spider venting to help manage heat around the motor assembly.\u003c\/p\u003e\u003cp\u003eUse the R2D4-10 as the bass foundation of a system with an external amplifier and a correctly sized enclosure. Its dual 12 AWG compression terminals provide secure speaker-wire connections, and its integrated PVC trim ring gives the installation a finished appearance. For system setup, Rockford Fosgate recommends an active low-pass crossover in the 80 to 100 Hz range at 12 dB per octave for subwoofer use.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 Watts RMS Handling:\u003c\/strong\u003e Supports amplifier matching up to its continuous 250-watt RMS rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Allows series or parallel wiring flexibility for compatible amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Subwoofer:\u003c\/strong\u003e Adds dedicated bass without requiring the space of larger drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMica-Injected Polypropylene Cone:\u003c\/strong\u003e Provides a rigid, moisture-resistant cone material for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented StampCast Basket:\u003c\/strong\u003e Helps support cooling around the spider and motor assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Or Vented Compatibility:\u003c\/strong\u003e Supports different enclosure goals for space and bass extension.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe R2D4-10 combines a heavy-gauge proprietary stamped-steel frame with a mica-injected polypropylene cone, sealed poly-foam surround, and fatigue-resistant poly-cotton spider. Its high-temperature copper voice coil is wound on an aluminum former, and the motor structure includes an extended pole with a bumped, vented backplate. A removable PVC motor cover, integrated PVC trim ring, flexible stitched-on lead wires, and metal compression terminals complete the design.\u003c\/p\u003e\u003cp\u003eConfirm available enclosure volume, mounting depth, and cutout space before installation: this subwoofer requires a 9.125-inch cutout and 4.319 inches of mounting depth. Rockford Fosgate specifies a 0.59-cubic-foot sealed enclosure or a 1.40-cubic-foot vented enclosure tuned to 43 Hz; enclosure displacement and port displacement should be considered during box construction. Match the final voice-coil wiring load to an amplifier rated for that impedance, set gain carefully, and use a low-pass crossover for integration with full-range speakers.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768039628991,"sku":"R2D410","price":66.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71ZPmTSRjgL.jpg?v=1782270323"},{"product_id":"rockford-fosgate-r2s-1x10","title":"Rockford Fosgate R2S-1X10 10\" Shallow Loaded Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate R2S-1X10 is a sealed, shallow 10-inch loaded subwoofer enclosure designed to add low-frequency output where conventional subwoofer boxes take up too much room. Its wedge-shaped cabinet is suited to space-conscious installations, including single-cab trucks and other vehicles with limited depth behind or under seating. The enclosure arrives loaded and internally wired, simplifying the path to a compact bass upgrade.\u003c\/p\u003e\u003cp\u003eThis enclosure presents a 2-ohm nominal load and is rated for 200 watts RMS with 400 watts maximum power handling. It is intended for use with an external amplifier that is stable at a 2-ohm speaker load and appropriately power matched. The sealed design supports controlled, space-efficient bass integration rather than requiring a large ported cabinet.\u003c\/p\u003e\u003cp\u003eA single Rockford Fosgate R2SD4-10 shallow dual-voice-coil subwoofer is installed in the enclosure. The driver uses a polypropylene cone, poly-foam surround, steel basket, and high-temperature voice coil with an aluminum former. Its shallow motor arrangement helps make the low-profile enclosure possible.\u003c\/p\u003e\u003cp\u003eThe R2S-1X10 cabinet measures 13.5 inches high by 19.0 inches wide, with a wedge depth of 5.25 inches at the bottom and 3.25 inches at the top. This profile is useful when seat travel or cargo-room clearance limits the enclosure depth available. Quick-release compression terminals provide a straightforward connection point for speaker wire from the amplifier.\u003c\/p\u003e\u003cp\u003eFor a complete bass system, pair the enclosure with suitable amplification, amplifier power wiring, signal connections, and installation hardware appropriate for the vehicle. The included mounting brackets can help secure the enclosure, but vehicle-specific fitment should be verified by measuring the intended location. Proper amplifier gain and crossover setup are important for matching the enclosure to the rest of the audio system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow 10-Inch Enclosure:\u003c\/strong\u003e Fits installations with limited available depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Final Load:\u003c\/strong\u003e Internally wired for compatible 2-ohm amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200-Watt RMS Rating:\u003c\/strong\u003e Supports appropriately matched external amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Wedge Cabinet:\u003c\/strong\u003e Uses a compact truck-style enclosure profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\/8-Inch MDF Construction:\u003c\/strong\u003e Provides a rigid cabinet foundation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick-Release Terminals:\u003c\/strong\u003e Makes speaker-wire connection and removal more convenient.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe R2S-1X10 uses a 5\/8-inch MDF wedge enclosure covered in high-density carpet. Its loaded R2SD4-10 driver incorporates a steel basket, polypropylene cone, poly-foam surround, integrated PVC trim ring, and compression terminal assembly. The slim enclosure is 5.25 inches deep at its lower section and 3.25 inches deep at its upper section.\u003c\/p\u003e\u003cp\u003eConnect the amplifier's positive speaker output to the enclosure's red terminal and the negative output to the black terminal. Use an amplifier rated to operate with a 2-ohm load and keep its continuous output appropriately matched to the enclosure's 200-watt RMS rating. Measure the intended mounting area before installation, secure the enclosure with the included brackets where appropriate, and route speaker wire away from high-current vehicle wiring.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768039727295,"sku":"R2S-1X10","price":160.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71ayc5ur-TL.jpg?v=1782270326"},{"product_id":"rockford-fosgate-r2sd410","title":"Rockford Fosgate R2SD4-10 10\" Shallow DVC Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate R2SD4-10 is a 10-inch shallow-mount subwoofer designed for vehicle installations where conventional subwoofers are too deep. Its compact motor arrangement helps it fit in slim enclosures and space-conscious locations while adding dedicated low-frequency output to a car audio system. It is a practical choice for trucks, coupes, and other vehicles with limited enclosure depth.\u003c\/p\u003e\u003cp\u003eThis Prime R2 subwoofer uses dual 4-ohm voice coils, giving installers flexibility to configure the driver for a 2-ohm or 8-ohm final load. It is rated for 200 watts RMS and 400 watts maximum power handling. Matching it with an amplifier that is stable at the selected impedance is important for proper system setup.\u003c\/p\u003e\u003cp\u003eThe R2SD4-10 is optimized for sealed enclosures, where its recommended 0.70-cubic-foot internal volume supports a compact installation. A vented enclosure can also be used when built to the published 1.40-cubic-foot recommendation. This lets the subwoofer serve different system goals while retaining a shallow mounting profile.\u003c\/p\u003e\u003cp\u003eIts injection-molded polypropylene cone and sealed poly-foam surround are designed for durable operation in an automotive environment. A high-temperature copper voice coil on an aluminum former supports thermal handling, while the stitched flexible lead-wire design helps manage repeated cone movement. The shallow motor assembly is paired with a vented backplate to support cooling.\u003c\/p\u003e\u003cp\u003eThe heavy-gauge stamped-steel frame and spider-vented basket provide a stable mounting structure for the driver. Dual 12 AWG compression terminals simplify connection to suitable speaker wire. For a complete bass upgrade, install the R2SD4-10 in a correctly sized enclosure and use an amplifier with an appropriate low-pass crossover setting.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow-Mount Design:\u003c\/strong\u003e Fits installations where enclosure depth is limited.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Supports 2-ohm or 8-ohm wiring configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200-Watt RMS Rating:\u003c\/strong\u003e Matches moderate-power subwoofer amplifier systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInjection-Molded Polypropylene Cone:\u003c\/strong\u003e Provides a rigid cone structure for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpider-Vented Steel Basket:\u003c\/strong\u003e Helps promote airflow around the motor assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed-Enclosure Optimization:\u003c\/strong\u003e Supports compact 0.70-cubic-foot sealed box designs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe R2SD4-10 combines a heavy-gauge stamped-steel frame with a shallow motor assembly, integrated PVC trim ring, sealed poly-foam surround, and injection-molded polypropylene cone. Its high-temperature copper voice coil uses an aluminum former, and the basket incorporates spider venting. Dual 12 AWG compression terminals provide the connection points for the two voice coils.\u003c\/p\u003e\u003cp\u003ePlan for a 9.125-inch mounting cutout and approximately 3.42 inches of mounting depth. A 0.70-cubic-foot sealed enclosure is the published recommended application, while a 1.40-cubic-foot vented enclosure can be used with one 4-inch-diameter by 13.7-inch-long port tuned to 42 Hz. Wire the voice coils in series for an 8-ohm load or parallel for a 2-ohm load, and configure the amplifier crossover appropriately for subwoofer use.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768039858367,"sku":"R2SD410","price":93.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71hOTF0HSdL.jpg?v=1782270331"},{"product_id":"rockford-fosgate-p3sd410","title":"Rockford Fosgate P3SD4-10 10\" Shallow DVC Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate P3SD4-10 is a 10-inch shallow-mount car subwoofer designed for vehicles where conventional subwoofers do not have enough mounting depth. Its 3.50-inch mounting depth helps make bass-system upgrades practical in space-conscious applications. Dual 4-ohm voice coils provide wiring flexibility for matching a compatible amplifier.\u003c\/p\u003e\u003cp\u003eRated for 300 watts RMS and 600 watts maximum power handling, this Punch P3S model is intended to add low-frequency output without requiring a deep enclosure. It is a suitable choice for trucks, compact cars, and custom installations with limited behind-panel or under-seat space. The 40-250 Hz frequency-response specification supports its role as a dedicated bass driver in a larger car-audio system.\u003c\/p\u003e\u003cp\u003eThe P3SD4-10 uses an anodized aluminum cone and dustcap with an M-Roll Santoprene surround. This combination is paired with a shallow motor assembly, dual linear spiders, and embedded 16 AWG tinsel leads. Its StampCast basket incorporates spider venting to support airflow around the motor structure.\u003c\/p\u003e\u003cp\u003eRockford Fosgate specifies this subwoofer for either sealed or vented enclosures, allowing the installation to be tailored to available space and system goals. A 0.5 cubic-foot sealed enclosure is the listed ideal recommendation, while a 1.0 cubic-foot vented enclosure is also specified. The subwoofer itself displaces 0.074 cubic feet, which should be considered during enclosure planning.\u003c\/p\u003e\u003cp\u003eFor a complete system, pair the P3SD4-10 with a compatible mono or multi-channel amplifier, appropriate enclosure, wiring, and crossover setup. Its dual 4-ohm coils can be wired to a 2-ohm or 8-ohm final load for one subwoofer, depending on the amplifier and wiring arrangement. The shallow format makes it especially useful when installation depth is the primary constraint.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow-Mount Profile:\u003c\/strong\u003e A 3.50-inch mounting depth supports installations with limited clearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Provides series or parallel wiring options for amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300-Watt RMS Rating:\u003c\/strong\u003e Supports power handling appropriate for a dedicated bass channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnodized Aluminum Cone:\u003c\/strong\u003e Uses a rigid cone and matching aluminum dustcap.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStampCast Vented Basket:\u003c\/strong\u003e Integrates spider venting to support motor airflow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Or Vented Compatible:\u003c\/strong\u003e Allows use in either recommended enclosure style.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P3SD4-10 combines a shallow motor assembly with a StampCast basket, anodized aluminum cone and dustcap, M-Roll Santoprene surround, and dual linear spiders. It also uses embedded 16 AWG tinsel leads and dual 10 AWG compression terminals. A diamond-cut cast-aluminum trim ring is included in the design, while a grille is optional.\u003c\/p\u003e\u003cp\u003eUse a 9.06-inch cutout and allow at least 3.50 inches of mounting depth behind the mounting surface. Rockford Fosgate lists a 0.40-1.00 cubic-foot sealed enclosure range, with 0.5 cubic feet as the ideal sealed volume; its recommended vented design uses 1.0 cubic foot gross internal volume and one 4-by-12-inch port. When using a vented enclosure, a subsonic filter is recommended by the owner’s manual.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768040382655,"sku":"P3SD410","price":115.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61BDzY6jy6L.jpg?v=1782270351"},{"product_id":"rockford-fosgate-p1-s4-10","title":"Rockford Fosgate P1-S4-10 10\" 4-Ohm SVC Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate P1-S4-10 is a 10-inch single-voice-coil subwoofer designed to add dedicated low-frequency output to a vehicle audio system. Its 4-ohm nominal impedance makes it suited to systems using a compatible mono or bridged amplifier channel. With 250 watts RMS power handling, it is intended for balanced aftermarket bass upgrades rather than extreme-power competition systems.\u003c\/p\u003e\u003cp\u003eThis Punch P1 model is a practical choice for listeners who want fuller impact from music without moving to a larger subwoofer. Its 10-inch format can work well where cargo space and enclosure size are important considerations. The subwoofer is designed for either sealed or vented enclosures, allowing the installation to be tailored for compactness or deeper extension.\u003c\/p\u003e\u003cp\u003eA Kevlar-reinforced paper-pulp cone provides the moving surface, while a high-density NBR rubber surround supports cone travel. The high-temperature 2-inch voice coil uses a spun-laced Nomex insulating reinforcement collar. These materials are paired with a poly-cotton spider and flexible stitched-on lead wires for dependable operation under normal rated use.\u003c\/p\u003e\u003cp\u003eRockford Fosgate uses a vented motor structure with an extended pole piece and bumped backplate to support voice-coil cooling and movement. Its integrated spider venting design helps manage heat around the motor assembly. The stamped-steel frame, removable PVC motor cover, and radial compression terminals complete a purpose-built woofer design.\u003c\/p\u003e\u003cp\u003eThe P1-S4-10 works as a single-subwoofer upgrade or as part of a matched multi-subwoofer system when the amplifier can safely support the final wiring load. A sealed enclosure offers a smaller recommended box option, while the specified vented enclosure is tuned for lower system extension. Proper amplifier gain setting, enclosure construction, and polarity are important for getting consistent performance from the subwoofer.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e250-Watt RMS Handling:\u003c\/strong\u003e Supports amplifier matching around its continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Single Voice Coil:\u003c\/strong\u003e Provides a straightforward nominal load for compatible amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKevlar-Reinforced Paper Cone:\u003c\/strong\u003e Balances rigidity and controlled low-frequency response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Temperature 2-Inch Voice Coil:\u003c\/strong\u003e Built for thermal durability at rated power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpider Venting Design:\u003c\/strong\u003e Helps promote airflow around the voice-coil area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Or Vented Compatibility:\u003c\/strong\u003e Allows enclosure selection based on space and bass goals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P1-S4-10 uses a heavy-gauge stamped-steel frame with compound-bend geometry, a high-density NBR rubber surround, and a tear- and fatigue-resistant poly-cotton spider. Its motor assembly includes optimized magnetics, an extended pole piece, and a bumped vented backplate. A soft-touch trim ring is included and is designed to accommodate an optional integrated grille.\u003c\/p\u003e\u003cp\u003ePlan for a 9.14-inch cutout diameter and 5.33 inches of mounting depth, plus clearance behind the magnet and wiring terminals. Rockford Fosgate specifies a 0.59-cubic-foot sealed enclosure or a 1.40-cubic-foot vented enclosure; these are gross internal volumes before driver and port displacement. Connect the subwoofer to an amplifier stable at its 4-ohm load, observe polarity, and set amplifier gain conservatively to avoid distortion.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768040448191,"sku":"P1-S4-10","price":59.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61rwkgUc0OL_aef016e2-0e35-4469-9ec3-19a29a4e471c.jpg?v=1782270353"},{"product_id":"rockford-fosgate-p3-d2-10","title":"Rockford Fosgate P3-D2-10 10\" Dual 2-Ohm Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate P3-D2-10 is a 10-inch dual-voice-coil subwoofer designed to add controlled low-frequency output to a car audio system. Its dual 2-ohm voice coils provide wiring flexibility for matching a compatible mono or multi-channel amplifier. It is intended for listeners building or upgrading a dedicated bass system rather than relying on factory full-range speakers alone.\u003c\/p\u003e\u003cp\u003eWith a 500-watt RMS power rating, the P3-D2-10 is suited to an amplifier selected and tuned for its continuous power capability and final impedance load. Its frequency response is rated from 26.6 to 250 Hz, supporting deep bass reproduction while allowing the system crossover to focus the driver on low frequencies. An 82 dB sensitivity rating helps describe its output efficiency under standardized measurement conditions.\u003c\/p\u003e\u003cp\u003eThe driver uses an anodized aluminum cone and dustcap, plus a high-temperature voice coil with a spun-laced Nomex reinforcement collar. Its motor design includes an extended pole piece, bumped vented backplate, and integrated spider venting to support cooling during demanding playback. A 2.5-inch, four-layer voice coil and double-stack ferrite magnet structure support the subwoofer's power-handling design.\u003c\/p\u003e\u003cp\u003eIts StampCast basket combines stamped and cast construction to provide a rigid mounting structure while managing weight and resonance. The basket also incorporates FlexFit mounting provisions for installation flexibility. A protective PVC-textured magnet cover and diamond-cut cast aluminum trim ring complete the exterior design.\u003c\/p\u003e\u003cp\u003eThe P3-D2-10 can be installed in either sealed or vented enclosures, depending on the desired balance of enclosure size, bass character, and output. Rockford Fosgate specifies a 0.59-cubic-foot optimum sealed enclosure or a 1.40-cubic-foot optimum vented enclosure before driver and port displacement. Pair it with a properly configured low-pass crossover and an amplifier that remains stable at the selected series or parallel voice-coil wiring load.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Supports 1-ohm parallel or 4-ohm series wiring for amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500-Watt RMS Handling:\u003c\/strong\u003e Provides a continuous-power target for selecting a compatible amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnodized Aluminum Cone:\u003c\/strong\u003e Adds a rigid cone and dustcap assembly for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Spider Venting:\u003c\/strong\u003e Helps move air around the motor assembly for cooling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStampCast Basket:\u003c\/strong\u003e Combines structural support with a resonance-conscious basket design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-AWG Push Terminals:\u003c\/strong\u003e Accepts substantial speaker wire for secure system connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P3-D2-10 uses an anodized aluminum cone and dustcap, a rubberized over-mold, a high-temperature voice coil, and a protective PVC-textured magnet cover. Its double-stack ferrite magnet structure, extended pole piece, and bumped vented backplate are part of the driver motor design. The included decorative trim ring is cast aluminum and is designed to accommodate an optional grille insert.\u003c\/p\u003e\u003cp\u003eAllow for a 9.13-inch cutout diameter and 6.18 inches of mounting depth when planning the enclosure. Rockford Fosgate specifies sealed and vented enclosure alignments; enclosure volumes are gross internal volumes before speaker and port displacement. Use an active low-pass crossover in the 80-100 Hz range as recommended in the installation manual, and use a subsonic filter with vented enclosures for protection below the usable bass range.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768040480959,"sku":"P3-D2-10","price":159.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61rGhW3iTAL_372de68d-bd05-44ca-8bd4-4a42c74d2f3e.jpg?v=1782270355"},{"product_id":"rockford-fosgate-r2d210","title":"Rockford Fosgate R2D2-10 10\" Dual 2-Ohm Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate R2D2-10 is a 10-inch Prime Series subwoofer designed to add dedicated low-frequency output to an aftermarket car audio system. Its dual 2-ohm voice coils provide wiring flexibility for matching an amplifier's supported load. With 250 watts RMS power handling, it is suited to systems built around moderate-power mono amplification.\u003c\/p\u003e\u003cp\u003eThis subwoofer is intended for listeners who want fuller bass response without moving to a larger 12-inch driver. It can be used in either a sealed or vented enclosure, allowing the installation to be tailored to available space and listening priorities. A sealed box supports a compact, controlled setup, while a properly designed vented box increases output around its tuning frequency.\u003c\/p\u003e\u003cp\u003eThe R2D2-10 uses a mica-injected polypropylene cone and poly-foam surround to support consistent cone movement during bass playback. Its 4-layer high-temperature copper voice coil is wound on an aluminum former. The driver is specified for a 45-250 Hz frequency response and has 6.5 mm of linear excursion.\u003c\/p\u003e\u003cp\u003eIts StampCast steel basket incorporates spider venting, while the motor uses an extended pole and bumped vented backplate. These design elements help manage heat and support the moving assembly. Stitched flexible lead wires are used to reduce strain at the spider connection.\u003c\/p\u003e\u003cp\u003eThe dual 2-ohm voice-coil configuration can be wired in series for a 4-ohm final load or in parallel for a 1-ohm final load when using one subwoofer. Select an amplifier that is stable at the intended final impedance and provides power appropriate for the 250-watt RMS rating. This makes the R2D2-10 a practical foundation for a single-subwoofer system or a matched multi-subwoofer installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e250-Watt RMS Handling:\u003c\/strong\u003e Supports amplifier matching for sustained bass playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Allows series or parallel wiring options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Driver:\u003c\/strong\u003e Fits compact custom or prefab subwoofer enclosures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMIPP Cone:\u003c\/strong\u003e Mica-injected polypropylene supports controlled low-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented StampCast Basket:\u003c\/strong\u003e Helps support motor ventilation during operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Or Vented Compatibility:\u003c\/strong\u003e Accommodates different enclosure and output goals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe R2D2-10 combines a mica-injected polypropylene cone, high-density poly-foam surround, poly-cotton spider, and heavy-gauge stamped steel frame. It uses a high-temperature copper voice coil with an aluminum former, all-metal compression terminals, and a removable PVC motor cover. The double-stacked ferrite magnet motor structure is rated with a 43-ounce magnet weight.\u003c\/p\u003e\u003cp\u003eAllow for a 9.13-inch mounting cutout and 4.33-inch mounting depth when planning the enclosure. Rockford Fosgate lists a 0.59-cubic-foot optimum sealed enclosure and a 1.40-cubic-foot optimum vented enclosure tuned to 43 Hz. For vented use, the manufacturer recommends a subsonic or infrasonic filter; an active 80-100 Hz low-pass crossover at 12 dB per octave is also recommended for subwoofer integration.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768042447039,"sku":"R2D210","price":66.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/7131KWTrmqL.jpg?v=1782270390"},{"product_id":"rockford-fosgate-r2sd210","title":"Rockford Fosgate R2SD2-10 10\" Shallow DVC Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate R2SD2-10 is a 10-inch shallow-mount car subwoofer designed for vehicles where conventional subwoofer depth is difficult to accommodate. Its low-profile motor structure helps it fit in compact enclosures and restricted mounting locations. It is a practical choice for adding low-frequency output to trucks, coupes, hatchbacks, and other space-conscious installations.\u003c\/p\u003e\u003cp\u003eThis Prime R2 model uses dual 2-ohm voice coils, giving installers wiring flexibility when matching the subwoofer to a compatible amplifier. It is rated for 200 watts RMS and 400 watts maximum power. The design is intended for a controlled, bass-focused upgrade rather than a full-range speaker application.\u003c\/p\u003e\u003cp\u003eA mica-injected polypropylene cone and poly-foam surround provide a durable moving assembly for everyday automotive use. The shallow motor assembly and high-excursion design help the driver produce bass while keeping mounting depth to 3.417 inches. Its 83 dB sensitivity specification and 38.1 Hz free-air resonance support use in a properly designed enclosure.\u003c\/p\u003e\u003cp\u003eThe R2SD2-10 uses a StampCast basket with integrated spider venting to promote airflow around the motor structure. An anodized aluminum voice-coil former, linear spider, and embedded 16 AWG tinsel leads support the driver’s mechanical design. Dual 12 AWG compression terminals provide a secure connection point for speaker wire.\u003c\/p\u003e\u003cp\u003eRockford Fosgate optimizes this model for sealed enclosures, with a recommended sealed volume of 0.7 cubic foot. It can also be used in a vented enclosure when built to the published 1.4 cubic foot recommendation and port specifications. Pair it with an amplifier that is stable at the final impedance created by the selected dual-voice-coil wiring configuration.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow-Mount Design:\u003c\/strong\u003e A 3.417-inch mounting depth helps fit bass into compact locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200W RMS Handling:\u003c\/strong\u003e Supports an amplifier system matched for 200 watts RMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Provides wiring options for compatible amplifier impedance loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMica-Injected Polypropylene Cone:\u003c\/strong\u003e Delivers a rigid, moisture-resistant cone material for vehicle use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpider-Vented StampCast Basket:\u003c\/strong\u003e Helps promote motor cooling while supporting the shallow structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed-Enclosure Optimization:\u003c\/strong\u003e Designed around a 0.7-cubic-foot sealed enclosure recommendation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe R2SD2-10 combines a shallow motor assembly with a StampCast basket, integrated PVC trim ring, mica-injected polypropylene cone, and poly-foam surround. Its linear spider incorporates embedded 16 AWG tinsel leads, while the voice coil uses an anodized aluminum former. Dual 12 AWG compression terminals are provided for speaker-wire connection.\u003c\/p\u003e\u003cp\u003eConfirm that the installation location has at least 3.417 inches of mounting depth and supports a 9.125-inch cutout. For a sealed build, use the recommended 0.7-cubic-foot enclosure volume; a 1.4-cubic-foot vented enclosure is also specified with a 4-inch port, 13.7-inch port length, and 42 Hz tuning frequency. Wire both 2-ohm voice coils according to the amplifier’s supported load and use an active low-pass crossover in the recommended 80–100 Hz range.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768042479807,"sku":"R2SD210","price":74.66,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71hOTF0HSdL_d54d7c1f-a375-468e-abfc-f06e6777bc77.jpg?v=1782270392"},{"product_id":"rockford-fosgate-p300-10","title":"Rockford Fosgate P300-10 10\" Powered Subwoofer Enclosure","description":"\u003cp\u003eThe Rockford Fosgate P300-10 is a self-powered bass enclosure built around a single 10-inch subwoofer and an integrated 300-watt RMS amplifier. It provides a compact way to add low-frequency output without separately selecting, wiring, and mounting an external amplifier and subwoofer enclosure. The sealed wedge enclosure is suited to vehicle installations where cargo-space efficiency and straightforward integration are priorities.\u003c\/p\u003e\u003cp\u003eThis model is designed for drivers upgrading either a factory or aftermarket audio system. Its RCA and speaker-level input options allow it to accept signal from a variety of source units, including systems without dedicated preamp outputs. A selectable automatic turn-on function can further simplify integration with compatible factory speaker wiring.\u003c\/p\u003e\u003cp\u003eThe P300-10 is rated for 300 watts RMS and 600 watts peak, with a 35 Hz to 200 Hz frequency response. Its adjustable low-pass crossover lets the bass range be blended with the vehicle's full-range speakers. An adjustable Punch Bass control and 0°\/180° phase switch provide additional setup flexibility for the vehicle and installation location.\u003c\/p\u003e\u003cp\u003eRockford Fosgate uses a matched, closed-loop approach that combines the woofer, amplifier, and enclosure as one system. The built-in 12 dB-per-octave Butterworth low-pass filter is adjustable from 50 Hz to 200 Hz. Gain adjustment and the included wired Punch Level Control make it possible to set the enclosure's output for the system and make bass-level changes from the front of the vehicle.\u003c\/p\u003e\u003cp\u003eThe enclosure uses quick-disconnect power and signal connections, which can make removal easier when cargo space is needed. Its wedge profile measures 13.3 inches high by 18.0 inches wide, with 8.9-inch and 5.9-inch depth measurements. It is a practical powered-subwoofer option for trunk or passenger-compartment installations with adequate ventilation around the amplifier section.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300-Watt RMS Amplifier:\u003c\/strong\u003e Integrated amplification is matched to the included 10-inch subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Wedge Enclosure:\u003c\/strong\u003e Compact cabinet profile helps conserve usable vehicle space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA And Speaker-Level Inputs:\u003c\/strong\u003e Connects with aftermarket or many factory audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Low-Pass Crossover:\u003c\/strong\u003e Adjusts from 50 Hz to 200 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePunch Bass Control:\u003c\/strong\u003e Provides adjustable bass boost from 0 to +12 dB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Punch Level Control:\u003c\/strong\u003e Lets the driver adjust subwoofer output remotely.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P300-10 combines a proprietary 10-inch woofer, integrated amplifier, and sealed enclosure in a single assembly. The enclosure is constructed from 5\/8-inch MDF and covered in industrial heat-activated vinyl. A Power\/Protect indicator and protection circuitry help communicate operating status, while the quick-disconnect power connector supports convenient service or removal.\u003c\/p\u003e\u003cp\u003eInstallation requires battery power, chassis ground, and an input signal connection; a remote turn-on lead may be used, or the unit can be configured for DC-offset or audio-sense turn-on. Use the supplied RCA\/speaker harness for low-level RCA or high-level speaker input, set the input-level switch accordingly, and secure the enclosure in a structurally sound location. Leave at least 1 inch of air space around the amplifier heatsink, use properly fused power wiring, and have a qualified installer complete the work if needed.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768043364543,"sku":"P300-10","price":225.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/81zxcNNdtsL.jpg?v=1782270425"},{"product_id":"rockford-fosgate-p3s-1x10","title":"Rockford Fosgate P3S-1X10 10\" Shallow Loaded Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate P3S-1X10 is a loaded 10-inch shallow subwoofer enclosure designed for vehicles with limited mounting depth. Its sealed wedge enclosure helps bring bass reinforcement to trucks and other installations where a conventional deep subwoofer box may not fit. The enclosure arrives with a Punch P3 shallow subwoofer already installed and wired.\u003c\/p\u003e\u003cp\u003eThis model is intended for listeners who need a compact bass upgrade without building a custom enclosure. Its slim profile is useful behind seats, in space-conscious cargo areas, and in other depth-limited locations. Measure the available space carefully before purchase, including clearance for terminals and wiring.\u003c\/p\u003e\u003cp\u003eThe sealed enclosure design supports controlled, focused low-frequency performance rather than the character of a larger vented enclosure. With 300 watts RMS power handling and a 1-ohm final load, it is suited to a compatible mono amplifier rated for stable 1-ohm operation. The loaded enclosure is specified for a 40-250 Hz frequency response.\u003c\/p\u003e\u003cp\u003eInside is a Rockford Fosgate P3SD2-10 shallow-mount subwoofer with dual 2-ohm voice coils wired internally to a 1-ohm load. The driver uses an anodized aluminum cone, Santoprene surround, dual spider construction, and a shallow motor assembly. These design elements allow the subwoofer to operate in a slim enclosure while maintaining its specified excursion and power capability.\u003c\/p\u003e\u003cp\u003eThe P3S-1X10 provides a straightforward path to adding a dedicated bass channel to an aftermarket audio system. Pair it with an appropriate amplifier, amplifier wiring kit, signal connection method, and installation hardware for the vehicle. Mounting brackets and self-tapping screws are included to help secure the enclosure during installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoaded 10-Inch Design:\u003c\/strong\u003e Includes one factory-installed Punch P3 shallow subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Final Load:\u003c\/strong\u003e Internally wired for a compatible 1-ohm-stable amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Handling:\u003c\/strong\u003e Supports amplifier matching up to its continuous rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Wedge Enclosure:\u003c\/strong\u003e Delivers compact placement with controlled bass response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow-Mount Construction:\u003c\/strong\u003e Helps fit locations with limited available depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick-Release Terminals:\u003c\/strong\u003e Accept speaker wire up to 10 AWG.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe enclosure is built from 5\/8-inch medium-density fiberboard and covered in carpet, with a stitched Diamond-R logo. Its slim-line wedge shape measures 13.5 inches high by 19.0 inches wide, with a 5.25-inch bottom depth and 3.25-inch top depth. The installed P3SD2-10 uses an anodized aluminum cone, Santoprene surround, cast trim ring, and shallow motor assembly.\u003c\/p\u003e\u003cp\u003eUse the included metal mounting brackets and four self-tapping screws to secure the enclosure to a suitable vehicle structure. Connect amplifier positive output to the red enclosure terminal and negative output to the black terminal, keeping speaker wire away from high-current vehicle wiring where practical. Because the enclosure presents a 1-ohm load, use only an amplifier specified to operate safely at 1 ohm and set gain appropriately for the 300-watt RMS rating.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768045035711,"sku":"P3S-1X10","price":236.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71-thRj6GaL.jpg?v=1782270453"},{"product_id":"rockford-fosgate-rzr14-stg3","title":"Rockford Fosgate RZR14-STG3 RZR Kit With 6.5\" Speakers \u0026 10\" Sub","description":"\u003cp\u003eThe Rockford Fosgate RZR14-STG3 is a complete Stage 3 audio system engineered for select Polaris RZR side-by-side models. It combines a dash-mounted digital media receiver, front speakers, a front-mounted subwoofer, amplification, RGB lighting control, vehicle-specific enclosures, and wiring. The kit is intended for riders who want a coordinated audio upgrade without selecting every major component separately.\u003c\/p\u003e\u003cp\u003eThe system uses a PMX-2 AM\/FM\/weather-band digital media receiver for Bluetooth streaming, USB playback and charging, auxiliary input, and Pandora control. Its 2.7-inch color TFT display is integrated through the included RZR14-DK upper\/lower dash kit. The receiver provides source control while the external M5-800X4 amplifier supplies the primary system power.\u003c\/p\u003e\u003cp\u003eFor the main soundstage, the kit includes a pair of M1-65B 6.5-inch two-way Color Optix speakers installed in RZR14-FSE front speaker enclosures. These 4-ohm speakers are rated at 75 watts RMS each and use RGB illumination. Their purpose-built enclosures position the speakers in the front of compatible RZR cabins without requiring custom speaker pods.\u003c\/p\u003e\u003cp\u003eLow-frequency output comes from the included M1D2-10B 10-inch dual-voice-coil Color Optix subwoofer and RZR14-FWE front loaded enclosure. The subwoofer is rated for 300 watts RMS and has a switchable 1-ohm or 4-ohm nominal impedance configuration. The enclosure is ported and is designed to mount in the vehicle while preserving passenger space.\u003c\/p\u003e\u003cp\u003eThe M5-800X4 four-channel amplifier provides 800 watts total rated RMS power and is preset for the included system configuration. Color Optix lighting is managed by the included PMX-RGB controller and can be adjusted through the RF Connect mobile app. With its supplied vehicle-specific mounting hardware and 8-gauge installation harness, this kit provides a direct-fit foundation that can be expanded within the Rockford Fosgate RZR audio ecosystem.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Stage 3 System:\u003c\/strong\u003e Includes the receiver, amplifier, speakers, subwoofer, enclosures, wiring, dash kit, and RGB controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePMX-2 Digital Receiver:\u003c\/strong\u003e Adds Bluetooth streaming, AM\/FM\/weather-band radio, USB, auxiliary input, and a 2.7-inch color display.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM1-65B Front Speakers:\u003c\/strong\u003e A pair of 6.5-inch two-way speakers provides amplified front-cabin sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Color Optix Subwoofer:\u003c\/strong\u003e The included loaded front enclosure adds dedicated bass output without a custom box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM5-800X4 Amplifier:\u003c\/strong\u003e Four-channel external amplification supplies 100 watts RMS per channel at 2 or 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor Optix Lighting Control:\u003c\/strong\u003e PMX-RGB controller supports adjustable RGB speaker and subwoofer illumination through RF Connect.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe RZR14-STG3 uses Element Ready components intended for exposure to outdoor motorsports conditions, including dust, water, UV exposure, vibration, and corrosion. The vehicle-specific dash kit and front enclosures are designed around factory mounting locations and a factory-style appearance. The M1 speakers and subwoofer use UV-stable components, integrated lighting connections, and protective grilles.\u003c\/p\u003e\u003cp\u003eVerify exact vehicle fitment before ordering, including model year, seating configuration, factory options, and dash-pocket availability. The kit includes an RZR14-K8 8-gauge amplifier installation kit, direct-fit enclosures, a wired antenna, and mounting hardware; follow the supplied installation instructions and amplifier preset guidance. On applicable 2014-2018 RZR models, the PMX source unit uses the lower dash pocket, while applicable 2019-and-newer models use the upper pocket.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768046346431,"sku":"RZR14-STG3","price":1468.93,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71iLnVsQMSL.jpg?v=1782270493"},{"product_id":"rockford-fosgate-rzr14-stg4","title":"Rockford Fosgate RZR14-STG4 RZR Kit with 6.5\" Speakers \u0026 10\" Sub","description":"\u003cp\u003eThe Rockford Fosgate RZR14-STG4 is a complete Stage 4 audio upgrade package for select 2014–2021 Polaris RZR models. It replaces the need to source a receiver, amplifier, speakers, subwoofer, enclosures, wiring, and lighting controller separately. The system is designed for RZR owners who want a coordinated, vehicle-specific audio installation with front and rear sound coverage.\u003c\/p\u003e\u003cp\u003eAt its center is the PMX-2 compact digital media receiver, which adds Bluetooth audio streaming, USB and auxiliary inputs, plus AM\/FM\/weather-band radio. Its 2.7-inch color TFT display is integrated through the included RZR14-DK dash kit. The receiver provides source control while the external amplifier supplies the primary system power.\u003c\/p\u003e\u003cp\u003eThe kit uses a pair of 6.5-inch M1-65B Color Optix coaxial speakers in RZR14-FSE front enclosures and a pair of 6.5-inch M1WL-65MB Color Optix Moto-Cans for rear placement. This layout places full-range sound at both the front and rear of the cabin. The speaker system uses RGB illumination controlled by the included PMX-RGB Color Optix controller.\u003c\/p\u003e\u003cp\u003eLow-frequency output comes from the included 10-inch M1D2-10B dual-voice-coil Color Optix subwoofer installed in the RZR14-FWE direct-fit vented enclosure. The M5-800X4 four-channel Element Ready amplifier provides 100 watts RMS per channel at either 2 or 4 ohms, with preset tuning support for compatible Rockford Fosgate UTV systems. Its crossover controls and compact chassis help it serve as the power foundation for this vehicle-specific package.\u003c\/p\u003e\u003cp\u003eRZR14-STG4 is intended as a coordinated upgrade rather than a universal car-audio bundle. It includes the purpose-built mounting components and harnessing required by the kit design, helping retain cabin space while adding receiver, amplified speakers, bass, and configurable lighting. Confirm vehicle fitment before purchase, particularly if the RZR is equipped with Ride Command, which uses a different system configuration.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Stage 4 Package:\u003c\/strong\u003e Combines a receiver, amplifier, four speakers, subwoofer, enclosures, wiring hardware, and RGB controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePMX-2 Digital Receiver:\u003c\/strong\u003e Adds Bluetooth streaming, USB, auxiliary input, and AM\/FM\/weather-band listening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour 6.5-Inch Speakers:\u003c\/strong\u003e Front coaxials and rear Moto-Cans provide sound coverage throughout the RZR cabin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Loaded Subwoofer:\u003c\/strong\u003e The M1D2-10B and vented enclosure add dedicated low-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM5-800X4 Amplifier:\u003c\/strong\u003e Four-channel Element Ready amplifier supplies 100 watts RMS per channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor Optix Lighting:\u003c\/strong\u003e Included PMX-RGB controller manages compatible RGB speaker and subwoofer illumination.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThis package combines vehicle-specific enclosures, a custom dash kit, and Element Ready audio components made for exposed powersports use. The M1 speakers use mineral-filled polypropylene cones, Santoprene surrounds, and UV-stable lighting components, while the M5-800X4 amplifier has an IPX6-rated Element Ready construction. The front enclosures and vented subwoofer enclosure are shaped for the applicable RZR platform rather than being generic speaker boxes.\u003c\/p\u003e\u003cp\u003eInstall the system only after confirming the exact RZR year, trim, and factory-equipment compatibility. The included RZR14-DK, RZR14-FSE, RZR14-FWE, and RZR14-K8 components are intended to support the receiver, front speakers, subwoofer, amplifier, and wiring installation; follow the supplied vehicle-specific instructions and amplifier preset guidance. The PMX-RGB controller is used with the RF Connect app for Color Optix lighting adjustment.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768046543039,"sku":"RZR14-STG4","price":1958.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71gvMHR6P5L.jpg?v=1782270499"},{"product_id":"rockford-fosgate-x317max-rss","title":"Rockford Fosgate X317MAX-RSS Dual 10\" Can-Am X3 MAX Sub Kit","description":"\u003cp\u003eThe Rockford Fosgate X317MAX-RSS is a vehicle-specific rear bass upgrade for select Can-Am Maverick X3 MAX four-seat models. It adds two loaded 10-inch subwoofer enclosures and a dedicated mono amplifier to compatible Rockford Fosgate Stage-3, Stage-4, Stage-5, or Stage-6 audio systems. The kit is intended for riders who want to extend their existing system with dedicated low-frequency output without adapting universal enclosures.\u003c\/p\u003e\u003cp\u003eEach sealed enclosure is shaped for placement beneath a rear seat, using a left-and-right arrangement made for the X3 MAX cabin. The down-firing subwoofer layout focuses the system on bass reinforcement while preserving a factory-integrated appearance. Its two M2D2-10IB 10-inch subwoofers use the supplied vehicle-specific wiring to create a 2-ohm amplifier load.\u003c\/p\u003e\u003cp\u003eThe included M5-1000X1 mono amplifier is an Element Ready, IPX6-rated design with a 30 Hz infrasonic filter and adjustable low-pass crossover. It delivers 750 watts RMS at 2 ohms, matching the kit's wired load configuration. The amplifier's PRESET function is designed for use with compatible Rockford Fosgate UTV systems, reducing the need for manual amplifier adjustment.\u003c\/p\u003e\u003cp\u003eThis package is built for off-road installations where water spray, dust, vibration, and exposure are practical considerations. The subwoofer enclosures use roto-molded HDPE construction and sealed designs, while the amplifier uses sealed harness and panel interfaces. The system's 2-pin Deutsch\/Amphenol speaker connection supports the supplied plug-and-play harness arrangement.\u003c\/p\u003e\u003cp\u003eThe X317MAX-RSS is an add-on bass solution rather than a standalone source unit or complete audio system. It is designed to use factory mounting locations and includes the primary brackets, hardware, amplifier plate, and harnesses needed for its intended installation. Confirm the vehicle and existing Rockford Fosgate audio-system requirements before purchase, as this kit is not intended for two-seat X3 models.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 10-Inch Subwoofers:\u003c\/strong\u003e Two loaded M2D2-10IB subwoofer enclosures add dedicated bass capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-Specific Fit:\u003c\/strong\u003e Left and right enclosures mount beneath the rear seats of compatible X3 MAX models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed HDPE Enclosures:\u003c\/strong\u003e Roto-molded enclosures provide a durable, vehicle-integrated installation format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM5-1000X1 Mono Amplifier:\u003c\/strong\u003e Included IPX6-rated amplifier powers the supplied subwoofer system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePRESET Setup Mode:\u003c\/strong\u003e Compatible Rockford Fosgate UTV systems can use the amp's preset tuning mode.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Installation Hardware:\u003c\/strong\u003e Brackets, harnesses, mounting hardware, and amplifier mounting parts are included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe X317MAX-RSS uses sealed, down-firing subwoofer enclosures constructed from roto-molded HDPE and textured to complement the vehicle's factory finish. Its M2D2-10IB subwoofers are 10-inch, dual-2-ohm designs with injection-molded mineral-filled polypropylene cones and rubber surrounds. The included M5-1000X1 amplifier is IPX6 rated and uses an Element Ready design with integrated harness and control-panel seals.\u003c\/p\u003e\u003cp\u003eInstall the enclosures under the rear driver and passenger seats and mount the amplifier in the rear center tunnel using the supplied vehicle-specific hardware. The kit includes the enclosure speaker harness and amplifier power\/input-signal harness for direct integration with the required compatible Rockford Fosgate Stage system. Disconnect vehicle battery power before installation, follow the supplied instructions, and verify X3 MAX fitment and existing-system compatibility before ordering.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768047624383,"sku":"X317MAX-RSS","price":1556.55,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61XK7YN11lL.jpg?v=1782270523"},{"product_id":"rockford-fosgate-m1d2-10","title":"Rockford Fosgate M1D2-10 10\" Marine RGB Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate M1D2-10 is a 10-inch marine subwoofer designed to add low-frequency output to marine and motorsport audio systems. Its white finish and integrated RGB lighting suit installations where equipment is both heard and seen. It is sold individually for custom system builds.\u003c\/p\u003e\u003cp\u003eThis model uses dual 2-ohm voice coils and a VersaSwitch configuration system that selects a 1-ohm or 4-ohm nominal load. That flexibility helps simplify matching the subwoofer to a compatible amplifier. The 300-watt RMS power rating makes it appropriate for systems built around moderate-power marine amplification.\u003c\/p\u003e\u003cp\u003eThe M1D2-10 is engineered for clear, controlled bass response across its rated 20 Hz to 750 Hz frequency range. Its 91.5 dB sensitivity and 7 mm Xmax support substantial output from a compact 10-inch format. A 2-inch high-temperature Kapton voice-coil former is used to support sustained operation.\u003c\/p\u003e\u003cp\u003eFor exposed installations, the subwoofer uses Rockford Fosgate's Element Ready construction and carries an IP67 certification. UV-stable ASA frame and grille components, a mineral-filled polypropylene cone, Santoprene surround, and marine-grade terminals address the environmental demands of boats and outdoor powersports vehicles. A vented motor includes water-repelling nano-coated mesh.\u003c\/p\u003e\u003cp\u003eIntegrated Color Optix RGB LEDs provide configurable illumination when used with the separately sold PMX-RGB controller and RF Connect app. Integrated Deutsch and Amphenol connections support plug-and-play lighting connectivity, while conventional spade terminals remain available for speaker wiring. The M1D2-10 can serve as the bass foundation in a coordinated Rockford Fosgate Color Optix system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300-Watt RMS Handling:\u003c\/strong\u003e Supports amplifier matching for sustained bass performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersaSwitch Impedance:\u003c\/strong\u003e Selects a 1-ohm or 4-ohm nominal configuration without external coil-jumper wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor Optix RGB Lighting:\u003c\/strong\u003e Adds controllable multicolor illumination with the optional PMX-RGB controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElement Ready Construction:\u003c\/strong\u003e Uses materials selected for water, salt, and UV exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch DVC Design:\u003c\/strong\u003e Combines a compact marine-friendly size with dual voice-coil flexibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Marine Connectors:\u003c\/strong\u003e Deutsch and Amphenol connections streamline compatible lighting-system wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe M1D2-10 has a white UV-stable ASA plastic frame and grille, an injection-molded mineral-filled polypropylene cone with UV inhibitors, and a co-molded Santoprene VAST surround. Fully insulated silicone tinsel leads, zinc nickel-plated marine-grade brass terminals, linear synthetic-fiber spiders, and a vented motor are incorporated for marine-duty use. The included grille provides a finished appearance and helps protect the driver in exposed mounting locations.\u003c\/p\u003e\u003cp\u003eAllow an 8.90-inch cutout and 4.23 inches of mounting depth when planning the installation. Use an amplifier compatible with the selected 1-ohm or 4-ohm VersaSwitch setting, and follow the amplifier manufacturer's minimum-impedance guidance. RGB lighting requires the separately sold Rockford Fosgate PMX-RGB controller and compatible Color Optix wiring accessories for app-based color control.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768050114751,"sku":"M1D2-10","price":188.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/713badDAyOL.jpg?v=1782270569"},{"product_id":"rockford-fosgate-m1d2-10b","title":"Rockford Fosgate M1D2-10B 10\" Color Optix Marine Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate M1D2-10B is a 10-inch marine subwoofer designed to add dedicated low-frequency output to boat and motorsports audio systems. Its dual 2-ohm voice-coil design and built-in VersaSwitch provide selectable 1-ohm or 4-ohm system impedance. The black Sport grille and integrated RGB lighting give it a coordinated appearance in exposed marine installations.\u003c\/p\u003e\u003cp\u003eThis subwoofer is intended for listeners building a system that needs bass beyond what full-range marine speakers can provide. It handles 300 watts RMS and 1,200 watts maximum power, making it suitable for pairing with a properly matched external amplifier. With a 20 Hz to 750 Hz frequency-response rating and 91.5 dB sensitivity, it is designed for low-frequency system duties.\u003c\/p\u003e\u003cp\u003eColor Optix RGB lighting is integrated into the subwoofer and uses optically clear, UV-stable lighting encapsulation with wide-angle LEDs. When paired with the separately sold Rockford Fosgate PMX-RGB controller, the lighting can be controlled through the RF Connect app. Integrated Deutsch and Amphenol-style connectivity helps support a cleaner lighting installation.\u003c\/p\u003e\u003cp\u003eThe M1D2-10B uses a mineral-filled polypropylene cone, Santoprene VAST surround, synthetic-fiber-blend spider, and high-temperature Kapton dual voice coil. Its vented motor uses a water-repelling nano-coated mesh screen, while insulated silicone tinsel leads and marine-grade terminals support use in exposed environments. The Element Ready construction carries an IP67 rating for marine and motorsports applications.\u003c\/p\u003e\u003cp\u003eFor a complete audio upgrade, the M1D2-10B can be installed in a suitable sealed, vented, or infinite-baffle arrangement as appropriate for the application. Its 4.23-inch mounting depth and 8.90-inch cutout diameter should be verified before installation. Rockford Fosgate recommends an active 80-100 Hz low-pass crossover at 12 dB per octave for subwoofer operation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300-Watt RMS Handling:\u003c\/strong\u003e Supports amplifier matching for substantial bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersaSwitch Impedance:\u003c\/strong\u003e Selects 1-ohm or 4-ohm configuration without rewiring coils.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor Optix RGB LEDs:\u003c\/strong\u003e Adds customizable lighting with a compatible controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 Element Ready Design:\u003c\/strong\u003e Built for water, UV, and marine-environment exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMineral-Filled Polypropylene Cone:\u003c\/strong\u003e Provides a durable cone structure for marine use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Connectors:\u003c\/strong\u003e Simplify speaker and RGB lighting connections during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe M1D2-10B combines a black UV-stable ASA plastic frame and grille with a mineral-filled polypropylene cone, Santoprene surround, synthetic-fiber-blend spider, and zinc nickel-plated marine-grade brass terminals. A vented motor and water-repelling nano-coated mesh screen support its Element Ready, IP67-rated construction. The fixed Sport grille is included with the subwoofer.\u003c\/p\u003e\u003cp\u003ePlan for an 8.90-inch mounting cutout and 4.23 inches of mounting depth. The included Color Optix harness supports lighting hookup, while a PMX-RGB controller is required for RF Connect app control and is sold separately. For hard-wired lighting, Rockford Fosgate specifies a 9-16V supply, a 1-amp fuse, and at least 20-gauge wire; do not connect the lights directly to 12V.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768050180287,"sku":"M1D2-10B","price":150.66,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61UzipHRkvL.jpg?v=1782270571"},{"product_id":"rockford-fosgate-m1d4-10","title":"Rockford Fosgate M1D4-10 10\" Marine LED Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate M1D4-10 is a 10-inch, dual 4-ohm marine subwoofer designed to add dedicated low-frequency output to boat and powersports audio systems. Its white grille and integrated Color Optix RGB LED lighting complement marine installations that need both sound and illumination. The Element Ready construction is intended for environments exposed to water spray and UV light.\u003c\/p\u003e\u003cp\u003eThis subwoofer is suited to system builders who want bass reinforcement without using a conventional car-audio-only driver in an open-air marine environment. It handles 300 watts RMS and 1,200 watts peak, providing a practical match for an appropriately powered mono or multichannel amplifier. Its 91.5 dB sensitivity and 34 Hz free-air resonance support strong bass output in a correctly designed enclosure.\u003c\/p\u003e\u003cp\u003eThe M1D4-10 uses a dual voice coil design and a built-in VersaSwitch for simplified impedance selection. With the switch, the subwoofer can be configured for a 2-ohm or 8-ohm final load, helping match the driver to compatible amplifier channels. This avoids the need for conventional series or parallel jumpers at the subwoofer terminals.\u003c\/p\u003e\u003cp\u003eColor Optix RGB LEDs illuminate the grille area and can be integrated into a Rockford Fosgate Color Optix lighting system. The included Color Optix harness supports connection, while the PMX-RGB controller is sold separately for app-based color and pattern control. LED operation requires a 9 to 16 volt supply and a recommended 1-amp fuse.\u003c\/p\u003e\u003cp\u003eThe M1D4-10 can be used in sealed, vented, or infinite-baffle applications when the enclosure and filtering are appropriate. Rockford Fosgate publishes a 1.1 cubic foot sealed enclosure recommendation and a 1.45 cubic foot vented recommendation. It is a useful upgrade path for a marine system with full-range speakers that needs more low-end weight and impact.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Handling:\u003c\/strong\u003e Supports amplifier matching for sustained bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Provides flexible impedance options for compatible amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersaSwitch Impedance Control:\u003c\/strong\u003e Selects 2-ohm or 8-ohm operation without jumper wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor Optix RGB LEDs:\u003c\/strong\u003e Adds controllable multicolor lighting to the installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 Element Ready Design:\u003c\/strong\u003e Helps protect against water spray and UV exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Marine Subwoofer:\u003c\/strong\u003e Delivers dedicated low-frequency support in marine systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe M1D4-10 combines an injection-molded polypropylene cone with UV protection, a Santoprene rubber surround, linear synthetic fiber blend spiders, and a 1.95-inch four-layer voice coil. Its 100% UV-stable ASA frame and grille, marine-grade brass terminals, insulated silicone tinsel leads, and vented motor with water-repelling mesh are designed for marine use. A fixed Sport grille is included.\u003c\/p\u003e\u003cp\u003ePlan for an 8.9-inch cutout, 4.23-inch mounting depth, and 11-inch overall diameter. For a sealed installation, Rockford Fosgate specifies 1.1 cubic feet total internal volume; its vented design uses 1.45 cubic feet total internal volume with a 3-inch by 9.5-inch port. Use an active 80 to 100 Hz low-pass crossover at 12 dB per octave, and use an infrasonic filter for vented or infinite-baffle applications.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768050213055,"sku":"M1D4-10","price":182.68,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/618h_om3mBL.jpg?v=1782270573"},{"product_id":"rockford-fosgate-t1d210","title":"Rockford Fosgate T1D210 Power 10\" Dual 2-Ohm Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate T1D210 is a 10-inch Power Series subwoofer designed for vehicle audio systems that need dedicated low-frequency output without moving to a larger driver. Its dual 2-ohm voice-coil design provides wiring flexibility for compatible mono or multi-channel amplifier setups. The subwoofer is sold individually and includes a grille and trim ring.\u003c\/p\u003e\u003cp\u003eRated for 600 watts RMS and 1,200 watts maximum power, the T1D210 is intended for systems built around substantial bass power. Its 83 dB sensitivity and 34.5 Hz free-air resonance support use in a properly designed sealed or vented enclosure. The result is a purpose-built subwoofer for listeners upgrading a factory system or building a more capable aftermarket bass section.\u003c\/p\u003e\u003cp\u003eA Kevlar fiber-reinforced paper cone, Santoprene surround, and anodized aluminum dust cap form the moving assembly. Rockford Fosgate uses VAST surround technology to increase effective cone area compared with a conventional surround layout. Dual progressive-roll Nomex spiders, periodic-stitched tinsel leads, and venting around the pole piece and spider are engineered to support controlled cone movement and heat management.\u003c\/p\u003e\u003cp\u003eThe T1D210 uses a 3-inch dual voice coil with copper-clad aluminum wire on an aluminum former. Its SWIFT input connection allows the dual 2-ohm coils to be configured for a 1-ohm or 4-ohm final load when wired as specified for the system. This makes the driver suitable for matching with amplifiers that are stable at either of those impedance loads.\u003c\/p\u003e\u003cp\u003eFor enclosure planning, Rockford Fosgate specifies a 0.75 cubic-foot sealed enclosure or a 1.50 cubic-foot vented enclosure. The 6.375-inch mounting depth and 9.0625-inch cutout requirement should be checked before building or selecting an enclosure. Pair it with an amplifier whose continuous output and supported load are appropriate for the subwoofer's 600-watt RMS rating and chosen wiring configuration.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e600-Watt RMS Rating:\u003c\/strong\u003e Supports amplifier matching for sustained bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Enables 1-ohm or 4-ohm wiring configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVAST Surround Technology:\u003c\/strong\u003e Increases effective cone area within the frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Inch Voice Coil:\u003c\/strong\u003e Built for thermal capacity and controlled operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCast Aluminum Basket:\u003c\/strong\u003e Provides a rigid mounting structure for the driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Grille:\u003c\/strong\u003e Adds protection for the exposed subwoofer cone.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe T1D210 combines a rigid die-cast aluminum basket with a Kevlar fiber-reinforced paper cone, Santoprene surround, aluminum dust cap, and dual Nomex spiders. Its motor structure uses a 100-ounce magnet assembly, while the IDHS inductive damping heat sink and optimized venting are part of its thermal-management design. Compression terminals accept the subwoofer wiring connection, and the trim ring can conceal mounting hardware.\u003c\/p\u003e\u003cp\u003eAllow at least 6.375 inches of mounting depth and cut a 9.0625-inch mounting opening. A 0.75 cubic-foot sealed box is the manufacturer-recommended sealed volume; a 1.50 cubic-foot vented box is the recommended vented volume, using a 4-inch diameter by 11-inch long port in the listed design. When using a vented enclosure, use an infrasonic or subsonic filter to limit very low frequencies below the usable enclosure range.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768050770111,"sku":"T1D210","price":273.7,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61TfGe5sSEL.jpg?v=1782270587"},{"product_id":"rockford-fosgate-t1d410","title":"Rockford Fosgate T1D410 10\" Dual 4-Ohm Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate T1D410 is a 10-inch Power Series subwoofer designed to add controlled low-frequency output to a car audio system. Its dual 4-ohm voice-coil design is suited to systems that need flexible amplifier-load configuration without changing the driver. It is intended for a properly designed enclosure rather than factory speaker locations.\u003c\/p\u003e\u003cp\u003eThis subwoofer is a practical fit for listeners building a dedicated bass stage in a car, truck, or SUV. It is rated for 600 watts RMS and 1,200 watts maximum power handling, giving installers a clear continuous-power target when selecting an amplifier. The 3-inch dual voice coil and substantial motor structure support a focused, low-frequency role in a component system.\u003c\/p\u003e\u003cp\u003eRockford Fosgate's VAST surround technology increases the effective cone area compared with a conventional surround layout. The T1D410 also uses a Kevlar fiber-reinforced paper cone, symmetrical progressive-roll poly-cotton spiders, and stitched tinsel leads. Together, these construction elements are designed to support controlled cone movement during demanding bass passages.\u003c\/p\u003e\u003cp\u003eThe proprietary SWIFT terminal system allows the dual 4-ohm coils to be configured for a nominal 2-ohm or 8-ohm load through its removable impedance-selection jumper. This gives a system designer options when matching the woofer to a compatible mono amplifier. The terminal accepts large 8 AWG input wiring, helping support a secure high-current connection at the enclosure.\u003c\/p\u003e\u003cp\u003eRockford Fosgate specifies the T1D410 primarily for compact ported enclosures, while also providing sealed-enclosure guidance. A 0.75 cu. ft. sealed enclosure is recommended for a compact installation, and a 1.50 cu. ft. ported enclosure is recommended for greater output around its tuning frequency. The included trim ring provides a finished appearance once the subwoofer is mounted in a suitably rigid enclosure.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e600W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching around its continuous thermal rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Allows nominal 2-ohm or 8-ohm configuration through SWIFT.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVAST Surround Technology:\u003c\/strong\u003e Increases effective cone area for a 10-inch woofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Inch Voice Coil:\u003c\/strong\u003e Uses a high-temperature CCAW dual-voice-coil assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIDHS Heat Sink:\u003c\/strong\u003e Helps manage heat at the motor structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexFit Mounting Design:\u003c\/strong\u003e Supports minor mounting-position adjustment during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe T1D410 combines a rigid die-cast aluminum frame with an anodized aluminum heat-sinking dust cap and optimized pole and spider venting. Its cone is made from Kevlar fiber-reinforced paper, while dual progressive-roll poly-cotton spiders and fatigue-resistant stitched tinsel leads are used in the suspension system. A trim ring, socket-head screws, wood screws, and driver bit are supplied with the subwoofer.\u003c\/p\u003e\u003cp\u003ePlan for a 9-1\/8-inch mounting cutout and 6-1\/2-inch mounting depth, plus clearance behind the motor. Rockford Fosgate recommends rigid 3\/4-inch MDF construction with internal bracing, and enclosure volume should account for the subwoofer's 0.078 cu. ft. displacement. Use the SWIFT impedance jumper only as directed, select an amplifier compatible with the resulting 2-ohm or 8-ohm nominal load, and use a subsonic filter with vented enclosures.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768051491007,"sku":"T1D410","price":328.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61TfGe5sSEL_7a9dc888-ab9b-437a-aa50-776a3e054ac0.jpg?v=1782270591"},{"product_id":"rockford-fosgate-p3sd2-10","title":"Rockford Fosgate P3SD2-10 10\" Shallow DVC Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate P3SD2-10 is a 10-inch shallow-mount car subwoofer designed for installations where conventional subwoofers are too deep. Its low-profile 3.50-inch mounting depth helps make bass upgrades possible in compact enclosures and space-limited vehicle locations. It uses dual 2-ohm voice coils for system-wiring flexibility.\u003c\/p\u003e\u003cp\u003eRated for 300 watts RMS and 600 watts maximum power, this Punch P3S model is intended for a properly matched car-audio amplifier and enclosure. It is suited to listeners building a focused low-frequency upgrade without requiring the depth of a full-size subwoofer motor structure. The 83 dB sensitivity specification and 40 Hz resonance frequency provide useful design information when matching it with an enclosure and amplifier.\u003c\/p\u003e\u003cp\u003eAn anodized aluminum cone and aluminum dustcap provide a rigid moving surface, while the M-Roll Santoprene surround supports controlled cone movement. The shallow motor assembly is paired with a dual linear spider design and embedded 16 AWG tinsel leads. These components are engineered for dependable operation in a shallow-format subwoofer.\u003c\/p\u003e\u003cp\u003eThe P3SD2-10 uses a StampCast basket with integrated spider venting to support the assembly and help manage motor heat. Its dual 10 AWG compression terminals provide substantial speaker-wire connection points. The subwoofer is also CEA-2031 compliant.\u003c\/p\u003e\u003cp\u003eThis model can be used in either sealed or vented enclosures, allowing the system design to be tailored to available space and preferred bass character. Rockford Fosgate specifies a 0.50 cubic-foot sealed enclosure as its recommended sealed volume and a 1.00 cubic-foot vented enclosure as its recommended vented volume. Measure the available mounting space, cutout, and enclosure volume before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow-Mount Design:\u003c\/strong\u003e A 3.50-inch mounting depth supports installations with limited rear clearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Provides wiring flexibility when matching the subwoofer to a compatible amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300-Watt RMS Rating:\u003c\/strong\u003e Supports amplifier matching for sustained, rated-power operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Cone And Dustcap:\u003c\/strong\u003e Uses rigid anodized aluminum moving components for the woofer assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStampCast Basket Venting:\u003c\/strong\u003e Integrated spider venting helps manage heat around the motor structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Or Vented Use:\u003c\/strong\u003e Supports recommended enclosure designs for different installation priorities.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P3SD2-10 combines an anodized aluminum cone and dustcap, M-Roll Santoprene surround, dual linear spider, aluminum voice-coil former, and shallow motor assembly. Its hybrid StampCast basket provides structural support, while the diamond-cut cast-aluminum trim ring gives the installation a finished appearance. An optional grille is supported separately.\u003c\/p\u003e\u003cp\u003eUse the 9.06-inch cutout diameter and 3.50-inch mounting depth when planning the baffle and available clearance. Connect both dual 2-ohm voice coils according to an amplifier-compatible wiring plan, and use the dual 10 AWG compression terminals for the speaker connections. For a vented enclosure, Rockford Fosgate specifies a 1.00 cubic-foot gross volume with one 4-inch by 12-inch port; a subsonic filter is recommended for vented use.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768052474047,"sku":"P3SD2-10","price":115.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/61BDzY6jy6L_92742e6f-6d0e-4523-8cbc-8ad9040f647f.jpg?v=1782270613"},{"product_id":"rockford-fosgate-t1s1-10p","title":"Rockford Fosgate T1S1-10P 10\" 1-Ohm Slim Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate T1S1-10P is a shallow-mount 10-inch car subwoofer designed for systems where mounting depth is limited but a dedicated low-frequency driver is still needed. Its 3.01-inch mounting depth helps it fit compact custom enclosures and space-conscious vehicle installations. This is the 1-ohm, single-voice-coil ported-enclosure version of the Power T1 Slim series.\u003c\/p\u003e\u003cp\u003eRated for 500 watts RMS and 1,000 watts maximum power, the T1S1-10P is intended for an amplifier that is stable at a 1-ohm load and appropriately matched to its continuous power rating. Its specified frequency response is 32-250 Hz, supporting the bass range typically handled by a subwoofer in a full car-audio system. The ported design is intended for installations that prioritize output and is also specified for open-air applications such as convertibles.\u003c\/p\u003e\u003cp\u003eThis Gen-2 T1 Slim design combines a shallow profile with a 2.5-inch pure-copper voice coil and composite former. The voice-coil assembly is engineered to manage heat while helping reduce distortion under sustained use. An IDHS inductive damping heat sink is integrated into the motor design to address heat dissipation, back EMF, and system efficiency.\u003c\/p\u003e\u003cp\u003eThe woofer uses a Linear Carbon Fiber\/PMI\/Glass Fiber cone with an aluminum dustcap, paired with a supercritical synthetic organic polymer surround. Its dual Nomex progressive spiders and fatigue-resistant braided flat tinsel leads support controlled cone movement. A high-energy neodymium motor, die-cast aluminum frame, and integrated heat-sink fins complete the structural design.\u003c\/p\u003e\u003cp\u003eFor a complete system, install the T1S1-10P in a properly built ported enclosure and pair it with compatible 1-ohm-stable amplification. Rockford Fosgate specifies a vented enclosure range of 1.0 to 1.50 cubic feet and does not recommend a sealed box for this model. An active low-pass crossover and an infrasonic filter are recommended for ported-enclosure operation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow-Mount Profile:\u003c\/strong\u003e The 3.01-inch mounting depth supports tight installation locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Single Voice Coil:\u003c\/strong\u003e Designed for systems using 1-ohm-stable subwoofer amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500-Watt RMS Handling:\u003c\/strong\u003e Supports properly matched continuous amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorted-Enclosure Design:\u003c\/strong\u003e Optimized for compact vented enclosures and open-air use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePure-Copper Voice Coil:\u003c\/strong\u003e Provides conductivity within a heat-conscious motor assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDie-Cast Aluminum Frame:\u003c\/strong\u003e Provides a rigid mounting structure with integrated cooling fins.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe T1S1-10P uses a composite cone, aluminum dustcap, polymer surround, dual Nomex progressive spiders, and a neodymium motor structure. Its die-cast aluminum frame includes integrated heat-sink fins, while the detachable die-cast aluminum trim ring provides a finished appearance. The speaker terminals use corrosion-resistant tin-plated, slot-loaded brass hardware sized for 10 AWG speaker wire.\u003c\/p\u003e\u003cp\u003eUse a rigid, well-braced ported enclosure built to the required net internal volume after accounting for woofer and port displacement. The recommended optimum 10P enclosure has a 1.25-cubic-foot net volume, 40 Hz tuning, and a 4-inch by 13.75-inch port. Use an active 80-100 Hz low-pass crossover at 12 dB per octave, and set an infrasonic filter 5-10 Hz below enclosure tuning for vented use.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768055259327,"sku":"T1S1-10P","price":437.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71dfrbr_vCL.jpg?v=1782270657"},{"product_id":"rockford-fosgate-t1s1-10s","title":"Rockford Fosgate T1S1-10S 10\" 1-Ohm Slim Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate T1S1-10S is a 10-inch shallow-mount subwoofer made for vehicle audio systems where mounting depth is limited. Its sealed-enclosure design helps make compact bass upgrades practical in truck cabs, behind-seat installations, and other confined spaces. It is sold as one individual subwoofer.\u003c\/p\u003e\u003cp\u003eThis model uses a single 1-ohm voice coil and is rated for 500 watts RMS, with 1,000 watts maximum power handling. It is intended for use with an amplifier that is designed to operate safely at a 1-ohm speaker load. The shallow 3.01-inch mounting depth helps preserve usable vehicle space while accommodating a substantial woofer assembly.\u003c\/p\u003e\u003cp\u003eThe T1S1-10S is optimized for compact sealed enclosures, with a recommended net enclosure volume of 0.5 to 0.75 cubic feet. A sealed enclosure can suit listeners seeking controlled low-frequency response in a compact box. Rockford Fosgate does not recommend a vented enclosure for this sealed-specific version.\u003c\/p\u003e\u003cp\u003eIts moving assembly combines a carbon fiber, PMI, and glass-fiber cone with an aluminum dustcap and a molded polymer surround. The surround uses Nano Cell Direct Injection construction and is chemically bonded to the cone assembly. Dual progressive Nomex spiders and stitched tinsel leads support controlled movement and durability.\u003c\/p\u003e\u003cp\u003eThermal management is central to the T1 Slim design. The subwoofer uses a dual-wound 2.5-inch pure-copper single voice coil on a composite former, along with an aluminum spider spacer and die-cast aluminum basket heat-sink fins. These construction details support power handling in a shallow-format subwoofer for a system built around compact sealed bass.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow 10-Inch Design:\u003c\/strong\u003e Fits installations with only 3.01 inches of mounting depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Single Voice Coil:\u003c\/strong\u003e Provides a nominal 1-ohm load for compatible amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500-Watt RMS Rating:\u003c\/strong\u003e Supports amplifier matching for sustained subwoofer power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed-Box Optimization:\u003c\/strong\u003e Designed for compact sealed enclosures from 0.5 to 0.75 cubic feet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Cone Assembly:\u003c\/strong\u003e Carbon fiber, PMI, and glass fiber help support rigid cone behavior.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced Cooling Construction:\u003c\/strong\u003e Composite former, copper coil, spacer, and heat-sink basket manage heat.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe T1S1-10S uses a die-cast aluminum frame with integrated heat-sink fins, a high-energy neodymium motor structure, and corrosion-resistant tin-plated brass spring terminals. Its cone assembly includes a linear carbon fiber, PMI, and glass-fiber cone with an aluminum dustcap. A detachable die-cast aluminum trim ring is fitted, while a matching protective grille insert is available separately.\u003c\/p\u003e\u003cp\u003ePlan the enclosure around the manufacturer-recommended 0.5 to 0.75 cubic feet sealed net volume and account for the woofer's 0.028 cubic-foot displacement. The mounting cutout requires a 9.13-inch diameter opening, and the enclosure must provide at least 3.01 inches of mounting depth. Use appropriately sized speaker cable with the 10 AWG slot-loaded terminals and pair the woofer with an amplifier rated for a 1-ohm load.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768055292095,"sku":"T1S1-10S","price":437.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71dfrbr_vCL_91d1e877-0469-48fa-96dc-bd9df56064ff.jpg?v=1782270659"},{"product_id":"rockford-fosgate-t1s2-10p","title":"Rockford Fosgate T1S2-10P 10\" 2-Ohm Slim Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate T1S2-10P is a shallow-mount 10-inch subwoofer designed for vehicle installations where mounting depth is limited. Its 2-ohm single voice coil configuration is intended for systems using an amplifier stable at a 2-ohm load. This model is engineered specifically for a ported enclosure rather than a sealed box.\u003c\/p\u003e\u003cp\u003eWith 500 watts RMS and 1,000 watts maximum power handling, the T1S2-10P is suited to listeners building a compact system that still needs substantial low-frequency output. Its shallow 3.01-inch mounting depth helps it fit in space-restricted locations such as behind seats or in custom low-profile enclosures. The ported alignment supports a more output-focused bass presentation when installed in the recommended enclosure volume range.\u003c\/p\u003e\u003cp\u003eThis Power T1 Slim model uses a single 2.5-inch voice coil with pure copper wire and a composite voice-coil former. The motor structure incorporates an inductive damping heat sink and heat-dissipating frame fins to help manage operating temperatures. A high-energy neodymium motor supports the compact installation depth.\u003c\/p\u003e\u003cp\u003eThe moving assembly combines a carbon fiber, PMI, and glass-fiber cone with an aluminum dustcap. Its co-molded polymer surround uses Nano Cell Direct Injection construction, while dual progressive Nomex spiders help control cone movement. These materials and suspension components are designed for durable operation in a compact subwoofer format.\u003c\/p\u003e\u003cp\u003eFor a complete system, pair this subwoofer with a compatible mono or subwoofer amplifier that delivers appropriate power at 2 ohms, plus a properly designed ported enclosure. Rockford Fosgate recommends an infrasonic filter for vented installations to limit excessive low-frequency excursion. An active low-pass crossover in the 80-100 Hz range is also recommended in the owner’s manual for subwoofer integration.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow 10-Inch Design:\u003c\/strong\u003e Uses only 3.01 inches of mounting depth for compact custom installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorted-Enclosure Alignment:\u003c\/strong\u003e Optimized for vented boxes and not recommended for sealed enclosures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500-Watt RMS Handling:\u003c\/strong\u003e Supports amplifier matching for sustained bass output at its rated power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Single Voice Coil:\u003c\/strong\u003e Provides a fixed 2-ohm nominal load for compatible amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Cone Assembly:\u003c\/strong\u003e Combines carbon fiber, PMI, glass fiber, and an aluminum dustcap.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermal Management:\u003c\/strong\u003e Uses a composite former, heat-sink structure, and cooling fins.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe T1S2-10P uses a die-cast aluminum frame with integrated heat-sink fins, a detachable die-cast aluminum trim ring, and corrosion-resistant tin-plated brass push terminals. Its cone assembly uses a chemically bonded co-molded surround, symmetrical braided flat tinsel leads, and dual Nomex progressive spiders. The subwoofer accepts speaker wire through 10 AWG slot-loaded terminals.\u003c\/p\u003e\u003cp\u003eInstall the T1S2-10P in a rigid ported enclosure with a net internal volume between 1.0 and 1.50 cubic feet after allowing for woofer and port displacement. The recommended ported design is 1.25 cubic feet net, tuned to 40 Hz, using a 4-inch diameter by 13.75-inch long port. Confirm a 9.13-inch cutout and at least 3.01 inches of mounting depth, then use an infrasonic filter 5-10 Hz below enclosure tuning for vented operation.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768055357631,"sku":"T1S2-10P","price":437.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71dfrbr_vCL_d87df010-dd26-4366-b93b-7d4e18f29f67.jpg?v=1782270661"},{"product_id":"rockford-fosgate-t1s2-10s","title":"Rockford Fosgate T1S2-10S 10\" 2-Ohm Slim Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate T1S2-10S is a shallow-mount 10-inch subwoofer designed for systems where enclosure depth and cargo space are limited. Its single 2-ohm voice coil and 500-watt RMS power rating make it suitable for a dedicated mono amplifier setup. It is optimized for compact sealed enclosures, making it a practical choice for trucks, coupes, SUVs, and other tight installation locations.\u003c\/p\u003e\u003cp\u003eThis T1 Slim sealed version is engineered for controlled low-frequency output in closed cabin environments. Its 27-250 Hz frequency response and 15 mm Xmax support deep bass reproduction while retaining a compact 3.01-inch mounting depth. The sealed-enclosure alignment is intended for listeners who want a space-conscious bass upgrade with defined, responsive output.\u003c\/p\u003e\u003cp\u003eRockford Fosgate uses a high-energy neodymium motor structure and an integrated heat-sink die-cast aluminum frame to manage heat in the shallow design. The 2.5-inch single voice coil uses pure copper windings and a composite former intended to reduce thermal buildup and motor-related distortion. A multi-vent pole structure and aluminum spider spacer further support cooling during sustained operation.\u003c\/p\u003e\u003cp\u003eThe woofer combines a linear carbon fiber, PMI, and glass-fiber cone with an aluminum dustcap. Its supercritical synthetic organic polymer surround is chemically bonded to the cone body, while dual progressive Nomex spiders help control excursion. Braided flat tinsel leads are designed to remain flexible through repeated cone movement.\u003c\/p\u003e\u003cp\u003eThe T1S2-10S is designed as a component subwoofer, so it requires a separate enclosure, amplifier, wiring, and source signal. A sealed enclosure with 0.5 to 0.75 cubic feet of net internal volume is specified for this model. With its 2-ohm nominal load, it should be matched with an amplifier that is stable at 2 ohms and appropriately configured for its 500-watt RMS rating.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow 10-Inch Design:\u003c\/strong\u003e Fits installations with limited mounting depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed-Enclosure Optimization:\u003c\/strong\u003e Designed for compact sealed subwoofer boxes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500-Watt RMS Rating:\u003c\/strong\u003e Supports substantial continuous amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 2-Ohm Voice Coil:\u003c\/strong\u003e Provides a fixed 2-ohm nominal load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Motor Structure:\u003c\/strong\u003e Helps achieve shallow depth with thermal capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon Fiber Composite Cone:\u003c\/strong\u003e Combines rigid cone materials with an aluminum dustcap.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe T1S2-10S uses a die-cast aluminum basket with integrated heat-sink fins, a high-energy neodymium motor, and a removable die-cast aluminum trim ring. Its cone is made from carbon fiber, PMI, and glass fiber, paired with an aluminum dustcap and chemically bonded polymer surround. Dual Nomex progressive spiders, stitched tinsel leads, and a vented motor assembly support controlled movement and heat dissipation.\u003c\/p\u003e\u003cp\u003ePlan for a 9.13-inch cutout and 3.01 inches of mounting depth, plus adequate rear clearance for wiring and ventilation. Use a rigid sealed enclosure with 0.5 to 0.75 cubic feet of net internal volume after woofer displacement, and connect it to an amplifier suitable for a 2-ohm load. The speaker uses 10 AWG slot-loaded terminals; installation hardware and a 5 mm driver bit are included.\u003c\/p\u003e","brand":"ROCKFORD FOSGATE","offers":[{"title":"Default Title","offer_id":45768055423167,"sku":"T1S2-10S","price":437.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/6252\/4351\/files\/71dfrbr_vCL_d27bbac9-b7c7-458c-b088-358921f42d52.jpg?v=1782270663"}],"url":"https:\/\/nsidistributor.com\/collections\/10-inch-subwoofers.oembed?page=5","provider":"NSI Audio Distributing","version":"1.0","type":"link"}